Functional cationic nanomagnet-porphyrin hybrids for the photoinactivation of microorganisms

Impact of Fe3O4-porphyrin hybrid nanoparticles on wheat: Physiological and metabolic advance

Iron-magnetic nanoparticles (Fe-NMPs) are widely used in environmental remediation, while porphyrin-based hybrid materials anchored to silica-coated Fe3O4-nanoparticles (Fe3O4-NPs) have been used for water disinfection purposes. To assess their safety on plants, especially concerning potential environmental release, it was investigated for the first time, the impact on plants of a silica-coated Fe3O4-NPs bearing a porphyrinic formulation (FORM) - FORM@NMP. Additionally, FORM alone and the magnetic nanoparticles without FORM anchored (NH2@NMP) were used for comparison. Wheat (Triticum aestivum L.) was chosen as a model species and was subjected to three environmentally relevant doses during germination and tiller development through root application. Morphological, physiological, and metabolic parameters were assessed. Despite a modest biomass decrease and alterations in membrane properties, no major impairments in germination or seedling development were observed. During tiller phase, both Fe3O4-NPs increased leaf length, and photosynthesis exhibited varied impacts: both Fe3O4-NPs and FORM alone increased pigments; only Fe3O4-NPs promoted gas exchange; all treatments improved the photochemical phase. Regarding oxidative stress, lipid peroxidation decreased in FORM and FORM@NMP, yet with increased O2-• in FORM@NMP; total flavonoids decreased in NH2@NMP and antioxidant enzymes declined across all materials. Phenolic profiling revealed a generalized trend towards a decrease in flavones. In conclusion, these nanoparticles can modulate wheat physiology/metabolism without apparently inducing phytotoxicity at low doses and during short-time exposure. ENVIRONMENTAL IMPLICATION: Iron-magnetic nanoparticles are widely used in environmental remediation and fertilization, besides of new applications continuously being developed, making them emerging contaminants. Soil is a major sink for these nanoparticles and their fate and potential environmental risks in ecosystems must be addressed to achieve more sustainable environmental applications. Furthermore, as the reuse of treated wastewater for agricultural irrigation is being claimed, it is of major importance to disclose the impact on crops of the nanoparticles used for wastewater decontamination, such as those proposed in this work.

Efficient Strategies to Use β-Cationic Porphyrin-Imidazolium Derivatives in the Photoinactivation of Methicillin-Resistant Staphylococcus aureus

Bacterial resistance to antibiotics is a critical global health issue and the development of alternatives to conventional antibiotics is of the upmost relevance. Antimicrobial photodynamic therapy (aPDT) is considered a promising and innovative approach for the photoinactivation of microorganisms, particularly in cases where traditional antibiotics may be less effective due to resistance or other limitations. In this study, two β-modified monocharged porphyrin-imidazolium derivatives were efficiently incorporated into polyvinylpyrrolidone (PVP) formulations and supported into graphitic carbon nitride materials. Both porphyrin-imidazolium derivatives displayed remarkable photostability and the ability to generate cytotoxic singlet oxygen. These properties, which have an important impact on achieving an efficient photodynamic effect, were not compromised after incorporation/immobilization. The prepared PVP-porphyrin formulations and the graphitic carbon nitride-based materials displayed excellent performance as photosensitizers to photoinactivate methicillin-resistant Staphylococcus aureus (MRSA) (99.9999% of bacteria) throughout the antimicrobial photodynamic therapy. In each matrix, the most rapid action against S. aureus was observed when using PS 2. The PVP-2 formulation needed 10 min of exposure to white light at 5.0 µm, while the graphitic carbon nitride hybrid GCNM-2 required 20 min at 25.0 µm to achieve a similar level of response. These findings suggest the potential of graphitic carbon nitride-porphyrinic hybrids to be used in the environmental or clinical fields, avoiding the use of organic solvents, and might allow for their recovery after treatment, improving their applicability for bacteria photoinactivation.

Increasing the Selectivity of Light-Active Antimicrobial Agents - Or How To Get a Photosensitizer to the Desired Target

Photosensitizers combine the inherent reactivity of reactive oxygen species with the sophisticated reaction control of light. Through selective targeting, these light-active molecules have the potential to overcome certain limitations in drug discovery. Ongoing advances in the synthesis and evaluation of photosensitizer conjugates with biomolecules such as antibodies, peptides, or small-molecule drugs are leading to increasingly powerful agents for the eradication of a growing number of microbial species. This review article, therefore, summarizes challenges and opportunities in the development of selective photosensitizers and their conjugates described in recent literature. This provides adequate insight for newcomers and those interested in this field.

Starch-based films doped with porphyrinoid photosensitizers for active skin wound healing

Starch is a biodegradable and biocompatible carbohydrate that, when combined with bioactive molecules, can be processed as biomimetic platforms with enhanced performance, allowing its use as active wound dressing materials. Porphyrinoid photosensitizers can tune the physicochemical/functional profile of biomacromolecules, allowing their use in anti-infective strategies. In this work, the feasibility of using the cationic 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetraiodide (TMPyP) to enhance the physicochemical, mechanical, antimicrobial performance, and wound healing ability of casted starch-based films was studied. TMPyP conferred a reddish coloration to the films, maintaining their pristine transparency. It increased by 87 % the films hydrophobicity and, depending on the TMPyP used, conferred mobility to the starch polymeric chains. Starch/TMPyP-based films effectively photoinactivated Escherichia coli (>99.99 %) and favored the wound healing process, even in the absence of light. Therefore, the incorporation of TMPyP into starch-based formulations revealed to be a promising strategy to tune the films compaction degree while giving rise to water tolerant and photosensitive biomaterials that can act as multitarget antimicrobial medical dressings and glycocarriers of active compounds relevant for effective skin wound healing.

