Structure of the calcium pump from sarcoplasmic reticulum at 8-A resolution

SERCA2a-phospholamban interaction monitored by an interposed circularly permutated green fluorescent protein

The interaction of phospholamban (PLB) and the sarcoplasmic reticulum Ca²⁺-ATPase (SERCA2a) is a key regulator of cardiac contractility and a therapeutic target in heart failure (HF). PLB-mediated increases in SERCA2a activity improve cardiac function and HF. Clinically, this mechanism can only be exploited by a general activation of the proteinkinase A (PKA), which is associated with side effects and adverse clinical outcomes. A selective interference of the PLB-SERCA2a interaction is desirable but will require novel tools that allow for an integrated assessment of this interaction under both physiological and pathophysiological conditions. A circularly permutated green fluorescent protein (cpGFP) was interposed between SERCA2a and PLB to result into a single SERCA2a-cpGFP-PLB recombinant protein (SGP). Expression, phosphorylation, fluorescence, and function of SGP were evaluated. Expression of SGP-cDNA results in a functional recombinant protein at the predicted molecular weight. The PLB domain of SGP retains its ability to polymerize and can be phosphorylated by PKA activation. This increases the fluorescent yield of SGP by between 10% and 165% depending on cell line and conditions. In conclusion, a single recombinant fusion protein that combines SERCA2a, a circularly permutated green fluorescent protein, and PLB can be expressed in cells and can be phosphorylated at the PLB domain that markedly increases the fluorescence yield. SGP is a novel cellular SERCA2a-PLB interaction monitor.NEW & NOTEWORTHY This study describes the design and characterization of a novel biosensor that can visualize the interaction of SERCA2a and phospholamban (PLB). The biosensor combines SERCA2a, a circularly permutated green fluorescent protein, and PLB into one recombinant protein (SGP). Proteinkinase A activation results in phosphorylation of the PLB domain and is associated with a marked increase in the fluorescence yield to allow for real-time monitoring of the SERCA2a and PLB interaction in cells.

Deciphering the Mechanism of Inhibition of SERCA1a by Sarcolipin Using Molecular Simulations

SERCA1a is an ATPase calcium pump that transports Ca²⁺ from the cytoplasm to the sarco/endoplasmic reticulum lumen. Sarcolipin (SLN), a transmembrane peptide, regulates the activity of SERCA1a by decreasing its Ca²⁺ transport rate, but its mechanism of action is still not well-understood. To decipher this mechanism, we have performed normal mode analysis in the all-atom model, with the SERCA1a-SLN complex, or the isolated SERCA1a, embedded in an explicit membrane. The comparison of the results allowed us to provide an explanation at the atomic level for the action of SLN that is in good agreement with experimental observations. In our analyses, the presence of SLN locally perturbs the TM6 transmembrane helix and as a consequence modifies the position of D800, one of the key metal-chelating residues. Additionally, it reduces the flexibility of the gating residues, V304, and E309 in TM4, at the entrance of the Ca²⁺ binding sites, which would decrease the affinity for Ca²⁺. Unexpectedly, SLN has also an effect on the ATP binding site more than 35 Å away, due to the straightening of TM5, a long helix considered as the spine of the protein. The straightening of TM5 modifies the structure of the P-N linker that sits above it, and which comprises the ³⁵¹DKTG³⁵⁴ conserved motif, resulting in an increase of the distance between ATP and the phosphorylation site. As a consequence, the turn-over rate could be affected. All this gives SERCA1a the propensity to go toward a Ca²⁺ low-affinity E2-like state in the presence of SLN and toward a Ca²⁺ high-affinity E1-like state in the absence of SLN. In addition to a general mechanism of inhibition of SERCA1a regulatory peptides, this study also provides an insight into the conformational transition between the E2 and E1 states.

SERCA2a ameliorates cardiomyocyte T-tubule remodeling via the calpain/JPH2 pathway to improve cardiac function in myocardial ischemia/reperfusion mice

Transverse-tubules (T-tubules) play pivotal roles in Ca²⁺-induced, Ca²⁺ release and excitation–contraction coupling in cardiomyocytes. The purpose of this study was to uncover mechanisms where sarco/endoplasmic reticulum Ca²⁺ ATPase (SERCA2a) improved cardiac function through T-tubule regulation during myocardial ischemia/reperfusion (I/R). SERCA2a protein expression, cytoplasmic [Ca²⁺]_i, calpain activity, junctophilin-2 (JPH2) protein expression and intracellular localization, cardiomyocyte T-tubules, contractility and calcium transients in single cardiomyocytes and in vivo cardiac functions were all examined after SERCA2a knockout and overexpression, and Calpain inhibitor PD150606 (PD) pretreatment, following myocardial I/R. This comprehensive approach was adopted to clarify SERCA2a mechanisms in improving cardiac function in mice. Calpain was activated during myocardial I/R, and led to the proteolytic cleavage of JPH2. This altered the T-tubule network, the contraction function/calcium transients in cardiomyocytes and in vivo cardiac functions. During myocardial I/R, PD pretreatment upregulated JPH2 expression and restored it to its intracellular location, repaired the T-tubule network, and contraction function/calcium transients of cardiomyocytes and cardiac functions in vivo. SERCA2a suppressed calpain activity via [Ca²⁺]_i, and ameliorated these key indices. Our results suggest that SERCA2a ameliorates cardiomyocyte T-tubule remodeling via the calpain/JPH2 pathway, thereby improving cardiac function in myocardial I/R mice.

Targeting oncogenic Notch signaling with SERCA inhibitors

P-type ATPase inhibitors are among the most successful and widely prescribed therapeutics in modern pharmacology. Clinical transition has been safely achieved for H+/K+ ATPase inhibitors such as omeprazole and Na+/K+-ATPase inhibitors like digoxin. However, this is more challenging for Ca2+-ATPase modulators due to the physiological role of Ca2+ in cardiac dynamics. Over the past two decades, sarco-endoplasmic reticulum Ca2+-ATPase (SERCA) modulators have been studied as potential chemotherapy agents because of their Ca2+-mediated pan-cancer lethal effects. Instead, recent evidence suggests that SERCA inhibition suppresses oncogenic Notch1 signaling emerging as an alternative to γ-secretase modulators that showed limited clinical activity due to severe side effects. In this review, we focus on how SERCA inhibitors alter Notch1 signaling and show that Notch on-target-mediated antileukemia properties of these molecules can be achieved without causing overt Ca2+ cellular overload.

Helical Membrane Protein Crystallization in the New Era of Electron Cryo-Microscopy

Helical assemblies of proteins, which consist of a two-dimensional lattice of identical subunits arranged with helical symmetry, are a common structural motif in nature. For membrane proteins, crystallization protocols can induce helical arrangements and take advantage of the symmetry found in these assemblies for the structural determination of target proteins. Modern advances in the field of electron cryo-microscopy (cryo-EM), in particular the advent of direct electron detectors, have opened the potential for structure determination of membrane proteins in such assemblies at high resolution. The nature of the symmetry in helical crystals of membrane proteins means that a single image potentially contains enough information for three-dimensional structural determination. With the current direct electron detectors, we have never been closer to making this a reality. Here, we present a protocol detailing the preparation of helical crystals, with an emphasis on further cryo-EM analysis and structural determination of the sarco(endo)plasmic reticulum Ca²⁺-ATPase in the presence of regulatory subunits such as phospholamban.

