Toxicity of CuO Nanoparticles to Yeast Saccharomyces cerevisiae BY4741 Wild-Type and Its Nine Isogenic Single-Gene Deletion Mutants

Nervous system exposure of different classes of nanoparticles: A review on potential toxicity and mechanistic studies

Nanoparticles (NPs) are generally defined as very small particles in the size range of 1-100 nm. Due to the rapid development of modern society, many new materials have been developed. The widespread use of NPs in medical applications, the food industry and the textile industry has led to an increase in NPs in the environment and the possibility of human contact, which poses a serious threat to human health. The nervous system plays a leading role in maintaining the integrity and unity of the body and maintaining a harmonious balance with the external environment. Therefore, based on two categories of organic and inorganic NPs, this paper systematically summarizes the toxic effects and mechanisms of NPs released into the nervous system. The results showed that exposure to NPs may damage the nervous system, decrease learning and cognitive ability, and affect embryonic development. Finally, a remediation scheme for NPs entering the body via the environment is also introduced. This scheme aims to reduce the neurotoxicity caused by NPs by supplementing NPs with a combination of antioxidant and anti-inflammatory compounds. The results provide a valuable reference for future research in this field.

Synthesis and synergistic antibacterial efficiency of chitosan-copper oxide nanocomposites

Copper and chitosan are used for biomedical applications due to their antimicrobial properties. In this study, a facile method for the synthesis of chitosan-copper oxide nanocomposites (nCuO-CSs) was modified, yielding stable colloidal nCuO-CSs suspensions. Using this method, nCuO-CSs with different copper-to-chitosan (50-190 kDa) weight ratios (1:0.3, 1:1, 1:3) were synthesized, their physicochemical properties characterized, and antibacterial efficacy assessed against Gram-negative Escherichia coli and Pseudomonas aeruginosa, and Gram-positive Staphylococcus aureus. The nCuO-CSs with a primary size of ∼10 nm and a ζ-potential of >+40 mV proved efficient antibacterials, acting at concentrations around 1 mg Cu/L. Notably, against Gram-negative bacteria, this inhibitory effect was already evident after a 1-h exposure and surpassed that of copper ions, implying to a synergistic effect of chitosan and nano-CuO. Indeed, using flow cytometry and confocal laser scanning microscopy, we showed that chitosan promoted interaction between the nCuO-CSs and bacterial cells, facilitating the shedding of copper ions in the close vicinity of the cell surface. The synergy between copper and chitosan makes these nanomaterials promising for biomedical applications (e.g., wound dressings).

Cadmium Sulfide Quantum Dots Adversely Affect Gametogenesis in Saccharomyces cerevisiae

In the last decades, nanotechnology-based tools have attracted attention in the scientific community, due to their potential applications in different areas from medicine to engineering, but several toxicological effects mediated by these advanced materials have been shown on the environment and human health. At present, the effects of engineered nanomaterials on gametogenesis have not yet been well understood. In the present study, we addressed this issue using the yeast Saccharomyces cerevisiae as a model eukaryote to evaluate the effects of cadmium sulfide quantum dots (CdS QDs) on sporulation, a process equivalent to gametogenesis in higher organisms. We have observed that CdS QDs cause a strong inhibition of spore development with the formation of aberrant, multinucleated cells. In line with these observations, treatment with CdS QDs down-regulates genes encoding crucial regulators of sporulation process, in particular, the transcription factor Ndt80 that coordinates different genes involved in progression through the meiosis and spore morphogenesis. Down-regulation of NDT80 mediated by CdS QDs causes a block of the meiotic cell cycle and a return to mitosis, leading to the formation of aberrant, multinucleated cells. These results indicate that CdS QDs inhibit gametogenesis in an irreversible manner, with adverse effects on cell-cycle progression.

The Toxicity of Polystyrene-Based Nanoparticles in Saccharomyces cerevisiae Is Associated with Nanoparticle Charge and Uptake Mechanism

Polystyrene latex (PSL) nanoparticles (NPs), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) liposomes, and hybrid NPs that have different concentrations, sizes, surface charges, and functional groups were used to determine their toxicity to Saccharomyces cerevisiae cells. The size, charge, and morphology of the nanoparticles were characterized by dynamic light scattering, electrophoretic light scattering, scanning transmission electron microscopy, and transmission electron microscopy analysis. The cell viabilities were determined by colony forming unit analysis and confocal laser scanning microscopy imaging. Uptake inhibition studies were performed to determine the internalization mechanism of PSL NPs. At 50 mg/L, both positively and negatively charged NPs were slightly toxic. With increasing concentration, however, full toxicities were observed with positively charged PSL NPs, while a marginal increase in toxicity was obtained with negatively charged PSL NPs. For negatively charged and carboxyl-functionalized NPs, an increase in size induced toxicity, whereas for positively charged and amine-functionalized NPs, smaller-sized NPs were more toxic to yeast cells. Negatively charged NPs were internalized by the yeast cells, but they showed toxicity when they entered the cell vacuole. Positively charged NPs, however, accumulated on the cell surface and caused toxicity. When coated with DOPC liposomes, positively charged NPs became significantly less toxic. We attribute this reduction to the larger-diameter and/or more-agglomerated NPs in the extracellular environment, which resulted in lower interactions with the cell. In addition to endocytosis, it is possible that the negatively charged NPs (30-C-n) were internalized by the cells, partly via direct permeation, which is preferred for high drug delivery efficiency. Negatively charged PSL NP exposure to the yeast cells at low-to-moderate concentrations resulted in low toxicities in the long term. Our results indicate that negatively charged PSL NPs provide safer alternatives as cargo carriers in drug delivery applications. Moreover, the variations in NP size, concentration, and exposure time, along with the use of hybrid systems, have significant roles in nanoparticle-based drug delivery applications in terms of their effects on living organisms.

Antibacterial Activity of Positively and Negatively Charged Hematite (α-Fe2O3) Nanoparticles to Escherichia coli, Staphylococcus aureus and Vibrio fischeri

In the current study, the antibacterial activity of positively and negatively charged spherical hematite (α-Fe2O3) nanoparticles (NPs) with primary size of 45 and 70 nm was evaluated against clinically relevant bacteria Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) as well as against naturally bioluminescent bacteria Vibrio fischeri (an ecotoxicological model organism). α-Fe2O3 NPs were synthesized using a simple green hydrothermal method and the surface charge was altered via citrate coating. To minimize the interference of testing environment with NP's physic-chemical properties, E. coli and S. aureus were exposed to NPs in deionized water for 30 min and 24 h, covering concentrations from 1 to 1000 mg/L. The growth inhibition was evaluated following the postexposure colony-forming ability of bacteria on toxicant-free agar plates. The positively charged α-Fe2O3 at concentrations from 100 mg/L upwards showed inhibitory activity towards E. coli already after 30 min of contact. Extending the exposure to 24 h caused total inhibition of growth at 100 mg/L. Bactericidal activity of positively charged hematite NPs against S. aureus was not observed up to 1000 mg/L. Differently from positively charged hematite NPs, negatively charged citrate-coated α-Fe2O3 NPs did not exhibit any antibacterial activity against E. coli and S. aureus even at 1000 mg/L. Confocal laser scanning microscopy and flow cytometer analysis showed that bacteria were more tightly associated with positively charged α-Fe2O3 NPs than with negatively charged citrate-coated α-Fe2O3 NPs. Moreover, the observed associations were more evident in the case of E. coli than S. aureus, being coherent with the toxicity results. Vibrio fischeri bioluminescence inhibition assays (exposure medium 2% NaCl) and colony forming ability on agar plates showed no (eco)toxicity of α-Fe2O3 (EC50 and MBC > 1000 mg/L).