Photodynamic inactivation of microorganisms in different water matrices: The effect of physicochemical parameters on the treatment outcome

Wastewater (WW) insufficiently treated for the disinfection of microorganisms, including pathogenic ones, is a source of concern and a possible generator of public health problems. Traditional disinfection methods to reduce pathogens concentration (e.g., chlorination, ozonation, UV) are expensive, unsafe, and/or sometimes ineffective, highlighting the need for new disinfection technologies. The promising results of photodynamic inactivation (PDI) treatment to eradicate microorganisms suggest the efficacy of this treatment to improve WW quality. This work aimed to assess if PDI can be successfully extended to real contexts for the microbial inactivation in WW. For the first time, PDI experiments with 9 different water matrices compositions were performed to inquire about the influence of some of their physicochemical parameters on the effectiveness of microbial inactivation. Bacterial photoinactivation was tested in freshwater, aquaculture water, and seawater samples, as well as in influents and effluents samples from domestic, industrial, and a mixture of industrial and domestic WW receiving wastewater treatment plants (WWTPs). Additionally, PDI assays were performed in phosphate-buffered saline isotonic solution (PBS), used as an aqueous comparative matrix. To relate the PDI disinfection efficiency with the physicochemical compositions of the different used water matrices, a series of statistical analysis were performed, in order to support our main conclusions. Overall, the results showed that PDI is an effective and promising alternative to traditionally used WW disinfection methods, with a bacterial reduction of >3.0 log CFU/mL in all the water matrices within the first hour of PDI treatment, but also that the physicochemical composition of the aqueous matrices to be PDI-disinfected must be taken into account since they seem to influence the PDI efficacy, namely the pH, with acidic pH conditions seeming to be associated to a better PDI performance in general.

Porphyrins developed for photoinactivation of microbes in wastewater

Photodynamic antimicrobial chemotherapy (PACT) is extensively studied as a strategic method to inactivate pathogenic microbes in wastewater for addressing the limitations associated with chlorination, ozonation, and ultraviolet irradiation as disinfection methods, which generally promote the development of resistant genes and harmful by-products such as trihalomethanes. PACT is dependent on photons, oxygen, and a photosensitizer to induce cytotoxic effects on various microbes by generating reactive oxygen species. Photosensitizers such as porphyrins have demonstrated significant microbial inactivation through PACT, hence now explored for wastewater phototreatment. This review aims to evaluate the efficacy of porphyrins and porphyrin-conjugates as photosensitizers for wastewater photoinactivation. Concerns relating to the application of photosensitizers in water treatment are also evaluated. This includes recovery and reuse of the photosensitizer when immobilized on solid supports.

Antimicrobial efficacy of in vitro and ex vivo photodynamic therapy using porphyrins against Moraxella spp. isolated from bovine keratoconjunctivitis

Infectious bovine keratoconjunctivitis (IBK) is an ocular disease affecting bovine herds worldwide, and it causes significant economic loss. The etiologic agent of IBK is considered to be Moraxella bovis, but M. ovis and M. bovoculi are frequently recovered of animals presenting clinical signs of IBK. The therapeutic measures available for its control have limited efficacy. Antimicrobial photodynamic therapy (aPDT) using porphyrins as photosensitizing molecules is an alternative method that can be used to reduce microbial growth. We evaluated the antibacterial activity of aPDT using two water-soluble tetra-cationic porphyrins (H₂TMeP and ZnTMeP) against 22 clinical isolates and standard strains of Moraxella spp. in vitro and in an ex vivo model. For the in vitro assay, 4.0 µM of porphyrin was incubated with approximately 1.0 × 10⁴ CFU/mL of each Moraxella sp. isolate and exposed to artificial light for 0, 2.5, 5, and 7.5 min. Next, 50 µL of this solution was plated and incubated for 24 h until CFU measurement. For the ex vivo assay, corneas excised from the eyeballs of slaughtered cattle were irrigated with Moraxella spp. culture, followed by the addition of zinc(II) porphyrin ZnTMeP (4.0 μM). The corneal samples were irradiated for 0, 7.5, and 30 min, followed by swab collection, plating, and CFU count. The results demonstrated the in vitro inactivation of the strains and clinical isolates of Moraxella spp. after 2.5 min of irradiation using ZnTMeP, reaching complete inactivation until 7.5 min. In the ex vivo experiment, the use of ZnTMeP resulted in the most significant reduction in bacterial concentration after 30 min of irradiation. These results encourage future in vivo experiments to investigate the role of metalloporphyrin ZnTMeP in the inactivation of Moraxella spp. isolates causing IBK.

Stimuli-Responsive Antibacterial Materials: Molecular Structures, Design Principles, and Biomedical Applications

Infections are regarded as the most severe complication associated with human health, which are urgent to be solved. Stimuli-responsive materials are appealing therapeutic platforms for antibacterial treatments, which provide great potential for accurate theranostics. In this review, the advantages, the response mechanisms, and the key design principles of stimuli-responsive antibacterial materials are highlighted. The biomedical applications, the current challenges, and future directions of stimuli-responsive antibacterial materials are also discussed. First, the categories of stimuli-responsive antibacterial materials are comprehensively itemized based on different sources of stimuli, including external physical environmental stimuli (e.g., temperature, light, electricity, salt, etc.) and bacterial metabolites stimuli (e.g., acid, enzyme, redox, etc.). Second, structural characteristics, design principles, and biomedical applications of the responsive materials are discussed, and the underlying interrelationships are revealed. The molecular structures and design principles are closely related to the sources of stimuli. Finally, the challenging issues of stimuli-responsive materials are proposed. This review will provide scientific guidance to promote the clinical applications of stimuli-responsive antibacterial materials.

