Dynamic and programmable morphology and size evolution via a living hierarchical self-assembly strategy

Preparation and Characterization of Extracellular Matrix Hydrogels Derived from Acellular Cartilage Tissue

Decellularized matrices can effectively reduce severe immune rejection with their cells and eliminated nucleic acid material and provide specific environments for tissue repair or tissue regeneration. In this study, we prepared acellular cartilage matrix (ACM) powder through the decellularization method and developed ACM hydrogels by physical, chemical, and enzymatic digestion methods. The results demonstrated that the small size group of ACM hydrogels exhibited better gel conditions when the concentration of ACM hydrogels was 30 and 20 mg/mL in 1N HCl through parameter adjustment. The data also confirmed that the ACM hydrogels retained the main components of cartilage: 61.18% of glycosaminoglycan (GAG) and 78.29% of collagen, with 99.61% of its DNA removed compared to samples without the decellularization procedure (set as 100%). Through turbidimetric gelation kinetics, hydrogel rheological property analysis, and hydrogel tissue physical property testing, this study also revealed that increasing hydrogel concentration is helpful for gelation. Besides, the ex vivo test confirmed that a higher concentration of ACM hydrogels had good adhesive properties and could fill in cartilage defects adequately. This study offers useful information for developing and manufacturing ACM hydrogels to serve as potential alternative scaffolds for future cartilage defect treatment.

Facile Construction of Hybrid Hydrogels with High Strength and Biocompatibility for Cranial Bone Regeneration

The significant efforts being made towards the utilization of artificial soft materials holds considerable promise for developing tissue engineering scaffolds for bone-related diseases in clinics. However, most of these biomaterials cannot simultaneously satisfy the multiple requirements of high mechanics, good compatibility, and biological osteogenesis. In this study, an osteogenic hybrid hydrogel between the amine-functionalized bioactive glass (ABG) and 4-armed poly(ethylene glycol) succinimidyl glutarate-gelatin network (SGgel) is introduced to flexibly adhere onto the defective tissue and to subsequently guide bone regeneration. Relying on the rapid ammonolysis reaction between amine groups (-NH₂) of gelatin and ABG components and N-hydroxysuccinimide (NHS)-ester of tetra-PEG-SG polymer, the hydrogel networks were formed within seconds, offering a multifunctional performance, including easy injection, favorable biocompatibility, biological and mechanical properties (compressive strength: 4.2 MPa; storage modulus: 10⁴ kPa; adhesive strength: 56 kPa), which could facilitate the stem cell viability, proliferation, migration and differentiation into osteocytes. In addition, the integration between the SGgel network and ABG moieties within a nano-scale level enabled the hybrid hydrogel to form adhesion to tissue, maintain the durable osteogenesis and accelerate bone regeneration. Therefore, a robust approach to the simultaneously satisfying tough adhesion onto the tissue defects and high efficiency for bone regeneration on a mouse skull was achieved, which may represent a promising strategy to design therapeutic scaffolds for tissue engineering in clinical applications.

Mechanically Robust Hydrogels Facilitating Bone Regeneration through Epigenetic Modulation

Development of artificial biomaterials by mimicking extracellular matrix of bone tissue is a promising strategy for bone regeneration. Hydrogel has emerged as a type of viable substitute, but its inhomogeneous networks and weak mechanics greatly impede clinical applications. Here, a dual crosslinked gelling system is developed with tunable architectures and mechanics to promote osteogenic capacity. Polyhedral oligomeric silsesquioxane (POSS) is designated as a rigid core surrounded by six disulfide-linked PEG shells and two 2-ureido-4[1H]-pyrimidinone (UPy) groups. Thiol-disulfide exchange is employed to fabricate chemical network because of the pH-responsive "on/off" function. While self-complementary UPy motif is capable of optimizing local microstructure to enhance mechanical properties. Taking the merits of biocompatibility and high-mechanics in periodontal ligament stem cells (PDLSCs) proliferation, attachment, and osteogenesis, hybrid hydrogel exhibits outstanding osteogenic potential both in vitro and in vivo. Importantly, it is the first time that a key epigenetic regulator of ten-eleven translocation 2 (Tet2) is discovered to significantly elevate the continuously active the WNT/β-catenin through Tet2/HDAC1/E-cadherin/β-catenin signaling cascade, thereby promoting PDLSCs osteogenesis. This work represents a general strategy to design the hydrogels with customized networks and biomimetic mechanics, and illustrates underlying osteogenic mechanisms that will extend the design rationales for high-functional biomaterials in tissue engineering.

