A series connection architecture for large-area organic photovoltaic modules with a 7.5% module efficiency

Toward the Commercialization of Perovskite Solar Modules

Perovskite (PVSK) photovoltaic (PV) devices are undergoing rapid development and have reached a certified power conversion efficiency (PCE) of 26.1% at the cell level. Tremendous efforts in material and device engineering have also increased moisture, heat, and light-related stability. Moreover, the solution-process nature makes the fabrication process of perovskite photovoltaic devices feasible and compatible with some mature high-volume manufacturing techniques. All these features render perovskite solar modules (PSMs) suitable for terawatt-scale energy production with a low levelized cost of electricity (LCOE). In this review, the current status of perovskite solar cells (PSCs) and modules and their potential applications are first introduced. Then critical challenges are identified in their commercialization and propose the corresponding solutions, including developing strategies to realize high-quality films over a large area to further improve power conversion efficiency and stability to meet the commercial demands. Finally, some potential development directions and issues requiring attention in the future, mainly focusing on further dealing with toxicity and recycling of the whole device, and the attainment of highly efficient perovskite-based tandem modules, which can reduce the environmental impact and accelerate the LCOE reduction are put forwarded.

Prospects of glove-box versus air-processed organic solar cells

In the search for alternate green energy sources to offset dependence on fossil fuels, solar energy can certainly meet two needs with one deed: fulfil growing global energy demands due to its non-depletable nature and lower greenhouse gas emissions. As such, third generation thin film photovoltaic technology based organic solar cells (OSCs) can certainly play their role in providing electricity at a competing or lower cost than 1st and 2nd generation solar technologies. As OSCs are still at an early stage of research and development, much focus has been placed on improving power conversion efficiencies (PCEs) inside a controlled environment i.e. a glove-box (GB) filled with an inert gas such as N₂. This was necessary until now, to control and study the local nanomorphology of the spin-coated blend films. For OSCs to compete with other solar energy technologies, OSCs should produce similar or even better morphologies in an open environment i.e. air, such that air-processed OSCs can result in similar PCEs in comparison to their GB-processed counterparts. In this review, we have compared GB- vs. air-processed OSCs from morphological and device physics aspects and underline the key features of efficient OSCs, processed in either GB or air.

Impact of solvents on doctor blade coatings and bathocuproine cathode interlayer for large-area organic solar cell modules

Efforts to commercialize organic solar cells (OSCs) by developing roll-to-roll compatible modules have encountered challenges in optimizing printing processes to attain laboratory-level performance in fully printable OSC architectures. In this study, we present efficient OSC modules fabricated solely through printing methods. We systematically evaluated the impact of processing solvents on the morphology of crucial layers, such as the hole transport, photoactive, and electron transport layers, applied using the doctor blade coating method, with a particular focus on processability. Notably, deposition of charge transport layer using printing techniques is still a challenging task, mainly due to the hydrophobic characteristic of the organic photoactive layer. To overcome this issue, we investigated the solvent effect of a well-studied cathode interlayer, bathocuproine (BCP). We were able to form a uniform thin BCP film (∼10 nm) on a non-fullerene based organic photoactive layer using the doctor bladed coating method. Our results showed that the use of volatile alcohols in the BCP processing required a delicate balance between wettability and vaporization, which contrasted with the results for spin-coated films. These findings provide important insights into improving the efficiency of printing techniques for depositing charge transport layers. The fully printed OSC modules, featuring uniform and continuous BCP layer formation, achieved an impressive power conversion efficiency of 10.8% with a total area of 10.0 cm2 and a geometrical fill factor of 86.5%.

