Revisiting lab-on-a-chip technology for drug discovery

Reconstitution of human tissue barrier function for precision and personalized medicine

Tissue barriers in a body, well known as tissue-to-tissue interfaces represented by endothelium of the blood vessels or epithelium of organs, are essential for maintaining physiological homeostasis by regulating molecular and cellular transports. It is crucial for predicting drug response to understand physiology of tissue barriers through which drugs are absorbed, distributed, metabolized and excreted. Since the FDA Modernization Act 2.0, which prompts the inception of alternative technologies for animal models, tissue barrier chips, one of the applications of organ-on-a-chip or microphysiological system (MPS), have only recently been utilized in the context of drug development. Recent advancements in stem cell technology have brightened the prospects for the application of tissue barrier chips in personalized medicine. In past decade, designing and engineering these microfluidic devices, and demonstrating the ability to reconstitute tissue functions were main focus of this field. However, the field is now advancing to the next level of challenges: validating their utility in drug evaluation and creating personalized models using patient-derived cells. In this review, we briefly introduce key design parameters to develop functional tissue barrier chip, explore the remarkable recent progress in the field of tissue barrier chips and discuss future perspectives on realizing personalized medicine through the utilization of tissue barrier chips.

The integrated on-chip isolation and detection of circulating tumour cells

Circulating tumour cells (CTCs) are cancer cells shed from a primary tumour which intravasate into the blood stream and have the potential to extravasate into distant tissues, seeding metastatic lesions. As such, they can offer important insight into cancer progression with their presence generally associated with a poor prognosis. The detection and enumeration of CTCs is, therefore, critical to guiding clinical decisions during treatment and providing information on disease state. CTC isolation has been investigated using a plethora of methodologies, of which immunomagnetic capture and microfluidic size-based filtration are the most impactful to date. However, the isolation and detection of CTCs from whole blood comes with many technical barriers, such as those presented by the phenotypic heterogeneity of cell surface markers, with morphological similarity to healthy blood cells, and their low relative abundance (∼1 CTC/1 billion blood cells). At present, the majority of reported methods dissociate CTC isolation from detection, a workflow which undoubtedly contributes to loss from an already sparse population. This review focuses on developments wherein isolation and detection have been integrated into a single-step, microfluidic configuration, reducing CTC loss, increasing throughput, and enabling an on-chip CTC analysis with minimal operator intervention. Particular attention is given to immune-affinity, microfluidic CTC isolation, coupled to optical, physical, and electrochemical CTC detection (quantitative or otherwise).

Lab on chip for testing of repurposed drugs

The lab-on-chip technique broadly comprises of microfluidics and aims to progress multidimensionally by changing the outlook of medicine and pharmaceuticals as it finds it roots in miniaturization. Moreover, microfluidics facilitates precise physiological simulation and possesses biological system-mimicking capabilities for drug development and repurposing. Thus, organs on chip could pave a revolutionary pathway in the field of drug development and repurposing by reducing animal testing and improving drug repurposing.

A Miniaturized Wireless Micropump Enabled by Confined Acoustic Streaming

Miniaturization of health care, biomedical, and chemical systems is highly desirable for developing point-of-care testing (POCT) technologies. In system miniaturization, micropumps represent one of the major bottlenecks due to their undesirable pumping performance at such small sizes. Here, we developed a microelectromechanical system fabricated acoustic micropump based on an ultrahigh-frequency bulk acoustic wave resonator. The concept of an inner-boundary-confined acoustic jet was introduced to facilitate unidirectional flow. Benefitting from the high resonant frequency and confined acoustic streaming, the micropump reaches 32.620 kPa/cm3 (pressure/size) and 11.800 ml/min∙cm3 (flow rate/size), showing a 2-order-of-magnitude improvement in the energy transduction efficiency compared with the existing acoustic micropumps. As a proof of concept, the micropump was constructed as a wearable and wirelessly powered integrated drug delivery system with a size of only 9×9×9 mm3 and a weight of 1.16 g. It was demonstrated for ocular disease treatment through animal experimentation and a human pilot test. With superior pumping performance, miniaturized pump size, ultralow power consumption, and complementary metal-oxide-semiconductor compatibility, we expect it to be readily applied to various POCT applications including clinical diagnosis, prognosis, and drug delivery systems.

Biomarkers in Acute Myocarditis and Chronic Inflammatory Cardiomyopathy: An Updated Review of the Literature

Myocarditis is a disease caused by cardiac inflammation that can progress to dilated cardiomyopathy, heart failure, and eventually death. Several etiologies, including autoimmune, drug-induced, and infectious, lead to inflammation, which causes damage to the myocardium, followed by remodeling and fibrosis. Although there has been an increasing understanding of pathophysiology, early and accurate diagnosis, and effective treatment remain challenging due to the high heterogeneity. As a result, many patients have poor prognosis, with those surviving at risk of long-term sequelae. Current diagnostic methods, including imaging and endomyocardial biopsy, are, at times, expensive, invasive, and not always performed early enough to affect disease progression. Therefore, the identification of accurate, cost-effective, and prognostically informative biomarkers is critical for screening and treatment. The review then focuses on the biomarkers currently associated with these conditions, which have been extensively studied via blood tests and imaging techniques. The information within this review was retrieved through extensive literature research conducted on major publicly accessible databases and has been collated and revised by an international panel of experts. The biomarkers discussed in the article have shown great promise in clinical research studies and provide clinicians with essential tools for early diagnosis and improved outcomes.

