Carbon nanotube membranes with ultrahigh specific adsorption capacity for water desalination and purification

Versatile Keratin Fibrous Adsorbents with Rapid-Response Shape-Memory Features for Sustainable Water Remediation

Biodegradable shape-memory polymers derived from protein substrates are attractive alternatives with strong potential for valorization, although their reconstruction remains a challenge due to the poor processability and inherent instability. Herein, based on Maillard reaction and immobilization, a feather keratin fibrous adsorbent featuring dual-response shape-memory is fabricated by co-spinning with pullulan, heating, and air-assisted spraying ZIF-8-NH2. Maillard reaction between the amino group of keratin and the carbonyl group of pullulan improves the mechanics and thermal performance of the adsorbent. ZIF-8-NH2 immobilization endows the adsorbent with outstanding multipollutant removal efficiency (over 90%), water stability, and photocatalytic degradation and sterilization performance. Furthermore, the adsorbent can be folded to 1/12 of its original size to save space for transportation and allow for rapid on-demand unfolding (12 s) upon exposure to water and ultraviolet irradiation to facilitate the adsorption and photocatalytic activity with a larger water contact area. This research provides new insight for further applications of keratin-based materials with rapid shape-memory features.

Bridging Microscopic Dynamics and Hydraulic Permeability in Mechanically-Deformed Nanoporous Materials

In the field of nanoconfined fluids, there are striking examples of deformation/transport coupling in which mechanical solicitation of the confining solid and dynamics of the confined fluid impact each other. While this intriguing behavior can be harnessed for applications (e.g., energy storage, phase separation, catalysis), the underlying mechanisms remain to be understood. Here, using molecular simulations, we investigate fluid flow in deformable nanoporous materials subjected to external mechanical stresses. We show that the pore mechanical properties significantly affect fluid flow as they lead to significant pore deformations and different fluid organization at the solid surface. Despite such mechanical effects, we show that the fluid thermodynamic properties (i.e., adsorption) can be linked consistently to Darcy's law for the permeability by invoking a pore size definition based on the concept of Gibbs' dividing surface. In particular, regardless of the solid stiffness and applied external stress, all data can be rationalized by accounting for the fluid viscosity and slippage at the solid surface (independently of a specific pore size definition). Using such a formalism, we establish that the intimate relation─derived using the linear response theory─between collective diffusivity and hydraulic permeability remains valid. This allows linking consistently microscopic dynamics experiments and macroscopic permeability experiments on fluid flow in deformable nanoporous materials.

Ion-Ion Selectivity of Synthetic Membranes with Confined Nanostructures

Synthetic membranes featuring confined nanostructures have emerged as a prominent category of leading materials that can selectively separate target ions from complex water matrices. Further advancements in these membranes will pressingly rely on the ability to elucidate the inherent connection between transmembrane ion permeation behaviors and the ion-selective nanostructures. In this review, we first abstract state-of-the-art nanostructures with a diversity of spatial confinements in current synthetic membranes. Next, the underlying mechanisms that govern ion permeation under the spatial nanoconfinement are analyzed. We then proceed to assess ion-selective membrane materials with a focus on their structural merits that allow ultrahigh selectivity for a wide range of monovalent and divalent ions. We also highlight recent advancements in experimental methodologies for measuring ionic permeability, hydration numbers, and energy barriers to transport. We conclude by putting forth the future research prospects and challenges in the realm of high-performance ion-selective membranes.

Achieving Exceptional Volumetric Desalination Capacity Using Compact MoS2 Nanolaminates

Capacitive deionization (CDI) has emerged as a promising technology for freshwater recovery from low-salinity brackish water. It is still inapplicable in specific scenarios (e.g., households, islands, or offshore platforms) due to too low volumetric adsorption capacities. In this study, a high-density semi-metallic molybdenum disulfide (1T'-MoS2) electrode with compact architecture obtained by restacking of exfoliated nanosheets, which achieve high capacitance up to ≈277.5 F cm-3 under an ultrahigh scan rate of 1000 mV s-1 with a lower charge-transfer resistance and nearly tenfold higher electrochemical active surface area than the 2H-MoS2 electrode, is reported. Furthermore, 1T'-MoS2 electrode demonstrates exceptional volumetric desalination capacity of 65.1 mgNaCl cm-3 in CDI experiments. Ex situ X-ray diffraction (XRD) reveal that the cation storage mechanism with the dynamic expansion of 1T'-MoS2 interlayer to accommodate cations such as Na+, K+, Ca2+, and Mg2+, which in turn enhances the capacity. Theoretical analysis unveils that 1T' phase is thermodynamically preferable over 2H phase, the ion hydration and channel confinement also play critical role in enhancing ion adsorption. Overall, this work provides a new method to design compact 2D-layered nanolaminates with high-volumetric performance for CDI desalination.

Amidoxime-grafted cotton fibers with anti-microbial sludge for efficient uranium recovery

Uranium as a nuclear fuel, its source and aftertreatment has been a hot topic of debate for developers. In this paper, amidoxime and guanidino-modified cotton fibers (DC-AO-PHMG) were synthesized by the two-step functionalization approach, which exhibited remarkable antimicrobial and high uranium recovery property. Adsorption tests revealed that DC-AO-PHMG had excellent selectivity and anti-interference properties, the maximum adsorption capacity of 609.75 mg/g. More than 85 % adsorption capacity could still be kept after 10 adsorption-desorption cycles, and it conformed to the pseudo-second-order kinetic model and the Langmuir adsorption isotherm model as a spontaneous heat-absorbing chemical monolayer process. FT-IR, EDS and XPS analyses speculated that the amidoxime and amino synergistically increased the uranium uptake. The inhibitory activities of DC-AO-PHMG against three aquatic bacteria, BEY, BEL (from Yellow River water and lake bottom silt, respectively) and B. subtilis were significantly stronger, and the uranium adsorption was not impacted by the high bacteria content. Most importantly, DC-AO-PHMG removed up to 94 % of uranium in simulated seawater and extracted up to 4.65 mg/g of uranium from Salt Lake water, which demonstrated its great potential in the field of uranium resource recovery.