A Flexible, High-Voltage (>100 V) Generating Device Based on Zebra-Like Asymmetrical Photovoltaic Cascade

The mutual conversion between light and electricity lies at the heart of optoelectronic and photonic applications. Maximization of the photoelectric conversion is a long-term goal that can be pursued via the fabrication of devices with ad-hoc architectures. In this framework, it is of utter importance to harvest and transform light irradiation into high electric potential in specific area for driving functional dielectrics that respond to pure electric field. Here, a nano-fabrication technology has been devised featuring double self-alignment that is applied to construct zebra-like asymmetric heterojunction arrays. Such nanostructured composite, which covers a surface area of 5 × 4 mm² and contains 500 periodic repeating units, is capable of photo generating voltages as high as 140 V on a flexible substrate. This approach represents a leap over the traditional functionalization process based on simply embedding materials into devices by demonstrating the disruptive potential of integrating oriented nanoscale device components into meta-material.

Reproducibility in Time and Space-The Molecular Weight Effects of Polymeric Materials in Organic Photovoltaic Devices

The reproducibility issue is one of the major challenges for the commercialization of large-area organic electronic devices. It involves both the device-to-device variation and opto-electronic properties in different positions of a single thin film. Herein, the molecular weight effects in polymeric semiconductors with three widely used photovoltaic donor materials P3HT, PBDB-T, and PM6 are systematically investigated. A simple but effective method is proposed to evaluate the uniformity of large-area devices by adopting the micron-level grid electrodes in organic thin films. An interesting phenomenon is observed that the device is gradually improved uniformly with the M_w range lower than 100 kg mol^-1 . In neat films, both the mobility and energetic disorder values of hole carriers exhibit relatively lower coefficient of variation (c_v ) in high molecular-weight systems. After blending with the electron-accepting materials, their bulk heterojunction films also enjoy more uniform hole transfer rates, fluorescence lifetimes, and power conversion efficiencies in single and different devices. This work not only proposes a facile approach to evaluate the electrical properties of large-area organic thin films, but also demonstrates the relationship between molecular weight and device reproducibility in polymer solar cells. This contribution provides a new insight into the commercial large-scale production of organic electronics.

Printing fabrication of large-area non-fullerene organic solar cells

Organic solar cells (OSCs) based on a bulk heterojunction structure exhibit inherent advantages, such as low cost, light weight, mechanical flexibility, and easy processing, and they are emerging as a potential renewable energy technology. However, most studies are focused on lab-scale, small-area (<1 cm²) devices. Large-area (>1 cm²) OSCs still exhibit considerable efficiency loss during upscaling from small-area to large-area, which is a big challenge. In recent years, along with the rapid development of high-performance non-fullerene acceptors, many researchers have focused on developing large-area non-fullerene-based devices and modules. There are three essential issues in upscaling OSCs from small-area to large-area: fabrication technology, equipment development, and device component processing strategy. In this review, the challenges and solutions in fabricating high-performance large-area OSCs are discussed in terms of the abovementioned three aspects. In addition, the recent progress of large-area OSCs based on non-fullerene electron acceptors is summarized.

Naphthalocyanine-Based NIR Organic Photodiode: Understanding the Role of Different Types of Fullerenes

In this work, we presented experimental observation on solution-processed bulk heterojunction organic photodiode using vanadyl 2,11,20,29-tetra tert-butyl 2,3 naphthalocyanine (VTTBNc) as a p-type material. VTTBNc is blended with two different acceptors, which are PC₆₁BM and PC₇₁BM, to offer further understanding in evaluating the performance in organic photodiode (OPD). The blend film of VTTBNc:PC₇₁BM with a volumetric ratio of 1:1 exhibits optimized performance in the VTTBNc blend structure with 2.31 × 10⁹ Jones detectivity and 26.11 mA/W responsivity at a −1 V bias. The response and recovery time of VTTBNc:PC₇₁BM were recorded as 241 ms and 310 ms, respectively. The light absorption measurement demonstrated that VTTBNc could extend the light absorption to the near-infrared (NIR) region. The detail of the enhancement of the performance by adding VTTBNc to the blend was further explained in the discussion section.

