The dynamics of methylammonium ions in hybrid organic-inorganic perovskite solar cells

Operating Mechanism Principles and Advancements for Halide Perovskite-Based Memristors and Neuromorphic Devices

With the advent of the generation of artificial intelligence (AI) based on big data-processing technologies, next-generation memristor and memristive neuromorphic devices have been actively studied with great interest to overcome the von Neumann bottleneck limits. Among various candidates, halide perovskites (HPs) have been in the spotlight as potential candidates for these devices due to their unique switching characteristics with low energy consumption and flexible integration compatibility across various sources for scalability. We outline the characteristics and operating principles of HP-based memristors and their neuromorphic devices. We explain filamentary- and interface-type switching according to the type of conducting pathway occurring inside the active HP layer and the operating mechanisms depending on the species that make up this conducting pathway. We summarize the types and mechanisms of current changes beneficial for neuromorphic device applications and finally organize various suggested analysis tools and physical models to enable experimental determination of switching mechanisms from various perspectives.

3D Lead-Organoselenide-Halide Perovskites and their Mixed-Chalcogenide and Mixed-Halide Alloys

We incorporate Se into the 3D halide perovskite framework using the zwitterionic ligand: SeCYS (+NH3(CH2)2Se-), which occupies both the X- and A+ sites in the prototypical ABX3 perovskite. The new organoselenide-halide perovskites: (SeCYS)PbX2 (X=Cl, Br) expand upon the recently discovered organosulfide-halide perovskites. Single-crystal X-ray diffraction and pair distribution function analysis reveal the average structures of the organoselenide-halide perovskites, whereas the local lead coordination environments and their distributions were probed through solid-state 77Se and 207Pb NMR, complemented by theoretical simulations. Density functional theory calculations illustrate that the band structures of (SeCYS)PbX2 largely resemble those of their S analogs, with similar band dispersion patterns, yet with a considerable band gap decrease. Optical absorbance measurements indeed show band gaps of 2.07 and 1.86 eV for (SeCYS)PbX2 with X=Cl and Br, respectively. We further demonstrate routes to alloying the halides (Cl, Br) and chalcogenides (S, Se) continuously tuning the band gap from 1.86 to 2.31 eV-straddling the ideal range for tandem solar cells or visible-light photocatalysis. The comprehensive description of the average and local structures, and how they can fine-tune the band gap and potential trap states, respectively, establishes the foundation for understanding this new perovskite family, which combines solid-state and organo-main-group chemistry.

Backscattering silicon spectrometer (BASIS): sixteen years in advanced materials characterization

Quasielastic neutron scattering (QENS) is an experimental technique that can measure parameters of mobility, such as diffusion jump rate and jump length, as well as localized relaxations of chemical species (molecules, ions, and segments) at atomic and nanometer length scales. Due to the high penetrative power of neutrons and their sensitivity to neutron scattering cross-section of chemical species, QENS can effectively probe mobility inside most bulk materials. This review focuses on QENS experiments performed using a neutron backscattering silicon spectrometer (BASIS) to explore the dynamics in various materials and understand their structure-property relationship. BASIS is a time-of-flight near-backscattering inverted geometry spectrometer with very high energy resolution (approximately 0.0035 meV of full width at half maximum), allowing measurements of dynamics on nano to picosecond timescales. The science areas studied with BASIS are diverse, with a focus on soft matter topics, including traditional biological and polymer science experiments, as well as measurements of fluids ranging from simple hydrocarbons and aqueous solutions to relatively complex room-temperature ionic liquids and deep-eutectic solvents, either in the bulk state or confined. Additionally, hydrogen confined in various materials is routinely measured on BASIS. Other topics successfully investigated at BASIS include quantum fluids, spin glasses, and magnetism. BASIS has been in the user program since 2007 at the Spallation Neutron Source of the Oak Ridge National Laboratory, an Office of Science User Facility supported by the U.S. Department of Energy. Over the past sixteen years, BASIS has contributed to various scientific disciplines, exploring the structure and dynamics of many chemical species and their fabrication for practical applications. A comprehensive review of BASIS contributions and capabilities would be an asset to the materials science community, providing insights into employing the neutron backscattering technique for advanced materials characterization.

Visible-Photo-Assisted Phase Switching of Antiferroelectric-to-Ferroelectric Orders in an I3 --Intercalated 2D Perovskite

Antiferroelectric (AFE) has emerged as a promising branch of electroactive materials, due to intriguing physical attributes stemming from the electric field-induced antipolar-to-polar phase transformation. However, the requirement of extremely high electric field strength to switch adjacent sublattice polarization poses great challenges for exploiting new molecular AFE system. Although photoirradiation is striking as a noncontact and nondestructive manipulation tool to optimize physical properties, optical control of antiferroelectricity still remains unexplored. Here, by adopting light-sensitive I3 - anion into 2D perovskite family, we design a new I3 --intercalated molecular AFE of (t-ACH)2EA2Pb3I10(I3)0.5 ⋅ ((H3O)(H2O))0.5 (1, t-ACH=trans-4-aminomethyl-1-cyclohexanecarboxylate, EA=ethylammonium). The I3 --intercalating gives an ultra-narrow band gap of 1.65 eV with strong absorption. In term of AFE structure, the anti-parallel alignment of electric dipoles results in a large spontaneous polarization of 4.3 μC/cm2. Strikingly, 1 merely shows AFE behaviour in the dark even under ultrahigh voltage, while the field-induced ferroelectric state can be facilely obtained upon visible illumination. Such unprecedented visible-photo-assisted phase switching ascribes to the incorporation of photoactive I3 - anions that reduces AFE-to-ferroelectric switching barrier. This pioneering work on the photo-assisting transformation of ferroic orders paves a way to develop future photoactive materials with potential applications.

Unprecedented Richness of Temperature- and Pressure-Induced Polymorphism in 1D Lead Iodide Perovskite

Inherent features of metal halide perovskites are their softness, complex lattice dynamics, and phase transitions spectacularly tuning their structures and properties. While the structural transformations are well described and classified in 3D perovskites, their 1D analogs are much less understood. Herein, both temperature- and pressure-dependent structural evolutions of a 1D AcaPbI3 perovskitoid incorporating acetamidinium (Aca) cation are examined. The study reveals the existence of nine phases of δ-AcaPbI3, which present the most diverse polymorphic collection among known perovskite materials. Interestingly, temperature- and pressure-triggered phase transitions in the 1D perovskotoid exhibit fundamentally different natures: the thermal transformations are mainly associated with the collective translations of rigid polyanionic units and ordering/disordering dynamics of Aca cations, while the compression primarily affects inorganic polymer chains. Moreover, in the 1-D chains featuring the face-sharing connection mode of the PbI6 octahedra the Pb···Pb distances are significantly shortened compared to the corner-sharing 3D perovskite frameworks, hence operating in the van der Waals territory. Strikingly, a good correlation is found between the Pb···Pb distances and the pressure evolution of the bandgap values in the δ-AcaPbI3, indicating that in 1D perovskitoid structures, the contacts between Pb2+ ions are one of the critical parameters determining their properties.