Photoinactivation of Phage Phi6 as a SARS-CoV-2 Model in Wastewater: Evidence of Efficacy and Safety

The last two years have been marked by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. This virus is found in the intestinal tract; it reaches wastewater systems and, consequently, the natural receiving water bodies. As such, inefficiently treated wastewater (WW) can be a means of contamination. The currently used methods for the disinfection of WW can lead to the formation of toxic compounds and can be expensive or inefficient. As such, new and alternative approaches must be considered, namely, photodynamic inactivation (PDI). In this work, the bacteriophage φ6 (or, simply, phage φ6), which has been used as a suitable model for enveloped RNA viruses, such as coronaviruses (CoVs), was used as a model of SARS-CoV-2. Firstly, to understand the virus’s survival in the environment, phage φ6 was subjected to different laboratory-controlled environmental conditions (temperature, pH, salinity, and solar and UV-B irradiation), and its persistence over time was assessed. Second, to assess the efficiency of PDI towards the virus, assays were performed in both phosphate-buffered saline (PBS), a commonly used aqueous matrix, and a secondarily treated WW (a real WW matrix). Third, as WW is generally discharged into the marine environment after treatment, the safety of PDI-treated WW was assessed through the determination of the viability of native marine water microorganisms after their contact with the PDI-treated effluent. Overall, the results showed that, when used as a surrogate for SARS-CoV-2, phage φ6 remains viable in different environmental conditions for a considerable period. Moreover, PDI proved to be an efficient approach in the inactivation of the viruses, and the PDI-treated effluent showed no toxicity to native aquatic microorganisms under realistic dilution conditions, thus endorsing PDI as an efficient and safe tertiary WW disinfection method. Although all studies were performed with phage φ6, which is considered a suitable model of SARS-CoV-2, further studies using SARS-CoV-2 are necessary; nevertheless, the findings show the potential of PDI for controlling SARS-CoV-2 in WW.

Bioluminescent Models to Evaluate the Efficiency of Light-Based Antibacterial Approaches

The emergence of microbial resistance to antimicrobials among several common pathogenic microbial strains is an increasing problem worldwide. Thus, it is urgent to develop not only new antimicrobial therapeutics to fight microbial infections, but also new effective, rapid, and inexpensive methods to monitor the efficacy of these new therapeutics. Antimicrobial photodynamic therapy (aPDT) and antimicrobial blue light (aBL) therapy are receiving considerable attention for their antimicrobial potential and represent realistic alternatives to antibiotics. To monitor the photoinactivation process provided by aPDT and aBL, faster and more effective methods are required instead of laborious conventional plating and overnight incubation procedures. Bioluminescent microbial models are very interesting in this context. Light emission from bioluminescent microorganisms is a highly sensitive indication of their metabolic activity and can be used to monitor, in real time, the effects of antimicrobial agents and therapeutics. This chapter reviews the efforts of the scientific community concerning the development of in vitro, ex vivo, and in vivo bioluminescent bacterial models and their potential to evaluate the efficiency of aPDT and aBL in the inactivation of bacteria.

Spherical and rod shaped mesoporous nanosilicas for cancer-targeted and photosensitizers delivery in photodynamic therapy

Mesoporous silica nanoparticles (MSNPs) have attracted much attention in many biomedical applications. One of the fields in which smart functional nanosystems have found wide application is in cancer treatment. Here,...

Chalcogenide nanoparticles and organic photosensitizers for synergetic antimicrobial photodynamic therapy

Synergistic antimicrobial effects were observed for copper sulfide (CuS) nanoparticles together with indocyanine green (ICG) in the elimination of wild type pathogenic bacteria (Staphylococcus aureus ATCC 29213 and Pseudomonas aeruginosa ATCC 27853) and also opportunistic fungal infective yeast (Candida albicans ATCC 10231). Furthermore, large antibacterial effects were observed for clinical isolates of Methicillin-resistant S. aureus (MRSA) PFGE strain-type USA300. This efficient antimicrobial action was attributed to the combined extra- and intracellular generation of reactive oxygen species upon light irradiation. Instead of the use of visible-light for the activation of common photosensitizers, both ICG and CuS nanoparticles can be activated in the near infrared (NIR)-region of the electromagnetic spectrum and therefore, superior tissue penetration would be expected in a potential elimination of pathogenic microorganisms not only on the skin but also in the soft tissue. In the different bacteria studied a 3-log reduction in the bacterial counts was achieved after only 6 min of NIR irradiation and treatment with ICG or CuS alone at concentrations of 40 and 160 µg mL^-1, respectively. A maximum bactericidal effect against S. aureus and USA300 strains was obtained for the combination of both photosensitizers at the same concentration. Regarding P. aeruginosa, a 4-log reduction in the CFU was observed for the combination of CuS and ICG at various concentrations. In Candida albicans the combination of both ICG and CuS and light irradiation showed an antimicrobial dose-dependent effect with the reduction of at least 3-log in the cell counts for the combination of ICG + CuS at reduced concentrations. The observed antimicrobial effect was solely attributed to a photodynamic effect and any photothermal effect was avoided to discard any potential thermal injury in a potential clinical application. The generation of reactive oxygen species upon near infrared-light irradiation for those photosensitizers used was measured either alone or in combination. The cytocompatibility of the proposed materials at the doses used in photodynamic therapy was also demonstrated in human dermal fibroblasts and keratinocytes by cell culturing and flow cytometry studies.

Insights on the polypyrrole based nanoformulations for photodynamic therapy

This review is written to endow updated information on polypyrrole based photosensitizers for the treatment of deadly diseases such as cancer and microbial infection. Tetrapyrrolic macromolecules such as porphyrins and phthalocyanines hold unique photophysical properties which make them very useful compounds for various biomedical applications. Besides their properties, they also have some limitations such as low water solubility, bioavailability, biocompatibility and lack of specificity, etc. Researchers are trying to overcome these limitations by incorporating photosensitizers into the different types of nanoparticles and improve the quality of photodynamic therapy. We have contributed to this field by synthesizing and developing polypyrrolic photosensitizer based nanoparticles for potential applications in antimicrobial and anticancer photodynamic activity. Throughout this review, newly synthesized and existing PSs conjugated/encapsulated/doped/incorporated with nanoparticles are emphasized, which are essential for current and future research themes. Also in this review, we briefly summarized the research work carried over the past few years by considering the porphyrin based photosensitizers as alternative therapeutic entities for the treatment of microbial infections, cancers, and many other diseases.

Broad-Spectrum Photo-Antimicrobial Polymers Based on Cationic Polystyrene and Rose Bengal

New strategies to fight bacteria and fungi are necessary in view of the problem of iatrogenic and nosocomial infections combined with the growing threat of increased antimicrobial resistance. Recently, our group has prepared and described two new readily available materials based on the combination of Rose Bengal (singlet oxygen photosensitizer) and commercially available cationic polystyrene (macroporous resin Amberlite® IRA 900 or gel-type resin IRA 400). These materials showed high efficacy in the antimicrobial photodynamic inactivation (aPDI) of Pseudomonas aeruginosa. Here, we present the photobactericidal effect of these polymers against an extended group of pathogens like Escherichia coli, Enterococcus faecalis, Staphylococcus aureus, and the opportunistic yeast Candida albicans using green light. The most interesting finding is that the studied materials are able to reduce the population of both Gram-positive and Gram-negative bacteria with good activity, although, for C. albicans, in a moderate manner. In view of the results achieved and especially considering the inexpensiveness of these two types of photoactive polymers, we believe that they could be used as the starting point for the development of coatings for self-disinfecting surfaces.