Fabrication of High VOC Organic Solar Cells with a Non-Halogenated Solvent and the Effect of Substituted Groups for "Same-A-Strategy" Material Combinations

We report a class of high-voltage organic solar cells (OSCs) processed by the environmentally friendly solvent tetrahydrofuran (THF), where four benzotriazole (BTA)-based p-type polymers (PE31, PE32, PE33, and J52-Cl) and a BTA-based small molecule BTA5 are applied as p-type and n-type materials, respectively, according to "Same-A-Strategy" (SAS). The single-junction OSCs based on all four material blends exhibit a high open-circuit voltage (V_OC) above 1.10 V. We systematically study the impact of the three different substituents (-OCH₃, -F, -Cl) on the BTA unit of the polymer donors. Interestingly, PE31 containing the unsubstituted BTA unit shows the efficient hole transfer and more balanced charge mobilities, thus leading to the highest power conversion efficiency (PCE) of 10.08% with a V_OC of 1.11 V and a J_SC of 13.68 mA cm^-2. Due to the upshifted highest electron-occupied molecular orbital (HOMO) level and the weak crystallinity of the methoxy-substituted polymer PE32, the resulting device shows the lowest PCE of 7.40% with a slightly decreased V_OC of 1.10 V. In addition, after the chlorination and fluorination, the HOMO levels of the donor materials PE33 and J52-Cl are gradually downshifted, contributing to increased V_OC values of 1.16 and 1.21 V, respectively. Our results prove that an unsubstituted p-type polymer can also afford high voltage and promising performance via non-halogenated solvent processing, which is of great significance for simplifying the synthesis steps and realizing the commercialization of OSCs.

Progress in Materials, Solution Processes, and Long-Term Stability for Large-Area Organic Photovoltaics

Organic solar cells based on bulk heterojunctions (BHJs) are attractive energy-conversion devices that can generate electricity from absorbed sunlight by dissociating excitons and collecting charge carriers. Recent breakthroughs attained by development of nonfullerene acceptors result in significant enhancement in power conversion efficiency (PCEs) exceeding 17%. However, most of researches have focused on pursuing high efficiency of small-area (<1 cm² ) unit cells fabricated usually with spin coating. For practical application of organic photovoltaics (OPVs) from lab-scale unit cells to industrial products, it is essential to develop efficient technologies that can extend active area of devices with minimized loss of performance and ensured operational stability. In this progress report, an overview of recent advancements in materials and processing technologies is provided for transitioning from small-area laboratory-scale devices to large-area industrial scale modules. First, development of materials that satisfy requirements of high tolerability in active layer thickness and large-area adaptability is introduced. Second, morphology control using various coating techniques in a large active area is discussed. Third, the recent research progress is also underlined for understanding mechanisms of OPV degradation and studies for improving device long-term stability along with reliable evaluation procedures.

Large-Area Nonfullerene Organic Solar Cell Modules Fabricated by a Temperature-Independent Printing Method

Despite recent breakthroughs in the fabrication of spin-coated small-area devices (≤0.1 cm²) with power conversion efficiencies (PCEs) of more than 17%, printed large-area organic solar cells (OSCs) are significantly less efficient because of the intrinsic differences between the coating dynamics of the two types of OSCs. The PCEs of printed large-area (∼100 cm²) OSCs have typically been decreased compared with those of small-area spin-coated devices. In this work, an efficient low-temperature printing method to fabricate high-efficiency large-area nonfullerene-based OSC modules is successfully demonstrated. A systematic study of the relationship between the concentration of the photoactive solution and the resulting film properties reveals that the large-area modules (85 cm²) produced in this work deliver excellent performance, yielding PCEs of up to 8.18% with a geometric fill factor of 85%. These novel OSC modules are ∼87% as efficient as small-area printed single cells (cell PCE ∼9.43% with 1 cm²).

