Piezoelectric ribbons printed onto rubber for flexible energy conversion

Hybrid Integration of Wearable Devices for Physiological Monitoring

Wearable devices can provide timely, user-friendly, non- or minimally invasive, and continuous monitoring of human health. Recently, multidisciplinary scientific communities have made significant progress regarding fully integrated wearable devices such as sweat wearable sensors, saliva sensors, and wound sensors. However, the translation of these wearables into markets has been slow due to several reasons associated with the poor system-level performance of integrated wearables. The wearability consideration for wearable devices compromises many properties of the wearables. Besides, the limited power capacity of wearables hinders continuous monitoring for extended duration. Furthermore, peak-power operations for intensive computations can quickly create thermal issues in the compact form factor that interfere with wearability and sensor operations. Moreover, wearable devices are constantly subjected to environmental, mechanical, chemical, and electrical interferences and variables that can invalidate the collected data. This generates the need for sophisticated data analytics to contextually identify, include, and exclude data points per multisensor fusion to enable accurate data interpretation. This review synthesizes the challenges surrounding the wearable device integration from three aspects in terms of hardware, energy, and data, focuses on a discussion about hybrid integration of wearable devices, and seeks to provide comprehensive guidance for designing fully functional and stable wearable devices.

Alternatives to Fluoropolymers for Motion-Based Energy Harvesting: Perspectives on Piezoelectricity, Triboelectricity, Ferroelectrets, and Flexoelectricity

Fluoropolymers, including polytetrafluoroethylene (PTFE, Teflon), polyvinylidene difluoride (PVDF), and fluorine kautschuk materials (FKMs, Viton) are critical polymers for applications ranging from non-stick coatings, corrosion resistant seals, semiconductor manufacturing, membranes, and energy harvesting technologies. However, the synthesis of these fluoropolymers requires the use of per- and polyfluorinated alkyl substances (PFAS) known colloquially as "forever chemicals," and as such there is a pressing need to develop alternative technologies that can serve the end-use of fluoropolymers without the environmental cost of using PFAS. Further, fluoropolymers themselves fall under the PFAS umbrella. Here, alternative mechanical-to-electrical energy harvesting polymers are reviewed and benchmarked against the leading fluoropolymer energy harvesters. These alternative technologies include nonfluoropolymer piezoelectric polymers, triboelectric nanogenerators (TENGs), ferroelectric elastomers, and flexoelectric polymers. A vision towards sustainable, non-fluoropolymer-based energy harvesting is provided.

Flexible self-powered bioelectronics enables personalized health management from diagnosis to therapy

Flexible self-powered bioelectronics (FSPBs), incorporating flexible electronic features in biomedical applications, have revolutionized the human-machine interface since they hold the potential to offer natural and seamless human interactions while overcoming the limitations of battery-dependent power sources. Furthermore, as biosensors or actuators, FSPBs can dynamically monitor physiological signals to reveal real-time health abnormalities and provide timely and precise treatments. Therefore, FSPBs are increasingly shaping the landscape of health monitoring and disease treatment, weaving a sophisticated and personalized bond between humans and health management. Here, we examine the recent advanced progress of FSPBs in developing working mechanisms, design strategies, and structural configurations toward personalized health management, emphasizing its role in clinical medical scenarios from biophysical/biochemical sensors for sensing diagnosis to robust/biodegradable actuators for intervention therapy. Future perspectives on the challenges and opportunities in emerging multifunctional FSPBs for the next-generation health management systems are also forecasted.

An Emerging Era: Conformable Ultrasound Electronics

Conformable electronics are regarded as the next generation of personal healthcare monitoring and remote diagnosis devices. In recent years, piezoelectric-based conformable ultrasound electronics (cUSE) have been intensively studied due to their unique capabilities, including nonradiative monitoring, soft tissue imaging, deep signal decoding, wireless power transfer, portability, and compatibility. This review provides a comprehensive understanding of cUSE for use in biomedical and healthcare monitoring systems and a summary of their recent advancements. Following an introduction to the fundamentals of piezoelectrics and ultrasound transducers, the critical parameters for transducer design are discussed. Next, five types of cUSE with their advantages and limitations are highlighted, and the fabrication of cUSE using advanced technologies is discussed. In addition, the working function, acoustic performance, and accomplishments in various applications are thoroughly summarized. It is noted that application considerations must be given to the tradeoffs between material selection, manufacturing processes, acoustic performance, mechanical integrity, and the entire integrated system. Finally, current challenges and directions for the development of cUSE are highlighted, and research flow is provided as the roadmap for future research. In conclusion, these advances in the fields of piezoelectric materials, ultrasound transducers, and conformable electronics spark an emerging era of biomedicine and personal healthcare.

Piezoelectricity, Pyroelectricity, and Ferroelectricity in Biomaterials and Biomedical Applications

Piezoelectric, pyroelectric, and ferroelectric materials are considered unique biomedical materials due to their dielectric crystals and asymmetric centers that allow them to directly convert various primary forms of energy in the environment, such as sunlight, mechanical energy, and thermal energy, into secondary energy, such as electricity and chemical energy. These materials possess exceptional energy conversion ability and excellent catalytic properties, which have led to their widespread usage within biomedical fields. Numerous biomedical applications have demonstrated great potential with these materials, including disease treatment, biosensors, and tissue engineering. For example, piezoelectric materials are used to stimulate cell growth in bone regeneration, while pyroelectric materials are applied in skin cancer detection and imaging. Ferroelectric materials have even found use in neural implants that record and stimulate electrical activity in the brain. This paper reviews the relationship between ferroelectric, piezoelectric, and pyroelectric effects and the fundamental principles of different catalytic reactions. It also highlights the preparation methods of these three materials and the significant progress made in their biomedical applications. The review concludes by presenting key challenges and future prospects for efficient catalysts based on piezoelectric, pyroelectric, and ferroelectric nanomaterials for biomedical applications.

