Rules of the road for insect gene drive research and testing

Transgene removal using an in cis programmed homing endonuclease via single-strand annealing in the mosquito Aedes aegypti

While gene drive strategies have been proposed to aid in the control of mosquito-borne diseases, additional genome engineering technologies may be required to establish a defined end-of-product-life timeline. We previously demonstrated that single-strand annealing (SSA) was sufficient to program the scarless elimination of a transgene while restoring a disrupted gene in the disease vector mosquito Aedes aegypti. Here, we extend these findings by establishing that complete transgene removal (four gene cassettes comprising ~8-kb) can be programmed in cis. Reducing the length of the direct repeat from 700-bp to 200-bp reduces, but does not eliminate, SSA activity. In contrast, increasing direct repeat length to 1.5-kb does not increase SSA rates, suggesting diminishing returns above a certain threshold size. Finally, we show that while the homing endonuclease Y2-I-AniI triggered both SSA and NHEJ at significantly higher rates than I-SceI at one genomic locus (P5-EGFP), repair events are heavily skewed towards NHEJ at another locus (kmo), suggesting the nuclease used and the genomic region targeted have a substantial influence on repair outcomes. Taken together, this work establishes the feasibility of engineering temporary transgenes in disease vector mosquitoes, while providing critical details concerning important operational parameters.

Modelling daisy quorum drive: A short-term bridge across engineered fitness valleys

Engineered gene-drive techniques for population modification and/or suppression have the potential for tackling complex challenges, including reducing the spread of diseases and invasive species. Gene-drive systems with low threshold frequencies for invasion, such as homing-based gene drive, require initially few transgenic individuals to spread and are therefore easy to introduce. The self-propelled behavior of such drives presents a double-edged sword, however, as the low threshold can allow transgenic elements to expand beyond a target population. By contrast, systems where a high threshold frequency must be reached before alleles can spread-above a fitness valley-are less susceptible to spillover but require introduction at a high frequency. We model a proposed drive system, called "daisy quorum drive," that transitions over time from a low-threshold daisy-chain system (involving homing-based gene drive such as CRISPR-Cas9) to a high-threshold fitness-valley system (requiring a high frequency-a "quorum"-to spread). The daisy-chain construct temporarily lowers the high thresholds required for spread of the fitness-valley construct, facilitating use in a wide variety of species that are challenging to breed and release in large numbers. Because elements in the daisy chain only drive subsequent elements in the chain and not themselves and also carry deleterious alleles ("drive load"), the daisy chain is expected to exhaust itself, removing all CRISPR elements and leaving only the high-threshold fitness-valley construct, whose spread is more spatially restricted. Developing and analyzing both discrete patch and continuous space models, we explore how various attributes of daisy quorum drive affect the chance of modifying local population characteristics and the risk that transgenic elements expand beyond a target area. We also briefly explore daisy quorum drive when population suppression is the goal. We find that daisy quorum drive can provide a promising bridge between gene-drive and fitness-valley constructs, allowing spread from a low frequency in the short term and better containment in the long term, without requiring repeated introductions or persistence of CRISPR elements.

Manipulating the Destiny of Wild Populations Using CRISPR

Genetic biocontrol aims to suppress or modify populations of species to protect public health, agriculture, and biodiversity. Advancements in genome engineering technologies have fueled a surge in research in this field, with one gene editing technology, CRISPR, leading the charge. This review focuses on the current state of CRISPR technologies for genetic biocontrol of pests and highlights the progress and ongoing challenges of using these approaches.

Incorporating ecology into gene drive modelling

Gene drive technology, in which fast-spreading engineered drive alleles are introduced into wild populations, represents a promising new tool in the fight against vector-borne diseases, agricultural pests and invasive species. Due to the risks involved, gene drives have so far only been tested in laboratory settings while their population-level behaviour is mainly studied using mathematical and computational models. The spread of a gene drive is a rapid evolutionary process that occurs over timescales similar to many ecological processes. This can potentially generate strong eco-evolutionary feedback that could profoundly affect the dynamics and outcome of a gene drive release. We, therefore, argue for the importance of incorporating ecological features into gene drive models. We describe the key ecological features that could affect gene drive behaviour, such as population structure, life-history, environmental variation and mode of selection. We review previous gene drive modelling efforts and identify areas where further research is needed. As gene drive technology approaches the level of field experimentation, it is crucial to evaluate gene drive dynamics, potential outcomes, and risks realistically by including ecological processes.

Repurposing prokaryotic clustered regularly interspaced short palindromic repeats-Cas adaptive immune system to combat antimicrobial resistance

Despite achieving unparalleled progress in the field of science and technology, the global health community is still threatened by the looming pressure of infectious diseases. One of the greatest challenges is the rise in infections by antibiotic-resistant microorganisms. The misuse of antibiotics has led to the present circumstances, and there is seemingly no solution. There is imminent pressure to develop new antibacterial therapies to curb the rise and spread of multidrug resistance. Clustered regularly interspaced short palindromic repeats (CRISPR)-Cas, having immense potential as a gene-editing tool, has gained considerable attention as an alternative antibacterial therapy. Strategies, aiming to either eliminate pathogenic strains or to restore sensitivity to antibiotics, are the main focus of research. This review deals with the development of CRISPR-Cas antimicrobials and their delivery challenges.

Evaluating the Mating Competency of Genetically Modified Male Mosquitoes in Laboratory Conditions

Efforts to eradicate mosquito-borne diseases have increased the demand for genetic control strategies, many of which involve the release of genetically modified (GM) mosquito males into natural populations. The first hurdle for GM males is to compete with their wild-type counterparts for access to females. Here, we introduce an eye color-based mating assay, in which both Lvp wild-type and kynurenine 3-monooxygenase (kmo)-null males compete for access to kmo-null females, and therefore the eye color phenotype (black or white) of the progeny is dependent on the parental mating pair. A series of tests addressed that male mating competitiveness between the two strains can significantly be influenced by adult density, light intensity, and mating duration. Interestingly, the mating competitiveness of males was not correlated with body size, which was negatively influenced by a high larval density. Lastly, this eye color-associated assay was applied to characterize GM mosquitoes in their mating competitiveness, establishing this method as a fast and precise way of benchmarking this fitness parameter for laboratory-raised males.

Use of Insect Promoters in Genetic Engineering to Control Mosquito-Borne Diseases

Mosquito transgenesis and gene-drive technologies provide the basis for developing promising new tools for vector-borne disease prevention by either suppressing wild mosquito populations or reducing their capacity from transmitting pathogens. Many studies of the regulatory DNA and promoters of genes with robust sex-, tissue- and stage-specific expression profiles have supported the development of new tools and strategies that could bring mosquito-borne diseases under control. Although the list of regulatory elements available is significant, only a limited set of those can reliably drive spatial-temporal expression. Here, we review the advances in our ability to express beneficial and other genes in mosquitoes, and highlight the information needed for the development of new mosquito-control and anti-disease strategies.