Large dynamic scissoring mode displacements coupled to band gap opening in the cubic phase of the methylammonium lead halide perovskites

Hybrid perovskites are a rapidly growing research area, having reached photovoltaic power conversion efficiencies of over 25%. There is a increasing consensus that the structures of these materials, and hence their electronic structures, cannot be understood purely from the time and space averaged crystal structures observable by conventional methods. We apply a symmetry-motivated analysis method to analyse x-ray pair distribution function data of the cubic phases of the hybrid perovskites MAPbX3(X= I, Br, Cl). We demonstrate that, even in the cubic phase, the local structure of the inorganic components of MAPbX3(X= I, Br, Cl), are dominated by scissoring type deformations of the PbX6octahedra. We find these modes to have a larger amplitude than equivalent distortions in theA-site deficient perovskite ScF3and demonstrate that they show a significant departure from the harmonic approximation. Calculations performed on an inorganic perovskite analogue, FrPbBr3, show that the large amplitudes of the scissoring modes are coupled to a dynamic opening of the electronic band gap. Finally, we use density functional theory calculations to show that the organic MA cations reorientate to accommodate the large amplitude scissoring modes.

Probing structural and dynamic properties of MAPbCl3 hybrid perovskite using Mn2+ EPR

Hybrid methylammonium (MA) lead halide perovskites have emerged as materials exhibiting excellent photovoltaic performance related to their rich structural and dynamic properties. Here, we use multifrequency (X-, Q-, and W-band) electron paramagnetic resonance (EPR) spectroscopy of Mn2+ impurities in MAPbCl3 to probe the structural and dynamic properties of both the organic and inorganic sublattices of this compound. The temperature dependent continuous-wave (CW) EPR experiments reveal a sudden change of the Mn2+ spin Hamiltonian parameters at the phase transition to the ordered orthorhombic phase indicating its first-order character and significant slowing down of the MA cation reorientation. Pulsed EPR experiments are employed to measure the temperature dependences of the spin-lattice relaxation T1 and decoherence T2 times of the Mn2+ ions in the orthorhombic phase of MAPbCl3 revealing a coupling between the spin center and vibrations of the inorganic framework. Low-temperature electron spin echo envelope modulation (ESEEM) experiments of the protonated and deuterated MAPbCl3 analogues show the presence of quantum rotational tunneling of the ammonium groups, allowing to accurately probe their rotational energy landscape.

The dual nature of metal halide perovskites

Metal halide perovskites have brought about a disruptive shift in the field of third-generation photovoltaics. Their potential as remarkably efficient solar cell absorbers was first demonstrated in the beginning of the 2010s. However, right from their inception, persistent challenges have impeded the smooth adoption of this technology in the industry. These challenges encompass issues such as the lack of reproducibility in fabrication, limited mid- and long-term stability, and concerns over toxicity. Despite achieving record efficiencies that have outperformed even well-established technologies, such as polycrystalline silicon, these hurdles have hindered the seamless transition of this technology into industrial applications. In this Perspective, we discuss which of these challenges are rooted in the unique dual nature of metal halide perovskites, which simultaneously function as electronic and ionic semiconductors. This duality results in the intermingling of processes occurring at vastly different timescales, still complicating both their comprehensive investigation and the development of robust and dependable devices. Our discussion here undertakes a critical analysis of the field, addressing the current status of knowledge for devices based on halide perovskites in view of electronic and ionic conduction, the underlying models, and the challenges encountered when these devices are optoelectronically characterized. We place a distinct emphasis on the positive contributions that this area of research has not only made to the advancement of photovoltaics but also to the broader progress of solid-state physics and photoelectrochemistry.

Phase Transitions and Dynamics in Mixed Three- and Low-Dimensional Lead Halide Perovskites

Lead halide perovskites are extensively investigated as efficient solution-processable materials for photovoltaic applications. The greatest stability and performance of these compounds are achieved by mixing different ions at all three sites of the APbX3 structure. Despite the extensive use of mixed lead halide perovskites in photovoltaic devices, a detailed and systematic understanding of the mixing-induced effects on the structural and dynamic aspects of these materials is still lacking. The goal of this review is to summarize the current state of knowledge on mixing effects on the structural phase transitions, crystal symmetry, cation and lattice dynamics, and phase diagrams of three- and low-dimensional lead halide perovskites. This review analyzes different mixing recipes and ingredients providing a comprehensive picture of mixing effects and their relation to the attractive properties of these materials.

Dynamic Structural Evolution and Dual Emission Behavior in Hybrid Organic Lead Bromide Perovskites

The optoelectronic properties of organic lead halide perovskites (OLHPs) strongly depend on their underlying crystal symmetry and dynamics. Here, we exploit temperature-dependent synchrotron powder X-ray diffraction and temperature-dependent photoluminescence to investigate how the subtle structural changes happening in the pure and mixed A-site cation MA1-xFAxPbBr3 (x = 0, 0.5, and 1) systems influences their optoelectronic properties. Diffraction investigations reveal a cubic structure at high temperatures and tetragonal and orthorhombic structures with octahedral distortion at low temperatures. Steady state photoluminescence and time correlated single photon counting study reveals that the dual emission behavior of these OLHPs is due to the direct-indirect band formation. In the orthorhombic phase of MAPbBr3, the indirect band is dominated by self-trapped exciton (STE) emission due to the higher-order lattice distortions of PbBr6 octahedra. Our findings provide a comprehensive explanation of the dual emission behavior of OLHPs while also providing a rationale for previous experimental observations.

Unveiling of a puzzling dual ionic migration in lead- and iodide-deficient halide perovskites (d-HPs) and its impact on solar cell J-V curve hysteresis

Halide perovskite solar cells are characterized by a hysteresis between current-voltage (J-V) curves recorded on the reverse and on the forward scan directions, and the suppression of this phenomenon has focused great attention. In the present work, it is shown that a special family of 3D perovskites, that are rendered lead -and iodide- deficient (d-HPs) by incorporating large organic cations, are characterized by a large hysteresis. The strategy of passivating defects by K+, which has been successful in reducing the hysteresis of 3D perovskite perovskite solar cells, is inefficient with the d-HPs. By glow discharge optical emission spectroscopy (GD-OES), the existence of the classic iodide migration in these layers is unveiled, which is efficiently blocked by potassium cation insertion. However, it is also shown that it co-exists with the migration of the large organic cations characteristics of d-HPs which are not blocked by the alkali metal ion. The migration of those large cations is intrinsically linked to the special structure of the d-HP. It is suggested that it takes place through channels, present throughout the whole perovskite layer after the substitution of PbI+ units by the large cations, making this phenomenon intrinsic to the original structure of d-HPs.