Harmful effects of metal(loid) oxide nanoparticles

The incorporation of nanomaterials (NMs), including metal(loid) oxide (MOx) nanoparticles (NPs), in the most diversified consumer products, has grown enormously in recent decades. Consequently, the contact between humans and these materials increased, as well as their presence in the environment. This fact has raised concerns and uncertainties about the possible risks of NMs to human health and the adverse effects on the environment. These concerns underline the need and importance of assessing its nanosecurity. The present review focuses on the main mechanisms underlying the MOx NPs toxicity, illustrated with different biological models: release of toxic ions, cellular uptake of NPs, oxidative stress, shading effect on photosynthetic microorganisms, physical restrain and damage of cell wall. Additionally, the biological models used to evaluate the potential hazardous of nanomaterials are briefly presented, with particular emphasis on the yeast Saccharomyces cerevisiae, as an alternative model in nanotoxicology. An overview containing recent scientific advances on cellular responses (toxic symptoms exhibited by yeasts) resulting from the interaction with MOx NPs (inhibition of cell proliferation, cell wall damage, alteration of function and morphology of organelles, presence of oxidative stress bio-indicators, gene expression changes, genotoxicity and cell dead) is critically presented. The elucidation of the toxic modes of action of MOx NPs in yeast cells can be very useful in providing additional clues about the impact of NPs on the physiology and metabolism of the eukaryotic cell. Current and future trends of MOx NPs toxicity, regarding their possible impacts on the environment and human health, are discussed. KEY POINTS: • The potential hazardous effects of MOx NPs are critically reviewed. • An overview of the main mechanisms associated with MOx NPs toxicity is presented. • Scientific advances about yeast cell responses to MOx NPs are updated and discussed.

Metal Nanoparticles for Improving Bactericide Functionality of Usual Fibers

A wide variety of microbiological hazards stimulates a constant development of new protective materials against them. For that, the application of some nanomaterials seems to be very promising. Modification of usual fibers with different metal nanoparticles was successfully illustrated in the work. Tantal nanoparticles have shown the highest antibacterial potency within fibrous materials against both gram-positive (Bacillus subtilis) and gram-negative (Escherichia coli) bacteria. Besides, the effect of tantal nanoparticles towards luminescent Photobacterium phosphoreum cells estimating the general sample ecotoxicity was issued for the first time.

Hazard evaluation of polystyrene nanoplastic with nine bioassays did not show particle-specific acute toxicity

Plastic is a wide-spread pollutant and must be evaluated for potential adverse effects of its breakdown product, microplastic (≤5 mm) along with its subfraction, nanoplastic (1-100 nm). Risk assessment of pollutants cannot be conducted without their toxicity (dose-response) data. In this study, toxicity of polystyrene nanoplastics (PS-NPL) was evaluated using 8 acute and 1 subchronic toxicity assays with 10 organisms of different biological complexity (bacteria, yeast, algae, protozoans, mammalian cells in vitro, crustaceans, midge larvae). Commercial 26 and 100 nm carboxylated PS-NPL spheres were chosen as model and tested in nominal concentrations up to 100 mg/L (1.025·10¹⁶ 26 nm and 1.83·10¹⁴ 100 nm particles/L). In most of the assays, both PS-NPL proved non-toxic (L(E)C₅₀ > 100 mg/L) but three tests (V. fischeri, R. subcapitata, D. magna) flagged toxicity in 'as received' 26 nm PS-NPL and D. magna also in 100 nm PS-NPL (EC₅₀ ranging from 13 to 71 mg/L). As, according to manufacturers, both PS-NPL suspensions contained additives (surfactants and biocidal NaN₃), the three toxicity tests were repeated also on dialysed PS-NPL and on NaN_3. Non-toxicity of dialysed PS-NPL indicated that the toxicity of 'as-received' PS-NPL was not particle-specific but false positive due to water-soluble additives in the PS-NPL preparations. NaN₃ was very toxic to D. magna (48 h EC₅₀ = 0.05 ± 0.03 mg NaN₃/L), toxic to R. subcapitata (72 h EC₅₀ = 4.97 ± 3.7 mg NaN₃/L) and non-toxic to V. fischeri. Toxicity of 'as-received' PS-NPL was not fully explainable by NaN₃ but also attributable to other additives in the suspensions. Toxicity research of microplastic using commercial model particles must always consider the potential influence of additives, e.g. test the toxicity of dialysed NPL for comparison. In our study, D. magna, R. subcapitata and V. fischeri were the most sensitive to PS-NPL water-soluble additives and flagged their presence in NPL preparations.

Toxicological response of the model fungus Saccharomyces cerevisiae to different concentrations of commercial graphene nanoplatelets

Graphene nanomaterials have attracted a great interest during the last years for different applications, but their possible impact on different biological systems remains unclear. Here, an assessment to understand the toxicity of commercial polycarboxylate functionalized graphene nanoplatelets (GN) on the unicellular fungal model Saccharomyces cerevisiae was performed. While cell proliferation was not negatively affected even in the presence of 800 mg L-1 of the nanomaterial for 24 hours, oxidative stress was induced at a lower concentration (160 mg L-1), after short exposure periods (2 and 4 hours). No DNA damage was observed under a comet assay analysis under the studied conditions. In addition, to pinpoint the molecular mechanisms behind the early oxidative damage induced by GN and to identify possible toxicity pathways, the transcriptome of S. cerevisiae exposed to 160 and 800 mg L-1 of GN was studied. Both GN concentrations induced expression changes in a common group of genes (337), many of them related to the fungal response to reduce the nanoparticles toxicity and to maintain cell homeostasis. Also, a high number of genes were only differentially expressed in the GN800 condition (3254), indicating that high GN concentrations can induce severe changes in the physiological state of the yeast.

