Atomic force microscopy of supported lipid bilayers

Structure and thermodynamics of supported lipid membranes on hydrophobic van der Waals surfaces

Understanding the adsorption and physical characteristics of supported lipid membranes is crucial for their effective use as model cell membranes. Their morphological and thermodynamic properties at the nanoscale have traditionally been studied on hydrophilic substrates, such as mica and silicon oxide, which have proved to facilitate the reconstruction of biomembranes. However, in more recent years, with the advent of the van der Waals crystals technology, two-dimensional crystals such as graphene have been proposed as potential substrates in biosensing devices. Membranes formed on these crystals are expected to behave differently owing to their intrinsic hydrophobicity, however thus far knowledge of their morphological and thermodynamic properties is lacking. Here we present a comprehensive nanoscale analysis of the adsorption of phosphatidylcholine lipid monolayers on two of the most commonly used van der Waals crystals, graphite and hexagonal boron nitride. Both morphological and thermodynamic properties of the lipid membranes were investigated using temperature-controlled atomic force microscopy. Our experiments show that the lipids adsorb onto the crystals, forming monolayers with their orientation dependent upon their concentration. Furthermore, we found that the hydrophobicity of van der Waals crystals determines a strong increase in the transition temperature of the lipid monolayer compared to that observed on hydrophilic substrates. These results are important for understanding the properties of lipid membranes at solid surfaces and extending their use to novel drug delivery and biosensing devices made of van der Waals crystals.

Nanoactuator for Neuronal Optoporation

Light-driven modulation of neuronal activity at high spatial-temporal resolution is becoming of high interest in neuroscience. In addition to optogenetics, nongenetic membrane-targeted nanomachines that alter the electrical state of the neuronal membranes are in demand. Here, we engineered and characterized a photoswitchable conjugated compound (BV-1) that spontaneously partitions into the neuronal membrane and undergoes a charge transfer upon light stimulation. The activity of primary neurons is not affected in the dark, whereas millisecond light pulses of cyan light induce a progressive decrease in membrane resistance and an increase in inward current matched to a progressive depolarization and action potential firing. We found that illumination of BV-1 induces oxidation of membrane phospholipids, which is necessary for the electrophysiological effects and is associated with decreased membrane tension and increased membrane fluidity. Time-resolved atomic force microscopy and molecular dynamics simulations performed on planar lipid bilayers revealed that the underlying mechanism is a light-driven formation of pore-like structures across the plasma membrane. Such a phenomenon decreases membrane resistance and increases permeability to monovalent cations, namely, Na+, mimicking the effects of antifungal polyenes. The same effect on membrane resistance was also observed in nonexcitable cells. When sustained light stimulations are applied, neuronal swelling and death occur. The light-controlled pore-forming properties of BV-1 allow performing "on-demand" light-induced membrane poration to rapidly shift from cell-attached to perforated whole-cell patch-clamp configuration. Administration of BV-1 to ex vivo retinal explants or in vivo primary visual cortex elicited neuronal firing in response to short trains of light stimuli, followed by activity silencing upon prolonged light stimulations. BV-1 represents a versatile molecular nanomachine whose properties can be exploited to induce either photostimulation or space-specific cell death, depending on the pattern and duration of light stimulation.

Insight into the hydration friction of lipid bilayers

Hydration layers formed on charged sites play crucial roles in many hydration lubrication systems in aqueous media. However, the underlying molecular mechanism is not well understood. Herein, we explored the hydration friction of lipid bilayers with different charged headgroups at the nanoscale through a combination of frequency-modulation atomic force microscopy and friction force microscopy. The nanoscale friction experiments showed that the hydration friction coefficient and frictional energy dissipation of a cationic lipid (DPTAP) were much lower than those of zwitterionic (DPPE) and anionic (DPPG) lipids. The hydration layer probing at the surfaces of different lipid bilayers clearly revealed the relationship between the charged lipid headgroups and hydration layer structures. Our detailed analysis demonstrated that the cationic lipid had the largest hydration force in comparison with zwitterionic and anionic lipids. These friction and hydration force results indicated that the difference of the lipid headgroup charge resulted in different hydration strengths which led to the difference of hydration friction behaviors. The findings in this study provide molecular insights into the hydration friction of lipid bilayers, which has potential implications for the development of efficient hydration lubrication systems with boundary lipid bilayers in aqueous media.

Gold nanoparticle adsorption alters the cell stiffness and cell wall bio-chemical landscape of Candida albicans fungal cells

HYPOTHESIS

Nanomaterials have been extensively investigated for a wide range of biomedical applications, including as antimicrobial agents, drug delivery vehicles, and diagnostic devices. The commonality between these biomedical applications is the necessity for the nanoparticle to interact with or pass through the cellular wall and membrane. Cell-nanomaterial interactions/uptake can occur in various ways, including adhering to the cell wall, forming aggregates on the surface, becoming absorbed within the cell wall itself, or transversing into the cell cytoplasm. These interactions are common to mammalian cells, bacteria, and yeast cells. This variety of interactions can cause changes to the integrity of the cell wall and the cell overall, but the precise mechanisms underpinning such interactions remain poorly understood. Here, we investigate the interaction between commonly investigated gold nanoparticles (AuNPs) and the cell wall/membrane of a model fungal cell to explore the general effects of interaction and uptake.

EXPERIMENTS

The interactions between 100 nm citrate-capped AuNPs and the cell wall of Candida albicans fungal cells were studied using a range of advanced microscopy techniques, including atomic force microscopy, confocal laser scanning microscopy, scanning electron microscopy, transmission electron microscopy, and synchrotron-FTIR micro-spectroscopy.

FINDINGS

In most cases, particles adhered on the cell surface, although instances of particles being up-taken into the cell cytoplasm and localised within the cell wall and membrane were also observed. There was a measurable increase in the stiffness of the fungal cell after AuNPs were introduced. Analysis of the synchrotron-FTIR data showed significant changes in spectral features associated with phospholipids and proteins after exposure to AuNPs.

Gold-Supported Lipid Membranes Formed by Redox-Triggered Vesicle Fusion on Binary Self-Assembled Monolayers: Ion-Pairing Association and Surface Hydrophilicity

The assembly of biomimetic, planar supported lipid bilayers (SLBs) by the popular vesicle fusion method, which relies on the spontaneous adsorption and rupture of small unilamellar vesicles from aqueous solution on a solid surface, typically works with a limited range of support materials and lipid systems. We previously reported a conceptual advance in the formation of SLBs from vesicles in the gel or fluid phase using the interfacial ion-pairing association of charged phospholipid headgroups with electrochemically generated cationic ferroceniums bound to a self-assembled monolayer (SAM) chemisorbed to gold. This redox-driven approach lays down a single bilayer membrane on the SAM-modified gold surface at room temperature within minutes and is compatible with both anionic and zwitterionic phospholipids. The present work explores the effects of the surface ferrocene concentration and hydrophobicity/hydrophilicity on the formation of continuous SLBs of dialkyl phosphatidylserine, dialkyl phosphatidylglycerol, and dialkyl phosphatidylcholine using binary SAMs of ferrocenylundecanethiolate (FcC₁₁S) and dodecanethiolate (CH₃C₁₁S) or hydroxylundecanethiolate (HOC₁₁S) comprising different surface mole fractions of ferrocene (χ_Fc^surf). An increase in the surface hydrophilicity and surface free energy of the FcC₁₁S/HOC₁₁S SAM mitigates the decrease in the attractive ion-pairing interactions resulting from a reduced χ_Fc^surf. SLBs of ≳80% area coverage form on the FcC₁₁S/HOC₁₁S SAM for all the phospholipid types down to χ_Fc^surf of at least 0.2, composition yielding a water contact angle (θ_W) of 44 ± 4°. By contrast, a greater number of ion-pairing interactions is required on the hydrophobic FcC₁₁S/CH₃C₁₁S surface to drive the vesicle fusion process; bilayers or bilayer patches form at χ_Fc^surf ≳ 0.6 (θ_W = 97 ± 3°). These findings will aid in tailoring the surface chemistry of redox-active modified surfaces to widen the conditions that yield supported lipid membranes.