A Role for SERCA Pumps in the Neurobiology of Neuropsychiatric and Neurodegenerative Disorders

Calcium (Ca²⁺) is a fundamental regulator of cell fate and intracellular Ca²⁺ homeostasis is crucial for proper function of the nerve cells. Given the complexity of neurons, a constellation of mechanisms finely tunes the intracellular Ca²⁺ signaling. We are focusing on the sarco/endoplasmic reticulum (SR/ER) calcium (Ca²⁺)-ATPase (SERCA) pump, an integral ER protein. SERCA's well established role is to preserve low cytosolic Ca²⁺ levels ([Ca²⁺]_cyt), by pumping free Ca²⁺ ions into the ER lumen, utilizing ATP hydrolysis. The SERCA pumps are encoded by three distinct genes, SERCA1-3, resulting in 12 known protein isoforms, with tissue-dependent expression patterns. Despite the well-established structure and function of the SERCA pumps, their role in the central nervous system is not clear yet. Interestingly, SERCA-mediated Ca²⁺ dyshomeostasis has been associated with neuropathological conditions, such as bipolar disorder, schizophrenia, Parkinson's disease and Alzheimer's disease. We summarize here current evidence suggesting a role for SERCA in the neurobiology of neuropsychiatric and neurodegenerative disorders, thus highlighting the importance of this pump in brain physiology and pathophysiology.

B-type natriuretic peptide and its role in altering Ca2+-regulatory proteins in heart failure-mechanistic insights

Heart failure (HF) is a worldwide disease with high levels of morbidity and mortality. The pathogenesis of HF is complicated and involves imbalances in hormone and electrolyte. B-type natriuretic peptide (BNP) has served as a biomarker of HF severity, and in recent years, it has been used to treat the disease, thanks to its cardio-protective effects, such as diuresis, natriuresis, and vasodilatation. In stage C/D HF, symptoms are severe despite elevated BNP. Disturbances in Ca²⁺ homeostasis are often a dominating feature of the disease, causing Ca²⁺-regulatory protein dysfunction, including reduced expression and activity of sarcoplasmic reticulum Ca²⁺-ATPase2a (SERCA2a), impaired ryanodine receptors (RYRs) function, intensive Na⁺-Ca²⁺ exchanger (NCX), and downregulation of S100A1. The relationship between natriuretic peptides (NPs) and Ca²⁺-regulatory proteins has been widely studied and represents important mechanisms in the etiology of HF. In this review, we present evidence that BNP may regulate Ca²⁺-regulatory proteins, in particular, suppressing SERCA2a and S100A1 expression. However, relationships between BNP and other Ca²⁺-regulatory proteins remain vague.

The SERCA2: A Gatekeeper of Neuronal Calcium Homeostasis in the Brain

Calcium (Ca²⁺) ions are prominent cell signaling regulators that carry information for a variety of cellular processes and are critical for neuronal survival and function. Furthermore, Ca²⁺ acts as a prominent second messenger that modulates divergent intracellular cascades in the nerve cells. Therefore, nerve cells have developed intricate Ca²⁺ signaling pathways to couple the Ca²⁺ signal to their biochemical machinery. Notably, intracellular Ca²⁺ homeostasis greatly relies on the rapid redistribution of Ca²⁺ ions into the diverse subcellular organelles which serve as Ca²⁺ stores, including the endoplasmic reticulum (ER). It is well established that Ca²⁺ released into the neuronal cytoplasm is pumped back into the ER by the sarco-/ER Ca²⁺ ATPase 2 (SERCA2), a P-type ion-motive ATPase that resides on the ER membrane. Even though the SERCA2 is constitutively expressed in nerve cells, its precise role in brain physiology and pathophysiology is not well-characterized. Intriguingly, SERCA2-dependent Ca²⁺ dysregulation has been implicated in several disorders that affect cognitive function, including Darier's disease, schizophrenia, Alzheimer's disease, and cerebral ischemia. The current review summarizes knowledge on the expression pattern of the different SERCA2 isoforms in the nervous system, and further discusses evidence of SERCA2 dysregulation in various neuropsychiatric disorders. To the best of our knowledge, this is the first literature review that specifically highlights the critical role of the SERCA2 in the brain. Advancing knowledge on the role of SERCA2 in maintaining neuronal Ca²⁺ homeostasis may ultimately lead to the development of safer and more effective pharmacotherapies to combat debilitating neuropsychiatric disorders.

LncRNA ZFAS1 as a SERCA2a Inhibitor to Cause Intracellular Ca2+ Overload and Contractile Dysfunction in a Mouse Model of Myocardial Infarction

RATIONALE

Ca²⁺ homeostasis-a critical determinant of cardiac contractile function-is critically regulated by SERCA2a (sarcoplasmic reticulum Ca²⁺-ATPase 2a). Our previous study has identified ZFAS1 as a new lncRNA biomarker of acute myocardial infarction (MI).

OBJECTIVE

To evaluate the effects of ZFAS1 on SERCA2a and the associated Ca²⁺ homeostasis and cardiac contractile function in the setting of MI.

METHODS AND RESULTS

ZFAS1 expression was robustly increased in cytoplasm and sarcoplasmic reticulum in a mouse model of MI and a cellular model of hypoxia. Knockdown of endogenous ZFAS1 by virus-mediated silencing shRNA partially abrogated the ischemia-induced contractile dysfunction. Overexpression of ZFAS1 in otherwise normal mice created similar impairment of cardiac function as that observed in MI mice. Moreover, at the cellular level, ZFAS1 overexpression weakened the contractility of cardiac muscles. At the subcellular level, ZFAS1 deleteriously altered the Ca²⁺ transient leading to intracellular Ca²⁺ overload in cardiomyocytes. At the molecular level, ZFAS1 was found to directly bind SERCA2a protein and to limit its activity, as well as to repress its expression. The effects of ZFAS1 were readily reversible on knockdown of this lncRNA. Notably, a sequence domain of ZFAS1 gene that is conserved across species mimicked the effects of the full-length ZFAS1. Mutation of this domain or application of an antisense fragment to this conserved region efficiently canceled out the deleterious actions of ZFAS1. ZFAS1 had no significant effects on other Ca²⁺-handling regulatory proteins.

CONCLUSIONS

ZFAS1 is an endogenous SERCA2a inhibitor, acting by binding to SERCA2a protein to limit its intracellular level and inhibit its activity, and a contributor to the impairment of cardiac contractile function in MI. Therefore, anti-ZFAS1 might be considered as a new therapeutic strategy for preserving SERCA2a activity and cardiac function under pathological conditions of the heart.