Nanomicelles Array for Ultrahigh-Density Data Storage

High-density data storage devices based on organic and polymer materials are currently restricted by two key issues, size limitations and uniformity of memory cells. Herein, one triblock polymer is synthesized by ring-opening metathesis polymerization, where the polymer contains an electron-donor-acceptor (A₁ D) segment, an electron-acceptor (A₂ ) segment, and a hydrophilic segment, that shows ternary memory behavior in a conventional sandwich-type device. The polymers that have monodisperse molecular weight dispersity self-assemble into nanomicelles with a uniform size of 80 nm. Each nanomicelle is composed of an A₁ DA₂ -type hydrophobic core stabilized with a hydrophilic shell. Nanobowls based on conductive oxide are prepared via the template method, wherein the nanomicelles are present as independent nanoscale memory units to produce an array of micelle matrices. Investigations of the resulting nanomemory device using conductive atomic force microscopy show that the micelles exhibit a predominant semiconductor memory behavior. Compared to traditional ternary devices with a memory unit size of ≈1 mm, this innovative fabrication method based on arrayed uniform nanomicelles downscales the size of storage cells to 80 nm. Furthermore, the described system leads to a greatly enhanced storage density (>10⁸ times over the same area), which opens up new paths for further development of ultrahigh-density data storage devices.

Advances of Stimulus-Responsive Hydrogels for Bone Defects Repair in Tissue Engineering

Bone defects, as one of the most urgent problems in the orthopedic clinic, have attracted much attention from the biomedical community and society. Hydrogels have been widely used in the biomedical field for tissue engineering research because of their excellent hydrophilicity, biocompatibility, and degradability. Stimulus-responsive hydrogels, as a new type of smart biomaterial, have more advantages in sensing external physical (light, temperature, pressure, electric field, magnetic field, etc.), chemical (pH, redox reaction, ions, etc.), biochemical (glucose, enzymes, etc.) and other different stimuli. They can respond to stimuli such as the characteristics of the 3D shape and solid-liquid phase state, and exhibit special properties (injection ability, self-repair, shape memory, etc.), thus becoming an ideal material to provide cell adhesion, proliferation, and differentiation, and achieve precise bone defect repair. This review is focused on the classification, design concepts, and research progress of stimulus-responsive hydrogels based on different types of external environmental stimuli, aiming at introducing new ideas and methods for repairing complex bone defects.

Highly Regulated Supramolecular Assembly of 2-O-Methylated α-Cyclodextrin to Construct Vertically Oriented Microrods on Graphite

Precisely controlling self-assembled molecules to fabricate highly ordered nano/microstructures is a challenging task. Here, a simple precipitation technique with common solvents forms supramolecular microstructures with highly regulated molecular arrangements from a methylated derivative of α-cyclodextrin at the 2-O position (2-Me-α-CD). The formation of a head-to-tail channel assembly of 2-Me-α-CD through host-guest complexation with a solvent molecule such as benzene or cyclohexane yields well-defined hexagonal microrods. Specifically, the self-assembly of 2-Me-α-CD forms vertically aligned hexagonal microrods on a highly ordered pyrolytic graphite (HOPG) surface via epitaxial growth. This work should provide insight into the design of supramolecular building blocks for controlled self-assembly.

Visible light triggered controlled formation of rapidly self-healing hydrogels based on thiol-disulfide exchange

The properties of stimuli-responsive hydrogels can be tailored under various external stimuli, but it is difficult to realize the customized adjustment of hydrogel properties since the crosslinking degree in the gelation process is intractable. Here, a visible light triggered thiol-disulfide exchange reaction was applied for constructing disulfide-crosslinked hydrogels from P(EMA-SS-PEG), a poly(ethylene glycol) grafted poly(ethyl methacrylate) derivative with a disulfide linkage as the grafting point. This photochemical method provides mild gelation conditions to handily regulate the morphology, mechanical properties, swelling ratio, and degradation rate of hydrogels by simply varying the irradiation time. Based on this strategy, these disulfide-crosslinked hydrogel coatings showed rapid self-healing in 10 min under ambient conditions, which was dependent on the width of the scratch, temperature, and humidity. Notably, spraying water on these coatings could significantly accelerate the self-healing process of large scratches (360 μm) at room temperature with a self-healing time of 1 hour, enabling the practical application of hydrogel coatings in a natural environment.

Study on the Effect of Polymer Excipients on the Dispersibility, Interaction, Solubility, and Scavenging Reactive Oxygen Species of Myricetin Solid Dispersion: Experiment and Molecular Simulation

Although the preparation of amorphous solid dispersions can improve the solubility of crystalline drugs, there is still a lack of guidance on the micromechanism in the screening and evaluation of polymer excipients. In this study, a particular method of experimental characterization combined with molecular simulation was attempted on solubilization of myricetin (MYR) by solid dispersion. According to the analysis of the dispersibility and hydrogen-bond interaction, the effectiveness of the solid dispersion and the predicted sequence of poly(vinyl pyrrolidone) (PVP) > hypromellose (HPMC) > poly(ethylene glycol) (PEG) as the polymer excipient were verified. Through the dissolution, cell viability, and reactive oxygen species (ROS)-level detection, the reliability of simulation and micromechanism analysis was further confirmed. This work not only provided the theoretical guidance and screening basis for the miscibility of solid dispersions from the microscopic level but also served as a reference for the modification of new drugs.

