Mirror-enhanced super-resolution microscopy

Time-of-flight resolved stimulated Raman scattering microscopy using counter-propagating ultraslow Bessel light bullets generation

We present a novel time-of-flight resolved Bessel light bullet-enabled stimulated Raman scattering (B2-SRS) microscopy for deeper tissue 3D chemical imaging with high resolution without a need for mechanical z-scanning. To accomplish the tasks, we conceive a unique method to enable optical sectioning by generating the counter-propagating pump and Stokes Bessel light bullets in the sample, in which the group velocities of the Bessel light bullets are made ultraslow (e.g., vg ≈ 0.1c) and tunable by introducing programmable angular dispersions with a spatial light modulator. We theoretically analyze the working principle of the collinear multicolor Bessel light bullet generations and velocity controls with the relative time-of-flight resolved detection for SRS 3D deep tissue imaging. We have also built the B2-SRS imaging system and present the first demonstration of B2-SRS microscopy with Bessel light bullets for 3D chemical imaging in a variety of samples (e.g., polymer bead phantoms, biological samples such as spring onion tissue and porcine brain) with high resolution. The B2-SRS technique provides a > 2-fold improvement in imaging depth in porcine brain tissue compared to conventional SRS microscopy. The method of optical sectioning in tissue using counter-propagating ultraslow Bessel light bullets developed in B2-SRS is generic and easy to perform and can be readily extended to other nonlinear optical imaging modalities to advance 3D microscopic imaging in biological and biomedical systems and beyond.

Visualization of cristae and mtDNA interactions via STED nanoscopy using a low saturation power probe

Mitochondria are crucial organelles closely associated with cellular metabolism and function. Mitochondrial DNA (mtDNA) encodes a variety of transcripts and proteins essential for cellular function. However, the interaction between the inner membrane (IM) and mtDNA remains elusive due to the limitations in spatiotemporal resolution offered by conventional microscopy and the absence of suitable in vivo probes specifically targeting the IM. Here, we have developed a novel fluorescence probe called HBmito Crimson, characterized by exceptional photostability, fluorogenicity within lipid membranes, and low saturation power. We successfully achieved over 500 frames of low-power stimulated emission depletion microscopy (STED) imaging to visualize the IM dynamics, with a spatial resolution of 40 nm. By utilizing dual-color imaging of the IM and mtDNA, it has been uncovered that mtDNA tends to habitat at mitochondrial tips or branch points, exhibiting an overall spatially uniform distribution. Notably, the dynamics of mitochondria are intricately associated with the positioning of mtDNA, and fusion consistently occurs in close proximity to mtDNA to minimize pressure during cristae remodeling. In healthy cells, >66% of the mitochondria are Class III (i.e., mitochondria >5 μm or with >12 cristae), while it dropped to <18% in ferroptosis. Mitochondrial dynamics, orchestrated by cristae remodeling, foster the even distribution of mtDNA. Conversely, in conditions of apoptosis and ferroptosis where the cristae structure is compromised, mtDNA distribution becomes irregular. These findings, achieved with unprecedented spatiotemporal resolution, reveal the intricate interplay between cristae and mtDNA and provide insights into the driving forces behind mtDNA distribution.

A Microflow Cytometer Enabled by Monolithic Integration of a Microreflector with an Acoustic Resonator

Current microflow cytometers suffer from complicated fluidic integration and low fluorescence collection efficiency, resulting in reduced portability and sensitivity. Herein, we demonstrated a new flow cell design based on an on-chip monolithically integrated microreflector with a bulk acoustic wave resonator (MBAW). It enables simultaneous 3D particle focusing and fluorescence enhancement without using shear flow. Benefited by the on-chip microreflector, the captured fluorescence intensity was 1.8-fold greater than that of the Si substrate and 8.3-fold greater than that of the SiO2 substrate, greatly improving the detection sensitivity. Combined with the contactless acoustic streaming-based focusing, particle sensing with a coefficient of variation as low as 6.1% was achieved. We also demonstrated the difference between live and dead cells and performed a cell cycle assay using the as-developed microflow cytometry. This monolithic integrated MBAW provides a new type of opto-acoustofluidic system and has the potential to be a highly integrated, highly sensitive flow cytometer for applications such as in vitro diagnostics and point of care.