Crystal Structure of the Vanadate-Inhibited Ca(2+)-ATPase

Vanadate is the hallmark inhibitor of the P-type ATPase family; however, structural details of its inhibitory mechanism have remained unresolved. We have determined the crystal structure of sarcoplasmic reticulum Ca(2+)-ATPase with bound vanadate in the absence of Ca(2+). Vanadate is bound at the catalytic site as a planar VO3(-) in complex with water and Mg(2+) in a dephosphorylation transition-state-like conformation. Validating bound VO3(-) by anomalous difference Fourier maps using long-wavelength data we also identify a hitherto undescribed Cl(-) site near the dephosphorylation site. Crystallization was facilitated by trinitrophenyl (TNP)-derivatized nucleotides that bind with the TNP moiety occupying the binding pocket that normally accommodates the adenine of ATP, rationalizing their remarkably high affinity for E2P-like conformations of the Ca(2+)-ATPase. A comparison of the configurations of bound nucleotide analogs in the E2·VO3(-) structure with that in E2·BeF3(-) (E2P ground state analog) reveals multiple binding modes to the Ca(2+)-ATPase.

Decoding P4-ATPase substrate interactions

Cellular membranes display a diversity of functions that are conferred by the unique composition and organization of their proteins and lipids. One important aspect of lipid organization is the asymmetric distribution of phospholipids (PLs) across the plasma membrane. The unequal distribution of key PLs between the cytofacial and exofacial leaflets of the bilayer creates physical surface tension that can be used to bend the membrane; and like Ca2+, a chemical gradient that can be used to transduce biochemical signals. PL flippases in the type IV P-type ATPase (P4-ATPase) family are the principle transporters used to set and repair this PL gradient and the asymmetric organization of these membranes are encoded by the substrate specificity of these enzymes. Thus, understanding the mechanisms of P4-ATPase substrate specificity will help reveal their role in membrane organization and cell biology. Further, decoding the structural determinants of substrate specificity provides investigators the opportunity to mutationally tune this specificity to explore the role of particular PL substrates in P4-ATPase cellular functions. This work reviews the role of P4-ATPases in membrane biology, presents our current understanding of P4-ATPase substrate specificity, and discusses how these fundamental aspects of P4-ATPase enzymology may be used to enhance our knowledge of cellular membrane biology.

Deducing the symmetry of helical assemblies: Applications to membrane proteins

Helical reconstruction represents a convenient and powerful approach for structure determination of macromolecules that assemble into helical arrays. In the case of membrane proteins, formation of tubular crystals with helical symmetry represents an attractive alternative, especially when their small size precludes the use of single-particle analysis. An essential first step for helical reconstruction is to characterize the helical symmetry. This process is often daunting, due to the complexity of helical diffraction and to the low signal-to-noise ratio in images of individual assemblies. Furthermore, the large diameters of the tubular crystals produced by membrane proteins exacerbates the innate ambiguities that, if not resolved, will produce incorrect structures. In this report, we describe a set of tools that can be used to eliminate ambiguities and to validate the choice of symmetry. The first approach increases the signal-to-noise ratio along layer lines by incoherently summing data from multiple helical assemblies, thus producing several candidate indexing schemes. The second approach compares the layer lines from images with those from synthetic models built with the various candidate schemes. The third approach uses unit cell dimensions measured from collapsed tubes to distinguish between these candidate schemes. These approaches are illustrated with tubular crystals from a boron transporter from yeast, Bor1p, and a β-barrel channel from the outer membrane of E. coli, OmpF.

Early administration of nifedipine protects against angiotensin II-induced cardiomyocyte hypertrophy through regulating CaMKII-SERCA2a pathway and apoptosis in rat cardiomyocytes

The calcium channel blocker (CCB), nifedipine, is a more effective treatment for early- than late-stage cardiac hypertrophy. We investigated the effects of early- and late-stage nifedipine administration on calcium homeostasis, CaMKII (Ca(2+) /calmodulin-dependent protein kinase II) activity and apoptosis of cardiomyocytes under hypertrophic stimulation with angiotensin II (AngII). Primary rat cardiomyocytes were divided into five treatment groups: AK, AngII plus the CaMKII inhibitor, KN-93; AN-1 (early-stage), AngII plus nifedipine × 48 h; AN-2 (late-stage), AngII × 48 h, then AngII plus nifedipine × 48 h; C, untreated; and A, AngII × 48 h. The t1/2β [time required for intracellular Ca(2+) concentration ([Ca(2+) ]i) to decline to one half of the peak value] decreased; however, CaMKII and SERCA2a (sarcoplasmic reticulum Ca(2+) -ATPase 2a) activities increased in the AN-1 group compared with the AK group. In the AN-2 group compared with the AN-1 group, CaMKII activity, t1/2α [time required for [Ca(2+) ]i to increase from the bottom to one half of peak value], t1/2β, and apoptosis increased. These results indicate that the timing of CCB administration affects the calcium concentration and apoptosis of hypertrophic cardiomyocytes through the CaMKII-SERCA2a signalling pathway, thereby influencing the drug's protective activity against cardiomyocyte hypertrophy.

Two-Dimensional Crystallization of the Ca(2+)-ATPase for Electron Crystallography

Electron crystallography of two-dimensional crystalline arrays is a powerful alternative for the structure determination of membrane proteins. The advantages offered by this technique include a native membrane environment and the ability to closely correlate function and dynamics with crystalline preparations and structural data. Herein, we provide a detailed protocol for the reconstitution and two-dimensional crystallization of the sarcoplasmic reticulum calcium pump (also known as Ca(2+)-ATPase or SERCA) and its regulatory subunits phospholamban and sarcolipin.

Electron Microscopy: From 2D to 3D Images with Special Reference to Muscle

This is a brief and necessarily very sketchy presentation of the evolution in electron microscopy (EM) imaging that was driven by the necessity of extracting 3-D views from the essentially 2-D images produced by the electron beam. The lens design of standard transmission electron microscope has not been greatly altered since its inception. However, technical advances in specimen preparation, image collection and analysis gradually induced an astounding progression over a period of about 50 years. From the early images that redefined tissues, cell and cell organelles at the sub-micron level, to the current nano-resolution reconstructions of organelles and proteins the step is very large. The review is written by an investigator who has followed the field for many years, but often from the sidelines, and with great wonder. Her interest in muscle ultrastructure colors the writing. More specific detailed reviews are presented in this issue.

Genome-wide analysis of plant-type II Ca(2+)ATPases gene family from rice and Arabidopsis: potential role in abiotic stresses

The Plant Ca(2+)ATPases are members of the P-type ATPase superfamily and play essential roles in pollen tube growth, vegetative development, inflorescence architecture, stomatal opening or closing as well as transport of Ca(2+), Mn(2+) and Zn(2+). Their role in abiotic stress adaptation by activation of different signaling pathways is emerging. In Arabidopsis, the P-type Ca(2+)ATPases can be classified in two distinct groups: type IIA (ECA) and type IIB (ACA). The availability of rice genome sequence allowed performing a genome-wide search for P-type Ca(2+)ATPases proteins, and the comparison of the identified proteins with their homologs in Arabidopsis model plant. In the present study, we identified the P-type II Ca(2+)ATPases from rice by analyzing their phylogenetic relationship, multiple alignment, cis-regulatory elements, protein domains, motifs and homology percentage. The phylogenetic analysis revealed that rice type IIA Ca(2+)ATPases clustered with Arabidopsis type IIA Ca(2+)ATPases and showed high sequence similarity within the group, whereas rice type IIB Ca(2+)ATPases presented variable sequence similarities with Arabidopsis type IIB members. The protein homology modeling, identification of putative transmembrane domains and conserved motifs of rice P-type II Ca(2+)ATPases provided information on their functions and structural architecture. The analysis of P-type II Ca(2+)ATPases promoter regions in rice showed multiple stress-induced cis-acting elements. The expression profile analysis indicated vital roles of P-type II Ca(2+)ATPases in stress signaling, plant development and abiotic stress responses. The comprehensive analysis and expression profiling provided a critical platform for functional characterization of P-type II Ca(2+)ATPase genes that could be applied in engineering crop plants with modified calcium signaling and homeostatic pathways.