Diagnostic, Therapeutic, and Theranostic Multifunctional Microneedles

Microneedles (MNs) have maintained their popularity in therapeutic and diagnostic medical applications throughout the past decade. MNs are originally designed to gently puncture the stratum corneum layer of the skin and have lately evolved into intelligent devices with functions including bodily fluid extraction, biosensing, and drug administration. MNs offer limited invasiveness, ease of application, and minimal discomfort. Initially manufactured solely from metals, MNs are now available in polymer-based varieties. MNs can be used to create systems that deliver drugs and chemicals uniformly, collect bodily fluids, and are stimulus-sensitive. Although these advancements are favorable in terms of biocompatibility and production costs, they are insufficient for the therapeutic use of MNs. This is the first comprehensive review that discusses individual MN functions toward the evolution and development of smart and multifunctional MNs for a variety of novel and impactful future applications. The study examines fabrication techniques, application purposes, and experimental details of MN constructs that perform multiple functions concurrently, including sensing, drug-molecule release, sampling, and remote communication capabilities. It is highly likely that in the near future, MN-based smart devices will be a useful and important component of standard medical practice for different applications.

Spontaneous thermal energy transfer and anti-gravitational water pumping using Al2O3 fiber-enhanced flexible nonwoven material as a high-performance and self-floating solar evaporator

Solar-driven evaporation is promising to address water scarcity. However, preserving the heat inside evaporators instead of allowing run-off, and synergistically utilizing it to wick water from the bulk, is still underexplored. Herein, a dual-functional bridge of longitudinal orientated channels of Al2O3 fibers (AOFs) embedded in a multi-layered nonwoven evaporator was proposed to create a buffer for spontaneous thermal conduction and anti-gravitational water pumping. As a self-floating system with high porosity and flexibility, benefiting from the strong water transporting ability and high thermal conductivity of the AOFs, a superhigh evaporation rate (2.79 kg m-2 h-1 under 1 sun) can be achieved with great stability and durability. This work highlights the potential of promoting thermal management using a large-scale vapour chamber and mass-producible nonwoven technology to prepare a high-performance evaporator for practical applications.

Biomimetic ZrO2-modified seaweed residue with excellent fluorine/ bacteria removal and uranium extraction properties for wastewater purification

Exploring and developing promising biomass composite membranes for the water purification and waste resource utilization is of great significance. The modification of biomass has always been a focus of research in its resource utilization. In this study, we successfully prepare a functional composite membrane, activated graphene oxide/seaweed residue-zirconium dioxide (GOSRZ), with fluoride removal, uranium extraction, and antibacterial activity by biomimetic mineralization of zirconium dioxide nanoparticles (ZrO2 NPs) on seaweed residue (SR) grafted with oxidized graphene (GO). The GOSRZ membrane exhibits highly efficient and specific adsorption of fluoride. For the fluoride concentrations in the range of 100-400 mg/L in water, the removal efficiency can reach over 99 %, even in the presence of interfering ions. Satisfactory extraction rates are also achieved for uranium by the GOSRZ membrane. Additionally, the antibacterial performance studies show that this composite membrane efficiently removes Escherichia coli (E. coli) and Methicillin-resistant Staphylococcus aureus (MRSA). The high adsorption of F- and U(VI) to the composite membrane is ascribed to the ionic exchange and coordination interactions, and its antibacterial activity is caused by the destruction of bacterial cell structure. The sustainability of the biomass composite membranes is further evaluated using the Sustainability Footprint method. This study provides a simple preparation method of biomass composite membrane, expands the water purification treatment technology, and offers valuable guidance for the resource utilization of seaweed waste and the removal of pollutants in wastewater.

Nanoscale electrohydrodynamic ion transport: Influences of channel geometry and polarization-induced surface charges

Electrohydrodynamic ion transport has been studied in nanotubes, nanoslits, and nanopores to mimic the advanced functionalities of biological ion channels. However, probing how the intricate interplay between the electrical and mechanical interactions affects ion conduction in asymmetric nanoconduits presents further obstacles. Here, ion transport across a conical nanopore embedded in a polarizable membrane under an electric field and pressure is analyzed by numerically solving a continuum model based on the Poisson, Nernst-Planck, and Navier-Stokes equations. We report an anomalous ionic current depletion, of up to 75%, and an unexpected rise in current rectification when pressure is exerted along the external electric field. Membrane polarization is revealed as the prerequisite to obtain this previously undetected electrohydrodynamic coupling. The electric field induces large surface charges at the pore tip due to its conical shape, creating nonuniform electrical double layers (EDL) with a massive accumulation of electrolyte ions near the orifice. Once applied, the pressure distorts the quasiequilibrium distribution of the EDL ions to influence the nanopore conductivity. Our fundamental approach to inspect the effect of pressure on the channel EDL (and thus ionic conductance) in contrast to its effect on the current arising from the hydrodynamic streaming of ions further explains the pressure-sensitive ion transport in different nanochannels and physical regimes manifested in past experiments, including the hitherto inexplicit mechanism behind the mechanically activated ion transport in carbon nanotubes. This enhances our broad understanding of nanoscale electrohydrodynamic ion transport, yielding a platform to build nanofluidic devices and ionic circuits with more robust and tunable responses to electrical and mechanical stimuli.

Uniqueness of Nanoscale Confinement for Fast Water Transport: Effect of Nanotube Diameter and Hydrophobicity

Inspired by the enhanced water permeability of carbon nanotubes (CNTs), molecular dynamics simulations were performed to investigate the transport behavior through nanotubes made of boron nitride (BNNT), silicon carbide (SiC), and silicon nitride (SiN) alongside carbon nanotubes (which have different hydrophobic attributes) considering their implication for reverse osmosis (RO) membranes under different practical environments. According to our findings, not only do CNTs but also other kinds of nanotubes exhibit transition anomalies with increasing diameter. Utilizing the robust two-phase thermodynamic (2PT) methods, the current examinations shed light on thermodynamic origin of favorable water filling of these nanotubes. The results show that regardless of the nanotube material, the filling of water inside small nanopores (d < 10 Å) as well as within pores of diameter larger than 15 Å will always be favored by the entropy of filling. However, the entropic preference for filling nanotubes with a diameter of 10-15 Å depends on the constituent material. In particular, the enhancement in total entropy of confined water was mainly due to the increased rotational freedom of confined water molecules. The thermodynamic origin of water transport was correlated with the structural and fluidic behavior of water inside these nanotubes. The observed data for density, flow, structure correlation functions, water-water coordination, tetrahedral order parameter, hydrogen bonds, and density of states functions quantitatively support the observed entropy behavior. Of critical importance is that the present study demonstrates the effectiveness of RO filtration using nanotubes of boron nitride rather than carbon. Furthermore, it was found that one should avoid the use of silicon nanotubes unless filtration needs to be performed under harsh environments where nanotube of other materials cannot survive. Specifically, the results show that both the structural and dynamic properties of water confined in BNNTs are similar to those of CNT's, and for SiNT it is similar as SiC. Our results show that besides the nanotube material, the chirality index of the nanotube also plays a significant role in determining the structure, dynamics and thermodynamics of confined water molecules.

