Refractometric sensing using propagating versus localized surface plasmons: a direct comparison

Recent advances in receptor-based optical biosensors for the detection of multiplex biomarkers

Multiplex biosensors are highly sought-after tools in disease diagnosis. This technique involves the simultaneous sensing of multiple biomarkers, whose levels and ratios can provide a more comprehensive assessment of disease conditions compared to single biomarker detection. In most diseases like cancer due to its complexity, several biomarkers are involved in their occurrence. On the other hand, a single biomarker may be implicated in various diseases. Multiplex sensing employs various techniques, such as optical, electrochemical, and electrochemiluminescence methods. This comprehensive review focuses on optical multiplex sensing techniques, including surface plasmon resonance, localized surface plasmon resonance, fluorescence resonance energy transfer, chemiluminescence, surface-enhanced Raman spectroscopy, and photonic crystal sensors. The review delves into their mechanisms, materials utilized, and strategies for biomarker detection.

LSPR-Based Biosensing Enables the Detection of Antimicrobial Resistance Genes

The development of rapid, simple, and accurate bioassays for the detection of nucleic acids has received increasing demand in recent years. Here, localized surface plasmon resonance (LSPR) spectroscopy for the detection of an antimicrobial resistance gene, sulfhydryl variable β-lactamase (blaSHV), which confers resistance against a broad spectrum of β-lactam antibiotics is used. By performing limit of detection experiments, a 23 nucleotide (nt) long deoxyribonucleic acid (DNA) sequence down to 25 nm was detected, whereby the signal intensity is inversely correlated with sequence length (23, 43, 63, and 100 nt). In addition to endpoint measurements of hybridization events, the setup also allowed to monitor the hybridization events in real-time, and consequently enabled to extract kinetic parameters of the studied binding reaction. Performing LSPR measurements using single nucleotide polymorphism (SNP) variants of blaSHV revealed that these sequences can be distinguished from the fully complementary sequence. The possibility to distinguish such sequences is of utmost importance in clinical environments, as it allows to identify mutations essential for enzyme function and thus, is crucial for the correct treatment with antibiotics. Taken together, this system provides a robust, label-free, and cost-efficient analytical tool for the detection of nucleic acids and will enable the surveillance of antimicrobial resistance determinants.

Dual AuNPs detecting probe enhanced the NanoSPR effect for the high-throughput detection of the cancer microRNA21 biomarker

The microRNA21 (miR-21), a specific tumor biomarker, is crucial for the diagnosis of several cancer types, and investigation of its overexpression pattern is important for cancer diagnosis. Herein, we report a low-cost, rapid, ultrasensitive, and convenient biosensing strategy for the detection of miR-21 using a nanoplasmonic array chip coupled with gold nanoparticles (AuNPs). This sensing platform combines the surface plasmon resonance effect of nanoplasmonics (NanoSPR) and the localized surface plasmon resonance (LSPR) effect, which allows the real-time monitoring of the subtle optical density (OD) changes caused by the variations in the dielectric constant in the process of the hybridization of the target miRNA. Using this method, the miRNA achieves a broad detection range from 100 aM to 1 μM, and with a limit of detection (LoD) of 1.85 aM. Furthermore, this assay also has a single-base resolution to discriminate the highly homologous miRNAs. More importantly, this platform has high throughput characteristics (96 samples can be detected simultaneously). This strategy exhibits more than 86.5 times enhancement in terms of sensitivity compared to that of traditional biosensors.

Tungsten-based Nanomaterials in the Biomedical Field: A Bibliometric Analysis of Research Progress and Prospects

Tungsten-based nanomaterials (TNMs) with diverse nanostructures and unique physicochemical properties have been widely applied in the biomedical field. Although various reviews have described the application of TNMs in specific biomedical fields, there are still no comprehensive studies that summarize and analyze research trends of the field as a whole. To identify and further promote the development of biomedical TNMs, a bibliometric analysis method is used to analyze all relevant literature on this topic. First, general bibliometric distributions of the dataset by year, country, institute, referenced source, and research hotspots are recognized. Next, a comprehensive review of the subjectively recognized research hotspots in various biomedical fields, including biological sensing, anticancer treatments, antibacterials, and toxicity evaluation, is provided. Finally, the prospects and challenges of TNMs are discussed to provide a new perspective for further promoting their development in biomedical research.

Magnetoplasmonics beyond Metals: Ultrahigh Sensing Performance in Transparent Conductive Oxide Nanocrystals

Active modulation of the plasmonic response is at the forefront of today's research in nano-optics. For a fast and reversible modulation, external magnetic fields are among the most promising approaches. However, fundamental limitations of metals hamper the applicability of magnetoplasmonics in real-life active devices. While improved magnetic modulation is achievable using ferromagnetic or ferromagnetic-noble metal hybrid nanostructures, these suffer from severely broadened plasmonic response, ultimately decreasing their performance. Here we propose a paradigm shift in the choice of materials, demonstrating for the first time the outstanding magnetoplasmonic performance of transparent conductive oxide nanocrystals with plasmon resonance in the near-infrared. We report the highest magneto-optical response for a nonmagnetic plasmonic material employing F- and In-codoped CdO nanocrystals, due to the low carrier effective mass and the reduced plasmon line width. The performance of state-of-the-art ferromagnetic nanostructures in magnetoplasmonic refractometric sensing experiments are exceeded, challenging current best-in-class localized plasmon-based approaches.

Hyperbolic-Metamaterials-Based SPR Temperature Sensor Enhanced by a Nanodiamond-PDMS Hybrid for High Sensitivity and Fast Response

A high-performance surface plasmon resonance (SPR) fiber sensor is proposed with hyperbolic metamaterials (HMMs), nanodiamonds (NDs), and polydimethylsiloxane (PDMS) to enhance the temperature sensitivity and response time. The HMM with tunable dispersion can break through the structural limitations of the optical fiber to improve the refractive index (RI) sensitivity, while NDs and PDMS with large thermo-optic coefficients enable to induce significant RI change under varied thermal fields. The ternary composite endows the sensor with a high temperature sensitivity of -9.021 nm/°C, which is 28.6 times higher than that of the conventional gold film-based SPR sensor. Furthermore, NDs with high thermal conductivity (2200 W/mK) effectively expedite the thermal response of PDMS, which reduces the response time from 80 to 6 s. It is believed that the proposed sensors with high sensitivity, fast response time, and compact size have great potential for applications in industrial production, healthcare, environmental monitoring, etc.

