Production of recombinant bovine enterokinase catalytic subunit in Escherichia coli using the novel secretory fusion partner DsbA

Caspase-Based Fusion Protein Technology: Substrate Cleavability Described by Computational Modeling and Simulation

The Caspase-based fusion protein technology (CASPON) allows for universal cleavage of fusion tags from proteins of interest to reconstitute the native N-terminus. While the CASPON enzyme has been optimized to be promiscuous against a diversity of N-terminal peptides, the cleavage efficacy for larger proteins can be surprisingly low. We develop an efficient means to rationalize and predict the cleavage efficiency based on a structural representation of the intrinsically disordered N-terminal peptides and their putative interactions with the CASPON enzyme. The number of favorably interacting N-terminal conformations shows a very good agreement with the experimentally observed cleavage efficiency, in agreement with a conformational selection model. The method relies on computationally cheap molecular dynamics simulations to efficiently generate a diverse collection of N-terminal conformations, followed by a simple fitting procedure into the CASPON enzyme. It can be readily used to assess the CASPON cleavability a priori.

Choice of fusion proteins, expression host, and analytics solves difficult-to-produce protein challenges in discovery research

High quality biological reagents are a prerequisite for pharmacological research. Herein a protein production screening approach, including quality assessment methods, for protein-based discovery research is presented. Trends from 2895 expression constructs representing 253 proteins screened in mammalian and bacterial hosts-91% of which are successfully expressed and purified-are discussed. Mammalian expression combined with the use of solubility-promoting fusion proteins is deemed suitable for most targets. Furthermore, cases utilizing stable cell line generation and choice of fusion protein for higher yield and quality of difficult-to-produce proteins (Leucine-rich repeat-containing G-protein coupled receptor 4 (LGR4) and Neurturin) are presented and discussed. In the case of Neurturin, choice of fusion protein impacted the target binding 80-fold. These results highlight the need for exploration of construct designs and careful Quality Control (QC) of difficult-to-produce protein reagents.

Improving productive performance, immunity, and health status of growing rabbits by using honey bee venom (Apis mellifera)

To investigate the effect of bee venom (BV) as a natural growth promotor on growing rabbits as an alternative to antibiotics, sixty 35-day-old Californian male rabbits with an average body weight of 584 ± 9 gm were randomly divided into five equal groups as follows: The 2nd group received drinking water supplied with 10 mg Oxytetracycline (OXT), while the 3rd, 4th, and 5th groups received 2, 4 and 8 mg bee venom (BV)/kg body weight/day in drinking water, and the first group was served as a control group. The growth performance features were positively impacted by adding BV (p ≤ 0.01) compared to the control, whereas LBW and BWG increased and FI reduced. Significantly improved carcass characteristics (p ≤ 0.01) as a result of the BV supplementation. Blood characteristics showed a significant reduction (p ≤ 0.01) in liver enzyme activities and Cholesterol, Triglycerides, and Low-density lipoproteins Cholesterol (LDL) as affected by BV treatment; inversely, total protein and globulin were significantly increased (p ≤ 0.01). Similarly, BV had a positive effect (p ≤ 0.01) on anti-oxidant status (Total anti-oxidant capacity (TAC), Glutathione peroxidase (GPx), superoxide dismutase (SOD) and catalase (CAT)). In contrast, the lipid peroxidation biomarker (Malondialdehyde (MDA)) was significantly decreased. The immunoglobulin (IgG and IgM) was significantly increased (p ≤ 0.01) by BV treatment. There was a positive effect of low BV levels on decreasing both cecum TBC and pathogenic bacterial count (Salmonella spp., E.coli spp., Proteus spp., and Clostridia spp.) that was significant (p ≤ 0.01). In conclusion, BV can be a natural growth promoter to enhance growth performance traits, immunological and anti-oxidative responses, and reduce pathogenic bacteria in the hindgut of growing rabbits.

A simple and efficient method for cytoplasmic production of human enterokinase light chain in E. coli

Human enterokinase light chain (hEKL) cDNA sequence was designed with the help of codon optimization towards Escherichia coli codon preference and ribosome binding site design and artificially synthesized with a thioredoxin fusion tag at the N-terminal and a five his-tag peptide at the C-terminal. The synthetic hEKL gene was cloned into the pET-15 expression vector and transferred into the three different expression strains of E. coli BL21(DE3), NiCo21, and SHuffle T7 Express. Different growth and induction conditions were studied using a statistical response surface methodology (RSM). Recombinant hEKL protein was expressed at high levels in soluble form with 0.71 mM IPTG after 4 h of induction at 25 °C. Autocatalytic process cleaved TRX tag with enterokinase recognition site by the impure hEKL and yielded the mature enzyme. The target protein was then purified to homogeneity (> 95%) by affinity chromatography. The activity of hEKL was comparable to the commercial enzyme. From 1 L culture, 80 mg pure active hEKL was obtained with the specific activity of 6.25 × 10² U/mg. Three main parameters that help us to produce the enzyme in the folded and active form are the type of strain, SHuffle T7 strain, TRX and histidine fusion tags, and growth conditions including the increase of OD of induction and IPTG concentration and the decrease of induction temperature.

The Global Status and Trends of Enteropeptidase: A Bibliometric Study

Background

Enteropeptidase (EP) is a type II transmembrane serine protease and a physiological activator of trypsinogen. Extensive studies related to EP have been conducted to date. However, no bibliometric analysis has systematically investigated this theme. Our study aimed to visualize the current landscape and frontier trends of scientific achievements on EP, provide an overview of the past 120 years and insights for researchers and clinicians to facilitate future collaborative research and clinical intervention.

Methods

Quantitative analysis of publications relating to EP from 1900 to 2020 was interpreted and graphed through the Science Citation Index Expanded of Web of Science Core Collection (limited to SCIE). Microsoft office 2019, GraphPad Prism 8, VOSviewer, and R-bibliometrix were used to conduct the bibliometric analysis.

Results

From 1900 to 2020, a total of 1,034 publications were retrieved. The USA had the largest number of publications, making the greatest contribution to the topic (n = 260, 25.15%). Active collaborations between countries/regions were also enrolled. Grant and Hermontaylor were perhaps the most impactful researchers in the landscape of EP. Protein Expression and Purification and the Journal of Biological Chemistry were the most prevalent (79/1,034, 7.64%) and cited journals (n = 2,626), respectively. Using the top 15 citations and co-citations achievements clarified the theoretical basis of the EP research field. Important topics mainly include the structure of EP, the affective factors for activating substrates by EP, EP-related disorders, and inhibitors of EP.