Lessons learned from the introduction of genetically engineered crops: relevance to gene drive deployment in Africa

The application of gene drives to achieve public health goals, such as the suppression of Anopheles gambiae populations, or altering their ability to sustain Plasmodium spp. infections, has received much attention from researchers. If successful, this genetic tool can contribute greatly to the wellbeing of people in regions severely affected by malaria. However, engineered gene drives are a product of genetic engineering, and the experience to date, gained through the deployment of genetically engineered (GE) crops, is that GE technology has had difficulty receiving public acceptance in Africa, a key region for the deployment of gene drives. The history of GE crop deployment in this region provides good lessons for the deployment of gene drives as well. GE crops have been in commercial production for 24 years, since the planting of the first GE soybean crop in 1996. During this time, regulatory approvals and farmer adoption of these crops has grown rapidly in the Americas, and to a lesser extent in Asia. Their safety has been recognized by numerous scientific organizations. Economic and health benefits have been well documented in the countries that have grown them. However, only one transgenic crop event is being grown in Europe, and only in two countries in that region. Europe has been extremely opposed to GE crops, due in large part to the public view of agriculture that opposes "industrial" farming. This attitude is reflected in a highly precautionary regulatory and policy environment, which has highly influenced how African countries have dealt with GE technology and are likely to be applied to future genetic technologies, including gene drives. Furthermore, a mistrust of government regulatory agencies, the publication of scientific reports claiming adverse effects of GE crops, the involvement of corporations as the first GE crop developers, the lack of identifiable consumer benefit, and low public understanding of the technology further contributed to the lack of acceptance. Coupled with more emotionally impactful messaging to the public by opposition groups and the general tendency of negative messages to be more credible than positive ones, GE crops failed to gain a place in European agriculture, thus influencing African acceptance and government policy. From this experience, the following lessons have been learned that would apply to the deployment of gene drives, in Africa:It will be important to establish trust in those who are developing the technology, as well as in those who are making regulatory decisions. Engagement of the community, where those who are involved are able to make genuine contributions to the decision-making process, are necessary to achieve that trust. The use of tools to facilitate participatory modeling could be considered in order to enhance current community engagement efforts.Trusted, accurate information on gene drives should be made available to the general public, journalists, and scientists who are not connected with the field. Those sources of information should also be able to summarize and analyze important scientific results and emerging issues in the field in order to place those developments in the proper context. Engagement should involve more opportunities for participation of stakeholders in conceptualizing, planning, and decision-making.Diversifying the source of funding for gene drive research and development, particularly by participation of countries and regional bodies, would show that country or regional interests are represented.Efforts by developers and neutral groups to provide the public and decisionmakers with a more thorough understanding of the benefits and risks of this technology, especially to local communities, would help them reach more informed decisions.A better understanding of gene drive technology can be fostered by governments, as part of established biosafety policy in several African countries. Developers and neutral groups could also be helpful in increasing public understanding of the technology of genetic engineering, including gene drives.Effective messaging to balance the messaging of groups opposed to gene drives is needed. These messages should be not only factual but also have emotional and intuitive appeal.

Propagation of seminal toxins through binary expression gene drives could suppress populations

Gene drives can be highly effective in controlling a target population by disrupting a female fertility gene. To spread across a population, these drives require that disrupted alleles be largely recessive so as not to impose too high of a fitness penalty. We argue that this restriction may be relaxed by using a double gene drive design to spread a split binary expression system. One drive carries a dominant lethal/toxic effector alone and the other a transactivator factor, without which the effector will not act. Only after the drives reach sufficiently high frequencies would individuals have the chance to inherit both system components and the effector be expressed. We explore through mathematical modeling the potential of this design to spread dominant lethal/toxic alleles and suppress populations. We show that this system could be implemented to spread engineered seminal proteins designed to kill females, making it highly effective against polyandrous populations.

Stakeholder engagement to inform the risk assessment and governance of gene drive technology to manage spotted-wing drosophila

Emerging biotechnologies, such as gene drive technology, are increasingly being proposed to manage a variety of pests and invasive species. As one method of genetic biocontrol, gene drive technology is currently being developed to manage the invasive agricultural pest spotted-wing drosophila (Drosophila suzukii, SWD). While there have been calls for stakeholder engagement on gene drive technology, there has been a lack of empirical work, especially concerning stakeholder engagement to inform risk assessment. To help address this gap and inform future risk assessments and governance decisions for SWD gene drive technology, we conducted a survey of 184 SWD stakeholders to explore how they define and prioritize potential benefits and potential adverse effects from proposed SWD gene drive technology. We found that stakeholders considered the most important potential benefits of SWD gene drive technology to be: 1) Decrease in the quantity or toxicity of pesticides used, and 2) Decrease in SWD populations. Stakeholders were most concerned about the potential adverse effects of: 1) Decrease in beneficial insects, 2) Increase in non-SWD secondary pest infestations, and 3) Decrease in grower profits. Notably, we found that even stakeholders who expressed support for the use of SWD gene drive technology expressed concerns about potential adverse effects from the technology, emphasizing the need to move past simplistic, dichotomous views of what it means to support or oppose a technology. These findings suggest that instead of focusing on the binary question of whether stakeholders support or oppose SWD gene drive technology, it is more important to identify and assess the factors that are consequential to stakeholder decision making - including, for example, exploring whether and under what conditions key potential adverse effects and potential benefits would result from the use of SWD gene drive technology.

Engineering a self-eliminating transgene in the yellow fever mosquito, Aedes aegypti

Promising genetics-based approaches are being developed to reduce or prevent the transmission of mosquito-vectored diseases. Less clear is how such transgenes can be removed from the environment, a concern that is particularly relevant for highly invasive gene drive transgenes. Here, we lay the groundwork for a transgene removal system based on single-strand annealing (SSA), a eukaryotic DNA repair mechanism. An SSA-based rescuer strain (kmo^RG ) was engineered to have direct repeat sequences (DRs) in the Aedes aegypti kynurenine 3-monooxygenase (kmo) gene flanking the intervening transgenic cargo genes, DsRED and EGFP. Targeted induction of DNA double-strand breaks (DSBs) in the DsRED transgene successfully triggered complete elimination of the entire cargo from the kmo^RG strain, restoring the wild-type kmo gene, and thereby, normal eye pigmentation. Our work establishes the framework for strategies to remove transgene sequences during the evaluation and testing of modified strains for genetics-based mosquito control.