Caco-2 cell-derived biomimetic electrochemical biosensor for cholera toxin detection

Cholera is a highly contagious and lethal waterborne disease induced by an infection with Vibrio cholerae (V. cholerae) secreting cholera toxin (CTx). Cholera toxin subunit B (CTxB) from the CTx specifically binds with monosialo-tetra-hexosyl-ganglioside (GM1) found on the exterior cell membrane of an enterocyte. Bioinspired by the pathological process of CTx, we developed an electrochemical biosensor with GM1-expressing Caco-2 cell membrane (CCM) on the electrode surface. Briefly, the electrode surface was functionalized with CCM using the vesicle fusion method. We determined the CTxB detection performances of Caco-2 cell membrane-coated biosensor (CCB) using electrochemical impedance spectroscopy (EIS). the CCB had an excellent limit of detection of ∼11.46 nM and a detection range spanning 100 ng/mL - 1 mg/mL. In addition, the CCB showed high selectivity against various interfering molecules, including abundant constituents of intestinal fluid and various bacterial toxins. The long-term stability of the CCBs was also verified for 3 weeks using EIS. Overall, the CCB has excellent potential for practical use such as point-of-care and cost-effective testing for CTxB detection in developing countries.

Insights in Cell Biomechanics through Atomic Force Microscopy

We review the advances obtained by using Atomic Force Microscopy (AFM)-based approaches in the field of cell/tissue mechanics and adhesion, comparing the solutions proposed and critically discussing them. AFM offers a wide range of detectable forces with a high force sensitivity, thus allowing a broad class of biological issues to be addressed. Furthermore, it allows for the accurate control of the probe position during the experiments, providing spatially resolved mechanical maps of the biological samples with subcellular resolution. Nowadays, mechanobiology is recognized as a subject of great relevance in biotechnological and biomedical fields. Focusing on the past decade, we discuss the intriguing issues of cellular mechanosensing, i.e., how cells sense and adapt to their mechanical environment. Next, we examine the relationship between cell mechanical properties and pathological states, focusing on cancer and neurodegenerative diseases. We show how AFM has contributed to the characterization of pathological mechanisms and discuss its role in the development of a new class of diagnostic tools that consider cell mechanics as new tumor biomarkers. Finally, we describe the unique ability of AFM to study cell adhesion, working quantitatively and at the single-cell level. Again, we relate cell adhesion experiments to the study of mechanisms directly or secondarily involved in pathologies.

Miscibility of Phosphatidylcholines in Bilayers: Effect of Acyl Chain Unsaturation

The miscibility of phospholipids in a hydrated bilayer is an issue of fundamental importance for understanding the organization of biological membranes. Despite research on lipid miscibility, its molecular basis remains poorly understood. In this study, all-atom MD simulations complemented by Langmuir monolayer and DSC experiments have been performed to investigate the molecular organization and properties of lipid bilayers composed of phosphatidylcholines with saturated (palmitoyl, DPPC) and unsaturated (oleoyl, DOPC) acyl chains. The experimental results showed that the DOPC/DPPC bilayers are systems exhibiting a very limited miscibility (strongly positive values of excess free energy of mixing) at temperatures below the DPPC phase transition. The excess free energy of mixing is divided into an entropic component, related to the ordering of the acyl chains, and an enthalpic component, resulting from the mainly electrostatic interactions between the headgroups of lipids. MD simulations showed that the electrostatic interactions for lipid like-pairs are much stronger than that for mixed pairs and temperature has only a slight influence on these interactions. On the contrary, the entropic component increases strongly with increasing temperature, due to the freeing of rotation of acyl chains. Therefore, the miscibility of phospholipids with different saturations of acyl chains is an entropy-driven process.

Dynamics of DNA Origami Lattices

Hierarchical assembly of programmable DNA frameworks─such as DNA origami─paves the way for versatile nanometer-precise parallel nanopatterning up to macroscopic scales. As of now, the rapid evolution of the DNA nanostructure design techniques and the accessibility of these methods provide a feasible platform for building highly ordered DNA-based assemblies for various purposes. So far, a plethora of different building blocks based on DNA tiles and DNA origami have been introduced, but the dynamics of the large-scale lattice assembly of such modules is still poorly understood. Here, we focus on the dynamics of two-dimensional surface-assisted DNA origami lattice assembly at mica and lipid substrates and the techniques for prospective three-dimensional assemblies, and finally, we summarize the potential applications of such systems.

Two-Dimensional DNA Origami Lattices Assembled on Lipid Bilayer Membranes

Molecular self-assembly has attracted much attention as a method to create novel supramolecular architectures. The scaffolded DNA origami method has enabled the construction of almost arbitrarily shaped DNA nanostructures, which can be further used as components of higher-order architectures. Here, we describe a method to construct and visualize two-dimensional (2D) lattices self-assembled from DNA origami tiles on lipid bilayer membranes. The weak adsorption of DNA origami tiles onto the mica-supported lipid bilayer allows their lateral diffusion along the surface, facilitating interactions among the tiles to assemble and form large 2D lattices. Depending on the design (i.e., shape, size, and interactions with each other) of DNA origami tiles, a variety of 2D lattices made of DNA are constructed.

Interplay of membrane crosslinking and curvature induction by annexins

Efficient plasma membrane repair (PMR) is required to repair damage sustained in the cellular life cycle. The annexin family of proteins, involved in PMR, are activated by Ca²⁺ influx from extracellular media at the site of injury. Mechanistic studies of the annexins have been overwhelmingly performed using a single annexin, despite the recruitment of multiple annexins to membrane damage sites in living cells. Hence, we investigate the effect of the presence of the crosslinking annexins, annexin A1, A2 and A6 (ANXA1, ANXA2 and ANXA6) on the membrane curvature induction of annexin A4 (ANXA4) in model membrane systems. Our data support a mechanistic model of PMR where ANXA4 induced membrane curvature and ANXA6 crosslinking promotes wound closure. The model now can be expanded to include ANXA1 and ANXA2 as specialist free edge membrane crosslinkers that act in concert with ANXA4 induced curvature and ANXA6 crosslinking.