Atomic Structure and Dynamics of Organic-Inorganic Hybrid Perovskite Formamidinium Lead Iodide

The atomic dynamic behaviors of formamidinium lead iodide [HC(NH2)2PbI3] are critical for understanding and improving photovoltaic performances. However, they remain unclear. Here, we investigate the structural phase transitions and the reorientation dynamics of the formamidinium cation [HC(NH2)2+, FA+] of FAPbI3 using neutron scattering techniques. Two structural phase transitions occur with decreasing temperature, from cubic to tetragonal phase at 285 K and then to another tetragonal at 140 K, accompanied by gradually frozen reorientation of FA cations. The nearly isotropic reorientation in the cubic phase is suppressed to reorientation motions involving a two-fold (C2) rotation along the N···N axis and a four-fold (C4) rotation along the C-H axis in the tetragonal phase, and eventually to local disordered motion as a partial C4 along the C-H axis in another tetragonal phase, thereby indicating an intimate interplay between lattice and orientation degrees of freedom in the hybrid perovskite materials. The present complete atomic structure and dynamics provide a solid standing point to understand and then improve photovoltaic properties of organic-inorganic hybrid perovskites in the future.

Cation Dynamics as Structure Explorer in Hybrid Perovskites-The Case of MAPbI3

Hybrid organic-inorganic perovskites exhibit remarkable potential as cost-effective and high-efficiency materials for photovoltaic applications. Their exceptional chemical tunability opens further routes for optimizing their optical and electronic properties through structural engineering. Nevertheless, the extraordinary softness of the lattice, stemming from its interconnected organic-inorganic composition, unveils formidable challenges in structural characterization. Here, by focusing on the quintessential methylammonium lead triiodide, MAPbI3, we combine first-principles modeling with high-resolution neutron scattering data to identify the key stationary points on its shallow potential energy landscape. This combined experimental and computational approach enables us to benchmark the performance of a collection of semilocal exchange-correlation functionals and to track the local distortions of the perovskite framework, hallmarked by the inelastic neutron scattering response of the organic cation. By conducting a thorough examination of structural distortions, we introduce the IKUR-PVP-1 structural data set. This data set contains nine mechanically stable structural models, each manifesting a distinct vibrational response. IKUR-PVP-1 constitutes a valuable resource for assessing thermal behavior in the low-temperature perovskite phase. In addition, it paves the way for the development of accurate force fields, enabling a comprehensive understanding of the interplay between the structure and dynamics in MAPbI3 and related hybrid perovskites.

Signatures of Polaron Dynamics in Photoexcited MAPbBr3 by Infrared Spectroscopy

Hybrid organic-inorganic perovskites (HOIPs) have attracted considerable attention in the past years as photoactive materials for low-cost, high-performance photovoltaics. Polaron formation through electron-phonon coupling has been recognized as the leading mechanism governing charge carrier transport and recombination in HOIPs. In this work, two types of MAPbBr3 film samples deposited on different substrates (transparent insulating SrTiO3 and a heterostructure mimicking a functioning photovoltaic cell) were photoexcited with above-bandgap radiation at 450 nm, and the effects of illumination on the sample were analyzed in the infrared region. The infrared absorbance detected at different powers of the photoexciting laser allowed us to obtain an estimate of the characteristic decay time of photoexcited polaron population of the order of 100-1000 ns. When focusing on the absorption features of the MA molecular cation in the region of the NH stretching modes, we observed the influence of hydrogen bonding and the effect of the polaron dynamics on the cation reorientation.

K-Ion Slides in Prussian Blue Analogues

We study the phenomenology of cooperative off-centering of K+ ions in potassiated Prussian blue analogues (PBAs). The principal distortion mechanism by which this off-centering occurs is termed a "K-ion slide", and its origin is shown to lie in the interaction between local electrostatic dipoles that couple through a combination of electrostatics and elastic strain. Using synchrotron powder X-ray diffraction measurements, we determine the crystal structures of a range of low-vacancy K2M[Fe(CN)6] PBAs (M = Ni, Co, Fe, Mn, Cd) and establish an empirical link between composition, temperature, and slide-distortion magnitude. Our results reflect the common underlying physics responsible for K-ion slides and their evolution with temperature and composition. Monte Carlo simulations driven by a simple model of dipolar interactions and strain coupling reproduce the general features of the experimental phase behavior. We discuss the implications of our study for optimizing the performance of PBA K-ion battery cathode materials and also its relevance to distortions in other, conceptually related, hybrid perovskites.

Thermal Transport Properties of Phonons in Halide Perovskites

Halide perovskites have emerged as promising candidates for various applications, such as photovoltaic, optoelectronic and thermoelectric applications. The knowledge of the thermal transport of halide perovskites is essential for enhancing the device performance for these applications and improving the understanding of heat transport in complicated material systems with atomic disorders. In this work, the current understanding of the experimentally and theoretically obtained thermal transport properties of halide perovskites is reviewed. This study comprehensively examines the reported thermal conductivity of methylammonium lead iodide, which is a prototype material, and provides theoretical frameworks for its lattice vibrational properties. The frameworks and discussions are extended to other halide perovskites and derivative structures. The implications for device applications, such as solar cells and thermoelectrics, are discussed.

Structural Dynamics Descriptors for Metal Halide Perovskites

Metal halide perovskites have shown extraordinary performance in solar energy conversion technologies. They have been classified as "soft semiconductors" due to their flexible corner-sharing octahedral networks and polymorphous nature. Understanding the local and average structures continues to be challenging for both modeling and experiments. Here, we report the quantitative analysis of structural dynamics in time and space from molecular dynamics simulations of perovskite crystals. The compact descriptors provided cover a wide variety of structural properties, including octahedral tilting and distortion, local lattice parameters, molecular orientations, as well as their spatial correlation. To validate our methods, we have trained a machine learning force field (MLFF) for methylammonium lead bromide (CH3NH3PbBr3) using an on-the-fly training approach with Gaussian process regression. The known stable phases are reproduced, and we find an additional symmetry-breaking effect in the cubic and tetragonal phases close to the phase-transition temperature. To test the implementation for large trajectories, we also apply it to 69,120 atom simulations for CsPbI3 based on an MLFF developed using the atomic cluster expansion formalism. The structural dynamics descriptors and Python toolkit are general to perovskites and readily transferable to more complex compositions.

Methylammonium Tetrel Halide Perovskite Ion Pairs and Their Dimers: The Interplay between the Hydrogen-, Pnictogen- and Tetrel-Bonding Interactions

The structural stability of the extensively studied organic-inorganic hybrid methylammonium tetrel halide perovskite semiconductors, MATtX₃ (MA = CH₃NH₃⁺; Tt = Ge, Sn, Pb; X = Cl, Br, I), arises as a result of non-covalent interactions between an organic cation (CH₃NH₃⁺) and an inorganic anion (TtX₃^-). However, the basic understanding of the underlying chemical bonding interactions in these systems that link the ionic moieties together in complex configurations is still limited. In this study, ion pair models constituting the organic and inorganic ions were regarded as the repeating units of periodic crystal systems and density functional theory simulations were performed to elucidate the nature of the non-covalent interactions between them. It is demonstrated that not only the charge-assisted N-H···X and C-H···X hydrogen bonds but also the C-N···X pnictogen bonds interact to stabilize the ion pairs and to define their geometries in the gas phase. Similar interactions are also responsible for the formation of crystalline MATtX₃ in the low-temperature phase, some of which have been delineated in previous studies. In contrast, the Tt···X tetrel bonding interactions, which are hidden as coordinate bonds in the crystals, play a vital role in holding the inorganic anionic moieties (TtX₃^-) together. We have demonstrated that each Tt in each [CH₃NH₃⁺•TtX₃^-] ion pair has the capacity to donate three tetrel (σ-hole) bonds to the halides of three nearest neighbor TtX₃^- units, thus causing the emergence of an infinite array of 3D TtX₆^4- octahedra in the crystalline phase. The TtX₄^4- octahedra are corner-shared to form cage-like inorganic frameworks that host the organic cation, leading to the formation of functional tetrel halide perovskite materials that have outstanding optoelectronic properties in the solid state. We harnessed the results using the quantum theory of atoms in molecules, natural bond orbital, molecular electrostatic surface potential and independent gradient models to validate these conclusions.