California Residents' Perceptions of Gene Drive Systems to Control Mosquito-Borne Disease

Scientists developing gene drive mosquitoes for vector control must understand how residents of affected areas regard both the problem of mosquito-borne disease and the potential solutions offered by gene drive. This study represents an experiment in public engagement at an early stage of technology development, intended to inform lab scientists about public attitudes toward their research and inspire consideration and conversation about the social ramifications of creating mosquitoes with gene drive. Online focus groups with California residents explored views on mosquito-borne disease risk, current mosquito control methods, and the proposed development and use of different classes of gene drives to control Ae. aegypti. Rather than a dogmatic rejection of genetic engineering or gene drive, many participants expressed pragmatic concerns with cost, control, the ability to narrowly target specific species, and the challenges of mistrust and institutional cooperation. Work like this can inform the alignment of community priorities and the professional priorities of scientists and vector control specialists.

Gene drives gaining speed

Gene drives are selfish genetic elements that are transmitted to progeny at super-Mendelian (>50%) frequencies. Recently developed CRISPR-Cas9-based gene-drive systems are highly efficient in laboratory settings, offering the potential to reduce the prevalence of vector-borne diseases, crop pests and non-native invasive species. However, concerns have been raised regarding the potential unintended impacts of gene-drive systems. This Review summarizes the phenomenal progress in this field, focusing on optimal design features for full-drive elements (drives with linked Cas9 and guide RNA components) that either suppress target mosquito populations or modify them to prevent pathogen transmission, allelic drives for updating genetic elements, mitigating strategies including trans-complementing split-drives and genetic neutralizing elements, and the adaptation of drive technology to other organisms. These scientific advances, combined with ethical and social considerations, will facilitate the transparent and responsible advancement of these technologies towards field implementation.

Containment Practices for Arthropods Modified with Engineered Transgenes Capable of Gene Drive Addendum 1 to the Arthropod Containment Guidelines, Version 3.2

Responsible conduct of research is a cornerstone of rigorous scientific discovery. Institutional committees, independent advisory panels, and expert steering groups are among the frameworks in academia meant to provide guidance and assurances that research activities do not result in harm to the environment, research staff, or public safety. For research involving arthropods of public health importance, several documents currently exist to guide investigators in methodologies to consider for reducing risks from arthropod escape. However, to date, there has been no standardized set of recommendations on containment practices for arthropods modified with engineered transgenes capable of gene drive. This document is meant to serve as a practical reference to fill that gap. Recommendations outlined here address containment considerations when a risk assessment indicates a possibility of establishment of a new arthropod vector species or genetically modified arthropods in the local environment.

Oxitec and MosquitoMate in the United States: lessons for the future of gene drive mosquito control

In response to growing concerns regarding mosquito-borne diseases, scientists are developing novel systems of vector control. Early examples include Oxitec's OX513A genetically-engineered mosquito and MosquitoMate's Wolbachia-infected mosquito, and systems using 'gene-drive' are in development. Systems based on genetic engineering are controversial and institutions around the world are grappling with the question of who should have a say in how such technologies are field-tested and used. Based on media coverage and public records, we created comparative timelines of the efforts of Oxitec and MosquitoMate to navigate federal and local governance and bring their products to market in the United States. We analyze these timelines with particular attention to the role of public input in technology governance. These cases illustrate how governance of technology in the US is diverse, complex, and opaque. Further, the public response to proposed field trials of the Oxitec product highlights inconsistencies between public expectations for governance and actual practice. As gene-drive mosquito control products develop, both federal and local agencies will find their legitimacy tested without a better procedure for transparently integrating public input.

Driving to Safety: CRISPR-Based Genetic Approaches to Reducing Antibiotic Resistance

Bacterial resistance to antibiotics has reached critical levels, skyrocketing in hospitals and the environment and posing a major threat to global public health. The complex and challenging problem of reducing antibiotic resistance (AR) requires a network of both societal and science-based solutions to preserve the most lifesaving pharmaceutical intervention known to medicine. In addition to developing new classes of antibiotics, it is essential to safeguard the clinical efficacy of existing drugs. In this review, we examine the potential application of novel CRISPR-based genetic approaches to reducing AR in both environmental and clinical settings and prolonging the utility of vital antibiotics.

Combating mosquito-borne diseases using genetic control technologies

Mosquito-borne diseases, such as dengue and malaria, pose significant global health burdens. Unfortunately, current control methods based on insecticides and environmental maintenance have fallen short of eliminating the disease burden. Scalable, deployable, genetic-based solutions are sought to reduce the transmission risk of these diseases. Pathogen-blocking Wolbachia bacteria, or genome engineering-based mosquito control strategies including gene drives have been developed to address these problems, both requiring the release of modified mosquitoes into the environment. Here, we review the latest developments, notable similarities, and critical distinctions between these promising technologies and discuss their future applications for mosquito-borne disease control.

Governing Gene Drive Technologies: A Qualitative Interview Study

BACKGROUND

Gene drive technologies (GDTs) bias the inheritance of a genetic element within a population of non-human organisms, promoting its progressive spread across this population. If successful, GDTs may be used to counter intractable problems such as vector-borne diseases. A key issue in the debate on GDTs relates to what governance is appropriate for these technologies. While governance mechanisms for GDTs are to a significant extent proposed and shaped by professional experts, the perspectives of these experts have not been explored in depth.

METHODS

A total of 33 GDT experts from different professional disciplines were interviewed to identify, better understand, and juxtapose their perspectives on GDT governance. The pseudonymized transcripts were analyzed thematically.

RESULTS

Three main themes were identified: (1) engagement of communities, stakeholders, and publics; (2) power dynamics, and (3) decision-making. There was broad consensus amongst respondents that it is important to engage communities, stakeholders, and publics. Nonetheless, respondents had diverging views on the reasons for doing so and the timing and design of engagement. Respondents also outlined complexities and challenges related to engagement. Moreover, they brought up the power dynamics that are present in GDT research. Respondents stressed the importance of preventing the recurrence of historical injustices and reflected on dilemmas regarding whether and to what extent (foreign) researchers can legitimately make demands regarding local governance. Finally, respondents had diverging views on whether decisions about GDTs should be made in the same way as decisions about other environmental interventions, and on the decision-making model that should be used to decide about GDT deployment.

CONCLUSIONS

The insights obtained in this interview study give rise to recommendations for the design and evaluation of GDT governance. Moreover, these insights point to unresolved normative questions that need to be addressed to move from general commitments to concrete obligations.