Behavior of Citrate-Capped Ultrasmall Gold Nanoparticles on a Supported Lipid Bilayer Interface at Atomic Resolution

Nanomaterials have the potential to transform biological and biomedical research, with applications ranging from drug delivery and diagnostics to targeted interference of specific biological processes. Most existing research is aimed at developing nanomaterials for specific tasks such as enhanced biocellular internalization. However, fundamental aspects of the interactions between nanomaterials and biological systems, in particular, membranes, remain poorly understood. In this study, we provide detailed insights into the molecular mechanisms governing the interaction and evolution of one of the most common synthetic nanomaterials in contact with model phospholipid membranes. Using a combination of atomic force microscopy (AFM) and molecular dynamics (MD) simulations, we elucidate the precise mechanisms by which citrate-capped 5 nm gold nanoparticles (AuNPs) interact with supported lipid bilayers (SLBs) of pure fluid (DOPC) and pure gel-phase (DPPC) phospholipids. On fluid-phase DOPC membranes, the AuNPs adsorb and are progressively internalized as the citrate capping of the NPs is displaced by the surrounding lipids. AuNPs also interact with gel-phase DPPC membranes where they partially embed into the outer leaflet, locally disturbing the lipid organization. In both systems, the AuNPs cause holistic perturbations throughout the bilayers. AFM shows that the lateral diffusion of the particles is several orders of magnitude smaller than that of the lipid molecules, which creates some temporary scarring of the membrane surface. Our results reveal how functionalized AuNPs interact with differing biological membranes with mechanisms that could also have implications for cooperative membrane effects with other molecules.

Site-selective modification of metallic nanoparticles

Surface patterning of inorganic nanoparticles through site-selective functionalization with mixed-ligand shells or additional inorganic material is an intriguing approach to developing tailored nanomaterials with potentially novel and/or multifunctional properties. The unique physicochemical properties of such nanoparticles are likely to impact their behavior and functionality in biological environments, catalytic systems, and electronics applications, making it vital to understand how we can achieve and characterize such regioselective surface functionalization. This Feature Article will review methods by which chemists have selectively modified the surface of colloidal nanoparticles to obtain both two-sided Janus particles and nanoparticles with patchy or stripey mixed-ligand shells, as well as to achieve directed growth of mesoporous oxide materials and metals onto existing nanoparticle templates in a spatially and compositionally controlled manner. The advantages and drawbacks of various techniques used to characterize the regiospecificity of anisotropic surface coatings are discussed, as well as areas for improvement, and future directions for this field.

Phospholipid Monolayer/Graphene Interfaces: Curvature Effect on Lipid Morphology and Dynamics

Phospholipids are an important class of lipids that are widely used as model platforms for the study of biological processes and interactions. These lipids can form stable interfaces with solid substrates, such as graphene, and these interfaces have potential applications in biosensing and targeted drug delivery. In this paper, we perform molecular dynamics simulations of graphene-supported lipid monolayers to characterize the lipid properties of such interfaces. We observed substantial differences between the supported monolayer and free-standing bilayer in terms of the lipid properties, such as the tail order parameters, density profiles, diffusion rates, and so on. Furthermore, we studied these interfaces on sinusoidally deformed graphene substrates to understand the effect of curvature on the supported lipids. Here, we observed that the nature of the substrate curvature, that is, concave or convex, can locally affect the lipid/substrate adhesion strength and induce structural and dynamic changes in the adsorbed lipid monolayer. Together, these results help characterize the properties of lipid/graphene interfaces and provide insights into the substrate curvature effect on these interfaces, which can enable the tuning of lipid properties for various sensor devices and drug delivery applications.

Lipid bilayer-assisted dynamic self-assembly of hexagonal DNA origami blocks into monolayer crystalline structures with designed geometries

The DNA origami technique is used to construct custom-shaped nanostructures that can be used as components of two-dimensional crystalline structures with user-defined structural patterns. Here, we designed an Mg²⁺-responsive hexagonal 3D DNA origami block with self-shape-complementary ruggedness on the sides. Hexagonal DNA origami blocks were electrostatically adsorbed onto a fluidic lipid bilayer membrane surface to ensure lateral diffusion. A subsequent increase in the Mg²⁺ concentration in the surrounding environment induced the self-assembly of the origami blocks into lattices with prescribed geometries based on a self-complementary shape fit. High-speed atomic force microscopy (HS-AFM) images revealed dynamic events involved in the self-assembly process, including edge reorganization, defect splitting, diffusion, and filling, which provide a glimpse into how the lattice structures are self-improved.

•

Lipid bilayer-assisted self-assembly of 3D DNA origami blocks was achieved

•

Time-lapse AFM imaging of the self-assembly processes was performed

•

Different assembly patterns were achieved from a single DNA origami design

Modulation of plant plasma membrane structure by exogenous fatty acid hydroperoxide is a potential perception mechanism for their eliciting activity

Oxylipins are lipid-derived molecules that are ubiquitous in eukaryotes and whose functions in plant physiology have been widely reported. They appear to play a major role in plant immunity by orchestrating reactive oxygen species (ROS) and hormone-dependent signalling pathways. The present work focuses on the specific case of fatty acid hydroperoxides (HPOs). Although some studies report their potential use as exogenous biocontrol agents for plant protection, evaluation of their efficiency in planta is lacking and no information is available about their mechanism of action. In this study, the potential of 13(S)-hydroperoxy-(9Z, 11E)-octadecadienoic acid (13-HPOD) and 13(S)-hydroperoxy-(9Z, 11E, 15Z)-octadecatrienoic acid (13-HPOT), as plant defence elicitors and the underlying mechanism of action is investigated. Arabidopsis thaliana leaf resistance to Botrytis cinerea was observed after root application with HPOs. They also activate early immunity-related defence responses, like ROS. As previous studies have demonstrated their ability to interact with plant plasma membranes (PPM), we have further investigated the effects of HPOs on biomimetic PPM structure using complementary biophysics tools. Results show that HPO insertion into PPM impacts its global structure without solubilizing it. The relationship between biological assays and biophysical analysis suggests that lipid amphiphilic elicitors that directly act on membrane lipids might trigger early plant defence events.

Revealing local molecular distribution, orientation, phase separation, and formation of domains in artificial lipid layers: Towards comprehensive characterization of biological membranes

Lipids, together with molecules such as DNA and proteins, are one of the most relevant systems responsible for the existence of life. Selected lipids are able to assembly into various organized structures, such as lipid membranes. The unique properties of lipid membranes determine their complex functions, not only to separate biological environments, but also to participate in regulatory functions, absorption of nutrients, cell-cell communication, endocytosis, cell signaling, and many others. Despite numerous scientific efforts, still little is known about the reason underlying the variability within lipid membranes, and its biochemical significance. In this review, we discuss the structural complexity of lipid membranes, as well as the importance to simplify studied systems in order to understand phenomena occurring in natural, complex membranes. Such systems require a model interface to be analyzed. Therefore, here we focused on analytical studies of artificial systems at various interfaces. The molecular structure of lipid membranes, specifically the nanometric thickens of molecular bilayer, limits in a major extent the choice of highly sensitive methods suitable to study such structures. Therefore, we focused on methods that combine high sensitivity, and/or chemical selectivity, and/or nanometric spatial resolution, such as atomic force microscopy, nanospectroscopy (tip-enhanced Raman spectroscopy, infrared nanospectroscopy), phase modulation infrared reflection-absorption spectroscopy, sum-frequency generation spectroscopy. We summarized experimental and theoretical approaches providing information about molecular structure and composition, lipid spatial distribution (phase separation), organization (domain shape, molecular orientation) of lipid membranes, and real-time visualization of the influence of various molecules (proteins, drugs) on their integrity. An integral part of this review discusses the latest achievements in the field of lipid layer-based biosensors.