Advancements in the research of finger-actuated POCT chips

Microfluidic point-of-care testing (POCT) chips are used to enable the mixing and reaction of small sample volumes, facilitating target molecule detection. Traditional methods for actuating POCT chips rely on external pumps or power supplies, which are complex and non-portable. The development of finger-actuated chips has reduced operational difficulty and improved portability, promoting the development of POCT chips. This paper reviews the significance, developments, and potential applications of finger-actuated POCT chips. Three methods for controlling the flow accuracy of finger-actuated chips are summarized: direct push, indirect control, and sample injection control method, along with their respective advantages and disadvantages. Meanwhile, a comprehensive analysis of multi-fluid driving modes is provided, categorizing them into single-push multi-driving and multi-push multi-driving modes. Furthermore, recent research breakthroughs in finger-actuated chips are thoroughly summarized, and their structures, driving, and detection methods are discussed. Finally, this paper discusses the driving performance of finger-actuated chips, the suitability of detection scenarios, and the compatibility with existing detection technologies. It also provides prospects for the future development and application of finger-actuated POCT chips.

Piezoelectric nanogenerators for self-powered wearable and implantable bioelectronic devices

One of the recent innovations in the field of personalized healthcare is the piezoelectric nanogenerators (PENGs) for various clinical applications, including self-powered sensors, drug delivery, tissue regeneration etc. Such innovations are perceived to potentially address some of the unmet clinical needs, e.g., limited life-span of implantable biomedical devices (e.g., pacemaker) and replacement related complications. To this end, the generation of green energy from biomechanical sources for wearable and implantable bioelectronic devices gained considerable attention in the scientific community. In this perspective, this article provides a comprehensive state-of-the-art review on the recent developments in the processing, applications and associated concerns of piezoelectric materials (synthetic/biological) for personalized healthcare applications. In particular, this review briefly discusses the concepts of piezoelectric energy harvesting, piezoelectric materials (ceramics, polymers, nature-inspired), and the various applications of piezoelectric nanogenerators, such as, self-powered sensors, self-powered pacemakers, deep brain stimulators etc. Important distinction has been made in terms of the potential clinical applications of PENGs, either as wearable or implantable bioelectronic devices. While discussing the potential applications as implantable devices, the biocompatibility of the several hybrid devices using large animal models is summarized. This review closes with the futuristic vision of integrating data science approaches in developmental pipeline of PENGs as well as clinical translation of the next generation PENGs. STATEMENT OF SIGNIFICANCE: Piezoelectric nanogenerators (PENGs) hold great promise for transforming personalized healthcare through self-powered sensors, drug delivery systems, and tissue regeneration. The limited battery life of implantable devices like pacemakers presents a significant challenge, leading to complications from repititive surgeries. To address such a critical issue, researchers are focusing on generating green energy from biomechanical sources to power wearable and implantable bioelectronic devices. This comprehensive review critically examines the latest advancements in synthetic and nature-inspired piezoelectric materials for PENGs in personalized healthcare. Moreover, it discusses the potential of piezoelectric materials and data science approaches to enhance the efficiency and reliability of personalized healthcare devices for clinical applications.

Progress in wearable acoustical sensors for diagnostic applications

With extensive and widespread uses of miniaturized and intelligent wearable devices, continuously monitoring subtle spatial and temporal changes in human physiological states becomes crucial for daily healthcare and professional medical diagnosis. Wearable acoustical sensors and related monitoring systems can be comfortably applied onto human body with a distinctive function of non-invasive detection. This paper reviews recent advances in wearable acoustical sensors for medical applications. Structural designs and characteristics of the structural components of wearable electronics, including piezoelectric and capacitive micromachined ultrasonic transducer (i.e., pMUT and cMUT), surface acoustic wave sensors (SAW) and triboelectric nanogenerators (TENGs) are discussed, along with their fabrication techniques and manufacturing processes. Diagnostic applications of these wearable sensors for detection of biomarkers or bioreceptors and diagnostic imaging have further been discussed. Finally, main challenges and future research directions in these fields are highlighted.

Tuning Piezoelectricity via Thermal Annealing at a Freestanding Ferroelectric Membrane

Tuning the ferroelectric domain structure by a combination of elastic and electrostatic engineering provides an effective route for enhanced piezoelectricity. However, for epitaxial thin films, the clamping effect imposed by the substrate does not allow aftergrowth tuning and also limits the electromechanical response. In contrast, freestanding membranes, which are free of substrate constraints, enable the tuning of a subtle balance between elastic and electrostatic energies, giving new platforms for enhanced and tunable functionalities. Here, highly tunable piezoelectricity is demonstrated in freestanding PbTiO₃ membranes, by varying the ferroelectric domain structures from c-dominated to c/a and a domains via aftergrowth thermal treatment. Significantly, the piezoelectric coefficient of the c/a domain structure is enhanced by a factor of 2.5 compared with typical c domain PbTiO₃. This work presents a new strategy to manipulate the piezoelectricity in ferroelectric membranes, highlighting their great potential for nano actuators, transducers, sensors and other NEMS device applications.

Static and Dynamic Analysis of a Bistable Frequency Up-Converter Piezoelectric Energy Harvester

Using energy harvesting to convert ambient vibrations efficiently to electrical energy has become a worthy concept in recent years. Nevertheless, the low frequencies of the ambient vibrations cannot be effectively converted to power using traditional harvesters. Therefore, a frequency up-conversion harvester is presented to convert the low-frequency vibrations to high-frequency vibrations utilizing magnetic coupling. The presented harvester consists of a low-frequency beam (LFB) and a high-frequency beam (HFB) with identical tip magnets facing each other at the same polarity. The HFB, fully covered by a piezoelectric strip, is utilized for voltage generation. The dynamic behavior of the system and the corresponding generated voltage signal has been investigated by modeling the system as a two-degrees-of-freedom (2DOF) lumped-parameter model. A threshold distance of 15 mm that divides the system into a monostable regime with a weak magnetic coupling and a bistable regime with a strong magnetic coupling was revealed in the static analysis of the system. Hardening and softening behaviors were reported at the low frequency range for the mono and bistable regimes, respectively. In addition, a combined nonlinear hardening and softening behavior was captured for low frequencies at the threshold distance. Furthermore, a 100% increment was achieved in the generated voltage at the threshold compared to the monostable regime, and the maximum generated voltage was found to be in the bistable regime. The simulated results were validated experimentally. Moreover, the effect of the external resistance was investigated, and a 2 MΩ resistance was found to be optimal for maximizing the generated power. It was found that frequency up-converting based on magnetic nonlinearity can effectively scavenge energy from low-frequency external vibrations.

