Hyperpolarization moves S4 sensors inward to open MVP, a methanococcal voltage-gated potassium channel

Exploring Flexibility and Folding Patterns Throughout Time in Voltage Sensors

The voltage-sensing domain (VSD) is a module capable of responding to changes in the membrane potential through conformational changes and facilitating electromechanical coupling to open a pore gate, activate proton permeation pathways, or promote enzymatic activity in some membrane-anchored phosphatases. To carry out these functions, this module acts cooperatively through conformational changes. The VSD is formed by four transmembrane segments (S1-S4) but the S4 segment is critical since it carries positively charged residues, mainly Arg or Lys, which require an aqueous environment for its proper function. The discovery of this module in voltage-gated ion channels (VGICs), proton channels (Hv1), and voltage sensor-containing phosphatases (VSPs) has expanded our understanding of the principle of modularity in the voltage-sensing mechanism of these proteins. Here, by sequence comparison and the evaluation of the relationship between sequence composition, intrinsic flexibility, and structural analysis in 14 selected representatives of these three major protein groups, we report five interesting differences in the folding patterns of the VSD both in prokaryotes and eukaryotes. Our main findings indicate that this module is highly conserved throughout the evolutionary scale, however: (1) segments S1 to S3 in eukaryotes are significantly more hydrophobic than those present in prokaryotes; (2) the S4 segment has retained its hydrophilic character; (3) in eukaryotes the extramembranous linkers are significantly larger and more flexible in comparison with those present in prokaryotes; (4) the sensors present in the kHv1 proton channel and the ciVSP phosphatase, both of eukaryotic origin, exhibit relationships of flexibility and folding patterns very close to the typical ones found in prokaryotic voltage sensors; and (5) archaeal channels KvAP and MVP have flexibility profiles which are clearly contrasting in the S3-S4 region, which could explain their divergent activation mechanisms. Finally, to elucidate the obscure origins of this module, we show further evidence for a possible connection between voltage sensors and TolQ proteins.

Electromechanical coupling in the hyperpolarization-activated K+ channel KAT1

Voltage-gated potassium (K_v) channels orchestrate electrical signaling and control cell volume by gating in response to either membrane depolarization or hyperpolarization. Yet, while all voltage-sensing domains transduce transmembrane electric field changes by a common mechanism involving the outward or inward translocation of gating charges^1–3, the general determinants of channel gating polarity remain poorly understood⁴. Here, we suggest a molecular mechanism for electromechanical coupling and gating polarity in non-domain-swapped K_v channels based on the cryo-EM structure of KAT1, the hyperpolarization-activated K_v channel from Arabidopsis thaliana. KAT1 displays a depolarized voltage sensor, which interacts with a closed pore domain directly via two interfaces and indirectly via an intercalated phospholipid. Functional evaluation of KAT1 structure-guided mutants at the sensor-pore interfaces suggests a mechanism in which direct interaction between the sensor and C-linker hairpin in the adjacent pore subunit is the primary determinant of gating polarity. We suggest that a ~5–7 Å inward motion of the S4 sensor helix can underlie a direct-coupling mechanism, driving a conformational reorientation of the C-linker and ultimately opening the activation gate formed by the S6 intracellular bundle. This direct-coupling mechanism contrasts with allosteric mechanisms proposed for hyperpolarization-activated cyclic nucleotide-gated (HCN) channels⁵, and may represent an unexpected link between depolarization and hyperpolarization-activated channels.

Combining in Vitro Folding with Cell Free Protein Synthesis for Membrane Protein Expression

Cell free protein synthesis (CFPS) has emerged as a promising methodology for protein expression. While polypeptide production is very reliable and efficient using CFPS, the correct cotranslational folding of membrane proteins during CFPS is still a challenge. In this contribution, we describe a two-step protocol in which the integral membrane protein is initially expressed by CFPS as a precipitate followed by an in vitro folding procedure using lipid vesicles for converting the protein precipitate to the correctly folded protein. We demonstrate the feasibility of using this approach for the K(+) channels KcsA and MVP and the amino acid transporter LeuT. We determine the crystal structure of the KcsA channel obtained by CFPS and in vitro folding to show the structural similarity to the cellular expressed KcsA channel and to establish the feasibility of using this two-step approach for membrane protein production for structural studies. Our studies show that the correct folding of these membrane proteins with complex topologies can take place in vitro without the involvement of the cellular machinery for membrane protein biogenesis. This indicates that the folding instructions for these complex membrane proteins are contained entirely within the protein sequence.

Functional Site-Directed Fluorometry

Initially developed in the mid-1990s to examine the conformational changes of the canonical Shaker voltage-gated potassium channel, functional site-directed fluorometry has since been expanded to numerous other voltage-gated and ligand-gated ion channels as well as transporters, pumps, and other integral membrane proteins. The power of functional site-directed fluorometry, also known as voltage-clamp fluorometry, lies in its ability to provide information on the conformational changes in a protein in response to changes in its environment with high temporal resolution while simultaneously monitoring the function of that protein. Over time, applications of site-directed fluorometry have expanded to examine the interactions of ion channels with modulators ranging from membrane potential to ligands to accessory protein subunits to lipids. In the future, the range of questions answerable by functional site-directed fluorometry and its interpretive power should continue to improve, making it an even more powerful technique for dissecting the conformational dynamics of ion channels and other membrane proteins.