Comparison of the Wild-Type Obligate Methylotrophic Bacterium Methylophilus quaylei and its Isogenic Streptomycin-Resistant Mutant via Metal Nanoparticle Generation

Metal nanoparticles synthesized by green methods with the use of microorganisms are currently one of the most closely studied types of nanomaterials. It has accurately been shown that the characteristics of metal nanoparticles generated in the presence of different bacteria vary. For the two isogenic strains of obligate methylotrophic bacteria of the wild type (M. quaylei MT^T) and its streptomycin-resistant mutant (M. quaylei SM^R), the pleiotropic character of streptomycin resistance mutation in the SM^R cells has been revealed. It has been shown that both cultures can generate silver nanoparticles. There is a dramatic difference in the formation of palladium nanoparticles, which are formed only in the presence of cells of the streptomycin-resistant mutant M. quaylei SM^R. This study shows that closely related isogenic strains of obligate methylotrophic bacteria can be distinguished by the spectra of biogenic nanoparticles of two noble metals. While palladium nanoparticles are only generated by the cells of the streptomycin-resistant mutant M. quaylei SM^R, biogenic silver nanoparticles can be generated from both cultures. Thus, the assessment of the ability of microorganisms to form biogenic nanoparticles of different metals allows the revelation of subtle metabolic differences of even close cultures.

Copper oxide nanoparticles as an effective anti-biofilm agent against a copper tolerant marine bacterium, Staphylococcus lentus

Biofilm formation on antifouling coatings is a serious concern in seawater cooling systems and the maritime industry. A prolific biofilm forming strain (Staphylococcus lentus), possessing high tolerance (>1,000 µg ml^-1) to dissolved copper ions (Cu⁺⁺) was isolated from titanium coupons exposed in the coastal waters of Kalpakkam, east coast of India. S. lentus formed increased biofilm (p < 0.05) at 100 µg ml^-1 of Cu⁺⁺ ions, when compared with the untreated control. To combat biofilm formation of this strain, the efficacy of copper oxide nanoparticles synthesized from copper nitrate by varying the concentrations of hexamine and cetyl trimethyl ammonium bromide (CTAB), was investigated. Complete (100%) inhibition of biofilm formation was observed with plain CuO NP (0.5 M hexamine, uncapped) at 1,000 µg ml^-1. Capping with CTAB, influenced the morphology and the purity of the synthesized CuO NPs but did not alter their surface charge. Capping reduced metal ion release from CuO NPs and their antibacterial and anti-biofilm property against S. lentus. Overall, uncapped CuO NPs were effective in controlling biofilm formation of S. lentus. Concurrent release of copper ions and contact mediated physical damage by CuO NPs offer a promising approach to tackle metal tolerant biofilm bacteria.

Toxicity of differently sized and charged silver nanoparticles to yeast Saccharomyces cerevisiae BY4741: a nano-biointeraction perspective

In the current study, we evaluated the modulatory effects of size and surface coating/charge of AgNPs on their toxicity to a unicellular yeast Saccharomyces cerevisiae BY4741 - a fungal model. For that, the toxicity of a set of 10 and 80 nm citrate-coated (negatively charged) and branched polyethylenimine (bPEI) coated (positively charged) AgNPs was evaluated in parallel with AgNO₃ as ionic control. Yeast cells were exposed to different concentrations of studied compounds in deionized water for 24 h at 30 °C and evaluated for the viability by the post-exposure colony-forming ability. Particle-cell interactions were assessed by SEM, TEM and confocal laser scanning microscopy (CLSM) in the reflection mode. AgNPs toxicity to yeast was size and charge-dependent: 24-h IC₅₀ values ranged from 0.04 (10nAg-bPEI) up to 8.3 mg Ag/L (80nAg-Cit). 10 nm AgNPs were 5-27 times more toxic than 80 nm AgNPs and bPEI-AgNPs 8-44 times more toxic than citrate-AgNPs. SEM and TEM visualization showed that bPEI-AgNPs but not citrate-AgNPs adsorbed onto the yeast cell's surface. However, according to CLSM all the studied AgNPs, whatever the size and coating, ended up within the yeast cell. Toxicity of citrate-AgNPs was largely explained by the dissolved Ag ions but the bPEI-AgNPs showed mainly particle-driven effects leading to the cellular internalization and/or to more pronounced dissolution of AgNPs in the close vicinity of the cell wall. Therefore, the size, and especially the coating/charge of AgNPs can be efficiently used for the design of new more efficient antifungals.

Biochemical CuSO4 Toxicity in Drosophila melanogaster Depends on Sex and Developmental Stage of Exposure

Copper is a transition metal that exists in different chemical forms (e.g., Cu²⁺,Cu⁺, and Cu⁰) and at high concentrations it is toxic. Here, we investigated the Cu²⁺-induced toxicity in Drosophila melanogaster, evaluating the survival, locomotion, and the activity of acetylcholinesterase (AChE) and glutathione S-transferase (GST) enzymes. Flies were exposed to Cu²⁺(0.1-1 mmol CuSO₄/kg of diet or approximately 0.1-1 mM Cu²⁺) and allowed to mate during 24 h. GST and AChE enzymes were evaluated in the larvae and in the head and the body (thorax + abdomen) of the adult male and females flies. The total number of adult females (0.4-1 mM) and males (0.75 and 1 mM) was decreased by CuSO₄. The climbing ability was hampered in flies exposed to 1 mM Cu²⁺. In larvae, Cu²⁺(0.4-1 mM) increased AChE activity (P < 0.002). In males' heads, 0.4 mM Cu²⁺ increased the AChE activity (P < 0.01). In adults' bodies, Cu²⁺inhibited the activity in both sexes, but with greater effectiveness in males (0.1 to 1 mM) than in females (1 mM). Regarding GST activity, 0.1 mM Cu²⁺increased, but 1 mM decrease GST in larvae. In the head of flies, Cu²⁺decreased the GST activity at intermediate (0.4 mM) and increased GST at the highest concentration (1 mM) in males. In the bodies, the effect of Cu²⁺was similar. In conclusion, Cu²⁺exposure in D. melanogaster disrupted locomotion and enzymatic parameters that can be related to changes in AChE and in the detoxifying GST enzyme.

In Vivo-In Vitro Comparative Toxicology of Cadmium Sulphide Quantum Dots in the Model Organism Saccharomyces cerevisiae

The aim of this work was to use the yeast Saccharomyces cerevisiae as a tool for toxicogenomic studies of Engineered Nanomaterials (ENMs) risk assessment, in particular focusing on cadmium based quantum dots (CdS QDs). This model has been exploited for its peculiar features: a short replication time, growth on both fermentable and oxidizable carbon sources, and for the contextual availability of genome wide information in the form of genetic maps, DNA microarray, and collections of barcoded mutants. The comparison of the whole genome analysis with the microarray experiments (99.9% coverage) and with the phenotypic analysis of 4688 barcoded haploid mutants (80.2% coverage), shed light on the genes involved in the response to CdS QDs, both in vivo and in vitro. The results have clarified the mechanisms involved in the exposure to CdS QDs, and whether these ENMs and Cd²⁺ exploited different pathways of response, in particular related to oxidative stress and to the maintenance of mitochondrial integrity and function. Saccharomyces cerevisiae remains a versatile and robust alternative for organismal toxicological studies, with a high level of heuristic insights into the toxicology of more complex eukaryotes, including mammals.