Overview: State-of-the-Art in the Energy Harvesting Based on Piezoelectric Devices for Last Decade

Technologies of energy harvesting have been developed intensively since the beginning of the twenty-first century, presenting themselves as alternatives to traditional energy sources (for instance, batteries) for small-dimensional and low-power electronics. Batteries have numerous shortcomings connected, for example, with restricted service life and the necessity of periodic recharging/replacement that create significant problems for portative and remote devices and for power equipment. Environmental energy covers solar, thermal, and oscillation energy. By this, the vibration energy exists continuously around us due to the operation of numerous artificial structures and mechanisms. Different materials (including piezoelectrics) and conversion mechanisms can transform oscillation energy into electrical energy for use in many devices of energy harvesting. Piezoelectric transducers possessing electric mechanical coupling and demonstrating a high density of power in comparison with electromagnetic and electrostatic sensors are broadly applied for the generation of energy from different oscillation energy sources. For the last decade, novel piezoelectric materials, transformation mechanisms, electrical circuits, and experimental and theoretical approaches with results of computer simulation have been developed for improving different piezoelectric devices of energy harvesting. This overview presents results, obtained in the area of piezoelectric energy harvesting for the last decade, including a wide spectrum of experimental, analytical, and computer simulation investigations.

Self-Assembled Epitaxial Ferroelectric Oxide Nanospring with Super-Scalability

Oxide nanosprings have attracted many research interests because of their anticorrosion, high-temperature tolerance, oxidation resistance, and enhanced-mechanic-response from unique helix structures, enabling various applications like nanomanipulators, nanomotors, nanoswitches, sensors, and energy harvesters. However, preparing oxide nanosprings is a challenge for their intrinsic lack of elasticity. Here, an approach for preparing self-assembled, epitaxial, ferroelectric nanosprings with built-in strain due to the lattice mismatch in freestanding La_0.7 Sr_0.3 MnO₃ /BaTiO₃ (LSMO/BTO) bilayer heterostructures is developed. It is found that these LSMO/BTO nanosprings can be extensively pulled or pushed up to their geometrical limits back and forth without breaking, exhibiting super-scalability with full recovery capability. The phase-field simulations reveal that the excellent scalability originates from the continuous ferroelastic domain structures, resulting from twisting under co-existing axial and shear strains. In addition, the oxide heterostructural springs exhibit strong resilience due to the limited plastic deformation nature and the built-in strain between the bilayers. This discovery provides an alternative way for preparing and operating functional oxide nanosprings that can be applied to various technologies.

PFM (piezoresponse force microscopy)-aided design for molecular ferroelectrics

With prosperity, decay, and another spring, molecular ferroelectrics have passed a hundred years since Valasek first discovered ferroelectricity in the molecular compound Rochelle salt. Recently, the proposal of ferroelectrochemistry has injected new vigor into this century-old research field. It should be highlighted that piezoresponse force microscopy (PFM) technique, as a non-destructive imaging and manipulation method for ferroelectric domains at the nanoscale, can significantly speed up the design rate of molecular ferroelectrics as well as enhance the ferroelectric and piezoelectric performances relying on domain engineering. Herein, we provide a brief review of the contribution of the PFM technique toward assisting the design and performance optimization of molecular ferroelectrics. Relying on the relationship between ferroelectric domains and crystallography, together with other physical characteristics such as domain switching and piezoelectricity, we believe that the PFM technique can be effectively applied to assist the design of high-performance molecular ferroelectrics equipped with multifunctionality, and thereby facilitate their practical utilization in optics, electronics, magnetics, thermotics, and mechanics among others.

Recent Progress of Flexible Image Sensors for Biomedical Applications

Flexible image sensors have attracted increasing attention as new imaging devices owing to their lightness, softness, and bendability. Since light can measure inside information from outside of the body, optical-imaging-based approaches, such as X-rays, are widely used for disease diagnosis in hospitals. Unlike conventional sensors, flexible image sensors are soft and can be directly attached to a curved surface, such as the skin, for continuous measurement of biometric information with high accuracy. Therefore, they are expected to gain wide application to wearable devices, as well as home medical care. Herein, the application of such sensors to the biomedical field is introduced. First, their individual components, photosensors, and switching elements, are explained. Then, the basic parameters used to evaluate the performance of each of these elements and the image sensors are described. Finally, examples of measuring the dynamic and static biometric information using flexible image sensors, together with relevant real-world measurement cases, are presented. Furthermore, recent applications of the flexible image sensors in the biomedical field are introduced.

Wearable and Implantable Electroceuticals for Therapeutic Electrostimulations

Wearable and implantable electroceuticals (WIEs) for therapeutic electrostimulation (ES) have become indispensable medical devices in modern healthcare. In addition to functionality, device miniaturization, conformability, biocompatibility, and/or biodegradability are the main engineering targets for the development and clinical translation of WIEs. Recent innovations are mainly focused on wearable/implantable power sources, advanced conformable electrodes, and efficient ES on targeted organs and tissues. Herein, nanogenerators as a hotspot wearable/implantable energy-harvesting technique suitable for powering WIEs are reviewed. Then, electrodes for comfortable attachment and efficient delivery of electrical signals to targeted tissue/organ are introduced and compared. A few promising application directions of ES are discussed, including heart stimulation, nerve modulation, skin regeneration, muscle activation, and assistance to other therapeutic modalities.