The technology, opportunities, and challenges of Synthetic Biological Intelligence

Integrating neural cultures developed through synthetic biology methods with digital computing has enabled the early development of Synthetic Biological Intelligence (SBI). Recently, key studies have emphasized the advantages of biological neural systems in some information processing tasks. However, neither the technology behind this early development, nor the potential ethical opportunities or challenges, have been explored in detail yet. Here, we review the key aspects that facilitate the development of SBI and explore potential applications. Considering these foreseeable use cases, various ethical implications are proposed. Ultimately, this work aims to provide a robust framework to structure ethical considerations to ensure that SBI technology can be both researched and applied responsibly.

Acoustic tweezers for high-throughput single-cell analysis

Acoustic tweezers provide an effective means for manipulating single cells and particles in a high-throughput, precise, selective and contact-free manner. The adoption of acoustic tweezers in next-generation cellular assays may advance our understanding of biological systems. Here we present a comprehensive set of instructions that guide users through device fabrication, instrumentation setup and data acquisition to study single cells with an experimental throughput that surpasses traditional methods, such as atomic force microscopy and micropipette aspiration, by several orders of magnitude. With acoustic tweezers, users can conduct versatile experiments that require the trapping, patterning, pairing and separation of single cells in a myriad of applications ranging across the biological and biomedical sciences. This procedure is widely generalizable and adaptable for investigations in materials and physical sciences, such as the spinning motion of colloids or the development of acoustic-based quantum simulations. Overall, the device fabrication requires ~12 h, the experimental setup of the acoustic tweezers requires 1-2 h and the cell manipulation experiment requires ~30 min to complete. Our protocol is suitable for use by interdisciplinary researchers in biology, medicine, engineering and physics.

Generation of Photopolymerized Microparticles Based on PEGDA Hydrogel Using T-Junction Microfluidic Devices: Effect of the Flow Rates

The formation of microparticles (MPs) of biocompatible and biodegradable hydrogels such as polyethylene glycol diacrylate (PEGDA) utilizing microfluidic devices is an attractive option for entrapment and encapsulation of active principles and microorganisms. Our research group has presented in previous studies a formulation to produce these hydrogels with adequate physical and mechanical characteristics for their use in the formation of MPs. In this work, hydrogel MPs are formed based on PEGDA using a microfluidic device with a T-junction design, and the MPs become hydrogel through a system of photopolymerization. The diameters of the MPs are evaluated as a function of the hydrodynamic condition flow rates of the continuous (Qc) and disperse (Qd) phases, measured by optical microscopy, and characterized through scanning electron microscopy. As a result, the following behavior is found: the diameter is inversely proportional to the increase in flow in the continuous phase (Qc), and it has a significant statistical effect that is greater than that in the flow of the disperse phase (Qd). While the diameter of the MPs is proportional to Qd, it does not have a significant statistical effect on the intervals of flow studied. Additionally, the MPs' polydispersity index (PDI) was measured for each experimental hydrodynamic condition, and all values were smaller than 0.05, indicating high homogeneity in the MPs. The microparticles have the potential to entrap pharmaceuticals and microorganisms, with possible pharmacological and bioremediation applications.

A sinterless, low-temperature route to 3D print nanoscale optical-grade glass

Three-dimensional (3D) printing of silica glass is dominated by techniques that rely on traditional particle sintering. At the nanoscale, this limits their adoption within microsystem technology, which prevents technological breakthroughs. We introduce the sinterless, two-photon polymerization 3D printing of free-form fused silica nanostructures from a polyhedral oligomeric silsesquioxane (POSS) resin. Contrary to particle-loaded sacrificial binders, our POSS resin itself constitutes a continuous silicon-oxygen molecular network that forms transparent fused silica at only 650°C. This temperature is 500°C lower than the sintering temperatures for fusing discrete silica particles to a continuum, which brings silica 3D printing below the melting points of essential microsystem materials. Simultaneously, we achieve a fourfold resolution enhancement, which enables visible light nanophotonics. By demonstrating excellent optical quality, mechanical resilience, ease of processing, and coverable size scale, our material sets a benchmark for micro- and nano-3D printing of inorganic solids.

The next generation of hybrid microfluidic/integrated circuit chips: recent and upcoming advances in high-speed, high-throughput, and multifunctional lab-on-IC systems

Since the field's inception, pioneers in microfluidics have made significant progress towards realizing complete lab-on-chip systems capable of sophisticated sample analysis and processing. One avenue towards this goal has been to join forces with the related field of microelectronics, using integrated circuits (ICs) to perform on-chip actuation and sensing. While early demonstrations focused on using microfluidic-IC hybrid chips to miniaturize benchtop instruments, steady advancements in the field have enabled a new generation of devices that expand past miniaturization into high-performance applications that would not be possible without IC hybrid integration. In this review, we identify recent examples of labs-on-chip that use high-resolution, high-speed, and multifunctional electronic and photonic chips to expand the capabilities of conventional sample analysis. We focus on three particularly active areas: a) high-throughput integrated flow cytometers; b) large-scale microelectrode arrays for stimulation and multimodal sensing of cells over a wide field of view; c) high-speed biosensors for studying molecules with high temporal resolution. We also discuss recent advancements in IC technology, including on-chip data processing techniques and lens-free optics based on integrated photonics, that are poised to further advance microfluidic-IC hybrid chips.