Outward Rectification of Voltage-Gated K+ Channels Evolved at Least Twice in Life History

Voltage-gated potassium (K⁺) channels are present in all living systems. Despite high structural similarities in the transmembrane domains (TMD), this K⁺ channel type segregates into at least two main functional categories—hyperpolarization-activated, inward-rectifying (K_in) and depolarization-activated, outward-rectifying (K_out) channels. Voltage-gated K⁺ channels sense the membrane voltage via a voltage-sensing domain that is connected to the conduction pathway of the channel. It has been shown that the voltage-sensing mechanism is the same in K_in and K_out channels, but its performance results in opposite pore conformations. It is not known how the different coupling of voltage-sensor and pore is implemented. Here, we studied sequence and structural data of voltage-gated K⁺ channels from animals and plants with emphasis on the property of opposite rectification. We identified structural hotspots that alone allow already the distinction between K_in and K_out channels. Among them is a loop between TMD S5 and the pore that is very short in animal K_out, longer in plant and animal K_in and the longest in plant K_out channels. In combination with further structural and phylogenetic analyses this finding suggests that outward-rectification evolved twice and independently in the animal and plant kingdom.

Structure of potassium channels

Potassium channels ubiquitously exist in nearly all kingdoms of life and perform diverse but important functions. Since the first atomic structure of a prokaryotic potassium channel (KcsA, a channel from Streptomyces lividans) was determined, tremendous progress has been made in understanding the mechanism of potassium channels and channels conducting other ions. In this review, we discuss the structure of various kinds of potassium channels, including the potassium channel with the pore-forming domain only (KcsA), voltage-gated, inwardly rectifying, tandem pore domain, and ligand-gated ones. The general properties shared by all potassium channels are introduced first, followed by specific features in each class. Our purpose is to help readers to grasp the basic concepts, to be familiar with the property of the different domains, and to understand the structure and function of the potassium channels better.

cAMP control of HCN2 channel Mg2+ block reveals loose coupling between the cyclic nucleotide-gating ring and the pore

Hyperpolarization-activated cyclic nucleotide-regulated HCN channels underlie the Na⁺-K⁺ permeable I_H pacemaker current. As with other voltage-gated members of the 6-transmembrane K_V channel superfamily, opening of HCN channels involves dilation of a helical bundle formed by the intracellular ends of S6 albeit this is promoted by inward, not outward, displacement of S4. Direct agonist binding to a ring of cyclic nucleotide-binding sites, one of which lies immediately distal to each S6 helix, imparts cAMP sensitivity to HCN channel opening. At depolarized potentials, HCN channels are further modulated by intracellular Mg²⁺ which blocks the open channel pore and blunts the inhibitory effect of outward K⁺ flux. Here, we show that cAMP binding to the gating ring enhances not only channel opening but also the kinetics of Mg²⁺ block. A combination of experimental and simulation studies demonstrates that agonist acceleration of block is mediated via acceleration of the blocking reaction itself rather than as a secondary consequence of the cAMP enhancement of channel opening. These results suggest that the activation status of the gating ring and the open state of the pore are not coupled in an obligate manner (as required by the often invoked Monod-Wyman-Changeux allosteric model) but couple more loosely (as envisioned in a modular model of protein activation). Importantly, the emergence of second messenger sensitivity of open channel rectification suggests that loose coupling may have an unexpected consequence: it may endow these erstwhile “slow” channels with an ability to exert voltage and ligand-modulated control over cellular excitability on the fastest of physiologically relevant time scales.

Biochemical and structural analysis of the hyperpolarization-activated K(+) channel MVP

In contrast to the majority of voltage-gated ion channels, hyperpolarization-activated channels remain closed at depolarizing potentials and are activated at hyperpolarizing potentials. The basis for this reverse polarity is thought to be a result of differences in the way the voltage-sensing domain (VSD) couples to the pore domain. In the absence of structural data, the molecular mechanism of this reverse polarity coupling remains poorly characterized. Here we report the characterization of the structure and local dynamics of the closed activation gate (lower S6 region) of MVP, a hyperpolarization-activated potassium channel from Methanococcus jannaschii, by electron paramagnetic resonance (EPR) spectroscopy. We show that a codon-optimized version of MVP has high expression levels in Escherichia coli, is purified as a stable tetramer, and exhibits expected voltage-dependent activity when reconstituted in liposomes. EPR analysis of the mid to lower S6 region revealed positions exhibiting strong spin–spin coupling, indicating that the activation gate of MVP is closed at 0 mV. A comparison of local environmental parameters along the activation gate for MVP and KcsA indicates that MVP adopts a different closed conformation. These structural details set the stage for future evaluations of reverse electromechanical coupling in MVP.

Using yeast to study potassium channel function and interactions with small molecules

Analysis of ion channel mutants is a widely used approach for dissecting ion channel function and for characterizing the mechanisms of action of channel-directed modulators. Expression of functional potassium channels in potassium-uptake-deficient yeast together with genetic selection approaches offers an unbiased, high-throughput, activity-based readout that can rapidly identify large numbers of active ion channel mutants. Because of the assumption-free nature of the method, detailed biophysical analysis of the functional mutants from such selections can provide new and unexpected insights into both ion channel gating and ion channel modulator mechanisms. Here, we present detailed protocols for generation and identification of functional mutations in potassium channels using yeast selections in the potassium-uptake-deficient strain SGY1528. This approach is applicable for the analysis of structure-function relationships of potassium channels from a wide range of sources including viruses, bacteria, plants, and mammals and can be used as a facile way to probe the interactions between ion channels and small-molecule modulators.