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

Flexible organic photovoltaics (OPVs) are promising power sources for wearable electronics. However, it is challenging to simultaneously achieve high efficiency as well as good stability under various stresses. Herein, we demonstrate the fabrication of highly efficient (efficiency, 13.2%) and stable OPVs based on nonfullerene blends by a single-step postannealing treatment. The device performance decreases dramatically after annealing at 90 °C and is fully recovered after annealing at 150 °C. Glass-encapsulated annealed OPVs show good environmental stability with 4.8% loss in efficiency after 4,736 h and an estimated T 80 lifetime (80% of the initial power conversion efficiency) of over 20,750 h in the dark under ambient condition and T 80 lifetime of 1,050 h at 85 °C and 30% relative humidity. This environmental stability is enabled by the synergetic effect of the stable morphology of donor/acceptor blends and thermally stabilized interfaces due to doping. Furthermore, the high efficiency and good stability are almost 100% retained in ultraflexible OPVs and minimodules which are mechanically robust and have long-term operation capability and thus are promising for future self-powered and wearable electronics.

Synthesis of ITIC Derivatives with Extended π-Conjugation as Non-Fullerene Acceptors for Organic Solar Cells

The realization of printed organic solar cells (OSCs) as a commercial technology is dependent on the development of high-performance photovoltaic materials suitable for large-scale device manufacture. In this study, the design, synthesis, and characterization of a series of A-D-A'-D-A-type molecular acceptors based on indacenodithienothiophene (IDTT) and thiophene-flanked 2,1,3-benzothiadiazole (DTBT) are reported. The synthesized molecular acceptors showed broader absorption ranges and narrower band gap energies than those of well-known 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno [2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC)-based molecular acceptors. Furthermore, the synthesized acceptors could tune the frontier molecular orbital energy levels, dipole moments, and their crystallinities by introducing fluorine (F) atoms and cyano (CN) groups on DTBT as a core A' unit. The cyano-substituted DTBT-based molecular acceptor (CNDTBT-IDTT-FINCN) showed a strong molar absorptivity and dipole moment, high hole/electron charge mobilities, and a favorable face-on orientation using films blended with poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione)] (PBDB-T). An inverted organic photovoltaic (OPV) device using CNDTBT-IDTT-FINCN exhibits a power conversion efficiency (PCE) of 9.13% when using PBDB-T as a donor material in small cells (0.12 cm²). Sub-module devices with an active area of 55.45 cm² are fabricated using bar-coating and exhibit PCEs of up to 7.50%. This demonstration of a high-efficiency large-area device makes CNDTBT-IDTT-FINCN a suitable and promising candidate for printed OPV devices.

Existence of Ligands within Sol-Gel-Derived ZnO Films and Their Effect on Perovskite Solar Cells

The sol-gel (SG) method has been well-documented as one useful way to produce ZnO films as an excellent electron transport material (ETM) for efficient perovskite solar cells (PSCs). Generally, the precursor films containing zinc acetate dihydrate and a stabilizing ligand monoethanolamine (EA) were annealed to obtain ZnO films. A noteworthy issue is the commonly reported annealing temperature (T_a) in a wide range of 150-600 °C. In this work, we investigated the effect of the annealing temperature on the film composition and first confirmed the co-existence of acetate and EA species when T_a is below 380 °C. EA still survived within the ZnO films when T_a was between 380 and 450 °C. When T_a was over 450 °C, pure ZnO films can be obtained. The presence of ligands also remarkably altered the work function of the corresponding ZnO samples, thereby resulting in the remarkably different effects on the efficiency and stability of PSCs with the ZnO samples as ETMs. This work affords a clearer understanding of ZnO films prepared by the SG method at molecular insights, promoting their application in photoelectric fields.