Ion and Hydrodynamic Translucency in 1D van der Waals Heterostructured Boron-Nitride Single-Walled Carbon Nanotubes

An unresolved challenge in nanofluidics is tuning ion selectivity and hydrodynamic transport in pores, particularly for those with diameters larger than a nanometer. In contrast to conventional strategies that focus on changing surface functionalization or confinement degree by varying the radial dimension of the pores, we explore a unique approach for manipulating ion selectivity and hydrodynamic flow enhancement by externally coating single-walled carbon nanotubes (SWCNTs) with a few layers of hexagonal boron nitride (h-BN). For van der Waals heterostructured BN-SWCNTs, we observed a 9-fold increase in cation selectivity for K+ versus Cl- compared to pristine SWCNTs of the same 2.2 nm diameter, while hydrodynamic slip lengths decreased by more than an order of magnitude. These results suggest that the single-layer graphene inner surface may be translucent to charge-regulation and hydrodynamic-slip effects arising from h-BN on the outside of the SWCNT. Such 1D heterostructures could serve as synthetic platforms with tunable properties for exploring distinct nanofluidic phenomena and their potential applications.

Liquid-infused interfacial floatable porous membrane as movable gate for ultrafast immiscible oil/water separation

Liquid separation methods are widely used in industrial and everyday applications, however, their applicability is often constrained by low efficiency, membrane fouling, and poor energy efficiency. Herein, a conceptually novel liquid-infused interfacial floatable porous membrane (LIIFPM) system for high-performance oil/water separation is proposed. The system functions by allowing a liquid to wet and fill a superamphiphilic porous membrane, thereby creating a stable liquid-infused interface that floats at the oil/water interface and prevents the passage of immiscible liquids. The lower-layer liquid can outflow directly, while the flow of the upper-layer liquid is stopped by the membrane. Remarkably, the efficiency of the LIIFPM system is independent of the membrane pore size, enabling ultrafast immiscible oil/water separation in an energy-saving and antifouling manner.

Carbon nanotube-wastewater treatment nexus: Where are we heading to?

Water treatment is crucial in solving the rising people's appetite for water and global water shortages. Carbon nanotubes (CNTs) have considerable promise for water treatment because of their adjustable and distinctive arbitrary, physical, as well as chemical characteristics. This illustrates the benefits and risks of integrating CNT into the traditional water treatment resource. Due to their outstanding adsorbent ability and chemical and mechanical properties, CNTs have gained global consideration in environmental applications. The desalination and extraction capability of CNT were improved due to chemical or physical modifications in pure CNTs by various functional groups. The CNT-based composites have many benefits, such as antifouling performance, high selectivity, and increased water permeability. Nevertheless, their full-scale implementations are still constrained by their high costs. Functionalized CNTs and their promising nanocomposites to eliminate contaminants are advised for marketing and extensive water/wastewater treatment.

Dry-spun carbon nanotube ultrafiltration membranes tailored by anti-viral metal oxide coatings for human coronavirus 229E capture in water

Although waterborne virus removal may be achieved using separation membrane technologies, such technologies remain largely inefficient at generating virus-free effluents due to the lack of anti-viral reactivity of conventional membrane materials required to deactivating viruses. Here, a stepwise approach towards simultaneous filtration and disinfection of Human Coronavirus 229E (HCoV-229E) in water effluents, is proposed by engineering dry-spun ultrafiltration carbon nanotube (CNT) membranes, coated with anti-viral SnO2 thin films via atomic layer deposition. The thickness and pore size of the engineered CNT membranes were fine-tuned by varying spinnable CNT sheets and their relative orientations on carbon nanofibre (CNF) porous supports to reach thicknesses less than 1 µm and pore size around 28 nm. The nanoscale SnO2 coatings were found to further reduce the pore size down to ∼21 nm and provide more functional groups on the membrane surface to capture the viruses via size exclusion and electrostatic attractions. The synthesized CNT and SnO2 coated CNT membranes were shown to attain a viral removal efficiency above 6.7 log10 against HCoV-229E virus with fast water permeance up to ∼4 × 103 and 3.5 × 103 L.m-2.h-1.bar-1, respectively. Such high performance was achieved by increasing the dry-spun CNT sheets up to 60 layers, orienting successive 30 CNT layers at 45°, and coating 40 nm SnO2 on the synthesized membranes. The current study provides an efficient scalable fabrication scheme to engineer flexible ultrafiltration CNT-based membranes for cost-effective filtration and inactivation of waterborne viruses to outperform the state-of-the-art ultrafiltration membranes.

Enhanced Catalytic Hydrodeoxygenation of Activated Carbon-Supported Metal Catalysts via Rapid Plasma Surface Functionalization

We employ a nonthermal, He/O₂ atmospheric plasma as an efficient surface functionalization method of activated carbons. We show that plasma treatment rapidly increases the surface oxygen content from 4.1 to 23.4% on a polymer-based spherical activated carbon in 10 min. Plasma treatment is 3 orders of magnitude faster than acidic oxidation and introduces a diverse range of carbonyl (C═O) and carboxyl (O-C═O) functionalities that were not found with acidic oxidation. The increased oxygen functionalities reduce the particle size of a high 20 wt % loading Cu catalyst by >44% and suppress the formation of large agglomerates. Increased metal dispersion exposes additional active sites and improves the yield of hydrodeoxygenation of 5-hydroxymethyl furfural to 2,5-dimethyl furan, an essential compound for biofuel replacement, by 47%. Surface functionalization via plasma can advance catalysis synthesis while being rapid and sustainable.