Potential use of gene drive modified insects against disease vectors, agricultural pests and invasive species poses new challenges for risk assessment

Potential future application of engineered gene drives (GDs), which bias their own inheritance and can spread genetic modifications in wild target populations, has sparked both enthusiasm and concern. Engineered GDs in insects could potentially be used to address long-standing challenges in control of disease vectors, agricultural pests and invasive species, or help to rescue endangered species, and thus provide important public benefits. However, there are concerns that the deliberate environmental release of GD modified insects may pose different or new harms to animal and human health and the wider environment, and raise novel challenges for risk assessment. Risk assessors, risk managers, developers, potential applicants and other stakeholders at many levels are currently discussing whether there is a need to develop new or additional risk assessment guidance for the environmental release of GD modified organisms, including insects. Developing new or additional guidance that is useful and practical is a challenge, especially at an international level, as risk assessors, risk managers and many other stakeholders have different, often contrasting, opinions and perspectives toward the environmental release of GD modified organisms, and on the adequacy of current risk assessment frameworks for such organisms. Here, we offer recommendations to overcome some of the challenges associated with the potential future development of new or additional risk assessment guidance for GD modified insects and provide considerations on areas where further risk assessment guidance may be required.

Optimized CRISPR tools and site-directed transgenesis towards gene drive development in Culex quinquefasciatus mosquitoes

Culex mosquitoes are a global vector for multiple human and animal diseases, including West Nile virus, lymphatic filariasis, and avian malaria, posing a constant threat to public health, livestock, companion animals, and endangered birds. While rising insecticide resistance has threatened the control of Culex mosquitoes, advances in CRISPR genome-editing tools have fostered the development of alternative genetic strategies such as gene drive systems to fight disease vectors. However, though gene-drive technology has quickly progressed in other mosquitoes, advances have been lacking in Culex. Here, we develop a Culex-specific Cas9/gRNA expression toolkit and use site-directed homology-based transgenesis to generate and validate a Culex quinquefasciatus Cas9-expressing line. We show that gRNA scaffold variants improve transgenesis efficiency in both Culex quinquefasciatus and Drosophila melanogaster and boost gene-drive performance in the fruit fly. These findings support future technology development to control Culex mosquitoes and provide valuable insight for improving these tools in other species.

Inherently confinable split-drive systems in Drosophila

CRISPR-based gene-drive systems, which copy themselves via gene conversion mediated by the homology-directed repair (HDR) pathway, have the potential to revolutionize vector control. However, mutant alleles generated by the competing non-homologous end-joining (NHEJ) pathway, resistant to Cas9 cleavage, can interrupt the spread of gene-drive elements. We hypothesized that drives targeting genes essential for viability or reproduction also carrying recoded sequences that restore endogenous gene functionality should benefit from dominantly-acting maternal clearance of NHEJ alleles combined with recessive Mendelian culling processes. Here, we test split gene-drive (sGD) systems in Drosophila melanogaster that are inserted into essential genes required for viability (rab5, rab11, prosalpha2) or fertility (spo11). In single generation crosses, sGDs copy with variable efficiencies and display sex-biased transmission. In multigenerational cage trials, sGDs follow distinct drive trajectories reflecting their differential tendencies to induce target chromosome damage and/or lethal/sterile mosaic Cas9-dependent phenotypes, leading to inherently confinable drive outcomes.

NHEJ alleles and Cas9 remnants after a gene drive introduction are scientific and public concerns. Here, the authors use split drives with recoded rescue elements to target essential genes and minimize the appearance of NHEJ alleles while also leaving no trace of Cas9.

A confinable home-and-rescue gene drive for population modification

Homing-based gene drives, engineered using CRISPR/Cas9, have been proposed to spread desirable genes throughout populations. However, invasion of such drives can be hindered by the accumulation of resistant alleles. To limit this obstacle, we engineer a confinable population modification home-and-rescue (HomeR) drive in Drosophila targeting an essential gene. In our experiments, resistant alleles that disrupt the target gene function were recessive lethal and therefore disadvantaged. We demonstrate that HomeR can achieve an increase in frequency in population cage experiments, but that fitness costs due to the Cas9 insertion limit drive efficacy. Finally, we conduct mathematical modeling comparing HomeR to contemporary gene drive architectures for population modification over wide ranges of fitness costs, transmission rates, and release regimens. HomeR could potentially be adapted to other species, as a means for safe, confinable, modification of wild populations.

Control of malaria-transmitting mosquitoes using gene drives

Gene drives are selfish genetic elements that can be re-designed to invade a population and they hold tremendous potential for the control of mosquitoes that transmit disease. Much progress has been made recently in demonstrating proof of principle for gene drives able to suppress populations of malarial mosquitoes, or to make them refractory to the Plasmodium parasites they transmit. This has been achieved using CRISPR-based gene drives. In this article, I will discuss the relative merits of this type of gene drive, as well as barriers to its technical development and to its deployment in the field as malaria control. This article is part of the theme issue 'Novel control strategies for mosquito-borne diseases'.

A Code of Ethics for Gene Drive Research

Gene drives hold promise for use in controlling insect vectors of diseases, agricultural pests, and for conservation of ecosystems against invasive species. At the same time, this technology comes with potential risks that include unknown downstream effects on entire ecosystems as well as the accidental or nefarious spread of organisms that carry the gene drive machinery. A code of ethics can be a useful tool for all parties involved in the development and regulation of gene drives and can be used to help ensure that a balanced analysis of risks, benefits, and values is taken into consideration in the interest of society and humanity. We have developed a code of ethics for gene drive research with the hope that this code will encourage the development of an international framework that includes ethical guidance of gene drive research and is incorporated into scientific practice by gaining broad agreement and adherence.

Genetic transformation of mosquitoes by microparticle bombardment

Mosquitoes constitute the major living beings causing human deaths in the world. They are vectors of malaria, yellow fever, dengue, zika, filariases, chikungunya, among other diseases. New strategies to control/eradicate mosquito populations are based on newly developed genetic manipulation techniques. However, genetic transformation of mosquitoes is a major technical bottleneck due to low efficiency, the need of sophisticated equipment, and highly trained personnel. The present report shows the transgenerational genetic transformation of Aedes aegypti, using the particle inflow gun (PIG), by integrating the ecfp gene in the AAEL000582 mosquito gene with the CRISPR-Cas9 technique, achieving a mean efficiency of 44.5% of bombarded individuals (G0) that showed ECFP expression in their tissues, and a mean of 28.5% transformation efficiency measured on G1 individuals. The same transformation technique was used to integrate the egfp/scorpine genes cloned in the Minos transposon pMinHygeGFP into the Anopheles albimanus genome, achieving a mean efficiency of 43.25% of bombarded individuals (G0) that showed EGFP expression in their tissues. Once the technique was standardized, transformation of Ae. aegypti neonate larvae and An. albimanus eggs was achieved when exposed to gold microparticle bombardment. Integration of genes and heterologous protein expression were confirmed by PCR, sequencing, fluorescent microscopy, mass spectrometry, Western blot and dot blot analyses. Transgenerational inheritance of the transgenes was observed only on Ae. aegypti, as all transformed An. albimanus individuals died at the pupal stage of the G0 generation.