Conclusion

Based on the bibliometric analysis, we have gained a comprehensive analysis of the global status and research frontiers of studies investigating EP, which provides some guidance and reference for researchers and clinicians engaged in EP research.

Comparison of Periplasmic and Cytoplasmic Expression of Bovine Enterokinase Light Chain in E. coli

Enterokinase enzyme is widely used in production of recombinant proteins. This enzyme is isolated from the intestine and recognizes a specific cleavage site (X↓LYS-ASP₄). Several studies have been performed to produce recombinant active enterokinase. In this study, the coding sequence of bovine enteropeptidase light chain (bEK_L) was isolated from Iranian Sarabi cattle and its expression was investigated in the periplasm and cytoplasm of E. coli by two different expression vectors, pET22 and pET32RH. RNA was extracted from the duodenum part of cattle, cDNA was amplified, the enterokinase light chain coding fragment was cloned and the expression was examined by SDS-PAGE analysis. The higher amounts of soluble enterokinase as a fusion with thioredoxin (Trx) were detected in cytoplasmic expression. The functional enterokinase was purified with a yield of 45 mg per litter by two-steps Ni²⁺ affinity chromatography. The effective activity of the enzyme implies that it can be produced in large scale for biotechnological applications.

Thermococcus sp. KS-1 PPIase as a fusion partner improving soluble production of aromatic amino acid decarboxylase

Peptidyl-prolyl cis-trans isomerase (PPIase, EC 5.2.1.8) catalyzes the racemization reaction of proline residues on a polypeptide chain. This enzyme is also known to function as a molecular chaperon to stabilize protein conformation during the folding process. In this study, we noted FK506 binding protein (FKBP)-type PPIase from a hyperthemophilic archaeon Thermococcus sp. strain KS-1 (PPIase _KS−1) to improve the solubility of Pseudomonas putida aromatic amino acid decarboxylase (AADC) that is an indispensable enzyme for fermentative production of plant isoquinoline alkaloids. AADC fused N-terminally with the PPIase _KS−1 (PPIase _KS−1-AADC), which was synthesized utilizing Escherichia coli host, showed improved solubility and, consequently, the cell-free extract from the recombinant strain exhibited 2.6- to 3.4-fold elevated AADC activity than that from the control strain that expressed the AADC gene without PPIase _KS−1. On the other hand, its thermostability was slightly decreased by fusing PPIase _KS−1. The recombinant E. coli cells expressing the PPIase _KS−1-AADC gene produced dopamine and phenylethylamine from L-dopa and phenylalanine by two- and threefold faster, respectively, as compared with the control strain. We further demonstrated that the efficacy of PPIase _KS−1-AADC in solubility and activity enhancement was a little but obviously higher than that of AADC fused N-terminally with NusA protein, which has been assumed to be the most effective protein solubilizer. These results suggest that PPIase _KS−1 can be used as one of the best choices for producing heterologous proteins as active forms in E. coli.

A combination strategy of solubility enhancers for effective production of soluble and bioactive human enterokinase

Enterokinase is one of the hydrolases that catalyze hydrolysis to regulate biological processes in intestinal visceral mucosa. Enterokinase plays an essential role in accelerating the process of protein digestion as it converts trypsinogen into active trypsin by accurately recognizing and cleaving a specific peptide sequence, (Asp)4-Lys. Due to its exceptional substrate specificity, enterokinase is widely used as a versatile molecular tool in various bioprocessing, especially in removing fusion tags from recombinant proteins. Despite its biotechnological importance, mass production of soluble enterokinase in bacteria still remains an unsolved challenge. Here, we present an effective production strategy of human enterokinase using tandemly linked solubility enhancers consisting of thioredoxin, phosphoglycerate kinase or maltose-binding protein. The resulting enterokinases exhibited significantly enhanced solubility and bacterial expression level while retaining enzymatic activity, which demonstrates that combinatorial design of fusion proteins has the potential to provide an efficient way to produce recombinant proteins in bacteria.

Expression and purification of soluble and active human enterokinase light chain in Escherichia coli

•

Recombinant production of soluble, active enterokinase (EK) is challenging.

•

Maltose binding protein-fusion improves EK solubility but reduces activity.

•

GroEL/ES and Erv2/PDI induces correct refolding and improves EK activity.

•

Replacing free cysteine with serine dramatically improves EK activity.

Human enterokinase light chain (hEK_L) specifically cleaves the sequence (Asp)₄-Lys↓X (D₄K), making this a frequently used enzyme for site-specific cleavage of recombinant fusion proteins. However, hEK_L production from Escherichia coli is limited due to intramolecular disulphide bonds. Here, we present strategies to obtain soluble and active hEK_L from E. coli by expressing the hEK_L variant C112S fused with maltose-binding protein (MBP) through D₄K and molecular chaperons including GroEL/ES. The fusion protein self-cleaved in vivo, thereby removing the MBP in the E. coli cells. Thus, the self-cleaved hEK_L variant was released into the culture medium. One-step purification using HisTrap™ chromatography purified the hEK_L variant exhibiting an enzymatic activity of 3.1 × 10³ U/mL (9.934 × 10⁵ U/mg). The approaches presented here greatly simplify the purification of hEK_L from E. coli without requiring refolding processes.

Production of Circularly Permuted Caspase-2 for Affinity Fusion-Tag Removal: Cloning, Expression in Escherichia coli, Purification, and Characterization

Caspase-2 is the most specific protease of all caspases and therefore highly suitable as tag removal enzyme creating an authentic N-terminus of overexpressed tagged proteins of interest. The wild type human caspase-2 is a dimer of heterodimers generated by autocatalytic processing which is required for its enzymatic activity. We designed a circularly permuted caspase-2 (cpCasp2) to overcome the drawback of complex recombinant expression, purification and activation, cpCasp2 was constitutively active and expressed as a single chain protein. A 22 amino acid solubility tag and an optimized fermentation strategy realized with a model-based control algorithm further improved expression in Escherichia coli and 5.3 g/L of cpCasp2 in soluble form were obtained. The generated protease cleaved peptide and protein substrates, regardless of N-terminal amino acid with high activity and specificity. Edman degradation confirmed the correct N-terminal amino acid after tag removal, using Ubiquitin-conjugating enzyme E2 L3 as model substrate. Moreover, the generated enzyme is highly stable at -20 °C for one year and can undergo 25 freeze/thaw cycles without loss of enzyme activity. The generated cpCasp2 possesses all biophysical and biochemical properties required for efficient and economic tag removal and is ready for a platform fusion protein process.