NGN2-based neuronal programming of hiPSCs in an automated microfluidic platform

The generation of induced pluripotent stem cells (iPSCs) via somatic cell reprogramming allowed to have an unlimited in vitro source of patient-specific cells. This achievement has introduced a new revolutionary way to create human in vitro models and to study human diseases starting from patient's own cells, especially important for inaccessible tissues like the brain. Recently, lab-on-a-chip technology has opened new reliable alternatives to conventional in vitro models able to replicate key aspects of human physiology, thanks to the intrinsic high surface-area-to-volume ratio, which allows fine control of the cellular microenvironment. The development of automated microfluidic platforms allowed the implementation of this technology to perform high-throughput, standardized and parallelized assays, suitable for drug screenings and developing new therapeutic approaches in a cost-effective way. However, the major challenges in the broad application of automated lab-on-a-chip in biological research are the lack of production robustness and ease of use of the devices. Here, we present an automated microfluidic platform able to host the rapid conversion of human iPSCs (hiPSCs) into neurons via viral-mediated overexpression of Neurogenin 2 (NGN2) in a user-friendly manner. The design of the platform, built with multilayer soft-lithography techniques, shows easiness in the fabrication and assembly thanks to the simple geometry and experimental reproducibility at the same time. All operations are managed automatically, from the cell seeding, medium change, doxycycline-mediated neuronal induction, selection of the genetically engineered cells, and analysis of the output of differentiation, including immunofluorescence assay. Our results show a high-throughput, efficient and homogenous conversion of hiPSCs into neurons in 10 days, characterized by the expression of the mature neuronal marker MAP2 and calcium signaling. The neurons-on-chip model here described represents a fully automated loop system able to address the challenges in the field of neurological diseases modelling in vitro and improve current preclinical models.

Polymeric and Paper-Based Lab-on-a-Chip Devices in Food Safety: A Review

Food quality and safety are important to protect consumers from foodborne illnesses. Currently, laboratory scale analysis, which takes several days to complete, is the main way to ensure the absence of pathogenic microorganisms in a wide range of food products. However, new methods such as PCR, ELISA, or even accelerated plate culture tests have been proposed for the rapid detection of pathogens. Lab-on-chip (LOC) devices and microfluidics are miniaturized devices that can enable faster, easier, and at the point of interest analysis. Nowadays, methods such as PCR are often coupled with microfluidics, providing new LOC devices that can replace or complement the standard methods by offering highly sensitive, fast, and on-site analysis. This review's objective is to present an overview of recent advances in LOCs used for the identification of the most prevalent foodborne and waterborne pathogens that put consumer health at risk. In particular, the paper is organized as follows: first, we discuss the main fabrication methods of microfluidics as well as the most popular materials used, and then we present recent literature examples for LOCs used for the detection of pathogenic bacteria found in water and other food samples. In the final section, we summarize our findings and also provide our point of view on the challenges and opportunities in the field.

Worm Generator: A System for High-Throughput in Vivo Screening

Large-scale screening of molecules in organisms requires high-throughput and cost-effective evaluating tools during preclinical development. Here, a novel in vivo screening strategy combining hierarchically structured biohybrid triboelectric nanogenerators (HB-TENGs) arrays with computational bioinformatics analysis for high-throughput pharmacological evaluation using Caenorhabditis elegans is described. Unlike the traditional methods for behavioral monitoring of the animals, which are laborious and costly, HB-TENGs with micropillars are designed to efficiently convert animals' behaviors into friction deformation and result in a contact-separation motion between two triboelectric layers to generate electrical outputs. The triboelectric signals are recorded and extracted to various bioinformation for each screened compound. Moreover, the information-rich electrical readouts are successfully demonstrated to be sufficient to predict a drug's identity by multiple-Gaussian-kernels-based machine learning methods. This proposed strategy can be readily applied to various fields and is especially useful in in vivo explorations to accelerate the identification of novel therapeutics.

Lung-on-chip microdevices to foster pulmonary drug discovery

Respiratory diseases account for unprecedented mortality owing to a lack of personalized or insufficient therapeutic interventions. Fostering pulmonary research into managing pulmonary threat requires a potential alternative approach that can mimick the in vivo complexities of the human body. The in vitro miniaturized bionic simulation of the lung holds great potential in the quest for a successful therapeutic intervention. This review discusses the emerging roles of lung-on-chip microfluidic simulator devices in fostering translational pulmonary drug discovery and personalized medicine. This review also explicates how the lung-on-chip model emulates the breathing patterns, elasticity, and vascularization of lungs in creating a 3D pulmonary microenvironment.

A Self-Assembly Method for Creating Vascularized Tumor Explants Using Biomaterials for 3D Culture

Validation of potential therapeutic targets in cancer requires functional live assays that recapitulate the biology, anatomy, and physiology of human tumors. We present a methodology for maintaining mouse and patient tumor samples ex vivo for in vitro drug-screening as well as for the guidance of patient-specific chemotherapies. The harvested tumor biopsy, excised from mice or patients, is integrated into a support tissue that includes extended stroma and vasculature. The methodology is more representative than tissue culture assays, faster than patient-derived xenograft models, easy to implement, amenable to high-throughput assays and does not carry the ethical issues or expense associated with animal studies. Our physiologically relevant model can be successfully used for high-throughput drug screening.

Enhanced Accumulation of Colloidal Particles in Microgrooved Channels via Diffusiophoresis and Steady-State Electrolyte Flows

The delivery of colloidal particles in dead-end microstructures is very challenging, since these geometries do not allow net flows of particle-laden fluids; meanwhile, diffusive transport is slow and inefficient. Recently, we introduced a novel particle manipulation strategy, based on diffusiophoresis, whereby the salt concentration gradient between parallel electrolyte streams in a microgrooved channel induces the rapid (i.e., within minutes) and reversible accumulation, retention, and removal of colloidal particles in the microgrooves. In this study, we investigated the effects of salt contrast and groove depth on the accumulation process in silicon microgrooves and determined the experimental conditions that lead to a particle concentration peak of more than four times the concentration in the channel bulk. Also, we achieved an average particle concentration in the grooves of more than twice the concentration in the flowing streams and almost 2 orders of magnitude larger than the average concentration in the grooves in the absence of a salt concentration gradient. Analytical sufficient and necessary conditions for particle accumulation are also derived. Finally, we successfully tested the accumulation process in polydimethylsiloxane microgrooved channels, as they are less expensive to fabricate than silicon microgrooved substrates. The controlled and enhanced accumulation of colloidal particles in dead-end structures by solute concentration gradients has potential applications in soft matter and living systems, such as drug delivery, synthetic biology, and on-chip diagnostics.