From Diagnosis to Treatment: Recent Advances in Patient-Friendly Biosensors and Implantable Devices

Patient-friendly medical diagnostics and treatments have been receiving a great deal of interest due to their rapid and cost-effective health care applications with minimized risk of infection, which has the potential to replace conventional hospital-based medical procedures. In particular, the integration of recently developed materials into health care devices allows the rapid development of point-of-care (POC) sensing platforms and implantable devices with special functionalities. In this review, the recent advances in biosensors for patient-friendly diagnosis and implantable devices for patient-friendly treatment are discussed. Comprehensive analysis of portable and wearable biosensing platforms for patient-friendly health monitoring and disease diagnosis is provided, including topics such as materials selection, device structure and integration, and biomarker detection strategies. Moreover, specific challenges related to each biological fluid for wearable biosensor-based POC applications are presented. Also, advances in implantable devices, including recent materials development and wireless communication strategies, are discussed. Furthermore, various patient-friendly surgical and treatment approaches are reviewed, such as minimally invasive insertion and mounting, in vivo electrical and optical modulations, and post-operation health monitoring. Finally, the challenges and future perspectives toward the development of the patient-friendly diagnosis and treatment are provided.

Energy Harvesting and Pd(II) Sorption Based on Organic-Inorganic Hybrid Perovskites

Organic-inorganic hybrid perovskites are currently an active research topic in the field of energy and next-generation electronics. Their selectable organic and inorganic components provide infinite possibilities for designing functional materials with multiple applications. Herein, we present a new one-dimensional BaNiO₃-like organic-inorganic hybrid perovskite (thiazolidinium)CdBr₃ (1), which displays a phase transition at 263 K and a switchable second harmonic generation (SHG) response. Intriguingly, 1 shows a pyroelectric coefficient p_e of ∼0.6 μC·cm^-2·K^-1 and a piezoelectric output voltage of ∼2.0 V for our fabricated piezoelectric generation device, indicating its great potential for pyroelectric sensors, self-powered low-voltage electronic devices, and energy harvesters. Moreover, the presence of a specific thioether donor enables 1 to appropriately adsorb Pd(II) ions, which can be monitored by the corresponding change in phase transition behavior, SHG signal, and pyroelectric response. This work provides a new insight to develop new multifunctional materials, demonstrating the feasibility of utilizing organic-inorganic hybrid perovskites to realize future self-powered low-voltage devices and energy harvesters.

A Fast Route Towards Freestanding Single-Crystalline Oxide Thin Films by Using YBa2Cu3O7-x as a Sacrificial Layer

Researchers have long been seeking multifunctional materials that can be adopted for next-generation nanoelectronics, and which, hopefully, are compatible with current semiconductor processing for further integration. Along this vein, complex oxides have gained numerous attention due to their versatile functionalities. Despite the fact that unbounded potential of complex oxides has been examined over the past years, one of the major challenges lies in the direct integration of these functional oxides onto existing devices or targeted substrates that are inherently incompatible in terms of oxide growth. To fulfill this goal, freestanding processes have been proposed, in which wet etching of inserted sacrificial layers is regarded as one of the most efficient ways to obtain epitaxial high-quality thin films. In this study, we propose using an alternative oxide, YBa₂Cu₃O₇ (YCBO), as a sacrificial layer, which can be easily dissolved in light hydrochloric acid in a more efficient way, while protecting selected complex oxides intact. The high epitaxial quality of the selected complex oxide before and after freestanding process using YBCO as a sacrificial layer is comprehensively studied via a combination of atomic force microscopy, X-ray diffraction, transmission electron microscopy, and electrical transports. This approach enables direct integration of complex oxides with arbitrary substrates and devices and is expected to offer a faster route towards the development of low-dimensional quantum materials.

Highly Integrated Elastic Island-Structured Printed Circuit Board with Controlled Young's Modulus for Stretchable Electronics

A stretchable printed circuit board (PCB), which is an essential component of next-generation electronic devices, should be highly stretchable even at high levels of integration, as well as durable under repetitive stretching and patternable. Herein, an island-structured stretchable PCB composed of materials with controlled Young's modulus and viscosity by adding a reinforcing agent or controlling the degree of crosslinking is reported. Each material was fabricated with the most effective structures through a 3D printer. The PCB was able to stretch 71.3% even when highly integrated and was patterned so that various components could be mounted. When fully integrated, the stress applied to the mounted components was reduced by 99.9% even when stretched by over 70%. Consequently, a 4 × 4 array of capacitance sensors in a stretchable keypad demonstration using our PCB was shown to work, even at 50% stretching of the PCB.

Super-elastic ferroelectric single-crystal membrane with continuous electric dipole rotation

Ferroelectrics are usually inflexible oxides that undergo brittle deformation. We synthesized freestanding single-crystalline ferroelectric barium titanate (BaTiO₃) membranes with a damage-free lifting-off process. Our BaTiO₃ membranes can undergo a ~180° folding during an in situ bending test, demonstrating a super-elasticity and ultraflexibility. We found that the origin of the super-elasticity was from the dynamic evolution of ferroelectric nanodomains. High stresses modulate the energy landscape markedly and allow the dipoles to rotate continuously between the a and c nanodomains. A continuous transition zone is formed to accommodate the variant strain and avoid high mismatch stress that usually causes fracture. The phenomenon should be possible in other ferroelectrics systems through domain engineering. The ultraflexible epitaxial ferroelectric membranes could enable many applications such as flexible sensors, memories, and electronic skins.

Hybrid nano-textured nanogenerator and self-powered sensor for on-skin triggered biomechanical motions

Researchers have made a lot of effort for the lightweight and high flexibility of wearable electronic devices, which also requires the associated energy harvesting equipment to have ultra-thin thickness and high stretchability. Therefore, a piezoelectric-triboelectric hybrid self-powered sensor (PTHS) has been proposed which can be used as the second layer of the human body. This elastic PTHS can even work on a person's fingers without disturbing the body's movements. The open circuit voltage and short circuit current of devices with a projected area of 30 mm × 25 mm can reach 1.2 V and 30 nA, respectively. Two piezoelectrically-triboelectrically sensors with machine learning optimized identification strategies were experimentally proven as the potential applications of the PTHS. The PTHS's ultra-thin thickness, high stretchability and superior geometry control features are promising in electronic skin, artificial muscle and soft robotics. The novelty of this work is that a smart mask integrated with PTHS can generate a signal of the hybrid sensor for the biomechanical motion classifier. After suitable training, an overall accuracy of 87.9% using long short-term memory can be achieved.