Zinc oxide nanoparticles induce toxicity by affecting cell wall integrity pathway, mitochondrial function and lipid homeostasis in Saccharomyces cerevisiae

Growing numbers of nanotoxicity research demonstrating that mechanical damage and oxidative stress are potential modes of nanoparticles (NPs) induced toxicity. However, the underlying mechanisms by which NPs interact with the eukaryotic cell and affect their physiological and metabolic functions are not fully known. We investigated the toxic effects of zinc oxide nanoparticles (ZnO-NPs) on budding yeast, Saccharomyces cerevisiae and elucidated the underlying mechanism. We observed cell wall damage and accumulation of reactive oxygen species (ROS) leading to cell death upon ZnO-NPs exposure. We detected a significant change in the cellular distribution of lipid biosynthetic enzymes (Fas1 and Fas2). Furthermore, exposure of ZnO-NPs altered the architecture of endoplasmic reticulum (ER) and mitochondria as well as ER-mitochondria encounter structure (ERMES) complex causing cellular toxicity due to lipid disequilibrium and proteostasis. We also observed significant changes in heat shock and unfolded protein responses, monitored by Hsp104-GFP localization and cytosolic Hac1 splicing respectively. Moreover, we observed activation of MAP kinases of CWI (Mpk1) and HOG (Hog1) pathways upon exposure to ZnO-NPs. Transcript level analyses showed induction of chitin synthesis and redox homeostasis genes. Finally, we observed induction in lipid droplets (LDs) formation, distorted vacuolar morphology and induction of autophagy as monitored by localization of Atg8p. However, we did not observe any significant change in epigenetic marks, examined by western blotting. Altogether, we provide evidence that exposure of ZnO-NPs results in cell death by affecting cell wall integrity and ER homeostasis as well as accumulation of ROS and saturated free fatty acids.

Zinc Oxide Nanoparticle as a Novel Class of Antifungal Agents: Current Advances and Future Perspectives

Certain types of nanoparticles, especially zinc oxide nanoparticles (ZnONPs), are widely reported to be capable of the inhibition of harmful bacteria, yeasts, and filamentous fungi. The unique physicochemical and biological properties of ZnONPs also make them attractive to the food industry for use as a promising antifungal agent. This Review thoroughly introduces the preparation methods and antifungal properties of ZnONPs and analyzes their possible antifungal mechanisms. The applicability of ZnONPs in food packaging and nutritional supplements and as an antimicrobial additive is also documented. Moreover, evaluations for biological safety of ZnONPs are objectively reviewed in this paper. The discussions addressed in this Review not only have theoretical significance but also are conducive to the development of food safety, nutrition, and human health. The summarized knowledge and future perspectives outlined here are expected to promote and guide new research toward developing and optimizing the application of ZnONPs as a novel class of antifungal agents to help improve food quality as well as food safety in the near future.

Investigation the cytotoxicity and photo-induced toxicity of carbon dot on yeast cell

Carbon dots (CDs) as a new fluorescent material with excellent water solubility, chemical inertness, and easy surface modification are a good candidate for bioimaging and biosensing due to their low toxicity and good biocompatibility. Although carbon is not an intrinsically toxic substance, carbon nanomaterials such as CDs may cause risks to human health and the potentially hazardous effects of CDs on various living systems must be completely determined. So far, cytotoxicity studies of CDs have focused on human cells and are mainly conducted on limited cell lines. In the present study, toxicity assessment of CDs was evaluated on yeast cells Pichia pastoris as a unicellular eukaryotic model. Results revealed dose-dependent toxicity of CDs on yeast cells and less relative cell growth in 25 mg/ml of CDs as compared to the control group. CDs binding curve confirmed the interaction between CDs and surface of yeast cells. SEM images showed that the CDs caused cell shrinkage and hole formation on the surface of yeast cells and also induced slightly cell deformation. It was demonstrated that CDs could generate the ROS dose-dependently. Finally, results showed the growth inhibition and ROS generation effects of CDs were enhanced at light exposure, as an important environmental factor. These findings could have important implications for applications of CDs.

Nickel oxide (NiO) nanoparticles disturb physiology and induce cell death in the yeast Saccharomyces cerevisiae

The increasing use of nanoparticles (NPs) has spurred concerns about their toxic effects. This work aimed to assess the potential hazards of nickel oxide (NiO) NPs using the yeast Saccharomyces cerevisiae as a cell model. Yeast cells exposed for 6 h to 100 mg/L NiO NPs presented reduced metabolic activity (esterase activity and FUN-1 dye processing) and enhanced accumulation of reactive oxygen species. NiO NPs induced the loss of cell viability in a dose-dependent manner. Study of the dissolution of NiO NPs in aqueous media, together with the toxicological data, suggests that the nickel released by the NPs cannot explain all the toxic effects observed in S. cerevisiae caused by the NPs. Transmission electron microscopy observations revealed that NiO NPs were adsorbed onto cell surface but did not enter into yeast cells. Isogenic mutants (cwp1∆ and cwp2∆) with increased cell wall porosity did not display enhanced susceptibility to NiO NPs compared to the wild type strain. Our results suggest that NiO NPs exert their toxic effect by an indirect mechanism. This work contributes to knowledge of the potential hazards of NiO NPs and to the elucidation of their mechanisms of toxic action.

Combined systems of different antibiotics with nano-CuO against Escherichia coli and the mechanisms involved

Aim: The combined efficacy of CuO nanoparticles (NPs) with 22 kinds of antibiotics against Escherichia coli was systematic studied, and CuO with cephalexin synergistic system was screened out. Methods: Antimicrobial susceptibility test included disk diffusion test, checkerboard method and time-kill assay. The interactions of CuO NPs and antibiotics were analyzed by x-ray photoelectron spectroscopy, Fourier transform infrared spectra and Zeta. The interactions between bacteria and antibacterial agents were studied by surface plasmon resonance sensor for the first time. Results & Conclusion: Synergistic effect (1+1>2) was observed when CuO NPs combined with cephalexin against E. coli. The concentrated cephalexin molecules interacted more strongly with the E. coli cells to make cell wall become loose. Then, CuO NPs were more easily to damage and penetrate cells. Besides, the presence of antibiotics did not enhance Cu2+ release, Cu2+ uptake and reactive oxygen species generation. But the presence of cephalexin greatly enhanced cell permeability in comparison to others.