Accurate Wide-Modulus-Range Nanomechanical Mapping of Ultrathin Interfaces with Bimodal Atomic Force Microscopy

The nanoscale determination of the mechanical properties of interfaces is of paramount relevance in materials science and cell biology. Bimodal atomic force microscopy (AFM) is arguably the most advanced nanoscale method for mapping the elastic modulus of interfaces. Simulations, theory, and experiments have validated bimodal AFM measurements on thick samples (from micrometer to millimeter). However, the bottom-effect artifact, this is, the influence of the rigid support on the determination of the Young's modulus, questions its accuracy for ultrathin materials and interfaces (1-15 nm). Here we develop a bottom-effect correction method that yields the intrinsic Young's modulus value of a material independent of its thickness. Experiments and numerical simulations validate the accuracy of the method for a wide range of materials (1 MPa to 100 GPa). Otherwise, the Young's modulus of an ultrathin material might be overestimated by a 10-fold factor.

Aquaporin-Incorporated Graphene-Oxide Membrane for Pressurized Desalination with Superior Integrity Enabled by Molecular Recognition

Aquaporins (AQPs), the natural water channel, have been actively investigated for overcoming the limitations of conventional desalination membranes. An AQP-based biomimetic high-pressure desalination membrane is designed by tethering AQP-carrying red blood cell membrane (RBCM) vesicles onto graphene oxide (GO). RBCMs with AQPs are incorporated into GO based on the molecular recognition between the integrin of RBCM and Arginine-Glycine-Aspartate (RGD) ligand on the GO surface. GO is pre-functionalized with the Glycine-Arginine-Glycine-Aspartate-Serine peptide to capture RBCMs. RBCMs are inserted between GO flakes through the material-specific interaction between integrin of RBCM and RGD ligand, thus ensuring sufficient coverage of channels/defects in the GO for the full functioning of the AQPs. The incorporated AQPs are not completely fixed at the GO, as tethering is mediated by the integrin-RGD pair, and suitable AQP flexibility for appropriate functioning is guaranteed without frictional hindrance from the solid substrate. The integrity of the GO-RBCMs binding can provide mechanical strength for enduring high-pressure reverse-osmosis conditions for treating large amounts of water. This biomimetic membrane exhibits 99.1% NaCl rejection and a water permeance of 7.83 L m-2 h-1 bar-1 at 8 bar with a 1000-ppm NaCl feed solution, which surpasses the upper-bound line of current state-of-the-art membranes.

Pore Forming Protein Induced Biomembrane Reorganization and Dynamics: A Focused Review

Pore forming proteins are a broad class of pathogenic proteins secreted by organisms as virulence factors due to their ability to form pores on the target cell membrane. Bacterial pore forming toxins (PFTs) belong to a subclass of pore forming proteins widely implicated in bacterial infections. Although the action of PFTs on target cells have been widely investigated, the underlying membrane response of lipids during membrane binding and pore formation has received less attention. With the advent of superresolution microscopy as well as the ability to carry out molecular dynamics (MD) simulations of the large protein membrane assemblies, novel microscopic insights on the pore forming mechanism have emerged over the last decade. In this review, we focus primarily on results collated in our laboratory which probe dynamic lipid reorganization induced in the plasma membrane during various stages of pore formation by two archetypal bacterial PFTs, cytolysin A (ClyA), an α-toxin and listeriolysin O (LLO), a β-toxin. The extent of lipid perturbation is dependent on both the secondary structure of the membrane inserted motifs of pore complex as well as the topological variations of the pore complex. Using confocal and superresolution stimulated emission depletion (STED) fluorescence correlation spectroscopy (FCS) and MD simulations, lipid diffusion, cholesterol reorganization and deviations from Brownian diffusion are correlated with the oligomeric state of the membrane bound protein as well as the underlying membrane composition. Deviations from free diffusion are typically observed at length scales below ∼130 nm to reveal the presence of local dynamical heterogeneities that emerge at the nanoscale-driven in part by preferential protein binding to cholesterol and domains present in the lipid membrane. Interrogating the lipid dynamics at the nanoscale allows us further differentiate between binding and pore formation of β- and α-PFTs to specific domains in the membrane. The molecular insights gained from the intricate coupling that occurs between proteins and membrane lipids and receptors during pore formation are expected to improve our understanding of the virulent action of PFTs.

A multiplexed phospholipid membrane platform for curvature sensitive protein screening

The curvature of lipid membranes plays a key role in many relevant biological processes such as membrane trafficking, vesicular budding and host-virus interactions. In vitro studies on the membrane curvature of simplified biomimetic models in the nanometer range are challenging, due to their complicated nanofabrication processes. In this work, we propose a simple and low-cost platform for curvature sensitive protein screening, prepared through scanning probe lithography (SPL) methods, where lipid bilayer patches of different compositions can be multiplexed onto substrate areas with tailored local curvature. The curvature is imposed by anchoring nanoparticles of the desired size to the substrate prior to lithography. As a proof of principle, we demonstrate that a positive curvature membrane sensitive protein derived from the BAR domain of Nadrin2 binds selectively to lipid patches patterned on substrate areas coated with 100 nm nanoparticles. The platform opens up a path for screening curvature-dependent protein-membrane interaction studies by providing a flexible and easy to prepare substrate with control over lipid composition and membrane curvature.

Interaction of Tau construct K18 with model lipid membranes

One of the hallmarks of Alzheimer's disease (AD) is the formation of neurofibrillary tangles, resulting from the aggregation of the tubulin associated unit protein (Tau), which holds a vital role in maintaining neuron integrity in a healthy brain. The development of such aggregates and their deposition in the brain seem to correlate with the onset of neurodegeneration processes. The misfolding and subsequent aggregation of the protein into paired helical filaments that further form the tangles, lead to dysfunction of the protein with neuronal loss and cognitive decline. The aggregation of the protein then seems to be a causative factor of the neurodegeneration associated with AD. The hypothesis of an involvement of the membrane in modulating the misfolding and assembly of Tau into paired helical filaments attracts increasing interests. To provide more insight about how lipids can modulate the interactions with Tau, we have conducted a comprehensive Atomic Force Microscopy (AFM) study involving supported lipid bilayers of controlled compositions with the Tau microtubule-binding construct K18. Particularly, the effects of zwitterionic and negatively charged phospholipids on the interaction have been investigated. Deleterious solubilization effects have been evidenced on fluid zwitterionic membranes as well as an inability of K18 to fragment gel phases. The role of negative lipids in the aggregation of the peptide and the particular ability of phosphatidylinositol-4,5-bisphosphate (PIP₂) in inducing K18 fibrillization on membranes are also reported.

