A Near-Infrared Fluorescence Turn-On Sensor for Sulfide Anions

Activity-Based Fluorescent Probes for Hydrogen Sulfide and Related Reactive Sulfur Species

Hydrogen sulfide (H2S) is not only a well-established toxic gas but also an important small molecule bioregulator in all kingdoms of life. In contemporary biology, H2S is often classified as a "gasotransmitter," meaning that it is an endogenously produced membrane permeable gas that carries out essential cellular processes. Fluorescent probes for H2S and related reactive sulfur species (RSS) detection provide an important cornerstone for investigating the multifaceted roles of these important small molecules in complex biological systems. A now common approach to develop such tools is to develop "activity-based probes" that couple a specific H2S-mediated chemical reaction to a fluorescent output. This Review covers the different types of such probes and also highlights the chemical mechanisms by which each probe type is activated by specific RSS. Common examples include reduction of oxidized nitrogen motifs, disulfide exchange, electrophilic reactions, metal precipitation, and metal coordination. In addition, we also outline complementary activity-based probes for imaging reductant-labile and sulfane sulfur species, including persulfides and polysulfides. For probes highlighted in this Review, we focus on small molecule systems with demonstrated compatibility in cellular systems or related applications. Building from breadth of reported activity-based strategies and application, we also highlight key unmet challenges and future opportunities for advancing activity-based probes for H2S and related RSS.

A Chalcone-based Fluorescence Probe for H2S Detecting Utilizing ESIPT Coupled ICT Mechanism

The accurate and effective identification of hydrogen sulfide holds great significance for environmental monitoring. Azide-binding fluorescent probes are powerful tools for hydrogen sulfide detection. We combined the 2'-Hydroxychalcone scaffold with azide moiety to construct probe Chal-N3, the electron-withdrawing azide moiety was utilized to block the ESIPT process of 2'-Hydroxychalcone and quenches the fluorescence. The fluorescent probe was triggered with the addition of hydrogen sulfide, accompanied by great fluorescence intensity enhancement with a large Stokes shift. With excellent fluorescence properties including high sensitivity, specificity selectivity, and wider pH range tolerance, the probe was successfully applied to natural water samples.

A turn-on fluorescent probe for selective detection of H2S in environmental samples and bio-imaging in human breast cancer cells

A triphenylamine-benzothaizole-based turn-on fluorescent probe TPB-NO2 was designed and synthesized for tracking H2S in both environmental and biological samples depending upon the sensing strategy of thiolysis of 2,4-dinitrophenyl (DNP) ether. Due to PET (photoinduced electron transfer), occurring from donor triphenylamine moiety to acceptor DNP moiety, the probe TPB-NO2 itself is very weakly fluorescent and colorless in DMSO/H2O solution (1 : 1, v/v; 10 mM HEPES buffer, pH 7.4). But the addition of H2S leads to thiolysis of 2,4-dinitrophenyl ether to block the initial PET process and hence it exhibits naked eye detectable turn-on response with bright cyan fluorescence and intense brown color. Not only that, the probe exhibits excellent selectivity over other bio-thiols like Cysteine (Cys), homocysteine (Hcy), and glutathione (GSH), fast response time (<2 min), and high sensitivity with a detection limit of 9.81 nM. Moreover, to explore the practical applicability of our probe we employed it to monitor H2S successfully in environmental water samples, solid-state TLC strip study, Quantitative determination of H2S in eggs, and in the bioimaging of human breast cancer cells (MDA-MB 231).