Making gene drive biodegradable

Gene drive systems have long been sought to modify mosquito populations and thus combat malaria and dengue. Powerful gene drive systems have been developed in laboratory experiments, but may never be used in practice unless they can be shown to be acceptable through rigorous field-based testing. Such testing is complicated by the anticipated difficulty in removing gene drive transgenes from nature. Here, we consider the inclusion of self-elimination mechanisms into the design of homing-based gene drive transgenes. This approach not only caused the excision of the gene drive transgene, but also generates a transgene-free allele resistant to further action by the gene drive. Strikingly, our models suggest that this mechanism, acting at a modest rate (10%) as part of a single-component system, would be sufficient to cause the rapid reversion of even the most robust homing-based gene drive transgenes, without the need for further remediation. Modelling also suggests that unlike gene drive transgenes themselves, self-eliminating transgene approaches are expected to tolerate substantial rates of failure. Thus, self-elimination technology may permit rigorous field-based testing of gene drives by establishing strict time limits on the existence of gene drive transgenes in nature, rendering them essentially biodegradable.

This article is part of the theme issue ‘Novel control strategies for mosquito-borne diseases'.

Adequacy and sufficiency evaluation of existing EFSA guidelines for the molecular characterisation, environmental risk assessment and post-market environmental monitoring of genetically modified insects containing engineered gene drives

Advances in molecular and synthetic biology are enabling the engineering of gene drives in insects for disease vector/pest control. Engineered gene drives (that bias their own inheritance) can be designed either to suppress interbreeding target populations or modify them with a new genotype. Depending on the engineered gene drive system, theoretically, a genetic modification of interest could spread through target populations and persist indefinitely, or be restricted in its spread or persistence. While research on engineered gene drives and their applications in insects is advancing at a fast pace, it will take several years for technological developments to move to practical applications for deliberate release into the environment. Some gene drive modified insects (GDMIs) have been tested experimentally in the laboratory, but none has been assessed in small-scale confined field trials or in open release trials as yet. There is concern that the deliberate release of GDMIs in the environment may have possible irreversible and unintended consequences. As a proactive measure, the European Food Safety Authority (EFSA) has been requested by the European Commission to review whether its previously published guidelines for the risk assessment of genetically modified animals (EFSA, 2012 and 2013), including insects (GMIs), are adequate and sufficient for GDMIs, primarily disease vectors, agricultural pests and invasive species, for deliberate release into the environment. Under this mandate, EFSA was not requested to develop risk assessment guidelines for GDMIs. In this Scientific Opinion, the Panel on Genetically Modified Organisms (GMO) concludes that EFSA's guidelines are adequate, but insufficient for the molecular characterisation (MC), environmental risk assessment (ERA) and post-market environmental monitoring (PMEM) of GDMIs. While the MC,ERA and PMEM of GDMIs can build on the existing risk assessment framework for GMIs that do not contain engineered gene drives, there are specific areas where further guidance is needed for GDMIs.

Active Genetic Neutralizing Elements for Halting or Deleting Gene Drives

CRISPR-Cas9-based gene drive systems possess the inherent capacity to spread progressively throughout target populations. Here we describe two self-copying (or active) guide RNA-only genetic elements, called e-CHACRs and ERACRs. These elements use Cas9 produced in trans by a gene drive either to inactivate the cas9 transgene (e-CHACRs) or to delete and replace the gene drive (ERACRs). e-CHACRs can be inserted at various genomic locations and carry two or more gRNAs, the first copying the e-CHACR and the second mutating and inactivating the cas9 transgene. Alternatively, ERACRs are inserted at the same genomic location as a gene drive, carrying two gRNAs that cut on either side of the gene drive to excise it. e-CHACRs efficiently inactivate Cas9 and can drive to completion in cage experiments. Similarly, ERACRs, particularly those carrying a recoded cDNA-restoring endogenous gene activity, can drive reliably to fully replace a gene drive. We compare the strengths of these two systems.

A Cross-Sectional Survey of Biosafety Professionals Regarding Genetically Modified Insects

BACKGROUND

Genetic technologies such as gene editing and gene drive create challenges for existing frameworks used to assess risk and make regulatory determinations by governments and institutions. Insect genetic technologies including transgenics, gene editing, and gene drive may be particularly challenging because of the large and increasing number of insect species being genetically modified and the degree of familiarity with these organisms and technologies by biosafety officials charged with making containment decisions.

METHODS

An anonymous online survey of biosafety professionals was distributed to the membership of ABSA International, a global society of biosafety professionals, to investigate their perspectives on their preparedness to meet these new challenges.

RESULTS

Existing guidance used to make containment decisions for nongenetically modified insects was widely seen as adequate, and most respondents thought the available guidance for making containment decisions for genetically modified insects with and without gene drives was inadequate. Most respondents reported having less confidence in their decisions concerning containment of genetically modified insects compared to decisions involving genetically modified microbes, (noninsect) animals, and plants.

CONCLUSIONS

These results reveal a need for additional support for biosafety professionals to improve the quality of and confidence in containment decisions regarding genetically modified insects with and without gene drive. These needs might be addressed by increasing training, updating existing guidance, creating new guidance, and creating a third-party accreditation entity to support institutions. Sixty percent of the respondents said they either would or might use a voluntary third-party accreditation service to support insect containment decisions.

Progress towards engineering gene drives for population control

Vector-borne diseases, such as dengue, Zika and malaria, are a major cause of morbidity and mortality worldwide. These diseases have proven difficult to control and currently available management tools are insufficient to eliminate them in many regions. Gene drives have the potential to revolutionize vector-borne disease control. This suite of technologies has advanced rapidly in recent years as a result of the availability of new, more efficient gene editing technologies. Gene drives can favorably bias the inheritance of a linked disease-refractory gene, which could possibly be exploited (i) to generate a vector population incapable of transmitting disease or (ii) to disrupt an essential gene for viability or fertility, which could eventually eliminate a population. Importantly, gene drives vary in characteristics such as their transmission efficiency, confinability and reversibility, and their potential to develop resistance to the drive mechanism. Here, we discuss recent advancements in the gene drive field, and contrast the benefits and limitations of a variety of technologies, as well as approaches to overcome these limitations. We also discuss the current state of each gene drive technology and the technical considerations that need to be addressed on the pathway to field implementation. While there are still many obstacles to overcome, recent progress has brought us closer than ever before to genetic-based vector modification as a tool to support vector-borne disease elimination efforts worldwide.