Label-free and dynamic monitoring of cytotoxicity to the blood-brain barrier cells treated with nanometre copper oxide

A cytotoxicity study was conducted with a primary culture of the nervous system cells, including brain microvascular endothelial cells (BMECs) and astrocytes, which are important components of the blood-brain barrier. The real-time cell analysis (RTCA) was used to determine the cytotoxicity of copper-oxide nanoparticles (CuO NPs). The IC50 values of CuO NPs in astrocytes and BMECs were determined by the RTCA at different exposure times and were used as base values for further research. DNA damage after exposure to CuO NPs for 3 and 24 h was assessed using comet assay at the IC50 obtained from RTCA. The onset time of cytotoxicity induced by CuO NPs was 2 and 2-4 h post-exposure in BMECs and astrocytes, respectively. Furthermore, the degree of cytotoxicity induced by exposure to CuO NPs for 24-48 h in the BMECs and astrocytes was similar. Treatment with CuO NPs at 1/2*IC50 and 1/5*IC50 for 3 h induced genotoxicity in both cells as assessed by a measurement of DNA damage, although no cytotoxicity was observed. However, significant DNA damage was observed at all concentrations of CuO NPs used in this study, when the treatment time was 24 h.

Nanomaterial libraries and model organisms for rapid high-content analysis of nanosafety

Safety analysis of engineered nanomaterials (ENMs) presents a formidable challenge regarding environmental health and safety, due to their complicated and diverse physicochemical properties. Although large amounts of data have been published regarding the potential hazards of these materials, we still lack a comprehensive strategy for their safety assessment, which generates a huge workload in decision-making. Thus, an integrated approach is urgently required by government, industry, academia and all others who deal with the safe implementation of nanomaterials on their way to the marketplace. The rapid emergence and sheer number of new nanomaterials with novel properties demands rapid and high-content screening (HCS), which could be performed on multiple materials to assess their safety and generate large data sets for integrated decision-making. With this approach, we have to consider reducing and replacing the commonly used rodent models, which are expensive, time-consuming, and not amenable to high-throughput screening and analysis. In this review, we present a ‘Library Integration Approach’ for high-content safety analysis relevant to the ENMs. We propose the integration of compositional and property-based ENM libraries for HCS of cells and biologically relevant organisms to be screened for mechanistic biomarkers that can be used to generate data for HCS and decision analysis. This systematic approach integrates the use of material and biological libraries, automated HCS and high-content data analysis to provide predictions about the environmental impact of large numbers of ENMs in various categories. This integrated approach also allows the safer design of ENMs, which is relevant to the implementation of nanotechnology solutions in the pharmaceutical industry.

Salinity-Based Toxicity of CuO Nanoparticles, CuO-Bulk and Cu Ion to Vibrio anguillarum

Bacteria are used in ecotoxicology for their important role in marine ecosystems and their quick, reproducible responses. Here we applied a recently proposed method to assess the ecotoxicity of nanomaterials on the ubiquitous marine bacterium Vibrio anguillarum, as representative of brackish and marine ecosystems. The test allows the determination of 6-h EC₅₀ in a wide range of salinity, by assessing the reduction of bacteria actively replicating and forming colonies. The toxicity of copper oxide nanoparticles (CuO NPs) at different salinities (5-20-35 ‰) was evaluated. CuSO₄ 5H₂O and CuO bulk were used as reference toxicants (solubility and size control, respectively). Aggregation and stability of CuO NP in final testing dispersions were characterized; Cu²⁺ dissolution and the physical interactions between Vibrio and CuO NPs were also investigated. All the chemical forms of copper showed a clear dose-response relationship, although their toxicity was different. The order of decreasing toxicity was: CuSO₄ 5H₂O > CuO NP > CuO bulk. As expected, the size of CuO NP aggregates increased with salinity and, concurrently, their toxicity decreased. Results confirmed the intrinsic toxicity of CuO NPs, showing modest Cu²⁺ dissolution and no evidence of CuO NP internalization or induction of bacterial morphological alterations. This study showed the V. anguillarum bioassay as an effective tool for the risk assessment of nanomaterials in marine and brackish environments.

Functional genomic assessment of 2, 2-bis (bromomethyl)-1, 3-propanediol induced cytotoxicity in a single-gene knockout library of E. coli

Functional gene fingerprinting of chemicals could be used to understand the direct gene-chemical interaction in the process of toxification from a genome-wide scale. 2, 2-bis (bromomethyl)-1, 3-propanediol (BMP) is a brominated flame retardant with widespread production but with very limited toxicological data. Here the cytotoxicity of BMP was assessed by Escherichia coli (E. coli) functional genome-wide knockout mutants screening and the underlying molecular mechanism was investigated. The median inhibition concentration (IC50) of BMP was 1.608 ± 0.078 mg/ml after 24 h exposure. 119 initial, including 66 sensitive and 53 resistant single gene mutants, were identified by a full library screening of BMP at the concentration of IC50. The resistant genes were significantly enriched in nucleobase-containing compound biosynthetic process (GO: 0034654) by gene ontology (GO) biological process analyses, which suggested that the pathway of DNA repair is a critical cellular process in the survival of cells exposed to BMP. Meanwhile, function annotation of all BMP responsive genes suggested the mechanism of BMP was associated with DNA damage, oxidative stress and cellular transmembrane transport process. Many genes were exclusively responsive to BMP comparing with other chemicals that has been assessed by E. coli mutant screening approach, which indicated that BMP has a distinct mode of toxic action. Overall, the functional genomic screening approach presented here provides a great tool to assess the cellular toxicological mechanism of environmental chemicals.

Toxicity Effects of Functionalized Quantum Dots, Gold and Polystyrene Nanoparticles on Target Aquatic Biological Models: A Review

Nano-based products are widespread in several sectors, including textiles, medical-products, cosmetics, paints and plastics. Nanosafety and safe-by-design are driving nanoparticle (NP) production and applications through NP functionalization (@NPs). Indeed, @NPs frequently present biological effects that differ from the parent material. This paper reviews the impact of quantum dots (QDs), gold nanoparticles (AuNPs), and polystyrene-cored NPs (PSNPs), evidencing the role of NP functionalization in toxicity definition. Key biological models were taken into consideration for NP evaluation: Saccharomyces cerevisiae, fresh- (F) and saltwater (S) microalgae (Raphidocelis subcapitata (F), Scenedesmus obliquus (F) and Chlorella spp. (F), and Phaeodactylum tricornutum (S)), Daphnia magna, and Xenopus laevis. QDs are quite widespread in technological devices, and they are known to induce genotoxicity and oxidative stress that can drastically change according to the coating employed. For example, AuNPs are frequently functionalized with antimicrobial peptides, which is shown to both increase their activity and decrease the relative environmental toxicity. P-NPs are frequently coated with NH₂⁻ for cationic and COOH⁻ for anionic surfaces, but when positively charged toxicity effects can be observed. Careful assessment of functionalized and non-functionalized NPs is compulsory to also understand their potential direct and indirect effects when the coating is removed or degraded.