Light People: Professor Fan Wang

EDITORIAL

My first encounter with Prof. Fan Wang left a profound impression on me. I felt that he was exactly the gentle and courteous scholar depicted in books, well-read in poetry and literature, and exceptionally talented. Through my interactions with Prof. Fan Wang, I deeply sensed his passion for academia and pursuit of knowledge, as well as his warm hospitality, kindness, and gentle demeanor.His thinking is profound and broad, capable of examining issues from various perspectives, and providing inspiration. Prof. Fan Wang is a leading young scientist who actively engages in various academic activities, concerns himself with cutting-edge technological issues, and dedicates himself to overcoming research challenges that can drive advancements and developments in optoelectronics, biophotonics and nanomaterials.Prof. Fan Wang's talent, knowledge, character, and sense of family responsibility all fill me with admiration and respect. Now, let's step into the world of Light People Prof. Fan Wang and together, appreciate the brilliance of his carefree and extraordinary life.

On-Chip Mirror Enhanced Multiphoton Upconversion Super-Resolution Microscopy

Multiphoton upconversion super-resolution microscopy (MPUM) is a promising imaging modality, which can provide increased resolution and penetration depth by using nonlinear near-infrared emission light through the so-called transparent biological window. However, a high excitation power is needed to achieve emission saturation, which increases phototoxicity. Here, we present an approach to realize the nonlinear saturation emission under a low excitation power by a simply designed on-chip mirror. The interference of the local electromagnetic field can easily confine the point spread function to a specific area to increase the excitation efficiency, which enables emission saturation under a lower excitation power. With no additional complexity, the mirror assists to decrease the excitation power by 10-fold and facilities the achievement of a lateral resolution around 35 nm, 1/28th of the excitation wavelength, in imaging of a single nanoparticle on-chip. This method offers a simple solution for super-resolution enhancement by a predesigned on-chip device.

Ultralow Laser Power Three-Dimensional Superresolution Microscopy Based on Digitally Enhanced STED

The resolution of optical microscopes is limited by the optical diffraction limit; in particular, the axial resolution is much lower than the lateral resolution, which hinders the clear distinction of the three-dimensional (3D) structure of cells. Although stimulated emission depletion (STED) superresolution microscopy can break through the optical diffraction limit to achieve 3D superresolution imaging, traditional 3D STED requires high depletion laser power to acquire high-resolution images, which can cause irreversible light damage to biological samples and probes. Therefore, we developed an ultralow laser power 3D STED superresolution imaging method. On the basis of this method, we obtained lateral and axial resolutions of 71 nm and 144 nm, respectively, in fixed cells with 0.65 mW depletion laser power. This method will have broad application prospects in 3D superresolution imaging of living cells.

Axial Scanning Metal-Induced Energy Transfer Microscopy for Extended Range Nanometer-Sectioning Cell Imaging

Nanometer-sectioning optical microscopy has become an indispensable tool in membrane-related biomedical studies. Finally, many nanometer-sectioning imaging schemes, such as variable-angle total internal reflection fluorescence microscopy, metal-induced energy transfer (MIET) imaging, and supercritical-angle fluorescence microscopy have been introduced. However, these methods can measure a single layer of molecules, and the measurement ranges are below 100 nm, which is not large enough to cover the thickness of lamellipodium. This paper proposes an optical imaging scheme that can identify the axial locations of two layers of molecules with an extended measurement range and a nanometer-scale precision by using MIET, axial focal plane scanning, and biexponential analysis in fluorescence lifetime imaging microscopy. The feasibility of the proposed method is demonstrated by measuring an artificial sample of a known structure and the lamellipodium of a human aortic endothelial cell whose thickness ranges from 100 to 450 nm with 18.3 nm precision.

Mirror-enhanced scanning light-field microscopy for long-term high-speed 3D imaging with isotropic resolution

Various biological behaviors can only be observed in 3D at high speed over the long term with low phototoxicity. Light-field microscopy (LFM) provides an elegant compact solution to record 3D information in a tomographic manner simultaneously, which can facilitate high photon efficiency. However, LFM still suffers from the missing-cone problem, leading to degraded axial resolution and ringing effects after deconvolution. Here, we propose a mirror-enhanced scanning LFM (MiSLFM) to achieve long-term high-speed 3D imaging at super-resolved axial resolution with a single objective, by fully exploiting the extended depth of field of LFM with a tilted mirror placed below samples. To establish the unique capabilities of MiSLFM, we performed extensive experiments, we observed various organelle interactions and intercellular interactions in different types of photosensitive cells under extremely low light conditions. Moreover, we demonstrated that superior axial resolution facilitates more robust blood cell tracking in zebrafish larvae at high speed.

