Enhancing the magnetic anisotropy of maghemite nanoparticles via the surface coordination of molecular complexes

Room-temperature-persistent magnetic interaction between coordination complexes and nanoparticles in maghemite-based nanohybrids

Maghemite nanoparticles functionalised with Co(II) coordination complexes at their surface show a significant increase of their magnetic anisotropy, leading to a doubling of the blocking temperature and a sixfold increase of the coercive field. Magnetometric studies suggest an enhancement that is not related to surface disordering, and point to a molecular effect involving magnetic exchange interactions mediated by the oxygen atoms at the interface as its source. Field- and temperature-dependent X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD) studies show that the magnetic anisotropy enhancement is not limited to surface atoms and involves the core of the nanoparticle. These studies also point to a mechanism driven by anisotropic exchange and confirm the strength of the magnetic exchange interactions. The coupling between the complex and the nanoparticle persists at room temperature. Simulations based on the XMCD data give an effective exchange field value through the oxido coordination bridge between the Co(II) complex and the nanoparticle that is comparable to the exchange field between iron ions in bulk maghemite. Further evidence of the effectiveness of the oxido coordination bridge in mediating the magnetic interaction at the interface is given with the Ni(II) analog to the Co(II) surface-functionalised nanoparticles. A substrate-induced magnetic response is observed for the Ni(II) complexes, up to room temperature.

Challenges for exploiting nanomagnet properties on surfaces

Molecular complexes with single-molecule magnet (SMM) or qubit properties, commonly called molecular nanomagnets, are great candidates for information storage or quantum information processing technologies. However, the implementation of molecular nanomagnets in devices for the above-mentioned applications requires controlled surface deposition and addressing the nanomagnets' properties on the surface. This Perspectives paper gives a brief overview of molecular properties on a surface relevant for magnetic molecules and how they are affected when the molecules interact with a surface; then, we focus on systems of increasing complexity, where the relevant SMMs and qubit properties have been observed for the molecules deposited on surfaces; finally, future perspectives, including possible ways of overcoming the problems encountered so far are discussed.

Co-exposure of iron oxide nanoparticles with glyphosate herbicides in Poecilia reticulata: Fish liver damages is reversible during iron accumulation and elimination period

Iron oxide nanoparticles (IONPs) are advanced materials for water remediation technologies. It is therefore relevant to evaluate the cellular and tissue behavior of fishes in response to IONPs and their associations with agrochemicals such as glyphosate (GLY) and glyphosate-based herbicides (GBHs). Iron accumulation, tissue integrity and lipid distribution in the hepatocytes of Poecilia reticulata (guppy) were investigated in a control group and in groups exposed to soluble iron ions, namely IFe (0.3 mgFe/L), IONPs (0.3 mgFe/L), and IONPs, associated with GLY (0.65 mg/L), GBHs 0.65 mgGLY/L (IONPs + GBH1), and 1.30 mgGLY/L (IONPs + GBH2), for 7, 14, and 21 days, followed by an equal period of postexposure in clean reconstituted water. The results showed that the accumulation of iron was greater in the subjects in the IONP treatment group when compared to that in the Ife group. In addition, the subjects in the mixtures with GBHs had a greater accumulation of iron than those in the IONP + GLY treatment group. Tissue integrity assessments demonstrated an intense accumulation of lipids, formation of necrotic zones and leukocyte infiltrates in all the treated groups, with a greater quantity of lipids in the animals treated with IONP + GLY and IFe. During postexposure, the results indicated an elimination of iron in all treated groups, reaching the same level as the control group, throughout the 21 days postexposure. Thus, the damage caused to animal livers by IONP mixtures is reversible, providing promising results for the development of safe environmental remediation practices using nanoparticles.

Superparamagnetic Spinel-Ferrite Nano-Adsorbents Adapted for Hg2+, Dy3+, Tb3+ Removal/Recycling: Synthesis, Characterization, and Assessment of Toxicity