Phthalocyanine-Functionalized Magnetic Silica Nanoparticles as Anion Chemosensors

Anionic species are one of the most common pollutants in residual and freshwaters. The presence of anthropogenic anions in water drastically increases the toxicity to living beings. Here, we report the preparation of a new optical active material based on tri(tosylamino)phthalocyanines grafted to ferromagnetic silica nanoparticles for anion detection and removal. The new unsymmetrical phthalocyanines (Pcs) proved to be excellent chemosensors for several anions (AcO−, Br−, Cl−, CN−, F−, H₂PO₄−, HSO₄−, NO₂−, NO₃−, and OH−) in dimethyl sulfoxide (DMSO). Furthermore, the Pcs were grafted onto magnetic nanoparticles. The resulting novel hybrid material showed selectivity and sensitivity towards CN−, F−, and OH− anions in DMSO with limit of detection (LoD) of ≈4.0 µM. In water, the new hybrid chemosensor demonstrated selectivity and sensitivity for CN− and OH− anions with LoD of ≈0.2 µM. The new hybrids are easily recovered using a magnet, allowing recyclability and reusability, after acidic treatment, without losing the sensing proprieties.

Magnetic Nanoplatforms for in Situ Modification of Macromolecules: Synthesis, Characterization, and Photoinactivating Power of Cationic Nanoiman-Porphyrin Conjugates

A nanoplatform concept was developed to synthesize accessible photoactive magnetic nanoparticles (MNPs) of Fe₃O₄ coated with silica. This approach was based on the covalent binding of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPPF₂₀) to aminopropyl-grafted MNPs by nucleophilic aromatic substitution reaction (S_NAr) to obtain conjugate MNP-P1. After in situ modification, the remaining pentafluorophenyl groups of TPPF₂₀ attached to MNPs were substituted by dimethylaminoethoxy groups to form MNP-P2. The basic amine group of these conjugates can be protonated in aqueous media. In addition, MNP-P1 and MNP-P2 were intrinsically charged to produce cationic conjugates MNP⁺-P1 and MNP⁺-P2⁺ by methylation. All of them were easily purified by magnetic decantation in high yields. The average size of the MNPs was ∼15 nm, and the main difference between these conjugates was the greater coating with positive charges of MNP⁺-P2⁺, as shown by the zeta potential values. Absorption spectra exhibited the Soret and Q bands characteristic of TPPF₂₀ linked to MNPs. Furthermore, these conjugates showed red fluorescence emission of porphyrin with quantum yields of 0.011-0.036. The photodynamic effect sensitized by the conjugates indicated the efficient formation of singlet molecular oxygen in different media, reaching quantum yield values of 0.17-0.34 in N,N-dimethylformamide. The photodynamic activity of the conjugates was evaluated to inactivate the Gram-positive bacteria Staphylococcus aureus, the Gram-negative bacteria Escherichia coli, and the yeast Candida albicans. The modified cationic MNP⁺-P2⁺ was the most effective conjugate for photodynamic inactivation (PDI) of microorganisms. Binding of this conjugate to bacteria and photoinactivation capability was checked by means of fluorescence microscopy. Also, sustainable use by recycling was determined after three PDI treatments. Therefore, this methodology is a suitable scaffold for the in situ modification of conjugates, and in particular, MNP⁺-P2⁺ represents a useful photodynamic active material to eradicate microorganisms.

Antimicrobial Photodynamic Therapy in the Control of COVID-19

Antimicrobial photodynamic therapy (aPDT), using well known, safe and cost-effective photosensitizers, such as phenothiazines, e.g., methylene blue (MB), or porphyrins, e.g., protoporphyrin-IX (PP-IX), might help to mitigate the COVID-19 either to prevent infections or to develop photoactive fabrics (e.g., masks, suits, gloves) to disinfect surfaces, air and wastewater, under artificial light and/or natural sunlight.

Surface Modification of Nanocrystalline TiO2 Materials with Sulfonated Porphyrins for Visible Light Antimicrobial Therapy

Highly-active, surface-modified anatase TiO2 nanoparticles were successfully synthesized and characterized. The morphological and optical properties of the obtained (metallo)porphyrin@qTiO2 materials were evaluated using absorption and fluorescence spectroscopy, scanning electron microscopy (SEM) imaging, and dynamic light scattering (DLS). These hybrid nanoparticles efficiently generated reactive oxygen species (ROS) under blue-light irradiation (420 ± 20 nm) and possessed a unimodal size distribution of 20–70 nm in diameter. The antimicrobial performance of the synthetized agents was examined against Gram-negative and Gram-positive bacteria. After a short-term incubation of microorganisms with nanomaterials (at 1 g/L) and irradiation with blue-light at a dose of 10 J/cm2, 2–3 logs of Escherichia coli, and 3–4 logs of Staphylococcus aureus were inactivated. A further decrease in bacteria viability was observed after potentiation photodynamic inactivation (PDI), either by H2O2 or KI, resulting in complete microorganism eradication even when using low material concentration (from 0.1 g/L). SEM analysis of bacteria morphology after each mode of PDI suggested different mechanisms of cellular disruption depending on the type of generated oxygen and/or iodide species. These data suggest that TiO2-based materials modified with sulfonated porphyrins are efficient photocatalysts that could be successfully used in biomedical strategies, most notably, photodynamic inactivation of microorganisms.