Unravelling the structural complexity of protein-lipid interactions with neutron reflectometry

Neutron reflectometry (NR) is a large-facility technique used to examine structure at interfaces. In this brief review an introduction to the utilisation of NR in the study of protein-lipid interactions is given. Cold neutron beams penetrate matter deeply, have low energies, wavelengths in the Ångstrom regime and are sensitive to light elements. High differential hydrogen sensitivity (between protium and deuterium) enables solution and sample isotopic labelling to be utilised to enhance or diminish the scattering signal of individual components within complex biological structures. The combination of these effects means NR can probe buried structures such as those at the solid-liquid interface and encode molecular level structural information on interfacial protein-lipid complexes revealing the relative distribution of components as well as the overall structure. Model biological membrane sample systems can be structurally probed to examine phenomena such as antimicrobial mode of activity, as well as structural and mechanistic properties peripheral/integral proteins within membrane complexes. Here, the example of the antimicrobial protein α1-purothionin binding to a model Gram negative bacterial outer membrane is used to highlight the utilisation of this technique, detailing how changes in the protein/lipid distributions across the membrane before and after the protein interaction can be easily encoded using hydrogen isotope labelling.

Switching Cytolytic Nanopores into Antimicrobial Fractal Ruptures by a Single Side Chain Mutation

Disruption of cell membranes is a fundamental host defense response found in virtually all forms of life. The molecular mechanisms vary but generally lead to energetically favored circular nanopores. Here, we report an elaborate fractal rupture pattern induced by a single side-chain mutation in ultrashort (8-11-mers) helical peptides, which otherwise form transmembrane pores. In contrast to known mechanisms, this mode of membrane disruption is restricted to the upper leaflet of the bilayer where it exhibits propagating fronts of peptide-lipid interfaces that are strikingly similar to viscous instabilities in fluid flow. The two distinct disruption modes, pores and fractal patterns, are both strongly antimicrobial, but only the fractal rupture is nonhemolytic. The results offer wide implications for elucidating differential membrane targeting phenomena defined at the nanoscale.

Simultaneous membrane binding of Annexin A4 and A5 suppresses 2D lattice formation while maintaining curvature induction

HYPOTHESIS

Annexin A4 and A5 (ANXA4, ANXA5), both shown to be required for efficient plasma membrane repair (PMR) in living cells, bind as trimers to anionic membranes in the presence of calcium. Both annexins induce membrane curvature and self-assemble into crystal arrays on membranes, observations that have been associated with PMR. However, in-vitro studies of annexins have traditionally been performed using single annexins, despite the recruitment of multiple annexins to the damage site in cells. Hence, we study the potential cooperativity of ANXA4 and ANXA5 during membrane binding.

EXPERIMENTS

Laser injury experiments were performed on MCF7 cells transfected to transiently express labelled ANXA4 and ANXA5 to study the localization of the proteins at the damage site. Using free-edged DOPC/DOPS (9:1) membranes we investigated the annexin-induced membrane rolling by fluorescence microscopy and the lateral arrangement of annexin trimers on the membrane surface by atomic force microscopy (AFM).

FINDING

ANXA4 and ANXA5 colocalise at the damage site of MCF7 cells during repair. A (1:1) mixture of ANXA4 and ANXA5 induces membrane rolling with a time constant intermediate between the value for the pure annexins. While binding of the pure annexins creates crystal lattices, the (1:1) mixture generates a random arrangement of trimers. Thus, curvature induction remains as a functional property of annexin mixtures in PMR rather than crystal formation.

The Whole Is Bigger than the Sum of Its Parts: Drug Transport in the Context of Two Membranes with Active Efflux

Cell envelope plays a dual role in the life of bacteria by simultaneously protecting it from a hostile environment and facilitating access to beneficial molecules. At the heart of this ability lie the restrictive properties of the cellular membrane augmented by efflux transporters, which preclude intracellular penetration of most molecules except with the help of specialized uptake mediators. Recently, kinetic properties of the cell envelope came into focus driven on one hand by the urgent need in new antibiotics and, on the other hand, by experimental and theoretical advances in studies of transmembrane transport. A notable result from these studies is the development of a kinetic formalism that integrates the Michaelis-Menten behavior of individual transporters with transmembrane diffusion and offers a quantitative basis for the analysis of intracellular penetration of bioactive compounds. This review surveys key experimental and computational approaches to the investigation of transport by individual translocators and in whole cells, summarizes key findings from these studies and outlines implications for antibiotic discovery. Special emphasis is placed on Gram-negative bacteria, whose envelope contains two separate membranes. This feature sets these organisms apart from Gram-positive bacteria and eukaryotic cells by providing them with full benefits of the synergy between slow transmembrane diffusion and active efflux.

Hybrid bilayer membranes on metallurgical polished aluminum

In this work we describe the functionalization of metallurgically polished aluminum surfaces yielding biomimetic electrodes suitable for probing protein/phospholipid interactions. The functionalization involves two simple steps: silanization of the aluminum and subsequent fusion of multilamellar vesicles which leads to the formation of a hybrid bilayer lipid membrane (hBLM). The vesicle fusion was followed in real-time by fast Fourier transform electrochemical impedance spectroscopy (FFT EIS). The impedance-derived complex capacitance of the hBLMs was approximately 0.61 µF cm⁻², a value typical for intact phospholipid bilayers. We found that the hBLMs can be readily disrupted if exposed to > 400 nM solutions of the pore-forming peptide melittin. However, the presence of cholesterol at 40% (mol) in hBLMs exhibited an inhibitory effect on the membrane-damaging capacity of the peptide. The melittin-membrane interaction was concentration dependent decreasing with concentration. The hBLMs on Al surface can be regenerated multiple times, retaining their dielectric and functional properties essentially intact.

Physical Properties and Reactivity of Microdomains in Phosphatidylinositol-Containing Supported Lipid Bilayer

We characterized the size, distribution, and fluidity of microdomains in a lipid bilayer containing phosphatidylinositol (PI) and revealed their roles during the two-dimensional assembly of a membrane deformation protein (FBP17). The morphology of the supported lipid bilayer (SLB) consisting of PI and phosphatidylcholine (PC) on a mica substrate was observed with atomic force microscope (AFM). Single particle tracking (SPT) was performed for the PI+PC-SLB on the mica substrate by using the diagonal illumination setup. The AFM topography showed that PI-derived submicron domains existed in the PI+PC-SLB. The spatiotemporal dependence of the lateral lipid diffusion obtained by SPT showed that the microdomain had lower fluidity than the surrounding region and worked as the obstacles for the lipid diffusion. We observed the two-dimensional assembly of FBP17, which is one of F-BAR family proteins included in endocytosis processes and has the function generating lipid bilayer tubules in vitro. At the initial stage of the FBP17 assembly, the PI-derived microdomain worked as a scaffold for the FBP17 adsorption, and the fluid surrounding region supplied FBP17 to grow the FBP17 domain via the lateral molecular diffusion. This study demonstrated an example clearly revealing the roles of two lipid microregions during the protein reaction on a lipid bilayer.