Large-Area Organic Solar Cells: Material Requirements, Modular Designs, and Printing Methods

The printing of large-area organic solar cells (OSCs) has become a frontier for organic electronics and is also regarded as a critical step in their industrial applications. With the rapid progress in the field of OSCs, the highest power conversion efficiency (PCE) for small-area devices is approaching 15%, whereas the PCE for large-area devices has also surpassed 10% in a single cell with an area of ≈1 cm² . Here, the progress of this fast developing area is reviewed, mainly focusing on: 1) material requirements (materials that are able to form efficient thick active layer films for large-area printing); 2) modular designs (effective designs that can suppress electrical, geometric, optical, and additional losses, leading to a reduction in the PCE of the devices, as a consequence of substrate area expansion); and 3) printing methods (various scalable fabrication techniques that are employed for large-area fabrication, including knife coating, slot-die coating, screen printing, inkjet printing, gravure printing, flexographic printing, pad printing, and brush coating). By combining thick-film material systems with efficient modular designs exhibiting low-efficiency losses and employing the right printing methods, the fabrication of large-area OSCs will be successfully realized in the near future.

A General Approach for Lab-to-Manufacturing Translation on Flexible Organic Solar Cells

The blossoming of organic solar cells (OSCs) has triggered enormous commercial applications, due to their high-efficiency, light weight, and flexibility. However, the lab-to-manufacturing translation of the praisable performance from lab-scale devices to industrial-scale modules is still the Achilles' heel of OSCs. In fact, it is urgent to explore the mechanism of morphological evolution in the bulk heterojunction (BHJ) with different coating/printing methods. Here, a general approach to upscale flexible organic photovoltaics to module scale without obvious efficiency loss is demonstrated. The shear impulse during the coating/printing process is first applied to control the morphology evolution of the BHJ layer for both fullerene and nonfullerene acceptor systems. A quantitative transformation factor of shear impulse between slot-die printing and spin-coating is detected. Compelling results of morphological evolution, molecular stacking, and coarse-grained molecular simulation verify the validity of the impulse translation. Accordingly, the efficiency of flexible devices via slot-die printing achieves 9.10% for PTB7-Th:PC₇₁ BM and 9.77% for PBDB-T:ITIC based on 1.04 cm² . Furthermore, 15 cm² flexible modules with effective efficiency up to 7.58% (PTB7-Th:PC₇₁ BM) and 8.90% (PBDB-T:ITIC) are demonstrated with satisfying mechanical flexibility and operating stability. More importantly, this work outlines the shear impulse translation for organic printing electronics.

Highly Efficient Flexible Polymer Solar Cells with Robust Mechanical Stability

Landmark power conversion efficiency (PCE) over 14% has been accomplished for single-junction polymer solar cells (PSCs). However, the inevitable fracture of inorganic transporting layers and deficient interlayer adhesion are critical challenges to achieving the goal of flexible PSCs. Here, a bendable and thickness-insensitive Al-doped ZnO (AZO) modified by polydopamine (PDA) has emerged as a promising electron transporting layer (ETL) in PSCs. It has special ductility and adhesion to the active layer for improving the mechanical durability of the device. Nonfullerenes PSCs based on PBDB-T-2F:IT-4F with AZO:1.5% PDA (80 nm) ETL yield the best PCE of 12.7%. More importantly, a prominent PCE, approaching 11.5%, is reached for the fully flexible device based on Ag-mesh flexible electrode, and the device retains >91% of its initial PCE after bending for 1500 cycles. Such thickness insensitivity, mechanical durability, and interfacial adhesion properties for the inorganic ETLs are desired for the development of flexible and wearable PSCs with reliable photovoltaic performance and large-area roll-to-roll printing manufacture.

Enhanced performance of PTB7-Th:PCBM based active layers in ternary organic solar cells

The present study aims at understanding the role of incorporating Cu₂S nanocrystals (NCs) as a third component in ternary organic solar cells.