Application of Porphyrins in Antibacterial Photodynamic Therapy

Antibiotics are commonly used to control, treat, or prevent bacterial infections, however bacterial resistance to all known classes of traditional antibiotics has greatly increased in the past years especially in hospitals rendering certain therapies ineffective. To limit this emerging public health problem, there is a need to develop non-incursive, non-toxic, and new antimicrobial techniques that act more effectively and quicker than the current antibiotics. One of these effective techniques is antibacterial photodynamic therapy (aPDT). This review focuses on the application of porphyrins in the photo-inactivation of bacteria. Mechanisms of bacterial resistance and some of the current 'greener' methods of synthesis of meso-phenyl porphyrins are discussed. In addition, significance and limitations of aPDT are also discussed. Furthermore, we also elaborate on the current clinical applications and the future perspectives and directions of this non-antibiotic therapeutic strategy in combating infectious diseases.

New Materials Based on Cationic Porphyrins Conjugated to Chitosan or Titanium Dioxide: Synthesis, Characterization and Antimicrobial Efficacy

The post-functionalization of 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin tri-iodide, known as a highly efficient photosensitizer (PS) for antimicrobial photodynamic therapy (aPDT), in the presence of 3- or 4-mercaptobenzoic acid, afforded two new tricationic porphyrins with adequate carboxylic pending groups to be immobilized on chitosan or titanium oxide. The structural characterization of the newly obtained materials confirmed the success of the porphyrin immobilization on the solid supports. The photophysical properties and the antimicrobial photodynamic efficacy of the non-immobilized porphyrins and of the new conjugates were evaluated. The results showed that the position of the carboxyl group in the mercapto units or the absence of these substituents in the porphyrin core could modulate the action of the photosensitizer towards the bioluminescent Gram-negative Escherichia coli bacterium. The antimicrobial activity was also influenced by the interaction between the photosensitizer and the type of support (chitosan or titanium dioxide). The new cationic porphyrins and some of the materials were shown to be very stable in PBS and effective in the photoinactivation of E. coli bacterium. The physicochemical properties of TiO2 allowed the interaction of the PS with its surface, increasing the absorption profile of TiO2, which enables the use of visible light, inactivating the bacteria more efficiently than the corresponding PS immobilized on chitosan.

Porphyrinoid photosensitizers mediated photodynamic inactivation against bacteria

The multi-drug resistant bacteria have become a serious problem complicating therapies to such a degree that often the term "post-antibiotic era" is applied to describe the situation. The infections with methicillin-resistant S. aureus, vancomycin-resistant E. faecium, third generation cephalosporin-resistant E. coli, third generation cephalosporin-resistant K. pneumoniae and carbapenem-resistant P. aeruginosa have become commonplace. Thus, the new strategies of infection treatment have been searched for, and one of the approaches is based on photodynamic antimicrobial chemotherapy. Photodynamic protocols require the interaction of photosensitizer, molecular oxygen and light. The aim of this review is to provide a comprehensive overview of photodynamic antimicrobial chemotherapy by porphyrinoid photosensitizers. In the first part of the review information on the mechanism of photodynamic action and the mechanism of the bacteria resistance to the photodynamic technique were described. In the second one, it was described porphyrinoids photosensitizers like: porphyrins, chlorins and phthalocyanines useable in photodynamic bacteria inactivation.

A perylene-based membrane intercalating conjugated oligoelectrolyte with efficient photodynamic antimicrobial activity

A perylene probe PC4 acts as a membrane intercalating antimicrobial agent and a fluorescent microbial cell death marker.

Porphyrins containing basic aliphatic amino groups as potential broad-spectrum antimicrobial agents

New porphyrin derivatives bearing basic aliphatic amino groups were synthesized from the condensation of meso-4-[(3-N,N-dimethylaminopropoxy)phenyl]dipyrromethane, pentafluorobenzaldehyde and 4-(3-N,N-dimethylaminopropoxy)benzaldehyde. The reaction was catalyzed by trifluoroacetic acid in acetonitrile. This approach was used to obtain porphyrins with different patterns of substitution, of which three of them were isolated: 5,15-di(4-pentafluorophenyl)-10,20-di[4-(3-N,N-dimethylaminopropoxy)phenyl]porphyrin (F₁₀APP), 5-(4-pentafluorophenyl)-10,15,20-tris[4-(3-N,N-dimethylaminopropoxy)phenyl]porphyrin (F₅APP) and 5,10,15,20-tetrakis[4-(3-N,N-dimethylaminopropoxy)phenyl]porphyrin (TAPP). The UV-vis spectroscopic characterizations and the photodynamic effect of these compounds were compared in N,N-dimethylformamide. These porphyrins showed red fluorescence emission with quantum yields of 0.09-0.15. Moreover, they sensitized the production of singlet molecular oxygen, reaching quantum yields values of 0.33-0.53. Photodynamic inactivation was studied in two bacteria, Staphylococcus aureus and Escherichia coli, and a yeast Candida albicans. High amount of cell-bound porphyrin was obtained at short times (<2 min) of incubation. After 15 min irradiation, a 7 log reduction of S. aureus was found for cells treated with 1 μM F₅APP. Similar photokilling was obtained in E. coli, but using 7.5 μM F₅APP and 30 min irradiation. Under these conditions, a decrease of 5 log was observed in C. albicans cells. An increase in cell survival was observed by addition of sodium azide, whereas a slight protective effect was found in the presence of D-mannitol. Moreover, the photoinactivation mediated by these porphyrins was higher in D₂O than in water. Thus, these porphyrins induced the photodynamic activity mainly through the intermediacy of O₂(¹Δ_g). In particular, F₅APP was a highly effective photosensitizer with application as a broad-spectrum antimicrobial. This porphyrin contains three basic aliphatic amino groups that may be protonated at physiological pH. In addition, it is substituted by a lipophilic pentafluorophenyl group, which confers an amphiphilic character to the tetrapyrrolic macrocycle. This effect can increase the interaction with the cell envelopment, improving the photocytotoxic activity against the microorganisms.