A moderate intensity ligand works best: a theoretical study on passivation effects of pyridine-based molecules for perovskite solar cells

Improving battery stability while maintaining high photoelectric conversion efficiency remains the bottleneck in the current development of perovskite solar cells (PSCs). Three π-conjugated pyridine-based molecules, pyridine (Py), bipyridine (Bpy), and terpyridine (Tpy), were adopted to passivate the PSCs in recent experiments (J. Chen, S.-G. Kim, X. Ren, H. S. Jung and N.-G. Park, J. Mater. Chem. A, 2019, 7, 4977-4987; J. Zhang, J. Duan, Q. Zhang, Q. Guo, F. Yan, X. Yang, Y. Duan and Q. Tang, Chem. Eng. J., 2022, 431, 134230), in which Bpy works best in terms of photovoltaic properties and moisture tolerance. In this work, based on density functional theory (DFT) calculations and ab initio molecular dynamics (AIMD) simulations, we demonstrate that Bpy displays the least structural fluctuation when adsorbed on the perovskite surface, enlarges the bandgap suppressing electron-hole recombination, and exhibits remarkable shielding effects against moisture. The appropriate anchoring ability of Bpy retains robust binding strength and preferable charge transfer ability compared to Py at the interfaces between the passivation molecules (PMs) and MAPbI₃. In contrast, although Tpy possesses the strongest charge-transfer capability, it introduces midgap states owing to intense electronegativity, providing additional pathways for nonradiative charge relaxation. Besides, Tpy triggers rapid diffusions of water and larger atomic fluctuations, destroying the structures of the perovskite through the removal of lead atoms. Our computational results not only rationalize the experimental observations but also provide valuable guidance at the atomic level to design novel PMs that endow PSCs with outstanding photovoltaic performance as well as stability against moisture.

Stabilizing Polar Domains in MAPbBr3 via the Hydrostatic Pressure-Induced Liquid Crystal-like Transition

Pressure-induced phases of MAPbBr₃ were investigated at room temperature in the range of 0-2.8 GPa by ab initio molecular dynamics. Two structural transitions at 0.7 GPa (cubic → cubic) and 1.1 GPa (cubic → tetragonal) involved both the inorganic host (lead bromide) and the organic guest (MA). MA dipoles behave like a liquid crystal undergoing isotropic → isotropic and isotropic → oblate nematic transitions as pressure confines their orientational fluctuations to a crystal plane. Beyond 1.1 GPa, the MA ions lie alternately along two orthogonal directions in the plane forming stacks perpendicular to it. However, the molecular dipoles are statically disordered, leading to stable polar and antipolar MA domains in each stack. H-Bond interactions, which primarily mediate host-guest coupling, facilitate the static disordering of MA dipoles. Interestingly, high pressures suppress CH₃ torsional motion, emphasizing the role of C-H···Br bonds in the transitions.

Origin of Ultralow Thermal Conductivity in Metal Halide Perovskites

Resulting from their remarkable structure-property relationships, metal halide perovskites have garnered tremendous attention in recent years for a plethora of applications. For instance, their ultralow thermal conductivities make them promising candidates for thermoelectric and thermal barrier coating applications. It is widely accepted that the "guest" cations inside the metal halide framework act as "rattlers", which gives rise to strong intrinsic phonon resistances, thus explaining the structure-property relationship dictating their ultralow thermal conductivities. In contrast, through systematic atomistic simulations, we show that this conventionally accepted "rattling" behavior is not the mechanism dictating the ultralow thermal conductivities in metal halide perovskites. Instead, we show that the ultralow thermal conductivities in these materials mainly originate from the strongly anharmonic and mechanically soft metal halide framework. By comparing the thermal transport properties of the prototypical fully inorganic CsPbI₃ and an empty PbI₆ framework, we show that the addition of Cs⁺ ions inside the nanocages leads to an enhancement in thermal conductivity through vibrational hardening of the framework. Our extensive spectral energy density calculations show that the Cs⁺ ions have well-defined phase relations with the lattice dynamics of the "host" framework resulting in additional pathways for heat conduction, which is in disagreement with the description of the individual "rattling" of guests inside the framework that has been widely assumed to dictate their ultralow thermal conductivities. Furthermore, we show that an efficient strategy to control the heat transfer efficacy in these materials is through the manipulation of the framework anharmonicity achieved via strain and octahedral tilting. Our work provides the fundamental insights into the lattice dynamics that dictate heat transfer in these novel materials, which will ultimately help guide their further advancement in the next-generation of electronics such as in thermoelectric and photovoltaic applications.

Comparing the Cubic and Tetragonal Phases of MAPbI3 at Room Temperature

Stability and maintenance of the crystal structure are the main drawbacks of the application of organic-inorganic perovskites in photovoltaic devices. The ΔT = 62 K robust shift of the structural phase transition observed here allows us to conduct a comprehensive study at room temperature of the tetragonal versus cubic phase on MAPbI₃. The absence of the shift in the cubic transition for all-inorganic CsPbI₃ samples confirms the importance of both orientation and dynamics of the organic cations. Our results provide a unique opportunity to evaluate the physical properties of both cubic and tetragonal phases of MAPbI₃ at the same temperature, eliminating different phonon effects as possible causes for different properties. Besides higher electrical resistivity, the perovskite cubic phase presents a faster charge carrier lifetime than the tetragonal phase and partial PL quenching, pointing toward increased trap-assisted nonradiative recombination. The light absorption coefficient in the cubic phase is larger than the absorption in the tetragonal phase in the green region.

Rotational Dynamics of Organic Cations in Formamidinium Lead Iodide Perovskites

We report results from quasi-elastic neutron scattering studies on the rotational dynamics of formamidinium (HC[NH₂]₂⁺, FA) and methylammonium (CH₃NH₃⁺, MA) cations in FA_1-xMA_xPbI₃ with x = 0 and 0.4 and compare it to the dynamics in MAPbI₃. For FAPbI₃, the FA cation dynamics evolve from nearly isotropic rotations in the high-temperature (T > 285 K) cubic phase through reorientations between preferred orientations in the intermediate-temperature tetragonal phase (140 K < T ⩽ 285 K) to an even more complex dynamics, due to a disordered arrangement of the FA cations, in the low-temperature tetragonal phase (T ⩽ 140 K). For FA_0.6MA_0.4PbI₃, the dynamics of the respective organic cations evolve from a relatively similar behavior to FAPbI₃ and MAPbI₃ at room temperature to a different behavior in the lower-temperature phases where the MA cation dynamics are a factor of 50 faster as compared to those of MAPbI₃. This insight suggests that tuning the MA/FA cation ratio may be a promising approach to tailoring the dynamics and, in effect, optical properties of FA_1-xMA_xPbI₃.