Charge movement in gating-locked HCN channels reveals weak coupling of voltage sensors and gate

HCN (hyperpolarization-activated cyclic nucleotide gated) pacemaker channels have an architecture similar to that of voltage-gated K(+) channels, but they open with the opposite voltage dependence. HCN channels use essentially the same positively charged voltage sensors and intracellular activation gates as K(+) channels, but apparently these two components are coupled differently. In this study, we examine the energetics of coupling between the voltage sensor and the pore by using cysteine mutant channels for which low concentrations of Cd(2+) ions freeze the open-closed gating machinery but still allow the sensors to move. We were able to lock mutant channels either into open or into closed states by the application of Cd(2+) and measure the effect on voltage sensor movement. Cd(2+) did not immobilize the gating charge, as expected for strict coupling, but rather it produced shifts in the voltage dependence of voltage sensor charge movement, consistent with its effect of confining transitions to either closed or open states. From the magnitude of the Cd(2+)-induced shifts, we estimate that each voltage sensor produces a roughly three- to sevenfold effect on the open-closed equilibrium, corresponding to a coupling energy of ∼1.3-2 kT per sensor. Such coupling is not only opposite in sign to the coupling in K(+) channels, but also much weaker.

Identification and analysis of cation channel homologues in human pathogenic fungi

Fungi are major causes of human, animal and plant disease. Human fungal infections can be fatal, but there are limited options for therapy, and resistance to commonly used anti-fungal drugs is widespread. The genomes of many fungi have recently been sequenced, allowing identification of proteins that may become targets for novel therapies. We examined the genomes of human fungal pathogens for genes encoding homologues of cation channels, which are prominent drug targets. Many of the fungal genomes examined contain genes encoding homologues of potassium (K⁺), calcium (Ca²⁺) and transient receptor potential (Trp) channels, but not sodium (Na⁺) channels or ligand-gated channels. Some fungal genomes contain multiple genes encoding homologues of K⁺ and Trp channel subunits, and genes encoding novel homologues of voltage-gated K_v channel subunits are found in Cryptococcus spp. Only a single gene encoding a homologue of a plasma membrane Ca²⁺ channel was identified in the genome of each pathogenic fungus examined. These homologues are similar to the Cch1 Ca²⁺ channel of Saccharomyces cerevisiae. The genomes of Aspergillus spp. and Cryptococcus spp., but not those of S. cerevisiae or the other pathogenic fungi examined, also encode homologues of the mitochondrial Ca²⁺ uniporter (MCU). In contrast to humans, which express many K⁺, Ca²⁺ and Trp channels, the genomes of pathogenic fungi encode only very small numbers of K⁺, Ca²⁺ and Trp channel homologues. Furthermore, the sequences of fungal K⁺, Ca²⁺, Trp and MCU channels differ from those of human channels in regions that suggest differences in regulation and susceptibility to drugs.

Identification of putative potassium channel homologues in pathogenic protozoa

K⁺ channels play a vital homeostatic role in cells and abnormal activity of these channels can dramatically alter cell function and survival, suggesting that they might be attractive drug targets in pathogenic organisms. Pathogenic protozoa lead to diseases such as malaria, leishmaniasis, trypanosomiasis and dysentery that are responsible for millions of deaths each year worldwide. The genomes of many protozoan parasites have recently been sequenced, allowing rational design of targeted therapies. We analyzed the genomes of pathogenic protozoa and show the existence within them of genes encoding putative homologues of K⁺ channels. These protozoan K⁺ channel homologues represent novel targets for anti-parasitic drugs. Differences in the sequences and diversity of human and parasite proteins may allow pathogen-specific targeting of these K⁺ channel homologues.

Probing S4 and S5 segment proximity in mammalian hyperpolarization-activated HCN channels by disulfide bridging and Cd2+ coordination

We explored the structural basis of voltage sensing in the HCN1 hyperpolarization-activated cyclic nucleotide-gated cation channel by examining the relative orientation of the voltage sensor and pore domains. The opening of channels engineered to contain single cysteine residues at the extracellular ends of the voltage-sensing S4 (V246C) and pore-forming S5 (C303) domains is inhibited by formation of disulfide or cysteine:Cd(2+) bonds. As Cd(2+) coordination is promoted by depolarization, the S4-S5 interaction occurs preferentially in the closed state. The failure of oxidation to catalyze dimer formation, as assayed by Western blotting, indicates the V246C:C303 interaction occurs within a subunit. Intriguingly, a similar interaction has been observed in depolarization-activated Shaker voltage-dependent potassium (Kv) channels at depolarized potentials but such an intrasubunit interaction is inconsistent with the X-ray crystal structure of Kv1.2, wherein S4 approaches S5 of an adjacent subunit. These findings suggest channels of opposite voltage-sensing polarity adopt a conserved S4-S5 orientation in the depolarized state that is distinct from that trapped upon crystallization.