Revisiting Current Photoactive Materials for Antimicrobial Photodynamic Therapy

Microbial infection is a severe concern, requiring the use of significant amounts of antimicrobials/biocides, not only in the hospital setting, but also in other environments. The increasing use of antimicrobial drugs and the rapid adaptability of microorganisms to these agents, have contributed to a sharp increase of antimicrobial resistance. It is obvious that the development of new strategies to combat planktonic and biofilm-embedded microorganisms is required. Photodynamic inactivation (PDI) is being recognized as an effective method to inactivate a broad spectrum of microorganisms, including those resistant to conventional antimicrobials. In the last few years, the development and biological assessment of new photosensitizers for PDI were accompanied by their immobilization in different supports having in mind the extension of the photodynamic principle to new applications, such as the disinfection of blood, water, and surfaces. In this review, we intended to cover a significant amount of recent work considering a diversity of photosensitizers and supports to achieve an effective photoinactivation. Special attention is devoted to the chemistry behind the preparation of the photomaterials by recurring to extensive examples, illustrating the design strategies. Additionally, we highlighted the biological challenges of each formulation expecting that the compiled information could motivate the development of other effective photoactive materials.

Magnetite–Corrole Hybrid Nanoparticles

This study describes the first example of a hybrid material comprising corrole- and silica-coated magnetite nanoparticles. Firstly, cuboid and spheroid magnetite nanoparticles were prepared using a simple hydrothermal route, followed by a silica coating. The hybrid nanoparticles were obtained by promoting a covalent link between a gallium (III)(pyridine) complex of 5,10,15-tris(pentafluorophenyl)corrole (GaPFC) and the surface of magnetite–silica core/shell nanoparticles (Fe3O4@SiO2), shaped both as cuboids and spheroids. The hybrids were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), ultraviolet-visible spectrophotometry (UV-Vis) and transmission electron microscopy (TEM). Preliminary studies on the capacity of singlet oxygen generation of the hybrid nanoparticles showed that these have lower efficiency values when compared to the pure corrole compound.

Silica nanoparticles embedded with water insoluble phthalocyanines for the photoinactivation of microorganisms

Silica nanoparticles (SiNPs) embedded with Zn(II) 2,9,16,23-tetrakis(methoxy)phthalocyanine (SiNPZnPcOCH₃), Zn(II) 2,9,16,23-tetrakis(4-pyridyloxy) phthalocyanine (SiNPZnPcOPy) and Zn(II) 2,9,16,23-tetrakis(t-butyl) phthalocyanine (SiNPZnPctBu) were synthesized in the nonpolar core of AOT/1-butanol/water micelles using triethoxyvinylsilane and 3-aminopropyltriethoxysilane. These SiNPs-Pc presented an average diameter of about 20-25 nm. UV-vis absorption spectra presented the characteristic Soret and Q bands of phthalocyanines embedded into the nanoparticles. Moreover, red fluorescence emission of SiNPs bearing phthalocyanines was detected in water. The SiNPs-Pc produced the photodecomposition of 2,2'-(anthracene-9,10-diyl)bis(methylmalonic acid), which was used to sense the singlet molecular oxygen O₂(¹Δ_g) generation in aqueous medium. Also, the formation of superoxide anion radical was detected by nitro blue tetrazolium reduction in the presence of NADH. Photoinactivation of microorganisms was investigated in Staphylococcus aureus and Candida albicans. In vitro experiments showed that photosensitized inactivation induced by SiNPZnPcOCH₃ and SiNPZnPctBu improved with an increase of irradiation times. After 30 min irradiation, over 7 log reduction was found for S. aureus. Also, these SiNPs-Pc produced a decrease of 2.5 log in C. albicans after 60 min irradiation. In both cases, a lower photoinactivation activity was found for SiNPZnPcOPy. Studies of photodynamic action mechanism showed that the photokilling of microbial cells was protected in the presence of sodium azide and diazabicyclo[2.2.2]octane. Also, a reduction on the cell photodamage was found with the addition of D-mannitol. Therefore, the photodynamic activity sensitized by SiNPZnPcOCH₃ and SiNPZnPctBu in microbial cells was mediated by a contribution of both type I and type II photooxidative mechanisms. Thus, silica nanoparticles are interesting materials to vehicle ZnPcOCH₃ and ZnPctBu in aqueous media to photoeradicate microorganisms.

Evaluation of meso-substituted cationic corroles as potential antibacterial agents

Cationic derivatives of 5,10,15-tris[4-(pyridin-4-ylsulphanyl)-2,3,5,6-tetrafluorophenyl]-corrolategallium(III)pyridine and 5,10,15-tris[4-(pyridin-2-ylsulfanyl)-2,3,5,6-tetrafluorophenyl]-correlategallium(III)pyridine were synthesized and their photosensitizing properties against the naturally bioluminescent Gram-negative bacterium Allivibrio fischeri were evaluated. The cationic corrole derivatives exhibited antibacterial activity at micromolar concentrations against this Gram-negative bacterium strain.

Antimicrobial Photodynamic Therapy to Control Clinically Relevant Biofilm Infections

Biofilm describes a microbially-derived sessile community in which microbial cells are firmly attached to the substratum and embedded in extracellular polymeric matrix. Microbial biofilms account for up to 80% of all bacterial and fungal infections in humans. Biofilm-associated pathogens are particularly resistant to antibiotic treatment, and thus novel antibiofilm approaches needed to be developed. Antimicrobial Photodynamic therapy (aPDT) had been recently proposed to combat clinically relevant biofilms such as dental biofilms, ventilator associated pneumonia, chronic wound infections, oral candidiasis, and chronic rhinosinusitis. aPDT uses non-toxic dyes called photosensitizers (PS), which can be excited by harmless visible light to produce reactive oxygen species (ROS). aPDT is a multi-stage process including topical PS administration, light irradiation, and interaction of the excited state with ambient oxygen. Numerous in vitro and in vivo aPDT studies have demonstrated biofilm-eradication or substantial reduction. ROS are produced upon photo-activation and attack adjacent targets, including proteins, lipids, and nucleic acids present within the biofilm matrix, on the cell surface and inside the microbial cells. Damage to non-specific targets leads to the destruction of both planktonic cells and biofilms. The review aims to summarize the progress of aPDT in destroying biofilms and the mechanisms mediated by ROS. Finally, a brief section provides suggestions for future research.