Coagulation-Inspired Direct Fibrinogen Assay Using Plasmonic Nanoparticles Functionalized with Red Blood Cell Membranes

The fast measurement of fibrinogen is essential in evaluating life-threatening sepsis and cardiovascular diseases. Here, we aim to utilize biomimetic plasmonic Au nanoparticles using red blood cell membranes (RBCM-AuNPs) and demonstrate nanoscale coagulation-inspired fibrinogen detection via cross-linking between RBCM-AuNPs. The proposed biomimetic RBCM-AuNPs are highly suitable for fibrinogen detection because hemagglutination, occurring in the presence of fibrinogen, induces a shift in the localized surface plasmon resonance of the NPs. Specifically, when the two ends of the fibrinogen protein are bound to receptors on separate RBCM-AuNPs, cross-linking of the RBCM-AuNPs occurs, yielding a corresponding plasmon shift within 10 min. This coagulation-inspired fibrinogen detection method, with a low sample volume, high selectivity, and high speed, could facilitate the diagnosis of sepsis and cardiovascular diseases.

Erythrocyte-camouflaged biosensor for α-hemolysin detection

Without appropriate treatment, Staphylococcus aureus (S. aureus) infection can cause life-threatening diseases (e.g., meningitis, pneumonia, bacteremia, and sepsis). However, a rapid and accurate point-of-care test for the infection remains challenging. The bacterium secretes α-hemolysin (Hla), which spontaneously binds to the cell membrane of erythrocyte, and eventually lyses the cell via pore formation. Taking advantage of this phenomenon, we apply the erythrocyte membrane (EM) extracted from human whole blood as a novel bioreceptor for detecting Hla, fabricating erythrocyte-camouflaged biosensors (ECB) by coating EM onto electrochemical impedance electrodes. We verify the existence of EM on the ECB by using confocal microscopy and atomic force microscopy. We demonstrate that ECBs sensitively detect Hla spiked in phosphate buffer saline and human serum. Also, the sensor shows higher sensitivity to Hla than major blood proteins, such as human serum albumin, fibrinogen, and gamma globulin. Specifically, the signal intensities for Hla are 8.8-12.7 times higher than those in the same concentration of those blood proteins. The detection limit of the ECB for Hla is 1.9 ng/ml while the dynamic range is 0.0001-1 mg/ml. Finally, we validate the constant sensing performance of ECB with 99.0 ± 5.6% accuracy for 35 days of storage.

Protective Role of Sphingomyelin in Eye Lens Cell Membrane Model against Oxidative Stress

In the eye lens cell membrane, the lipid composition changes during the aging process: the proportion of sphingomyelins (SM) increases, that of phosphatidylcholines decreases. To investigate the protective role of the SMs in the lens cell membrane against oxidative damage, analytical techniques such as electrochemistry, high-resolution mass spectrometry (HR-MS), and atomic force microscopy (AFM) were applied. Supported lipid bilayers (SLB) were prepared to mimic the lens cell membrane with different fractions of PLPC/SM (PLPC: 1-palmitoyl-2-linoleoyl-sn-glycero-3-phosphocholine). The SLBs were treated with cold physical plasma. A protective effect of 30% and 44% in the presence of 25%, and 75% SM in the bilayer was observed, respectively. PLPC and SM oxidation products were determined via HR-MS for SLBs after plasma treatment. The yield of fragments gradually decreased as the SM ratio increased. Topographic images obtained by AFM of PLPC-bilayers showed SLB degradation and pore formation after plasma treatment, no degradation was observed in PLPC/SM bilayers. The results of all techniques confirm the protective role of SM in the membrane against oxidative damage and support the idea that the SM content in lens cell membrane is increased during aging in the absence of effective antioxidant systems to protect the eye from oxidative damage and to prolong lens transparency.

AFM imaging of pore forming proteins

Pore forming proteins are released as water-soluble monomers that form-mostly oligomeric-pores in target membranes. Our understanding of such pore formation relies in part on the direct visualization of their assemblies on and in the membrane. Here, we discuss the application of atomic force microscopy (AFM) to visualize and understand membrane pore formation, illustrated specifically by studies of proteins of the MACPF/CDC superfamily on supported lipid bilayers. Besides detailed protocols, we also point out common imaging artefacts and strategies to avoid them, and briefly outline how AFM can be effectively used in conjunction with other methods.

Lipid Composition of Liposomal Membrane Largely Affects Its Transport and Uptake through Small Intestinal Epithelial Cell Models

Lipid composition of liposomal bilayer should alter the cell response for permeability, transport, and uptake in small intestine. This work was done to investigate the transport and uptake of liposomes composed of docosahexaenoic acid-enriched phosphatidylcholine (PtdCho), phosphatidylserine (PtdSer), and sulfoquinovosyl diacylglycerol (SQDG) derived from marine products on multilamellar vesicles (MLV) in small intestinal epithelial cell models. The results showed that addition of PtdSer and SQDG as liposomal bilayer could improve the efficiency entrapment of liposomes. The liposomes containing PtdSer showed higher transport and uptake through both Caco-2 cell and M cell monolayers as compared to PtdCho-MLV. SQDG-containing liposomes exhibited only higher transport through M cell monolayer, while its uptake effect was higher both in Caco-2 cell and M cell monolayers. The results of experiments done with endocytosis inhibitors indicated that PtdCho-MLV must be transported via macropinocytosis and uptaken by phagocytosis in M cell monolayer model. PtdCho/PtdSer-MLV and PtdCho/SQDG-MLV might be transported and uptaken through M cell monolayer by phagocytosis. The result also indicated that PtdCho/SQDG-MLV could open the tight junction of small intestinal epithelial cell monolayers. Furthermore, our findings demonstrated that the surface status of cholesterol-containing liposomes were smooth, but they did not affect their transport and uptake through Caco-2 cell and M cell monolayers.

A combination of electrochemistry and mass spectrometry to monitor the interaction of reactive species with supported lipid bilayers

Reactive oxygen and nitrogen species (RONS), e.g. generated by cold physical plasma (CPP) or photodynamic therapy, interfere with redox signaling pathways of mammalian cells, inducing downstream consequences spanning from migratory impairment to apoptotic cell death. However, the more austere impact of RONS on cancer cells remains yet to be clarified. In the present study, a combination of electrochemistry and high-resolution mass spectrometry was developed to investigate the resilience of solid-supported lipid bilayers towards plasma-derived reactive species in dependence of their composition. A 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipid bilayer was undisturbed by 200 µM H2O2 (control) but showed full permeability after CPP treatment and space-occupying oxidation products such as PoxnoPC, PAzePC, and POPC hydroperoxide were found. Electron paramagnetic resonance spectroscopy demonstrated the presence of hydroxyl radicals and superoxide anion/hydroperoxyl radicals during the treatment. In contrast, small amounts of the intramembrane antioxidant coenzyme Q10 protected the bilayer to 50% and LysoPC was the only POPC derivative found, confirming the membrane protective effect of Q10. Such, the lipid membrane composition including the presence of antioxidants determines the impact of pro-oxidant signals. Given the differences in membrane composition of cancer and healthy cells, this supports the application of cold physical plasma for cancer treatment. In addition, the developed model using the combination of electrochemistry and mass spectrometry could be a promising method to study the effect of reactive species or mixes thereof generated by chemical or physical sources.