Polyionic Tags as Enhancers of Protein Solubility in Recombinant Protein Expression

Since the introduction of recombinant protein expression in the second half of the 1970s, the growth of the biopharmaceutical field has been rapid and protein therapeutics has come to the foreground. Biophysical and structural characterisation of recombinant proteins is the essential prerequisite for their successful development and commercialisation as therapeutics. Despite the challenges, including low protein solubility and inclusion body formation, prokaryotic host systems and particularly Escherichia coli, remain the system of choice for the initial attempt of production of previously unexpressed proteins. Several different approaches have been adopted, including optimisation of growth conditions, expression in the periplasmic space of the bacterial host or co-expression of molecular chaperones, to assist correct protein folding. A very commonly employed approach is also the use of protein fusion tags that enhance protein solubility. Here, a range of experimentally tested peptide tags, which present specific advantages compared to protein fusion tags and the concluding remarks of these experiments are reviewed. Finally, a concept to design solubility-enhancing peptide tags based on a protein’s pI is suggested.

Protein fusion tags for efficient expression and purification of recombinant proteins in the periplasmic space of E. coli

Disulfide bonds occurred in majority of secreted protein. Formation of correct disulfide bonds are must for achieving native conformation, solubility and activity. Production of recombinant proteins containing disulfide bond for therapeutic, diagnostic and various other purposes is a challenging task of research. Production of such proteins in the reducing cytosolic compartment of E. coli usually ends up in inclusion bodies formation. Refolding of inclusion bodies can be difficult, time and labor consuming and uneconomical. Translocation of these proteins into the oxidative periplasmic compartment provides correct environment to undergo proper disulfide bonds formation and thus achieving native conformation. However, not all proteins can be efficiently translocated to the periplasm with the help of bacterial signal peptides. Therefore, fusion to a small well-folded and stable periplasmic protein is more promising for periplasmic production of disulfide bonded proteins. In the past decades, several full-length proteins or domains were used for enhancing translocation and solubility. Here, protein fusion tags that significantly increase the yields of target proteins in the periplasmic space are reviewed.

Expression, purification, and characterization of mouse nesfatin-1 in Escherichia coli

Nesfatin-1 is a newly discovered satiety molecule expressed mainly in the hypothalamic nuclei. It suppresses both short-term and long-term appetite. Six synthetic deoxyoligonucleotides overlapped by PCR encoding nesfatin-1 were cloned into a pET28a vector after the hexa-histidine-tagged multiple cloning sites sequence with an enterokinase recognition site incorporated in-between. The recombinant plasmid was transformed into Escherichia coli strain Rosetta to express the fusion protein, which constituted 27% of the total cell proteins. After purified by Ni-sepharose affinity chromatography, the fusion protein was treated with enterokinase to release nesfatin-1. The nesfatin-1 sample was further purified with reverse-phase high performance liquid chromatography (HPLC), and its molecular weight was determined by mass spectrometry. The biological activities of recombinant nesfatin-1 were also assessed using in vivo animal models. The method described here promises to produce about 8 mg biologically active nesfatin-1 with homogeneity over 98% from 1-L shaking flask culture of E. coli, which can be considered as an easy and cost-effective way to synthesize nesfatin-1.

A phosphorylation tag for uranyl mediated protein purification and photo assisted tag removal

Most protein purification procedures include an affinity tag fused to either the N or C-terminal end of the protein of interest as well as a procedure for tag removal. Tag removal is not straightforward and especially tag removal from the C-terminal end is a challenge due to the characteristics of enzymes available for this purpose. In the present study, we demonstrate the utility of the divalent uranyl ion in a new procedure for protein purification and tag removal. By employment of a GFP (green florescence protein) recombinant protein we show that uranyl binding to a phosphorylated C-terminal tag enables target protein purification from an E. coli extract by immobilized uranyl affinity chromatography. Subsequently, the tag can be efficiently removed by UV-irradiation assisted uranyl photocleavage. We therefore suggest that the divalent uranyl ion (UO₂²⁺) may provide a dual function in protein purification and subsequent C-terminal tag removal procedures.

Strategies for the production of recombinant protein in Escherichia coli

In the recent past years, a large number of proteins have been expressed in Escherichia coli with high productivity due to rapid development of genetic engineering technologies. There are many hosts used for the production of recombinant protein but the preferred choice is E. coli due to its easier culture, short life cycle, well-known genetics, and easy genetic manipulation. We often face a problem in the expression of foreign genes in E. coli. Soluble recombinant protein is a prerequisite for structural, functional and biochemical studies of a protein. Researchers often face problems producing soluble recombinant proteins for over-expression, mainly the expression and solubility of heterologous proteins. There is no universal strategy to solve these problems but there are a few methods that can improve the level of expression, non-expression, or less expression of the gene of interest in E. coli. This review addresses these issues properly. Five levels of strategies can be used to increase the expression and solubility of over-expressed protein; (1) changing the vector, (2) changing the host, (3) changing the culture parameters of the recombinant host strain, (4) co-expression of other genes and (5) changing the gene sequences, which may help increase expression and the proper folding of desired protein. Here we present the resources available for the expression of a gene in E. coli to get a substantial amount of good quality recombinant protein. The resources include different strains of E. coli, different E. coli expression vectors, different physical and chemical agents and the co expression of chaperone interacting proteins. Perhaps it would be the solutions to such problems that will finally lead to the maturity of the application of recombinant proteins. The proposed solutions to such problems will finally lead to the maturity of the application of recombinant proteins.

Several affinity tags commonly used in chromatographic purification

Affinity tags have become powerful tools from basic biological research to structural and functional proteomics. They were widely used to facilitate the purification and detection of proteins of interest, as well as the separation of protein complexes. Here, we mainly discuss the benefits and drawbacks of several affinity or epitope tags frequently used, including hexahistidine tag, FLAG tag, Strep II tag, streptavidin-binding peptide (SBP) tag, calmodulin-binding peptide (CBP), glutathione S-transferase (GST), maltose-binding protein (MBP), S-tag, HA tag, and c-Myc tag. In some cases, a large-size affinity tag, such as GST or MBP, can significantly impact on the structure and biological activity of the fusion partner protein. So it is usually necessary to excise the tag by protease. The most commonly used endopeptidases are enterokinase, factor Xa, thrombin, tobacco etch virus, and human rhinovirus 3C protease. The proteolysis features of these proteases are described in order to provide a general guidance on the proteolytic removal of the affinity tags.