Cubic or Not Cubic? Combined Experimental and Computational Investigation of the Short-Range Order of Tin Halide Perovskites

Tin-based metal halide perovskites with a composition of ASnX₃ (where A= MA or FA and X = I or Br) have been investigated by means of X-ray total scattering techniques coupled to pair distribution function (PDF) analysis. These studies revealed that that none of the four perovskites has a cubic symmetry at the local scale and that a degree of increasing distortion is always present, in particular when the cation size is increased, i.e., from MA to FA, and the hardness of the anion is increased, i.e., from Br^- to I^-. Electronic structure calculations provided good agreement with experimental band gaps for the four perovskites when local dynamical distortions were included in the calculations. The averaged structure obtained from molecular dynamics simulations was consistent with experimental local structures determined via X-ray PDF, thus highlighting the robustness of computational modeling and strengthening the correlation between experimental and computational results.

2D Organic Materials: Status and Challenges

In the past few decades, 2D layer materials have gradually become a central focus in materials science owing to their uniquely layered structural qualities and good optoelectronic properties. However, in the development of 2D materials, several disadvantages, such as limited types of materials and the inability to synthesize large-scale materials, severely confine their application. Therefore, further exploration of new materials and preparation methods is necessary to meet technological developmental needs. Organic molecular materials have the advantage of being customizable. Therefore, if organic molecular and 2D materials are combined, the resulting 2D organic materials would have excellent optical and electrical properties. In addition, through this combination, the free design and large-scale synthesis of 2D materials can be realized in principle. Furthermore, 2D organic materials exhibit excellent properties and unique functionalities along with great potential for developing sensors, biomedicine, and electronics. In this review, 2D organic materials are divided into five categories. The preparation methods and material properties of each class of materials are also described in detail. Notably, to comprehensively understand each material's advantages, the latest research applications for each material are presented in detail and summarized. Finally, the future development and application prospects of 2D organic materials are briefly discussed.

How cation nature controls the bandgap and bulk Rashba splitting of halide perovskites

Because of instability issues presented by metal halide perovskites based on methylammonium (MA), its replacement to Cs $$ \mathrm{Cs} $$ has emerged as an alternative to improve the materials' durability. However, the impact of this replacement on electronic properties, especially gap energy and bulk Rashba splitting remains unclear since electrostatic interactions from organic cations can play a crucial role. Through first-principles calculations, we investigated how organic/inorganic cations impact the electronic properties of MAPbI 3 $$ {\mathrm{MAPbI}}_3 $$ and CsPbI 3 $$ {\mathrm{CsPbI}}_3 $$ perovskites. Although at high temperatures the organic cation can assume spherical-like configurations due to its rotation into the cages, our results provide a complete electronic mechanism to show, from a chemical perspective based on ab initio calculations at 0 K $$ 0\ \mathrm{K} $$ , how the MA $$ \mathrm{MA} $$ dipoles suppression can reduce the MAPbI 3 $$ {\mathrm{MAPbI}}_3 $$ gap energy by promoting a degeneracy breaking in the electronic states from the PbI 3 $$ {\mathrm{PbI}}_3 $$ framework, while the dipole moment reinforcement is crucial to align theory ↔ $$ \leftrightarrow $$ experiment, increasing the bulk Rashba splitting through higher Pb $$ \mathrm{Pb} $$ off-centering motifs. The lack of permanent dipole moment in Cs $$ \mathrm{Cs} $$ results in CsPbI 3 $$ {\mathrm{CsPbI}}_3 $$ polymorphs with a pronounced Pb $$ \mathrm{Pb} $$ on-centering-like feature, which causes suppression in their respective bulk Rashba effect.

CsPbBr3-DMSO merged perovskite micro-bricks for efficient X-ray detection

Inorganic perovskite wafers with good stability and adjustable sizes are promising in X-ray detection but the high synthetic temperature is a hindrance. Herein, dimethyl sulfoxide (DMSO) is used to prepare the CsPbBr3 micro-bricks powder at room temperature. The CsPbBr3 powder has a cubic shape with few crystal defects, small charge trap density, and high crystallinity. A trace amount of DMSO attaches to the surface of the CsPbBr3 micro-bricks via Pb-O bonding, forming the CsPbBr3-DMSO adduct. During hot isostatic processing, the released DMSO vapor merges the CsPbBr3 micro-bricks, producing a compact and dense CsPbBr3 wafer with minimized grain boundaries and excellent charge transport properties. The CsPbBr3 wafer shows a large mobility-lifetime (μτ) product of 5.16 × 10-4 cm2·V-1, high sensitivity of 14,430 μC·Gyair-1·cm-2, low detection limit of 564 nGyair·s-1, as well as robust stability in X-ray detection. The results reveal a novel strategy with immense practical potential pertaining to high-contrast X-ray detection.

Electronic Supplementary Material

Supplementary material (further details of the characterization, SEM images, AFM images, KPFM images, schematic illustration, XRD patterns, XPS spectra, FTIR spectra, UPS spectra, and stability tests) is available in the online version of this article at 10.1007/s12274-023-5487-3.

Piezocatalytic Techniques in Environmental Remediation

As a consequence of rapid industrialization throughout the world, various environmental pollutants have begun to accumulate in water, air, and soil. This endangers the ecological environment of the earth, and environmental remediation has become an immediate priority. Among various environmental remediation techniques, piezocatalytic techniques, which uniquely take advantage of the piezoelectric effect, have attracted much attention. Piezoelectric effects allow pollutant degradation directly, while also enhancing photocatalysis by reducing the recombination of photogenerated carriers. In this Review, we provide a comprehensive summary of recent developments in piezocatalytic techniques for environmental remediation. The origin of the piezoelectric effect as well as classification of piezoelectric materials and their application in environmental remediation are systematically summarized. We also analyze the potential underlying mechanisms. Finally, urgent problems and the future development of piezocatalytic techniques are discussed.

A Complete Picture of Cation Dynamics in Hybrid Perovskite Materials from Solid-State NMR Spectroscopy

The organic cations in hybrid organic-inorganic perovskites rotate rapidly inside the cuboctahedral cavities formed by the inorganic lattice, influencing optoelectronic properties. Here, we provide a complete quantitative picture of cation dynamics for formamidinium-based perovskites and mixed-cation compositions, which are the most widely used and promising absorber layers for perovskite solar cells today. We use 2H and 14N quadrupolar solid-state NMR relaxometry under magic-angle spinning to determine the activation energy (Ea) and correlation time (τc) at room temperature for rotation about each principal axis of a series of organic cations. Specifically, we investigate methylammonium (MA+), formamidinium (FA+), and guanidinium (GUA+) cations in current state-of-the-art single- and multi-cation perovskite compositions. We find that MA+, FA+, and GUA+ all have at least one component of rotation that occurs on the picosecond timescale at room temperature, with MA+ and GUA+ also exhibiting faster and slower components, respectively. The cation dynamics depend on the symmetry of the inorganic lattice but are found to be insensitive to the degree of cation substitution. In particular, the FA+ rotation is invariant across all compositions studied here, when sufficiently above the phase transition temperature. We further identify an unusual relaxation mechanism for the 2H of MA+ in mechanosynthesized FAxMA1-xPbI3, which was found to result from physical diffusion to paramagnetic defects. This precise picture of cation dynamics will enable better understanding of the relationship between the organic cations and the optoelectronic properties of perovskites, guiding the design principles for more efficient perovskite solar cells in the future.