Coupling plasmon-waveguide resonance and multiple plasma modes in hyperbolic metamaterials for high-performance sensing

A sensor based on plasmon-waveguide resonance (PWR) exhibits an impressive narrow linewidth and has attracted extensive attention in plasmon label-free sensing. However, the low surface electric field intensity limits the detection ability of biomolecules, where the refractive index changes are restricted at the sensor surface. In this study, we study the coupling of PWR and multiple plasma modes in a hyperbolic metamaterial (HMM), combining narrow linewidth and electric field enhancement advantages. The PWR-HMM sensor includes a gold film, lossless dielectric layer, and metal/dielectric multilayer HMM array composed of 2-layer Au/Al₂O₃stacks. The evanescent field of PWR is used to excite multiple plasma modes in the HMM. The figure of merit of the proposed structure reaches 5417/RIU owing to the existence of lossless dielectric layer, which is 11.7 times than the conventional gold film structure. The maximum bulk sensitivity of the PWR-HMM sensor was 43 000 nm/RIU. In comparison with PWR, the surface electric field intensity and the surface sensitivity of PWR-HMM increase by four and two times, respectively. Furthermore, comparing the sensing performance of the PWR-HMM sensor and PWR-nanoparticle (NP) sensor (coupling PWR and localized surface plasmon resonance), it was found that PWR-HMM has 20% higher surface sensitivity than the PWR-NP. A sensing mechanism coupling PWR and multiple plasma modes in the HMMs opens a gate to significantly improve the PWR sensors performance, which is expected to be used to resolve urgent issues in biological, medical and clinical applications.

Opportunities and Challenges for Alternative Nanoplasmonic Metals: Magnesium and Beyond

Materials that sustain localized surface plasmon resonances have a broad technology potential as attractive platforms for surface-enhanced spectroscopies, chemical and biological sensing, light-driven catalysis, hyperthermal cancer therapy, waveguides, and so on. Most plasmonic nanoparticles studied to date are composed of either Ag or Au, for which a vast array of synthetic approaches are available, leading to controllable size and shape. However, recently, alternative materials capable of generating plasmonically enhanced light-matter interactions have gained prominence, notably Cu, Al, In, and Mg. In this Perspective, we give an overview of the attributes of plasmonic nanostructures that lead to their potential use and how their performance is dictated by the choice of plasmonic material, emphasizing the similarities and differences between traditional and emerging plasmonic compositions. First, we discuss the materials limitation encapsulated by the dielectric function. Then, we evaluate how size and shape maneuver localized surface plasmon resonance (LSPR) energy and field distribution and address how this impacts applications. Next, biocompatibility, reactivity, and cost, all key differences underlying the potential of non-noble metals, are highlighted. We find that metals beyond Ag and Au are of competitive plasmonic quality. We argue that by thinking outside of the box, i.e., by looking at nonconventional materials such as Mg, one can broaden the frequency range and, more importantly, combine the plasmonic response with other properties essential for the implementation of plasmonic technologies.

Pedestal High-Contrast Gratings for Biosensing

High-contrast gratings (HCG) are an excellent candidate for label-free detection of various kinds of biomarkers because they exhibit sharp and sensitive optical resonances. In this work, we experimentally show the performance of pedestal HCG (PHCG), which is significantly enhanced in comparison with that of conventional HCG. PCHGs were found to provide a 11.2% improvement in bulk refractive index sensitivity, from 482 nm/RIU for the conventional design to 536 nm/RIU. The observed resonance was narrower, resulting in a higher Q-factor and figure of merit. By depositing Al2O3, HfO2, and TiO2 of different thicknesses as model analyte layers, surface sensitivity values were estimated to be 10.5% better for PHCG. To evaluate the operation of the sensor in solution, avidin was employed as a model analyte. For avidin detection, the surface of the HCG was first silanized and subsequently functionalized with biotin, which is well known for its ability to bind selectively to avidin. A consistent red shift was observed with the addition of each of the functional layers, and the analysis of the spectral shift for various concentrations of avidin made it possible to calculate the limit of detection (LoD) and limit of quantification (LoQ) for the structures. PHCG showed a LoD of 2.1 ng/mL and LoQ of 85 ng/mL, significantly better than the values 3.2 ng/mL and 213 ng/mL respectively, obtained with the conventional HCG. These results demonstrate that the proposed PHCG have great potential for biosensing applications, particularly for detecting and quantifying low analyte concentrations.

All-Dielectric Metasurface Based on Complementary Split-Ring Resonators for Refractive Index Sensing

Thanks to their lower losses and sharper resonances compared to their metallic counterparts, all-dielectric metasurfaces are attracting a quickly growing research interest. The application of such metasurfaces in the field of refractive index sensing is extremely attractive, especially due to the expected high performance and the simplicity of the sensing element excitation and readout. Herein, we report on an all-dielectric silicon metasurface based on complementary split-ring resonators (CSRRs) optimized for refractive index sensing. A quasi-bound state in the continuum (quasi-BIC) with an ultra-high quality factor can be excited in the near-infrared (NIR) window by violating the structure symmetry. By using the three-dimensional finite element method (3D-FEM), a refractive index sensor for biomedical applications with an ultra-high figure of merit (FoM > 100,000 RIU−1) has been designed, exploiting the quasi-BIC resonance. The proposed design strategy opens new avenues for developing flat biochemical sensors that are accurate and responsive in real time.