Do-it-yourself histidine-tagged bovine enterokinase: a handy member of the protein engineer's toolbox

Enterokinase, a two-chain duodenal serine protease, activates trypsinogen by removing its N-terminal propeptide. Due to a clean cut after the non-primed site recognition sequence, the enterokinase light chain is frequently employed in biotechnology to separate N-terminal affinity tags from target proteins with authentic N-termini. In order to obtain large quantities of this protease, we adapted an in vitro folding protocol for a pentahistidine-tagged triple mutant of the bovine enterokinase light chain. The purified, highly active enzyme successfully processed recombinant target proteins, while the pentahistidine-tag facilitated post-cleavage removal. Hence, we conclude that producing enterokinase in one's own laboratory is an efficient alternative to the commercial enzyme.

Heterogeneous catalysis on the phage surface: Display of active human enteropeptidase

Enteropeptidase (EC 3.4.21.9) plays a key role in mammalian digestion as the enzyme that physiologically activates trypsinogen by highly specific cleavage of the trypsinogen activation peptide following the recognition sequence D4K. The high specificity of enteropeptidase makes it a powerful tool in modern biotechnology. Here we describe the application of phage display technology to express active human enteropeptidase catalytic subunits (L-HEP) on M13 filamentous bacteriophage. The L-HEP/C122S gene was cloned in the g3p-based phagemid vector pHEN2m upstream of the sequence encoding the phage g3p protein and downstream of the signal peptide-encoding sequence. Heterogeneous catalysis of the synthetic peptide substrate (GDDDDK-β-naphthylamide) cleavage by phage-bound L-HEP was shown to have kinetic parameters similar to those of soluble enzyme, with the respective Km values of 19 μM and 20 μM and kcat of 115 and 92 s(-1). Fusion proteins containing a D4K cleavage site were cleaved with phage-bound L-HEP/C122S as well as by soluble L-HEP/C122S, and proteolysis was inhibited by soybean trypsin inhibitor. Rapid large-scale phage production, one-step purification of phage-bound L-HEP, and easy removal of enzyme activity from reaction samples by PEG precipitation make our approach suitable for the efficient removal of various tag sequences fused to the target proteins. The functional phage display technology developed in this study can be instrumental in constructing libraries of mutants to analyze the effect of structural changes on the activity and specificity of the enzyme or generate its desired variants for biotechnological applications.

Human enteropeptidase light chain: bioengineering of recombinants and kinetic investigations of structure and function

The serine protease enteropeptidase exhibits a high level of substrate specificity for the cleavage sequence DDDDK∼ X, making this enzyme a useful tool for the separation of recombinant protein fusion domains. In an effort to improve the utility of enteropeptidase for processing fusion proteins and to better understand its structure and function, two substitution variants of human enteropeptidase, designated R96Q and Y174R, were created and produced as active (>92%) enzymes secreted by Pichia pastoris with yields in excess of 1.7 mg/Liter. The Y174R variant showed improved specificities for substrates containing the sequences DDDDK (kcat /KM = 6.83 × 10⁶ M⁻¹ sec⁻¹) and DDDDR (kcat /KM = 1.89 × 10⁷ M⁻¹ sec⁻¹) relative to all other enteropeptidase variants reported to date. BPTI inhibition of Y174R was significantly decreased. Kinetic data demonstrate the important contribution of the positively charged residue 96 to extended substrate specificity in human enteropeptidase. Modeling shows the importance of the charge-charge interactions in the extended substrate binding pocket.

Application of a proapoptotic peptide to intratumorally spreading cancer therapy

Bit1 is a proapoptotic mitochondrial protein associated with anoikis. Upon cell detachment, Bit1 is released into the cytoplasm and triggers caspase-independent cell death. Bit1 consists of 179 amino acids; for the C-terminal, two thirds of the molecule functions as a peptidyl-tRNA hydrolase, whereas the N-terminus contains a mitochondrial localization signal. Here, we localize the cell death domain (CDD) to the N-terminal 62 amino acids of Bit1 by transfecting cells with truncated Bit1 cDNA constructs. CDD was more potent in killing cells than the full-length Bit1 protein when equivalent amounts of cDNA were transfected. To develop Bit1 CDD into a cancer therapeutic, we engineered a recombinant protein consisting of the CDD fused to iRGD, which is a tumor-specific peptide with unique tumor-penetrating and cell-internalizing properties. iRGD-CDD internalized into cultured tumor cells through a neuropilin-1-activated pathway and triggered cell death. Importantly, iRGD-CDD spread extensively within the tumor when injected intratumorally into orthotopically implanted breast tumors in mice. Repeated treatment with iRGD-CDD strongly inhibited tumor growth, resulting in an average reduction of 77% in tumor volume and eradication of some tumors. The caspase independence of Bit1-induced cell death makes CDD a potentially attractive anticancer agent, because tumor resistance to the main mechanisms of apoptosis is circumvented. Using iRGD to facilitate the spreading of a therapeutic agent throughout the tumor mass may be a useful adjunct to local therapy for tumors that are surgically inoperable or difficult to treat systemically.

Buffer enhanced bioluminescence resonance energy transfer sensor based on Gaussia luciferase for in vitro detection of protease

Bioluminescence resonance energy transfer (BRET) has gained favors in recent years as a detection technology for protease activity due to its extreme reliability, high sensitivity and low intrinsic backgrounds. Because of the sensitivity of the donors, substrates and the acceptors, it is expected that BRET systems are sensitive to buffer environments. However, no systematic study has been reported on how buffer components would affect the BRET ratio, and thus affect the determination of protease activity based on BRET. We present here that several environmental factors, including buffer agents, pH and divalent metal ions, influenced BRET ratio significantly, when humanized Gaussia luciferase (hGluc) was utilized as the donor and enhanced yellow fluorescence protein (EYFP) as the acceptor. Based on these findings, an enhancing solution was optimized to improve the performance of the BRET sensor for analysis of enterokinase activity in vitro, resulting in 10-fold and 7-fold improvement of the sensitivity and the detection limit, respectively. We anticipate the system will be applicable for improving performance of other in vitro BRET protease sensors, especially when the optimal conditions for protease activity would severely affect the BRET signal.