Submicrometer perovskite plasmonic lasers at room temperature

Plasmonic lasers attracted interest for their ability to generate coherent light in mode volume smaller than the diffraction limit of photonic lasers. While nanoscale devices in one or two dimensions were demonstrated, it has been difficult to achieve plasmonic lasing with submicrometer cavities in all three dimensions. Here, we demonstrate submicrometer-sized, plasmonic lasers using cesium-lead-bromide perovskite (CsPbBr3) crystals, as small as 0.58 μm by 0.56 μm by 0.32 μm (cuboid) and 0.79 μm by 0.66 μm by 0.18 μm (plate), on polymer-coated gold substrates at room temperature. Our experimental and simulation data obtained from more than 100 plasmonic and photonic devices showed that enhanced optical gain by the Purcell effect, large spontaneous emission factor, and high group index are key elements to efficient plasmonic lasing. The results shed light on the three-dimensional miniaturization of plasmonic lasers.

Axial localization and tracking of self-interference nanoparticles by lateral point spread functions

Sub-diffraction limited localization of fluorescent emitters is a key goal of microscopy imaging. Here, we report that single upconversion nanoparticles, containing multiple emission centres with random orientations, can generate a series of unique, bright and position-sensitive patterns in the spatial domain when placed on top of a mirror. Supported by our numerical simulation, we attribute this effect to the sum of each single emitter’s interference with its own mirror image. As a result, this configuration generates a series of sophisticated far-field point spread functions (PSFs), e.g. in Gaussian, doughnut and archery target shapes, strongly dependent on the phase difference between the emitter and its image. In this way, the axial locations of nanoparticles are transferred into far-field patterns. We demonstrate a real-time distance sensing technology with a localization accuracy of 2.8 nm, according to the atomic force microscope (AFM) characterization values, smaller than 1/350 of the excitation wavelength.

Here, the authors show that single upconversion nanoparticles can generate position-sensitive patterns in the spatial domain when placed on a mirror. They attribute this to the single emitter’s interference with its own mirror image and show how this can be used to obtain axial localisation of the particle.

Stimulated emission depletion microscopy for biological imaging in four dimensions: A review

Stimulated emission depletion (STED) microscopy allows high lateral and axial resolution, long term imaging in living cells. Here we review recent technical advances in STED microscopy, with emphasis on resolution and measurement range of XYZt four dimensions. Different STED technical advances and novel STED probes are discussed with their respective application in biological subcellular imaging. This review may serve as a practical guide for choosing a suitable approach to the advanced STED super-resolution imaging.

Near-infrared double-illumination optical-resolution photoacoustic microscopy

Label-free chemical bond imaging is of great importance in biology and medicine. Photoacoustic imaging at the third near-infrared windows (1600-1870 nm, near-infrared-III) provides a stable molecular vibrational imaging tool for lipid-rich tissue owing to the first overtone transition of the CH bond at 1.7 μm. However, lacking high-energy pulsed laser sources at 1.7 μm and the strong water absorption significantly limit the signal-to-noise ratio of the lipid imaging, especially for thin lipid tissues. To circumvent this barrier, we develop near-infrared-III double-illumination optical-resolution photoacoustic microscopy (DIOR-PAM) for improving the sensitivity of label-free lipid imaging. Using the same laser, DIOR-PAM can enhance the sensitivity by nearly 100%, which we prove in the Monte Carlo simulation. We experimentally demonstrated 50% ~ 100% sensitivity enhancements on nonbiological and biological lipid-rich samples.