Ecotoxicological Method with Marine Bacteria Vibrio anguillarum to Evaluate the Acute Toxicity of Environmental Contaminants

Bacteria are an important component of the ecosystem, and microbial community alterations can have a significant effect on biogeochemical cycling and food webs. Toxicity testing based on microorganisms are widely used because they are relatively quick, reproducible, cheap, and are not associated with ethical issues. Here, we describe an ecotoxicological method to evaluate the biological response of the marine bacterium Vibrio anguillarum. This method assesses the acute toxicity of chemical compounds, including new contaminants such as nanoparticles, as well as environmental samples. The endpoint is the reduction of bacterial culturability (i.e., the capability to replicate and form colonies) due to exposure to a toxicant. This reduction can be generally referred to as mortality. The test allows for the determination of the LC₅₀, the concentration that causes a 50% decrease of bacteria actively replicating and forming colonies, after a 6 h exposure. The culturable bacteria are counted in terms of colony forming units (CFU), and the "mortality" is evaluated and compared to the control. In this work, the toxicity of copper sulphate (CuSO₄) was evaluated. A clear dose-response relationship was observed, with a mean LC₅₀ of 1.13 mg/L, after three independent tests. This protocol, compared to existing methods with microorganisms, is applicable in a wider range of salinity and has no limitations for colored/turbid samples. It uses saline solution as the exposure medium, avoiding any possible interferences of growth medium with the investigated contaminants. The LC₅₀ calculation facilitates comparisons with other bioassays commonly applied to ecotoxicological assessments of the marine environment.

3D map distribution of metallic nanoparticles in whole cells using MeV ion microscopy

In this work, a new tool was developed, the MORIA program that readily translates Rutherford backscattering spectrometry (RBS) output data into visual information, creating a display of the distribution of elements in a true three-dimensional (3D) environment. The program methodology is illustrated with the analysis of yeast Saccharomyces cerevisiae cells, exposed to copper oxide nanoparticles (CuO-NP) and HeLa cells in the presence of gold nanoparticles (Au-NP), using different beam species, energies and nuclear microscopy systems. Results demonstrate that for both cell types, the NP internalization can be clearly perceived. The 3D models of the distribution of CuO-NP in S. cerevisiae cells indicate the nonuniform distribution of NP in the cellular environment and a relevant confinement of CuO-NP to the cell wall. This suggests the impenetrability of certain cellular organelles or compartments for NP. By contrast, using a high-resolution ion beam system, discretized agglomerates of Au-NP were visualized inside the HeLa cell. This is consistent with the mechanism of entry of these NPs in the cellular space by endocytosis enclosed in endosomal vesicles. This approach shows RBS to be a powerful imaging technique assigning to nuclear microscopy unparalleled potential to assess nanoparticle distribution inside the cellular volume.

Mn3O4nanoparticles cause endoplasmic reticulum stress-dependent toxicity to Saccharomyces cerevisiae

Model figure illustrating the toxicity mechanism of Mn₃O₄NPs to yeast cells.

Copper Oxide Nanoparticles Impact Several Toxicological Endpoints and Cause Neurodegeneration in Caenorhabditis elegans

Engineered nanoparticles are becoming increasingly incorporated into technology and consumer products. In 2014, over 300 tons of copper oxide nanoparticles were manufactured in the United States. The increased production of nanoparticles raises concerns regarding the potential introduction into the environment or human exposure. Copper oxide nanoparticles commonly release copper ions into solutions, which contribute to their toxicity. We quantified the inhibitory effects of both copper oxide nanoparticles and copper sulfate on C. elegans toxicological endpoints to elucidate their biological effects. Several toxicological endpoints were analyzed in C. elegans, including nematode reproduction, feeding behavior, and average body length. We examined three wild C. elegans isolates together with the Bristol N2 laboratory strain to explore the influence of different genotypic backgrounds on the physiological response to copper challenge. All strains exhibited greater sensitivity to copper oxide nanoparticles compared to copper sulfate, as indicated by reduction of average body length and feeding behavior. Reproduction was significantly reduced only at the highest copper dose, though still more pronounced with copper oxide nanoparticles compared to copper sulfate treatment. Furthermore, we investigated the effects of copper oxide nanoparticles and copper sulfate on neurons, cells with known vulnerability to heavy metal toxicity. Degeneration of dopaminergic neurons was observed in up to 10% of the population after copper oxide nanoparticle exposure. Additionally, mutants in the divalent-metal transporters, smf-1 or smf-2, showed increased tolerance to copper exposure, implicating both transporters in copper-induced neurodegeneration. These results highlight the complex nature of CuO nanoparticle toxicity, in which a nanoparticle-specific effect was observed in some traits (average body length, feeding behavior) and a copper ion specific effect was observed for other traits (neurodegeneration, response to stress).

The neglected nano-specific toxicity of ZnO nanoparticles in the yeast Saccharomyces cerevisiae

Nanoparticles (NPs) with unique physicochemical properties induce nano-specific (excess) toxicity in organisms compared with their bulk counterparts. Evaluation and consideration of nano-specific toxicity are meaningful for the safe design and environmental risk assessment of NPs. However, ZnO NPs have been reported to lack excess toxicity for diverse organisms. In the present study, the nano-specific toxicity of ZnO NPs was evaluated in the yeast Saccharomyces cerevisiae. Nano-specific toxicity of ZnO NPs was not observed in the wild type yeast. However, the ZnO NPs induced very similar nano-specific toxicities in the three mutants with comparable log Te ((particle)) values (0.64 vs 0.65 vs 0.62), suggesting that the mutants were more sensitive and specific for the NPs' nano-specific toxicity. The toxic effects in the yeast were slightly attributable to dissolved zinc ions from the ZnO (nano or bulk) particles. Oxidative damage and mechanical damage contributed to the toxic effect of the ZnO particles. The mechanism of mechanical damage is proposed to be an inherent characteristic underlying the nano-specific toxicity in the mutants. The log Te ((particle)) was a useful parameter for evaluation of NPs nano-specific toxicity, whereas log Te ((ion)) efficiently determined the NPs toxicity associated with released ions.