A Microwave-Assisted, Solvent-Free Approach for the Versatile Functionalization of Carbon Nanotubes

While the functionalization of carbon nanotubes (CNTs) has attracted extensive interest for a wide range of applications, a facial and versatile strategy remains in demand. Here, we report a microwave-assisted, solvent-free approach to directly functionalize CNTs both in raw form and in arbitrary macroscopic assemblies. Rapid microwave irradiation was applied to generate active sites on the CNTs while not inducing excessive damage to the graphitic network, and a gas-phase deposition afforded controllable grafting for thorough or regioselective functionalization. Using methyl methacrylate (MMA) as a model functional group and a CNT sponge as a model assembly, homogeneous grafting was exhibited by the increased robust hydrophobicity (contact angle increase from 30 to 140°) and improved structural stability (compressive modulus increased by 135%). Therefore, when our MMA-functionalized CNTs served as a solar absorber for saline distillation, high operating stability with a superior water evaporation rate of ∼2.6 kg m^-2 h^-1 was observed. Finally, to highlight the efficacy and versatility of this functionalization approach, we fabricated asymmetrically hydrophobic CNT sponges by regioselective functionalization to serve as a moisture-driven generator, which demonstrated a stable open-circuit voltage of 0.6 mV. This versatile, solvent-free approach can complement conventional solution-based techniques in the design and fabrication of multifunctional nanocarbon-based materials.

Applications of advanced MXene-based composite membranes for sustainable water desalination

MXenes are an innovative class of 2D nanostructured materials gaining popularity for various uses in medicine, chemistry, and the environment. A larger outer layer area, exceptional stability and conductivity of heat, high porosity, and environmental friendliness are all characteristics of MXenes and their composites. As a result, MXenes have been used to produce Li-ion batteries, semiconductors, water desalination membranes, and hydrogen storage. MXenes have recently been used in many environmental remediations, frequently surpassing conventional materials, to treat groundwater contamination, surface waters, industrial and municipal wastewaters, and desalination. Due to their outstanding structural characteristics and the enormous specific surface area, they are widely utilized as adsorbents or membrane materials for the desalination of seawater. When used for electrochemical applications, MXene-composites can deionize via Faradaic capacitive deionization (CDI) and adsorb various organic and inorganic pollutants to treat the water. In general, as compared to other 2D nanomaterials, MXene has superb characteristics; because of their magnificent characteristics and they exhibit strong desalination capability. The current review paper discusses the desalination capability of MXenes and their composites. Focusing on the desalination capacity of MXene-based nanomaterials, this study discusses the characteristics and synthesis techniques of MXenes their composites along with their ion-rejection capability and pervaporation desalination of water via MXene-based membranes, capacitive deionization capability, solar desalination capability. Furthermore, the challenges and prospects of MXenes and their composites are highlighted.

An open-source deep learning model for predicting effluent concentration in capacitive deionization

To effectively evaluate the performance of capacitive deionization (CDI), an electrochemical ion separation technology, it is necessary to accurately estimate the number of ions removed (effluent concentration) according to energy consumption. Herein, we propose and evaluate a deep learning model for predicting the effluent concentration of a CDI process. The developed deep learning model exhibited excellent prediction accuracy for both constant current and constant voltage modes (R² ≥ 0.968), and the accuracy increased with the data size. This model was based on the open-source language, Python, and the code has since been distributed with proper instructions for general use. Owing to the nature of the data-oriented deep learning model, the findings of this study are not only applicable to conventional CDI but also to various types of CDI (membrane CDI, flow CDI, faradaic CDI, etc.). Therefore, by referring to the examples shown in this study, we hope that this open-source deep learning code will be widely used in CDI research.

Highly ordered CaO from cuttlefish bone calcination for the efficient adsorption of methylene blue from water

The aim of this study is to synthesize cheap and highly ordered CaO from cuttlefish bone (CFB) as a green alternative to conventional adsorbents such as activated carbon. This study focuses on the synthesis of highly ordered CaO via calcination of CFB, at two different temperatures (900 and 1000°C) and two holding times (0.5 and 1 h), as a potential green route for water remediation. The as-prepared highly ordered CaO was tested as an adsorbent using methylene blue (MB) as a model compound for dye contaminants in water. Different CaO adsorbent doses (0.05, 0.2, 0.4, and 0.6 g) were used, keeping the MB concentration fixed at 10 mg/L. The morphology and crystalline structure of the CFB before and after calcination was characterized via scanning electron microscope (SEM) and X-ray diffraction (XRD) analyses, while the thermal behavior and surface functionalities were characterized by thermogravimetric analysis (TGA) and Fourier transform infrared (FTIR) spectroscopy, respectively. Adsorption experiments using different doses of CaO synthesized at 900°C for 0.5 h showed an MB removal efficiency as high as 98% by weight using 0.4 g (adsorbent)/L(solution). Two different adsorption models, the Langmuir adsorption model and the Freundlich adsorption model, along with pseudo-first-order and pseudo-second-order kinetic models, were studied to correlate the adsorption data. The removal of MB via highly ordered CaO adsorption was better modeled by the Langmuir adsorption isotherm giving (R² =0.93), thus proving a monolayer adsorption mechanism following pseudo-second-order kinetics (R²= 0.98), confirming that chemisorption reaction occurs between the MB dye molecule and CaO.

Plant Polyphenol Pyrogallol and Polyamine-Based Co-Deposition for High-Efficiency Nanofiltration Membrane Preparation towards Inorganic Salt Removal

The co-deposition between polyphenols and amines has been demonstrated in order to prepare positively charged nanofiltration (NF) membranes for multivalent cation rejection in recent years; however, the low reactivities of the involved polyphenols usually cause a long co-deposition time and unsatisfactory rejection. Herein, a novel plant polyphenol (PG) was co-deposited with tetraethylenepentamine (TEPA) in a much shorter time period to prepare positively charged NF with high multivalent cation rejection membranes. The performance of the co-deposition membranes can be easily controlled by adjusting the mass ratio of PG and TEPA, reaction time, and pH value of the buffer solution. The optimal membrane, prepared under a polyphenol and polyamine mass ratio of 1:1, coating time of 2 h, and pH value of 8.0, shows a decent pure water permeability of 8.43 L m^-2 h^-1 bar^-1 while maintaining a superior 96.24% MgCl₂ rejection. More importantly, the universality of this method was corroborated by employing other amines with different molecular weights in the co-deposition. This work provides new insights for the preparation of high-performance positively charged NF membranes.