Self-Assembly of Poly(Janus particle)s into Unimolecular and Oligomeric Spherical Micelles

Using shape-persistent Janus particles to construct poly(Janus particle)s and studying their self-assembly behaviors are of great interest, but remain largely unexplored. In this work, we reported a type of amphiphiles constructed by the ring-opening metathesis polymerization of nonspherical molecular Janus particles (APOSS-BPOSS), called poly(Janus particle)s (poly(APOSS-BPOSS)_n, n = 12, 17, 22, and 35, and M_n = 35-100 kg/mol). Unlike traditional bottlebrush polymers consisting of flexible side chains, these poly(Janus particles) consist of rigid hydrophilic and hydrophobic polyhedral oligomeric silsesquioxane (POSS) cages as side chains. Interestingly, instead of maintaining an expected extended chain conformation, they could also collapse and then self-assemble to form unconventional unimolecular or oligomeric spherical micelles in solutions with a feature size smaller than 7 nm. More importantly, unlike traditional amphiphilic polymer brushes that could form unimolecular micelles at a relatively high degree of polymerization by self-assembly, these poly(Janus particles)s could accomplish self-assembly at a quite low degree of polymerization because of their unique chemical structure and molecular topology. The formation of unimolecular and oligomeric micelles was also further confirmed by dissipative particle dynamics simulations. This study of introducing the POSS-based poly(Janus particle)s as a class of shape amphiphiles will provide a model system for generating unimolecular and oligomeric micellar nanostructures through solution self-assembly.

PEGylated Doxorubicin Prodrug-Forming Reduction-Sensitive Micelles With High Drug Loading and Improved Anticancer Therapy

Significant efforts on the design and development of advanced drug delivery systems for targeted cancer chemotherapy continue to be a major challenge. Here, we reported a kind of reduction-responsive PEGylated doxorubicin (DOX) prodrug via the simple esterification and amidation reactions, which self-assembled into the biodegradable micelles in solutions. Since there was an obvious difference in the reduction potentials between the oxidizing extracellular milieu and the reducing intracellular fluids, these PEG-disulfide-DOX micelles were localized intracellularly and degraded rapidly by the stimulus to release the drugs once reaching the targeted tumors, which obviously enhanced the therapeutic efficacy with low side effects. Moreover, these reduction-sensitive micelles could also physically encapsulate the free DOX drug into the polymeric cargo, exhibiting a two-phase programmed drug release behavior. Consequently, it showed a potential to develop an intelligent and multifunctional chemotherapeutic payload transporter for the effective tumor therapy.

Advances of Hydrogel-Based Bioprinting for Cartilage Tissue Engineering

Bioprinting has gained immense attention and achieved the revolutionized progress for application in the multifunctional tissue regeneration. On account of the precise structural fabrication and mimicking complexity, hydrogel-based bio-inks are widely adopted for cartilage tissue engineering. Although more and more researchers have reported a number of literatures in this field, many challenges that should be addressed for the development of three-dimensional (3D) bioprinting constructs still exist. Herein, this review is mainly focused on the introduction of various natural polymers and synthetic polymers in hydrogel-based bioprinted scaffolds, which are systematically discussed via emphasizing on the fabrication condition, mechanical property, biocompatibility, biodegradability, and biological performance for cartilage tissue repair. Further, this review describes the opportunities and challenges of this 3D bioprinting technique to construct complex bio-inks with adjustable mechanical and biological integrity, and meanwhile, the current possible solutions are also conducted for providing some suggestive ideas on developing more advanced bioprinting products from the bench to the clinic.

Ex Vivo and In Vivo Properties of an Injectable Hydrogel Derived From Acellular Ear Cartilage Extracellular Matrix