Unveiling Predominant Air-Stable Organotin Bromide Perovskite toward Mechanical Energy Harvesting

Organotin halide perovskites are developed as an appropriate substitute to replace highly toxic lead-based hybrid perovskites, which are a major concern for the environment as well as for human health. However, instability of the lead-free Sn-based perovskites under ambient conditions has hindered their wider utility in device applications. In this study, we report a predominantly stable lead-free methylammonium tin bromide (MASnBr₃) perovskite that has air stability over 120 days without passivation under ambient conditions. Further, the feasibility of this predominant air-stable MASnBr₃ perovskite for use in the harvesting of mechanical energy is described with the fabrication of an ecofriendly, flexible, and cost-effective piezoelectric generator (PEG) using MASnBr₃-polydimethylsiloxane composite films. The fabricated PEG exhibits high performance along with good mechanical durability and long-term stability. This flexible device reveals a high piezoelectric output voltage of ∼18.8 V, current density of ∼13.76 μA/cm², and power density of ∼74.52 μW/cm² under a periodic applied pressure of 0.5 MPa. Further, the ability of PEG to scavenge energy from various easily accessible biomechanical movements is demonstrated. The energy generated from PEG by finger tapping is stored in a capacitor and is used to power both a stopwatch and a commercial light-emitting diode. These findings offer a new insight to achieve long-term air-stable Sn-based hybrid perovskites, demonstrating the feasibility of using organotin halide perovskites to realize highly efficient, ecofriendly, mechanical energy harvesters with a wide range of utility that includes wearable and portable electronics as well as biomedical devices.

Active Actuating of a Simply Supported Beam with the Flexoelectric Effect

Piezoelectric materials with the electro-mechanical coupling effect have been widely utilized in sensors, dampers, actuators, and so on. Engineering structures with piezoelectric actuators and sensors have provided great improvement in terms of vibration and noise reduction. The flexoelectric effect-which describes the coupling effect between the polarization gradient and strain, and between the strain gradient and electric polarization in solids-has a fourth-rank order tensor electro-mechanical coupling coefficient, and in principle makes the flexoelectricity existing in all insulating materials and promises an even wider application potential in vibration and noise control. In the presented work, a flexoelectric actuator was designed to actuate a simply supported beam. The electric field gradient was generated by an atomic force microscopy probe. Flexoelectric control force and moment components could be induced within the flexoelectric control layer. As flexoelectricity is size-dependent, the key parameters that could affect the actuating effect were examined in case studies. Analytical results showed that the induced flexoelectric control moment was strongly concentrated at the probe location. The controllable transverse displacement of the simply supported beam was calculated with the modal expansion method. It was found that the controllable transverse displacement was dependent on the probe location as well.

Fiber-Based Energy Conversion Devices for Human-Body Energy Harvesting

Following the rapid development of lightweight and flexible smart electronic products, providing energy for these electronics has become a hot research topic. The human body produces considerable mechanical and thermal energy during daily activities, which could be used to power most wearable electronics. In this context, fiber-based energy conversion devices (FBECD) are proposed as candidates for effective conversion of human-body energy into electricity for powering wearable electronics. Herein, functional materials, fiber fabrication techniques, and device design strategies for different classes of FBECD based on piezoelectricity, triboelectricity, electrostaticity, and thermoelectricity are comprehensively reviewed. An overview of fiber-based self-powered systems and sensors according to their superior flexibility and cost-effectiveness is also presented. Finally, the challenges and opportunities in the field of fiber-based energy conversion are discussed.

In-plane anisotropic electronics based on low-symmetry 2D materials: progress and prospects

Low-symmetry layered materials such as black phosphorus (BP) have been revived recently due to their high intrinsic mobility and in-plane anisotropic properties, which can be used in anisotropic electronic and optoelectronic devices. Since the anisotropic properties have a close relationship with their anisotropic structural characters, especially for materials with low-symmetry, exploring new low-symmetry layered materials and investigating their anisotropic properties have inspired numerous research efforts. In this paper, we review the recent experimental progresses on low-symmetry layered materials and their corresponding anisotropic electrical transport, magneto-transport, optoelectronic, thermoelectric, ferroelectric, and piezoelectric properties. The boom of new low-symmetry layered materials with high anisotropy could open up considerable possibilities for next-generation anisotropic multifunctional electronic devices.

Stretchable Piezoelectric Power Generators Based on ZnO Thin Films on Elastic Substrates

The paper describes a stretchable, microfabricated power generator that will be attached on the skin and will produce energy based on the movements of the human body. The device was fabricated on a polymeric, elastomeric, poly(dimethylsiloxane) (PDMS) sheet. It consists of a piezoelectric thin film of ZnO sandwiched between two stretchable gold electrodes. An innovative technique was used for the deposition of ZnO thin film on the gold electrode-coated polymeric substrate at low temperatures below 150 °C. This is the first attempt to use a uniform film of ZnO, for energy harvesting. The ZnO film had the thickness at the submicron scale and the surface at the centimeter scale. We demonstrated that under a strain of 8% the voltage output from this power generator was equal to 2 V, the power output was equal to 160 μW and the corresponding power density was 1.27 mW/cm². This device has great potential for application in power sensors attached on the human body, such as temperature sensors or wearable electrocardiography systems.

Pure Piezoelectricity Generation by a Flexible Nanogenerator Based on Lead Zirconate Titanate Nanofibers

Lead zirconate titanate (PbZr_0.52Ti_0.48O₃, PZT) alloys have been extensively studied to be used for piezoelectric nanogenerators to harvest energy from mechanical motions. In this study, PZT nanofiber-based nanogenerators were fabricated to test their true piezoelectric performance without the triboelectric effect. Aligned PZT nanofibers were fabricated by a sol-gel electrospinning process. The thickness, area, and orientation of the PZT textile made by electrospinning a PZT solution onto multipair metal wires or metal mesh were controlled to form a composite textile. After the calcination, the PZT textile mixed with polydimethylsiloxane was placed between two flexible indium-doped tin oxide-polyethylene naphthalate substrates. The performance parameters of the nanogenerators were investigated under the bending motion, which excludes the triboelectric effect. An assembled nanogenerator of an area of 8 cm² and a thickness of 80 μm could generate an electrical output voltage of 1.1 V and a current of 1.4 μA under the bending strain. The piezoelectric voltage depended on the thickness of the PZT textile, whereas the piezoelectric current depended on both the thickness and the area of the PZT textile. The electrical performance of the device was significantly affected by the orientation of the PZT fiber and the bending direction. The output voltage and the output current were strain-dependent, whereas the total integrated charge was independent of the strain rate. The properties of the flexible nanogenerator could be quantified to verify the pure piezoelectric performance of the device.