In the present work, superparamagnetic adsorbents based on 3-aminopropyltrimethoxy silane (APTMS)-coated maghemite (γFe₂O₃@SiO₂-NH₂) and cobalt ferrite (CoFe₂O₄@SiO₂-NH₂) nanoparticles were prepared and characterized using transmission-electron microscopy (TEM/HRTEM/EDXS), Fourier-transform infrared spectroscopy (FTIR), specific surface-area measurements (BET), zeta potential (ζ) measurements, thermogravimetric analysis (TGA), and magnetometry (VSM). The adsorption of Dy³⁺, Tb³⁺, and Hg²⁺ ions onto adsorbent surfaces in model salt solutions was tested. The adsorption was evaluated in terms of adsorption efficiency (%), adsorption capacity (mg/g), and desorption efficiency (%) based on the results of inductively coupled plasma optical emission spectrometry (ICP-OES). Both adsorbents, γFe₂O₃@SiO₂-NH₂ and CoFe₂O₄@SiO₂-NH₂, showed high adsorption efficiency toward Dy³⁺, Tb³⁺, and Hg²⁺ ions, ranging from 83% to 98%, while the adsorption capacity reached the following values of Dy³⁺, Tb³⁺, and Hg²⁺, in descending order: Tb (4.7 mg/g) > Dy (4.0 mg/g) > Hg (2.1 mg/g) for γFe₂O₃@SiO₂-NH₂; and Tb (6.2 mg/g) > Dy (4.7 mg/g) > Hg (1.2 mg/g) for CoFe₂O₄@SiO₂-NH₂. The results of the desorption with 100% of the desorbed Dy³⁺, Tb³⁺, and Hg²⁺ ions in an acidic medium indicated the reusability of both adsorbents. A cytotoxicity assessment of the adsorbents on human-skeletal-muscle derived cells (SKMDCs), human fibroblasts, murine macrophage cells (RAW264.7), and human-umbilical-vein endothelial cells (HUVECs) was conducted. The survival, mortality, and hatching percentages of zebrafish embryos were monitored. All the nanoparticles showed no toxicity in the zebrafish embryos until 96 hpf, even at a high concentration of 500 mg/L.

Role of Dipolar Interactions on the Determination of the Effective Magnetic Anisotropy in Iron Oxide Nanoparticles

Challenging magnetic hyperthermia (MH) applications of immobilized magnetic nanoparticles require detailed knowledge of the effective anisotropy constant (K_eff ) to maximize heat release. Designing optimal MH experiments entails the precise determination of magnetic properties, which are, however, affected by the unavoidable concurrence of magnetic interactions in common experimental conditions. In this work, a mean-field energy barrier model (ΔE), accounting for anisotropy (E_A ) and magnetic dipolar (E_D ) energy, is proposed and used in combination with AC measurements to a specifically developed model system of spherical magnetic nanoparticles with well-controlled silica shells, acting as a spacer between the magnetic cores. This approach makes it possible to experimentally demonstrate the mean field dipolar interaction energy prediction with the interparticle distance, d_ij , E_D ≈ 1/d_ij ³ and obtain the E_A as the asymptotic limit for very large d_ij . In doing so, K_eff uncoupled from interaction contributions is obtained for the model system (iron oxide cores with average sizes of 8.1, 10.2, and 15.3 nm) revealing to be 48, 23, and 11 kJ m^-3 , respectively, close to bulk magnetite/maghemite values and independent from the specific spacing shell thicknesses selected for the study.

Surface functionalization of inorganic nanoparticles with ligands: a necessary step for their utility

The importance of protecting inorganic nanoparticles with organic ligands and thus imparting the needed stabilization as colloidal dispersions for their potential applications is highlighted in this review.

Hardening of Cobalt Ferrite Nanoparticles by Local Crystal Strain Release: Implications for Rare Earth Free Magnets

In this work, we demonstrate that the reduction of the local internal stress by a low-temperature solvent-mediated thermal treatment is an effective post-treatment tool for magnetic hardening of chemically synthesized nanoparticles. As a case study, we used nonstoichiometric cobalt ferrite particles of an average size of 32(8) nm synthesized by thermal decomposition, which were further subjected to solvent-mediated annealing at variable temperatures between 150 and 320 °C in an inert atmosphere. The postsynthesis treatment produces a 50% increase of the coercive field, without affecting neither the remanence ratio nor the spontaneous magnetization. As a consequence, the energy product and the magnetic energy storage capability, key features for applications as permanent magnets and magnetic hyperthermia, can be increased by ca. 70%. A deep structural, morphological, chemical, and magnetic characterization reveals that the mechanism governing the coercive field improvement is the reduction of the concomitant internal stresses induced by the low-temperature annealing postsynthesis treatment. Furthermore, we show that the medium where the mild annealing process occurs is essential to control the final properties of the nanoparticles because the classical annealing procedure (T > 350 °C) performed on a dried powder does not allow the release of the lattice stress, leading to the reduction of the initial coercive field. The strategy here proposed, therefore, constitutes a method to improve the magnetic properties of nanoparticles, which can be particularly appealing for those materials, as is the case of cobalt ferrite, currently investigated as building blocks for the development of rare-earth free permanent magnets.