Inverse design of optical needles with central zero-intensity points by artificial neural networks

Optical needles with central zero-intensity points have attracted much attention in the field of 3D super-resolution microscopy, optical lithography, optical storage and Raman spectroscopy. Nevertheless, most of the studies create few types of optical needles with central zero-intensity points based on the theory and intuition with time-consuming parameter sweeping and complex pre-select of parameters. Here, we report on the inverse design of optical needles with central zero-intensity points by dipole-based artificial neural networks (DANNs), permitting the creation of needles which are close to specific length and amplitude. The resolution of these optical needles with central zero-intensity points is close to axial diffraction limit (∼1λ). Additionally, the DANNs can realize the inverse design of several types on-axis distributions, such as optical needles and multifocal distributions.

Silicon substrate significantly alters dipole-dipole resolution in coherent microscope

Considering a coherent microscopy setup, influences of the substrate below the sample in the imaging performances are studied, with a focus on high refractive index substrate such as silicon. Analytical expression of 3D full-wave vectorial point spread function, i.e. the dyadic Green's function is derived for the optical setup together with the substrate. Numerical analysis are performed in order to understand and compare magnification, depth of field, and resolution when using silicon substrate versus the conventional glass substrate or usually modelled condition of no substrate. Novel insights are generated about the scope of resolution improvement due to near field effect of the silicon substrate. Importantly, we show that the expected resolution varies greatly with the position of the sources and the substrate interface relative to the focal plane. Both better and worse resolution as compared to glass substrate may be expected with small changes in their positions. Therefore, our studies show that deriving a single indicative number of expected resolution is neither possible nor judicious for the case of silicon substrate.

3D resolution enhancement in saturated competition microscopy

To overcome the diffraction barrier, super-resolution microscopy is contrived and has witnessed scientific developments in varying fields, especially in last few decades, such as stochastic optical reconstruction microscopy, stimulated emission depletion microscopy (STED), mirror-enhanced super-resolution microscopy (MEANS), and fluorescence emission difference microscopy (FED). Recently, saturated competition microscopy (SAC) was developed to realize high sub-diffraction resolution in either fluorescent or non-fluorescent imaging. Compared with STED, SAC features non-constraint in fluorescent dye selection. Nevertheless, the lateral resolution is limited in consideration of photobleaching side effects. Also, the axial resolution enhancement of SAC has not been demonstrated. In this study, a method, combining FED, MEANS, and SAC, is presented to improve the three-dimensional (3D) resolution. The numerical study reveals that the lateral resolution is close to 0.085λ and axial resolution can be enhanced to 0.184λ. In addition, the SNR is improved simultaneously. The availability to improve 3D resolution of SAC is believed to be significant for biological imaging in the future.

Advances of super-resolution fluorescence polarization microscopy and its applications in life sciences

Fluorescence polarization microscopy (FPM) analyzes both intensity and orientation of fluorescence dipole, and reflects the structural specificity of target molecules. It has become an important tool for studying protein organization, orientational order, and structural changes in cells. However, suffering from optical diffraction limit, conventional FPM has low orientation resolution and observation accuracy, as the polarization information is averaged by multiple fluorescent molecules within a diffraction-limited volume. Recently, novel super-resolution FPMs have been developed to break the diffraction barrier. In this review, we will introduce the recent progress to achieve sub-diffraction determination of dipole orientation. Biological applications, based on polarization analysis of fluorescence dipole, are also summarized, with focus on chromophore-target molecule interaction and molecular organization.

Low power charge state depletion nanoscopy of the defect in diamonds with a pulsed laser excitation

Two-photon charge state conversion has been utilized to improve the spatial resolution of the sensing and imaging with the nitrogen vacancy (NV) center in diamonds. Here, we studied the charge state conversion of the NV center under picosecond pulsed laser excitation. With the same average power, the charge state conversion rate can be improved approximately 24 times by reducing the repetition rate of the laser pulse from 80 to 1 MHz. Subsequently, a pulsed laser with a low repetition rate was applied for the super-resolution charge state depletion microscopy of the NV center. The average power of the depletion laser was reduced approximately 5 times. It can decrease the optical heating, which affects the accuracy and sensitivity of sensing. With the assistance of an additional near-infrared laser, a resolution of 12 nm was obtained with 1 mW depletion laser power. Combined with spin manipulation, we expect our results can be used for the development of a diffraction-unlimited NV center sensing.