Two separate interfaces between the voltage sensor and pore are required for the function of voltage-dependent K(+) channels

Voltage-dependent K⁺ (Kv) channels gate open in response to the membrane voltage. To further our understanding of how cell membrane voltage regulates the opening of a Kv channel, we have studied the protein interfaces that attach the voltage-sensor domains to the pore. In the crystal structure, three physical interfaces exist. Only two of these consist of amino acids that are co-evolved across the interface between voltage sensor and pore according to statistical coupling analysis of 360 Kv channel sequences. A first co-evolved interface is formed by the S4-S5 linkers (one from each of four voltage sensors), which form a cuff surrounding the S6-lined pore opening at the intracellular surface. The crystal structure and published mutational studies support the hypothesis that the S4-S5 linkers convert voltage-sensor motions directly into gate opening and closing. A second co-evolved interface forms a small contact surface between S1 of the voltage sensor and the pore helix near the extracellular surface. We demonstrate through mutagenesis that this interface is necessary for the function and/or structure of two different Kv channels. This second interface is well positioned to act as a second anchor point between the voltage sensor and the pore, thus allowing efficient transmission of conformational changes to the pore's gate.

Voltage-dependent ion channels open with a voltage dependence that is remarkably steep. This steep voltage dependence, which is essential to the propagation of nerve impulses, originates in the interaction between voltage-sensor domains of the ion channel and its pore. The voltage-sensor domains transmit voltage-driven conformational changes to the pore. To understand how this “electromechanical coupling” mechanism works, we have studied the protein–protein interfaces that connect the voltage sensors to the pore using bioinformatics, electrophysiological recordings, site-directed mutagenesis, and chemical cross-linking. We identify two functionally important interfaces: one links the mobile “voltage-sensor paddle” to the pore's gate near the intracellular membrane surface, while the other links an immobile region of the voltage sensor to the pore near the extracellular membrane surface. The two interfaces encompass only a small fraction of the voltage-sensor surface area, but appear to operate in unison to enable voltage-driven conformational changes within the voltage sensor so as to efficiently regulate the pore's gate.

Voltage-sensor domains contact the pore in potassium channels through two surfaces: one attaches the voltage sensor to the pore, while the other imparts force on the gate, in a process that is central to the generation of action potentials in nerve cells.

Niflumic acid alters gating of HCN2 pacemaker channels by interaction with the outer region of S4 voltage sensing domains

Niflumic acid, 2-[[3-(trifluoromethyl)phenyl]amino]pyridine-3-carboxylic acid (NFA), is a nonsteroidal anti-inflammatory drug that also blocks or modifies the gating of many ion channels. Here, we investigated the effects of NFA on hyperpolarization-activated cyclic nucleotide-gated cation (HCN) pacemaker channels expressed in X. laevis oocytes using site-directed mutagenesis and the two-electrode voltage-clamp technique. Extracellular NFA acted rapidly and caused a slowing of activation and deactivation and a hyperpolarizing shift in the voltage dependence of HCN2 channel activation (-24.5 +/- 1.2 mV at 1 mM). Slowed channel gating and reduction of current magnitude was marked in oocytes treated with NFA, while clamped at 0 mV but minimal in oocytes clamped at -100 mV, indicating the drug preferentially interacts with channels in the closed state. NFA at 0.1 to 3 mM shifted the half-point for channel activation in a concentration-dependent manner, with an EC(50) of 0.54 +/- 0.068 mM and a predicted maximum shift of -38 mV. NFA at 1 mM also reduced maximum HCN2 conductance by approximately 20%, presumably by direct block of the pore. The rapid onset and state-dependence of NFA-induced changes in channel gating suggests an interaction with the extracellular region of the S4 transmembrane helix, the primary voltage-sensing domain of HCN2. Neutralization (by mutation to Gln) of any three of the outer four basic charged residues in S4, but not single mutations, abrogated the NFA-induced shift in channel activation. We conclude that NFA alters HCN2 gating by interacting with the extracellular end of the S4 voltage sensor domains.

Genetic selection of activatory mutations in KcsA

The KcsA potassium channel from Streptomyces lividans is one of the most actively studied ion channels. However, there are still unresolved issues about its gating mechanism in vivo because the channel is only activated by highly acidic intracellular pH, meaning that it will be mostly inactive in its host environment. In this study we have used a genetic complementation assay of K+-auxotrophic E. coli (TK2420) and S. cerevisiae (SGY1528) to identify activatory or 'gain-of-function' mutations which allow functional activity of KcsA in the physiological environment of two markedly different expression systems. These mutations clustered at the helix-bundle-crossing in both TM1 and TM2 (residues H25, L105, A108, T112, W113, F114, E118 and Q119), and include residues previously implicated in the pH-gating mechanism. We discuss how these gain-of-function mutations may result in their activatory phenotype, the relative merits of the E. coli and S. cerevisiae genetic complementation approaches for the identification of gating mutations in prokaryotic K+ channels, and ways in which this assay may be improved for future use in screening protocols.

Ion channels in microbes

Studies of ion channels have for long been dominated by the animalcentric, if not anthropocentric, view of physiology. The structures and activities of ion channels had, however, evolved long before the appearance of complex multicellular organisms on earth. The diversity of ion channels existing in cellular membranes of prokaryotes is a good example. Although at first it may appear as a paradox that most of what we know about the structure of eukaryotic ion channels is based on the structure of bacterial channels, this should not be surprising given the evolutionary relatedness of all living organisms and suitability of microbial cells for structural studies of biological macromolecules in a laboratory environment. Genome sequences of the human as well as various microbial, plant, and animal organisms unambiguously established the evolutionary links, whereas crystallographic studies of the structures of major types of ion channels published over the last decade clearly demonstrated the advantage of using microbes as experimental organisms. The purpose of this review is not only to provide an account of acquired knowledge on microbial ion channels but also to show that the study of microbes and their ion channels may also hold a key to solving unresolved molecular mysteries in the future.