Circular Polarization Conversion in Single Plasmonic Spherical Particles

Temporal and spectral behaviors of plasmons determine their ability to enhance the characteristics of metamaterials tailored to a wide range of applications, including electric-field enhancement, hot-electron injection, sensing, as well as polarization and angular momentum manipulation. We report a dark-field (DF) polarimetry experiment on single particles with incident circularly polarized light in which gold nanoparticles scatter with opposite handedness at visible wavelengths. Remarkably, for silvered nanoporous silica microparticles, the handedness conversion occurs at longer visible wavelengths, only after adsorption of molecules on the silver. Finite element analysis (FEA) allows matching the circular polarization (CP) conversion to dominant quadrupolar contributions, determined by the specimen size and complex susceptibility. We hypothesize that the damping accompanying the adsorption of molecules on the nanostructured silver facilitates the CP conversion. These results offer new perspectives in molecule sensing and materials tunability for light polarization conversion and control of light spin angular momentum at submicroscopic scale.

Surface Plasmon Resonance of Two-Dimensional Gold Colloidal Crystals Formed on Gold Plates

The free electrons inside precious metals such as Au vibrate when the surface of the metal is irradiated with an electromagnetic wave of an appropriate frequency. This oscillation is referred to as surface plasmon resonance (SPR), and the resonance frequency varies with permittivity of the medium around the metal. SPR sensors are widely applied in the fields of bioscience and pharmaceutical sciences, including biosensing for drug discovery, biomarker screening, virus detection, and testing for food safety. Here, we fabricated a metal-insulator-metal (MIM) SPR sensor by constructing two-dimensional (2D) regular array of Au colloidal particles (2D colloidal crystals) on an insulator layer over a thin Au film coated on a glass substrate surface. The 2D crystals were fabricated by electrostatically adsorbing negatively charged three-dimensional crystals onto a positively charged thin insulator formed on Au film. The plasmon peaks/dips from the MIM structure were measured in aqueous solutions of ethylene glycol (EG) at various concentrations. Multiple plasmon peaks/dips were observed due to the localized SPR (LSPR) of the Au particles and the Fano resonance between the Au particles and thin film. The plasmon peaks/dips shifted to higher wavelengths on increasing EG concentrations due to an increase in the refractive index of the media. The observed peak/dip shift was approximately twice that of LSPR from an isolated Au particle. We expect the present MIM substrate will be useful as a highly sensitive sensor in the pharmaceutical field.

Alcohol Sensor Based on Surface Plasmon Resonance of ZnO Nanoflowers/Au Structure

Alcohol detection plays a key role in food processing and monitoring. Therefore, we present a fast, high reproducibility and label-free characteristics alcohol photochemical sensor based on the surface plasmon resonance (SPR) effect. By growing ZnO nanoflowers on Au film, the SPR signal red-shifted in the visible region as the alcohol concentration increased. More interestingly, the sensitivity improved to 127 nm/%, which is attributed to the ZnO nanoflowers/Au structure. The goodness of the linear fit was more than 0.99 at a range from 0 vol% to 95 vol% which ensures detection resolution. Finally, a practical application for distinguishing five kinds of alcoholic drinks has been demonstrated. The excellent sensing characteristics also indicate the potential of the device for applications in the direction of food processing and monitoring, and the simple structure fabrication and economic environmental protection make it more attractive.

Maximizing the Surface Sensitivity of LSPR Biosensors through Plasmon Coupling-Interparticle Gap Optimization for Dimers Using Computational Simulations

The bulk and surface refractive index sensitivities of LSPR biosensors, consisting of coupled plasmonic nanosphere and nano-ellipsoid dimers, were investigated by simulations using the boundary element method (BEM). The enhancement factor, defined as the ratio of plasmon extinction peak shift of multi-particle and single-particle arrangements caused by changes in the refractive index of the environment, was used to quantify the effect of coupling on the increased sensitivity of the dimers. The bulk refractive index sensitivity (RIS) was obtained by changing the dielectric medium surrounding the nanoparticles, while the surface sensitivity was modeled by depositing dielectric layers on the nanoparticle in an increasing thickness. The results show that by optimizing the interparticle gaps for a given layer thickness, up to ~80% of the optical response range of the nanoparticles can be utilized by confining the plasmon field between the particles, which translates into an enhancement of ~3-4 times compared to uncoupled, single particles with the same shape and size. The results also show that in these cases, the surface sensitivity enhancement is significantly higher than the bulk RI sensitivity enhancement (e.g., 3.2 times vs. 1.8 times for nanospheres with a 70 nm diameter), and thus the sensors' response for molecular interactions is higher than their RIS would indicate. These results underline the importance of plasmonic coupling in the optimization of nanoparticle arrangements for biosensor applications. The interparticle gap should be tailored with respect to the size of the used receptor/target molecules to maximize the molecular sensitivity, and the presented methodology can effectively aid the optimization of fabrication technologies.

High-performance plasmonic lab-on-fiber sensing system constructed by universal polymer assisted transfer technique

Plasmonic lab-on-fiber (LOF) system has become an emerging sensing platform for the realization of miniaturized and portable plasmonic sensors. Herein, a facile and efficient polymer assisted transfer technique was reported for the preparation of plasmonic LOF systems. The proposed plasmonic LOF system was constructed through transferring plasmonic arrays to the end surface of optical fibers using polylactic acid as the sacrificial layer. The morphology of the transferred plasmonic arrays maintains excellent consistency with the original arrays. Importantly, the as-prepared plasmonic LOF system also possesses outstanding sensing performance in refractive index sensing and quantitative label-free biosensing applications. Additionally, the proposed polymer assisted transfer technique shows broad universality for various plasmonic arrays. Together with the above features, it is believed that the polymer assisted transfer technique will show great potential for the application of future plasmonic LOF systems.