The Effect of Short Chain Carboxylic Acids as Additives on the Crystallization of Methylammonium Lead Triiodide (MAPI)

Due to their exceptional properties, the study of hybrid perovskite (HyP) structures and applications dominate current photovoltaic prospects. Methylammonium lead tri-iodide perovskite (MAPI) is the model compound of the HyP class of materials that, in a few years, achieved, in photovoltaics, a power conversion efficiency of 25%. The attention on HyP has recently moved to large single crystals as emerging candidates for photovoltaic application because of their improved stability and optoelectronic properties compared to polycrystalline films. To control the quality and symmetry of the large MAPI single crystals, we proposed an original method that consisted of adding short-chain carboxylic acids to the inverse temperature crystallization (ICT) of MAPI in γ-butyrolactone (GBL). The crystals were characterized by single-crystal X-ray diffraction (SC-XRD), X-ray powder diffraction (XRPD) and Raman spectroscopy. Based on SC-XRD analysis, MAPI crystals grown using acetic and trifluoroacetic acids adopt a tetragonal symmetry “I4cm”. MAPI grown in the presence of formic acid turned out to crystallize in the orthorhombic “Fmmm” space group demonstrating the acid’s effect on the crystallization of MAPI.

The effect of caesium alloying on the ultrafast structural dynamics of hybrid organic-inorganic halide perovskites

Hybrid inorganic-organic perovskites have attracted considerable attention over recent years as promising processable electronic materials. In particular, the rich structural dynamics of these 'soft' materials has become a subject of investigation and debate due to their direct influence on the perovskites' optoelectronic properties. Significant effort has focused on understanding the role and behaviour of the organic cations within the perovskite, as their rotational dynamics may be linked to material stability, heterogeneity and performance in (opto)electronic devices. To this end, we use two-dimensional IR spectroscopy (2DIR) to understand the effect of partial caesium alloying on the rotational dynamics of the methylammonium cation in the archetypal hybrid perovskite CH₃NH₃PbI₃. We find that caesium incorporation primarily inhibits the slower 'reorientational jump' modes of the organic cation, whilst a smaller effect on the fast 'wobbling time' may be due to distortions and rigidisation of the inorganic cuboctahedral cage. 2DIR centre-line-slope analysis further reveals that while static disorder increases with caesium substitution, the dynamic disorder (reflected in the phase memory of the N-H stretching mode of methylammonium) is largely independent of caesium addition. Our results contribute to the development of a unified model of cation dynamics within organohalide perovskites.

[Methylhydrazinium]2PbCl4, a Two-Dimensional Perovskite with Polar and Modulated Phases

Two-dimensional (2D) lead halide perovskites are a family of materials at the heart of solar cell, light-emitting diode, and photodetector technologies. This perspective leads to a number of synthetic efforts toward materials of this class, including those with prescribed polar architectures. The methylhydrazinium (MHy⁺) cation was recently presumed to have an unusual capacity to generate non-centrosymmetric perovskite phases, despite its intrinsically nonchiral structure. Here, we witness this effect once again in the case of the Ruddlesden–Popper perovskite phase of formula MHy₂PbCl₄. MHy₂PbCl₄ features three temperature-dependent crystal phases, with two first-order phase transitions at T₁ = 338.2 K (331.8 K) and T₂ = 224.0 K (205.2 K) observed in the heating (cooling) modes, respectively. Observed transitions involve a transformation from high-temperature orthorhombic phase I, with the centrosymmetric space group Pmmn, through the room-temperature modulated phase II, with the average structure being isostructural to I, to the low-temperature monoclinic phase III, with non-centrosymmetric space group P2₁. The intermediate phase II is a rare example of a modulated structure in 2D perovskites, with Pmmn(00γ)s00 superspace symmetry and modulation vector q ≅ 0.25c*. MHy₂PbCl₄ beats the previous record of MHy₂PbBr₄ in terms of the shortest inorganic interlayer distance in 2D perovskites (8.79 Å at 350 K vs 8.66 Å at 295 K, respectively). The characteristics of phase transitions are explored with differential scanning calorimetry, dielectric, and Raman spectroscopies. The non-centrosymmetry of phase III is confirmed with second harmonic generation (SHG) measurements, and polarity is demonstrated by the pyroelectric effect. MHy₂PbCl₄ also exhibits thermochromism, with the photoluminescence (PL) color changing from purplish-blue at 80 K to bluish-green at 230 K. The demonstration of polar characteristics for one more member of the methylhydrazinium perovskites settles a debate about whether this approach can present value for the crystal engineering of acentric solids similar to that which was recently adopted by a so-called fluorine substitution effect.

The properties of an unknown halide analogue of extant two-dimensional methylhydrazinium perovskites of formula MHy₂PbCl₄ were explored. A multitechnique investigation of the structural, polar, dielectric, nonlinear, and linear optical properties of all crystal phases of MHy₂PbCl₄ forms the basis of the present contribution.

Degradation and Self-Healing in Perovskite Solar Cells

Organic-inorganic halide perovskites are well-known for their unique self-healing ability. In the presence of strong external stimuli, such as light, temperature, and moisture, high-energy defects are created which can be healed by removing the perovskite from the degradation source. This self-healing ability has been showcased in devices with recoverable performance and day-and-night cycling operation to dramatically extend the device lifetime and even mechanical durability. However, to date, the mechanistic details and theory around this captivating trait are sparse and convoluted by the complex nature of perovskites. With a clear understanding of the intrinsic self-healing property, perovskite solar cells with extended lifetimes and durability can be designed to realize the large-scale commercialization of perovskite solar cells. Here, we spotlight the relevant degradation and self-healing literature and then propose design strategies to help conceptualize future research.

Sub-angstrom noninvasive imaging of atomic arrangement in 2D hybrid perovskites

Noninvasive imaging of the atomic arrangement in two-dimensional (2D) Ruddlesden-Popper hybrid perovskites (RPPs) is challenging because of the insulating nature and softness of the organic layers. Here, we demonstrate a sub-angstrom resolution imaging of both soft organic layers and inorganic framework in a prototypical 2D lead-halide RPP crystal via combined tip-functionalized scanning tunneling microscopy (STM) and noncontact atomic force microscopy (ncAFM) corroborated by theoretical simulations. STM measurements unveil the atomic reconstruction of the inorganic lead-halide lattice and overall twin-domain composition of the RPP crystal, while ncAFM measurements with a CO-tip enable nonperturbative visualization of the cooperative reordering of surface organic cations driven by their hydrogen bonding interactions with the inorganic lattice. Moreover, such a joint technique also allows for the atomic-scale imaging of the electrostatic potential variation across the twin-domain walls, revealing alternating quasi-1D electron and hole channels at neighboring twin boundaries, which may influence in-plane exciton transport and dissociation.