EU Regulation of Nanobiocides: Challenges in Implementing the Biocidal Product Regulation (BPR)

The Biocidal Products Regulation (BPR) contains several provisions for nanomaterials (NMs) and is the first regulation in the European Union to require specific testing and risk assessment for the NM form of a biocidal substance as a part of the information requirements. Ecotoxicological data are one of the pillars of the information requirements in the BPR, but there are currently no standard test guidelines for the ecotoxicity testing of NMs. The overall objective of this work was to investigate the implications of the introduction of nano-specific testing requirements in the BPR and to explore how these might be fulfilled in the case of copper oxide nanoparticles. While there is information and data available in the open literature that could be used to fulfill the BPR information requirements, most of the studies do not take the Organisation for Economic Co-operation and Development's nanospecific test guidelines into consideration. This makes it difficult for companies as well as regulators to fulfill the BPR information requirements for nanomaterials. In order to enable a nanospecific risk assessment, best practices need to be developed regarding stock suspension preparation and characterization, exposure suspensions preparation, and for conducting ecotoxicological test.

Towards a Definition of Harmless Nanoparticles from an Environmental and Safety Perspective

The rapid development of nanoparticles (NPs), such as silicon nanoparticles (Si NPs) and ferric oxide nanoparticles (Fe2O3NPs), and their use in myriad commercial applications have raised questions of their potential impacts on wastewater treatment systems. In this study, we investigated the consequences of the presence of Si NPs and Fe2O3NPs in the denitrification of anoxic sludge. Fe2O3NPs, at a concentration up to 50 mg/L, had no significant impact on nitrate removal, whereas Si NPs, at concentrations up to 50 mg/L, increased the rate of nitrate removal. We used transmission electron microscopy (TEM) to investigate the effect of Si NPs and Fe2O3NPs. Si NPs exposure enhanced the abundance ofnarG-1 gene, which might promote nitrate removal process directly. Finally, we reviewed and identified the specific properties of a variety of NPs responsible for toxicity and found NPs larger than about 100 nm and without ion release in general possible to energy safety and nontoxic or low toxic to environment. Our results provide useful information to understand the response of anoxic sludge to Si NPs and Fe2O3NPs in complex environmental matrix as well as potent support for wide use of the environmentally friendly NPs.

Interactive effects of copper oxide nanoparticles and light to green alga Chlamydomonas reinhardtii

The present study explores the effect of light with different spectral composition on the stability of CuO-nanoparticle (CuO-NP) dispersions and their effects to green alga Chlamydomonas reinhardtii. The results showed that simulated natural light (SNL) and light with enhanced UVB radiation (UVR*) do not affect the dissolution of CuO-NPs as compared to light irradiation conditions typically used in laboratory incubator (INC). Comparable values of ζ-potential and hydrodynamic size during 24h were found under all studied conditions. Concentrations of CuO-NPs below 1mgL(-1) do not attenuate the light penetration in the algal suspensions in comparison with NP-free system. Exposure to a combination of 8μgL(-1) or 0.8mgL(-1) CuO-NPs and INC or SNL has no significant effect on the algal growth inhibition, algal fluorescence and membrane integrity under short-term exposure. However, an enhancement of the percentage of cells experiencing oxidative stress was observed upon exposure to 0.8mgL(-1) CuO-NPs and SNL for 4 and 8h. Combination of UVR* and 0.8mgL(-1) CuO-NPs resulted in synergistic effects for all biological endpoints. Despite the photocatalytic properties of CuO-NPs no significant increase in abiotic reactive oxygen species (ROS) production under simulated solar radiation was observed suggesting that the synergistic effect observed might be correlated to other factors than CuO-NP-mediated ROS photoproduction. Tests performed with CuSO4 confirmed the important role of dissolution as toxicity driving force for lower CuO-NP concentration. However, they failed to clarify the contribution of dissolved Cu on the combined effects at 0.8mgL(-1) CuO-NPs. The results point out the necessity of taking into account the possible interactions between ENPs and changing light conditions when evaluating the potential effects of ENPs to phytoplankton in natural waters.

Copper oxide nanoparticles inhibit the metabolic activity of Saccharomyces cerevisiae

Copper oxide nanoparticles (CuO NPs) are used increasingly in industrial applications and consumer products and thus may pose risk to human and environmental health. The interaction of CuO NPs with complex media and the impact on cell metabolism when exposed to sublethal concentrations are largely unknown. In the present study, the short-term effects of 2 different sized manufactured CuO NPs on metabolic activity of Saccharomyces cerevisiae were studied. The role of released Cu(2+) during dissolution of NPs in the growth media and the CuO nanostructure were considered. Characterization showed that the 28 nm and 64 nm CuO NPs used in the present study have different primary diameter, similar hydrodynamic diameter, and significantly different concentrations of dissolved Cu(2+) ions in the growth media released from the same initial NP mass. Exposures to CuO NPs or the released Cu(2+) fraction, at doses that do not have impact on cell viability, showed significant inhibition on S. cerevisiae cellular metabolic activity. A greater CuO NP effect on the metabolic activity of S. cerevisiae growth under respiring conditions was observed. Under the tested conditions the observed metabolic inhibition from the NPs was not explained fully by the released Cu ions from the dissolving NPs.

Manufactured nanoparticles in the aquatic environment-biochemical responses on freshwater organisms: A critical overview

The enormous investments in nanotechnology have led to an exponential increase of new manufactured nano-enabled materials whose impact in the aquatic systems is still largely unknown. Ecotoxicity and nanosafety studies mostly resulted in contradictory results and generally failed to clearly identify biological patterns that could be related specifically to nanotoxicity. Generation of reactive oxygen species (ROS) is one of the most discussed nanotoxicity mechanism in literature. ROS can induce oxidative stress (OS), resulting in cyto- and genotoxicity. The ROS overproduction can trigger the induction of anti-oxidant enzymes such as catalase (CAT), superoxide dismutase (SOD) and glutathione peroxidases (GPx), which are used as biomarkers of response. A critical overview of the biochemical responses induced by the presence of NPs on freshwater organisms is performed with a strong interest on indicators of ROS and general stress. A special focus will be given to the NPs transformations, including aggregation, and dissolution, in the exposure media and the produced biochemical endpoints.

Assessment of the toxicity of CuO nanoparticles by using Saccharomyces cerevisiae mutants with multiple genes deleted

To develop applicable and susceptible models to evaluate the toxicity of nanoparticles, the antimicrobial effects of CuO nanoparticles (CuO-NPs) on various Saccharomyces cerevisiae (S. cerevisiae) strains (wild type, single-gene-deleted mutants, and multiple-gene-deleted mutants) were determined and compared. Further experiments were also conducted to analyze the mechanisms associated with toxicity using copper salt, bulk CuO (bCuO), carbon-shelled copper nanoparticles (C/Cu-NPs), and carbon nanoparticles (C-NPs) for comparisons. The results indicated that the growth inhibition rates of CuO-NPs for the wild-type and the single-gene-deleted strains were comparable, while for the multiple-gene deletion mutant, significantly higher toxicity was observed (P < 0.05). When the toxicity of the CuO-NPs to yeast cells was compared with the toxicities of copper salt and bCuO, we concluded that the toxicity of CuO-NPs should be attributed to soluble copper rather than to the nanoparticles. The striking difference in adverse effects of C-NPs and C/Cu-NPs with equivalent surface areas also proved this. A toxicity assay revealed that the multiple-gene-deleted mutant was significantly more sensitive to CuO-NPs than the wild type. Specifically, compared with the wild-type strain, copper was readily taken up by mutant strains when cell permeability genes were knocked out, and the mutants with deletions of genes regulated under oxidative stress (OS) were likely producing more reactive oxygen species (ROS). Hence, as mechanism-based gene inactivation could increase the susceptibility of yeast, the multiple-gene-deleted mutants should be improved model organisms to investigate the toxicity of nanoparticles.