An overview on the development of different optical sensing platforms for adenosine triphosphate (ATP) recognition

Adenosine triphosphate (ATP), one of the biological anions, plays a crucial role in several biological processes including energy transduction, cellular respiration, enzyme catalysis and signaling. ATP is a bioactive phosphate molecule, recognized as an important extracellular signaling agent. Apart from serving as a universal energy currency for various cellular events, ATP is also considered a factor responsible for numerous physiological activities. It regulates cellular metabolism by breaking phosphoanhydride bonds. Several diseases have been reported widely based on the levels and behavior of ATP. The variation of ATP concentration usually causes a foreseeable impact on mitochondrial physiological function. Mitochondrial dysfunction is responsible for the occurrence of many severe diseases such as angiocardiopathy, malignant tumors and Parkinson's disease. Therefore, there is high demand for developing a sensitive, fast-responsive, nontoxic and versatile detection platform for the detection of ATP. To this end, considerable efforts have been employed by several research groups throughout the world to develop specific and sensitive detection platforms to recognize ATP. Although a repertoire of optical chemosensors (both colorimetric and fluorescent) for ATP has been developed, many of them are not arrayed appropriately. Therefore, in this present review, we focused on the design and sensing strategy of some chemosensors including metal-free, metal-based, sequential sensors, aptamer-based sensors, nanoparticle-based sensors etc. for ATP recognition via diverse binding mechanisms.

A BODIPY-based fluorescent chemosensor with 2, 6-substitution for visual and highly selective detection of S2

BODIPY derivatives have often been employed as fluorescent sensors to probe toxic ions in environment and living systems, such as sulfide ion (S^2-). Whilst many structure modifications have been exploited on groups at the 3, 5, 8-positions, there are quite few examples on tailoring the 2,6-substituents for chemosensor investigations. Herein, we design and synthesize a 2,6-substituted BODIPY molecule, LM-BDP, to use as a fluorescent probe for detecting S^2- in aqueous media. The electronic and crystal structures of the probe are studied by density functional theory (DFT) calculations and single-crystal X-ray diffraction analysis. Spectroscopy investigations are performed in a variety of conditions, showing that LM-BDP exhibits a noticeable color change from pink to dark red and a fluorescence shift from yellow to pink channel with decreased intensity upon addition of S^2-. The selectivity and sensitivity measurements show that LM-BDP can only response to S^2- with a detection limit of 0.29 μM in less than 100 s. The remarkable contrast in fluorescence images in test-stripe and RAW 264.7 cell experiments indicates that the probe is a proper candidate for the application in detecting exogenous S^2-.

Aryl-Phenanthro[9,10-d]imidazole: A Versatile Scaffold for the Design of Optical-Based Sensors

Fluorescent and colorimetric sensors are important tools for investigating the chemical compositions of different matrices, including foods, environmental samples, and water. The high sensitivity, low interference, and low detection limits of these sensors have inspired scientists to investigate this class of sensing molecules for ion and molecule detection. Several examples of fluorescent and colorimetric sensors have been described in the literature; this Review focuses particularly on phenanthro[9,10-d]imidazoles. Different strategies have been developed for obtaining phenanthro[9,10-d]imidazoles, which enable modification of their optical properties upon interaction with specific analytes. These sensing responses usually involve changes in the fluorescence intensity and/or color arising from processes like photoinduced electron transfer, intramolecular charge transfer, intramolecular proton transfer in the excited state, and Förster resonance energy transfer. In this Review, we categorized these sensors into two different groups: those bearing formyl groups and their derivatives and those based on other molecular groups. The different optical responses of phenanthro[9,10-d]imidazole-based sensors upon interaction with specific analytes are discussed.

Recent development in fluorescent probes for copper ion detection

Abstract:

Copper is the third most common heavy metal and an indispensable component of life. Variations of body copper levels, both structural and cellular, are related to a number of disorders; consequently, pathophysiological importance of copper ions demands the development of sensitivity and selective for detecting these organisms in biological systems. In recent years, the area of fluorescent sensors for detecting copper metal ions has seen revolutionary advances. Consequently, closely related fields have raised awareness of several diseases linked to copper fluctuations. Further developments in this field of analysis could pave the way for new and innovative treatments to combat these diseases. This review reports on recent progress in the advancement of three fields of fluorescent probes; chemodosimeters, near IR fluorescent probes, and ratiometric fluorescent probes. Methods used to develop these fluorescent probes and the mechanisms that govern their reaction to specific analytes and their applications in studying biological systems, are also given.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