Application of Microfluidics in Drug Development from Traditional Medicine

While there are many clinical drugs for prophylaxis and treatment, the search for those with low or no risk of side effects for the control of infectious and non-infectious diseases is a dilemma that cannot be solved by today's traditional drug development strategies. The need for new drug development strategies is becoming increasingly important, and the development of new drugs from traditional medicines is the most promising strategy. Many valuable clinical drugs have been developed based on traditional medicine, including drugs with single active ingredients similar to modern drugs and those developed from improved formulations of traditional drugs. However, the problems of traditional isolation and purification and drug screening methods should be addressed for successful drug development from traditional medicine. Advances in microfluidics have not only contributed significantly to classical drug development but have also solved many of the thorny problems of new strategies for developing new drugs from traditional drugs. In this review, we provide an overview of advanced microfluidics and its applications in drug development (drug compound synthesis, drug screening, drug delivery, and drug carrier fabrication) with a focus on its applications in conventional medicine, including the separation and purification of target components in complex samples and screening of active ingredients of conventional drugs. We hope that our review gives better insight into the potential of traditional medicine and the critical role of microfluidics in the drug development process. In addition, the emergence of new ideas and applications will bring about further advances in the field of drug development.

Hydrodynamics of Droplet Sorting in Asymmetric Acute Junctions

Droplet sorting is one of the fundamental manipulations of droplet-based microfluidics. Although many sorting methods have already been proposed, there is still a demand to develop new sorting methods for various applications of droplet-based microfluidics. This work presents numerical investigations on droplet sorting with asymmetric acute junctions. It is found that the asymmetric acute junctions could achieve volume-based sorting and velocity-based sorting. The pressure distributions in the asymmetric junctions are discussed to reveal the physical mechanism behind the droplet sorting. The dependence of the droplet sorting on the droplet volume, velocity, and junction angle is explored. The possibility of the employment of the proposed sorting method in most real experiments is also discussed. This work provides a new, simple, and cost-effective passive strategy to separate droplets in microfluidic channels. Moreover, the proposed acute junctions could be used in combination with other sorting methods, which may boost more opportunities to sort droplets.

Controlled magnesium ion delivery system for in situ bone tissue engineering

Magnesium cation (Mg²⁺) has been an emerging therapeutic agent for inducing vascularized bone regeneration. However, the therapeutic effects of current magnesium (Mg) -containing biomaterials are controversial due to the concentration- and stage-dependent behavior of Mg²⁺. Here, we first provide an overview of biochemical mechanism of Mg²⁺ in various concentrations and suggest that 2-10 mM Mg²⁺in vitro may be optimized. This review systematically summarizes and discusses several types of controlled Mg²⁺ delivery systems based on polymer-Mg composite scaffolds and Mg-containing hydrogels, as well as their design philosophy and several parameters that regulate Mg²⁺ release. Given that the continuous supply of Mg²⁺ may prevent biomineral deposition in the later stage of bone regeneration and maturation, we highlight the controlled delivery of Mg²⁺ based dual- or multi-ions system, especially for the hierarchical therapeutic ion release system, which shows enhanced biomineralization. Finally, the remaining challenges and perspectives of Mg-containing biomaterials for future in situ bone tissue engineering are discussed as well.

Engineering a dynamic three-dimensional cell culturing microenvironment using a "sandwich" structure-liked microfluidic device with 3D printing scaffold

Most of in vivo tissue cells reside in 3D extracellular matrix (ECM) with fluid flow. To better study cell physiology and pathophysiology, there has been an increasing need in the development of methods for culturing cells in in vivo like microenvironments with a number of strategies currently being investigated including hydrogels, spheroids, tissue scaffolds and very promising microfluidic systems. In this paper, a "sandwich" structure-liked microfluidic device integrated with a 3D printing scaffold is proposed for three-dimensional and dynamic cell culture. The device consists of three layers, i.e. upper layer, scaffold layer and bottom layer. The upper layer is used for introducing cells and fixing scaffold, the scaffold layer mimicking ECM is used for providing 3D attachment areas, and the bottom layer mimicking blood vessels is used for supplying dynamic medium for cells. Thermally assisted electrohydrodynamic jet (TAEJ) printing technology and microfabrication technology are combined to fabricate the device. The flow field in the chamber of device is evaluated by numerical simulation and particle tracking technology to investigate the effects of scaffold on fluid microenvironment. The cell culturing processes are presented by the flow behaviours of inks with different colors. The densities and viabilities of HeLa cells are evaluated and compared after 72 h of culturing in the microfluidic devices and 48-well plate. The dose-dependent cell responses to doxorubicin hydrochloride (DOX) are observed after 24 h treatment at different concentrations. These experimental results, including the evaluation of cell proliferation and in vitro cytotoxicity assessment of DOX in the devices and plate, demonstrate that the presented microfluidic device has good biocompatibility and feasibility, which have great potential in providing native microenvironments for in vitro cell studies, tissue engineering and drug screening for tumor therapy.

Construction and Application of Hepatocyte Model Based on Microfluidic Chip Technique in Evaluating Emodin

The current cytological evaluation technique of health food raw materials does not entirely meet the needs of evaluating health food. Our study adopted the microfluidic chip technique for the first time to construct a hepatocyte model of evaluating emodin, which was composed of a human hepatocellular carcinoma cell (HepG2) and microfluidic chip. The mixed glue of a model with rat tail collagen type I (1.3 mg/mL) + gelatin (7.5%) was used to simulate the microenvironment of a cell. The validity of this model was evaluated by cell proliferation activity and cell staining, and the toxicity of emodin was evaluated by a series of metabolic indicators on this model. The results indicated that the repeatability of the constructed hepatocyte model was favorable, with a coefficient of variation (CV) of 2.8%. After emodin continuously was exposed for 48 h, the cell inhibition was obvious at 100 and 200 μM, and the number of dead cells gradually increased with the increasing of emodin concentration, and the difference of BUN was significant between the emodin group and blank group (p < 0.05). The constructed model has a favorable applicability in evaluating emodin. This study provides an important platform and a potential in vitro alternative model for assessing and predicting the health effects of health food.