Intracellular Mg2+ is a voltage-dependent pore blocker of HCN channels

Hyperpolarization-activated cyclic nucleotide-gated (HCN) channels are activated by membrane hyperpolarization that creates time-dependent, inward rectifying currents, gated by the movement of the intrinsic voltage sensor S4. However, inward rectification of the HCN currents is not only observed in the time-dependent HCN currents, but also in the instantaneous HCN tail currents. Inward rectification can also be seen in mutant HCN channels that have mainly time-independent currents (5). In the present study, we show that intracellular Mg(2+) functions as a voltage-dependent blocker of HCN channels, acting to reduce the outward currents. The affinity of HCN channels for Mg(2+) is in the physiological range, with Mg(2+) binding with an IC(50) of 0.53 mM in HCN2 channels and 0.82 mM in HCN1 channels at +50 mV. The effective electrical distance for the Mg(2+) binding site was found to be 0.19 for HCN1 channels, suggesting that the binding site is in the pore. Removing a cysteine in the selectivity filter of HCN1 channels reduced the affinity for Mg(2+), suggesting that this residue forms part of the binding site deep within the pore. Our results suggest that Mg(2+) acts as a voltage-dependent pore blocker and, therefore, reduces outward currents through HCN channels. The pore-blocking action of Mg(2+) may play an important physiological role, especially for the slowly gating HCN2 and HCN4 channels. Mg(2+) could potentially block outward hyperpolarizing HCN currents at the plateau of action potentials, thus preventing a premature termination of the action potential.

Kinetic relationship between the voltage sensor and the activation gate in spHCN channels

Hyperpolarization-activated cyclic nucleotide-gated (HCN) channels are activated by membrane hyperpolarizations that cause an inward movement of the positive charges in the fourth transmembrane domain (S4), which triggers channel opening. The mechanism of how the motion of S4 charges triggers channel opening is unknown. Here, we used voltage clamp fluorometry (VCF) to detect S4 conformational changes and to correlate these to the different activation steps in spHCN channels. We show that S4 undergoes two distinct conformational changes during voltage activation. Analysis of the fluorescence signals suggests that the N-terminal region of S4 undergoes conformational changes during a previously characterized mode shift in HCN channel voltage dependence, while a more C-terminal region undergoes an additional conformational change during gating charge movements. We fit our fluorescence and ionic current data to a previously proposed 10-state allosteric model for HCN channels. Our results are not compatible with a fast S4 motion and rate-limiting channel opening. Instead, our data and modeling suggest that spHCN channels open after only two S4s have moved and that S4 motion is rate limiting during voltage activation of spHCN channels.

Patch clamp and phenotypic analyses of a prokaryotic cyclic nucleotide-gated K+ channel using Escherichia coli as a host

Prokaryotic ion channels have been valuable in providing structural models for understanding ion filtration and channel-gating mechanisms. However, their functional examinations have remained rare and usually been carried out by incorporating purified channel protein into artificial lipid membranes. Here we demonstrate the utilization of Escherichia coli to host the functional analyses by examining a putative cyclic nucleotide-gated K+ channel cloned from Magnetospirillum magnetotacticum, MmaK. When expressed in wild-type E. coli cells, MmaK renders the host sensitive to millimolar concentrations of externally applied K+, indicating MmaK forms a functional K+ conduit in the E. coli membrane in vivo. After enlarging these cells into giant spheroplasts, macro- and microscopic MmaK currents are readily detected in excised E. coli membrane patches by a patch clamp. We show that MmaK is indeed gated by submicromolar cAMP and approximately 10-fold higher concentration of cGMP and manifests as an inwardly rectified, K+-specific current with a 10.8 pS unitary conductance at -100 mV. Additionally, MmaK is inactivated by slightly acidic pH only from the cytoplasmic side. Our in vitro biophysical characterizations of MmaK correlate with its in vivo phenotype in E. coli, implicating its critical role as an intracellular cAMP and pH sensor for modulating bacterial membrane potential. Exemplified by MmaK functional studies, we establish that E. coli and its giant spheroplast provide a convenient and versatile system to express foreign channels for biophysical analyses that can be further dovetailed with microbial genetics.

Molecular template for a voltage sensor in a novel K+ channel. I. Identification and functional characterization of KvLm, a voltage-gated K+ channel from Listeria monocytogenes

The fundamental principles underlying voltage sensing, a hallmark feature of electrically excitable cells, are still enigmatic and the subject of intense scrutiny and controversy. Here we show that a novel prokaryotic voltage-gated K⁺ (Kv) channel from Listeria monocytogenes (KvLm) embodies a rudimentary, yet robust, sensor sufficient to endow it with voltage-dependent features comparable to those of eukaryotic Kv channels. The most conspicuous feature of the KvLm sequence is the nature of the sensor components: the motif is recognizable; it appears, however, to contain only three out of eight charged residues known to be conserved in eukaryotic Kv channels and accepted to be deterministic for folding and sensing. Despite the atypical sensor sequence, flux assays of KvLm reconstituted in liposomes disclosed a channel pore that is highly selective for K⁺ and is blocked by conventional Kv channel blockers. Single-channel currents recorded in symmetric K⁺ solutions from patches of enlarged Escherichia coli (spheroplasts) expressing KvLm showed that channel open probability sharply increases with depolarization, a hallmark feature of Kv channels. The identification of a voltage sensor module in KvLm with a voltage dependence comparable to that of other eukaryotic Kv channels yet encoded by a sequence that departs significantly from the consensus sequence of a eukaryotic voltage sensor establishes a molecular blueprint of a minimal sequence for a voltage sensor.