A Chromo-Fluorogenic Naphthoquinolinedione-Based Probe for Dual Detection of Cu2+ and Its Use for Various Water Samples

The presence of an abnormal amount of Cu²⁺ in the human body causes various health issues. In the current study, we synthesized a new naphthoquinolinedione-based probe (probe 1) to monitor Cu²⁺ in different water systems, such as tap water, lakes, and drain water. Two triazole units were introduced into the probe via a click reaction to increase the binding affinity to a metal ion. In day-light, probe 1 dissolved in a mixed solvent system (HEPES: EtOH = 1:4) showed a vivid color change from light greenish-yellow to pink in the presence of only Cu²⁺ among various metal ions. In addition, the green luminescence and fluorescence emission of the probe were effectively bleached out immediately after Cu²⁺ addition. The limit of detection (LOD) of the probe was 0.5 µM when a ratio-metric method was used for metal ion detection. The fluorescence titration data of the probe with Cu²⁺ showed a calculated LOD of 41.5 pM. Hence, probe 1 possesses the following dual response toward Cu²⁺ detection: color change and fluorescence quenching. Probe 1 was also useful for detecting Cu²⁺ spiked in tap/lake water as well as the cytoplasm of live HeLa cells. The current system was investigated using ultraviolet-visible and fluorescence spectroscopy as well as density functional theory calculations (DFT).

Cost-effective diagnostic kits for selective detection of gaseous H2S

Unsymmetrical tri-functionalized perylene diimide dyes were explored for making solution- and solid-state-based colorimetric kits for the detection of gaseous and aqueous H2S.

Research progress of near-infrared fluorescence probes based on indole heptamethine cyanine dyes in vivo and in vitro

Near-infrared (NIR) fluorescence imaging is a noninvasive technique that provides numerous advantages for the real-time in vivo monitoring of biological information in living subjects without the use of ionizing radiation. Near-infrared fluorescent (NIRF) dyes are widely used as fluorescent imaging probes. These fluorescent dyes remarkably decrease the interference caused by the self-absorption of substances and autofluorescence, increase detection selectivity and sensitivity, and reduce damage to the human body. Thus, they are beneficial for bioassays. Indole heptamethine cyanine dyes are widely investigated in the field of near-infrared fluorescence imaging. They are mainly composed of indole heterocyclics, heptamethine chains, and N-substituent side chains. With indole heptamethine cyanine dyes as the parent, introducing reactive groups to the parent compounds or changing their structures can make fluorescent probes have different functions like labeling protein and tumor, detecting intracellular metal cations, which has become the hotspot in the field of fluorescence imaging of biological research. Therefore, this study reviewed the applications of indole heptamethine cyanine fluorescent probes to metal cation detection, pH, molecules, tumor imaging, and protein in vivo. The distribution, imaging results, and metabolism of the probes in vivo and in vitro were described. The biological application trends and existing problems of fluorescent probes were discussed.

A natural cyanobacterial protein C-phycoerythrin as an HS- selective optical probe in aqueous systems

A naturally fluorescent cyanobacterial protein C-phycoerythrin (CPE) was investigated as a fluorescent probe for biologically and environmentally important hydrosulphide (HS^-) ion. It was selective for HS amongst a large anion screen and the optical response was rapid. Sequential UV-visible titration showed considerable peak shift and attenuation with increasing [HS^-] while fluorescence titration proved that HS^- quenched CPE fluorescence in a concentration dependent manner. The linear response range was 0-2 mM HS^- while the Stern Volmer curve was non-linear and the limit of detection was 185.12 μM. Except bicarbonate and glycine, no anion or biomolecule interfered with the detection even at 10 times the concentration of HS^-. It was also free of influences from other sulphur forms like sulphite, sulphate and thiosulphate. CPE reliably detected HS^- in freshwater and effluent samples, though some under- and over - estimation was evident. The % recovery ranged from ~96 to 105% (RSD ~ 0.035-0.188%). FTIR analysis showed significant changes in the amide I and II regions of CPE, along with minor modifications in the amide III region as well, showing that HS^- was able to influence the protein secondary structure at higher concentrations.