Nanoplasmonic biosensors: Theory, structure, design, and review of recent applications

Nanoplasmonic biosensing shows an immense potential to satisfy the needs of the global health industry - low-cost, fast, and portable automated systems; highly sensitive and real-time detection; multiplexing and miniaturization. In this review, we presented the theory of nanoplasmonic biosensing for popular detection schemes - SPR, LSPR, and EOT - and underline the consideration for nanostructure design, material selection, and their effects on refractometric sensing performance. Later, we covered the bottom-up and top-down nanofabrication methods for nanoplasmonic biosensors. Subsequently, we reviewed the recent examples of nanoplasmonic biosensors over a wide range of clinically relevant analytes in the diagnosis and prognosis of a wide range of diseases and conditions such as biomarker proteins, infectious bacteria, viral agents. Finally, we discussed the challenges of nanoplasmonic biosensing toward clinical translation and proposed strategic avenues to be competitive against current clinical detection methods. Hopefully, nanoplasmonic biosensing can realize its potential through successful demonstrations of clinical translation in the upcoming years.

Surface Plasmon Resonance (SPR)- and Localized SPR (LSPR)-Based Virus Sensing Systems: Optical Vibration of Nano- and Micro-Metallic Materials for the Development of Next-Generation Virus Detection Technology

The global damage that a widespread viral infection can cause is evident from the ongoing COVID-19 pandemic. The importance of virus detection to prevent the spread of viruses has been reaffirmed by the pandemic and the associated social and economic damage. Surface plasmon resonance (SPR) in microscale and localized SPR (LSPR) in nanoscale virus sensing systems are thought to be useful as next-generation detection methods. Many studies have been conducted on ultra-sensitive technologies, especially those based on signal amplification. In some cases, it has been reported that even a low viral load can be measured, indicating that the virus can be detected in patients even in the early stages of the viral infection. These findings corroborate that SPR and LSPR are effective in minimizing false-positives and false-negatives that are prevalent in the existing virus detection techniques. In this review, the methods and signal responses of SPR and LSPR-based virus detection technologies are summarized. Furthermore, this review surveys some of the recent developments reported and discusses the limitations of SPR and LSPR-based virus detection as the next-generation detection technologies.

Single plasmonic nanostructures for biomedical diagnosis

The field of single nanoparticle plasmonics has grown enormously. There is no doubt that a wide diversity of the nanoplasmonic techniques and nanostructures represents a tremendous opportunity for fundamental biomedical studies as well as sensing and imaging applications. Single nanoparticle plasmonic biosensors are efficient in label-free single-molecule detection, as well as in monitoring real-time binding events of even several biomolecules. In the present review, we have discussed the prominent advantages and advances in single particle characterization and synthesis as well as new insight into and information on biomedical diagnosis uniquely obtained using single particle approaches. The approaches include the fundamental studies of nanoplasmonic behavior, two typical methods based on refractive index change and characteristic light intensity change, exciting innovations of synthetic strategies for new plasmonic nanostructures, and practical applications using single particle sensing, imaging, and tracking. The basic sphere and rod nanostructures are the focus of extensive investigations in biomedicine, while they can be programmed into algorithmic assemblies for novel plasmonic diagnosis. Design of single nanoparticles for the detection of single biomolecules will have far-reaching consequences in biomedical diagnosis.

Hybridized surface lattice modes in intercalated 3-disk plasmonic crystals for high figure-of-merit plasmonic sensing

Engineering the spectral lineshape of plasmonic modes by various electromagnetic couplings and mode interferences enables significant improvements for plasmonic sensing. However, bulk and surface sensitivities remain constrained by a trade-off arising from their respective dependence on the interaction volume and decay length of the plasmonic mode, making higher bulk sensitivity realized at the expense of reduced surface sensitivity. We propose a new approach to overcome this trade-off by combining near-field and far-field coupling in an intercalated 3-disk plasmonic crystal, where ∼10× higher figure of merit (FoM) and ∼2× higher surface sensitivity can be achieved, in comparison with those achievable by localized surface plasmons. A plasmonic mode with a Q-factor up to ∼110 is demonstrated based on gold 3-disk arrays in the visible spectrum, with a bulk FoM of ∼24 and a surface sensitivity prefactor of ∼13.56. The design and fabrication simplicity of the 3-disk structure highlight its potential for a robust plasmonic sensing platform with a high figure of merit.

Nanoengineering Approaches Toward Artificial Nose

Significant scientific efforts have been made to mimic and potentially supersede the mammalian nose using artificial noses based on arrays of individual cross-sensitive gas sensors over the past couple decades. To this end, thousands of research articles have been published regarding the design of gas sensor arrays to function as artificial noses. Nanoengineered materials possessing high surface area for enhanced reaction kinetics and uniquely tunable optical, electronic, and optoelectronic properties have been extensively used as gas sensing materials in single gas sensors and sensor arrays. Therefore, nanoengineered materials address some of the shortcomings in sensitivity and selectivity inherent in microscale and macroscale materials for chemical sensors. In this article, the fundamental gas sensing mechanisms are briefly reviewed for each material class and sensing modality (electrical, optical, optoelectronic), followed by a survey and review of the various strategies for engineering or functionalizing these nanomaterials to improve their gas sensing selectivity, sensitivity and other measures of gas sensing performance. Specifically, one major focus of this review is on nanoscale materials and nanoengineering approaches for semiconducting metal oxides, transition metal dichalcogenides, carbonaceous nanomaterials, conducting polymers, and others as used in single gas sensors or sensor arrays for electrical sensing modality. Additionally, this review discusses the various nano-enabled techniques and materials of optical gas detection modality, including photonic crystals, surface plasmonic sensing, and nanoscale waveguides. Strategies for improving or tuning the sensitivity and selectivity of materials toward different gases are given priority due to the importance of having cross-sensitivity and selectivity toward various analytes in designing an effective artificial nose. Furthermore, optoelectrical sensing, which has to date not served as a common sensing modality, is also reviewed to highlight potential research directions. We close with some perspective on the future development of artificial noses which utilize optical and electrical sensing modalities, with additional focus on the less researched optoelectronic sensing modality.