High level expression of human enteropeptidase light chain in Pichia pastoris

Human enterokinase (enteropeptidase, rhEP), a serine protease expressed in the proximal part of the small intestine, converts the inactive form of trypsinogen to active trypsin by endoproteolytic cleavage. The high specificity of the target site makes enterokinase an ideal tool for cleaving fusion proteins at defined cleavage sites. The mature active enzyme is comprised of two disulfide-linked polypeptide chains. The heavy chain anchors the enzyme in the intestinal brush border membrane, whereas the light chain represents the catalytic enzyme subunit. The synthetic gene encoding human enteropeptidase light chain with His-tag added at the C-terminus to facilitate protein purification was cloned into Pichia pastoris expression plasmids under the control of an inducible AOX1 or constitutive promoters GAP and AAC. Cultivation media and conditions were optimized as well as isolation and purification of the target protein. Up to 4 mg/L of rhEP was obtained in shake-flask experiments and the expression level of about 60-70 mg/L was achieved when cultivating in lab-scale fermentors. The constitutively expressing strains proved more efficient and less labor-demanding than the inducible ones. The rhEP was immobilized on AV 100 sorbent (Iontosorb) to allow repeated use of enterokinase, showing specific activity of 4U/mL of wet matrix.

Rational recombinant XMRV antigen preparation and bead coupling for multiplex serology in a suspension array

Diagnosis of infectious diseases often requires demonstration of antibodies to the microbe (serology). A large set of antigens, covering viruses, bacteria, fungi and parasites may be needed. Recombinant proteins have a prime role in serological tests. Suspension arrays offer high throughput for simultaneous measurement of many different antibodies. We here describe a rational process for preparation, purification and coupling to beads of recombinant proteins prepared in Escherichia coli derivate Origami B, to be used in a serological Luminex suspension array. All six Gag and Env proteins (p10, p12, p15, p30, gp70 and p15E), from the xenotropic murine leukemia virus-related virus (XMRV), were prepared, allowing the creation of a multiepitope XMRV antibody assay. The procedure is generic and allows production of protein antigens ready for serological testing in a few working days. Instability and aggregation problems were circumvented by expression of viral proteins fused to a carrier protein (thioredoxin A; TrxA), purification via inclusion body formation, urea solubilization, His tag affinity chromatography and direct covalent coupling to microspheres without removal of the elution buffer. The yield of one preparation (2-10mg fusion protein per 100ml culture) was enough for 20-100 coupling reactions, sufficing for tests of many tens of thousands of sera. False serological positivity due to antibodies binding to TrxA and to traces of E. coli proteins remaining in the preparation could be reduced by preabsorption of sera with free TrxA and E. coli extract. The recombinant antigens were evaluated using anti-XMRV antibodies. Although hybrid proteins expressed in E. coli in this way will not have the entire tertiary structure and posttranslational modifications of the native proteins, they contain a large subset of the epitopes associated with them. The described strategy is simple, quick, efficient and cheap. It should be applicable for suspension array serology in general.

An overview of enzymatic reagents for the removal of affinity tags

Although they are often exploited to facilitate the expression and purification of recombinant proteins, every affinity tag, whether large or small, has the potential to interfere with the structure and function of its fusion partner. For this reason, reliable methods for removing affinity tags are needed. Only enzymes have the requisite specificity to be generally useful reagents for this purpose. In this review, the advantages and disadvantages of some commonly used endo- and exoproteases are discussed in light of the latest information.

Design and efficient production of bovine enterokinase light chain with higher specificity in E. coli

Enterokinase light chain (EKL) is a serine protease that recognizes Asp-Asp-Asp-Asp-Lys (D(4)K) sequence and cleaves the C-terminal peptide bond of the lysine residue. The utility of EKL as a site-specific cleavage enzyme is hampered by sporadic cleavage at other sites than the canonical D(4)K recognition sequence. In order to produce more site-specific EKL, we have generated several EKL mutants in E. coli with substitutions at Tyr174 and Lys99 using PDI (protein disulfide isomerase) fusion system. Substitution of Tyr174 by basic residues confers higher specificity on EKL. The production of EKL with higher specificity could widen the utility of EKL as a site-specific cleavage enzyme to produce various recombinant proteins with therapeutic or industrial values.

Strategies to optimize protein expression in E. coli

Recombinant protein expression in Escherichia coli (E. coli) is simple, fast, inexpensive, and robust, with the expressed protein comprising up to 50 percent of the total cellular protein. However, it also has disadvantages. For example, the rapidity of bacterial protein expression often results in unfolded/misfolded proteins, especially for heterologous proteins that require longer times and/or molecular chaperones to fold correctly. In addition, the highly reductive environment of the bacterial cytosol and the inability of E. coli to perform several eukaryotic post-translational modifications results in the insoluble expression of proteins that require these modifications for folding and activity. Fortunately, multiple, novel reagents and techniques have been developed that allow for the efficient, soluble production of a diverse range of heterologous proteins in E. coli. This overview describes variables at each stage of a protein expression experiment that can influence solubility and offers a summary of strategies used to optimize soluble expression in E. coli.

Strategies for successful recombinant expression of disulfide bond-dependent proteins in Escherichia coli

Bacteria are simple and cost effective hosts for producing recombinant proteins. However, their physiological features may limit their use for obtaining in native form proteins of some specific structural classes, such as for instance polypeptides that undergo extensive post-translational modifications. To some extent, also the production of proteins that depending on disulfide bridges for their stability has been considered difficult in E. coli.

Both eukaryotic and prokaryotic organisms keep their cytoplasm reduced and, consequently, disulfide bond formation is impaired in this subcellular compartment. Disulfide bridges can stabilize protein structure and are often present in high abundance in secreted proteins. In eukaryotic cells such bonds are formed in the oxidizing environment of endoplasmic reticulum during the export process. Bacteria do not possess a similar specialized subcellular compartment, but they have both export systems and enzymatic activities aimed at the formation and at the quality control of disulfide bonds in the oxidizing periplasm.

This article reviews the available strategies for exploiting the physiological mechanisms of bactera to produce properly folded disulfide-bonded proteins.