Synthesis and application of a new chemosensor based on the thiazolylazo-quinazolinone hybrid for detection of F- and S2- in aqueous solutions

A new chemosensor based on the thiazolylazo-quinazolinone hybrid (TAQH) was designed and synthesized for naked-eye sensitive detection of F^- and S^2-in aqueous acetonitrile solution. Spectral characterization of TAQH using FT-IR, ¹H NMR, and ¹³C NMR analysis revealed that the probe TAQH was successfully synthesized using a two steps reaction, including the diazotization-coupling and condensation reactions, respectively. The ion sensing ability of TAQH toward a wide range of anions and metal ions was evaluated by naked-eye detection method and UV-Vis absorption spectroscopy. The chemosensor TAQH displayed a fast and clear color change from yellow to red in the presence of F^- and S^2- ions, enabling easily detect with the naked eye. This clear color change is due to the effective interaction of the basic F^- and S^2- anions with hydroxyl group of chemosensor as a binding site. The experimental data also revealed that the F^- and S^2- ions were sensed by the probe TAQH over a wide pH range from 3 to 8. The results also confirmed that the TAQH has a wide linear detection range for F^- and S^2- ions. From UV-vis titration experiment, the limit of detection (LOD) for F^- and S^2- ions was found to be 3.1 μM and 5.7 μM, respectively. For quantitative measurements, the paper test strips containing TAQH were successfully fabricated and applied to detect F^- and S^2- ions in aqueous solutions. Furthermore, Job's plot based on spectroscopic data showed one-to-one stoichiometry for the interaction of anions with probe TAQH. Therefore, the proposed chemosensor with excellent features like the cost-effective, high sensitively and selectively and short response times can be utilized in any physical and biological conditions.

A Metallosupramolecular Coordination Polymer for the 'Turn-on' Fluorescence Detection of Hydrogen Sulfide

A coumarin based probe for the efficient detection of hydrogen sulfide in aqueous medium is reported. The investigated coumarine-based derivative forms spherical nanoparticles in aqueous media. In presence of Pd2+, a metallosupramolecular coordination polymer is formed, which is accompanied by quenching of the coumarin emission at 390 nm. Its Pd2+ complex could be used as a probe for chemoselective detection of monohydrogensulfide (HS-). Presence of HS- leads to a'turn-on' fluorescence signal, resulting from decomplexation of Pd2+ from the metallosupramolecular probe. The probe was successfully applied for qualitative and quantitative detection of HS- in different sources of water directly collected from sea, river, tap and laboratory drain water, as well as in growth media for aquatic species.

One minute synthesis of green fluorescent copper nanocluster: The preparation of smartphone aided paper-based kit for on-site monitoring of nanomolar level mercury and sulfide ions in environmental samples

We wish to report, a minute synthesis of green fluorescent copper nanocluster by simple sonication. 1-Thio-β-d-glucose was used as a capping ligand to synthesis copper nanocluster (TG-CuNCs). The TG-CuNCs exhibit the emission maximum at 430 nm. The synthesized TG-CuNCs was well characterized by UV-vis, fluorescent, XRD, HR-TEM and FT-IR techniques. After the addition of Hg²⁺ or S^2- into TG-CuNCs, the fluorescence was quenched. Based on the quenching of fluorescence, we have calculated the detection limit 1.7 nM and 1.02 nM for Hg²⁺ and S^2-, respectively. Finally, we have applied TG-CuNCs for the detection of Hg²⁺ and S^2- in tap, river, pond water. Importantly, the smartphone aided paper-based kit was developed for on-site monitoring of Hg²⁺ and S^2- ions. To the best of our knowledge, this is the first report for the one-minute synthesis of TG-CuNCs and the preparation of smartphone aided paper-based kit for on-site monitoring of Hg²⁺ and S^2- ions. Further, it is anticipated that this synthesis of TG-CuNCs and smartphone aided paper-based kit for Hg²⁺ and S^2- will be useful materials in the filled with the biosensor, material science and nanotechnology.