Single-cell biomagnifier for optical nanoscopes and nanotweezers

Optical microscopes and optical tweezers, which were invented to image and manipulate microscale objects, have revolutionized cellular and molecular biology. However, the optical resolution is hampered by the diffraction limit; thus, optical microscopes and optical tweezers cannot be directly used to image and manipulate nano-objects. The emerging plasmonic/photonic nanoscopes and nanotweezers can achieve nanometer resolution, but the high-index material structures will easily cause mechanical and photothermal damage to biospecimens. Here, we demonstrate subdiffraction-limit imaging and manipulation of nano-objects by a noninvasive device that was constructed by trapping a cell on a fiber tip. The trapped cell, acting as a biomagnifier, could magnify nanostructures with a resolution of 100 nm (λ/5.5) under white-light microscopy. The focus of the biomagnifier formed a nano-optical trap that allowed precise manipulation of an individual nanoparticle with a radius of 50 nm. This biomagnifier provides a high-precision tool for optical imaging, sensing, and assembly of bionanomaterials.

SyncRGB-FLIM: synchronous fluorescence imaging of red, green and blue dyes enabled by ultra-broadband few-cycle laser excitation and fluorescence lifetime detection

We demonstrate for the first time that an ultra-broadband 7 femtosecond (fs) few-cycle laser can be used for multicolor nonlinear imaging in a single channel detection geometry, when employing a time-resolved fluorescence detection scheme. On a multi-chromophore-labelled cell sample we show that the few-cycle laser can efficiently excite the multiple chromophores over a >400 nm two-photon absorption range. By combining the few-cycle laser excitation with time-correlated single-photon counting (TCSPC) detection to record two-photon fluorescence lifetime imaging microscopy (FLIM) images, the localization of different chromophores in the cell can be identified based on their fluorescence decay properties. The novel SyncRGB-FLIM multi-color bioimaging technique opens the possibility of real-time protein-protein interaction studies, where its single-scan operation translates into reduced laser exposure of the sample, resulting in more photoprotective conditions for biological specimens.

Sharpening emitter localization in front of a tuned mirror

Single-molecule localization microscopy (SMLM) aims for maximized precision and a high signal-to-noise ratio¹. Both features can be provided by placing the emitter in front of a metal-dielectric nanocoating that acts as a tuned mirror^2-4. Here, we demonstrate that a higher photon yield at a lower background on biocompatible metal-dielectric nanocoatings substantially improves SMLM performance and increases the localization precision by up to a factor of two. The resolution improvement relies solely on easy-to-fabricate nanocoatings on standard glass coverslips and is spectrally and spatially tunable by the layer design and wavelength, as experimentally demonstrated for dual-color SMLM in cells.

Planar Diffractive Lenses: Fundamentals, Functionalities, and Applications

Traditional objective lenses in modern microscopy, based on the refraction of light, are restricted by the Rayleigh diffraction limit. The existing methods to overcome this limit can be categorized into near-field (e.g., scanning near-field optical microscopy, superlens, microsphere lens) and far-field (e.g., stimulated emission depletion microscopy, photoactivated localization microscopy, stochastic optical reconstruction microscopy) approaches. However, they either operate in the challenging near-field mode or there is the need to label samples in biology. Recently, through manipulation of the diffraction of light with binary masks or gradient metasurfaces, some miniaturized and planar lenses have been reported with intriguing functionalities such as ultrahigh numerical aperture, large depth of focus, and subdiffraction-limit focusing in far-field, which provides a viable solution for the label-free superresolution imaging. Here, the recent advances in planar diffractive lenses (PDLs) are reviewed from a united theoretical account on diffraction-based focusing optics, and the underlying physics of nanofocusing via constructive or destructive interference is revealed. Various approaches of realizing PDLs are introduced in terms of their unique performances and interpreted by using optical aberration theory. Furthermore, a detailed tutorial about applying these planar lenses in nanoimaging is provided, followed by an outlook regarding future development toward practical applications.