Generation of monoclonal antibodies against Escherichia coli DsbA

Disulfide oxidoreductase A (also known as disulfide bond formation protein A, or DsbA) is produced in Escherichia coli (E. coli) periplasm, which plays an important role in correct formulation of disulfide bonds during protein exportation in vivo. DsbA prokaryotic expression vectors are designed for periplasmic co-expression of recombinant proteins with an improving secretion. In the present study, the first domain of human CD226 (CD226D1) was expressed as a His-tagged fusion protein with DsbA and purified by Ni-NTA resin. Three monoclonal antibodies (MAbs) against DsbA were raised by using the recombinant fusion protein as immunogen. We have demonstrated that one of them can detect DsbA via Western blotting, in addition to its ability to immunoprecipitate DsbA fusion protein. Furthermore, anti-DsbA MAb can be employed to prepare antibody-coupled affinity column for purification of DsbA fusion protein from E. coli lysate.

Expression, purification and characterization of human urodilatin in E. coli

Urodilatin is a 32-amino acid peptide hormone synthesized in kidney to regulate natriuresis and diuresis. It has been shown clinically useful for the treatment of acute decompensated heart failure. A synthetic deoxyoligonucleotide encoding urodilatin was cloned into a pET32a vector immediately after the thioredoxin encoding sequence with a hexa-hisditine tag and an enterokinase recognition site incorporated in between. The fusion protein was overexpressed in Escherichia coli, which constituted 28% of the total cell proteins. More than 85% of Trx-urodilatin was soluble and purified nearly homogenous by Ni-Sepharose affinity chromatography. Urodilatin was then released from the fusion protein by the enterokinase treatment and separated from the fusion partner by the subtractive chromatography using Ni-Sepharose once again. The urodilatin sample was further purified with reverse phase HPLC. Via a biological activity assayed in vitro, it was found that urodilatin had a potent vasodilatory effect on rabbit aortic strips with an EC50 of (2.02+/-0.36)x10(-6)mg/ml, which was similar to that of the synthetic urodilatin standard. The method described here promises to produce about 4.5mg fully active recombinant urodilatin with homogeneity over 97% from one liter shaking flask culture of E. coli.

Purification and refolding optimization of recombinant bovine enterokinase light chain overexpressed in Escherichia coli

The nucleotide sequence encoding bovine enterokinase light chain (EK) from Chinese northern yellow bovine was isolated. Two single-nucleotide mutations, namely, C245G and A528T were identified. The gene encoding the Pro82Arg/Glu176Asp variant of known bovine EK was fused with glutathione S-transferase and overexpressed mainly as an inclusion body in Escherichia coli BL21 (DE3), upon induction with IPTG and glucose. Effective fusion protein purification, refolding, auto-catalytic cleavage and mature EK recovery were described. The specific activity of the purified EK was determined as 110+/- 10 U/mg, which was comparable to a specific activity of > or =20 U/mg of the E. coli expressed EK sample provided by Sigma (Cat. No. E4906). This procedure produced approximately 53 mg of EK per 500 mL of cell culture, which was much higher than previous reports, thus providing a basis for large-scale production of EK and for further applications in biotechnology.

Specificity of the medaka enteropeptidase serine protease and its usefulness as a biotechnological tool for fusion-protein cleavage

We cloned two distinct cDNAs for enteropeptidase (EP) from the intestine of the medaka, Oryzias latipes, which is a small freshwater teleost. The mRNAs code for EP-1 (1,036 residues) and EP-2 (1,043 residues), both of which have a unique, conserved domain structure of the N-terminal heavy chain and C-terminal catalytic serine protease light chain. When compared with mammalian EP serine proteases, the medaka enzyme exhibited extremely low amidolytic activity for small synthetic peptide substrates. Twelve mutated forms of the medaka EP protease were produced by site-directed mutagenesis. Among them, one mutant protease, E173A, was found to have considerably reduced nonspecific hydrolytic activities both for synthetic and protein substrates without serious reduction of its Asp-Asp-Asp-Asp-Lys (D(4)K)-cleavage activity. For the cleavage of fusion proteins containing a D(4)K-cleavage site, the medaka EP proteases were shown to have advantages over their mammalian counterparts. Based on our present data, we propose that the E173A mutant is the most appropriate protease to specifically cleave proteins containing the D(4)K cleavage sequence.

Expression and purification of a recombinant antibacterial peptide, cecropin, from Escherichia coli

Insect cecropins are small basic polypeptides synthesized in fat body and hemocytes in response to bacterial infections or hypodermic injuries. To explore a new approach for high expression of soluble cecropin in Escherichia coli cells, we fused the sequence encoding Musca domestica mature cecropin (named Mdmcec) in-frame to thioredoxin (TRX) gene to construct an expression vector pTRX-6His-Mdmcec. An enterokinase cleavage site was introduced between the 6xHis-tag and Mdmcec to facilitate final release of the recombinant Mdmcec. The fusion protein TRX-6His-Mdmcec was purified successfully by HisTrap HP affinity column and a high yield of 48.0mg purified fusion protein was obtained from 1L culture. Recombinant Mdmcec was readily obtained by enterokinase cleavage of the fusion protein followed by HPLC chromatography, and 11.2mg pure active recombinant Mdmcec was obtained from 1L E. coli culture. The molecular mass of recombinant Mdmcec determined by electrospray ionization-mass spectrometry (ESI-MS) is identical to that of native cecropin. Analysis of recombinant Mdmcec by circular dichroism (CD) indicated that recombinant Mdmcec contained predominantly alpha-helix with some random coil. Antimicrobial activity assays demonstrated that recombinant Mdmcec had a broad spectrum of activity against fungi, Gram-positive and negative bacteria. The procedure described in this study will provide a reliable and simple method for production of different cationic peptides for biological studies.