A Copper (II) Ensemble-Based Fluorescence Chemosensor and Its Application in the 'Naked-Eye' Detection of Biothiols in Human Urine

Quick and effective detection of biothiols in biological fluids has gained increasing attention due to its vital biological functions. In this paper, a novel reversible fluorescence chemosensor (L-Cu2+) based on a benzocoumarin-Cu2+ ensemble has been developed for the detection of biothiols (Cys, Hcy and GSH) in human urine. The chemosensing ensemble (L-Cu2+) contains a 2:1 stoichiometry structure between fluorescent ligand L and paramagnetic Cu2+. L was found to exclusively bond with Cu2+ ions accompanied with a dramatic fluorescence quenching maximum at 443 nm and an increase of an absorbance band centered at 378 nm. Then, the in situ generated fluorescence sluggish ensemble, L-Cu2+, was successfully used as a chemosensor for the detection of biothiols with a fluorescence "OFF-ON" response modality. Upon the addition of biothiols, the decomplexation of L-Cu2+ led to the liberation of the fluorescent ligand, L, resulting in the recovery of fluorescence and absorbance spectra. Studies revealed that L-Cu2+ possesses simple synthesis, excellent stability, high sensitivity, reliability at a broad pH range and desired renewability (at least 5 times). The practical application of L-Cu2+ was then demonstrated by the detection of biothiols in human urine sample.

Structural divergence in binuclear Cu(ii) pyridoxal Schiff base complexes probed by co-ligands: catecholase mimetic activity and sulphide ion sensing

Three Cu(ii) complexes showing efficient catecholase activity, with pronounced solvent sensitivity, S²⁻sensing ability in micromolar concentrations, and coligand dependent denticity of the pyridoxal Schiff base ligand are reported.

Reactivity of ZrO(MFP) and ZrO(RP) Nanoparticles with LnCl3 for Solvatochromic Luminescence Modification and pH-Dependent Optical Sensing

The luminescence of the inorganic-organic hybrid nanoparticles ZrO(MFP) (MFP=methylfluorescein phosphate) and ZrO(RP) (RP=resorufin phosphate) was modified by addition of different rare earth halides LnCl3 . The resulting composite materials form dispersible nanoparticles that exhibit modified nanoparticle fluorescence depending on the rare earth ion. The resulting chromaticity of the luminescence is further variable by the employment of different solvents for ZrO(MFP)-based composite systems. The strong solvatochromic effect of the MFP chromophore leads to different luminescence chromaticities of the composite materials between green, yellow, and blue in THF, toluene, and dichloromethane, respectively. The luminescence of ZrO(RP)-based composite particles can be modified between the red and blue spectral regions in dependence on the applied reaction temperature. Beside a luminescence shift that is derived from nanoparticle modification by LnCl3 , a strong turn-on effect of ZrO(RP) particles results after contact with different Brønsted acids and bases in combination with a respective chromaticity shift. Both effects enable the potential employment of such particles as highly sensitive optical pH sensors.

Preparation of anthracene-based tetraperimidine hexafluorophosphate and selective recognition of chromium(III) ions

A novel anthracene-based tetraperimidine hexafluorophosphate 3 was prepared, and its structure was determined through X-ray analysis, HRMS as well as ¹H and ¹³C NMR spectroscopy. In the cationic moiety of 3, two (N-ethylperimidinyl–C₂H₄)₂NCH₂– arms were attached to the 9- and 10-positions of anthracene. In addition, compound 3 was used as a chemosensor to research the ability to recognize Cr³⁺ through fluorescence and UV titrations, HRMS, as well as ¹H NMR and IR spectroscopy. The results indicate that 3 is an effective chemosensor for Cr³⁺.