Low-Saturation-Intensity, High-Photostability, and High-Resolution STED Nanoscopy Assisted by CsPbBr3 Quantum Dots

Stimulated emission depletion (STED) nanoscopy is one of the most promising super-resolution imaging techniques for microstructure imaging. Commercial CdSe@ZnS quantum dots are used as STED probes and ≈50 nm lateral resolution is obtained. Compared with other quantum dots, perovskite CsPbBr₃ nanoparticles (NPs) possess higher photoluminescence quantum yield and larger absorption cross-section, making them a more effective probe for STED nanoscopy. In this study, CsPbBr₃ NPs are used as probes for STED nanoscopy imaging. The fluorescence intensity of the CsPbBr₃ sample is hardly weakened at all after 200 min irradiation with a 39.8 mW depletion laser, indicating excellent photobleaching resistance of the CsPbBr₃ NPs. The saturation intensity of the CsPbBr₃ NPs is extremely low and estimated to be only 0.4 mW (0.126 MW cm^-2 ). Finally, an ultrahigh lateral resolution of 20.6 nm is obtained for a single nanoparticle under 27.5 mW STED laser irradiation in CsPbBr₃ -based STED nanoscopy imaging, which is a tenfold improvement compared with confocal microscopy. Because of its high fluorescence stability and ultrahigh resolution under lower depletion power, CsPbBr₃ -assisted STED nanoscopy has great potential to investigate microstructures that require super-resolution and long-term imaging.

Fast photoacoustic imaging systems using pulsed laser diodes: a review

Photoacoustic imaging (PAI) is a newly emerging imaging modality for preclinical and clinical applications. The conventional PAI systems use Q-switched Nd:YAG/OPO (Optical Parametric Oscillator) nanosecond lasers as excitation sources. Such lasers are expensive, bulky, and imaging speed is limited because of low pulse repetition rate. In recent years, the semiconductor laser technology has advanced to generate high-repetitions rate near-infrared pulsed lasers diodes (PLDs) which are reliable, less-expensive, hand-held, and light-weight, about 200 g. In this article, we review the development and demonstration of PLD based PAI systems for preclinical and clinical applications reported in recent years.

New design for highly durable infrared-reflective coatings

The fundamental challenge in designing durable infrared-reflective coatings is achieving the ideal combination of both high reflectivity and durability. Satisfying these competing demands is traditionally achieved by deposition of durable layers on highly reflective metals. We overturn the traditional logic of 'first reflectivity and then durability' and propose an alternative of 'first durability and then reflectivity': First, a transition-metal compound is selected as a durable base; then its reflectivity is improved by incorporating silver/gold to form an alloy or by overcoating a multilayer stack. Two validation experiments prove that the new strategy works extremely well: the coatings thus obtained have infrared reflectivities close to that of aluminum, and their hardness and acid and salt corrosion resistances are 27-50, 400-1 500 and 7 500-25 000 times that of aluminum. The traditional mirror coating (e.g., Al/SiO2 films) is more suitable for moderate environments, while our mirror coating that was obtained by the new strategy (e.g., an Ag-doped hafnium nitride film) is more suitable for harsh environments, such as ones with dust, windblown sand, moisture, acid rain or salt fog. This work opens up new opportunities for highly durable infrared-reflective coatings and rejuvenates the study of transition metal compounds in a completely new area of optics.

Widefield standing wave microscopy of red blood cell membrane morphology with high temporal resolution

We report the first demonstration of widefield standing wave (SW) microscopy of fluorescently labelled red blood cells at high speeds that allow for the rapid imaging of membrane deformations. Using existing and custom MATLAB functions, we also present a method to generate 2D and 3D reconstructions of the SW data for improved visualization of the cell. We compare our technique with standard widefield epifluorescence imaging and show that the SW technique not only reveals more topographical information about the specimen but does so without increasing toxicity or the rate of photobleaching and could make this a powerful technique for the diagnosis or study of red blood cell morphology and biomechanical characteristics.

Recent research on stimulated emission depletion microscopy for reducing photobleaching

Stimulated emission depletion (STED) microscopy is a useful tool in investigation for super-resolution realm. By silencing the peripheral fluorophores of the excited spot, leaving only the very centre zone vigorous for fluorescence, the effective point spread function (PSF) could be immensely squeezed and subcellular structures, such as organelles, become discernable. Nevertheless, because of the low cross-section of stimulated emission and the short fluorescence lifetime, the depletion power density has to be extremely higher than the excitation power density and molecules are exposed in high risk of photobleaching. The existence of photobleaching greatly limits the research of STED in achieving higher resolution and more delicate imaging quality, as well as long-term and dynamic observation. Since the first experimental implementation of STED microscopy, researchers have lift out variety of methods and techniques to alleviate the problem. This paper would present some researches via conventional methods which have been explored and utilised relatively thoroughly, such as fast scanning, time-gating, two-photon excitation (TPE), triplet relaxation (T-Rex) and background suppression. Alternatively, several up-to-date techniques, especially adaptive illumination, would also be unveiled for discussion in this paper. The contrast and discussion of these modalities would play an important role in ameliorating the research of STED microscopy.