Assessment of a Split Homing Based Gene Drive for Efficient Knockout of Multiple Genes

Homing based gene drives (HGD) possess the potential to spread linked cargo genes into natural populations and are poised to revolutionize population control of animals. Given that host encoded genes have been identified that are important for pathogen transmission, targeting these genes using guide RNAs as cargo genes linked to drives may provide a robust method to prevent disease transmission. However, effectiveness of the inclusion of additional guide RNAs that target separate genes has not been thoroughly explored. To test this approach, we generated a split-HGD in Drosophila melanogaster that encoded a drive linked effector consisting of a second gRNA engineered to target a separate host-encoded gene, which we term a gRNA-mediated effector (GME). This design enabled us to assess homing and knockout efficiencies of two target genes simultaneously, and also explore the timing and tissue specificity of Cas9 expression on cleavage/homing rates. We demonstrate that inclusion of a GME can result in high efficiency of disruption of both genes during super-Mendelian propagation of split-HGD. Furthermore, both genes were knocked out one generation earlier than expected indicating the robust somatic expression of Cas9 driven by Drosophila germline-limited promoters. We also assess the efficiency of 'shadow drive' generated by maternally deposited Cas9 protein and accumulation of drive-induced resistance alleles along multiple generations, and discuss design principles of HGD that could mitigate the accumulation of resistance alleles while incorporating a GME.

Development of a confinable gene drive system in the human disease vector Aedes aegypti

Aedes aegypti is the principal mosquito vector for many arboviruses that increasingly infect millions of people every year. With an escalating burden of infections and the relative failure of traditional control methods, the development of innovative control measures has become of paramount importance. The use of gene drives has sparked significant enthusiasm for genetic control of mosquitoes; however, no such system has been developed in Ae. aegypti. To fill this void, here we develop several CRISPR-based split gene drives for use in this vector. With cleavage rates up to 100% and transmission rates as high as 94%, mathematical models predict that these systems could spread anti-pathogen effector genes into wild populations in a safe, confinable and reversible manner appropriate for field trials and effective for controlling disease. These findings could expedite the development of effector-linked gene drives that could safely control wild populations of Ae. aegypti to combat local pathogen transmission.

A transcomplementing gene drive provides a flexible platform for laboratory investigation and potential field deployment

CRISPR-based gene drives can spread through wild populations by biasing their own transmission above the 50% value predicted by Mendelian inheritance. These technologies offer population-engineering solutions for combating vector-borne diseases, managing crop pests, and supporting ecosystem conservation efforts. Current technologies raise safety concerns for unintended gene propagation. Herein, we address such concerns by splitting the drive components, Cas9 and gRNAs, into separate alleles to form a trans-complementing split-gene-drive (tGD) and demonstrate its ability to promote super-Mendelian inheritance of the separate transgenes. This dual-component configuration allows for combinatorial transgene optimization and increases safety by restricting escape concerns to experimentation windows. We employ the tGD and a small-molecule-controlled version to investigate the biology of component inheritance and resistant allele formation, and to study the effects of maternal inheritance and impaired homology on efficiency. Lastly, mathematical modeling of tGD spread within populations reveals potential advantages for improving current gene-drive technologies for field population modification.

Antiviral Effectors and Gene Drive Strategies for Mosquito Population Suppression or Replacement to Mitigate Arbovirus Transmission by Aedes aegypti

The mosquito vector Aedes aegypti transmits arthropod-borne viruses (arboviruses) of medical importance, including Zika, dengue, and yellow fever viruses. Controlling mosquito populations remains the method of choice to prevent disease transmission. Novel mosquito control strategies based on genetically manipulating mosquitoes are being developed as additional tools to combat arbovirus transmission. Genetic control of mosquitoes includes two basic strategies: population suppression and population replacement. The former aims to eliminate mosquito populations while the latter aims to replace wild populations with engineered, pathogen-resistant mosquitoes. In this review, we outline suppression strategies being applied in the field, as well as current antiviral effector genes that have been characterized and expressed in transgenic Ae. aegypti for population replacement. We discuss cutting-edge gene drive technologies that can be used to enhance the inheritance of effector genes, while highlighting the challenges and opportunities associated with gene drives. Finally, we present currently available models that can estimate mosquito release numbers and time to transgene fixation for several gene drive systems. Based on the recent advances in genetic engineering, we anticipate that antiviral transgenic Ae. aegypti exhibiting gene drive will soon emerge; however, close monitoring in simulated field conditions will be required to demonstrate the efficacy and utility of such transgenic mosquitoes.

Experimental population modification of the malaria vector mosquito, Anopheles stephensi

Small laboratory cage trials of non-drive and gene-drive strains of the Asian malaria vector mosquito, Anopheles stephensi, were used to investigate release ratios and other strain properties for their impact on transgene spread during simulated population modification. We evaluated the effects of transgenes on survival, male contributions to next-generation populations, female reproductive success and the impact of accumulation of gene drive-resistant genomic target sites resulting from nonhomologous end-joining (NHEJ) mutagenesis during Cas9, guide RNA-mediated cleavage. Experiments with a non-drive, autosomally-linked malaria-resistance gene cassette showed ‘full introduction’ (100% of the insects have at least one copy of the transgene) within 8 weeks (≤ 3 generations) following weekly releases of 10:1 transgenic:wild-type males in an overlapping generation trial design. Male release ratios of 1:1 resulted in cages where mosquitoes with at least one copy of the transgene fluctuated around 50%. In comparison, two of three cages in which the malaria-resistance genes were linked to a gene-drive system in an overlapping generation, single 1:1 release reached full introduction in 6–8 generations with a third cage at ~80% within the same time. Release ratios of 0.1:1 failed to establish the transgenes. A non-overlapping generation, single-release trial of the same gene-drive strain resulted in two of three cages reaching 100% introduction within 6–12 generations following a 1:1 transgenic:wild-type male release. Two of three cages with 0.33:1 transgenic:wild-type male single releases achieved full introduction in 13–16 generations. All populations exhibiting full introduction went extinct within three generations due to a significant load on females having disruptions of both copies of the target gene, kynurenine hydroxylase. While repeated releases of high-ratio (10:1) non-drive constructs could achieve full introduction, results from the 1:1 release ratios across all experimental designs favor the use of gene drive, both for efficiency and anticipated cost of the control programs.

The experimental introduction of manipulated genes into insect species has a long history in basic genetics. Recent advances in genome editing technologies have spurred considerable effort to exploit these methodologies to provide genetic solutions to some of the worst medical and agricultural problems caused by insects. Insect population suppression and population modification approaches have been proposed to control transmission of vector-borne diseases, including malaria. We used small cage trials to explore the efficacy of non-drive and gene-drive releases to deliver anti-malarial effector genes to a vector mosquito, Anopheles stephensi. We show that both approaches can work to introduce genes to high percentages, but as expected, the gene-drive approaches were more efficient in that they needed only a single release with a much lower number of released insects. The gene-drive females in our studies exhibited a significant load that resulted in some cage populations going to extinction. Furthermore, the accumulation of drive-resistant target genes prevented full introduction of the transgenes in those cages that did not go extinct. While none of the strains evaluated here are proposed for open release, these laboratory cage trials reveal features that can be used to improve next-generation gene-drive strains for population modification.