Transfer Printing and its Applications in Flexible Electronic Devices

Flexible electronic systems have received increasing attention in the past few decades because of their wide-ranging applications that include the flexible display, eyelike digital camera, skin electronics, and intelligent surgical gloves, among many other health monitoring devices. As one of the most widely used technologies to integrate rigid functional devices with elastomeric substrates for the manufacturing of flexible electronic devices, transfer printing technology has been extensively studied. Though primarily relying on reversible interfacial adhesion, a variety of advanced transfer printing methods have been proposed and demonstrated. In this review, we first summarize the characteristics of a few representative methods of transfer printing. Next, we will introduce successful demonstrations of each method in flexible electronic devices. Moreover, the potential challenges and future development opportunities for transfer printing will then be briefly discussed.

Flexible piezoelectric ultrasonic energy harvester array for bio-implantable wireless generator

Ultrasonic driven wireless charging technology has recently attracted much attention in the next generation bio-implantable systems; however, most developed ultrasonic energy harvesters are bulky and rigid and cannot be applied to general complex surfaces. Here, a flexible piezoelectric ultrasonic energy harvester (PUEH) array was designed and fabricated by integrating a large number of piezoelectric active elements with multilayered flexible electrodes in an elastomer membrane. The developed flexible PUEH device can be driven by the ultrasonic wave to produce continuous voltage and current outputs on both planar and curved surfaces, reaching output signals of more than 2 Vpp and 4 μA, respectively. Potential applications of using the flexible PUEH to charge energy-storage devices and power commercial electronics were demonstrated. Its low attenuation performance was also evaluated using the in vitro test of transmitting power through pork tissue, demonstrating its potential use in the next generation of wirelessly powered bio-implantable micro-devices.

Flexoelectricity in Monolayer Transition Metal Dichalcogenides

Flexoelectricity, the coupling effect of the strain gradient and charge polarization, is an important route to tune electronic properties of low-dimensional materials. Here our extensive first-principles calculations reveal that structural wrinkling and corrugation will cause significant flexoelectricity in transition metal dichalcogenide (TMD) monolayers. The flexoelectricity is induced by the strain gradients created along the finite thickness of the wrinkled TMD monolayers and becomes more dominant in determining out-of-plane polarizations with decreasing wavelengths of the TMD wrinkles. According to the first-principles calculations and whole structural symmetry, a theoretical model is developed to describe the total out-of-plane polarizations and flexoelectric effect of the wrinkled TMD monolayers. The unveiled flexoelectricity in monolayer TMDs highlights a potential for their application in energy conversion devices.

Printed Nanocomposite Energy Harvesters with Controlled Alignment of Barium Titanate Nanowires

Piezoelectric nanocomposites are commonly used in the development of self-powered miniaturized electronic devices and sensors. Although the incorporation of one-dimensional (1D) piezoelectric nanomaterials (i.e., nanowires, nanorods, and nanofibers) in a polymer matrix has led to the development of devices with promising energy harvesting and sensing performance, they have not yet reached their ultimate performance due to the challenges in fabrication. Here, a direct-write additive manufacturing technique is utilized to facilitate the fabrication of spatially tailored piezoelectric nanocomposites. High aspect ratio barium titanate (BaTiO₃) nanowires (NWs) are dispersed in a polylactic acid (PLA) solution to produce a printable piezoelectric solution. The BaTiO₃ NWs are arranged in PLA along three different axes of alignment via shear-induced alignment during a controlled printing process. The result of electromechanical characterizations shows that the nanowire alignment significantly affects the energy harvesting performance of the nanocomposites. The optimal power output can be enhanced by as much as eight times for printed nanocomposites with a tailored architecture of the embedded nanostructures. This power generation capacity is 273% higher compared to conventional cast nanocomposites with randomly oriented NWs. The findings of this study suggest that 3D printing of nanowire-based nanocomposites is a feasible, scalable, and rapid methodology to produce high-performance piezoelectric transducers with tailored micro- and nanostructures. This study offers the first demonstration of nanocomposite energy harvesters with spatially controlled filler orientation realized directly from a digital design.

A Single Input Multiple Output (SIMO) Variation-Tolerant Nanosensor

Successful transition to commercialization and practical implementation of nanotechnology innovations may very well need device designs that are tolerant to the inherent variations and imperfections in all nanomaterials including carbon nanotubes, graphene, and others. As an example, a single-walled carbon nanotube network based gas sensor is promising for a wide range of applications such as environment, industry, and biomedical and wearable devices due to its high sensitivity, fast response, and low power consumption. However, a long-standing issue has been the production of extremely high purity semiconducting nanotubes, thereby contributing to the delay in the market adoption of those sensors. Inclusion of even less than 0.1% of metallic nanotubes, which is inevitable, is found to result in a significant deterioration of sensor-to-sensor uniformity. Acknowledging the coexistence of metallic and semiconducting nanotubes as well as all other possible imperfections, we herein present a novel variation-tolerant sensor design where the sensor response is defined by a statistical Gaussian measure in contrast to a traditional deterministic approach. The single input and multiple output data are attained using multiport electrodes fabricated over a relatively large area single nanotube ensemble. The data processing protocol discards outlier data points and the origin of the outliers is investigated. Both the experimental demonstration and complementary analytical modeling support the hypothesis that the statistical analysis of the device can strengthen the credibility of the sensor constructed using nanomaterials with any imperfections. The proposed strategy can also be applied to physical, radiation, and biosensors as well as other electronic devices.