An SRLLR motif downstream of the scissile bond enhances enterokinase cleavage efficiency

In a previous paper, we reported more efficient enterokinase cleavage at a C-terminal non-target LKGDR(201) site compared with an internally sited canonical recognition site, DDDDK(156). When this non-target site was placed internally to replace DDDDK(156) between the thioredoxin moiety and mouse NT-proCNP(1-50), this site was poorly processed leading us to conclude that efficient processing at LKGDR(201) in the first instance was due to its accessibility at the C-terminus of the fusion protein. Subsequently, we reasoned that treatment of thioredoxin-fused NT-proCNP(1-81) would allow us to retrieve full-length NT-proCNP(1-81) without undue processing at the LKGDR(201) site since this non-target site would now be located internally about 36 residues away from the C-terminus and hence not be hydrolyzed efficiently. Surprisingly, ESI-MS data showed that the LKGDR site in thioredoxin-fused human NT-proCNP(1-81) was still very efficiently cleaved and revealed a new but slow hydrolysis site with the sequence RVDTK/SRAAW to yield a peptide consistent with NT-proCNP(58-81). The evidence obtained from these experiments led us to postulate that efficient cleavage at the non-target LKGDR(201) site was not merely influenced by steric constraints but also by the sequence context downstream of the scissile bond. Hence, we constructed variants of thioredoxin-mouse NT-proCNP(1-50) where SRLLR residues (i.e. those immediately downstream from the LKGDR(201) site in NT-proCNP(1-50)) were systematically added one at a time downstream of the internal DDDDK(156) site. To evaluate the relative effects of site accessibility and downstream sequence context on the efficiency of enterokinase cleavage, we have also replaced the native LKGDR(201) sequence with DDDDK(201). Our results showed that incremental addition of SRLLR residues led to a steady increase in the rate of hydrolysis at DDDDK(156). Further variants comprising DDDDK(156)SS, DDDDK(156)SD and DDDDK(156)RR showed that the minimal critical determinants for enhanced enterokinase cleavage are serine in the P1' position followed by a serine or a basic residue, lysine or arginine, in the P2' position. Our data provided conclusive evidence that the influence of downstream sequences on recombinant light chain enterokinase activity was greater than accessibility of the target site at the terminus region of the protein. We further showed that the catalytic efficiency of the native holoenzyme was influenced primarily by residues on the N-terminal side of the scissile bond while being neutral to residues on the C-terminal side. Finally, we found that cleavage of all nine fusion proteins reflects accurate hydrolysis at the DDDDK(156) and DDDDK(201) sites when recombinant light chain enterokinase was used while non-specific processing at secondary sites were observed when these fusion proteins were treated with the native holoenzyme.

A novel fusion protein system for the production of native human pepsinogen in the bacterial periplasm

Human pepsinogen is the secreted inactive precursor of pepsin. Under the acidic conditions present in the stomach it is autocatalytically cleaved into the active protease. Pepsinogen contains three consecutive disulfides, and was used here as a model protein to investigate the production of aspartic proteases in the Escherichia coli periplasm. Various N-terminal translocation signals were applied and several different expression vectors were tested. After fusion to pelB, dsbA or ompT signal peptides no recombinant product could be obtained in the periplasm using the T7 promoter. As a new approach, human pepsinogen was fused to E. coli ecotin (E. coli trypsin inhibitor), which is a periplasmic homodimeric protein of 142 amino acids per monomer containing one disulfide bridge. The fusion protein was expressed in pTrc99a. After induction, the ecotin-pepsinogen fusion protein was translocated into the periplasm and the ecotin signal peptide was cleaved. Upon acid treatment, the fusion protein was converted into pepsin, indicating that pepsinogen was produced in its native form. In shake flasks experiments, the amount of active fusion protein present in the periplasm was 100 microg per litre OD 1, corresponding to 70 microg pepsinogen. After large scale cultivation, the fusion protein was isolated from the periplasmic extract. It was purified to homogeneity with a yield of 20%. The purified protein was native. Acid-induced activation of the fusion protein proceeded very fast. As soon as pepsin was present, the ecotin part of the fusion protein was rapidly digested, followed by a further activation of pepsinogen.

Simplified screening for the detection of soluble fusion constructs expressed in E. coli using a modular set of vectors

BACKGROUND

The solubility of recombinant proteins expressed in bacteria is often disappointingly low. Several strategies have been developed to improve the yield and one of the most common strategies is the fusion of the target protein with a suitable partner. Despite several reports on the successful use of each of these carriers to increase the solubility of some recombinant proteins, none of them was always successful and a combinatorial approach seems more efficient to identify the optimal combination for a specific protein. Therefore, the efficiency of an expression system critically depends on the speed in the identification of the optimal combination for the suitable fusion candidate in a screening process. This paper describes a set of expression vectors (pETM) designed for rapid subcloning, expression and subsequent purification using immobilized metal affinity chromatography (IMAC).

RESULTS

A single PCR product of two Yellow Fluorescent Proteins (EYFPs) was cloned into 18 vectors comprising identical restriction sites and varying fusion partners as well as differing protease recognition sites. After a small-scale expression, the yields of the different constructs were compared using a Coomassie stained SDS-polyacrylamide gel and the results of this preliminary screening were then confirmed by large-scale purification. The yields were calculated and the stability of the different constructs determined using three independent conditions. The results indicated a significant correlation between the length and composition of non-native amino acid tails and stability. Furthermore, the buffer specificity of TEV and 3C proteases was tested using fusion proteins differing only in their protease recognition sequence, and a His-GST-EYFP construct was employed to compare the efficiency of the two alternative affinity purification methods.

CONCLUSION

The experiments showed that the set of pETM vectors could be used for the rapid production of a large array of different constructs with specific yield, stability, and cleavage features. Their comparison allowed the identification of the optimal constructs to use for the large-scale expression. We expect that the approach outlined in this paper, i.e. the possibility to obtain in parallel fusion products of the target protein with different partners for a preliminary evaluation, would be highly beneficial for all them who are interested in the rapid identification of the optimal conditions for protein expression.

Preparation of recombinant thioredoxin fused N-terminal proCNP: Analysis of enterokinase cleavage products reveals new enterokinase cleavage sites