A typology of community and stakeholder engagement based on documented examples in the field of novel vector control

Background

Despite broad consensus on the importance of community and stakeholder engagement (CSE) for guiding the development, regulation, field testing, and deployment of emerging vector control technologies (such as genetically engineered insects), the types of activities pursued have varied widely, as have the outcomes. We looked to previous CSE efforts for clarity about appropriate methods and goals. Our analysis yielded a typology of CSE, and related vocabulary, that describes distinctions that funders, organizers, and scholars should make when proposing or evaluating CSE.

Methods

We compiled available formal documentation of CSE projects, starting with projects mentioned in interviews with 17 key informants. Major features of these examples, including the initiators, target groups, timing, goals, and methods were identified using qualitative coding. Based on these examples, subcategories were developed for a subset of features and applied to the identified cases of CSE in the documents. Co-occurrence of subcategorized features was examined for patterns.

Results

We identified 14 documented examples CSE projects, which were comprised of 28 distinct CSE activities. We found no clear patterns with respect to timing. However, we found that grouping examples according to whether initiators or targets could enact the immediate desired outcome could help to clarify relationships between goals, methods, and targets.

Conclusion

Based on this analysis, we propose a typology that distinguishes three categories of CSE: engagement to inquire –where initiators are empowered to act on information collected through engagement with target groups; engagement to influence –where initiators engage to affect the actions of already-empowered target groups; and engagement to involve –where initiators engage to delegate authority to target groups. The proposed typology can serve as a guide for establishing the goals, identifying appropriate methods, and evaluating and reporting CSE projects by directing attention to important questions to be asked well before determining who to engage and how.

Mosquito borne diseases, such as malaria and dengue, are major causes of illness and death worldwide. Furthermore, it is getting harder to control mosquitoes and other disease-carrying pests because global climate change is facilitating their spread to new areas, and over time, mosquitoes develop resistance to pesticides. Scientists are therefore developing new methods for controlling mosquito vectors using new gene editing tools. However, releasing genetically engineered insects into the environment is controversial. Many experts recommend that communities and stakeholders be consulted about if or how to use these new methods, but there are few guidelines for the best way to do this. We examined published accounts of community and stakeholder engagement pertaining to novel vector control and looked for patterns across these cases. We found that many efforts were not described in published sources, but those that were could be grouped into three categories: engagement to inquire, engagement to influence, and engagement to involve.

Transforming insect population control with precision guided sterile males with demonstration in flies

The sterile insect technique (SIT) is an environmentally safe and proven technology to suppress wild populations. To further advance its utility, a novel CRISPR-based technology termed precision guided SIT (pgSIT) is described. PgSIT mechanistically relies on a dominant genetic technology that enables simultaneous sexing and sterilization, facilitating the release of eggs into the environment ensuring only sterile adult males emerge. Importantly, for field applications, the release of eggs will eliminate burdens of manually sexing and sterilizing males, thereby reducing overall effort and increasing scalability. Here, to demonstrate efficacy, we systematically engineer multiple pgSIT systems in Drosophila which consistently give rise to 100% sterile males. Importantly, we demonstrate that pgSIT-generated sterile males are fit and competitive. Using mathematical models, we predict pgSIT will induce substantially greater population suppression than can be achieved by currently-available self-limiting suppression technologies. Taken together, pgSIT offers to potentially transform our ability to control insect agricultural pests and disease vectors.

Using Gene Drive Technologies to Control Vector-Borne Infectious Diseases

After years of success in reducing the global malaria burden, the World Health Organization (WHO) recently reported that progress has stalled. Over 90% of malaria deaths world-wide occurred in the WHO African Region. New tools are needed to regain momentum and further decrease the burden of malaria. Gene drive, an emerging technology that can enhance the inheritance of beneficial genes, offers potentially transformative solutions for overcoming these challenges. Gene drives may decrease disease transmission by interfering with the growth of the malaria parasite in the mosquito vector or reducing mosquito reproductive capacity. Like other emerging technologies, development of gene drive products faces technical and non-technical challenges and uncertainties. In 2018, to begin addressing such challenges, a multidisciplinary group of international experts published comprehensive recommendations for responsible testing and implementation of gene drive-modified mosquitoes to combat malaria in Sub-Saharan Africa. Considering requirements for containment, efficacy and safety testing, monitoring, stakeholder engagement and authorization, as well as policy and regulatory issues, the group concluded that gene drive products for malaria can be tested safely and ethically, but that this will require substantial coordination, planning, and capacity development. The group emphasized the importance of co-development and co-ownership of products by in-country scientists.

Gene drive systems: do they have a place in agricultural weed management?

There is a pressing need for novel control techniques in agricultural weed management. Direct genetic control of agricultural pests encompasses a range of techniques to introduce and spread novel, fitness-reducing genetic modifications through pest populations. Recently, the development of CRISPR-Cas9 gene editing has brought these approaches into sharper focus. Proof of concept for CRISPR-Cas9-based gene drives has been demonstrated for the control of disease-vectoring insects. This article considers whether and how gene drives may be applied in agricultural weed management, focusing on CRISPR-Cas9-based systems. Population-suppression drives might be employed to introduce and proliferate deleterious mutations that directly impact fitness and weediness, whereas population-sensitizing drives would seek to edit weed genomes so that populations are rendered more sensitive to subsequent management interventions. Technical challenges relating to plant transformation and gene editing in planta are considered, and the implementation of gene drives for timely and sustainable weed management is reviewed in the light of weed population biology. The technical, biological, practical and regulatory challenges remain significant. Modelling-based studies can inform how and if gene drives could be employed in weed populations. These studies are an essential first step towards determining the utility of gene drives for weed management. © 2018 The Author. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Trends in Synthetic Biology Applications, Tools, Industry, and Oversight and Their Security Implications

Recent developments in synthetic biology tools and techniques are driving commercialization of a wide range of products for human health, agriculture, environmental stewardship, and other purposes. This article reviews some of the trends in synthetic biology applications as well as some of the tools enabling these and future advances. These tools and capabilities are being developed in the context of a rapidly changing industry, which may have an impact on the rate and direction of progress. Final products are subject to a regulatory framework that is being challenged by the pace, scale, and novelty of this new era of biotechnology. This article includes discussion of these factors and how they may affect product design and the types of applications that are most likely to be supported and pursued commercially. The final section provides perspective on the security implications of these advances, with a focus on US interests.