Structure-function insights of membrane and soluble proteins revealed by electron crystallography

Electron crystallography is emerging as an important method in solving protein structures. While it has found extensive applications in the understanding of membrane protein structure and function at a wide range of resolutions, from revealing oligomeric arrangements to atomic models, electron crystallography has also provided invaluable information on the soluble α/β-tubulin which could not be obtained by any other method to date. Examples of critical insights from selected structures of membrane proteins as well as α/β-tubulin are described here, demonstrating the vast potential of electron crystallography that is first beginning to unfold.

Tubular crystals and helical arrays: structural determination of HIV-1 capsid assemblies using iterative helical real-space reconstruction

Helical structures are important in many different life forms and are well-suited for structural studies by cryo-EM. A unique feature of helical objects is that a single projection image contains all the views needed to perform a three-dimensional (3D) crystallographic reconstruction. Here, we use HIV-1 capsid assemblies to illustrate the detailed approaches to obtain 3D density maps from helical objects. Mature HIV-1 particles contain a conical- or tubular-shaped capsid that encloses the viral RNA genome and performs essential functions in the virus life cycle. The capsid is composed of capsid protein (CA) oligomers which are helically arranged on the surface. The N-terminal domain (NTD) of CA is connected to its C-terminal domain (CTD) through a flexible hinge. Structural analysis of two- and three-dimensional crystals provided molecular models of the capsid protein (CA) and its oligomer forms. We determined the 3D density map of helically assembled HIV-1 CA hexamers at 16 Å resolution using an iterative helical real-space reconstruction method. Docking of atomic models of CA-NTD and CA-CTD dimer into the electron density map indicated that the CTD dimer interface is retained in the assembled CA. Furthermore, molecular docking revealed an additional, novel CTD trimer interface.

The architecture of CopA from Archeaoglobus fulgidus studied by cryo-electron microscopy and computational docking

CopA uses ATP to pump Cu(+) across cell membranes. X-ray crystallography has defined atomic structures of several related P-type ATPases. We have determined a structure of CopA at 10 Å resolution by cryo-electron microscopy of a new crystal form and used computational molecular docking to study the interactions between the N-terminal metal-binding domain (NMBD) and other elements of the molecule. We found that the shorter-chain lipids used to produce these crystals are associated with movements of the cytoplasmic domains, with a novel dimer interface and with disordering of the NMBD, thus offering evidence for the transience of its interaction with the other cytoplasmic domains. Docking identified a binding site that matched the location of the NMBD in our previous structure by cryo-electron microscopy, allowing a more detailed view of its binding configuration and further support for its role in autoinhibition.

The sarcoplasmic Ca2+-ATPase: design of a perfect chemi-osmotic pump

The sarcoplasmic (SERCA 1a) Ca2+-ATPase is a membrane protein abundantly present in skeletal muscles where it functions as an indispensable component of the excitation-contraction coupling, being at the expense of ATP hydrolysis involved in Ca2+/H+ exchange with a high thermodynamic efficiency across the sarcoplasmic reticulum membrane. The transporter serves as a prototype of a whole family of cation transporters, the P-type ATPases, which in addition to Ca2+ transporting proteins count Na+, K+-ATPase and H+, K+-, proton- and heavy metal transporting ATPases as prominent members. The ability in recent years to produce and analyze at atomic (2·3-3 Å) resolution 3D-crystals of Ca2+-transport intermediates of SERCA 1a has meant a breakthrough in our understanding of the structural aspects of the transport mechanism. We describe here the detailed construction of the ATPase in terms of one membraneous and three cytosolic domains held together by a central core that mediates coupling between Ca2+-transport and ATP hydrolysis. During turnover, the pump is present in two different conformational states, E1 and E2, with a preference for the binding of Ca2+ and H+, respectively. We discuss how phosphorylated and non-phosphorylated forms of these conformational states with cytosolic, occluded or luminally exposed cation-binding sites are able to convert the chemical energy derived from ATP hydrolysis into an electrochemical gradient of Ca2+ across the sarcoplasmic reticulum membrane. In conjunction with these basic reactions which serve as a structural framework for the transport function of other P-type ATPases as well, we also review the role of the lipid phase and the regulatory and thermodynamic aspects of the transport mechanism.

Helical crystallization of two example membrane proteins MsbA and the Ca(2+)-ATPase

Helical crystallization is a powerful tool for the moderate resolution structure determination of integral membrane proteins, where the insight gained often includes domain architecture and the disposition of α-helical segments. A necessary first step toward helical crystallization involves membrane protein reconstitution, which itself is a powerful technique for structure-function studies of integral membrane proteins. The correct insertion of a detergent-solubilized, purified membrane protein into lipid vesicles (proteoliposomes) can facilitate the functional characterization of the protein in a well-defined, chemically pure environment without interference from other membrane-associated components. In addition, the lipid-to-protein ratio can be controlled during reconstitution to generate a high concentration of a particular membrane protein in the proteoliposomes, which are then suitable for both functional assays and crystallization trials. Traditional approaches to two-dimensional crystallization for electron microscopy rely on dialysis methods for the simultaneous reconstitution and crystallization of a membrane protein [Kühlbrandt, W. (1992). Two-dimensional crystallization of membrane proteins. Q. Rev. Biophys.25, 1-49.], yet some systems allow these two steps to be experimentally separated and independently considered. Some examples of integral membrane proteins that have been reconstituted and crystallized in a helical lattice include cytochrome bc1 complex from bovine heart [Akiba, T., et al. (1996). Three-dimensional structure of bovine cytochrome bc(1) complex by electron cryomicroscopy and helical image reconstruction. Nat. Struct. Biol.3, 553-561.], Escherichia coli melibiose permease [Rigaud, J. L., et al. (1997). Bio-beads: An efficient strategy for two-dimensional crystallization of membrane proteins. J. Struct. Biol.118, 226-235.], a bacterial ATP-binding cassette transporter MsbA [Ward, A., et al. (2009). Nucleotide dependent packing differences in helical crystals of the ABC transporter MsbA. J. Struct. Biol.165, 169-175.], and the sarcoplasmic reticulum Ca(2+)-ATPase [Young, H. S., et al. (1997). How to make tubular crystals by reconstitution of detergent-solubilized Ca(2+)-ATPase. Biophys. J.72, 2545-2558.]. The reconstitution and helical crystallization of MsbA and Ca(2+)-ATPase will be the focus of this chapter.