Rapid Discovery and Structure-Property Relationships of Metal-Ion Fluorescent Sensors via Macroarray Synthesis

A macroarray immobilisation of fluorophores on filter papers for sensing metal ions by in-situ reductive amination and carbodiimide coupling is reported herein. Chemometric approaches resulted in a rapid discovery of sensors that can synergistically discriminate up to 12 metal ions with great prediction accuracies. Covalently bound on paper, sensoring scaffolds that were synthesised from the macroarray format can readily be adopted as practical paper-based sensors with great reusability and sensitivity, achieving the limit of detection at low nanomolar level with some repeating spotting. Lastly, the discovered scaffolds were also confirmed to be functional as unbound molecules, thus paving the way for more diverse applications.

A Genetically Encoded, Ratiometric Fluorescent Biosensor for Hydrogen Sulfide

As an important gasotransmitter, hydrogen sulfide (H₂S) plays crucial roles in cell signaling. Incorporation of p-azidophenylalanine ( pAzF) into fluorescent proteins (FPs) via genetic code expansion has been a successful strategy in developing intensity-based, genetically encoded fluorescent biosensors for H₂S. To extend this strategy for ratiometric measurement which eliminates many detection uncertainties via self-calibration at two wavelengths, we modified the chromophore of a circularly permutated, superfolder green fluorescent protein (cpsGFP) with pAzF to derive cpsGFP- pAzF, which subsequently served as a Förster resonance energy transfer (FRET) acceptor to EBFP2, an enhanced blue fluorescent protein. The resultant construct, namely, hsFRET, is the first ratiometric, genetically encoded fluorescent biosensor for H₂S. Both in vitro and in mammalian cells, H₂S reduces the azido functional group of hsFRET to amine, leading to an increase of FRET from EBFP2 to cpsGFP. Our results collectively demonstrated that hsFRET could be used to selectively and ratiometrically monitor H₂S.

Golgi Apparatus Polarity Indicates Depression-Like Behaviors of Mice Using in Vivo Fluorescence Imaging

Depression is associated with decreased expression of brain-derived neurotrophic factor (BDNF) which assembled in Golgi apparatus. The changes might be closely related to variation in Golgi apparatus polarity. Thus, developing a nondestructive method to detect polarity in living cells and in vivo can facilitate accurate diagnosis and prognosis of depression. Herein, we created a new near-infrared Golgi-targetable fluorescent probe (Golgi-P) in which the merocyanine and benzoyl difluoroboronate moieties sense polarity changes. Golgi-P exhibited a decrease in fluorescence intensity and red-shift of maximum emission wavelength as the increase in polarity. Using Golgi-P, we discovered distinctly higher polarity in brains of mice with depression phenotype for the first time. Furthermore, our results disclosed that the elevation of polarity could due to the reduced synthesis of BDNF. Altogether, this study offers a new strategy for the accurate diagnosis of depression.

Superb-selective chemodosimetric signaling of sulfide in the absence and in the presence of CT-DNA and imaging in living cells by a plant alkaloid berberine analogue

New berberine analogue (BER-S), as a colorimetric probe in the absence of DNA and turn-on fluorometric probe in the presence of DNA towards S²⁻ detection is reported.