Physical Fields Manipulation for High-Performance Perovskite Photovoltaics

With the efforts of researchers from all over the world, metal halide perovskite solar cells (PSCs) have been booming rapidly in recent years. Generally, perovskite films are sensitive to surrounding conditions and will be changed under the action of physical fields, resulting in lattice distortion, degradation, ion migration, and so on. In this review, the progress of physical fields manipulation in PSCs, including the electric field, magnetic field, light field, stress field, and thermal field are reviewed. On this basis, the influences of these fields on PSCs are summarized and prospected. Finally, challenges and prospective research directions on how to make better use of external-fields while minimizing the unnecessary and disruptive impacts on commercial PSCs with high-efficiency and steady output are proposed.

Rethinking the A cation in halide perovskites

The A cation in ABX₃ organic-inorganic lead halide perovskites (OLHPs) was conventionally believed to hardly affect their optoelectronic properties. However, more recent developments have unraveled the critical role of the A cation in the regulation of the physicochemical and optoelectronic properties of OLHPs. We review the important breakthroughs enabled by the versatility of the A cation and highlight potential opportunities and unanswered questions related to the A cation in OLHPs.

The Insolubility Problem of Organic Hole-Transport Materials Solved by Solvothermal Technology: Toward Solution-Processable Perovskite Solar Cells

Generally, the high efficiency of solution-processable perovskite solar cells (PSCs) comes at the expense of using expensive organic matters as a hole-transport material (HTM). Although intense efforts have tried to use commercially available and low-cost macrocyclic molecules as HTM candidates, they still face two enormous challenges: poor solubility and inherent instability. Here, solvothermal treatment for old and insoluble HTMs (phthalocyanine (Pc) and its derivatives) has been proposed, which is unusual due to the occurrence of solubilization for insoluble precursors induced by the carbonization of the dissolved part. Since the macrocyclic structure still exists, the as-prepared new-type carbon dots not only retain the capacity of hole transfer but serve as an effective passivation additive. Synergy makes the all-air-processed carbon-based PSCs (CH₃NH₃PbI₃) fabricated with carbon dots achieve a decent power conversion efficiency of 13.7%. Importantly, organics have undergone solvothermal treatment, completely breaking through the instability bottleneck, which exists in the long-term operation of PSCs. The universality of this methodology will usher exploration into other low-cost insoluble organics and drastically enhance the high-performance cost ratio of PSC equipment.

Toward stable lead halide perovskite solar cells: A knob on the A/X sites components

Hybrid lead halide ABX3 perovskite solar cells (PSCs) have emerged as a strong competitor to the traditional solar cells with a certified power conversion efficiency beyond 25% and other remarkable features such as light weight, solution processability, and low manufacturing cost. Further development on the efficiency and stability brings forth increasing attention in the component regulation, such as partial or entire substitution of A/B/X sites by alternative elements with similar size. However, the relationships between composition, property, and performance are poorly understood. Here, the instability of PSCs from the photon-, moisture-, thermal-, and mechanical-induced degradation was first summarized and discussed. In addition, the component regulation from the A/X sites is highlighted from the aspects of band level alignment, charge-carrier dynamics, ion migration, crystallization behavior, residual strain, stoichiometry, and dimensionality control. Finally, the perspectives and future outlooks are highlighted to guide the rational design and practical application of PSCs.

Antiperovskite Electrolytes for Solid-State Batteries

Solid-state batteries have fascinated the research community over the past decade, largely due to their improved safety properties and potential for high-energy density. Searching for fast ion conductors with sufficient electrochemical and chemical stabilities is at the heart of solid-state battery research and applications. Recently, significant progress has been made in solid-state electrolyte development. Sulfide-, oxide-, and halide-based electrolytes have been able to achieve high ionic conductivities of more than 10^-3 S/cm at room temperature, which are comparable to liquid-based electrolytes. However, their stability toward Li metal anodes poses significant challenges for these electrolytes. The existence of non-Li cations that can be reduced by Li metal in these electrolytes hinders the application of Li anode and therefore poses an obstacle toward achieving high-energy density. The finding of antiperovskites as ionic conductors in recent years has demonstrated a new and exciting solution. These materials, mainly constructed from Li (or Na), O, and Cl (or Br), are lightweight and electrochemically stable toward metallic Li and possess promising ionic conductivity. Because of the structural flexibility and tunability, antiperovskite electrolytes are excellent candidates for solid-state battery applications, and researchers are still exploring the relationship between their structure and ion diffusion behavior. Herein, the recent progress of antiperovskites for solid-state batteries is reviewed, and the strategies to tune the ionic conductivity by structural manipulation are summarized. Major challenges and future directions are discussed to facilitate the development of antiperovskite-based solid-state batteries.

Recent Advances in Synthesis, Properties, and Applications of Metal Halide Perovskite Nanocrystals/Polymer Nanocomposites

Metal halide perovskite nanocrystals (PNCs) have recently garnered tremendous research interest due to their unique optoelectronic properties and promising applications in photovoltaics and optoelectronics. Metal halide PNCs can be combined with polymers to create nanocomposites that carry an array of advantageous characteristics. The polymer matrix can bestow stability, stretchability, and solution-processability while the PNCs maintain their size-, shape- and composition-dependent optoelectronic properties. As such, these nanocomposites possess great promise for next-generation displays, lighting, sensing, biomedical technologies, and energy conversion. The recent advances in metal halide PNC/polymer nanocomposites are summarized here. First, a variety of synthetic strategies for crafting PNC/polymer nanocomposites are discussed. Second, their array of intriguing properties is examined. Third, the broad range of applications of PNC/polymer nanocomposites is highlighted, including light-emitting diodes (LEDs), lasers, and scintillators. Finally, an outlook on future research directions and challenges in this rapidly evolving field are presented.

Mixing of Azetidinium in Formamidinium Tin Triiodide Perovskite Solar Cells for Enhanced Photovoltaic Performance and High Stability in Air

Overcoming the issue of the stability of tin-based perovskites is a major challenge for the commercial development of lead-free perovskite solar cells. To attack this problem, a new organic cation, azetidinium (AZ), is incorporated into the crystal structure of formamidinium tin triiodide (FASnI₃ ) to form the mixed-cation perovskite AZ_x FA_1-x SnI₃ . As AZ has a similar size to FA but a larger dipole moment, hybrid AZ_x FA_1-x SnI₃ films exhibit variation in optical and electronic properties on increasing the proportion of AZ. Trifluoromethylbenzene (CF₃ C₆ H₅ ) serves as antisolvent to fabricate smooth and uniform perovskite films for the devices with an inverted planar heterojunction structure. The device performance is optimized to produce the greatest efficiency at x=0.15 (AZ15), for which a power conversion efficiency of 9.6 % is obtained when the unencapsulated AZ15 device is stored in air for 100 h. Moreover, the device retains 90 % of its initial efficiency for over 15 days. The significant performance and stability of this device reveal that the concept of mixed cations is a promising approach to stabilize tin-based perovskite solar cells for future commercialization.