Spectral Characterization of Mid-Infrared Bloch Surface Waves Excited on a Truncated 1D Photonic Crystal

The many fundamental roto-vibrational resonances of chemical compounds result in strong absorption lines in the mid-infrared region (λ ∼ 2-20 μm). For this reason, mid-infrared spectroscopy plays a key role in label-free sensing, in particular, for chemical recognition, but often lacks the required sensitivity to probe small numbers of molecules. In this work, we propose a vibrational sensing scheme based on Bloch surface waves (BSWs) on 1D photonic crystals to increase the sensitivity of mid-infrared sensors. We report on the design and deposition of CaF₂/ZnS 1D photonic crystals. Moreover, we theoretically and experimentally demonstrate the possibility to sustain narrow σ-polarized BSW modes together with broader π-polarized modes in the range of 3-8 μm by means of a customized Fourier transform infrared spectroscopy setup. The multilayer stacks are deposited directly on CaF₂ prisms, reducing the number of unnecessary interfaces when exciting in the Kretschmann-Raether configuration. Finally, we compare the performance of mid-IR sensors based on surface plasmon polaritons with the BSW-based sensor. The figures of merit found for BSWs in terms of confinement of the electromagnetic field and propagation length puts them as forefrontrunners for label-free and polarization-dependent sensing devices.

Nanoparticle enhanced optical biosensing technologies for Prostate Specific Antigen biomarker detection

Prostate Cancer (PCa) is one of the deadliest forms of Cancer among men. Early screening process for PCa is primarily conducted with the help of a FDA approved biomarker known as Prostate Specific Antigen (PSA). The PSA-based screening is challenged with the inability to differentiate between the cancerous PSA and Benign Prostatic Hyperplasia (BPH), resulting in high rates of false-positives. Optical techniques such as optical absorbance, scattering, surface plasmon resonance (SPR), and fluorescence have been extensively employed for Cancer diagnostic applications. One of the most important diagnostic applications involves utilization of nanoparticles (NPs) for highly specific, sensitive, rapid, multiplexed, and high performance Cancer detection and quantification. The incorporation of NPs with these optical biosensing techniques allow realization of low cost, point-of-care, highly sensitive, and specific early cancer detection technologies, especially for PCa. In this work, the current state-of-the-art, challenges, and efforts made by the researchers for realization of low cost, point-of-care (POC), highly sensitive, and specific NP enhanced optical biosensing technologies for PCa detection using PSA biomarker are discussed and analyzed.

A new ultralow fouling surface for the analysis of human plasma samples with surface plasmon resonance

Surface plasmon resonance (SPR) has been widely used to detect a variety of biomolecular systems, but only a small fraction of applications report on the analysis of patients' samples. A critical barrier to the full implementation of SPR technology in molecular diagnostics currently exists for its potential application to analyze blood plasma or serum samples. Such capability is mostly hindered by the non-specific adsorption of interfering species present in the biological sample at the functional interface of the biosensor, often referred to as fouling. Suitable polymeric layers having a thickness ranging from 15 and about 70 nm are usually deposited on the active surface of biosensors to introduce antifouling properties. A similar approach is not fully adequate for SPR detection where the exponential decay of the evanescent plasmonic field limits the thickness of the layer beyond the SPR metallic sensor surface for which a sensitive detection can be obtained. Here, a triethylene glycol (PEG(3))-pentrimer carboxybetaine system is proposed to fabricate a new surface coating bearing excellent antifouling properties with a thickness of less than 2 nm, thus compatible with sensitive SPR detection. The high variability of experimental conditions described in the literature for the quantitative assessment of the antifouling performances of surface layers moved us to compare the superior antifouling capacity of the new pentrimeric system with that of 4-aminophenylphosphorylcholine, PEG-carboxybetaine and sulfobetaine-modified surface layers, respectively, using undiluted and diluted pooled human plasma samples. The use of the new coating for the immunologic SPRI biosensing of human arginase 1 in plasma is also presented.

Portable and field-deployed surface plasmon resonance and plasmonic sensors

Plasmonic sensors are ideally suited for the design of small, integrated, and portable devices that can be employed in situ for the detection of analytes relevant to environmental sciences, clinical diagnostics, infectious diseases, food, and industrial applications. To successfully deploy plasmonic sensors, scaled-down analytical devices based on surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) must integrate optics, plasmonic materials, surface chemistry, fluidics, detectors and data processing in a functional instrument with a small footprint. The field has significantly progressed from the implementation of the various components in specifically designed prism-based instruments to the use of nanomaterials, optical fibers and smartphones to yield increasingly portable devices, which have been shown for a number of applications in the laboratory and deployed on site for environmental, biomedical/clinical, and food applications. A roadmap to deploy plasmonic sensors is provided by reviewing the current successes and by laying out the directions the field is currently taking to increase the use of field-deployed plasmonic sensors at the point-of-care, in the environment and in industries.

High-performance plasmonic refractive index sensors via synergy between annealed nanoparticles and thin films

Plasmonic nanostructure-based refractive index (RI) sensors are the core component of biosensor systems and play an increasingly important role in the diagnosis of human disease. However, the costs of traditional plasmonic RI sensors are not acceptable to everyone due to their expensive fabrication process. Here, a novel low-cost and high-performance visible-light RI sensor with a particle-on-film configuration was experimentally demonstrated. The sensor was fabricated by transferring annealed Au nanoparticles (NPs) onto a thin gold film with polymethyl methacrylate (PMMA) as a support. RI sensitivities of approximately 209 nm/RIU and 369 nm/RIU were achieved by reflection and transmission spectrum measurements, respectively. The high sensitivity is due to the strong plasmon-mediated energy confinement within the interface between the particles and the film. The possibility of wafer-scale production and high working stability achieved by the transfer process, together with the high sensitivity to the environmental RI, provides an extensive impact on the realization of universal biosensors for biological applications.