Functioning of Saccharomyces cerevisiae Pma1 H+-ATPase carrying the minimal number of cysteine residues

Pma1 H+-ATPase is the primary proton pump in the plasma membrane of the yeast Saccharomyces cerevisiae. It generates an electrochemical proton gradient, thus providing energy for secondary solute transport systems. The enzyme contains nine cysteines, three (Cys148, Cys312, and Cys867) in transmembrane segments and the rest (Cys221, Cys376, Cys409, Cys472, Cys532, and Cys569) in the cytosolic parts of the molecule. Although individually they are not essential for the functioning of the ATPase, substitution of all of them leads to the loss of enzyme activity and impairment of biogenesis. By means of site-directed mutagenesis combined with other molecular-biological and biochemical methods, this work defines different combinations of minimal cysteine content that are consistent with ATPase function.

Reconstruction of helical filaments and tubes

While Fourier-Bessel methods gave rise to the first three-dimensional reconstruction of an object from electron microscopic images, and these methods have dominated three-dimensional reconstruction of helical filaments and tubes for 30 years, single-particle approaches to helical reconstruction have emerged within the past 10 years that are now the main method being used. The Iterative Helical Real Space Reconstruction (IHRSR) approach has been the main methodology, and it surmounts many of the problems posed by real polymers that are flexible, display less than crystalline order, or are weakly scattering. The main difficulty in applying this method, or even Fourier-Bessel methods, is in determining the approximate helical symmetry. This chapter focuses on some of the intrinsic ambiguities that are present when trying to determine the helical symmetry from power spectra of images and argues that complementary techniques or some form of prior knowledge about the subunit may be needed to have confidence in the solution that is found.

From electron microscopy maps to atomic structures using normal mode-based fitting

Electron microscopy (EM) has made possible to solve the structure of many proteins. However, the resolution of some of the EM maps is too low for interpretation at the atomic level, which is particularly important to describe function. We describe methods that combine low-resolution EM data with atomic structures for different conformations of the same protein in order to produce atomic models compatible with the EM map.We illustrate these methods with EM data from decavanadate-induced tubular crystals of a pseudo-phosphorylated intermediate of Ca-ATPase and the various atomic structures of other intermediates available in the Protein Data Bank (PDB). Determination of atomic structure permits not only to analyse protein-protein interactions in the crystals, but also to localize residues in the proximity of the crystallizing agent both within Ca-ATPase and between Ca-ATPase molecules.

Present and future of membrane protein structure determination by electron crystallography

Membrane proteins are critical to cell physiology, playing roles in signaling, trafficking, transport, adhesion, and recognition. Despite their relative abundance in the proteome and their prevalence as targets of therapeutic drugs, structural information about membrane proteins is in short supply. This chapter describes the use of electron crystallography as a tool for determining membrane protein structures. Electron crystallography offers distinct advantages relative to the alternatives of X-ray crystallography and NMR spectroscopy. Namely, membrane proteins are placed in their native membranous environment, which is likely to favor a native conformation and allow changes in conformation in response to physiological ligands. Nevertheless, there are significant logistical challenges in finding appropriate conditions for inducing membrane proteins to form two-dimensional arrays within the membrane and in using electron cryo-microscopy to collect the data required for structure determination. A number of developments are described for high-throughput screening of crystallization trials and for automated imaging of crystals with the electron microscope. These tools are critical for exploring the necessary range of factors governing the crystallization process. There have also been recent software developments to facilitate the process of structure determination. However, further innovations in the algorithms used for processing images and electron diffraction are necessary to improve throughput and to make electron crystallography truly viable as a method for determining atomic structures of membrane proteins.

Fourier-Bessel reconstruction of helical assemblies

Helical symmetry is commonly used for building macromolecular assemblies. Helical symmetry is naturally present in viruses and cytoskeletal filaments and also occurs during crystallization of isolated proteins, such as Ca-ATPase and the nicotinic acetyl choline receptor. Structure determination of helical assemblies by electron microscopy has a long history dating back to the original work on three-dimensional (3D) reconstruction. A helix offers distinct advantages for structure determination. Not only can one improve resolution by averaging across the constituent subunits, but each helical assembly provides multiple views of these subunits and thus provides a complete 3D data set. This review focuses on Fourier methods of helical reconstruction, covering the theoretical background, a step-by-step guide to the process, and a practical example based on previous work with Ca-ATPase. Given recent results from helical reconstructions at atomic resolution and the development of graphical user interfaces to aid in the process, these methods are likely to continue to make an important contribution to the field of structural biology.

What can be learned about the function of a single protein from its various X-ray structures: the example of the sarcoplasmic calcium pump

Improvements in the handling of membrane proteins for crystallization, combined with better synchrotron sources for X-ray diffraction analysis, are leading to clarification of the structural details of an ever increasing number of membrane transporters and receptors. Here we describe how this development has resulted in the elucidation at atomic resolution of a large number of structures of the sarcoplasmic Ca(2+)-ATPase (SERCA1a) present in skeletal muscle. The structures corresponding to the various intermediary states have been obtained after stabilization with structural analogues of ATP and of metal fluorides as mimicks of inorganic phosphate. From these results it is possible, in accordance with previous biochemical and molecular biology data, to give a detailed structural description of both ATP hydrolysis and Ca(2+) transport through the membrane, to serve as the starting point for a fuller understanding of the pump mechanism and, in future studies, on the regulatory role of this ubiquitous intracellular Ca(2+)-ATPase in cellular Ca(2+) metabolism in normal and pathological conditions.

Inter-subunit interaction of gastric H+,K+-ATPase prevents reverse reaction of the transport cycle

The gastric H(+),K(+)-ATPase is an ATP-driven proton pump responsible for generating a million-fold proton gradient across the gastric membrane. We present the structure of gastric H(+),K(+)-ATPase at 6.5 A resolution as determined by electron crystallography of two-dimensional crystals. The structure shows the catalytic alpha-subunit and the non-catalytic beta-subunit in a pseudo-E(2)P conformation. Different from Na(+),K(+)-ATPase, the N-terminal tail of the beta-subunit is in direct contact with the phosphorylation domain of the alpha-subunit. This interaction may hold the phosphorylation domain in place, thus stabilizing the enzyme conformation and preventing the reverse reaction of the transport cycle. Indeed, truncation of the beta-subunit N-terminus allowed the reverse reaction to occur. These results suggest that the beta-subunit N-terminus prevents the reverse reaction from E(2)P to E(1)P, which is likely to be relevant for the generation of a large H(+) gradient in vivo situation.