Extracellular matrix (ECM) hydrogels provide advantages such as injectability, the ability to fill an irregularly shaped space, and the adequate bioactivity of native matrix. In this study, we developed decellularized cartilage ECM (dcECM) hydrogels from porcine ears innovatively via the main method of enzymatic digestion and verified good biocompatible properties of dcECM hydrogels to deliver chondrocytes and form subcutaneous cartilage in vivo. The scanning electron microscopy and turbidimetric gelation kinetics were used to characterize the material properties and gelation kinetics of the dcECM hydrogels. Then we evaluated the biocompatibility of hydrogels via the culture of chondrocytes in vitro. To further explore the dcECM hydrogels in vivo, grafts made from the mixture of dcECM hydrogels and chondrocytes were injected subcutaneously in nude mice for the gross and histological analysis. The structural and gelation kinetics of the dcECM hydrogels altered according to the variation in the ECM concentrations. The 10 mg/ml dcECM hydrogels could support the adhesion and proliferation of chondrocytes in vitro. In vivo, at 4 weeks after transplantation, cartilage-like tissues were detected in all groups with positive staining of toluidine blue, Safranin O, and collagen II, indicating the good gelation of dcECM hydrogels. While with the increasing concentration, the tissue engineering cartilages formed by 10 mg/ml dcECM hydrogel grafts were superior in weights, volumes, collagen, and glycosaminoglycan (GAG) content compared to the dcECM hydrogels of 1 mg/ml and 5 mg/ml. At 8 weeks after grafting, dcECM hydrogel grafts at 10 mg/ml showed very similar qualities to the control, collagen I grafts. After 12 weeks of in vivo culture, the histological analysis indicated that 10 mg/ml dcECM hydrogel grafts were similar to the normal cartilage from pig ears, which was the source tissue. In conclusion, dcECM hydrogel showed the promising potential as a tissue engineering biomaterial to improve the regeneration and heal injuries of ear cartilage.

Programmable assembly of particles on a Chladni plate

In nature, simple building units can be assembled into complex shapes through long-term time-varying external stimuli that are often spatially nonlinear. In contrast, most artificial methods of externally directed assembly rely on field- or template-based energy minimization. However, methods directing the assembly process by controlling time-varying external stimuli instead of attaining the lowest-energy state remain largely unexplored. In this study, we introduce a method that applies time-varying and spatially nonlinear vibration fields to assemble particles into a desired two-dimensional shape. Our assembly method predicts, controls, and monitors the vibration-induced particle motion to iteratively minimize the difference between the desired shape and the actual particle distribution. We applied our method to a centrally actuated vibrating plate, also known as a Chladni plate, and assembled up to a hundred submillimeter particles into complex recognizable shapes. The method allows programmable formation of shapes beyond the intrinsic limits of periodic patterning of the plate.

Schiff-Linked PEGylated Doxorubicin Prodrug Forming pH-Responsive Nanoparticles With High Drug Loading and Effective Anticancer Therapy

Developing efficacious drug delivery systems for targeted cancer chemotherapy remains a major challenge. Here we demonstrated a kind of pH-responsive PEGylated doxorubicin (DOX) prodrug via the effective esterification and Schiff base reactions, which could self-assemble into the biodegradable micelles in aqueous solutions. Owing to low pH values inside the tumor cells, these PEG-Schiff-DOX nanoparticles exhibited high drug loading ability and pH-responsive drug release behavior within the tumor cells or tissues upon changes in physical and chemical environments, but they displayed good stability at physiological conditions for a long period. CCK-8 assay showed that these PEGylated DOX prodrugs had a similar cytotoxicity to the MCF-7 tumor cells as the free DOX drug. Moreover, this kind of nanoparticle could also encapsulate small DOX drugs with high drug loading, sufficient drug release and enhanced therapeutic effects toward MCF-7 cells, which will be benefited for developing more drug carriers with desirable functions for clinical anticancer therapy.

Co-delivery of chitosan nanoparticles of 5-aminolevulinic acid and shGBAS for improving photodynamic therapy efficacy in oral squamous cell carcinomas

BACKGROUND

The improvement of gene therapy provides hope for the treatment of cancer. However, malignant tumor is a multifactorial disease, which remains difficult to be cured with a single therapy. Our previous study reported that mitochondrial genes glioblastoma-amplified sequence (GBAS) plays a role in the development and treatment of oral squamous cell carcinoma (OSCC). The current study focused on building a mitochondrial-targeting drug co-delivery system for combined photodynamic therapy (PDT) and gene therapy.

METHODS

5-aminolevulinic acid (ALA) photosensitizer loaded chitosan (CS) nanoparticles were prepared using ionic crosslinking method, and further synthesized with the GBAS gene plasmid DNA (shGBAS) by electrostatic attraction. We detected the effects of PDT using the co-delivery system (CS-ALA-shGBAS) on cell proliferation and mitochondrial injury by MTT and reactive oxygen species (ROS) assays, respectively. Additionally, a oral cancer Xenograft model of nude mice was built to test its inhibitive effect on the cancerous growth in vivo.

RESULTS

A novel nanocomposite, CS-ALA-shGBAS, was found to be spherical structures and had good dispersion, stability and hypotoxicity. Gel retardation assay showed that CS-ALA nanoparticle could synthesize shGBAS at and above Nanoparticle/Plasmid ratios of 1/2. Excitingly, the co-delivery system was suitable for transfected cells and displayed a superior mitochondrially targeted killing effect on OSCC in vitro and in vivo.

CONCLUSION

Our study provides evidence that the chitosan-based co-delivery system of ALA-induced protoporphyrin IX (PpIX) photosensitizer and GBAS gene may be a novel mode of combined therapy for OSCC.