Optimization of Au:CuO Nanocomposite Thin Films for Gas Sensing with High-Resolution Localized Surface Plasmon Resonance Spectroscopy

Gas sensing based on bulk refractive index (RI) changes, has been a challenging task for localized surface plasmon resonance (LSPR) spectroscopy, presenting only a limited number of reports in this field. In this work, it is demonstrated that a plasmonic thin film composed of Au nanoparticles embedded in a CuO matrix can be used to detect small changes (as low as 6 × 10^-5 RIU) in bulk RI of gases at room temperature, using a high-resolution LSPR spectroscopy system. To optimize the film's surface, a simple Ar plasma treatment revealed to be enough to remove the top layers of the film and to partially expose the embedded nanoparticles, and thus enhance the film's gas sensing capabilities. The treated sample exhibits high sensitivity to inert gases (Ar, N₂), presenting a refractive index sensitivity (RIS) to bulk RI changes of 425 nm/RIU. Furthermore, a 2-fold signal increase is observed for O₂, showing that the film is clearly more sensitive to this gas due to its oxidizing nature. The results showed that the Au:CuO thin film system is a RI sensitive platform able to detect inert gases, which can be more sensitive to detect noninert gases as O₂ or even other reactive species.

Large Scale Fabrication of Ordered Gold Nanoparticle-Epoxy Surface Nanocomposites and Their Application as Label-Free Plasmonic DNA Biosensors

A robust and scalable technology to fabricate ordered gold nanoparticle arrangements on epoxy substrates is presented. The nanoparticles are synthesized by solid-state dewetting on nanobowled aluminum templates, which are prepared by the selective chemical etching of porous anodic alumina (PAA) grown on an aluminum sheet with controlled anodic oxidation. This flexible fabrication technology provides proper control over the nanoparticle size, shape, and interparticle distance over a large surface area (several cm²), which enables the fine-tuning and optimization of their plasmonic absorption spectra for LSPR and SERS applications between 535 and 625 nm. The nanoparticles are transferred to the surface of epoxy substrates, which are subsequently selectively etched. The resulting nanomushrooms arrangements consist of ordered epoxy nanopillars with flat, disk-shaped nanoparticles on top, and their bulk refractive index sensitivity is between 83 and 108 nm RIU^-1. Label-free DNA detection is successfully demonstrated with the sensors by using a 20 base pair long specific DNA sequence from the parasite Giardia lamblia. A red-shift of 6.6 nm in the LSPR absorbance spectrum was detected after the 2 h hybridization with 1 μM target DNA, and the achievable LOD was around 5 nM. The reported plasmonic sensor is one of the first surface AuNP/polymer nanocomposites ever reported for the successful label-free detection of DNA.

Self-assembly plasmonic metamaterials based on templated annealing for advanced biosensing

In this paper, we introduce a novel method for the fabrication of self-assembly plasmonic metamaterials by exploiting fluid instabilities of optical thin films. Due to interplay between template reflow and spinodal dewetting, two metal nanoparticles of different sizes are generated on the top mesas of free-standing porous anodic aluminum oxide (AAO) template, which results in the apprearance of double resonant peaks in the extinction spectrum. These two resonant peaks possess refractive index resolution 3.27 × 10^-4 and 2.53 × 10^-4 RIU, respectively. This optical intensity modulation based plasmonic nanoplatform shows a dramatically surface sensing performance with outstanding detection capacity of biomolecules, because of the very small decay length of electric field at dual-modes. The detection ability for concanavalin A (Con A) demonstrats that the limit of detection of dual-modes reaches as small as 68 and 79 nM, respectively.

Hybrid metal-graphene plasmonic sensor for multi-spectral sensing in both near- and mid-infrared ranges

This paper proposes a hybrid metal-graphene plasmonic sensor which can simultaneously perform multi-spectral sensing in near- and mid-IR ranges. The proposed sensor consists of an array of asymmetric gold nano-antennas integrated with an unpatterned graphene sheet. The gold antennas support sharp Fano-resonances for near-IR sensing while the excitation of graphene plasmonic resonances extend the sensing spectra to the mid-IR range. Such a broadband spectral range goes far beyond previously demonstrated multi-spectral plasmonic sensors. The sensitivity and figure of merit (FOM) as well as their dependence on the thickness of the sensing layer and Fermi energy of graphene are studied systematically. This new type of sensor combines the advantages of conventional metallic plasmonic sensors and graphene plasmonic sensors and may open a new door for high-performance, multi-functional plasmonic sensing.

Dual nanotransfer printing for complementary plasmonic biosensors

One of the main challenges in the widespread utilization of localized plasmon resonance-based biosensors is the fabrication of large-area and low-cost plasmonic nanostructures. In this work, we fabricated large-area and low-cost complementary plasmonic biosensors such as nanohole and nanodisk arrays using dual nanotransfer printing (NTP) with a single metal deposition and a single reusable mold. The suspended nanohole arrays and the suspended nanodisk arrays were fabricated using the subsequent dry etching process. We confirmed a maximum enhancement in bulk sensitivity in experiments and simulations by controlling the vertical and lateral etching depths of the dielectric layer underneath the gold (Au) nanohole and nanodisk arrays. Furthermore, we show that the surface sensitivity evaluated by atomic layer deposition of aluminum oxide increased because appropriate vertical and lateral etching depths allow the target analyte to access the additional near-field formed at the bottom of the Au nanostructure. The dual NTP method provides a practical solution for the realization of large-area and low-cost label-free plasmonic biosensing systems, with a reduction in complexity and cost of the fabrication process of complementary plasmonic structures and metasurfaces.