Molecular template for a voltage sensor in a novel K+ channel. II. Conservation of a eukaryotic sensor fold in a prokaryotic K+ channel

KvLm, a novel bacterial depolarization-activated K⁺ (Kv) channel isolated from the genome of Listeria monocytogenes, contains a voltage sensor module whose sequence deviates considerably from the consensus sequence of a Kv channel sensor in that only three out of eight conserved charged positions are present. Surprisingly, KvLm exhibits the steep dependence of the open channel probability on membrane potential that is characteristic of eukaryotic Kv channels whose sensor sequence approximates the consensus. Here we asked if the KvLm sensor shared a similar fold to that of Shaker, the archetypal eukaryotic Kv channel, by examining if interactions between conserved residues in Shaker known to mediate sensor biogenesis and function were conserved in KvLm. To this end, each of the five non-conserved residues in the KvLm sensor were mutated to their Shaker-like charged residues, and the impact of these mutations on the voltage dependence of activation was assayed by current recordings from excised membrane patches of Escherichia coli spheroplasts expressing the KvLm mutants. Conservation of pairwise interactions was investigated by comparison of the effect of single mutations to the impact of double mutations presumed to restore wild-type fold and voltage sensitivity. We observed significant functional coupling between sites known to interact in Shaker Kv channels, supporting the notion that the KvLm sensor largely retains the fold of its eukaryotic homologue.

Interactive domains between pore loops of the yeast K+ channel TOK1 associate with extracellular K+ sensitivity

Gating of the outward-rectifying K+ channel TOK1 of Saccharomyces cerevisiae is controlled by membrane voltage and extracellular K+ concentration. Previous studies identified two kinetically distinct effects of K+, and site-mutagenic analysis associated these K+-dependencies with domains of the extracellular turrets of the channel protein. We have mapped the TOK1 pore domains to extant K+ channel crystal structures to target additional residues contributing to TOK1 gating. Leu270, located in the first pore domain of TOK1, was found to be critical for gating and its K+ sensitivity. Analysis of amino acid substitutions indicated that spatial position of the polypeptide backbone is a primary factor determining gating sensitivity to K+. The strongest effects, with L270Y, L270F and L270W, led to more than a 30-fold decrease in apparent K+ affinity and an inversion in the apparent K+-dependence of voltage-dependent gating compared with the wild-type current. A partial rescue of wild-type gating was obtained on substitution in the second pore domain with the double mutant L270D/A428Y. These, and additional results, demarcate extracellular domains that are associated with the K+-sensitivity of TOK1 and they offer primary evidence for a synergy in gating between the two pore domains of TOK1, demonstrating an unexpected degree of long-distance interaction across the mouth of the K+ channel.

The S4 voltage sensor packs against the pore domain in the KAT1 voltage-gated potassium channel

In voltage-gated ion channels, the S4 transmembrane segment responds to changes in membrane potential and controls channel opening. The local environment of S4 is still unknown, even regarding the basic question as to whether S4 is close to the pore domain. Relying on the ability of functional KAT1 channels to rescue potassium (K+) transport-deficient yeast, we have performed an unbiased mutagenesis screen aimed at determining whether S4 packs against S5 of the pore domain. Starting with semilethal mutations of surface-exposed S5 residues of the KAT1 pore domain, we have screened randomly mutagenized libraries of S4 or S1-S3 for second-site suppressors. Our study identifies two S4 residues that interact in a highly specific manner with two S5 residues in the middle of the membrane-spanning regions, supporting a model in which the S4 voltage sensor packs against the pore domain in the hyperpolarized, or "down," state of S4.

Crystal Structure of a Mammalian Voltage-Dependent Shaker Family K+ Channel

Voltage-dependent potassium ion (K+) channels (Kv channels) conduct K+ ions across the cell membrane in response to changes in the membrane voltage, thereby regulating neuronal excitability by modulating the shape and frequency of action potentials. Here we report the crystal structure, at a resolution of 2.9 angstroms, of a mammalian Kv channel, Kv1.2, which is a member of the Shaker K+ channel family. This structure is in complex with an oxido-reductase beta subunit of the kind that can regulate mammalian Kv channels in their native cell environment. The activation gate of the pore is open. Large side portals communicate between the pore and the cytoplasm. Electrostatic properties of the side portals and positions of the T1 domain and beta subunit are consistent with electrophysiological studies of inactivation gating and with the possibility of K+ channel regulation by the beta subunit.

Prokaryotic K(+) channels: from crystal structures to diversity

The deep roots and wide branches of the K(+)-channel family are evident from genome surveys and laboratory experimentation. K(+)-channel genes are widespread and found in nearly all the free-living bacteria, archaea and eukarya. The conservation of basic structures and mechanisms such as the K(+) filter, the gate, and some of the gate's regulatory domains have allowed general insights on animal K(+) channels to be gained from crystal structures of prokaryotic channels. Since microbes are the great majority of life's diversity, it is not surprising that microbial genomes reveal structural motifs beyond those found in animals. There are open-reading frames that encode K(+)-channel subunits with unconventional filter sequences, or regulatory domains of different sizes and numbers not previously known. Parasitic or symbiotic bacteria tend not to have K(+) channels, while those showing lifestyle versatility often have more than one K(+)-channel gene. It is speculated that prokaryotic K(+) channels function to allow adaptation to environmental and metabolic changes, although the actual roles of these channels in prokaryotes are not yet known. Unlike enzymes in basic metabolism, K(+) channel, though evolved early, appear to play more diverse roles than revealed by animal research. Finding and sorting out these roles will be the goal and challenge of the near future.