Towards large area surface functionalization with luminescent and magnetic lanthanoid complexes

Homogeneous surface deposition of molecules over a large area of substrate is difficult to achieve but extremely important for proposed applications of magnetic molecules in data storage, information processing or...

Heterometallic Co-Dy SMMs grafted on iron oxide nanoparticles

Heterometallic 3d-4f SMM [Co4Dy(OH)2(SALOH)5(chp)4(MeCN)(H2O)2] (1) has been deposited onto iron oxide nanoparticles (NPs) with an oleate self-assembled monolayer (SAM) as a surfactant. The obtained hybrid molecular-inorganic system 1-NP has been thoroughly characterized. The oleate SAM separates SMM 1 from the magnetic substrate to avoid the strong-coupling between the surface and molecule to ensure that 1 retains its magnetic properties in 1-NP. The magnetic properties of the hybrid system 1-NP have been characterized by element specific XMCD: the heterometallic SMM retains its magnetic properties on the surface of the iron oxide NPs while there is an enhancement of the magnetic properties of the NPs.

Magnetism of Nanoparticles: Effect of the Organic Coating

The design of novel multifunctional materials based on nanoparticles requires tuning of their magnetic properties, which are strongly dependent on the surface structure. The organic coating represents a unique tool to significantly modify the surface structure trough the bonds between the ligands of the organic molecule and the surface metal atoms. This work presents a critical overview of the effects of the organic coating on the magnetic properties of nanoparticles trough a selection of papers focused on different approaches to control the surface structure and the morphology of nanoparticles’ assemblies.

Morphology-Tunable Synthesis of Intrinsic Room-Temperature Ferromagnetic γ-Fe2O3 Nanoflakes

Intrinsic two-dimensional (2D) magnetic materials with room-temperature ferromagnetism and air stability are highly desirable for spintronic applications. However, the experimental observations of such 2D or ultrathin ferromagnetic materials are rarely reported owing to the scarcity of these materials in nature and for the intricacy in their synthesis. Here, we report a successful controllable growth of ultrathin γ-Fe₂O₃ nanoflakes with a variety of morphologies tunable by the growth temperature alone using a facile chemical vapor deposition method and demonstrate that all ultrathin nanoflakes still show intrinsic room-temperature ferromagnetism and a semiconducting nature. The γ-Fe₂O₃ nanoflakes epitaxially grown on α-Al₂O₃ substrates take a triangular shape at low temperature and develop gradually in lateral size, forming eventually a large-scale γ-Fe₂O₃ thin film as the growth time increases due to a thermodynamic control process. The morphology of the nanoflakes could be tuned from triangular to stellated, petaloid, and dendritic crystalloids in sequence with the rise of precursor temperature, revealing a growth process from thermodynamically to kinetically dominated control. Moreover, the petaloid and dendritic nanoflakes exhibit enhanced coercivity compared with the triangular and stellated nanoflakes, and all the nanoflakes with diverse shapes possess differing electrical conductivity. The findings of such ultrathin, air-stable, and room-temperature ferromagnetic γ-Fe₂O₃ nanoflakes with tunable shape and multifunctionality may offer guidance in synthesizing other non-layered magnetic materials for next-generation electronic and spintronic devices.

Understanding the Effects of Iron Precursor Ligation and Oxidation State Leads to Improved Synthetic Control for Spinel Iron Oxide Nanocrystals