C-type natriuretic peptide (CNP) acts as a paracrine hormone to dilate blood vessels and is also required for the growth of long bones. In vivo, CNP is produced by cleavage from the C-terminal end of a larger proCNP peptide. The remaining N-terminal proCNP fragment (NT-proCNP) escapes into the circulation where its concentration is much higher than that of CNP due presumably to a lower clearance rate. Our strategy to obtain large quantities of pure NT-proCNP for further physiological investigations was to express it as a fusion protein with His(6)-tagged thioredoxin followed by cleavage using enterokinase to yield NT-proCNP alone. We have successfully designed and artificially synthesized the coding sequence specifying both mouse and human NT-proCNP with built-in codon bias towards Escherichia coli codon preference. An enterokinase recognition sequence was incorporated immediately upstream of the NT-proCNP coding sequence to allow the fusion protein to be cleaved without leaving any extra residues on the NT-proCNP peptide. High levels of fusion proteins were obtained, constituting 50-58% of total bacterial proteins. Greater than 90% of recombinant thioredoxin/NT-proCNP was expressed in the soluble form and purified to near homogeneity in a single chromatographic step using nickel as the metal ion in IMAC. A time course analysis of the products released from enterokinase cleavage of the recombinant proteins by ESI-MS revealed three sensitive secondary cleavage sites: two were located on vector-associated sequences linking the thioredoxin moiety and NT-proCNP, and one at the C-terminal end of NT-proCNP. Clearly, substrate specificity of both the native and recombinant forms of enterokinase for the recognition sequence DDDDK was by no means exclusive. Hydrolysis at the unexpected LKGDR site located towards the carboxyl end on NT-proCNP was significantly more efficient than at the internally sited DDDDK target sequence. However, when this same sequence was sited internally replacing the DDDDK in another construct of thioredoxin/mouse NT-proCNP, it was found to be poorly processed by enterokinase. Our results showed that non-target sequences can be preferentially recognized over the canonical DDDDK sequence when located accessibly at the ends of proteins.

Advanced genetic strategies for recombinant protein expression in Escherichia coli

Preparations enriched by a specific protein are rarely easily obtained from natural host cells. Hence, recombinant protein production is frequently the sole applicable procedure. The ribosomal machinery, located in the cytoplasm is an outstanding catalyst of recombinant protein biosynthesis. Escherichia coli facilitates protein expression by its relative simplicity, its inexpensive and fast high-density cultivation, the well-known genetics and the large number of compatible tools available for biotechnology. Especially the variety of available plasmids, recombinant fusion partners and mutant strains have advanced the possibilities with E. coli. Although often simple for soluble proteins, major obstacles are encountered in the expression of many heterologous proteins and proteins lacking relevant interaction partners in the E. coli cytoplasm. Here we review the current most important strategies for recombinant expression in E. coli. Issues addressed include expression systems in general, selection of host strain, mRNA stability, codon bias, inclusion body formation and prevention, fusion protein technology and site-specific proteolysis, compartment directed secretion and finally co-overexpression technology. The macromolecular background for a variety of obstacles and genetic state-of-the-art solutions are presented.

Bacillus subtilis as cell factory for pharmaceutical proteins: a biotechnological approach to optimize the host organism

Bacillus subtilis is a rod-shaped, Gram-positive soil bacterium that secretes numerous enzymes to degrade a variety of substrates, enabling the bacterium to survive in a continuously changing environment. These enzymes are produced commercially and this production represents about 60% of the industrial-enzyme market. Unfortunately, the secretion of heterologous proteins, originating from Gram-negative bacteria or from eukaryotes, is often severely hampered. Several bottlenecks in the B. subtilis secretion pathway, such as poor targeting to the translocase, degradation of the secretory protein, and incorrect folding, have been revealed. Nevertheless, research into the mechanisms and control of the secretion pathways will lead to improved Bacillus protein secretion systems and broaden the applications as industrial production host. This review focuses on studies that aimed at optimizing B. subtilis as cell factory for commercially interesting heterologous proteins.

The solubility and stability of recombinant proteins are increased by their fusion to NusA

The new bacterial vector pETM60 enables the expression of His-tagged recombinant proteins fused to the C-terminus of NusA through a TEV protease recognition sequence. Three sequences coding for two protein domains (Xklp3A and Tep3Ag) and one membrane-bound viral protein (E8R) could not be expressed in a soluble form in bacteria. Their GST-fusions were mostly soluble but quickly degraded during purification. The same sequences cloned in pETM60 were efficiently purified by metal affinity and recovered soluble after the removal of the fusion partner. The NusA-fused constructs enabled to yield 13-20mg of fusion protein per litre of culture and 2.5-5mg of pure protein per litre of culture. Structural analysis indicated that the purified proteins were monodispersed and correctly folded. NusA has been used to raise antibodies that have been successfully used for Western blot and immunoprecipitation of NusA fusion proteins.

High-level secretory production of recombinant bovine enterokinase light chain by Pichia pastoris

Enterokinase (EC 3.4.21.9) is a serine proteinase with a specific digest sequence (Asp)4-Lys in the duodenum. Its high specificity for the recognition site makes enterokinase (EK) a useful tool for an in vitro cleavage of fusion proteins. In this work, an active bovine enterokinase light chain (EK(L)) was produced in secretory form by a recombinant strain of the methylotrophic yeast Pichia pastoris. The influences of methanol utilization phenotype of the host strain, induction pH, and carbon source on the recombinant production were studied. The production of recombinant EK(L) by Mut(s) strain was much higher than that by Mut+ strain. When inducted at pH 6.0, on a glycerol/methanol medium, the concentration of recombinant EK(L) (rEK(L)) reached 350 mg l(-1), which was 20-fold higher than that reported previously. The recombinant EK(L) was purified in a simple procedure on the anion exchange chromatography and 15 mg pure active EK(L) were obtained from 100 ml culture broth supernatant. The specific activity of purified rEK(L) was approximately 9000 u mg(-1). To facilitate purification and removal of rEKL after cleavage of fusion protein, the C-terminal His-tagged EK(L) (EK(L)/His) was also expressed in P. pastoris, and this His-tagged EK(L) exhibited a similar enzymatic activity to the untagged EK(L).

New Strategies in Polypeptide and Antibody Synthesis: An Overview

The synthesis of radioligands can benefit considerably from optimized recombinant protein production, both on the aspect of economy of production and on the level of improving the targeting and pharmacokinetics of the ligand. This paper first describes a general production optimization strategy, and then elaborates on a protein design strategy tailored to targeting applications. Production in Escherichia coli will benefit from economy of goods and time as compared to other organisms. In order to increase the chance of finding a successful production system in this host, we have assembled a large number of expression strategies in a single, uniform expression system (FastScreen). The system allows rapid optimization of direct production of native proteins or via a fusion protein strategy with subsequent recovery of the desired protein. As an example of recombinant radioligand synthesis for improved targeting and clearing, a manifold of intermediate molecular size was synthesized by fusing one Fab and two single-chain variable fragments (scFv) antibody binding fragments into a trifunctional molecule (Tribody). Due to the use of the specific heterodimerization of the Fab chains, trispecific, bispecific, or trivalent antibody derived targeting reagents can easily be obtained. Recombinant production techniques also allow for specific incorporation of amino acids favoring a site specific labeling (labeling tags).