Orientation of Arabidopsis thaliana KAT1 channel in the plasma membrane

The Arabidopsis thaliana KAT1, an inward-rectifying potassium channel, shares molecular features with the Shaker family of outward rectifier K(+) channels. The KAT1 amino-acid sequence reveals the presence of a positively charged S4 and a segment containing the TXGYGD signature sequence in the pore (P) region. To test whether the inward-rectifying properties of KAT1 are due to reverse orientation in the membrane, such that the voltage sensor is oriented in the opposite direction of the electric field compared with the Shaker K(+) channel, we have inserted a flag epitope in the NH(2) terminus or the S3-S4 loop. The KAT1 and tagged constructs expressed functional channels in whole cells, Xenopus oocytes and COS-7. The electrophysiological properties of both tagged constructs were similar to those of the wild type. Immunofluorescence with an antibody against the flag epitope and an anti-C terminal KAT1 determined the membrane localization of these epitopes and the orientation of the KAT1 channel in the membrane. Our data confirm that KAT1 in eukaryotic cells has an orientation similar to the Shaker K(+) channel.

Molecular coupling between voltage sensor and pore opening in the Arabidopsis inward rectifier K+ channel KAT1

Animal and plant voltage-gated ion channels share a common architecture. They are made up of four subunits and the positive charges on helical S4 segments of the protein in animal K⁺ channels are the main voltage-sensing elements. The KAT1 channel cloned from Arabidopsis thaliana, despite its structural similarity to animal outward rectifier K⁺ channels is, however, an inward rectifier. Here we detected KAT1-gating currents due to the existence of an intrinsic voltage sensor in this channel. The measured gating currents evoked in response to hyperpolarizing voltage steps consist of a very fast (τ = 318 ± 34 μs at −180 mV) and a slower component (4.5 ± 0.5 ms at −180 mV) representing charge moved when most channels are closed. The observed gating currents precede in time the ionic currents and they are measurable at voltages (less than or equal to −60) at which the channel open probability is negligible (≈10⁻⁴). These two observations, together with the fact that there is a delay in the onset of the ionic currents, indicate that gating charge transits between several closed states before the KAT1 channel opens. To gain insight into the molecular mechanisms that give rise to the gating currents and lead to channel opening, we probed external accessibility of S4 domain residues to methanethiosulfonate-ethyltrimethylammonium (MTSET) in both closed and open cysteine-substituted KAT1 channels. The results demonstrate that the putative voltage–sensing charges of S4 move inward when the KAT1 channels open.

Quickening the pace: looking into the heart of HCN channels

Hyperpolarization-activated cyclic nucleotide-gated (HCN) channels contribute to a wide range of physiological functions and regulate cardiac and neuronal pacemaker activity. Here, we review recent advances in three areas: the polarity of the S4 movement with hyperpolarization, the location of the activation gate, and the structure of the C-terminal C linker and CNBD.

Changes in local S4 environment provide a voltage-sensing mechanism for mammalian hyperpolarization-activated HCN channels

The positively charged S4 transmembrane segment of voltage-gated channels is thought to function as the voltage sensor by moving charge through the membrane electric field in response to depolarization. Here we studied S4 movements in the mammalian HCN pacemaker channels. Unlike most voltage-gated channel family members that are activated by depolarization, HCN channels are activated by hyperpolarization. We determined the reactivity of the charged sulfhydryl-modifying reagent, MTSET, with substituted cysteine (Cys) residues along the HCN1 S4 segment. Using an HCN1 channel engineered to be MTS resistant except for the chosen S4 Cys substitution, we determined the reactivity of 12 S4 residues to external or internal MTSET application in either the closed or open state of the channel. Cys substitutions in the NH₂-terminal half of S4 only reacted with external MTSET; the rates of reactivity were rapid, regardless of whether the channel was open or closed. In contrast, Cys substitutions in the COOH-terminal half of S4 selectively reacted with internal MTSET when the channel was open. In the open state, the boundary between externally and internally accessible residues was remarkably narrow (∼3 residues). This suggests that S4 lies in a water-filled gating canal with a very narrow barrier between the external and internal solutions, similar to depolarization-gated channels. However, the pattern of reactivity is incompatible with either classical gating models, which postulate a large translational or rotational movement of S4 within a gating canal, or with a recent model in which S4 forms a peripheral voltage-sensing paddle (with S3b) that moves within the lipid bilayer (the KvAP model). Rather, we suggest that voltage sensing is due to a rearrangement in transmembrane segments surrounding S4, leading to a collapse of an internal gating canal upon channel closure that alters the shape of the membrane field around a relatively static S4 segment.