Printing two-dimensional gallium phosphate out of liquid metal

Two-dimensional piezotronics will benefit from the emergence of new crystals featuring high piezoelectric coefficients. Gallium phosphate (GaPO₄) is an archetypal piezoelectric material, which does not naturally crystallise in a stratified structure and hence cannot be exfoliated using conventional methods. Here, we report a low-temperature liquid metal-based two-dimensional printing and synthesis strategy to achieve this goal. We exfoliate and surface print the interfacial oxide layer of liquid gallium, followed by a vapour phase reaction. The method offers access to large-area, wide bandgap two-dimensional (2D) GaPO₄ nanosheets of unit cell thickness, while featuring lateral dimensions reaching centimetres. The unit cell thick nanosheets present a large effective out-of-plane piezoelectric coefficient of 7.5 ± 0.8 pm V^-1. The developed printing process is also suitable for the synthesis of free standing GaPO₄ nanosheets. The low temperature synthesis method is compatible with a variety of electronic device fabrication procedures, providing a route for the development of future 2D piezoelectric materials.

Flexible Strain Sensors Fabricated by Meniscus-Guided Printing of Carbon Nanotube-Polymer Composites

Printed strain sensors have promising potential as a human-machine interface (HMI) for health-monitoring systems, human-friendly wearable interactive systems, and smart robotics. Herein, flexible strain sensors based on carbon nanotube (CNT)-polymer composites were fabricated by meniscus-guided printing using a CNT ink formulated from multiwall nanotubes (MWNTs) and polyvinylpyrrolidone (PVP); the ink was suitable for micropatterning on nonflat (or curved) substrates and even three-dimensional structures. The printed strain sensors exhibit a reproducible response to applied tensile and compressive strains, having gauge factors of 13.07 under tensile strain and 12.87 under compressive strain; they also exhibit high stability during ∼1500 bending cycles. Applied strains induce a contact rearrangement of the MWNTs and a change in the tunneling distance between them, resulting in a change in the resistance (Δ R/ R₀) of the sensor. Printed MWNT-PVP sensors were used in gloves for finger movement detection; these can be applied to human motion detection and remote control of robotic equipment. Our results demonstrate that meniscus-guided printing using CNT inks can produce highly flexible, sensitive, and inexpensive HMI devices.

Stretchable ultrasonic transducer arrays for three-dimensional imaging on complex surfaces

Ultrasonic imaging has been implemented as a powerful tool for noninvasive subsurface inspections of both structural and biological media. Current ultrasound probes are rigid and bulky and cannot readily image through nonplanar three-dimensional (3D) surfaces. However, imaging through these complicated surfaces is vital because stress concentrations at geometrical discontinuities render these surfaces highly prone to defects. This study reports a stretchable ultrasound probe that can conform to and detect nonplanar complex surfaces. The probe consists of a 10 × 10 array of piezoelectric transducers that exploit an "island-bridge" layout with multilayer electrodes, encapsulated by thin and compliant silicone elastomers. The stretchable probe shows excellent electromechanical coupling, minimal cross-talk, and more than 50% stretchability. Its performance is demonstrated by reconstructing defects in 3D space with high spatial resolution through flat, concave, and convex surfaces. The results hold great implications for applications of ultrasound that require imaging through complex surfaces.

Properties and Applications of the β Phase Poly(vinylidene fluoride)

Poly(vinylidene fluoride), PVDF, as one of important polymeric materials with extensively scientific interests and technological applications, shows five crystalline polymorphs with α, β, γ, δ and ε phases obtained by different processing methods. Among them, β phase PVDF presents outstanding electrical characteristics including piezo-, pyro-and ferroelectric properties. These electroactive properties are increasingly important in applications such as energy storage, spin valve devices, biomedicine, sensors and smart scaffolds. This article discusses the basic knowledge and character methods for PVDF fabrication and provides an overview of recent advances on the phase modification and recent applications of the β phase PVDF are reported. This study may provide an insight for the development and utilization for β phase PVDF nanofilms in future electronics.

Fully inkjet-printed two-dimensional material field-effect heterojunctions for wearable and textile electronics

Fully printed wearable electronics based on two-dimensional (2D) material heterojunction structures also known as heterostructures, such as field-effect transistors, require robust and reproducible printed multi-layer stacks consisting of active channel, dielectric and conductive contact layers. Solution processing of graphite and other layered materials provides low-cost inks enabling printed electronic devices, for example by inkjet printing. However, the limited quality of the 2D-material inks, the complexity of the layered arrangement, and the lack of a dielectric 2D-material ink able to operate at room temperature, under strain and after several washing cycles has impeded the fabrication of electronic devices on textile with fully printed 2D heterostructures. Here we demonstrate fully inkjet-printed 2D-material active heterostructures with graphene and hexagonal-boron nitride (h-BN) inks, and use them to fabricate all inkjet-printed flexible and washable field-effect transistors on textile, reaching a field-effect mobility of ~91 cm2 V-1 s-1, at low voltage (<5 V). This enables fully inkjet-printed electronic circuits, such as reprogrammable volatile memory cells, complementary inverters and OR logic gates.

Analytical, numerical, and experimental studies of viscoelastic effects on the performance of soft piezoelectric nanocomposites

Piezoelectric composite (p-NC) made of a polymeric matrix and piezoelectric nanoparticles with conductive additives is an attractive material for many applications. As the matrix of p-NC is made of viscoelastic materials, both elastic and viscous characteristics of the matrix are expected to contribute to the piezoelectric response of p-NC. However, there is limited understanding of how viscoelasticity influences the piezoelectric performance of p-NC. Here we combined analytical and numerical analyses with experimental studies to investigate effects of viscoelasticity on piezoelectric performance of p-NC. The viscoelastic properties of synthesized p-NCs were controlled by changing the ratio between monomer and cross-linker of the polymer matrix. We found good agreement between our analytical models and experimental results for both quasi-static and dynamic loadings. It is found that, under quasi-static loading conditions, the piezoelectric coefficients (d₃₃) of the specimen with the lowest Young's modulus (∼0.45 MPa at 5% strain) were ∼120 pC N^-1, while the one with the highest Young's modulus (∼1.3 MPa at 5% strain) were ∼62 pC N^-1. The results suggest that softer matrices enhance the energy harvesting performance because they can result in larger deformation for a given load. Moreover, from our theoretical analysis and experiments under dynamic loading conditions, we found the viscous modulus of a matrix is also important for piezoelectric performance. For instance, at 40 Hz and 50 Hz the storage moduli of the softest specimen were ∼0.625 MPa and ∼0.485 MPa, while the loss moduli were ∼0.108 MPa and ∼0.151 MPa, respectively. As piezocomposites with less viscous loss can transfer mechanical energy to piezoelectric particles more efficiently, the dynamic piezoelectric coefficient (d'₃₃) measured at 40 Hz (∼53 pC N^-1) was larger than that at 50 Hz (∼47 pC N^-1) though it has a larger storage modulus. As an application of our findings, we fabricated 3D piezo-shells with different viscoelastic properties and compared the charging time. The results showed a good agreement with the predicted trend that the composition with the smallest elastic and viscous moduli showed the fastest charging rate. Our findings can open new opportunities for optimizing the performance of polymer-based multifunctional materials by harnessing viscoelasticity.