Lipid bilayers: Phase behavior and nanomechanics

Lipid membranes are involved in many physiological processes like recognition, signaling, fusion or remodeling of the cell membrane or some of its internal compartments. Within the cell, they are the ultimate barrier, while maintaining the fluidity or flexibility required for a myriad of processes, including membrane protein assembly. The physical properties of in vitro model membranes as model cell membranes have been extensively studied with a variety of techniques, from classical thermodynamics to advanced modern microscopies. Here we review the nanomechanics of solid-supported lipid membranes with a focus in their phase behavior. Relevant information obtained by quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM) as complementary techniques in the nano/mesoscale interface is presented. Membrane morphological and mechanical characterization will be discussed in the framework of its phase behavior, phase transitions and coexistence, in simple and complex models, and upon the presence of cholesterol.

Flowering Poration-A Synergistic Multi-Mode Antibacterial Mechanism by a Bacteriocin Fold

Bacteriocins are a distinct family of antimicrobial proteins postulated to porate bacterial membranes. However, direct experimental evidence of pore formation by these proteins is lacking. Here we report a multi-mode poration mechanism induced by four-helix bacteriocins, epidermicin NI01 and aureocin A53. Using a combination of crystallography, spectroscopy, bioassays, and nanoscale imaging, we established that individual two-helix segments of epidermicin retain antibacterial activity but each of these segments adopts a particular poration mode. In the intact protein these segments act synergistically to balance out antibacterial and hemolytic activities. The study sets a precedent of multi-mode membrane disruption advancing the current understanding of structure-activity relationships in pore-forming proteins.

•

Bacteriocins are antibacterial proteins believed to form pores in bacterial membranes

•

A multi-helix bacteriocin fold induces a multi-mode poration mechanism

•

Each of two-helix segments of the bacteriocin adopts a particular poration mode

•

These segments act synergistically balancing out antibacterial and hemolytic activities

A horizontal-type scanning near-field optical microscope with torsional mode operation toward high-resolution and non-destructive imaging of soft materials

We design and build a horizontal-type aperture based scanning near-field optical microscope (a-SNOM) with superior mechanical stability toward high-resolution and non-destructive topographic and optical imaging. We adopt the torsional mode in AFM (atomic force microscopy) operation to achieve a better force sensitivity and a higher topographic resolution when using pyramidal a-SNOM tips. The performance and stability of the AFM are evaluated through single-walled carbon nanotube and poly(3-hexyl-thiophene) nanowire samples. An optical resolution of 93 nm is deduced from the a-SNOM imaging of a metallic grating. Finally, a-SNOM fluorescence imaging of soft lipid domains is successfully achieved without sample damage by our horizontal-type a-SNOM instrument with torsional mode AFM operation.

Gold nanoparticles interacting with synthetic lipid rafts: an AFM investigation

Inorganic nanoparticles (NPs) represent promising examples of engineered nanomaterials, providing interesting biomedical solutions in several fields, like therapeutics and diagnostics. Despite the extensive number of investigations motivated by their remarkable potential for nanomedicinal applications, the interactions of NPs with biological interfaces are still poorly understood. The effect of NPs on living organisms is mediated by biological barriers, such as the cell plasma membrane, whose lateral heterogeneity is thought to play a prominent role in NPs adsorption and uptake pathways. In particular, biological membranes feature the presence of rafts, that is segregated lipid micro and/or nanodomains in the so-called liquid ordered phase (L_o ), immiscible with the surrounding liquid disordered phase (L_d ). Rafts are involved in various biological functions and act as sites for the selective adsorption of materials on the membrane. Indeed, the thickness mismatch present along their boundaries generates energetically favourable conditions for the adsorption of NPs. Despite its clear implications in NPs internalisation processes and cytotoxicity, a direct proof of the selective adsorption of NPs along the rafts' boundaries is still missing to date. Here we use multicomponent supported lipid bilayers (SLBs) as reliable synthetic models, reproducing the nanometric lateral heterogeneity of cell membranes. After being characterised by atomic force microscopy (AFM) and neutron reflectivity (NR), multidomain SLBs are challenged by prototypical inorganic nanoparticles, that is citrated gold nanoparticles (AuNPs), under simplified and highly controlled conditions. By exploiting AFM, we demonstrate that AuNPs preferentially target lipid phase boundaries as adsorption sites. The herein reported study consolidates and extends the fundamental knowledge on NPs-membrane interactions, which constitute a key aspect to consider when designing NPs-related biomedical applications. LAY DESCRIPTION: Inorganic nanoparticles (NPs) represent promising examples of engineered nanomaterials, offering interesting biomedical solutions in multiple fields like therapeutics and diagnostics. Despite being extensively investigated due to their remarkable potential for nanomedicinal applications, the interaction of NPs with biological systems is in several cases still poorly understood. The interaction of NPs with living organisms is mediated by biological barriers, such as the cell plasma membrane. Supported lipid bilayers (SLBs) represent suitable synthetic membrane models for studying the physicochemical properties of natural interfaces and their interaction with inorganic nanomaterials under simplified and controlled conditions. Recently, multicomponent SLBs were developed in order to mimic the lateral heterogeneity of most biological membranes. In particular, biological membranes feature the presence of rafts, that is segregated lipid micro and/or nanodomains, enriched in cholesterol, sphingomyelin, saturated glycerophospholipids and glycosphingolipids: these lipids segregate in the so-called liquid-ordered phase (L_o ), characterised by a high molecular packing degree, which promotes the phase separation from the surrounding liquid-crystalline (disordered, L_d ) phase, where the intermolecular mobility is increased. Rafts are thought to participate in the formation and targeting of nano-sized biogenic lipid vesicles and are also actively involved in multiple membrane processes. Indeed, L_o -L_d phase boundaries represent high energy areas, providing active sites for the preferential adsorption of external material. The selective adsorption of NPs along the phase boundaries of rafted membranes has been theorised and indirectly probed by different research groups; however, a direct proof of this phenomenon is still missing to date. We herein exploit atomic force microscopy (AFM) to directly visualise the preferential adsorption of gold nanoparticles (AuNPs) along the phase boundaries of multicomponent SLBs (previously characterised by neutron reflectivity), obtained from synthetic vesicles containing both an L_d and an L_o phase. The quantitative localisation and morphometry of AuNPs adsorbed on the SLB reveal important information on their interaction with the lipid matrix and directly prove the already theorised differential NPs-lipid interaction at the phase boundaries. The presented results could help the development of future NP-based applications, involving NPs adsorption on membranes with nanoscale phase segregations.

To Hop or not to Hop: Exceptions in the FCS Diffusion Law

Diffusion obstacles in membranes have not been directly visualized because of fast membrane dynamics and the occurrence of subresolution molecular complexes. To understand the obstacle characteristics, mobility-based methods are often used as an indirect way of assessing the membrane structure. Molecular movement in biological plasma membranes is often characterized by anomalous diffusion, but the exact underlying mechanisms are still elusive. Imaging total internal reflection fluorescence correlation spectroscopy (ITIR-FCS) is a well-established mobility-based method that provides spatially resolved diffusion coefficient maps and is combined with FCS diffusion law analysis to examine subresolution membrane organization. In recent years, although FCS diffusion law analysis has been instrumental in providing new insights into the membrane structure below the optical diffraction limit, there are certain exceptions and anomalies that require further clarification. To this end, we correlate the membrane structural features imaged by atomic force microscopy (AFM) with the dynamics measured using ITIR-FCS. We perform ITIR-FCS measurements on supported lipid bilayers (SLBs) of various lipid compositions to characterize the anomalous diffusion of lipid molecules in distinct obstacle configurations, along with the high-resolution imaging of the membrane structures with AFM. Furthermore, we validate our experimental results by performing simulations on image grids with experimentally determined obstacle configurations. This study demonstrates that FCS diffusion law analysis is a powerful tool to determine membrane heterogeneities implied from dynamics measurements. Our results corroborate the commonly accepted interpretations of imaging FCS diffusion law analysis, and we show that exceptions happen when domains reach the percolation threshold in a biphasic membrane and a network of domains behaves rather like a meshwork, resulting in hop diffusion.