Iron oxide nanocrystals have the potential for use in a wide variety of applications if we can finely control and tune the diverse structural attributes that lead to specific, desired properties. At the high temperatures utilized for thermal decomposition based syntheses, commonly used Fe(III) alkylcarboxylate precursors are inadvertently reduced and produce wüstite (FeO), which is paramagnetic, as opposed to the desired ferrimagnetic spinel phases of magnetite (Fe₃O₄) and maghemite (γ-Fe₂O₃). To circumvent this issue, we carried out syntheses at lower temperatures (∼230 °C) using an esterification-mediated approach. Under these conditions, formation of the FeO phase can be avoided. However, we found that the precursor oxidation state and ligation had a surprisingly strong influence on the morphologies of the resulting nanocrystals. To investigate the cause of these morphological effects, we carried out analogous nanocrystal syntheses with a series of precursors. The use of Fe(III) oleate precursors yielded highly crystalline, largely twin-free nanocrystals; however, small amounts of acetylacetonate ligation yielded nanocrystals with morphologies characteristic of twin defects. During synthesis at 230 °C, the Fe(III) oleate precursor is partially reduced, providing sufficient quantities of Fe(II) that are needed to grow the Fe₃O₄ nanocrystals (wherein one-third of the iron atoms are in the Fe(II) state) without twinning. Our investigations suggest that the acetylacetonate ligands prevent reduction of Fe(III) to Fe(II), leading to twinned structures during synthesis. Harnessing this insight, we identified conditions to predictably and continuously grow octahedral, spinel nanocrystals as well as conditions to synthesize highly twinned nanocrystals. These findings also help explain observations in the thermal decomposition synthesis literature which suggest that iron oxide nanocrystals produced from Fe(acac)₃ are less prone to FeO contamination in comparison to those produced from Fe(III) alkylcarboxylates.

New Perspectives on Iron-Based Nanostructures

Among all minerals, iron is one of the elements identified early by human beings to take advantage of and be used. The role of iron in human life is so great that it made an era in the ages of humanity. Pure iron has a shiny grayish-silver color, but after combining with oxygen and water it can make a colorful set of materials with divergent properties. This diversity sometimes appears ambiguous but provides variety of applications. In fact, iron can come in different forms: zero-valent iron (pure iron), iron oxides, iron hydroxides, and iron oxide hydroxides. By taking these divergent materials into the nano realm, new properties are exhibited, providing us with even more applications. This review deals with iron as a magic element in the nano realm and provides comprehensive data about its structure, properties, synthesis techniques, and applications of various forms of iron-based nanostructures in the science, medicine, and technology sectors.

Effect of albumin mediated clustering on the magnetic behavior of MnFe2O4 nanoparticles: experimental and theoretical modeling study

Over the last two decades, iron oxide based nanoparticles ferrofluids have attracted significant attention for a wide range of applications. For the successful use of these materials in biotechnology and energy, surface coating and specific functionalization is critical to achieve high dispersibility and colloidal stability of the nanoparticles in the ferrofluids. In view of this, the magnetic behavior of clusters of ultra-small MnFe₂O₄ nanoparticles covered by bovine serum albumin, which is known as a highly biocompatible and environmentally friendly surfactant, is investigated by magnetization measurements, and numerical simulations at an atomic and mesoscopic scale. The coating process with albumin produces a change in the structure, actual size and shape distribution of clusters of exchange coupled particles, giving rise to a distribution of blocking temperatures. The coated system exhibits a superspin glass (SSG) behavior with the SSG freezing temperatures similar to the uncoated ones, providing evidence that the strength of the dipolar interactions is not affected by the presence of the albumin. The DFT calculations show that the albumin coating reduces the surface anisotropy and the saturation magnetization in the nanoparticles leading to lower values of the coercive field in agreement with the experimental findings. Our results clearly demonstrate that the albumin coated clusters of MnFe₂O₄ particles are ideal systems for energy and biomedical applications since colloidal and thermal stability as well as biosafety is obtained through the albumin coating.

Strontium hexaferrite platelets: a comprehensive soft X-ray absorption and Mössbauer spectroscopy study

Platelets of strontium hexaferrite (SrFe₁₂O₁₉, SFO), up to several micrometers in width, and tens of nanometers thick have been synthesized by a hydrothermal method. They have been studied by a combination of structural and magnetic techniques, with emphasis on Mössbauer spectroscopy and X-ray absorption based-measurements including spectroscopy and microscopy on the iron-L edges and the oxygen-K edge, allowing us to establish the differences and similarities between our synthesized nanostructures and commercial powders. The Mössbauer spectra reveal a greater contribution of iron tetrahedral sites in platelets in comparison to pure bulk material. For reference, high-resolution absorption and dichroic spectra have also been measured both from the platelets and from pure bulk material. The O-K edge has been reproduced by density functional theory calculations. Out-of-plane domains were observed with 180° domain walls less than 20 nm width, in good agreement with micromagnetic simulations.

Hysteresis enhancement on a hybrid Dy(iii) single molecule magnet/iron oxide nanoparticle system

A novel hybrid NP-Dy₁₂ system presents an enhancement of the magnetization hysteresis with respect to the isolated components while retaining the morphological characteristics of the parent NPs.