Efficient ABEI-Dissolved O2-Ce(III, IV)-MOF Ternary Electrochemiluminescent System Combined with Self-Assembled Microfluidic Chips for Bioanalysis

A signal-amplified electrochemiluminescent (ECL) sensor chip was developed for sensitive analysis of procalcitonin (PCT). Herein, we first prepared a self-enhanced luminophore, which enhanced ECL responses through intramolecular reactions. Second, Au-Pd bimetallic nanocrystals and mixed-valence Ce-based metal-organic frameworks (MOFs) were introduced as co-reaction promoters to facilitate the reduction of dissolved O₂. Based on the synergistic catalysis of Au and Pd, the spontaneous cyclic reaction of Ce(III)/Ce(IV), and the high electrochemical active surface area of Ce(III, IV) MOF, a large number of superoxide anion radicals (O₂^•-) and hydroxyl radicals (OH^•) were produced. Therefore, the luminescence efficiency of N-(aminobutyl)-N-(ethylisoluminol)-dissolved O₂ (ABEI-O₂) systems were greatly improved, providing a new prospect for the application of dissolved O₂ in ECL analysis. In addition, the affinity peptide ligands were used for the directional connection of antibodies to provide protection for the bioactivity of the proposed sensor. Finally, the microfluidic technology was applied to ECL analysis to integrate the three-electrode detection system into the self-assembled microfluidic chip, which realized the automation and portability of the detection process. The developed sensor showed high sensitivity for PCT detection with a detection limit of 3.46 fg/mL, which possessed positive significance for the clinical diagnosis of sepsis.

Testing 3D printed biological platform for advancing simulated microgravity and space mechanobiology research

The advancement of microgravity simulators is helping many researchers better understanding the impact of the mechanically unloaded space environment on cellular function and disfunction. However, performing microgravity experiments on Earth, using simulators such as the Random Positioning Machine, introduces some unique practical challenges, including air bubble formation and leakage of growth medium from tissue culture flask and plates, all of which limit research progress. Here, we developed an easy-to-use hybrid biological platform designed with the precision of 3D printing technologies combined with PDMS microfluidic fabrication processes to facilitate reliable and reproducible microgravity cellular experiments. The system has been characterized for applications in the contest of brain cancer research by exposing glioblastoma and endothelial cells to 24 h of simulated microgravity condition to investigate the triggered mechanosensing pathways involved in cellular adaptation to the new environment. The platform demonstrated compatibility with different biological assays, i.e., proliferation, viability, morphology, protein expression and imaging of molecular structures, showing advantages over the conventional usage of culture flask. Our results indicated that both cell types are susceptible when the gravitational vector is disrupted, confirming the impact that microgravity has on both cancer and healthy cells functionality. In particular, we observed deactivation of Yap-1 molecule in glioblastoma cells and the remodeling of VE-Cadherin junctional protein in endothelial cells. The study provides support for the application of the proposed biological platform for advancing space mechanobiology research, also highlighting perspectives and strategies for developing next generation of brain cancer molecular therapies, including targeted drug delivery strategies.

Manipulations of micro/nanoparticles using gigahertz acoustic streaming tweezers

Contactless acoustic manipulation of micro/nanoscale particles has attracted considerable attention owing to its near independence of the physical and chemical properties of the targets, making it universally applicable to almost all biological systems. Thin-film bulk acoustic wave (BAW) resonators operating at gigahertz (GHz) frequencies have been demonstrated to generate localized high-speed microvortices through acoustic streaming effects. Benefitting from the strong drag forces of the high-speed vortices, BAW-enabled GHz acoustic streaming tweezers (AST) have been applied to the trapping and enrichment of particles ranging in size from micrometers to less than 100 nm. However, the behavior of particles in such 3D microvortex systems is still largely unknown. In this work, the particle behavior (trapping, enrichment, and separation) in GHz AST is studied by theoretical analyses, 3D simulations, and microparticle tracking experiments. It is found that the particle motion in the vortices is determined mainly by the balance between the acoustic streaming drag force and the acoustic radiation force. This work can provide basic design principles for AST-based lab-on-a-chip systems for a variety of applications.

Microfluidics for High Pressure: Integration on GaAs Acoustic Biosensors with a Leakage-Free PDMS Based on Bonding Technology

Microfluidics integration of acoustic biosensors is an actively developing field. Despite significant progress in “passive” microfluidic technology, integration with microacoustic devices is still in its research state. The major challenge is bonding polymers with monocrystalline piezoelectrics to seal microfluidic biosensors. In this contribution, we specifically address the challenge of microfluidics integration on gallium arsenide (GaAs) acoustic biosensors. We have developed a robust plasma-assisted bonding technology, allowing strong connections between PDMS microfluidic chip and GaAs/SiO₂ at low temperatures (70 °C). Mechanical and fluidic performances of fabricated device were studied. The bonding surfaces were characterized by water contact angle measurement and ATR-FTIR, AFM, and SEM analysis. The bonding strength was characterized using a tensile machine and pressure/leakage tests. The study showed that the sealed chips were able to achieve a limit of high bonding strength of 2.01 MPa. The adhesion of PDMS to GaAs was significantly improved by use of SiO₂ intermediate layer, permitting the bonded chip to withstand at least 8.5 bar of burst pressure. The developed bonding approach can be a valuable solution for microfluidics integration in several types of MEMS devices.