Prediction of paclitaxel pharmacokinetic based on in vitro studies: Interaction with membrane models and human serum albumin

Interactions of paclitaxel (PTX) with models mimicking biological interfaces (lipid membranes and serum albumin, HSA) were investigated to test the hypothesis that the set of in vitro assays proposed can be used to predict some aspects of drug pharmacokinetics (PK). PTX membrane partitioning was studied by derivative spectrophotometry; PTX effect on membrane biophysics was evaluated by dynamic light scattering, fluorescence anisotropy, atomic force microscopy and synchrotron small/wide-angle X-ray scattering; PTX distribution/molecular orientation in membranes was assessed by steady-state/time-resolved fluorescence and computer simulations. PTX binding to HSA was studied by fluorescence quenching, derivative spectrophotometry and dynamic/electrophoretic light scattering. PTX high membrane partitioning is consistent with its efficacy crossing cellular membranes and its off-target distribution. PTX is closely located in the membrane phospholipids headgroups, also interacting with the hydrophobic chains, and causes a major distortion of the alignment of the membrane phospholipids, which, together with its fluidizing effect, justifies some of its cellular toxic effects. PTX binds strongly to HSA, which is consistent with its reduced distribution in target tissues and toxicity by bioaccumulation. In conclusion, the described set of biomimetic models and techniques has the potential for early prediction of PK issues, alerting for the required drug optimizations, potentially minimizing the number of animal tests used in the drug development process.

Supported Lipid Bilayer Formation: Beyond Vesicle Fusion

Supported lipid bilayers (SLBs) are cell-membrane-mimicking platforms that can be formed on solid surfaces and integrated with a wide range of surface-sensitive measurement techniques. SLBs are useful for unravelling details of fundamental membrane biology and biophysics as well as for various medical, biotechnology, and environmental science applications. Thus, there is high interest in developing simple and robust methods to fabricate SLBs. Currently, vesicle fusion is a popular method to form SLBs and involves the adsorption and spontaneous rupture of lipid vesicles on a solid surface. However, successful vesicle fusion depends on high-quality vesicle preparation, and it typically works with a narrow range of material supports and lipid compositions. In this Feature Article, we summarize current progress in developing two new SLB fabrication techniques termed the solvent-assisted lipid bilayer (SALB) and bicelle methods, which have compelling advantages such as simple sample preparation and compatibility with a wide range of material supports and lipid compositions. The molecular self-assembly principles underpinning the two strategies and important experimental parameters are critically discussed, and recent application examples are presented. Looking forward, we envision that these emerging SLB fabrication strategies can be widely adopted by specialists and nonspecialists alike, paving the way to enriching our understanding of lipid membrane properties and realizing new application possibilities.

A bio-inspired highly selective enzymatic glucose sensor using a red blood cell membrane

Red blood cell membrane (RBCM) was coated onto the enzymatic glucose sensor. The permeability of RBCM was optimized by controlling the thickness. Intriguingly, the sensor was highly accurate, despite the existence of various interfering molecules.

Visualization and measurement of the local absorption coefficients of single bilayer phospholipid membranes using scanning near-field optical microscopy

Here we report the results of shear-mode thicknesses and absorption coefficient measurements made on neat membranes using scanning near-field optical microscopy (SNOM). Biomimic neat membranes composed of two different types of phoshpholipid molecules: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2- dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) were found to exhibit different absorption coefficients under the SNOM. The localization of the lipids could be identified and correlated to the morphology of the membrane domains indicating that SNOM can be an effective and accurate approach for the label-free characterization of the structure-function relationships in cell membranes.

Imaging live bacteria at the nanoscale: comparison of immobilisation strategies

Atomic force microscopy (AFM) provides an effective, label-free technique enabling the imaging of live bacteria under physiological conditions with nanometre precision. However, AFM is a surface scanning technique, and the accuracy of its performance requires the effective and reliable immobilisation of bacterial cells onto substrates. Here, we compare the effectiveness of various chemical approaches to facilitate the immobilisation of Escherichia coli onto glass cover slips in terms of bacterial adsorption, viability and compatibility with correlative imaging by fluorescence microscopy. We assess surface functionalisation using gelatin, poly-l-lysine, Cell-Tak™, and Vectabond®. We describe how bacterial immobilisation, viability and suitability for AFM experiments depend on bacterial strain, buffer conditions and surface functionalisation. We demonstrate the use of such immobilisation by AFM images that resolve the porin lattice on the bacterial surface; local degradation of the bacterial cell envelope by an antimicrobial peptide (Cecropin B); and the formation of membrane attack complexes on the bacterial membrane.

Assembly of α-synuclein aggregates on phospholipid bilayers

The spontaneous self-assembly of α-synuclein (α-syn) into aggregates of different morphologies is associated with the development of Parkinson's disease. However, the mechanism behind the spontaneous assembly remains elusive. The current study shows a novel effect of phospholipid bilayers on the assembly of the α-syn aggregates. Using time-lapse atomic force microscopy, it was discovered that α-syn assembles into aggregates on bilayer surfaces, even at the nanomolar concentration range. The efficiency of the aggregation process depends on the membrane composition, with the greatest efficiency observed for of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine (POPS). Importantly, assembled aggregates can dissociate from the surface, suggesting that on-surface aggregation is a mechanism by which pathological aggregates may be produced. Computational modeling revealed that dimers of α-syn assembled rapidly, through the membrane-bound monomer on POPS bilayer, due to an aggregation-prone orientation of α-syn. Interaction of α-syn with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) leads to a binding mode that does not induce a fast assembly of the dimer. Based on these findings, we propose a model in which the interaction of α-syn with membranes plays a critical role initiating the formation of α-syn aggregates and the overall aggregation process.

Helminth Defense Molecules as Design Templates for Membrane Active Antibiotics

A design template for membrane active antibiotics against microbial and tumor cells is described. The template is an amino acid sequence that combines the properties of helminth defense molecules, which are not cytolytic, with the properties of host-defense peptides, which disrupt microbial membranes. Like helminth defense molecules, the template folds into an amphipathic helix in both mammalian host and microbial phospholipid membranes. Unlike these molecules, the template exhibits antimicrobial and anticancer properties that are comparable to those of antimicrobial and anticancer antibiotics. The selective antibiotic activity of the template builds upon a functional synergy between three distinctive faces of the helix, which is in contrast to two faces of membrane-disrupting amphipathic structures. This synergy enables the template to adapt pore formation mechanisms according to the nature of the target membrane, inducing the lysis of microbial and tumor cells.