S4 movement in a mammalian HCN channel

Hyperpolarization-activated, cyclic nucleotide–gated ion channels (HCN) mediate an inward cation current that contributes to spontaneous rhythmic firing activity in the heart and the brain. HCN channels share sequence homology with depolarization-activated Kv channels, including six transmembrane domains and a positively charged S4 segment. S4 has been shown to function as the voltage sensor and to undergo a voltage-dependent movement in the Shaker K⁺ channel (a Kv channel) and in the spHCN channel (an HCN channel from sea urchin). However, it is still unknown whether S4 undergoes a similar movement in mammalian HCN channels. In this study, we used cysteine accessibility to determine whether there is voltage-dependent S4 movement in a mammalian HCN1 channel. Six cysteine mutations (R247C, T249C, I251C, S253C, L254C, and S261C) were used to assess S4 movement of the heterologously expressed HCN1 channel in Xenopus oocytes. We found a state-dependent accessibility for four S4 residues: T249C and S253C from the extracellular solution, and L254C and S261C from the internal solution. We conclude that S4 moves in a voltage-dependent manner in HCN1 channels, similar to its movement in the spHCN channel. This S4 movement suggests that the role of S4 as a voltage sensor is conserved in HCN channels. In addition, to determine the reason for the different cAMP modulation and the different voltage range of activation in spHCN channels compared with HCN1 channels, we constructed a COOH-terminal–deleted spHCN. This channel appeared to be similar to a COOH-terminal–deleted HCN1 channel, suggesting that the main functional differences between spHCN and HCN1 channels are due to differences in their COOH termini or in the interaction between the COOH terminus and the rest of the channel protein in spHCN channels compared with HCN1 channels.

Arranging the elements of the potassium channel: the T1 domain occludes the cytoplasmic face of the channel

The voltage-gated potassium channel is currently one of the few membrane proteins where functional roles have been mapped onto specific segments of sequence. Although high-resolution structures of the transmembrane portions of three bacterial potassium channels, the tetramerization domain and the cytoplasmic "ball" are available, their relative spatial arrangement in mammalian channels remains a matter of ongoing debate. Cryo-electron microscopic images of the six transmembrane voltage-gated Kv channel have been reconstructed at up to 18 A resolution, revealing that the T1 domain tetramerizes and is suspended below the transmembrane segments. However, the resolution of these images is insufficient to reveal the location of the third piece of the puzzle, the inactivating ball domain. We have used the aberrant interactions observed in a series of chimaeric channels to establish that an assembled T1 domain restricts access to the cytoplasmic face of the channel, suggesting that the N-terminal "ball and chain" may be confined in the space between the T1 domain and the transmembrane portion of the channel.

Charybdotoxin Binding in the IKs Pore Demonstrates Two MinK Subunits in Each Channel Complex

I(Ks) voltage-gated K(+) channels contain four pore-forming KCNQ1 subunits and MinK accessory subunits in a number that has been controversial. Here, I(Ks) channels assembled naturally by monomer subunits are compared to those with linked subunits that force defined stoichiometries. Two strategies that exploit charybdotoxin (CTX)-sensitive subunit variants are applied. First, CTX on rate, off rate, and equilibrium affinity are found to be the same for channels of monomers and those with a fixed 2:4 MinK:KCNQ1 valence. Second, 3H-CTX and an antibody are used to directly quantify channels and MinK subunits, respectively, showing 1.97 +/- 0.07 MinK per I(Ks) channel. Additional MinK subunits do not enter channels of monomeric subunits or those with fixed 2:4 valence. We conclude that two MinK subunits are necessary, sufficient, and the norm in I(Ks) channels. This stoichiometry is expected for other K(+) channels that contain MinK or MinK-related peptides (MiRPs).

Gain-of-function mutations indicate that Escherichia coli Kch forms a functional K+ conduit in vivo

Although Kch of Escherichia coli is thought to be a K(+) channel by sequence homology, there is little evidence that it actually conducts K(+) ions in vitro or in vivo. We isolated gain-of-function (GOF) Kch mutations that render bacteria specifically sensitive to K(+) ions. Millimolar added K(+), but not Na(+) or sorbitol, blocks the initiation or continuation of mutant growth in liquid media. The mutations are mapped at the RCK (or KTN) domain, which is considered to be the cytoplasmic sensor controlling the gate. Additional mutations directed to the K(+)-filter sequence rescue the GOF mutant. The apparent K(+)-specific conduction through the 'loose-cannon' mutant channel suggests that the wild-type Kch channel also conducts, albeit in a regulated manner. Changing the internal ATG does not erase the GOF toxicity, but removes kch's short second product, suggesting that it is not required for channel function in vivo. The mutant phenotypes are better explained by a perturbation of membrane potential instead of internal K(+) concentration. Possible implications on the normal function of Kch are discussed.

MjK1, a K+ channel from M. jannaschii, mediates K+ uptake and K+ sensitivity in E. coli

The methanogenic and hyperthermophilic deep-sea archaeon Methanococcus jannaschii has three putative K+ channels, MVP (Mj0139), MjK1 (Mj0138.1) and MjK2 (Mj1357). The physiological function of these K+ channels was examined in a viability assay, using the Escherichia coli mutant LB2003 (kup1, DeltakdpABC5, DeltatrkA). While MjK2 expression had no effects on the potassium-dependent phenotype of LB2003, MVP and MjK1 complemented the deficiency at a concentration of 1 mM KCl. In contrast to KcsA, MthK and MVP, MjK1 strongly affected host cell viability at 10 and 100 mM KCl. The toxic effects were less pronounced when growth media were supplemented with the K+ channel blocker BaCl2.