Exposure of carbon nanotubes affects testis and brain of common carp

Carbon nanotubes production has been rapidly increasing for many potential applications, however, the environmental impact of this nanomaterial needs to be comprehended. The present work focused on unraveling the effects of single-walled carbon nanotubes (SWCNT) in the common carp, Cyprinus carpio. The physicochemical properties of SWCNT were analyzed with X-ray diffraction, Fourier transforms infra-red, UV-Vis absorption, transmission electron microscopy (TEM), and Raman spectroscopy before testing for exposure impact. The effects of SWCNT, were investigated by exposing to two doses viz., 10 and 50 μg/L, for 7 days in adult common carp, in vivo. Expression of key steroidogenic and transcription factor genes related to testis and brain were downregulated after the treatment. The concomitant decreases in serum testosterone and 11-ketotestosterone levels revealed the impact of SWCNT after exposure. Further, SWCNT exposure induced antioxidant enzymes namely glutathione-S-transferases, superoxide dismutase, and catalase in both testis and brain. Concurrently, histological and TEM analysis of testis revealed structural disarray. In addition, SWCNT treatment, in testicular and brain primary cell cultures decreased cell viability with an increase of reactive oxygen species levels, leading to a significant elevation of apoptotic cells. In line with this, low mitochondrial membrane potential and DNA damage were also observed during post SWCNT treatment. Taken together, transient exposure of SWCNT causes toxic effects and alters testicular and brain function in the common carp. Thus, the discharge of carbon nanotubes poses a greater risk to the aquatic environment warranting regulatory measures.

Efficient and Durable Sodium, Chloride-doped Iron Oxide-Hydroxide Nanohybrid-Promoted Capacitive Deionization of Saline Water via Synergetic Pseudocapacitive Process

Recently, the rational design and development of efficient faradaic deionization electrodes with high theoretical capacitance, natural abundance, and attractive conductivity have shown great promise for outstanding capacitive deionization (CDI)-based desalination applications. Herein, the construction of novel FeOOH hybrid heterostructures with Na and Cl dopants (e.g., Na-FeOOH and Cl-FeOOH) via a robust hydrothermal strategy is reported, and an asymmetric CDI cell (Na-FeOOH//Cl-FeOOH) comprising Na-FeOOH and Cl-FeOOH working as the cathode and anode, respectively, is assembled. The multiple coupling effects of the specific structural features (e.g., enriched porosity, hierarchical pore alignment, and highly open crystalline framework), enhanced electrochemical conductivity, and optimized ion-transfer property endow the FeOOH hybrid electrode with improved electrochemical performance. Impressively, the Na-FeOOH//Cl-FeOOH cell demonstrates a superior salt adsorption capacity (SACNaCl ) of 35.12 mg g-1 in a 500 mg L-1 NaCl solution, a faster removal rate, and remarkable cycling stability. Moreover, the pseudocapacitive removal mechanism from the synergetic contribution of the Na-FeOOH cathode and Cl-FeOOH anode account for the significant desalination promotion of the Na-FeOOH//Cl-FeOOH cell.

Reclaimable MoS2 Sponge Absorbent for Drinking Water Purification Driven by Solar Energy

With the fast development of modern industries, scarcity of freshwater resources caused by heavy metal pollution (i.e., Hg²⁺) has become a severe issue for human beings. Herein, a 3D-MoS₂ sponge as an excellent absorbent is fabricated for mercury removal due to its multidimensional adsorption pathways, which decreases the biomagnification effect of methylmercury in water bodies. Furthermore, a secondary water purification strategy is employed to harvest drinkable water with the exhausted adsorbents, thus alleviating the crisis of drinking water shortage. Compared to the conventional landfill treatment, the exhausted MoS₂ sponge absorbents are further functionalized with a poly(ethylene glycol) (PEG) layer to prevent the heavy metals from leaking and enhance the hydrophilicity for photothermal conversion. The fabricated evaporator displays excellent evaporation rates of ∼1.45 kg m^-2 h^-1 under sunlight irradiation and produces freshwater with Hg²⁺ under the WHO drinking water standard at 0.001 mg L^-1. These results not only assist in avoiding the biodeposition effect of mercury in water but also provide an environment-friendly strategy to recycle hazardous adsorbents for water purification.

Direct Observation of the Vapor-Liquid Phase Transition and Hysteresis in 2 nm Nanochannels

The characterization of fluid phase transitions in nanoscale pores remains a challenging problem that can significantly affect various applications, such as drug delivery, carbon dioxide storage, and enhanced oil recovery. Previous theoretical and experimental studies have shown that the fluid phase transition changes drastically when the fluid is confined within nanocapillaries with dimensions of <10 nm, potentially due to the dominance of fluid-surface interactions compared to bulk effects. However, due to challenges in performing experiments at the nanoscale, there have been limited experimental observations of the phase transition at this scale. Recent advances in lab-on-a-chip (LOC) technology have enabled the observation of many nanoscale phenomena. In this study, for the first time, we present the direct observation and visualization of n-butane vapor-liquid phase transitions in a 2 nm slit pore using LOC technology. Our experiments, for the first time, measured and directly visualized the deviation of the vapor-liquid phase transition pressure in a 2 nm slit pore compared to the associated unconfined or bulk value. We also measured the liquid-vapor phase transition pressure and observed a significant difference from the vapor-liquid phase transition pressure. We complemented our experimental observations with grand canonical ensemble Monte Carlo molecular simulations to understand the underlying molecular-level mechanisms.

Leachate treatment potential of nanomaterial based assemblies: a systematic review on recent development

Rapid development of the population has brought about a serious problem of waste generation and management. Open dumping and land filling are two of the preferred options for waste management and treatment. As a consequence of this, the accumulation of leachates has become one of the concerns for environmental sustainability. In this regard, various treatment methodologies have been developed in recent decades. Among them, the nanomaterial-based approaches are the emerging ones in the current scenario due to their various unique properties. Furthermore, nanomaterial-based assemblies (i.e., nanomaterials combined with microbes, chemical catalysts, enzymes, and so on) have been introduced as a novel modification for leachate treatment. This work, therefore, has been dedicated to comprehensively reviewing all nanomaterial based leachate treatment techniques. In this regard, the first part of this review will discuss the nano catalyst, nano adsorbent along with their synthesis and mechanistic view of pollutant removal potential. In the second part, the nanomaterial-based microbial conjugates applied in the leachate treatments have been discussed. Apart from this, various other nanomaterial-based methods have been discussed in the third part of the review. Hence this review is providing an insight of all the recent developments pertaining to the nano material based leachate treatment techniques.