Assessment of the lung toxicity of copper oxide nanoparticles: current status

Copper oxide nanoparticles (CuO NPs) are being used in several industrial and commercial products. Inhalation is one of the most significant routes of metal oxide NP exposure. Hence, the toxicity of CuO NPs in lung tissues is of great concern. In vitro studies have indicated that CuO NPs induce cytotoxicity, oxidative stress and genetic toxicity in cultivated human lung cells. Leaching of Cu ions, reactive oxygen species generation and autophagy appear to be the underlying mechanisms of Cu NP toxicity in lung cells. In vivo studies on the lung toxicity of CuO NPs are largely lacking. Some studies have shown that intratracheal instillation of CuO NPs induced oxidative stress, inflammation and neoplastic lesions in rats. This review critically assessed the current findings of the toxicity of CuO NPs in the lung.

Cu Nanoparticles Have Different Impacts in Escherichia coli and Lactobacillus brevis than Their Microsized and Ionic Analogues

Copper formulations have been used for decades for antimicrobial and antifouling applications. With the development of nanoformulations of copper that are more effective than their ionic and microsized analogues, a key regulatory question is whether these materials should be treated as new or existing materials. To address this issue, here we compare the magnitude and mechanisms of toxicity of a series of Cu species (at concentration ranging from 2 to 250 μg/mL), including nano Cu, nano CuO, nano Cu(OH)2 (CuPro and Kocide), micro Cu, micro CuO, ionic Cu(2+) (CuCl2 and CuSO4) in two species of bacteria (Escherichia coli and Lactobacillus brevis). The primary size of the particles studied ranged from 10 nm to 10 μm. Our results reveal that Cu and CuO nanoparticles (NPs) are more toxic than their microsized counterparts at the same Cu concentration, with toxicities approaching those of the ionic Cu species. Strikingly, these NPs showed distinct differences in their mode of toxicity when compared to the ionic and microsized Cu, highlighting the unique toxicity properties of materials at the nanoscale. In vitro DNA damage assays reveal that both nano Cu and microsized Cu are capable of causing complete degradation of plasmid DNA, but electron tomography results show that only nanoformulations of Cu are internalized as intact intracellular particles. These studies suggest that nano Cu at the concentration of 50 μg/mL may have unique genotoxicity in bacteria compared to ionic and microsized Cu.

A genome-wide nanotoxicology screen of Saccharomyces cerevisiae mutants reveals the basis for cadmium sulphide quantum dot tolerance and sensitivity

The use of cadmium sulphide quantum dots (CdS QDs) is increasing, particularly in the electronics industry. Their size (1-10 nm in diameter) is, however, such that they can be taken up by living cells. Here, a bakers' yeast (Saccharomyces cerevisiae) deletion mutant collection has been exploited to provide a high-throughput means of revealing the genetic basis for tolerance/susceptibility to CdS QD exposure. The deletion of 112 genes, some associated with the abiotic stress response, some with various metabolic processes, some with mitochondrial organization, some with transport and some with DNA repair, reduced the level of tolerance to CdS QDs. A gene ontology analysis highlighted the role of oxidative stress in determining the cellular response. The transformation of sensitive mutants with centromeric plasmids harbouring DNA from a wild type strain restored the wild type growth phenotype when the complemented genes encoded either HSC82, DSK2 or ALD3. The use of these simple eukaryote knock-out mutants for functional toxicogenomic analysis will inform studies focusing on higher organisms.

A novel method for comparison of biocidal properties of nanomaterials to bacteria, yeasts and algae

Toxicity testing of nanomaterials (NMs) is experimentally challenging because NMs may interfere with test environment and assay components. In this work we propose a simple and reliable method--a 'spot test' to compare biocidal potency of NMs to unicellular microorganisms such as bacteria, yeasts and algae. The assay is straightforward: cells are incubated in deionized water suspensions of NMs for up to 24h and then pipetted as a 'spot' on agarized medium. Altogether seven bacterial strains, yeast and a microalga were tested. CuO, TiO2 and two different Ag NPs, multi-wall C-nanotubes (MWCNTs), AgNO3, CuSO4, 3,5-dichlorophenol, triclosan and H2O2 were analyzed. The biocidal potency of tested substances ranged from 0.1mg/L to >1000 mg/L; whereas, the least potent NMs toward all test species were TiO2 NPs and MWCNTs and most potent Ag and CuO NPs. Based on the similar toxicity pattern of the tested chemicals on the nine unicellular organisms in deionized water we conclude that toxicity mechanism of biocidal chemicals seems to be similar, whatever the organism (bacteria, yeast, alga). Therefore, when the organisms are not 'protected' by their environment that usually includes various organic and inorganic supplements their tolerance to toxicants is chemical- rather than organism-dependent.

Dynamics of sub-lethal effects of nano-CuO on the microalga Chlamydomonas reinhardtii during short-term exposure

Though nano-CuO has been classified as toxic toward aquatic microorganisms and its use in various applications is expected to increase in near future, its ecotoxicity is currently poorly understood. The aim of this study was to investigate the mechanisms of nano-CuO toxicity based on the paradigm of oxidative stress, the dynamics of response over 24h, and the modulating effect of exposure conditions on toxicity and responses. To this end, the model microalga Chlamydomonas reinhardtii was exposed to 10mgL(-1) nano-CuO in five different exposure media, including two different growth media, two Good's buffers, and natural lake water. The measured endpoints included cell growth, morphological aspect, chlorophyll autofluorescence, oxidative stress, and membrane permeabilization. The results suggest that agglomerated nano-CuO is toxic and that exposure media are decisive in whether or not particles or free Cu ions are the main mediators of toxicity. A significant particle effect was only observed in the Good's buffer 3-(N-morpholino) propanesulfonic acid. However, nano-CuO particles especially influenced the dynamics of response early in exposure, between 0h and 5h, suggesting that an adaptation to particle stress may occur or that particles modify the bioavailability of the free Cu ions in early exposure.