A new Schiff-base chemosensor for selective detection of Cu2+ and Co2+ and its copper complex for colorimetric sensing of S2- in aqueous solution

A new Schiff-base colorimetric chemosensor 1 was developed for the detection of Cu²⁺, Co²⁺ and S^2-. Sensor 1 could simply monitor Cu²⁺ and Co²⁺ by a color change from colorless to yellow. The binding modes of 1 to Cu²⁺ and Co²⁺ were determined to be a 2 : 1 complexation stoichiometry through Job's plot and ESI-mass spectrometry analysis. The detection limits (0.02 μM and 0.63 μM) for Cu²⁺ and Co²⁺ were lower than the recommended values (31.5 μM and 1.7 μM) by the World Health Organization (WHO) for Cu²⁺ and the Environmental Protection Agency (EPA) for Co²⁺, respectively. Importantly, 1 could detect and quantify Cu²⁺ in real water samples. In addition, the Cu²⁺-2·1 complex could be used as a highly selective colorimetric sensor for S^2- in the presence of other anions without any interference. Moreover, the sensing mechanisms of Cu²⁺ and Co²⁺ by 1 were explained by theoretical calculations.

Chemically reversible binding of H2S to a zinc porphyrin complex: towards implementation of a reversible sensor via a "coordinative-based approach"

Binding of hydrogen sulfide (H₂S) to a zinc porphyrin complex and the stabilization of the related zinc hydrosulfido adduct are explored. High-resolution MALDI Fourier transform ion cyclotron resonance mass spectrometry (HR MALDI-FT-ICR) and ¹H NMR experiments provide evidence that HS^- coordination occurs at the zinc centre. The coordination of HS^- occurs in a reversible manner and modulates fluorescence emission of a tetra(N-methylpyridyl)porphine zinc complex (TMPyPZn). The results highlight the potential of TMPyPZn and related systems for the implementation of fast and simple H₂S sensors via a coordinative-based approach.

Reaction-based ratiometric fluorescent probe for selective recognition of sulfide anions with a large Stokes shift through switching on ESIPT

Ratiometric fluorescent probe BNPT has been synthesized and characterized for S²⁻ sensing via ESIPT mechanism.

A dual response fluorescent sensor for HNO and S2−ions using a Cu(ii) complex based probe assisted by detailed DFT studies

A Cu(ii) based sensor for selective detection of HNO and S²⁻with detailed DFT studies is reported here.

Detection of sulfide ion and gaseous H2S using a series of pyridine-2,6-dicarboxamide based scaffolds

This work presents a series of pyridine-2,6-dicarboxamide based scaffolds with different appendages and their roles as chemosensors for the selective detection of S²⁻ ion, as well as gaseous H₂S, in primarily aqueous media.

Terbium (III) coordination polymer-copper (II) compound as fluorescent probe for time-resolved fluorescence 'turn-on' detection of hydrogen sulfide

With recognition of the biological importance of hydrogen sulfide (H₂ S), we present a simple and effective fluorescent probe for H₂ S using a Tb³⁺ coordination polymer-Cu²⁺ compound (DPA/Tb/G-Cu²⁺ ). Dipicolinic acid (DPA) and guanosine (G) can coordinate with Tb³⁺ to form a macromolecular coordination polymer (DPA/Tb/G). DPA/Tb/G specifically binds to Cu²⁺ in the presence of coexisting cations, and obvious fluorescence quenching is observed. The quenched fluorescence can be exclusively recovered upon the addition of sulfide, which is measured in the mode of time-resolved fluorescence. The fluorescence intensities of the DPA/Tb/G-Cu²⁺ compound enhance linearly with increasing sulfide concentrations from 1 to 30 μM. The detection limit for sulfide in aqueous solution is estimated to be 0.3 μM (at 3σ). The DPA/Tb/G-Cu²⁺ compound was successfully applied to sense H₂ S in human serum samples and exhibited a satisfactory result. It displays some desirable properties, such as fast detection procedure, high selectivity and excellent sensitivity. This method is very promising to be utilized for practical detection of H₂ S in biological and environmental samples.