Optimising the magnetic performance of Co ferrite nanoparticles via organic ligand capping

Ferrofluids of CoFe₂O₄ nanoparticles are gaining increasing interest due to their enhanced heating performance in biomedical applications (e.g. in magnetic hyperthermia as mediators for cancer treatment) or in energy applications (e.g. magneto-thermo-electric applications). Until now, the effect of an organic surfactant on the magnetic particle behaviour has been unintentionally overlooked. Here, we present the counterintuitive magnetic effect of two representative organic ligands: diethylene glycol (DEG) and oleic acid (OA) bonded at the surface of small (∼5 nm in size) CoFe₂O₄ particles. The combined results of the bulk dc susceptibility, local-probe Mössbauer spectroscopy and physical modelling, which is based on electronic structure calculations and Monte Carlo simulations, reveal the effect of different ionic distributions of the particles due to the different surfactant layers on their magnetic behaviour. They result in an unexpected increase of the saturation magnetisation and the blocking temperature, and a decrease of the coercive field of DEG coated CoFe₂O₄ nanoparticles. Our work provides a pathway for the production of colloidal assemblies of nanocrystals for the engineering of functional nano-materials.

Understanding the Molecule-Electrode Interface for Molecular Spintronic Devices: A Computational and Experimental Study

A triple-decker SYML-Dy2 single-molecule magnet (SMM) was synthetized and grafted onto the surface of iron oxide nanoparticles (IO-NPs) coated by an oleic acid monolayer. The magnetism of the SYML-Dy2 complex, and the hybrid system, NP-Dy2, were studied by a superconducting quantum interference device (SQUID). Density functional theory (DFT) calculations were carried out to study both the energetics of the interaction between SYML-Dy2 complex to the organic capping, and the assembly presented by the oleic acid chains.

Brain Tumor Diagnostics and Therapeutics with Superparamagnetic Ferrite Nanoparticles

Ferrite nanoparticles (F-NPs) can transform both cancer diagnostics and therapeutics. Superparamagnetic F-NPs exhibit high magnetic moment and susceptibility such that in presence of a static magnetic field transverse relaxation rate of water protons for MRI contrast is augmented to locate F-NPs (i.e., diagnostics) and exposed to an alternating magnetic field local temperature is increased to induce tissue necrosis (i.e., thermotherapy). F-NPs are modified by chemical synthesis of mixed spinel ferrites as well as their size, shape, and coating. Purposely designed drug-containing nanoparticles (D-NPs) can slowly deliver drugs (i.e., chemotherapy). Convection-enhanced delivery (CED) of D-NPs with MRI guidance improves glioblastoma multiforme (GBM) treatment. MRI monitors the location of chemotherapy when D-NPs and F-NPs are coadministered with CED. However superparamagnetic field gradients produced by F-NPs complicate MRI readouts (spatial distortions) and MRS (extensive line broadening). Since extracellular pH (pH_e) is a cancer hallmark, pH_e imaging is needed to screen cancer treatments. Biosensor imaging of redundant deviation in shifts (BIRDS) extrapolates pH_e from paramagnetically shifted signals and the pH_e accuracy remains unaffected by F-NPs. Hence effect of both chemotherapy and thermotherapy can be monitored (by BIRDS), whereas location of F-NPs is revealed (by MRI). Smarter tethering of nanoparticles and agents will impact GBM theranostics.

Multifunctional Theranostic Nanoparticles Based on Exceedingly Small Magnetic Iron Oxide Nanoparticles for T1-Weighted Magnetic Resonance Imaging and Chemotherapy

The recently emerged exceedingly small magnetic iron oxide nanoparticles (ES-MIONs) (<5 nm) are promising T₁-weighted contrast agents for magnetic resonance imaging (MRI) due to their good biocompatibility compared with Gd-chelates. However, the best particle size of ES-MIONs for T₁ imaging is still unknown because the synthesis of ES-MIONs with precise size control to clarify the relationship between the r₁ (or r₂/r₁) and the particle size remains a challenge. In this study, we synthesized ES-MIONs with seven different sizes below 5 nm and found that 3.6 nm is the best particle size for ES-MIONs to be utilized as T₁-weighted MR contrast agent. To enhance tumor targetability of theranostic nanoparticles and reduce the nonspecific uptake of nanoparticles by normal healthy cells, we constructed a drug delivery system based on the 3.6 nm ES-MIONs for T₁-weighted tumor imaging and chemotherapy. The laser scanning confocal microscopy (LSCM) and flow cytometry analysis results demonstrate that our strategy of precise targeting via exposure or hiding of the targeting ligand RGD₂ on demand is feasible. The MR imaging and chemotherapy results on the cancer cells and tumor-bearing mice reinforce that our DOX@ES-MION3@RGD₂@mPEG3 nanoparticles are promising for high-resolution T₁-weighted MR imaging and precise chemotherapy of tumors.