Current Trends of Targeted Drug Delivery for Oral Cancer Therapy

Oral cancer is an aggressive tumor that invades the local tissue and can cause metastasis and high mortality. Conventional treatment strategies, e.g., surgery, chemotherapy, and radiation therapy alone or in combinations, possess innegligible issues, and significant side and adverse effects for the clinical applications. Currently, targeting drug delivery is emerging as an effective approach for oral delivery of different therapeutics. Herein we provide a state-of-the-art review on the current progress of targeting drug delivery for oral cancer therapy. Variously oral delivery systems including polymeric/inorganic nanoparticles, liposomes, cyclodextrins, nanolipids, and hydrogels-based forms are emphasized and discussed, and biomimetic systems with respect to oral delivery like therapeutic vitamin, exosomes, proteins, and virus-like particles are also described with emphasis on the cancer treatment. A future perspective is also provided to highlight the existing challenges and possible resolution toward clinical translation of current oral cancer therapies.

Recent Advances of Magnetic Nanomaterials in Bone Tissue Repair

The magnetic field has been proven to enhance bone tissue repair by affecting cell metabolic behavior. Magnetic nanoparticles are used as biomaterials due to their unique magnetic properties and good biocompatibility. Through endocytosis, entering the cell makes it easier to affect the physiological function of the cell. Once the magnetic particles are exposed to an external magnetic field, they will be rapidly magnetized. The magnetic particles and the magnetic field work together to enhance the effectiveness of their bone tissue repair treatment. This article reviews the common synthesis methods, the mechanism, and application of magnetic nanomaterials in the field of bone tissue repair.

Recent Advances of Chitosan-Based Injectable Hydrogels for Bone and Dental Tissue Regeneration

Traditional strategies of bone repair include autografts, allografts and surgical reconstructions, but they may bring about potential hazard of donor site morbidity, rejection, risk of disease transmission and repetitive surgery. Bone tissue engineering (BTE) is a multidisciplinary field that offers promising substitutes in biopharmaceutical applications, and chitosan (CS)-based bone reconstructions can be a potential candidate in regenerative tissue fields owing to its low immunogenicity, biodegradability, bioresorbable features, low-cost and economic nature. Formulations of CS-based injectable hydrogels with thermo/pH-response are advantageous in terms of their high-water imbibing capability, minimal invasiveness, porous networks, and ability to mold perfectly into an irregular defect. Additionally, CS combined with other naturally-derived or synthetic polymers and bioactive agents has proven to be an effective alternative to autologous bone and dental grafts. In this review, we will highlight the current progress in the development of preparation methods, physicochemical properties and applications of CS-based injectable hydrogels and their perspectives in bone and dental regeneration. We believe this review is intended as starting point and inspiration for future research effort to develop the next generation of tissue-engineering scaffold materials.

Correlating Nanoscale Optical Coherence Length and Microscale Topography in Organic Materials by Coherent Two-Dimensional Microspectroscopy

Many nanotechnology materials rely on a hierarchical structure ranging from the nanometer scale to the micrometer scale. Their interplay determines the nanoscale optical coherence length, which plays a key role in energy transport and radiative decay and, thus, the optoelectronic applications. However, it is challenging to detect optical coherence length in multiscale structures with existing methods. Techniques such as atomic force microscopy and transmission electron microscopy are not sensitive to optical coherence length. Linear absorption and fluorescence spectroscopy methods, on the other hand, were generally limited by inhomogeneous broadening, which often obstructs the determination of nanoscale coherence length. Here, we carry out coherent two-dimensional microspectroscopy to obtain a map of the local optical coherence length within a hierarchically structured molecular film. Interestingly, the nanoscale coherence length is found to correlate with microscale topography, suggesting a perspective for controlling structural coherence on molecular length scales by appropriate microscopic growth conditions.

Recent Advances on Synthetic and Polysaccharide Adhesives for Biological Hemostatic Applications

Rapid hemostasis and formation of stable blood clots are very important to prevent massive blood loss from the excessive bleeding for living body, but their own clotting process cannot be completed in time for effective hemostasis without the help of hemostatic materials. In general, traditionally suturing and stapling techniques for wound closure are prone to cause the additional damages to the tissues, activated inflammatory responses, short usage periods and inevitable second operations in clinical applications. Especially for the large wounds that require the urgent closure of fluids or gases, these conventional closure methods are far from enough. To address these problems, various tissue adhesives, sealants and hemostatic materials are placed great expectation. In this review, we focused on the development of two main categories of tissue adhesive materials: synthetic polymeric adhesives and naturally derived polysaccharide adhesives. Research of the high performance of hemostatic adhesives with strong adhesion, better biocompatibility, easy usability and cheap price is highly demanded for both scientists and clinicians, and this review is also intended to provide a comprehensive summarization and inspiration for pursuit of more advanced hemostatic adhesives for biological fields.