3D In Vitro Models: Novel Insights into Idiopathic Pulmonary Fibrosis Pathophysiology and Drug Screening

Idiopathic pulmonary fibrosis (IPF) is a progressive and often lethal interstitial lung disease of unknown aetiology. IPF is characterised by myofibroblast activation, tissue stiffening, and alveolar epithelium injury. As current IPF treatments fail to halt disease progression or induce regeneration, there is a pressing need for the development of novel therapeutic targets. In this regard, tri-dimensional (3D) models have rapidly emerged as powerful platforms for disease modelling, drug screening and discovery. In this review, we will touch on how 3D in vitro models such as hydrogels, precision-cut lung slices, and, more recently, lung organoids and lung-on-chip devices have been generated and/or modified to reveal distinct cellular and molecular signalling pathways activated during fibrotic processes. Markedly, we will address how these platforms could provide a better understanding of fibrosis pathophysiology and uncover effective treatment strategies for IPF patients.

Microfluidic Droplet Cluster with Distributed Evaporation Rates as a Model for Bioaerosols

Aerosols and microdroplets are known to act as carriers for pathogens or vessels for chemical reactions. The natural occurrence of evaporation of these droplets has implications for the viability of pathogens or chemical processes. For example, it is important to understand how pathogens survive extreme physiochemical conditions such as confinement and osmotic stress induced by evaporation of aerosol droplets. Previously, larger evaporating droplets were proposed as model systems as the processes in the tiny aerosol droplets are difficult to image. In this context, we propose the concept of evaporation of capillary-clustered aqueous microdroplets dispersed in a thin oil layer. The configuration produces spatially segregated evaporation rates. It allows comparing the consequences of evaporation and its rate for processes occurring in droplets. As a proof of concept, we study the consequences of evaporation and its rate using Escherichia coli (E. coli) and Bacillus subtilis as model organisms. Our experiments indicate that the rate of evaporation of microdroplets is an important parameter in deciding the viability of contained microorganisms. With slow evaporation, E. coli could mitigate the osmotic stress by K⁺ ion uptake. Our method may also be applicable to other evaporating droplet systems, for example, microdroplet chemistry to understand the implications of evaporation rates.

Quenching Epigenetic Drug Resistance Using Antihypoxic Microparticles in Glioblastoma Patient-Derived Chips

Glioblastoma (GBM) is one of the most intractable tumor types due to the progressive drug resistance upon tumor mass expansion. Incremental hypoxia inside the growing tumor mass drives epigenetic drug resistance by activating nongenetic repair of antiapoptotic DNA, which could be impaired by drug treatment. Hence, rescuing intertumor hypoxia by oxygen-generating microparticles may promote susceptibility to antitumor drugs. Moreover, a tumor-on-a-chip model enables user-specified alternation of clinic-derived samples. This study utilizes patient-derived glioblastoma tissue to generate cell spheroids with size variations in a 3D microchannel network chip (GBM chip). As the spheroid size increases, epigenetic drug resistance is promoted with inward hypoxia severance, as supported by the spheroid size-proportional expression of hypoxia-inducible factor-1a in the chip. Loading antihypoxia microparticles onto the spheroid surface significantly reduces drug resistance by silencing the expression of critical epigenetic factor, resulting in significantly decreased cell invasiveness. The results are confirmed in vitro using cell line and patient samples in the chip as well as chip implantation into a hypoxic hindlimb ischemia model in mice, which is an unprecedented approach in the field.

Microfluidic Roadmap for Translational Nanotheranostics

Nanotheranostic materials (NTMs) shed light on the mechanisms responsible for complex diseases such as cancer because they enable making a diagnosis, monitoring the disease progression, and applying a targeted therapy simultaneously. However, several issues such as the reproducibility and mass production of NTMs hamper their application for clinical practice. To address these issues and facilitate the clinical application of NTMs, microfluidic systems have been increasingly used. This perspective provides a glimpse into the current state-of-art of NTM research, emphasizing the methods currently employed at each development stage of NTMs and the related open problems. This work reviews microfluidic technologies used to develop NTMs, ranging from the fabrication and testing of a single NTM up to their manufacturing on a large scale. Ultimately, a step-by-step vision on the future development of NTMs for clinical practice enabled by microfluidics techniques is provided.

Microfluidics device for drug discovery, screening and delivery

Microfluidics and lab-on-chip are two progressive technologies widely used for drug discovery, screening and delivery. It has been designed in a way to act as a platform for sample preparations, culturing, incubation and screening through multi-channels. These devices require a small amount of reagent in about micro- to nanolitre volume. Microfluidics has the capacity to perform operations in a programmable manner and is easy to fine tune the size, shape and composition of drugs by changing flow rate and precise manipulations. Microfluidics platform comes with the advantage of mixing fluid in droplet reactors. Microfluidics is used in the field of chemistry, biomedical, biology and nanotechnology due to its high-throughput performance in various assays. It is potent enough to be used in microreactors for synthesis of particles and encapsulation of many biological entities for biological and drug delivery applications. Microfluidics therefore has the scope to be uplifted from basic to advanced diagnostic and therapeutic applications.