Constructing titanium carbide MXene/reduced graphene oxide superlattice heterostructure via electrostatic self-assembly for high-performance capacitive deionization

Capacitive deionization has attracted wide concern on accountof its high energy efficiency, low manufacturing cost and environmental friendliness. Nevertheless, the development of capacitive deionization is still impeded because of the scarcity of suitable electrode materials with superior performance. Herein, we successfully prepared the two-dimensional (2D) titanium carbide (Ti₃C₂T_x) MXene/ reduced graphene oxide (rGO) superlattice heterostructure by a facile electrostatic self-assembly strategy and systematically investigated its performance as capacitive deionized electrode materials. The unique 2D/2D superlattice heterostructure not only effectively alleviates the self-stacking problem of Ti₃C₂T_x MXene nanosheets, but also endows the heterostructure with superior conductivity and fast ion diffusion rate. As a result, the MXene/rGO superlattice heterostructure exhibits an outstanding salt (Na⁺) adsorption capacity (48 mg g^-1) at 1.2 V significantly superior to pristine Ti₃C₂T_x MXene nanosheets, along with outstanding long-term cycling performance. Furthermore, the mechanism involved was elucidated through comprehensive characterizations. Therefore, this study offers a new pathway for designing high-performance electrode materials for capacitive deionization.

Properties and applications of boron nitride nanotubes

Nanomaterials have received increasing attention due to their controllable physical and chemical properties and their improved performance over their bulk structures during the last years. Carbon nanostructures are one of the most widely searched materials for use in different applications ranging from electronic to biomedical because of their exceptional physical and chemical properties. However, BN nanostructures surpassed the attention of the carbon-based nanostructure because of their enhanced thermal and chemical stabilities in addition to structural similarity with the carbon nanomaterials. Among these nanostructures, one dimensional-BN nanostructures are on the verge of development as new materials to fulfill some necessities for different application areas based on their excellent and unique properties including their tunable surface and bandgap, electronic, optical, mechanical, thermal, and chemical stability. Synthesis of high-quality boron nitride nanotubes (BNNTs) in large quantities with novel techniques provided greater access, and increased their potential use in nanocomposites, biomedical fields, and nanodevices as well as hydrogen uptake applications. In this review, properties and applications of one-dimensional BN (1D) nanotubes, nanofibers, and nanorods in hydrogen uptake, biomedical field, and nanodevices are discussed in depth. Additionally, research on native and modified forms of BNNTs and also their composites with different materials to further improve electronic, optical, structural, mechanical, chemical, and biological properties are also reviewed. BNNTs find many applications in different areas, however, they still need to be further studied for improving the synthesis methods and finding new possible future applications.

The effect of crosslinking on ion transport in nanocellulose-based membranes

Ion selective membranes are at the heart of energy conversion and harvesting, water treatment, and biotechnologies. The currently available membranes are mostly based on expensive and non-biodegradable polymers. Here, we report a cation-selective and low-cost membrane prepared from renewable nanocellulose and 1,2,3,4-butanetetracarboxylic acid which simultaneously serves as crosslinker and source of anionic surface groups. Charge density and structure of the membranes are studied. By using different degrees of crosslinking, simultaneous control over both the nanochannel structure and surface charge concentration is achieved, which in turn determines the resulting ion transport properties. Increasing negative charge concentration via higher crosslinker content, the obtained ion conductivity reaches up to 8 mS/cm (0.1 M KCl). Optimal ion selectivity, also influenced by the solution pH, is achieved at 20 wt% crosslinker addition (with ion conductivity of 1.6 mS/cm). As regular ~1.4 nm nanochannels were formed at this composition, nanofluidic contribution to ion transport is likely.

Development and Characterization of Silver-Doped Multi-Walled Carbon Nanotube Membranes for Water Purification Applications

A unique approach was utilized to develop multi-walled carbon nanotube (MWCNT) silver (Ag) membranes. MWCNTs were impregnated with 1 wt% Ag loading, which resulted in a homogeneous dispersion of Ag in MWCNTs. MWCNTs impregnated with Ag were then uniaxially compacted at two different pressures of 80 MPa and 120 MPa to form a compact membrane. Compacted membranes were then sintered at two different temperatures of 800 °C and 900 °C to bind Ag particles with MWCNTs as Ag particles also act as a welding agent for CNTs. The powder mixture was characterized by FESEM, thermogravimetric analysis, and XRD, while the developed samples were characterized by calculating the porosity of membrane samples, contact angle, water flux and a diametral compression test. The developed membranes showed overall large water flux, while maximum porosity was found to decrease as the compaction load and sintering temperature increased. The mechanical strength of the membranes was found to increase as the compaction load increased. The hydrophilicity of the membranes remained unchanged after the addition of Ag particles. The developed membranes would be useful for removing a variety of contaminants from water.

Applications of Green Synthesized Nanomaterials in Water Remediation

Water is the most important component on the earth for living organisms. With industrial development, population increase and climate change, water pollution becomes a critical issue around the world. Its contamination with different types of pollutants created naturally or due to anthropogenic activities has become the most concerned global environmental issue. These contaminations destroy the quality of water and become harmful to living organisms. A number of physical, chemical and biological techniques have been used for the purification of water, but they suffer in one or the other respect. The development of nanomaterials and nanotechnology has provided a better path for the purification of water. Compared to conventional methods using activated carbon, nanomaterials offer a better and economical approach for water remediation. Different types of nanomaterials acting as nanocatalysts, nanosorbents, nanostructured catalytic membranes, bioactive nanoparticles, nanomembranes and nanoparticles provide an alternative and efficient methodology in solving water pollution problems. However, the major issue with nanomaterials synthesized in a conventional way is their toxicity. In recent days, a considerable amount of research is being carried out on the synthesis of nanomaterials using green routes. Nanomaterials synthesized by using the green method are now being used in different technologies, including water remediation. The remediation of water by using nanomaterials synthesized by the green method has been reviewed and discussed in this paper.