Interlayers Self-Generated by Additive-Metal Interactions in Organic Electronic Devices

The fundamental structure of all organic electronic devices is a stack of thin layers sandwiched between electrodes, with precise intralayer morphology and interlayer interactions. Solution processing multilayers with little to no intermixing is, however, technically challenging and often incompatible with continuous roll-to-roll, high-speed manufacturing. Here, an overview of a recently developed methodology for self-generation of interlayers positioned between the active layer and metal contact is presented. The interlayer material is blended as an additive in the active layer and migrates to the organic/metal interface during metal deposition. The driving force for this migration is additive-metal interactions. The generated interlayer positions an interfacial dipole that reduces barriers for charge transfer across the organic/metal interface. This methodology is generic and, as reported here, the self-generated interlayers significantly improve the performance of many devices. Importantly, this approach is compatible with printing and reel-to-reel processing. Directives toward additive selection, processing conditions and integration in future applications are also discussed.

High-efficiency large-area perovskite photovoltaic modules achieved via electrochemically assembled metal-filamentary nanoelectrodes

Realizing industrial-scale, large-area photovoltaic modules without any considerable performance losses compared with the performance of laboratory-scale, small-area perovskite solar cells (PSCs) has been a challenge for practical applications of PSCs. Highly sophisticated patterning processes for achieving series connections, typically fabricated using printing or laser-scribing techniques, cause unexpected efficiency drops and require complicated manufacturing processes. We successfully fabricated high-efficiency, large-area PSC modules using a new electrochemical patterning process. The intrinsic ion-conducting features of perovskites enabled us to create metal-filamentary nanoelectrodes to facilitate the monolithic serial interconnections of PSC modules. By fabricating planar-type PSC modules through low-temperature annealing and all-solution processing, we demonstrated a notably high module efficiency of 14.0% for a total area of 9.06 cm2 with a high geometric fill factor of 94.1%.

Roll-to-Roll Slot-Die-Printed Polymer Solar Cells by Self-Assembly

Extremely simplified one-step roll-to-roll slot-die-printed flexible indium tin oxide (ITO)-free polymer solar cells (PSCs) are demonstrated based on the ternary blends of electron-donor polymer thieno[3,4- b]thiophene/benzodithiophene, electron-acceptor fullerene [6,6]-phenyl-C₇₁-butyric acid methyl ester, and electron-extracting polymer poly[(9,9-bis(3'-( N, N-dimethylamino)propyl)-2,7-fluorene)- alt-2,7-(9,9-dioctylfluorene)] (PFN) at room temperature (RT) in ambient air. The flexible ITO-free PSC exhibits a comparable power conversion efficiency (PCE) with the device employing complicated two-step slot-die printing (5.29% vs 5.41%), which indicates that PFN molecules can migrate from the ternary nanocomposite toward the Ag cathode via vertical self-assembly during the one-step slot-die printing process in air. To confirm the migration of PFN, the morphology and elemental analysis as well as charge transport of different active layers are investigated by the in situ transient film drying process, transmission electron microscopy, atomic force microscopy, contact angle and surface energy, X-ray photoelectron spectroscopy, scanning electron microscopy, impedance spectroscopy, transient photovoltage and transient photocurrent, and laser-beam-induced current. Moreover, the good air and mechanical stability of the flexible device with a decent PCE achieved in 1 cm² PSCs at RT in air suggests the feasibility of energy-saving and time-saving one-step slot-die printing to large-scale roll-to-roll manufacture in the future.

Interplay of Interfacial Layers and Blend Composition To Reduce Thermal Degradation of Polymer Solar Cells at High Temperature