Advances of Naturally Derived and Synthetic Hydrogels for Intervertebral Disk Regeneration

Intervertebral disk (IVD) degeneration is associated with most cases of cervical and lumbar spine pathologies, amongst which chronic low back pain has become the primary cause for loss of quality-adjusted life years. Biomaterials science and tissue engineering have made significant progress in the replacement, repair and regeneration of IVD tissue, wherein hydrogel has been recognized as an ideal biomaterial to promote IVD regeneration in recent years. Aspects such as ease of use, mechanical properties, regenerative capacity, and their applicability as carriers for regenerative and anti-degenerative factors determine their suitability for IVD regeneration. This current review provides an overview of naturally derived and synthetic hydrogels that are related to their clinical applications for IVD regeneration. Although each type has its own unique advantages, it rarely becomes a standard product in truly clinical practice, and a more rational design is proposed for future use of biomaterials for IVD regeneration. This review aims to provide a starting point and inspiration for future research work on development of novel biomaterials and biotechnology.

Long-term delivery of alendronate through an injectable tetra-PEG hydrogel to promote osteoporosis therapy

Pharmacotherapy for hypercalcemia, which is mainly caused by osteoporosis, is an effective method to regulate the in vivo calcium equilibrium. From this perspective, the development of a minimally invasive gelling system for the prolonged local delivery of bisphosphonates has practical significance in the clinical therapy of bone osteoporosis. Here, a biocompatible and injectable hydrogel based on a uniform tetra-PEG network carrying a PEG-modified alendronate (ALN) prodrug for the localized elution and long-term sustained release of anti-osteoporotic small molecule drugs is reported. The obtained ALN-based tetra-PEG hydrogels exhibit rapid gel formation and excellent injectability, thereby allowing for the easy injection and consequent adaptation of hydrogels into the bone defects with irregular shapes, which promotes the ALN-based tetra-PEG hydrogels with depot formulation capacity for governing the on-demand release of ALN drugs and local reinforcement of bone osteoporosis at the implantation sites of animals. The findings imply that these injectable hydrogels mediate the optimized release of therapeutic cargoes and effectively promote in situ bone regeneration via minimally invasive procedures, which is effective for clinical osteoporosis therapy.

Progressive 3D Printing Technology and Its Application in Medical Materials

Three-dimensional (3D) printing enables patient-specific anatomical level productions with high adjustability and resolution in microstructures. With cost-effective manufacturing for high productivity, 3D printing has become a leading healthcare and pharmaceutical manufacturing technology, which is suitable for variety of applications including tissue engineering models, anatomical models, pharmacological design and validation model, medical apparatus and instruments. Today, 3D printing is offering clinical available medical products and platforms suitable for emerging research fields, including tissue and organ printing. In this review, our goal is to discuss progressive 3D printing technology and its application in medical materials. The additive overview also provides manufacturing techniques and printable materials.

An Injectable and Instant Self-Healing Medical Adhesive for Wound Sealing

Designing versatile functional medical adhesives with injectability, self-healing, and strong adhesion is of great significance to achieve desirable therapeutic effects for promoting wound sealing in healthcare. Herein, a self-healing injectable adhesive is fabricated by physical interaction of polyphenol compound tannic acid (TA) and eight-arm poly(ethylene glycol) end-capped with succinimide glutarate active ester (PEG-SG). The hydrogen bonding induced from the structural unit (-CH₂-CH₂-O-) of PEG and catechol hydroxyl (-OH) of TA, accompanied by ester exchange between N-hydroxysuccinimide (-NHS) and amino (-NH₂) of proteins, contributes to self-healing ability and rapid strong adhesion. Notably, the PEG/TA adhesive can repeatedly adhere to rigid porcine tissues, close the coronary artery under a large incision tension, and bear a heavy load of 2 kg. By exhibiting shear-thinning and anti-swelling properties, the PEG/TA adhesive can be easily applied through single-syringe extrusion onto various wounds. The single-channel toothpaste-like feature of the adhesive ensures its storage hermetically for portable usage. Moreover, in vivo operation and histological H&E staining results indicate that the PEG/TA adhesive greatly accelerates wound healing and tissue regeneration in a rat model. With the specialty of injectability, instant self-healing, and long-lasting strong adhesion to facilitate excellent therapeutic effects, the multifunctional PEG/TA adhesive may provide a new alternative for self-rescue and surgical situations.