From organ-on-chip to body-on-chip: The next generation of microfluidics platforms for in vitro drug efficacy and toxicity testing

The high failure rate in drug development is often attributed to the lack of accurate pre-clinical models that may lead to false discoveries and inconclusive data when the compounds are eventually tested in clinical phase. With the evolution of cell culture technologies, drug testing systems have widely improved, and today, with the emergence of microfluidics devices, drug screening seems to be at the dawn of an important revolution. An organ-on-chip allows the culture of living cells in continuously perfused microchambers to reproduce physiological functions of a particular tissue or organ. The advantages of such systems are not only their ability to recapitulate the complex biochemical interactions between different human cell types but also to incorporate physical forces, including shear stress and mechanical stretching or compression. To improve this model, and to reproduce the absorption, distribution, metabolism, and elimination process of an exogenous compound, organ-on-chips can even be linked fluidically to mimic physiological interactions between different organs, leading to the development of body-on-chips. Although these technologies are still at a young age and need to address a certain number of limitations, they already demonstrated their relevance to study the effect of drugs or toxins on organs, displaying a similar response to what is observed in vivo. The purpose of this review is to present the evolution from organ-on-chip to body-on-chip, examine their current use for drug testing and discuss their advantages and future challenges they will face in order to become an essential pillar of pharmaceutical research.

Reinforcement learning reveals fundamental limits on the mixing of active particles

The control of far-from-equilibrium physical systems, including active materials, requires advanced control strategies due to the non-linear dynamics and long-range interactions between particles, preventing explicit solutions to optimal control problems. In such situations, Reinforcement Learning (RL) has emerged as an approach to derive suitable control strategies. However, for active matter systems, it is an important open question how the mathematical structure and the physical properties determine the tractability of RL. In this paper, we demonstrate that RL can only find good mixing strategies for active matter systems that combine attractive and repulsive interactions. Using analytic results from dynamical systems theory, we show that combining both interaction types is indeed necessary for the existence of mixing-inducing hyperbolic dynamics and therefore the ability of RL to find homogeneous mixing strategies. In particular, we show that for drag-dominated translational-invariant particle systems, mixing relies on combined attractive and repulsive interactions. Therefore, our work demonstrates which experimental developments need to be made to make protein-based active matter applicable, and it provides some classification of microscopic interactions based on macroscopic behavior.

Fluid Drag Reduction by Magnetic Confinement

The frictional forces of a viscous liquid flow are a major energy loss issue and severely limit microfluidics practical use. Reducing this drag by more than a few tens of percent remain elusive. Here, we show how cylindrical liquid-in-liquid flow leads to drag reduction of 60-99% for sub-mm and mm-sized channels, regardless of whether the viscosity of the transported liquid is larger or smaller than that of the confining one. In contrast to lubrication or sheath flow, we do not require a continuous flow of the confining lubricant, here made of a ferrofluid held in place by magnetic forces. In a laminar flow model with appropriate boundary conditions, we introduce a modified Reynolds number with a scaling that depends on geometrical factors and viscosity ratio of the two liquids. It explains our whole range of data and reveals the key design parameters for optimizing the drag reduction values. Our approach promises a new route for microfluidics designs with pressure gradient reduced by orders of magnitude.

A Cell Culture Chip with Transparent, Micropillar-Decorated Bottom for Live Cell Imaging and Screening of Breast Cancer Cells

In the recent years, microfabrication technologies have been widely used in cell biology, tissue engineering, and regenerative medicine studies. Today, the implementation of microfabricated devices in cancer research is frequent and advantageous because it enables the study of cancer cells in controlled microenvironments provided by the microchips. Breast cancer is one of the most common cancers in women, and the way breast cancer cells interact with their physical microenvironment is still under investigation. In this study, we developed a transparent cell culture chip (Ch-Pattern) with a micropillar-decorated bottom that makes live imaging and monitoring of the metabolic, proliferative, apoptotic, and morphological behavior of breast cancer cells possible. The reason for the use of micropatterned surfaces is because cancer cells deform and lose their shape and acto-myosin integrity on micropatterned substrates, and this allows the quantification of the changes in morphology and through that identification of the cancerous cells. In the last decade, cancer cells were studied on micropatterned substrates of varying sizes and with a variety of biomaterials. These studies were conducted using conventional cell culture plates carrying patterned films. In the present study, cell culture protocols were conducted in the clear-bottom micropatterned chip. This approach adds significantly to the current knowledge and applications by enabling low-volume and high-throughput processing of the cell behavior, especially the cell–micropattern interactions. In this study, two different breast cancer cell lines, MDA-MB-231 and MCF-7, were used. MDA-MB-231 cells are invasive and metastatic, while MCF-7 cells are not metastatic. The nuclei of these two cell types deformed to distinctly different levels on the micropatterns, had different metabolic and proliferation rates, and their cell cycles were affected. The Ch-Pattern chips developed in this study proved to have significant advantages when used in the biological analysis of live cells and highly beneficial in the study of screening breast cancer cell–substrate interactions in vitro.

A 30.3 fA/√Hz Biosensing Current Front-End With 139 dB Cross-Scale Dynamic Range

This paper presents an 8-channel array of low-noise (30.3 fA/√Hz) current sensing front-ends with on-chip microelectrode electrochemical sensors. The analog front-end (AFE) consists of a 1^st-order continuous-time delta-sigma (CT ΔΣ) modulator that achieves 123 fA sensitivity over a 10 Hz bandwidth and 139 dB cross-scale dynamic range with a 2-bit programmable current reference. A digital predictor and tri-level pulse width modulated (PWM) current-steering DAC realize the equivalent performance of a multi-bit ΔΣ in an area- and power-efficient manner. The AFE consumes 50.3 µW and 0.11 mm² per readout channel. The proposed platform was used to observe protein-ligand interactions in real-time using transient induced molecular electronic spectroscopy (TIMES), a label- and immobilization-free biosensing technique.