The anti-apoptotic protein HAX-1 interacts with SERCA2 and regulates its protein levels to promote cell survival

Cardiac contractility is regulated through the activity of various key Ca(2+)-handling proteins. The sarco(endo)plasmic reticulum (SR) Ca(2+) transport ATPase (SERCA2a) and its inhibitor phospholamban (PLN) control the uptake of Ca(2+) by SR membranes during relaxation. Recently, the antiapoptotic HS-1-associated protein X-1 (HAX-1) was identified as a binding partner of PLN, and this interaction was postulated to regulate cell apoptosis. In the current study, we determined that HAX-1 can also bind to SERCA2. Deletion mapping analysis demonstrated that amino acid residues 575-594 of SERCA2's nucleotide binding domain are required for its interaction with the C-terminal domain of HAX-1, containing amino acids 203-245. In transiently cotransfected human embryonic kidney 293 cells, recombinant SERCA2 was specifically targeted to the ER, whereas HAX-1 selectively concentrated at mitochondria. On triple transfections with PLN, however, HAX-1 massively translocated to the ER membranes, where it codistributed with PLN and SERCA2. Overexpression of SERCA2 abrogated the protective effects of HAX-1 on cell survival, after hypoxia/reoxygenation or thapsigargin treatment. Importantly, HAX-1 overexpression was associated with down-regulation of SERCA2 expression levels, resulting in significant reduction of apparent ER Ca(2+) levels. These findings suggest that HAX-1 may promote cell survival through modulation of SERCA2 protein levels and thus ER Ca(2+) stores.

Structure of a copper pump suggests a regulatory role for its metal-binding domain

P-type ATPases play an important role in Cu homeostasis, which provides sufficient Cu for metalloenzyme biosynthesis but prevents oxidative damage of free Cu to the cell. The P(IB) group of P-type ATPases includes ATP-dependent pumps of Cu and other transition metal ions, and it is distinguished from other family members by the presence of N-terminal metal-binding domains (MBD). We have determined structures of two constructs of a Cu pump from Archaeoglobus fulgidus (CopA) by cryoelectron microscopy of tubular crystals, which reveal the overall architecture and domain organization of the molecule. By comparing these structures, we localized its N-terminal MBD within the cytoplasmic domains that use ATP hydrolysis to drive the transport cycle. We have built a pseudoatomic model by fitting existing crystallographic structures into the cryoelectron microscopy maps for CopA, which suggest a Cu-dependent regulatory role for the MBD.

Damped-dynamics flexible fitting

In fitting atomic structures into EM maps, it often happens that the map corresponds to a different conformation of the structure. We have developed a new methodology to handle these situations that preserves the covalent geometry of the structure and allows the modeling of large deformations. The first goal is achieved by working in generalized coordinates (positional and internal coordinates), and the second by avoiding harmonic potentials. Instead, we use dampers (shock absorbers) between every pair of atoms, combined with a force field that attracts the atomic structure toward incompletely occupied regions of the EM map. The trajectory obtained by integrating the resulting equations of motion converges to a conformation that, in our validation cases, was very close to the target atomic structure. Compared to current methods, our approach is more efficient and robust against wrong solutions and to overfitting, and does not require user intervention or subjective decisions. Applications to the computation of transition pathways between known conformers, homology and loop modeling, as well as protein docking, are also discussed.

Interdomain fluorescence resonance energy transfer in SERCA probed by cyan-fluorescent protein fused to the actuator domain

We have used a biosynthetically incorporated fluorescent probe to monitor domain movements involved in ion transport by the sarcoendoplasmic reticulum Ca-ATPase (SERCA) from rabbit fast-twitch skeletal muscle. X-ray crystal structures suggest that the nucleotide-binding (N) and actuator (A) domains of SERCA move apart by several nanometers upon Ca binding. To test this hypothesis, cDNA constructs were created to fuse cyan-fluorescent protein (CFP) to the N terminus of SERCA (A domain). This CFP-SERCA fluorescent fusion protein retained activity when expressed in Sf21 insect cells using the baculovirus system. Fluorescence resonance energy transfer (FRET) was used to monitor the A-N interdomain distance for CFP-SERCA selectively labeled with fluorescein isothiocyanate (FITC) at Lys 515 in the N domain. At low [Ca (2+)] (E2 biochemical state), the measured FRET efficiency between CFP (donor in A domain) and FITC (acceptor in N domain) was 0.34 +/- 0.03, indicating a mean distance of 61.6 +/- 2.0 A between probes on the two domains. An increase of [Ca (2+)] to 0.1 mM (E1-Ca biochemical state) decreased the FRET efficiency by 0.06 +/- 0.03, indicating an increase in the mean distance by 3.0 +/- 1.2 A. Quantitative molecular modeling of dual-labeled SERCA, including an accurate calculation of the orientation factor, shows that the FRET data observed in the absence of Ca is consistent with the E2 crystal structure, but the increase in distance (decrease in FRET) induced by Ca is much less than predicted by the E1 crystal structure. We conclude that the E1 crystal structure does not reflect the predominant structure of SERCA under physiological conditions in a functional membrane bilayer.

Role of transmembrane segment M8 in the biogenesis and function of yeast plasma-membrane H(+)-ATPase

Of the four transmembrane helices (M4, M5, M6, and M8) that pack together to form the ion-binding sites of P(2)-type ATPases, M8 has until now received the least attention. The present study has used alanine-scanning mutagenesis to map structure-function relationships throughout M8 of the yeast plasma-membrane H(+)-ATPase. Mutant forms of the ATPase were expressed in secretory vesicles and at the plasma membrane for measurements of ATP hydrolysis and ATP-dependent H(+) pumping. In secretory vesicles, Ala substitutions at a cluster of four positions near the extracytoplasmic end of M8 led to partial uncoupling of H(+) transport from ATP hydrolysis, while substitution of Ser-800 (close to the middle of M8) by Ala increased the apparent stoichiometry of H(+) transport. A similar increase has previously been reported following the substitution of Glu-803 by Gln (Petrov, V. et al., J. Biol. Chem. 275:15709-15718, 2000) at a position known to contribute directly to Ca(2+) binding in the Ca(2+)-ATPase of sarcoplasmic reticulum (Toyoshima, C., et al., Nature 405: 647-655, 2000). Four other mutations in M8 interfered with H(+)-ATPase folding and trafficking to the plasma membrane; based on homology modeling, they occupy positions that appear important for the proper bundling of M8 with M5, M6, M7, and M10. Taken together, these results point to a key role for M8 in the biogenesis, stability, and physiological functioning of the H(+)-ATPase.

The molecular basis for cyclopiazonic acid inhibition of the sarcoplasmic reticulum calcium pump

The sarcoplasmic reticulum Ca(2+)-ATPase is essential for calcium reuptake in the muscle contraction-relaxation cycle. Here we present structures of a calcium-free state with bound cyclopiazonic acid (CPA) and magnesium fluoride at 2.65 A resolution and a calcium-free state with bound CPA and ADP at 3.4A resolution. In both structures, CPA occupies the calcium access channel delimited by transmembrane segments M1-M4. Inhibition of Ca(2+)-ATPase is stabilized by a polar pocket that surrounds the tetramic acid of CPA and a hydrophobic platform that cradles the inhibitor. The calcium pump residues involved include Gln(56), Leu(61), Val(62), and Asn(101). We conclude that CPA inhibits the calcium pump by blocking the calcium access channel and immobilizing a subset of transmembrane helices. In the E2(CPA) structure, ADP is bound in a distinct orientation within the nucleotide binding pocket. The adenine ring is sandwiched between Arg(489) of the nucleotide-binding domain and Arg(678) of the phosphorylation domain. This mode of binding conforms to an adenine recognition motif commonly found in ATP-dependent proteins.