Improved Optical and Morphological Properties of Vinyl-Substituted Hybrid Silica Materials Incorporating a Zn-Metalloporphyrin

This work is focused on a novel class of hybrid materials exhibiting enhanced optical properties and high surface areas that combine the morphology offered by the vinyl substituted silica host, and the excellent absorption and emission properties of 5,10,15,20-tetrakis(N-methyl-4-pyridyl)porphyrin-Zn(II) tetrachloride as a water soluble guest molecule. In order to optimize the synthesis procedure and the performance of the immobilized porphyrin, silica precursor mixtures of different compositions were used. To achieve the requirements regarding the hydrophobicity and the porous structure of the gels for the successful incorporation of porphyrin, the content of vinyltriacetoxysilane was systematically changed and thoroughly investigated. Substitution of the silica gels with organic groups is a viable way to provide new properties to the support. An exhaustive characterization of the synthesized silica samples was realised by complementary physicochemical methods, such as infrared spectroscopy (FT-IR), absorption spectroscopy (UV-Vis) and photoluminescence, nuclear magnetic resonance spectroscopy (²⁹Si-MAS-NMR) transmission and scanning electron microscopy (TEM and SEM), nitrogen absorption (BET), contact angle (CA), small angle X ray and neutron scattering (SAXS and SANS). All hybrids showed an increase in emission intensity in the wide region from 575 to 725 nm (Q bands) in comparison with bare porphyrin. By simply tuning the vinyltriacetoxysilane content, the hydrophilic/hydrophobic profile of the hybrid materials was changed, while maintaining a high surface area. Good control of hydrophobicity is important to enhance properties such as dispersion, stability behaviour, and resistance to water, in order to achieve highly dispersible systems in water for biomedical applications.

Photophysicochemical behaviour and antimicrobial properties of monocarboxy Mg (II) and Al (III) phthalocyanine-magnetite conjugates

Asymmetric Mg (II) or Al (III) phthalocyanine (containing a COOH group and 3-pyridylsulfanyl units) was conjugated via an amide bond to amino functionalized magnetic nanoparticle (AIMN) to form MgPc-AIMN or AlPc-AIMN conjugate, and characterized. The photophysicochemical behaviour of the phthalocyanine-AIMN conjugates was investigated and compared to the asymmetric Pcs and to the simple mixture of Pc with AIMNs without a chemical bond, (MPc-AIMN (mixed)). The directed covalent linkage of AIMNs to the asymmetrical metallopthalocyanines afforded improvements in the singlet oxygen (Ф_Δ) and triplet state quantum yield (Ф_T) as well as singlet oxygen lifetimes for the MPcs-AIMN-linked conjugates compared to MPc-AIMN (mixed) and MPcs alone. The asymmetric phthalocyanines and their conjugates showed effective antimicrobial activity against Escherichia coli bacteria under illumination.

Biological evaluation of a Porphyrin-SPION nanoconjugate as an antimicrobial magnetic photosensitizer

The present work describes the use of a magnetic porphyin (5-(4-carboxy-phenyl)-10,15,20-triphenyl-21H, 23H-porphyrin TPP) nanoconjugate (SPION-TPP) for destroying pathogenic bacteria followed by the recovery of the magnetic photosensitizer. SPION-TPP was tested for its activity against two different gram-positive bacterial strains (Staphylococcus aureus and Steptoccoccus mutans). It is observed that SPION-TPP at a very low concentration of 0.5 [Formula: see text]M is effective in destroying gram-positive bacteria (10[Formula: see text]–10[Formula: see text] CFU ml[Formula: see text] S. aureus with several orders reduction and few orders in S. mutans. The aim of this work is to combine photoactivity against microorganisms imparted by the photosensitizer with the possibility of recovering the nanoconstruct with magnets for disposal/reuse.

β-Formyl- and β-Vinylporphyrins: Magic Building Blocks for Novel Porphyrin Derivatives

Porphyrins bearing formyl or vinyl groups have been explored as starting materials to prepare new compounds with adequate features for different applications. In this review it is discussed mainly synthetic strategies based on the reaction of meso-tetraarylporphyrins bearing those groups at β-pyrrolic positions. The use of some of the obtained porphyrin derivatives for further transformations, namely via pericyclic reactions, is also highlighted.

Structural and Epimeric Isomers of HPPH [3-Devinyl 3-{1-(1-hexyloxy) ethyl}pyropheophorbide-a]: Effects on Uptake and Photodynamic Therapy of Cancer

The tetrapyrrole structure of porphyrins used as photosentizing agents is thought to determine uptake and retention by malignant epithelial cancer cells. To assess the contribution of the oxidized state of individual rings to these cellular processes, bacteriochlorophyll a was converted into the ring "D" reduced 3-devinyl-3-[1-(1-hexyloxy)ethyl]pyropheophorbide-a (HPPH) and the corresponding ring "B" reduced isomer (iso-HPPH). The carboxylic acid analogs of both ring "B" and ring "D" reduced isomers showed several-fold higher accumulation into the mitochondria and endoplasmic reticulum by primary culture of human lung and head and neck cancer cells than the corresponding methyl ester analogs that localize primarily to granular vesicles and to a lesser extent to mitochondria. However, long-term cellular retention of these compounds exhibited an inverse relationship with tumor cells generally retaining better the methyl-ester derivatives. In vivo distribution and tumor uptake was evaluated in the isogenic model of BALB/c mice bearing Colon26 tumors using the respective ¹⁴C-labeled analogs. Both carboxylic acid derivatives demonstrated similar intracellular localization and long-term tumor cure with no significant skin phototoxicity. PDT-mediated tumor action involved vascular damage, which was confirmed by a reduction in blood flow and immunohistochemical assessment of damage to the vascular endothelium. The HPPH stereoisomers (epimers) showed identical uptake (in vitro & in vivo), intracellular retention and photoreaction.