Atomic Level Insights into Metal Halide Perovskite Materials by Scanning Tunneling Microscopy and Spectroscopy

Metal halide perovskite materials (MHPMs) have attracted significant attention because of their superior optoelectronic properties and versatile applications. The power conversion efficiency of MHPM solar cells (PSCs) has skyrocketed to 25.5 %. Although the performance of PSCs is already competitive, several important challenges still need to be solved to realize commercial applications. A thorough understanding of surface atomic structures and structure-property relationships is at the heart of these remaining issues. Scanning tunneling microscopy (STM) and spectroscopy (STS) can be used to characterize the surface properties of MHPMs, which can offer crucial insights into MHPMs at the atomic scale. This Review summarizes recent progress in STM and STS studies on MHPMs, with a focus on the surface properties. We provide understanding from the comparative perspective of several different MHPMs. We also highlight a series of novel phenomena observed by STM and STS. Finally, we outline a few research topics of primary importance for future studies.

Water and oxygen co-induced microstructure relaxation and evolution in CH3NH3PbI3

Owing to perovskite possessing the outstanding optoelectronic properties, perovskite-based solar cells show prominent performance. The stability of perovskite-based solar cells hampers the progress of commercialization, so it is important to understand the microstructure mechanism of perovskite degradation under the humidity and oxygen environmental conditions. In this study, a meaningful Debye-type dielectric relaxation was observed under water vapor and oxygen co-treatment conditions. Interestingly, the relaxation was not observed under water vapor or oxygen treatment individually. This new dielectric relaxation is identified as a direct result of dipole jump, and its activation energy was measured to be 630 ± 6 meV. According to photoelectron spectroscopy and ¹³C nuclear magnetic resonance data, we suggest that the dipoles are formed by CH₃NH₃⁺ (MA⁺) and superoxide (O₂^-), which originate from the distorted crystal lattice and water vapor-weakened hydrogen bonds of Pb-I cages. In addition, the activation energy fitted by dielectric relaxation might be the energy of ion migration. This study contributes to understanding the mechanism of perovskite degradation from the view of microstructure relaxation and evolution, and also provides a method for the analysis of ion migration energy.

Exploring Transport Behavior in Hybrid Perovskites Solar Cells via Machine Learning Analysis of Environmental-Dependent Impedance Spectroscopy

Hybrid organic-inorganic perovskites are one of the promising candidates for the next-generation semiconductors due to their superlative optoelectronic properties. However, one of the limiting factors for potential applications is their chemical and structural instability in different environments. Herein, the stability of (FAPbI3 )0.85 (MAPbBr3 )0.15 perovskite solar cell is explored in different atmospheres using impedance spectroscopy. An equivalent circuit model and distribution of relaxation times (DRTs) are used to effectively analyze impedance spectra. DRT is further analyzed via machine learning workflow based on the non-negative matrix factorization of reconstructed relaxation time spectra. This exploration provides the interplay of charge transport dynamics and recombination processes under environment stimuli and illumination. The results reveal that in the dark, oxygen atmosphere induces an increased hole concentration with less ionic character while ionic motion is dominant under ambient air. Under 1 Sun illumination, the environment-dependent impedance responses show a more striking effect compared with dark conditions. In this case, the increased transport resistance observed under oxygen atmosphere in equivalent circuit analysis arises due to interruption of photogenerated hole carriers. The results not only shed light on elucidating transport mechanisms of perovskite solar cells in different environments but also offer an effective interpretation of impedance responses.

Giant Bulk Photostriction of Lead Halide Perovskite Single Crystals

It is well known that the lattice structure for a crystal can be manipulated through mechanical strain, temperature, an electric field, a magnetic field, and light. In the past, the photostriction commonly occurs at the surface and the bulk photostriction is very small in most semiconductors. Here, the 532 nm laser can excite the excess electron-hole pairs in the surface layer and consequently these carriers diffuse in the millimeter-thick MAPbBr_3-xI_x crystal and introduce a giant bulk photostriction of 0.17, 0.28, and 0.35% for the 0.5 mm-thick MAPbBr_3-xI_x single crystals at x = 0, 1, and 2, respectively. Furthermore, the displacement of each crystal linearly increases from hundreds of picometers to several micrometers when the light intensity increases from about 0.2 to 536 mW/cm². Since both the maximum strain and the displacement accuracy are as good as those of PZT ceramics used in piezoelectric actuators, these crystals can be used in light-driven actuators for precise positioning.

A Microstructural Analysis of 2D Halide Perovskites: Stability and Functionality

Recent observations have demonstrated that the photoelectric conversion properties of perovskite materials are intimately related to the presence of superlattice structures and other unusual nanoscale features in them. The low-dimensional or mixed-dimensional halide perovskite families are found to be more efficient materials for device application than three-dimensional halide perovskites. The emergence of perovskite solar cells has revolutionized the solar cell industry because of their flexible architecture and rapidly increased efficiency. Tuning the dielectric constant and charge separation are the main objectives in designing a photovoltaic device that can be explored using the two-dimensional perovskite family. Thus, revisiting the fundamental properties of perovskite crystals could reveal further possibilities for recognizing these improvements toward device functionality. In this context, this review discusses the material properties of two-dimensional halide perovskites and related optoelectronic devices, aiming particularly for solar cell applications.

Halide Perovskites: A New Era of Solution-Processed Electronics

Organic-inorganic mixed halide perovskites have emerged as an excellent class of materials with a unique combination of optoelectronic properties, suitable for a plethora of applications ranging from solar cells to light-emitting diodes and photoelectrochemical devices. Recent works have showcased hybrid perovskites for electronic applications through improvements in materials design, processing, and device stability. Herein, a comprehensive up-to-date review is presented on hybrid perovskite electronics with a focus on transistors and memories. These applications are supported by the fundamental material properties of hybrid perovskite semiconductors such as tunable bandgap, ambipolar charge transport, reasonable mobility, defect characteristics, and solution processability, which are highlighted first. Then, recent progresses on perovskite-based transistors are reviewed, covering aspects of fabrication process, patterning techniques, contact engineering, 2D versus 3D material selection, and device performance. Furthermore, applications of perovskites in nonvolatile memories and artificial synaptic devices are presented. The ambient instability of hybrid perovskites and the strategies to tackle this bottleneck are also discussed. Finally, an outlook and opportunities to develop perovskite-based electronics as a competitive and feasible technology are highlighted.

Mechanisms for collective inversion-symmetry breaking in dabconium perovskite ferroelectrics

Dabconium hybrid perovskites include a number of recently-discovered ferroelectric phases with large spontaneous polarisations. The origin of ferroelectric response has been rationalised in general terms in the context of hydrogen bonding, covalency, and strain coupling. Here we use a combination of simple theory, Monte Carlo simulations, and density functional theory calculations to assess the ability of these microscopic ingredients-together with the always-present through-space dipolar coupling-to account for the emergence of polarisation in these particular systems whilst not in other hybrid perovskites. Our key result is that the combination of A-site polarity, preferred orientation along 〈111〉 directions, and ferroelastic strain coupling drives precisely the ferroelectric transition observed experimentally. We rationalise the absence of polarisation in many hybrid perovskites, and arrive at a set of design rules for generating FE examples beyond the dabconium family alone.