Hierarchical Self-assembly of Well-Defined Louver-Like P-Doped Carbon Nitride Nanowire Arrays with Highly Efficient Hydrogen Evolution

Self-assembled nanostructure arrays integrating the advantages of the intrinsic characters of nanostructure as well as the array stability are appealing in advanced materials. However, the precise bottom-up synthesis of nanostructure arrays without templates or substrates is quite challenging because of the general occurrence of homogeneous nucleation and the difficult manipulation of noncovalent interactions. Herein, we first report the precisely manipulated synthesis of well-defined louver-like P-doped carbon nitride nanowire arrays (L-PCN) via a supramolecular self-assembly method by regulating the noncovalent interactions through hydrogen bond. With this strategy, CN nanowires align in the outer frame with the separation and spatial location achieving ultrastability and outstanding photoelectricity properties. Significantly, this self-assembly L-PCN exhibits a superior visible light-driven hydrogen evolution activity of 1872.9 μmol h-1 g-1, rendering a ~ 25.6-fold enhancement compared to bulk CN, and high photostability. Moreover, an apparent quantum efficiency of 6.93% is achieved for hydrogen evolution at 420 ± 15 nm. The experimental results and first-principles calculations demonstrate that the remarkable enhancement of photocatalytic activity of L-PCN can be attributed to the synergetic effect of structural topology and dopant. These findings suggest that we are able to design particular hierarchical nanostructures with desirable performance using hydrogen-bond engineering.

Advancements and Frontiers in the High Performance of Natural Hydrogels for Cartilage Tissue Engineering

Cartilage injury originating from trauma or osteoarthritis is a common joint disease that can bring about an increasing social and economic burden in modern society. On account of its avascular, neural, and lymphatic characteristics, the poor migration ability of chondrocytes, and a low number of progenitor cells, the self-healing ability of cartilage defects has been significantly limited. Natural hydrogels, occurring abundantly with characteristics such as high water absorption, biodegradation, adjustable porosity, and biocompatibility like that of the natural extracellular matrix (ECM), have been developed into one of the most suitable scaffold biomaterials for the regeneration of cartilage in material science and tissue engineering. Notably, natural hydrogels derived from sources such as animal or human cadaver tissues possess the bionic mechanical behaviors of physiological cartilage that are required for usage as articular cartilage substitutes, by which the enhanced chondrogenic phenotype ability may be achieved by facilely embedding living cells, controlling degradation profiles, and releasing stimulatory growth factors. Hence, we summarize an overview of strategies and developments of the various kinds and functions of natural hydrogels for cartilage tissue engineering in this review. The main concepts and recent essential research found that great challenges like vascularity, clinically relevant size, and mechanical performances were still difficult to overcome because the current limitations of technologies need to be severely addressed in practical settings, particularly in unpredictable preclinical trials and during future forays into cartilage regeneration using natural hydrogel scaffolds with high mechanical properties. Therefore, the grand aim of this current review is to underpin the importance of preparation, modification, and application for the high performance of natural hydrogels for cartilage tissue engineering, which has been achieved by presenting a promising avenue in various fields and postulating real-world respective potentials.

A pH and UCST thermo-responsive tri-block copolymer (PAA-b-PDMA-b-P(AM-co-AN)) with micellization and gelatinization in aqueous media for drug release

A brand new pH and thermo-responsive amphiphilic ABC triblock copolymer of poly(acrylic acid)-block-poly(N,N-dimethyl acrylamide)-block-poly(acrylamide-co-acrylonitrile) (PAA-b-PDMA-b-P(AM-co-AN)) was applied as drug carrier systems.

Fabrication of Customized Nanogel Carriers From a UV-Triggered Dynamic Self-Assembly Strategy

Recent advances in self-assembled nanogel carriers have allowed precise design of hierarchical structures by a low-cost solution-phase approach. Typically, photochemical strategy on the tailor of morphology and dimension has emerged as a powerful tool, because light-trigger has exceptional advantages of an instant "on/off" function and spatiotemporal precision at arbitrary time. Herein, we report a tunable manipulation of sequentially morphological transition via a "living" thiol-disulfide exchange reaction from a UV-tailored hierarchical self-assembly strategy. By varying the irradiation time, the photochemical method can easily fabricate and guide a series of attractively architectural evolution in dilute aqueous solutions, by which the improving hydrophobicity and sensitive redox-responsiveness endowed these disulfide-linked nanoparticles with remarkable capacities of abundant encapsulation, effective separation, and controlled release of hydrophobic cargoes. Notably, once the exchange reaction is suspended at any point of time by removing the UV lamp, these active sites within the nanogel carriers are instantaneous deactivated and the correspondingly structural transformations are also not conducted any more. However, if the stable inert sites are reactivated as needed by turning on the UV light, the interrupting morphology evolution can continue its previous steps, which may provide a simple and novel approach to fabricating the desired self-assemblies in solutions. With regard to this advanced functionality, various nanogel carriers with customizable structures and properties have been yielded and screened for cancer therapy. Thus, this "living" controlled self-assembled method to program morphology evolution in situ is a universal strategy that will pave novel pathways for creating sequential shape-shifting and size-growing nanostructures and constructing uniform nanoscopic functional entities for advanced bio-applications.