Cellulose-Based Hectocycle Nanopolymers: Synthesis, Molecular Docking and Adsorption of Difenoconazole from Aqueous Medium

The goal of this work was to develop polymer-based heterocycle for water purification from toxic pesticides such as difenoconazole. The polymer chosen for this purpose was cellulose nanocrystalline (CNC); two cellulose based heterocycles were prepared by crosslinking with 2,6-pyridine dicarbonyl dichloride (Cell-X), and derivatizing with 2-furan carbonyl chloride (Cell-D). The synthesized cellulose-based heterocycles were characterized by SEM, proton NMR, TGA and FT-IR spectroscopy. To optimize adsorption conditions, the effect of various variable such as time, adsorbent dose, pH, temperature, and difenoconazole initial concentration were evaluated. Results showed that, the maximum difenoconazole removal percentage was about 94.7%, and 96.6% for Cell-X and Cell-D, respectively. Kinetic and thermodynamic studies on the adsorption process showed that the adsorption of difenoconazole by the two polymers is a pseudo-second order and follows the Langmuir isotherm model. The obtained values of ∆G ° and ∆H suggest that the adsorption process is spontaneous at room temperature. The results showed that Cell-X could be a promising adsorbent on a commercial scale for difenoconazole. The several adsorption sites present in Cell-X in addition to the semi crown ether structure explains the high efficiency it has for difenoconazole, and could be used for other toxic pesticides. Monte Carlo (MC) and Molecular Dynamic (MD) simulation were performed on a model of Cell-X and difenoconazole, and the results showed strong interaction.

Fabrication and application of nanoporous anodic aluminum oxide: a review

Due to the unique optical and electrochemical properties, large surface area, tunable properties, and high thermal stability, nanoporous anodic aluminum oxide (AAO) has become one of the most popular materials with a large potential to develop emerging applications in numerous areas, including biosensors, desalination, high-risk pollutants detection, capacitors, solar cell devices, photonic crystals, template-assisted fabrication of nanostructures, and so on. This review covers the mechanism of AAO formation, manufacturing technology, the relationship between the properties of AAO and fabrication conditions, and applications of AAO. Properties of AAO, like pore diameter, interpore distance, wall thickness, and anodized aluminum layer thickness, can be fully controlled by fabrication conditions, including electrolyte, applied voltage, anodizing and widening time. Generally speaking, the pore diameter of AAO will affect its specific application to a large extent. Moreover, manufacturing technology like one/two/multi step anodization, nanoimprint lithography anodization, and pulse/cyclic anodization also have a major impact on overall array arrangement. The review aims to provide a perspective overview of the relationship between applications and their corresponding AAO pore sizes, systematically. And the review also focuses on the strategies by which the structures and functions of AAO can be utilized.

Bismuth Nanoparticle-Embedded Porous Carbon Frameworks as a High-Rate Chloride Storage Electrode for Water Desalination

Capacitive deionization (CDI) is a promising cost-effective and low energy consumption technology for water desalination. However, most of the previous works focus on only one side of the CDI system, i.e., Na⁺ ion capture, while the other side that stores chloride ions, which is equally important, receives very little attention. This is attributed to the limited Cl^- storage materials as well as their sluggish kinetics and poor stability. In this article, we demonstrate that a N-doped porous carbon framework is capable of suppressing the phase-transformation-induced performance decay of bismuth, affording an excellent Cl^- storage and showing potential for water desalination. The obtained Bi-carbon composite (Bi/N-PC) shows a capacity of up to 410.4 mAh g^-1 at 250 mA g^-1 and a high rate performance. As a demonstration for water desalination, a superior desalination capacity of 113.4 mg g^-1 is achieved at 100 mA g^-1 with excellent durability. Impressively, the CDI system exhibits fast ion capturing with a desalination rate as high as 0.392 mg g^-1 s^-1, outperforming most of the recently reported Cl^- capturing electrodes. This strategy is applicable to other Cl^- storage materials for next-generation capacitive deionization.

Enhanced Ion Sieving of Graphene Oxide Membranes via Surface Amine Functionalization

Membranes based on two-dimensional (2D) nanomaterials have shown great potential to alleviate the worldwide freshwater crisis due to their outstanding performance of freshwater extraction from saline water via ion rejection. However, it is still very challenging to achieve high selectivity and high permeance of water desalination through precise d-spacing control of 2D nanomaterial membranes within subnanometer. Here, we developed functionalized graphene oxide membranes (FGOMs) with nitrogen groups such as amine groups and polarized nitrogen atoms to enhance metal ion sieving by one-step controlled plasma processing. The nitrogen functionalities can produce strong electrostatic interactions with metal ions and result in a mono/divalent cation selectivity of FGOMs up to 90 and 28.3 in single and binary solution, which is over 10-fold than that of graphene oxide membranes (GOMs). First-principles calculation confirms that the ionic selectivity of FGOMs is induced by the difference of binding energies between metal ions and polarized nitrogen atoms. Besides, the ultrathin FGOMs with a thickness of 50 nm can possess a high water flux of up to 120 mol m^-2 h^-1 without sacrificing rejection rates of nearly 99.0% on NaCl solution, showing an ultrahigh water/salt selectivity of around 4.31 × 10³. Such facile and efficient plasma processing not only endows the GOMs with a promising future sustainable water purification, including ion separation and water desalination, but also provides a new strategy to functionalize 2D nanomaterial membranes for specific purposes.

Recent development of autonomously driven micro/nanobots for efficient treatment of polluted water

Autonomously propelled micro/nanobots are one of the most advanced and integrated structures which have been fascinated researchers owing to its exceptional property that enables them to be carried out user-defined tasks more precisely even on an atomic scale. The unique architecture and engineering aspects of these manmade tiny devices make them viable options for widespread biomedical applications. Moreover, recent development in this line of interest demonstrated that micro/nanobots would be very promising for the water treatment as these can efficiently absorb or degrade the toxic chemicals from the polluted water based on their tunable surface chemistry. These auto propelled micro/nanobots catalytically degrade toxic pollutants into non-hazardous compounds more rapidly and effectively. Thus, for the last few decades, nanobots mediated water treatment gaining huge popularity due to its ease of operation and scope of guided motion that could be monitored by various external fields and stimuli. Also, these are economical, energy-saving, and suitable for large scale water treatment, particularly required for industrial effluents. However, the efficacy of these bots hugely relies on its design, characteristic of materials, properties of the medium, types of fuel, and surface functional groups. Minute variation for one of these things may lead to a change in its performance and hinders its dynamics of propulsion. It is deemed that nanobots might be a smart choice for using these as the new generation devices for treating industrial effluents before discharging it in the water bodies, which is a major concern for human health and the environment.