Two intensified fluorescence colors' switching achieved by branched dye nanoaggregates

In this study, a variety of branched target dyes containing double internal proton transfer segments were synthesized. For comparison, some linear analogs including a single internal proton transfer part were synthesized. The corresponding reference molecules lacking proton transfer segments were also prepared. The properties and aggregation modes of these dye aggregates were investigated on the basis of scanning electron microscopy images, transmission electron microscopy images, dynamic light scattering, X-ray diffraction, UV/visible absorption spectra and fluorescence emission spectra. The results showed that molecular aggregates with the morphologies of nano-scaled rounded or cubic particles of the target branched dyes could be yielded in mixed organic solvent/H₂O solution. A remarkable emission enhancement and fluorescence switching process (from bright yellow to luminous pure blue) under 365 nm lamp irradiation was observed for these target branched dye nanoaggregates. However, no aggregates of the reference branched dyes free of hydroxyl groups were formed and no obvious spectral variations were found. In contrast, all the studied linear dyes yielded molecular nanoaggregates in mixed organic solvent/H₂O solution, and only intensified single normal blue fluorescence emission was presented. This study provided real examples of some branched organic dye aggregates which were capable of displaying naked-eye enhanced fluorescence color switching under an UV lamp.

Cyanine based Nanoprobes for Cancer Theranostics

Cyanine dyes are greatly accredited in the development of non-invasive therapy that can "see" and "treat" tumor cells via imaging, photothermal and photodynamic treatment. However, these dyes suffer from poor pharmacokinetics inducing severe toxicity to normal cells, insufficient accumulation in tumor regions and rapid photobleaching when delivered in free forms. Nanoparticles engineered to encapsulate these compounds and delivering them into tumor regions have increased rapidly, however, so far, these nanoparticles (NPs) have not proved to be so effective to circumvent existing challenges. Newly designed multifunctional smart nanocarriers that can improve phototherapeutic properties of these dyes, co-encapsulate multiple potent therapeutic compounds, and simultaneously overcome limitations related to tumor recurrence, metastases, limited intracellular uptake, and tumor hypoxia have potential to revolutionize modern paradigm of cancer therapy. Such cyanine based multifunctional nanocarriers integrating imaging and therapy in a single platform can effectively produce better clinical outcomes in cancer treatment. This review briefly summarizes recent advancements of cyanine nanoprobes that are currently used as imaging/phototherapeutic agents in unimodal/bimodal/trimodal cancer theranostics. Finally, we conclude this review by addressing challenges of pre-existing therapeutic systems and designs adopted to overcome them with a brief insight assimilating future perspective of emerging cyanine-based NPs in cancer theranostics.

Molecular characteristics of a fluorescent chemosensor for the recognition of ferric ion based on photoresponsive azobenzene derivative

Metal ion recognition is of great significance in biological and environmental detection. So far, there is very few research related to the ferric ion sensing based on photoresponsive azobenzene derivatives. In this work, we report a highly selective fluorescent "turn-off" sensor for Fe³⁺ ions and the molecular sensing characteristics based on an azobenzene derivative, N-(3,4,5-octanoxyphenyl)-N'-4-[(4-hydroxyphenyl)azophenyl]1,3,4-oxadiazole (AOB-t8). The binding association constant was determined to be 6.07×10³M^-1 in ethanol and the stoichiometry ratio of 2:2 was obtained from Job's plot and MS spectra. The AOB-t8 might be likely to form the dimer structure through the chelation of ferric ion with the azobenzene moiety. Meanwhile, it was found that the photoisomerization property of AOB-t8 was regulated by the binding with Fe³⁺. With the chelation of Fe³⁺, the regulated molecular rigidity and the perturbed of electronic state and molecular geometry was suggested to be responsible for the accelerated isomerization of AOB-t8 to UV irradiation and the increased fluorescence lifetime of both trans- and cis-AOB-t8-Fe(III). Moreover, the reversible sensing of AOB-t8 was successfully observed by releasing the iron ion from AOB-t8-Fe(III) with the addition of citric acid.

Fluorescent detection of multiple ions by two related chemosensors: structural elucidations and logic gate applications

Two related chemosensors L1 and L2 display selective detection of multiple ions (Cu²⁺, Al³⁺, Cd²⁺ and S²⁻) as a result of minor variation of functional groups at a remote arene ring.