Three-dimensional Printing of Silver Microarchitectures Using Newtonian Nanoparticle Inks

Although three-dimensional (3D) printing has recently emerged as a technology to potentially bring about the next industrial revolution, the limited selection of usable materials restricts its use to simple prototyping. In particular, metallic 3D printing with submicrometer spatial resolution is essential for the realization of 3D-printed electronics. Herein, a meniscus-guided 3D printing method that exploits a low-viscosity (∼7 mPa·s) silver nanoparticle (AgNP) ink meniscus with Newtonian fluid characteristics (which is compatible with conventional inkjet printers) to fabricate 3D silver microarchitectures is reported. Poly(acrylic acid)-capped AgNP ink that exhibits a continuous ink flow through a confined nozzle without aggregation is designed in this study. Guiding the ink meniscus with controlled direction and speed enables both vertical pulling and layer-by-layer processing, resulting in the creation of 3D microobjects with designed shapes other than those for simple wiring. Various highly conductive (>10⁴ S·cm^-1) 3D metallic patterns are demonstrated for applications in electronic devices. This research is expected to widen the range of materials that can be employed in 3D printing technology, with the aim of moving 3D printing beyond prototyping and into real manufacturing platforms for future electronics.

Metallic Glass/PVDF Magnetoelectric Laminates for Resonant Sensors and Actuators: A Review

Among magnetoelectric (ME) heterostructures, ME laminates of the type Metglas-like/PVDF (magnetostrictive+piezoelectric constituents) have shown the highest induced ME voltages, usually detected at the magnetoelastic resonance of the magnetostrictive constituent. This ME coupling happens because of the high cross-correlation coupling between magnetostrictive and piezoelectric material, and is usually associated with a promising application scenario for sensors or actuators. In this work we detail the basis of the operation of such devices, as well as some arising questions (as size effects) concerning their best performance. Also, some examples of their use as very sensitive magnetic fields sensors or innovative energy harvesting devices will be reviewed. At the end, the challenges, future perspectives and technical difficulties that will determine the success of ME composites for sensor applications are discussed.

Research Update: Materials design of implantable nanogenerators for biomechanical energy harvesting

Implantable nanogenerators are rapidly advanced recently as a promising concept for harvesting biomechanical energy in vivo. This review article presents an overview of the most current progress of implantable piezoelectric nanogenerator (PENG) and triboelectric nanogenerator (TENG) with a focus on materials selection, engineering, and assembly. The evolution of the PENG materials is discussed from ZnO nanostructures, to high-performance ferroelectric perovskites, to flexible piezoelectric polymer mesostructures. Discussion of TENGs is focused on the materials and surface features of friction layers, encapsulation materials, and device integrations. Challenges faced by this promising technology and possible future research directions are also discussed.

Versatile Transfer of an Ultralong and Seamless Nanowire Array Crystallized at High Temperature for Use in High-Performance Flexible Devices

Nanowire (NW) transfer technology has provided promising strategies to realize future flexible materials and electronics. Using this technology, geometrically controlled, high-quality NW arrays can now be obtained easily on various flexible substrates with high throughput. However, it is still challenging to extend this technology to a wide range of high-performance device applications because its limited temperature tolerance precludes the use of high-temperature annealing, which is essential for NW crystallization and functionalization. A pulsed laser technique has been developed to anneal NWs in the presence of a flexible substrate; however, the induced temperature is not high enough to improve the properties of materials such as ceramics and semiconductors. Here, we present a versatile nanotransfer method that is applicable to NWs that require high-temperature annealing. To successfully anneal NWs during their transfer, the developed fabrication method involves sequential removal of a nanoscale sacrificial layer. Using this method, we first produce an ultralong, perfectly aligned polycrystalline barium titanate (BaTiO₃) NW array that is heat treated at 700 °C on a flexible polyethylene terephthalate (PET) substrate. This high-quality piezoelectric NW array on a flexible substrate is used as a flexible nanogenerator that generates current and voltage 37 and 10 times higher, respectively, than those of a nanogenerator made of noncrystallized BaTiO₃ NWs.

Modified Continuum Mechanics Modeling on Size-Dependent Properties of Piezoelectric Nanomaterials: A Review

Piezoelectric nanomaterials (PNs) are attractive for applications including sensing, actuating, energy harvesting, among others in nano-electro-mechanical-systems (NEMS) because of their excellent electromechanical coupling, mechanical and physical properties. However, the properties of PNs do not coincide with their bulk counterparts and depend on the particular size. A large amount of efforts have been devoted to studying the size-dependent properties of PNs by using experimental characterization, atomistic simulation and continuum mechanics modeling with the consideration of the scale features of the nanomaterials. This paper reviews the recent progresses and achievements in the research on the continuum mechanics modeling of the size-dependent mechanical and physical properties of PNs. We start from the fundamentals of the modified continuum mechanics models for PNs, including the theories of surface piezoelectricity, flexoelectricity and non-local piezoelectricity, with the introduction of the modified piezoelectric beam and plate models particularly for nanostructured piezoelectric materials with certain configurations. Then, we give a review on the investigation of the size-dependent properties of PNs by using the modified continuum mechanics models, such as the electromechanical coupling, bending, vibration, buckling, wave propagation and dynamic characteristics. Finally, analytical modeling and analysis of nanoscale actuators and energy harvesters based on piezoelectric nanostructures are presented.