Metallic photonic crystal-based sensor for cryogenic environments

We investigate the design, characterization, and application of metallic photonic crystal (MPC) structures, consisting of plasmonic gold nanogratings on top of a photonic waveguide, as transducers for lab-on-chip biosensing in cryogenic environments. The compact design offers a promising approach to sensitive, in situ biosensing platforms for astrobiology applications (e.g., on the "icy moons" of the outer solar system). We fabricated and experimentally characterized three MPC sensor geometries, with variable nanograting width, at temperatures ranging from 300 K to 180 K. Sensors with wider nanogratings were more sensitive to changes in the local dielectric environment. Temperature-dependent experiments revealed an increase in plasmonic resonance intensity of around 13% at 180 K (compared with 300 K), while the coupled plasmonic-photonic resonance was less sensitive to temperature, varying by less than 5%. Simulation results confirm the relative temperature stability of the plasmonic-photonic mode and, combined with its high sensitivity, suggest a novel application of this mode as the sensing transduction mechanism over wide temperature ranges. To our knowledge, this is among the first reports of the design and characterization of a nanoplasmonic sensor specifically for low-temperature sensing operation.

Exploring surface sensitivity of Rayleigh anomaly in metal/dielectric multilayer gratings

Biosensors based on Rayleigh anomaly (RA) in metal gratings exhibit impressive bulk refractive index (RI) sensitivity and narrow linewidth. However, the electric field enhancement extends far away from surface of the gratings, which limits the application on biosensor where the RI changes are restricted at the sensor interface. To overcome this shortcoming, a novel grating composed of a 8-layer Au/Al₂O₃ stack was optimized by numerical simulation. The electric field is limited in several hundreds of nanometers from surface. The surface sensitivity increases 10 times than that of Au gratings at the detection depth of less than 400 nm. The surface index sensitivity can be improved 5 times under oblique incidence than that under normal incidence when the thickness of cover media is 20 nm.

Unravelling the Role of Electric and Magnetic Dipoles in Biosensing with Si Nanoresonators

High refractive index dielectric nanoresonators are attracting much attention due to their ability to control both electric and magnetic components of light. Due to the combination of confined modes with reduced absorption losses, they have recently been proposed as an alternative to nanoplasmonic biosensors. In this context, we study the use of semirandom silicon nanocylinder arrays, fabricated with simple and scalable colloidal lithography for the efficient and reliable detection of biomolecules in biological samples. Interestingly, electric and magnetic dipole resonances are associated with two different transduction mechanisms: extinction decrease and resonance red shift. By contrasting both observables, we identify clear advantages in tracking changes in the extinction magnitude. Our data demonstrate that, despite its simplicity, the proposed platform is able to detect prostate-specific antigen in human serum with limits of detection meeting clinical needs.

Tuning the magneto-optical Kerr effect by the nanograting cross section

The magneto-optical Kerr effect, especially the Kerr slope, is of great significance to magneto-optical devices. Herein, we developed a method to tune the magneto-optical effect by the nanograting cross section. Both the simulation and experiment confirm that the resonance strength of the plasmon can be modulated by the nanograting cross section, resulting in the large Kerr slope and Kerr rotation. By designing the nanograting cross section, we obtained the Kerr slope of 0.397°/nm, which is 4 orders of magnitude higher than the reported results. And the Kerr rotation of the magnetic nanograting reaches up to 1.218°, which is 24 times higher than the flat Co film. Such a huge enhancement on the Kerr slope and the Kerr rotation may have profound applications in magneto-optical devices in the future.

Tunable metasurface refractive index plasmonic nano-sensor utilizing an ITO thin layer in the near-infrared region

In this paper, a refractive index plasmonic nano-sensor with an array of metallic nano-rods has been designed in the near-infrared region. The tunable sensor is based on a perfect absorber, and an indium tin oxide (ITO) layer has been utilized as an active metasurface to improve sensor performance. By applying the voltage to the ITO layer, a perfect absorption has been obtained. Also, the sensitivity rises from 625 to 1125 nm/RIU (refractive index unit), and the figure of merit is 10 times higher. Moreover, the sensor application in the fields of medicine and hematology has been shown. The proposed sensor can be used to diagnose and determine anemia and malaria parasites.

Hydrogel-Based Plasmonic Sensor Substrate for the Detection of Ethanol

The in-line monitoring of ethanol concentration in liquids is a crucial part of process monitoring in breweries and distilleries. Current methods are based on infrared spectroscopy, which is time-consuming and costly, making these methods unaffordable for small and middle-sized companies. To overcome these problems, we presented a small, compact, and cost-effective sensing method for the ethanol content, based on a nanostructured, plasmonically active sensor substrate. The sensor substrate is coated with an ethanol-sensitive hydrogel, based on polyacrylamide and bisacrylamide, which induces a change in the refractive index of the substrate surface. The swelling and shrinking of such hydrogels offer a means to measure the ethanol content in liquids, which can be determined in a simple transmittance setup. In our study, we demonstrated the capability of the sensor principle for the detection of ethanol content ranging from 0 to 30 vol% ethanol. Furthermore, we determined the response time of the sensor substrate to be 5.2 min, which shows an improvement by a factor of four compared to other hydrogel-based sensing methods. Finally, initial results for the sensor's lifetime are presented.

Symmetry-breaking induced magnetic Fano resonances in densely packed arrays of symmetric nanotrimers

Due to unique properties and great design flexibilities, Fano resonances represent one of the most promising optical features mediated by metallic nanostructures, while the excitation of some Fano modes is impossible due to symmetry reasons. The aim of this work is to show that dense lattice arrangements can have a profound impact on the optical properties of nanostructures and, in particular, can enable the excitation of otherwise dark modes. Here, we demonstrate this concept using the example of rectangular arrays of symmetric trimers packed so densely that the coupling between neighbouring unit cells imposes a symmetry break, enabling the excitation of magnetic Fano resonances. We found that in experiments as well as in simulations, electric and magnetic Fano resonances can be simultaneously formed in cases where the inter-trimer distances are sufficiently small. By analysing the transition from an isolated trimer mode into a regime of strong near-field coupling, we show that by modifying the rectangular unit cell lengths due to the symmetry mismatch between lattice and trimer, two types of Fano resonances can be found, especially magnetic Fano resonances with loop-type magnetic field distributions within the centre of each trimer, which can be either enhanced or suppressed. In addition, the influence of the refractive index environment was measured, showing sensitivity values of approximately 300 nm/RIU. Our work provides fundamental insights into the interaction of the lattice and nanostructure response and paves the way towards the observation of novel optical excitations.