The thermal stability of printed polymer solar cells at elevated temperatures needs to be improved to achieve high-throughput fabrication including annealing steps as well as long-term stability. During device processing, thermal annealing impacts both the organic photoactive layer, and the two interfacial layers make detailed studies of degradation mechanism delicate. A recently identified thermally stable poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]]:[6,6]-phenyl-C₇₁-butyric acid methyl ester (PTB7:PC₇₀BM) blend as photoactive layer in combination with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate as hole extraction layer is used here to focus on the impact of electron extraction layer (EEL) on the thermal stability of solar cells. Solar cells processed with densely packed ZnO nanoparticle layers still show 92% of the initial efficiency after constant annealing during 1 day at 140 °C, whereas partially covering ZnO layers as well as an evaporated calcium layer leads to performance losses of up to 30%. This demonstrates that the nature and morphology of EELs highly influence the thermal stability of the device. We extend our study to thermally unstable PTB7:[6,6]-phenyl-C₆₁-butyric acid methyl ester (PC₆₀BM) blends to highlight the impact of ZnO on the device degradation during annealing. Importantly, only 12% loss in photocurrent density is observed after annealing at 140 °C during 1 day when using closely packed ZnO. This is in stark contrast to literature and addressed here to the use of a stable double-sided confinement during thermal annealing. The underlying mechanism of the inhibition of photocurrent losses is revealed by electron microscopy imaging and spatially resolved spectroscopy. We found that the double-sided confinement suppresses extensive fullerene diffusion during the annealing step, but with still an increase in size and distance of the enriched donor and acceptor domains inside the photoactive layer by an average factor of 5. The later result in combination with comparably small photocurrent density losses indicates the existence of an efficient transport of minority charge carriers inside the donor and acceptor enriched phases in PTB7:PC₆₀BM blends.

Organic Optoelectronic Materials: Mechanisms and Applications

Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjugated polymers are considered, and their applications in organic solar cells, photodetectors, and photorefractive devices are discussed.

Bulk-Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization

The past two decades of vigorous interdisciplinary approaches has seen tremendous breakthroughs in both scientific and technological developments of bulk-heterojunction organic solar cells (OSCs) based on nanocomposites of π-conjugated organic semiconductors. Because of their unique functionalities, the OSC field is expected to enable innovative photovoltaic applications that can be difficult to achieve using traditional inorganic solar cells: OSCs are printable, portable, wearable, disposable, biocompatible, and attachable to curved surfaces. The ultimate objective of this field is to develop cost-effective, stable, and high-performance photovoltaic modules fabricated on large-area flexible plastic substrates via high-volume/throughput roll-to-roll printing processing and thus achieve the practical implementation of OSCs. Recently, intensive research efforts into the development of organic materials, processing techniques, interface engineering, and device architectures have led to a remarkable improvement in power conversion efficiencies, exceeding 11%, which has finally brought OSCs close to commercialization. Current research interests are expanding from academic to industrial viewpoints to improve device stability and compatibility with large-scale printing processes, which must be addressed to realize viable applications. Here, both academic and industrial issues are reviewed by highlighting historically monumental research results and recent state-of-the-art progress in OSCs. Moreover, perspectives on five core technologies that affect the realization of the practical use of OSCs are presented, including device efficiency, device stability, flexible and transparent electrodes, module designs, and printing techniques.

Enhancement of charge transport properties of small molecule semiconductors by controlling fluorine substitution and effects on photovoltaic properties of organic solar cells and perovskite solar cells

We prepared a series of small molecules based on 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole) with different fluorine substitution patterns (0F-4F). Depending on symmetricity and numbers of fluorine atoms incorporated in the benzo[c][1,2,5]thiadiazole unit, they show very different optical and morphological properties in a film. 2F and 4F, which featured symmetric and even-numbered fluorine substitution patterns, display improved molecular packing structures and higher crystalline properties in a film compared with 1F and 3F and thus, 2F achieved the highest OTFT mobility, which is followed by 4F. In the bulk heterojunction solar cell fabricated with PC₇₁BM, 2F achieves the highest photovoltaic performance with an 8.14% efficiency and 0F shows the lowest efficiency of 1.28%. Moreover, the planar-type perovskite solar cell (PSC) prepared with 2F as a dopant-free hole transport material shows a high power conversion efficiency of 14.5% due to its high charge transporting properties, which were significantly improved compared with the corresponding PSC device obtained from 0F (8.5%). From the studies, it is demonstrated that low variation in the local dipole moment and the narrow distribution of 2F conformers make intermolecular interactions favorable, which may effectively drive crystal formations in the solid state and thus, higher charge transport properties compared with 1F and 3F.