Concerted conformational effects of Ca2+ and ATP are required for activation of sequential reactions in the Ca2+ ATPase (SERCA) catalytic cycle

We relate solution behavior to the crystal structure of the Ca2+ ATPase (SERCA). We find that nucleotide binding occurs with high affinity through interaction of the adenosine moiety with the N domain, even in the absence of Ca2+ and Mg2+, or to the closed conformation stabilized by thapsigargin (TG). Why then is Ca2+ crucial for ATP utilization? The influence of adenosine 5'-(beta,gamma-methylene) triphosphate (AMPPCP), Ca2+, and Mg2+ on proteolytic digestion patterns, interpreted in the light of known crystal structures, indicates that a Ca2+-dependent conformation of the ATPase headpiece is required for a further transition induced by nucleotide binding. This includes opening of the headpiece, which in turn allows inclination of the "A" domain and bending of the "P" domain. Thereby, the phosphate chain of bound ATP acquires an extended configuration allowing the gamma-phosphate to reach Asp351 to form a complex including Mg2+. We demonstrate by Asp351 mutation that this "productive" conformation of the substrate-enzyme complex is unstable because of electrostatic repulsion at the phosphorylation site. However, this conformation is subsequently stabilized by covalent engagement of the -phosphate yielding the phosphoenzyme intermediate. We also demonstrate that the ADP product remains bound with high affinity to the transition state complex but dissociates with lower affinity as the phosphoenzyme undergoes a further conformational change (i.e., E1-P to E2-P transition). Finally, we measured low-affinity ATP binding to stable phosphoenzyme analogues, demonstrating that the E1-P to E2-P transition and the enzyme turnover are accelerated by ATP binding to the phosphoenzyme in exchange for ADP.

Ion permeation through the Na+,K+-ATPase

P-type ATPase pumps generate concentration gradients of cations across membranes in nearly all cells. They provide a polar transmembrane pathway, to which access is strictly controlled by coupled gates that are constrained to open alternately, thereby enabling thermodynamically uphill ion transport (for example, see ref. 1). Here we examine the ion pathway through the Na+,K+-ATPase, a representative P-type pump, after uncoupling its extra- and intracellular gates with the marine toxin palytoxin. We use small hydrophilic thiol-specific reagents as extracellular probes and we monitor their reactions, and the consequences, with cysteine residues introduced along the anticipated cation pathway through the pump. The distinct effects of differently charged reagents indicate that a wide outer vestibule penetrates deep into the Na+,K+-ATPase, where the pathway narrows and leads to a charge-selectivity filter. Acidic residues in this region, which are conserved to coordinate pumped ions, allow the approach of cations but exclude anions. Reversing the charge at just one of those positions converts the pathway from cation selective to anion selective. Close structural homology among the catalytic subunits of Ca2+-, Na+,K+- and H+,K+-ATPases argues that their extracytosolic cation exchange pathways all share these physical characteristics.

Self-association of isolated large cytoplasmic domain of plasma membrane H+ -ATPase from Saccharomyces cerevisiae: role of the phosphorylation domain in a general dimeric model for P-ATPases

Large cytoplasmic domain (LCD) plasma membrane H+ -ATPase from S. cerevisiae was expressed as two fusion polypeptides in E. coli: a DNA sequence coding for Leu353-Ileu674 (LCDh), comprising both nucleotide (N) and phosphorylation (P) domains, and a DNA sequence coding for Leu353-Thr543 (LCDDeltah, lacking the C-terminus of P domain), were inserted in expression vectors pDEST-17, yielding the respective recombinant plasmids. Overexpressed fusion polypeptides were solubilized with 6 M urea and purified on affinity columns, and urea was removed by dialysis. Their predicted secondary structure contents were confirmed by CD spectra. In addition, both recombinant polypeptides exhibited high-affinity 2',3'-O-(2,4,6-trinitrophenyl)adenosine-5'-triphosphate (TNP-ATP) binding (Kd = 1.9 microM and 2.9 microM for LCDh and LCDDeltah, respectively), suggesting that they have native-like folding. The gel filtration profile (HPLC) of purified LCDh showed two main peaks, with molecular weights of 95 kDa and 39 kDa, compatible with dimeric and monomeric forms, respectively. However, a single elution peak was observed for purified LCDDeltah, with an estimated molecular weight of 29 kDa, as expected for a monomer. Together, these data suggest that LCDh exist in monomer-dimer equilibrium, and that the C-terminus of P domain is necessary for self-association. We propose that such association is due to interaction between vicinal P domains, which may be of functional relevance for H+ -ATPase in native membranes. We discuss a general dimeric model for P-ATPases with interacting P domains, based on published crystallography and cryo-electron microscopy evidence.

ATP-binding to P-type ATPases as revealed by biochemical, spectroscopic, and crystallographic experiments

P-type ATPases form a large family of cation translocating ATPases. Recent progress in crystallography yielded several high-resolution structures of Ca(2+)-ATPase from sarco(endo)plasmic reticulum (SERCA) in various conformations. They could elucidate the conformational changes of the enzyme, which are necessary for the translocation of cations, or the mechanism that explains how the nucleotide binding is coupled to the cation transport. However, crystals of proteins are usually obtained only under conditions that significantly differ from the physiological ones and with ligands that are incompatible with the enzyme function, and both of these factors can inevitably influence the enzyme structure. Biochemical (such as mutagenesis, cleavage, and labeling) or spectroscopic experiments can yield only limited structural information, but this information could be considered relevant, because measurement can be performed under physiological conditions and with true ligands. However, interpretation of some biochemical or spectroscopic data could be difficult without precise knowledge of the structure. Thus, only a combination of both these approaches can extract the relevant information and identify artifacts. Briefly, there is good agreement between crystallographic and other experimental data concerning the overall shape of the molecule and the movement of cytoplasmic domains. On the contrary, the E1-AMPPCP crystallographic structure is, in details, in severe conflict with numerous spectroscopic experiments and probably does not represent the physiological state. Notably, the E1-ADP-AlF(4) structure is almost identical to the E1-AMPPCP, again suggesting that the structure is primarily determined by the crystal-growth conditions. The physiological relevance of the E2 and E2-P structures is also questionable, because the crystals were prepared in the presence of thapsigargin, which is known to be a very efficient inhibitor of SERCA. Thus, probably only crystals of E1-2Ca conformation could reflect some physiological state. Combination of biochemical, spectroscopic, and crystallographic data revealed amino acids that are responsible for the interaction with the nucleotide. High sequence homology of the P-type ATPases in the cytoplasmic domains enables prediction of the ATP-interacting amino acids also for other P-type ATPases.