Gene editing technologies and applications for insects

Initially discovered in bacteria, CRISPR-based genome editing endonucleases have proven remarkably amenable for adaptation to insects. To date, these endonucleases have been utilized in a plethora of both model and non-model insects including diverse flies, bees, beetles, butterflies, moths, and grasshoppers, to name a few, thereby revolutionizing functional genomics of insects. In addition to basic genome editing, they have also been invaluable for advanced genome engineering and synthetic biology applications. Here we explore the recent genome editing advancements in insects for generating site-specific genomic mutations, insertions, deletions, as well as more advanced applications such as Homology Assisted Genome Knock-in (HACK), potential to utilize DNA base editing, generating predictable reciprocal chromosomal translocations, and development gene drives to control the fate of wild populations.

Considerations for the governance of gene drive organisms

Governance is a broader and more flexible concept than statute-driven regulations as it incorporates components outside the latter's remit. Considerations of governance are critical in the development of emerging biotechnologies such as gene drive organisms. These have been proposed or are being developed to address public and environmental health issues not addressed easily by conventional means. Here, we consider how the concept of governance differs from statute-driven regulation with reference to the role each may play in the development of gene drive organisms. First, we discuss existing statute-based regulatory systems. Second, we consider whether novel risks or different concerns derive from gene drive organisms, concentrating on characteristics that contribute to public health or environmental risk and uncertainties that may affect risk perceptions. Third, we consider public engagement, outlining how existing statute-driven regulatory systems and other governance mechanisms may provide opportunities for constructive interactions. Finally, we provide some observations that may help address science- and values-based concerns in a governance space larger than that of statute-driven regulatory systems.

Pathway to Deployment of Gene Drive Mosquitoes as a Potential Biocontrol Tool for Elimination of Malaria in Sub-Saharan Africa: Recommendations of a Scientific Working Group†

Gene drive technology offers the promise for a high-impact, cost-effective, and durable method to control malaria transmission that would make a significant contribution to elimination. Gene drive systems, such as those based on clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR associated protein, have the potential to spread beneficial traits through interbreeding populations of malaria mosquitoes. However, the characteristics of this technology have raised concerns that necessitate careful consideration of the product development pathway. A multidisciplinary working group considered the implications of low-threshold gene drive systems on the development pathway described in the World Health Organization Guidance Framework for testing genetically modified (GM) mosquitoes, focusing on reduction of malaria transmission by Anopheles gambiae s.l. mosquitoes in Africa as a case study. The group developed recommendations for the safe and ethical testing of gene drive mosquitoes, drawing on prior experience with other vector control tools, GM organisms, and biocontrol agents. These recommendations are organized according to a testing plan that seeks to maximize safety by incrementally increasing the degree of human and environmental exposure to the investigational product. As with biocontrol agents, emphasis is placed on safety evaluation at the end of physically confined laboratory testing as a major decision point for whether to enter field testing. Progression through the testing pathway is based on fulfillment of safety and efficacy criteria, and is subject to regulatory and ethical approvals, as well as social acceptance. The working group identified several resources that were considered important to support responsible field testing of gene drive mosquitoes.

Engineered Reciprocal Chromosome Translocations Drive High Threshold, Reversible Population Replacement in Drosophila

Replacement of wild insect populations with transgene-bearing individuals unable to transmit disease or survive under specific environmental conditions using gene drive provides a self-perpetuating method of disease prevention. Mechanisms that require the gene drive element and linked cargo to exceed a high threshold frequency in order for spread to occur are attractive because they offer several points of control: they bring about local, but not global population replacement; and transgenes can be eliminated by reintroducing wildtypes into the population so as to drive the frequency of transgenes below the threshold frequency required for drive. Reciprocal chromosome translocations were proposed as a tool for bringing about high threshold population replacement in 1940 and 1968. However, translocations able to achieve this goal have only been reported once, in the spider mite Tetranychus urticae, a haplo-diploid species in which there is strong selection in haploid males for fit homozygotes. We report the creation of engineered translocation-bearing strains of Drosophila melanogaster, generated through targeted chromosomal breakage and homologous recombination. These strains drive high threshold population replacement in laboratory populations. While it remains to be shown that engineered translocations can bring about population replacement in wild populations, these observations suggest that further exploration of engineered translocations as a tool for controlled population replacement is warranted.

Tuning CRISPR-Cas9 Gene Drives in Saccharomyces cerevisiae

Control of biological populations is an ongoing challenge in many fields, including agriculture, biodiversity, ecological preservation, pest control, and the spread of disease. In some cases, such as insects that harbor human pathogens (e.g., malaria), elimination or reduction of a small number of species would have a dramatic impact across the globe. Given the recent discovery and development of the CRISPR-Cas9 gene editing technology, a unique arrangement of this system, a nuclease-based "gene drive," allows for the super-Mendelian spread and forced propagation of a genetic element through a population. Recent studies have demonstrated the ability of a gene drive to rapidly spread within and nearly eliminate insect populations in a laboratory setting. While there are still ongoing technical challenges to design of a more optimal gene drive to be used in wild populations, there are still serious ecological and ethical concerns surrounding the nature of this powerful biological agent. Here, we use budding yeast as a safe and fully contained model system to explore mechanisms that might allow for programmed regulation of gene drive activity. We describe four conserved features of all CRISPR-based drives and demonstrate the ability of each drive component-Cas9 protein level, sgRNA identity, Cas9 nucleocytoplasmic shuttling, and novel Cas9-Cas9 tandem fusions-to modulate drive activity within a population.

Can CRISPR-Based Gene Drive Be Confined in the Wild? A Question for Molecular and Population Biology

The recent discovery of CRISPR and its application as a gene editing tool has enabled a range of gene drive systems to be engineered with greater ease. In order for the benefits of this technology to be realized, in some circumstances drive systems should be developed that are capable of both spreading into populations to achieve their desired impact and being recalled in the event of unwanted consequences or public disfavor. We review the performance of three broad categories of drive systems at achieving these goals: threshold-dependent drives, homing-based drive and remediation systems, and temporally self-limiting systems such as daisy-chain drives.

Highly Efficient Site-Specific Mutagenesis in Malaria Mosquitoes Using CRISPR

Anopheles mosquitoes transmit at least 200 million annual malaria infections worldwide. Despite considerable genomic resources, mechanistic understanding of biological processes in Anopheles has been hampered by a lack of tools for reverse genetics. Here, we report successful application of the CRISPR/Cas9 system for highly efficient, site-specific mutagenesis in the diverse malaria vectors Anopheles albimanus, A. coluzzii, and A. funestus. When guide RNAs (gRNAs) and Cas9 protein are injected at high concentration, germline mutations are common and usually biallelic, allowing for the rapid creation of stable mutant lines for reverse genetic analysis. Our protocol should enable researchers to dissect the molecular and cellular basis of anopheline traits critical to successful disease transmission, potentially exposing new targets for malaria control.