Improving LSPR sensing performance using multilayered composition graded Ag-Cu nanotriangle arrays

Patterned nanotriangle arrays with composition graded and multilayered Ag-Cu were fabricated by a co-deposition and nanosphere lithography process. With the increase of the number of layers or constructing a continuum graded layer, the index sensitivity of the resulting nanotriangles kept on increasing, indicating that the graded boundaries can improve plasmon resonance sensing.

Second Harmonic Spectroscopy of Surface Lattice Resonances

Because of their large figures of merit, surface lattice resonances (SLRs) in metal nanoparticle arrays are very promising for chemical and biomolecular sensing in both liquid and gas media. SLRs are sensitive to refractive index changes both near the surface of the nanoparticles (surface sensitivity) and in the volume between them (bulk sensitivity). Because of its intrinsic surface-sensitivity and a power law dependence on electric fields, second harmonic generation (SHG) spectroscopy can improve upon both the surface and volume sensitivities of SLRs. In this report on SHG spectroscopy of plasmonic nanoparticles, we show that the SHG signal is greatly increased (up to 450 times) by the SLRs. We also demonstrate very narrow resonances in SHG intensity (∼5 nm fwhm). We illustrate how the SHG resonances are highly sensitive to SLRs by varying the fundamental wavelength, angle of incidence, nanoparticle material, and lattice constant of the arrays. Finally, we identify an SHG resonance (10 nm fwhm) that is electric dipole forbidden and can be attributed to higher-order multipoles, enhanced by the strong near-fields of SLRs. Our results open up new and very promising avenues for chemical and biomolecular sensing based on SHG spectroscopy of SLRs.

Advances in nanoplasmonic biosensors for clinical applications

Plasmonic biosensors can be conveniently used as portable diagnostic devices for attaining timely and cost-effective clinical outcomes. Nanoplasmonics technology opens the way for sensor miniaturization, multiplexing and point of care testing.

Quantum plasmonic sensing using single photons

Reducing the noise below the shot-noise limit in sensing devices is one of the key promises of quantum technologies. Here, we study quantum plasmonic sensing based on an attenuated total reflection configuration with single photons as input. Our sensor is the Kretschmann configuration with a gold film, and a blood protein in an aqueous solution with different concentrations serves as an analyte. The estimation of the refractive index is performed using heralded single photons. We also determine the estimation error from a statistical analysis over a number of repetitions of identical and independent experiments. We show that the errors of our plasmonic sensor with single photons are below the shot-noise limit even in the presence of various experimental imperfections. Our results demonstrate a practical application of quantum plasmonic sensing is possible given certain improvements are made to the setup investigated, and pave the way for a future generation of quantum plasmonic applications based on similar techniques.

Antibody-Antigen Interaction Dynamics Revealed by Analysis of Single-Molecule Equilibrium Fluctuations on Individual Plasmonic Nanoparticle Biosensors

Antibody-antigen interactions are complex events central to immune response, in vivo and in vitro diagnostics, and development of therapeutic substances. We developed an ultrastable single-molecule localized surface plasmon resonance (LSPR) sensing platform optimized for studying antibody-antigen interaction kinetics over very long time scales. The setup allowed us to perform equilibrium fluctuations analysis of the PEG/anti-PEG interaction. By time and frequency domain analysis, we demonstrate that reversible adsorption of monovalently bound anti-PEG antibodies is the dominant factor affecting the LSPR fluctuations. The results suggest that equilibrium fluctuation analysis can be an alternative to established methods for determination of interaction rates. In particular, the methodology is suited to analyze molecular systems whose properties change during the initial interaction phases, for example, due to mass transport limitations or, as demonstrated here, because the effective association rate constant varies with surface concentration of adsorbed molecules.

Enhancing the figure of merit of refractive index sensors by magnetoplasmons in nanogratings

The sensing performance of one-dimensional magnetic nanograting based on magnetoplasmons was investigated. The predictable Kerr reversal and enhancement are achieved in our experiment. The further result shows that the shift of the Kerr null point has a linear relationship with the surrounding refractive index in a wide range. In addition, a huge figure of merit (FoM) of 1728/refractive index unit is achieved, which is 1 order of magnitude higher than the results reported. The experiment and theory confirm that the excitation of surface plasmons leads to the Kerr reversal and enhancement, resulting in a huge FoM.

Multilayered Nanoplasmonic Arrays for Self-Referenced Biosensing

Nanostructured sensors based on localized surface plasmon resonance (LSPR) offer a number of advantages over other optical sensing technologies, making them excellent candidates for miniaturized, label-free chemical and biological detection. Highly sensitive to local refractive index changes, the resonance peaks of the nanosensors shift by different amounts when subject to different biological and chemical environments. Modifications to the nanostructure surface allow for the detection of specific molecules and chemicals with shifts so sensitive that the presence of single molecules can be detected. However, this extreme sensitivity has its drawbacks. Resonance shifts also occur because of temperature shifts, light-intensity fluctuations, and other environmental factors. To distinguish detection from drift, a secondary sensor region is often required. This often doubles the size of the device, requires two light sources and detectors (or complex optics), doubles the sample volume required (which may be expensive, or may not be possible if the sample quantity is limited), and subjects the reference to potential biofouling. Here, we present a new proof-of-concept multilayered LSPR sensor design that incorporates both a sensing layer and an encapsulated reference layer within the same region. By doing so, we are able to monitor and correct for sensor drift without the need for a secondary reference channel. We demonstrate the suitability of this sensor for sucrose concentration measurements and for the detection of biotin-avidin interactions, while also showing that the sensor can self-correct for drift. We believe that this multilayer sensor design holds promise for point-of-care diagnostics.