Precisely Tailoring Upconversion Dynamics via Energy Migration in Core-Shell Nanostructures

Upconversion emission dynamics have long been believed to be determined by the activator and its interaction with neighboring sensitizers. Herein this assumption is, however, shown to be invalid for nanostructures. We demonstrate that excitation energy migration greatly affects upconversion emission dynamics. "Dopant ions' spatial separation" nanostructures are designed as model systems and the intimate link between the random nature of energy migration and upconversion emission time behavior is unraveled by theoretical modelling and confirmed spectroscopically. Based on this new fundamental insight, we have successfully realized fine control of upconversion emission time behavior (either rise or decay process) by tuning the energy migration paths in various specifically designed nanostructures. This result is significant for applications of this type of materials in super resolution spectroscopy, high-density data storage, anti-counterfeiting, and biological imaging.

Optimizing Nonlinear Optical Visibility of Two-Dimensional Materials

Two-dimensional (2D) materials have attracted broad research interests across various nonlinear optical (NLO) studies, including nonlinear photoluminescence (NPL), second harmonic generation (SHG), transient absorption (TA), and so forth. These studies have unveiled important features and information of 2D materials, such as in grain boundaries, defects, and crystal orientations. However, as most research studies focused on the intrinsic NLO processes, little attention has been paid to the substrates underneath. Here, we discovered that the NLO signal depends significantly on the thickness of SiO₂ in SiO₂/Si substrates. A 40-fold enhancement of the NPL signal of graphene was observed when the SiO₂ thickness was varied from 270 to 125 nm under 800 nm excitation. We systematically studied the NPL intensity of graphene on three different SiO₂ thicknesses within a pump wavelength range of 800-1100 nm. The results agreed with a numerical model based on back reflection and interference. Furthermore, we have extended our measurements to include TA and SHG of graphene and MoS₂, confirming that SiO₂ thickness has similar effects on all of the three major types of NLO signals. Our results will serve as an important guidance for choosing the optimum substrates to conduct NLO research studies on 2D materials.

Multicolor Super-resolution Fluorescence Microscopy with Blue and Carmine Small Photoblinking Polymer Dots

Advances in the development of small photoblinking semiconducting polymer dots (Pdots) have attracted great interest for use in super-resolution microscopy. However, multicolor super-resolution imaging using conventional small photoblinking Pdots remains a challenge due to their limited color choice, broad emission spectrum, and heavy spectrum crosstalk. Here, we introduce two types of small photoblinking Pdots with different colors and relatively narrow emission spectra: blue PFO Pdots and carmine PFTBT5 Pdots for blinking-based statistical nanoscopy. Both of these probes feature ultrahigh single-particle brightness, very strong photostability, superior biocompatibility, and robust fluorescence fluctuation. In addition, these small photoblinking Pdots serve as excellent labels for dual-color super-resolution optical fluctuation imaging (SOFI) of specific subcellular structures, indicating their promise for long-term multicolor SOFI nanoscopy with high spatiotemporal resolution.

Axial sub-Fourier focusing of an optical beam

We demonstrate experimentally the generation of an optical beam having an axial focusing that is narrower than the Fourier limit. The beam is constructed from a superposition of Bessel beams with different longitudinal wave vectors, realizing a super-oscillatory axial intensity distribution. Such beams can be useful for microscopy and for optical particle manipulation.