Antimicrobial Photodynamic Therapy against Endodontic Enterococcus faecalis and Candida albicans Mono and Mixed Biofilms in the Presence of Photosensitizers: A Comparative Study with Classical Endodontic Irrigants

Endodontic biofilms eradication from the infected root canal system remains as the primary focus in endodontic field. In this study, it was assessed the efficacy of antimicrobial Photodynamic Therapy (aPDT) with the Zn(II)chlorin e6 methyl ester (Zn(II)e₆Me) activated by red light against monospecies and mixed biofilms of Enterococcus faecalis and Candida albicans. The results were compared with the ones obtained with Rose Bengal (RB), Toluidine Blue-O (TBO), the synthetic tetracationic porphyrin (TMPyP) as well as classical endodontic irrigants (3% NaOCl, 17% EDTA and 2% CHX). The antimicrobial efficacy of aPDT toward monospecies and mixed biofilms was quantified resorting to safranin red method. The changes of biofilm organization and of cellular ultrastructure were evaluated through several microscopy techniques (light, laser confocal and transmission electron microscopy). Zn(II)e₆Me once activated with light for 60 or 90 s was able to remove around 60% of the biofilm’s biomass. It was more efficient than TBO and RB and showed similar efficiency to TMPyP and classical irrigants, CHX and EDTA. As desirable in a PS, Zn(II)e₆Me in the dark showed smaller activity than TMPyP. Only NaOCl revealed higher efficiency, with 70–90% of the biofilm’s biomass removal. The organization of biofilms and the normal microbial cell ultrastructure were extensively damaged by the presence of Zn(II)e₆Me. aPDT with Zn(II)e₆Me showed to be an efficient antimicrobial strategy deserving further studies leading to a future clinical usage in endodontic disinfection.

Graphene-Embedded Hydrogel Nanofibers for Detection and Removal of Aqueous-Phase Dyes

A facile route to graphene/polymer hydrogel nanofibers was developed. An aqueous dispersion of graphene (containing >40% bilayer graphene flakes) stabilized by a functionalized water-soluble polymer with phenyl side chains was successfully electrospun to yield nanofibers. Subsequent vapor-phase cross-linking of the nanofibers produced graphene-embedded hydrogel nanofibers (GHNFs). Interestingly, the GHNFs showed chemical sensitivity to the cationic dyes methylene blue (MB) and crystal violet (CV) in the aqueous phase. The adsorption capacities were as high as 0.43 and 0.33 mmol g^-1 s^-1 for MB and CV, respectively, even in a 1.5 mL s^-1 flow system. A density functional theory calculation revealed that aqueous-phase MB and CV dyes were oriented parallel to the graphene surface and that the graphene/dye ensembles were stabilized by secondary physical bonding mechanisms such as the π-π stacking interaction in an aqueous medium. The GHNFs exhibited electrochemical properties arising mainly from the electric double-layer capacitance, which were applied in a demonstration of GHNF-based membrane electrodes (5 cm in diameter) for detecting the dyes in the flow system. It is believed that the GHNF membrane can be a successful model candidate for commercialization of graphene due to its easy-to-fabricate process and remarkable properties.

An effective and potentially safe blood disinfection protocol using tetrapyrrolic photosensitizers

Aim: Conventional disinfection techniques, considered safe for plasma, are usually associated with collateral damages on concentrated platelets and erythrocytes. Alternative methods are required and antimicrobial photodynamic therapy (aPDT) seems promising. In this study the effectiveness of two photosensitizers (PS), a porphyrin and a phthalocyanine, to disinfect blood products was evaluated. Results: The cationic porphyrin was more effective in the photoinactivation of bacteria. Also, no significant osmotic stress was found for samples treated with PS at 5.0 µM in isotonic conditions after antimicrobial photodynamic therapy. Conclusion: Effective reduction of Gram-positive bacteria at 5.0 µM of PS provided promising indications toward its safe use to disinfect blood samples. For Gram-negative bacteria, lower PS concentrations, between 5.0 and 10 µM, must be tested.

Mannose-Functionalized Hyperbranched Polyglycerol Loaded with Zinc Porphyrin: Investigation of the Multivalency Effect in Antibacterial Photodynamic Therapy

The antibacterial photodynamic activity of hyperbranched polyglycerol (hPG) loaded with zinc porphyrin photosensitizers and mannose units was investigated. hPG, with a M_W of 19.5 kDa, was functionalized with about 15 molecules of the photosensitizer {5,10,15-tris(3-hydroxyphenyl)-20-[4-(prop-2-yn-1-ylamino)tetrafluorophenyl]porphyrinato}-zinc(II) by using copper(I)-catalyzed 1,3-dipolar cycloaddition (CuAAC). These nanoparticle conjugates were functionalized systematically with increasing loadings of mannose in the range of approximately 20 to 110 groups. With higher mannose loadings (ca. 58-110 groups) the water-insoluble zinc porphyrin photosensitizer could thus be transferred into a water-soluble form. Targeting of the conjugates was proven in binding studies to the mannose-specific lectin concanavalin A (Con A) by using surface plasmon resonance (SPR). The antibacterial phototoxicity of the conjugates on Staphylococcus aureus (as a typical Gram-positive germ) was investigated in phosphate-buffered saline (PBS). It was shown that conjugates with approximately 70-110 mannose units exhibit significant antibacterial activity, whereas conjugates with approximately 20-60 units did not induce bacterial killing at all. These results give an insight into the multivalency effect in combination with photodynamic therapy (PDT). On addition of serum to the bacterial cultures, a quenching of this antibacterial phototoxicity was observed. In fluorescence studies with the conjugates in the presence of increasing bovine serum albumin (BSA) concentrations, protein-conjugate associations could be identified as a plausible cause for this quenching.

Synthesis and bactericidal properties of porphyrins immobilized in a polyacrylamide support: influence of metal complexation on photoactivity

Development of three porphyrin immobilised polyacrylamide hydrogels active against Gram negative bacteria to be used as antimicrobial materials.

Photoactive antimicrobial nanomaterials

Nanomaterials for killing pathogenic bacteria under light irradiation.

Synthesis under high hydrostatic pressure — a new method to prepare 5,10,15,20-tetrakis[4-(substituted amino)-2,3,5,6-tetrafluorophenyl]porphyrins

5,10,15,20-Tetrakis(pentafluorophenyl)porphyrin reacts with primary alkylamines and heterocyclic amines, at 50°C and under high pressure (450 MPa), to produce the [Formula: see text]-substituted tetraamino derivatives in high yields. Under similar conditions, the reaction with the bulky dibutylamine and dipentylamine affords the corresponding mono-substituted dialkylaminoporphyrins in 10% yield. This new protocol arises as a considerable improvement of the methods already known, which usually require high temperatures and are not effective when using secondary amines having long alkyl groups.