Droplet microfluidics on analysis of pathogenic microbes for wastewater-based epidemiology

Infectious diseases caused by pathogenic microbes have posed a major health issue for the public, such as the ongoing COVID-19 global pandemic. In recent years, wastewater-based epidemiology (WBE) is emerging as an effective and unbiased method for monitoring public health. Despite its increasing importance, the advancement of WBE requires more competent and streamlined analytical platforms. Herein we discuss the interactions between WBE and droplet microfluidics, focusing on the analysis of pathogens in droplets, which is hard to be tackled by traditional analytical tools. We highlight research works from three aspects, namely, quantitation of pathogen biomarkers in droplets, single-cell analysis in droplets, and living cell biosensors in droplets, as well as providing future perspectives on the synergy between WBE and droplet microfluidics.

Fused Deposition Modeling of Microfluidic Chips in Transparent Polystyrene

Polystyrene (PS) is one of the most commonly used thermoplastic materials worldwide and plays a ubiquitous role in today's biomedical and life science industry and research. The main advantage of PS lies in its facile processability, its excellent optical and mechanical properties, as well as its biocompatibility. However, PS is only rarely used in microfluidic prototyping, since the structuring of PS is mainly performed using industrial-scale replication processes. So far, microfluidic chips in PS have not been accessible to rapid prototyping via 3D printing. In this work, we present, for the first time, 3D printing of transparent PS using fused deposition modeling (FDM). We present FDM printing of transparent PS microfluidic channels with dimensions as small as 300 µm and a high transparency in the region of interest. Furthermore, we demonstrate the fabrication of functional chips such as Tesla-mixer and mixer cascades. Cell culture experiments showed a high cell viability during seven days of culturing, as well as enabling cell adhesion and proliferation. With the aid of this new PS prototyping method, the development of future biomedical microfluidic chips will be significantly accelerated, as it enables using PS from the early academic prototyping all the way to industrial-scale mass replication.

Single-Cell Microgels for Diagnostics and Therapeutics

Cell encapsulation within hydrogel droplets is transforming what is feasible in multiple fields of biomedical science such as tissue engineering and regenerative medicine, in vitro modeling, and cell-based therapies. Recent advances have allowed researchers to miniaturize material encapsulation complexes down to single-cell scales, where each complex, termed a single-cell microgel, contains only one cell surrounded by a hydrogel matrix while remaining <100 μm in size. With this achievement, studies requiring single-cell resolution are now possible, similar to those done using liquid droplet encapsulation. Of particular note, applications involving long-term in vitro cultures, modular bioinks, high-throughput screenings, and formation of 3D cellular microenvironments can be tuned independently to suit the needs of individual cells and experimental goals. In this progress report, an overview of established materials and techniques used to fabricate single-cell microgels, as well as insight into potential alternatives is provided. This focused review is concluded by discussing applications that have already benefited from single-cell microgel technologies, as well as prospective applications on the cusp of achieving important new capabilities.

Bioanalytical strategies in drug discovery and development

A reliable, rapid, and effective bioanalytical method is essential for the determination of the pharmacokinetic, pharmacodynamic, and toxicokinetic parameters that inform the safety and efficacy profile of investigational drugs. The overall goal of bioanalytical method development is to elucidate the procedure and operating conditions under which a method can sufficiently extract, qualify, and/or quantify the analyte(s) of interest and/or their metabolites for the intended purpose. Given the difference in the physicochemical properties of small and large molecule drugs, different strategies need to be adopted for the development of an effective and efficient bioanalytical method. Herein, we provide an overview of different sample preparation strategies, analytical platforms, as well as procedures for achieving high throughput for bioanalysis of small and large molecule drugs.

Nanotechnology against COVID-19: Immunization, diagnostic and therapeutic studies

The emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in early 2020 soon led to the global pandemic of Coronavirus Disease 2019 (COVID-19). Since then, the clinical and scientific communities have been closely collaborating to develop effective strategies for controlling the ongoing pandemic. The game-changing fields of recent years, nanotechnology and nanomedicine have the potential to not only design new approaches, but also to improve existing methods for the fight against COVID-19. Nanomaterials can be used in the development of highly efficient, reusable personal protective equipment, and antiviral nano-coatings in public settings could prevent the spread of SARS-CoV-2. Smart nanocarriers have accelerated the design of several therapeutic, prophylactic, or immune-mediated approaches against COVID-19. Some nanovaccines have even entered Phase IΙ/IIΙ clinical trials. Several rapid and cost-effective COVID-19 diagnostic techniques have also been devised based on nanobiosensors, lab-on-a-chip systems, or nanopore technology. Here, we provide an overview of the emerging role of nanotechnology in the prevention, diagnosis, and treatment of COVID-19.

Microfluidics for Drug Development: From Synthesis to Evaluation

Drug development is a long process whose main content includes drug synthesis, drug delivery, and drug evaluation. Compared with conventional drug development procedures, microfluidics has emerged as a revolutionary technology in that it offers a miniaturized and highly controllable environment for bio(chemical) reactions to take place. It is also compatible with analytical strategies to implement integrated and high-throughput screening and evaluations. In this review, we provide a comprehensive summary of the entire microfluidics-based drug development system, from drug synthesis to drug evaluation. The challenges in the current status and the prospects for future development are also discussed. We believe that this review will promote communications throughout diversified scientific and engineering communities that will continue contributing to this burgeoning field.

Evolution of Plant Virus Diagnostics Used in Australian Post Entry Quarantine

As part of a special edition for MDPI on plant virology in Australia, this review provides a brief high-level overview on the evolution of diagnostic techniques used in Australian government Post-Entry Quarantine (PEQ) facilities for testing imported plants for viruses. A comprehensive range of traditional and modern diagnostic approaches have historically been employed in PEQ facilities using bioassays, serological, and molecular techniques. Whilst these techniques have been effective, they are time consuming, resource intensive and expensive. The review highlights the importance of ensuring the best available science and diagnostic developments are constantly tested, evaluated, and implemented by regulators to ensure primary producers have rapid and safe access to new genetics to remain productive, sustainable and competitive.