Novel, Environment-Friendly Cellulose-Based Derivatives for Tetraconazole Removal from Aqueous Solution

In this study, cellulose-based derivatives with heterocyclic moieties were synthesized by reacting cellulose with furan-2-carbonyl chloride (Cell-F) and pyridine-2,6-dicarbonyl dichloride (Cell-P). The derivatives were evaluated as adsorbents for the pesticide tetraconazole from aqueous solution. The prepared adsorbents were characterized by SEM, TGA, IR, and H¹ NMR instruments. To maximize the adsorption efficiency of tetraconazole, the optimum conditions of contact time, pH, temperature, adsorbent dose, and initial concentration of adsorbate were determined. The highest removal percentage of tetraconazole from water was 98.51% and 95% using Cell-F and Cell-P, respectively. Underivatized nanocellulose was also evaluated as an adsorbent for tetraconazole for comparison purpose, and it showed a removal efficiency of about 91.73%. The best equilibrium adsorption isotherm model of each process was investigated based on the experimental and calculated R² values of Freundlich and Langmuir models. The adsorption kinetics were also investigated using pseudo-first-order, pseudo-second-order, and intra-particle-diffusion adsorption kinetic models. The Van’t Hoff plot was also studied for each adsorption to determine the changes in adsorption enthalpy (∆H), Gibbs free energy (∆G), and entropy (∆S). The obtained results showed that adsorption by Cell-F and Cell-P follow the Langmuir adsorption isotherm and the mechanism follows the pseudo-second-order kinetic adsorption model. The obtained negative values of the thermodynamic parameter ∆G (−4.693, −4.792, −5.549 kJ) for nanocellulose, Cell-F, and Cell-P, respectively, indicate a spontaneous adsorption process. Cell-F and Cell-P could be promising absorbents on a commercial scale for tetraconazole and other pesticides.

Adjustable diffusion enhancement of water molecules in a nanoscale water bridge

The emergence of nanofluidics in the last few decades has led to the development of various applications such as water desalination, ultrafiltration, osmotic energy conversion, etc. In particular, understanding water molecule transport in nanotubes is of importance for designing novel ultrafiltration and filtering devices. In this paper, we use an electric field to form a nanoscale water bridge as an artificial water channel to connect two separate disjoint nanotubes by molecular dynamics simulations. The extended length of the water bridge under different electric field strengths could adjust the diffusion process of the water molecules crossing the two disjoint nanotubes and the diffusion coefficients could be remarkably enhanced up to 4 times larger than the value in bulk water. By analyzing the structure of the water bridge, it is found that the diffusion enhancement originates from the strengthened interactions and the increase of hydrogen bonds between the water molecules due to the restrained reorientation from the external electric field. Our result provides a promising insight for realizing an efficient mass transport between various disjoint nanochannels.

Click Chemistry Enabling Covalent and Non-Covalent Modifications of Graphene with (Poly)saccharides

Graphene is a material with outstanding properties and numerous potential applications in a wide range of research and technology areas, spanning from electronics, energy materials, sensors, and actuators to life-science and many more. However, the insolubility and poor dispersibility of graphene are two major problems hampering its use in certain applications. Tethering mono-, di-, or even poly-saccharides on graphene through click-chemistry is gaining more and more attention as a key modification approach leading to new graphene-based materials (GBM) with improved hydrophilicity and substantial dispersibility in polar solvents, e.g., water. The attachment of (poly)saccharides on graphene further renders the final GBMs biocompatible and could open new routes to novel biomedical and environmental applications. In this review, recent modifications of graphene and other carbon rich materials (CRMs) through click chemistry are reviewed.

Transport Phenomena in Nano/Molecular Confinements

The transport of fluid and ions in nano/molecular confinements is the governing physics of a myriad of embodiments in nature and technology including human physiology, plants, energy modules, water collection and treatment systems, chemical processes, materials synthesis, and medicine. At nano/molecular scales, the confinement dimension approaches the molecular size and the transport characteristics deviates significantly from that at macro/micro scales. A thorough understanding of physics of transport at these scales and associated fluid properties is undoubtedly critical for future technologies. This compressive review provides an elaborate picture on the promising future applications of nano/molecular transport, highlights experimental and simulation metrologies to probe and comprehend this transport phenomenon, discusses the physics of fluid transport, tunable flow by orders of magnitude, and gating mechanisms at these scales, and lists the advancement in the fabrication methodologies to turn these transport concepts into reality. Properties such as chain-like liquid transport, confined gas transport, surface charge-driven ion transport, physical/chemical ion gates, and ion diodes will provide avenues to devise technologies with enhanced performance inaccessible through macro/micro systems. This review aims to provide a consolidated body of knowledge to accelerate innovation and breakthrough in the above fields.

Processing Methods Used in the Fabrication of Macrostructures Containing 1D Carbon Nanomaterials for Catalysis

A large number of methodologies for fabrication of 1D carbon nanomaterials have been developed in the past few years and are extensively described in the literature. However, for many applications, and in particular in catalysis, a translation of the materials to a macro-structured form is often required towards their use in practical operation conditions. This review intends to describe the available methods currently used for fabrication of such macro-structures, either already applied or with potential for application in the fabrication of macro-structured catalysts containing 1D carbon nanomaterials. A review of the processing methods used in the fabrication of macrostructures containing 1D sp2 hybridized carbon nanomaterials is presented. The carbon nanomaterials here discussed include single- and multi-walled carbon nanotubes, and several types of carbon nanofibers (fishbone, platelet, stacked cup, etc.). As the processing methods used in the fabrication of the macrostructures are generally very similar for any of the carbon nanotubes or nanofibers due to their similar chemical nature (constituted by stacked ordered graphene planes), the review aggregates all under the carbon nanofiber (CNF) moniker. The review is divided into methods where the CNFs are synthesized already in the form of a macrostructure (in situ methods) or where the CNFs are previously synthesized and then further processed into the desired macrostructures (ex situ methods). We highlight in particular the advantages of each approach, including a (non-exhaustive) description of methods commonly described for in situ and ex situ preparation of the catalytic macro-structures. The review proposes methods useful in the preparation of catalytic structures, and thus a number of techniques are left out which are used in the fabrication of CNF-containing structures with no exposure of the carbon materials to reactants due to, for example, complete coverage of the CNF. During the description of the methodologies, several different macrostructures are described. A brief overview of the potential applications of such structures in catalysis is also offered herein, together with a short description of the catalytic potential of CNFs in general.