Super-resolution imaging of a 2.5 kb non-repetitive DNA in situ in the nuclear genome using molecular beacon probes

High-resolution visualization of short non-repetitive DNA in situ in the nuclear genome is essential for studying looping interactions and chromatin organization in single cells. Recent advances in fluorescence in situ hybridization (FISH) using Oligopaint probes have enabled super-resolution imaging of genomic domains with a resolution limit of 4.9 kb. To target shorter elements, we developed a simple FISH method that uses molecular beacon (MB) probes to facilitate the probe-target binding, while minimizing non-specific fluorescence. We used three-dimensional stochastic optical reconstruction microscopy (3D-STORM) with optimized imaging conditions to efficiently distinguish sparsely distributed Alexa-647 from background cellular autofluorescence. Utilizing 3D-STORM and only 29–34 individual MB probes, we observed 3D fine-scale nanostructures of 2.5 kb integrated or endogenous unique DNA in situ in human or mouse genome, respectively. We demonstrated our MB-based FISH method was capable of visualizing the so far shortest non-repetitive genomic sequence in 3D at super-resolution.

DOI:http://dx.doi.org/10.7554/eLife.21660.001

Meta-nanocavity model for dynamic super-resolution fluorescent imaging based on the plasmonic structure illumination microscopy method

Biological research requires dynamic and wide-field optical microscopy with resolution down to nanometer to study the biological process in a sub-cell or single molecular level. To address this issue, we propose a dynamic wide-field optical nanoimaging method based on a meta-nanocavity platform (MNCP) model which can be incorporated in micro/nano-fluidic systems so that the samples to be observed can be confined in a nano-scale space for the ease of imaging. It is found that this platform can support standing wave surface plasmons (SW-SPs) interference pattern with a period of 105 nm for a 532 nm incident wavelength. Furthermore, the potential application of the NCP for wide-field super-resolution imaging was discussed and the simulation results show that an imaging resolution of sub-80 nm can be achieved.

Axial super-resolution evanescent wave tomography

Optical tomographic reconstruction of a three-dimensional (3D) nanoscale specimen is hindered by the axial diffraction limit, which is 2-3 times worse than the focal plane resolution. We propose and experimentally demonstrate an axial super-resolution evanescent wave tomography method that enables the use of regular evanescent wave microscopes like the total internal reflection fluorescence microscope beyond surface imaging and achieve a tomographic reconstruction with axial super-resolution. Our proposed method based on Fourier reconstruction achieves axial super-resolution by extracting information from multiple sets of 3D fluorescence images when the sample is illuminated by an evanescent wave. We propose a procedure to extract super-resolution features from the incremental penetration of an evanescent wave and support our theory by one-dimensional (along the optical axis) and 3D simulations. We validate our claims by experimentally demonstrating tomographic reconstruction of microtubules in HeLa cells with an axial resolution of ∼130  nm. Our method does not require any additional optical components or sample preparation. The proposed method can be combined with focal plane super-resolution techniques like stochastic optical reconstruction microscopy and can also be adapted for THz and microwave near-field tomography.

Super-resolution dipole orientation mapping via polarization demodulation

Fluorescence polarization microscopy (FPM) aims to detect the dipole orientation of fluorophores and to resolve structural information for labeled organelles via wide-field or confocal microscopy. Conventional FPM often suffers from the presence of a large number of molecules within the diffraction-limited volume, with averaged fluorescence polarization collected from a group of dipoles with different orientations. Here, we apply sparse deconvolution and least-squares estimation to fluorescence polarization modulation data and demonstrate a super-resolution dipole orientation mapping (SDOM) method that resolves the effective dipole orientation from a much smaller number of fluorescent molecules within a sub-diffraction focal area. We further apply this method to resolve structural details in both fixed and live cells. For the first time, we show that different borders of a dendritic spine neck exhibit a heterogeneous distribution of dipole orientation. Furthermore, we illustrate that the dipole is always perpendicular to the direction of actin filaments in mammalian kidney cells and radially distributed in the hourglass structure of the septin protein under specific labelling. The accuracy of the dipole orientation can be further mapped using the orientation uniform factor, which shows the superiority of SDOM compared with its wide-field counterpart as the number of molecules is decreased within the smaller focal area. Using the inherent feature of the orientation dipole, the SDOM technique, with its fast imaging speed (at sub-second scale), can be applied to a broad range of fluorescently labeled biological systems to simultaneously resolve the valuable dipole orientation information with super-resolution imaging.

Controlling red upconversion luminescence in Gd2O3:Yb3+–Er3+nanoparticles by changing the different atmosphere

Upconversion luminescence properties were investigated by emission intensityvs.excitation power (double logarithmic relationship) and temperature dependent emission spectroscopy.