Application of the iterative helical real-space reconstruction method to large membranous tubular crystals of P-type ATPases

Since the development of three-dimensional helical reconstruction methods in the 1960's, advances in Fourier-Bessel methods have facilitated structure determination to near-atomic resolution. A recently developed iterative helical real-space reconstruction (IHRSR) method provides an alternative that uses single-particle analysis in conjunction with the imposition of helical symmetry. In this work, we have adapted the IHRSR algorithm to work with frozen-hydrated tubular crystals of P-type ATPases. In particular, we have implemented layer-line filtering to improve the signal-to-noise ratio, Wiener-filtering to compensate for the contrast transfer function, solvent flattening to improve reference reconstructions, out-of-plane tilt compensation to deal with flexibility in three dimensions, systematic calculation of Fourier shell correlations to track the progress of the refinement, and tools to control parameters as the refinement progresses. We have tested this procedure on datasets from Na(+)/K(+)-ATPase, rabbit skeletal Ca(2+)-ATPase and scallop Ca(2+)-ATPase in order to evaluate the potential for sub-nanometer resolution as well as the robustness in the presence of disorder. We found that Fourier-Bessel methods perform better for well-ordered samples of skeletal Ca(2+)-ATPase and Na(+)/K(+)-ATPase, although improvements to IHRSR are discussed that should reduce this disparity. On the other hand, IHRSR was very effective for scallop Ca(2+)-ATPase, which was too disordered to analyze by Fourier-Bessel methods.

Interactions between Ca2+-ATPase and the pentameric form of phospholamban in two-dimensional co-crystals

Phospholamban (PLB) physically interacts with Ca(2+)-ATPase and regulates contractility of the heart. We have studied this interaction using electron microscopy of large two-dimensional co-crystals of Ca(2+)-ATPase and the I40A mutant of PLB. Crystallization conditions were derived from those previously used for thin, helical crystals, but the addition of a 10-fold higher concentration of magnesium had a dramatic effect on the crystal morphology and packing. Two types of crystals were observed, and were characterized both by standard crystallographic methods and by electron tomography. The two crystal types had the same underlying lattice, which comprised antiparallel dimer ribbons of Ca(2+)-ATPase molecules previously seen in thin, helical crystals, but packed into a novel lattice with p22(1)2(1) symmetry. One crystal type was single-layered, whereas the other was a flattened tube and therefore double-layered. Additional features were observed between the dimer ribbons, which were substantially farther apart than in previous helical crystals. We attributed these additional densities to PLB, and built a three-dimensional model to show potential interactions with Ca(2+)-ATPase. These densities are most consistent with the pentameric form of PLB, despite the use of the presumed monomeric I40A mutant. Furthermore, our results indicate that this pentameric form of PLB is capable of a direct interaction with Ca(2+)-ATPase.

Structure-function relationships in the NA+,K+-pump

The Na,K-pump was discovered about 50 years ago. Since then there has been a methodic investigation of its structure and functional characteristics. The development of the Albers-Post model for the transport cycle was a milestone that provided the framework for detailed understanding of the transport process. The pump is composed of 2 subunits that exist in the membrane as an alphabeta heterodimer. All known enzymatic functions of the pump occur through the alpha subunit. Although necessary for activity, the complete role of the beta subunit is not understood fully. Numerous studies have established that the alphabeta protomer is the minimal functional unit needed to perform the Albers-Post reaction cycle. However, higher orders of aggregation [(alphabeta)n] are commonly detected. There is little evidence that oligomerization has functional consequence for ion transport. The Na+,K+-adenosine triphosphatase (ATPase) is a member of the P-type ATPase family of transporters. Proteins within this family have common amino acid sequence motifs that share functional characteristics and structure. Low-resolution 3-dimensional reconstruction of 2-dimensional crystal diffractions provide evidence for the similarity in tertiary structure of the alpha subunit and the Ca2+ATPase (a closely related P-type ATPase). The spatial location of the beta subunit also is obvious in these reconstructions. Recent high-resolution reconstructions from 3-dimensional crystals of the Ca2+ATPase provide structural details at the atomic level. It now is possible to interpret structurally some of the key steps in the Albers-Post reaction. Some of these high-resolution interpretations are translatable to the Na+,K+-ATPase, but a high-resolution structure of the Na,K-pump is needed for the necessary details of those aspects that are unique to this transporter.

Proton binding sites and conformational analysis of H+K(+)-ATPase

It is proposed that the hydronium ion, H3O+, binds to the E1 conformation of the alpha-subunit of gastric proton pump. The H3O+ binding cavities are characterized parametrically based on valence, sequence, geometry, and size considerations from comparative modeling. The cavities have scope for accommodating monovalent cations of different ionic radii. The H3O+ transport is proposed to be aided by arenes which are arranged regularly along the pump starting from N-domain through the transmembrane region. Step-by-step structural changes accompanying H3O+ occlusion are studied in detail. The observations corroborate well with earlier experimental studies.

Helical crystallization on nickel-lipid nanotubes: perfringolysin O as a model protein

To facilitate purification and subsequent structural studies of recombinant proteins the most widely used genetically encoded tag is the histidine tag (His-tag) which specifically binds to N-nitrilotriacetic-acid-chelated nickel ions. Lipids derivatized with a nickel-chelating head group can be mixed with galactosylceramide glycolipids to prepare lipid nanotubes that bind His-tagged proteins. In this study, we use His-tagged perfringolysin O (PFO), a soluble toxin secreted by the bacterial pathogen Clostridium perfringens, as a model protein to test the utility of nickel-lipid nanotubes as a tool for structural studies of His-tagged proteins. PFO is a member of the cholesterol dependent cytolysin family (CDC) of oligomerizing, pore-forming toxins found in a variety of Gram-positive bacterial pathogens. CDC pores have been difficult to study by X-ray crystallography because they are membrane associated and vary in size. We demonstrate that both a wild-type and a mutant form of PFO form helical arrays on nickel-lipid containing nanotubes. Cryo-electron microscopy and image analysis of the helical arrays were used to reconstruct a 3D density map of wild-type PFO. This study suggests that the use of nickel-lipid nanotubes may offer a general approach for structural studies of recombinant proteins and may provide insights into the molecular interactions of proteins that have a natural affinity for a membrane surface.

Rapid, high-yield expression and purification of Ca2+-ATPase regulatory proteins for high-resolution structural studies

Phospholamban (PLB) and sarcolipin (SLN) are small integral membrane proteins that regulate the Ca(2+)-ATPases of cardiac and skeletal muscle, respectively, and directly alter their calcium transport properties. PLB interacts with and regulates the cardiac Ca(2+)-ATPase at submaximal calcium concentrations, thereby slowing relaxation rates and reducing contractility in the heart. SLN interacts with and regulates the skeletal muscle Ca(2+)-ATPase in a mechanism analogous to that used by PLB. While these regulatory interactions are biochemically and physiologically well characterized, structural details are lacking. To pursue structural studies, such as electron cryo-microscopy and X-ray crystallography, large quantities of over-expressed and purified protein are required. Herein, we report a modified method for producing large quantities of PLB and SLN in a rapid and efficient manner. Briefly, recombinant wild-type PLB and SLN were over-produced in Escherichia coli as maltose binding protein fusion proteins. A tobacco etch virus protease site allowed specific cleavage of the fusion protein and release of recombinant PLB or SLN. Selective solubilization with guanidine-hydrochloride followed by reverse-phase HPLC permitted the rapid, large-scale production of highly pure protein. Reconstitution and measurement of ATPase activity confirmed the functional interaction between our recombinant regulatory proteins and Ca(2+)-ATPase. The inhibitory properties of the over-produced proteins were consistent with previous studies, where the inhibition was relieved by elevated calcium concentrations. In addition, we show that our recombinant PLB and SLN are suitable for high-resolution structural studies.