Controllable hierarchical self-assembly of porphyrin-derived supra-amphiphiles

Control of self-assembly is significant to the preparation of supramolecular materials and illustration of diversities in either natural or artificial systems. Supra-amphiphiles have remarkable advantages in the construction of nanostructures but control of shape and size of supramolecular nanostructures is still a great challenge. Here, we fabricate a series of supra-amphiphiles by utilizing the recognition motifs based on a heteroditopic porphyrin amphiphile and its zinc complex. These porphyrin amphiphiles can bind with a few guests including Cl^-, coronene, C₆₀, 4,4'-bipyridine and 2,4,6-tri(pyridin-4-yl)-1,3,5-triazine, which are further applied to facilitate the controllable self-assembly. Addition of these guests result in the formation of various supra-amphiphiles with well-defined structures, thus induce the generation of different aggregates. A diverse of aggregation morphologies including nanospheres, nanorods, films, spheric micelles, vesicles and macrowires are constructed upon the influence of specific complexation, which highlights the present work with abundant control on the shapes and dimensions of self-assemblies.

POSS-based supramolecular amphiphilic zwitterionic complexes for drug delivery

A novel POSS-based supramolecular amphiphilic zwitterionic polymer exhibited excellent stability in both extracellular and intracellular pH environments and well encapsulated the antitumor drug DOX, and has the potential to improve smart drug delivery and enhance antitumor efficacy for biomedical applications.

In situ bone regeneration enabled by a biodegradable hybrid double-network hydrogel

The biodegradable hybrid double-network hydrogel for stem cell-enhanced bone regeneration.

Fabrication of zwitterionic and pH-responsive polyacetal dendrimers for anticancer drug delivery

A zwitterionic sulfobetaine functionalized polyacetal dendrimer presented excellent structural stability, high internalization efficiency, unique pH-responsive drug release behaviors and remarkable antitumor efficacy.

Surfactant Free Delivery of Docetaxel by Poly[(R)-3-hydroxybutyrate-(R)-3-hydroxyhexanoate]-Based Polymeric Micelles for Effective Melanoma Treatments

Docetaxel (DTX) is a new semisynthetic chemical in the taxoid family and serves a wide spectrum of chemotherapeutics. Current commercial formulation of DTX is based on the addition of the nonionic surfactants (i.e., ethanol and Tween 80), which are reported to cause severe hemolysis, hypersensitivity reactions, or neurotoxic toxicity and greatly hinders patient tolerance or compliance. In this report, a novel low-toxic, biodegradable, and amphiphilic poly[(R)-3-hydroxybutyrate-(R)-3-hydroxyhexanoate] (PHBHx)-based polyurethane (a copolymer made of hydrophobic PHBHx with biocompatible D-3-hydroxybutyric acid as degradation product, thermosensitive polypropylene glycol (PPG), and hydrophilic polyethylene glycol (PEG) segments) with nanosized micelle formation ability to encapsulate DTX, as a surfactant free formulation, is reported. Interestingly, this DTX-loaded poly(PHBHx/PEG/PPG urethane) micelle formulation with >90% drug loading efficiency shows significantly improved DTX solubility in aqueous medium, reduced hemolysis for better blood compatibility, and increased drug uptake in A375 melanoma cells, which provides the possibility of systematic delivery of DTX. As a proof-of-concept, an A375 melanoma xenograft mouse model is established to verify the therapeutic effect of this DTX-loaded poly(PHBHx/PEG/PPG urethane) micelle formulation, indicating the promising application of PHBHx-based polymeric nanosized micelle as a surfactant free formulation of chemotherapeutics which might greatly be beneficial for controllable delivery of pharmaceutics and cancer therapy.

Self-Assembly and Applications of Amphiphilic Hybrid POSS Copolymers

Understanding the mechanism of molecular self-assembly to form well-organized nanostructures is essential in the field of supramolecular chemistry. Particularly, amphiphilic copolymers incorporated with polyhedral oligomeric silsesquioxanes (POSSs) have been one of the most promising materials in material science, engineering, and biomedical fields. In this review, new ideas and research works which have been carried out over the last several years in this relatively new area with a main focus on their mechanism in self-assembly and applications are discussed. In addition, insights into the unique role of POSSs in synthesis, microphase separation, and confined size were encompassed. Finally, perspectives and challenges related to the further advancement of POSS-based amphiphilics are discussed, followed by the proposed design considerations to address the challenges that we may face in the future.

Fabrication of POSS-embedded supramolecular hyperbranched polymers with multi-responsive morphology transitions

We demonstrate a simple approach to prepare POSS-embedded supramolecular hyperbranched polymers with multiple stimulus morphology transitions driven by triple supramolecular driving forces in selective solvents.