PEGylated Anionic Magnetofluorescent Nanoassemblies: Impact of Their Interface Structure on Magnetic Resonance Imaging Contrast and Cellular Uptake

Controlling the interactions of functional nanostructures with water and biological media represents high challenges in the field of bioimaging applications. Large contrast at low doses, high colloidal stability in physiological conditions, the absence of cell cytotoxicity, and efficient cell internalization represent strong additional needs. To achieve such requirements, we report on high-payload magnetofluorescent architectures made of a shell of superparamagnetic iron oxide nanoparticles tightly anchored around fluorescent organic nanoparticles. Their external coating is simply modulated using anionic polyelectrolytes in a final step to provide efficient magnetic resonance imaging (MRI) and fluorescence imaging of live cells. Various structures of PEGylated polyelectrolytes have been synthesized and investigated, differing from their iron oxide complexing units (carboxylic vs phosphonic acid), their structure (block- or comblike), their hydrophobicity, and their fabrication process [conventional or reversible addition-fragmentation chain transfer (RAFT)-controlled radical polymerization] while keeping the central magnetofluorescent platforms the same. Combined photophysical, magnetic, NMRD, and structural investigations proved the superiority of RAFT polymer coatings containing carboxylate units and a hydrophobic tail to impart the magnetic nanoassemblies (NAs) with enhanced-MRI negative contrast, characterized by a high r₂/r₁ ratio and a transverse relaxation r₂ equal to 21 and 125 s^-1 mmol^-1 L, respectively, at 60 MHz clinical frequency (∼1.5 T). Thanks to their dual modality, cell internalization of the NAs in mesothelioma cancer cells could be evidenced by both confocal fluorescence microscopy and magnetophoresis. A 72 h follow-up showed efficient uptake after 24 h with no notable cell mortality. These studies again pointed out the distinct behavior of RAFT polyelectrolyte-coated bimodal NAs that internalize at a slower rate with no adverse cytotoxicity. Extension to multicellular tumor cell spheroids that mimic solid tumors revealed the successful internalization of the NAs in the periphery cells, which provides efficient deep-imaging labels thanks to their induced T₂* contrast, large emission Stokes shift, and bright dotlike signal, popping out of the strong spheroid autofluorescence.

Improved specific loss power on cancer cells by hyperthermia and MRI contrast of hydrophilic Fex Co1-x Fe2 O4 nanoensembles

Ferrite-based ferri/superparamagnetic nanoparticles can be rapidly heated by an external alternating magnetic field (AMF) to induce tissue necrosis of the adjacent microenvironment, but in addition provide magnetic resonance imaging (MRI) contrast utilizing enhanced water relaxivity. Here we characterized nanoensembles of Fe-Co mixed spinel ferrites (i.e. Fe_x Co_1-x Fe₂ O₄ , where x ranges from 0.2 to 0.8) synthesized by chemical co-precipitation. With nanoensembles of increasing Co content the saturation magnetization improved, while lattice parameter remained relatively constant. MRI water (transverse) relaxivity at 11.7 T was also boosted with increasing Co content. Efficiency of AMF-induced heating was quite comparable for the nanoensembles with either chitosan or polyethylene glycol (PEG) coating except for PEG-coated Fe_0.2 Co_0.8 Fe₂ O₄ , which was twice as less efficient as others. While toxicity of the nanoensembles with either coating examined on 9L tumor cell cultures showed no significant differences, upon AMF exposure (i.e. heat-induced necrosis) Fe_x Co_1-x Fe₂ O₄ composition with different values of x showed quite dramatic effects on cell death of tumor cells with both coatings. This study lays the ground work for further characterization of other mixed spinel ferrites, and in addition we expect that chitosan and PEG coated Fe_x Co_1-x Fe₂ O₄ of all the compositions will have good potential for preclinical applications in vivo. Copyright © 2016 John Wiley & Sons, Ltd.