1
|
Wen S, Zhao H, Zhang Y, Cao D, Liu M, Yang H, Zhang W. Multifunctional Nanofiber Membranes Constructed by Microfluidic Blow-Spinning to Inhibit Scar Formation at Early Intervention Stage. ACS APPLIED MATERIALS & INTERFACES 2024; 16:53042-53059. [PMID: 39298643 DOI: 10.1021/acsami.4c13561] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/22/2024]
Abstract
Pathological scarring has been a challenge in skin injury repair since ancient times, and prophylactic treatment in the early stages of wound healing usually results in delayed wound healing. In this study, poly(ethylene oxide) (PEO) and chitosan (CTS) were used as carrier materials to construct multifunctional pirfenidone (PFD)/CTS/PEO (PCP) nanofiber membranes (NFMs) loaded with PFD by microfluidic blow-spinning (MBS). MBS is a good method for quickly, safely, and greenly constructing large-area manufacturing of inexpensive NFMs. PCP NFMs were uniform in external morphology, with diameters ranging from 200 to 500 nm. The encapsulation efficiency of the drug-loaded PCP NFMs was above 80%, which had a good slow release, visualization, water absorption, and biocompatibility. The inhibitory effect of PCP NFMs on normal human dermal fibroblasts was dose-dependent and inhibited the expression of the transforming growth factor-β1/SMAD family member 3 (TGF-β1/SMAD3) signaling pathway. PCP NFMs showed significant antibacterial effects against both Staphylococcus aureus and Escherichia coli. In the rabbit ear scar experiment, the wound healed about 70% on day 5 and almost completely on day 10 after PCP-3 NFMs treatment, with the thinnest scar tissue, skin color, tenderness close to normal tissue, and a Vancouver scar scale score of less than 5. PCP-3 NFMs had good effects on anti-inflammatory, wound healing, and collagen-I deposition reducing effects. In conclusion, PCP-3 NFMs can both promote wound healing and intervene to inhibit pathological scarring in advance, making them a potential multifunctional wound dressing for early prevention and treatment of pathological scarring.
Collapse
Affiliation(s)
- Shengxiu Wen
- College of Pharmacy, Shandong Second Medical University, Weifang, Shandong 261053, China
| | - Hanqiang Zhao
- College of Pharmacy, Shandong Second Medical University, Weifang, Shandong 261053, China
- Department of Pharmacy, Handan First Hospital, Handan, Hebei 056002, China
| | - Ying Zhang
- College of Pharmacy, Shandong Second Medical University, Weifang, Shandong 261053, China
| | - Dadong Cao
- College of Pharmacy, Shandong Second Medical University, Weifang, Shandong 261053, China
| | - Meijun Liu
- College of Pharmacy, Shandong Second Medical University, Weifang, Shandong 261053, China
| | - Hongming Yang
- College of Pharmacy, Shandong Second Medical University, Weifang, Shandong 261053, China
| | - Weifen Zhang
- College of Pharmacy, Shandong Second Medical University, Weifang, Shandong 261053, China
- Shandong Engineering Research Center for Smart Materials and Regenerative Medicine, Shandong Second Medical University, Weifang, Shandong 261053, China
| |
Collapse
|
2
|
Patra A, Rout CS. Unveiling the Hidden Potential of Two-Dimensional Black Phosphorus for Advanced Supercapacitor Applications. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:18781-18790. [PMID: 39194011 DOI: 10.1021/acs.langmuir.4c00874] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/29/2024]
Abstract
In response to the contemporary energy crisis, researchers have intensified efforts to explore green and renewable energy sources alongside developing robust energy storage devices. Supercapacitors stand out among various storage options due to their high-power density and rapid charge-discharge cycles. However, their lower energy density poses a challenge, leading to exploration of diverse electrode materials, including black phosphorus (BP). BP, with its two-dimensional (2D) layered structure akin to graphene, exhibits exceptional properties, making it a promising candidate for various applications, including energy storage. This Perspective focuses on the properties of BP as an electrode material for supercapacitors, covering electrochemical performance, charge storage mechanisms, and synthesis methods. Challenges such as restacking and stability have prompted innovative strategies to enhance BP-based supercapacitors, both qualitatively and quantitatively. Furthermore, the fabrication of BP-based hybrid nanocomposites with carbonaceous polymers, conducting polymers, and other 2D materials is discussed, highlighting their efficacy as electrode materials along with future outlooks.
Collapse
Affiliation(s)
- Abhinandan Patra
- Centre for Nano and Material Sciences, Jain (Deemed-to-be) University, Jain Global Campus Kanakapura Road, Bangalore 562112, Karnataka, India
| | - Chandra Sekhar Rout
- Centre for Nano and Material Sciences, Jain (Deemed-to-be) University, Jain Global Campus Kanakapura Road, Bangalore 562112, Karnataka, India
- Department of Chemical Engineering, Chungbuk National University, Cheongju, Chungbuk 28644, Republic of Korea
| |
Collapse
|
3
|
Wu X, Chen A, Yu X, Tian Z, Li H, Jiang Y, Xu J. Microfluidic Synthesis of Multifunctional Micro-/Nanomaterials from Process Intensification: Structural Engineering to High Electrochemical Energy Storage. ACS NANO 2024. [PMID: 39086355 DOI: 10.1021/acsnano.4c07599] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/02/2024]
Abstract
Multifunctional micro-/nanomaterials featuring functional superiority and high value-added physicochemical nature have received immense attention in electrochemical energy storage. Microfluidic synthesis has become an emergent technology for massively producing multifunctional micro-/nanomaterials with tunable microstructure and morphology due to its rapid mass/heat transfer and precise fluid controllability. In this review, the latest progresses and achievements in microfluidic-synthesized multifunctional micro-/nanomaterials are summarized via reaction process intensification, multifunctional micro-/nanostructural engineering and electrochemical energy storage applications. The reaction process intensification mechanisms of various micro-/nanomaterials, including quantum dots (QDs), metal materials, conducting polymers, metallic oxides, polyanionic compounds, metal-organic frameworks (MOFs) and two-dimensional (2D) materials, are discussed. Especially, the multifunctional structural engineering principles of as-fabricated micro-/nanomaterials, such as vertically aligned structure, heterostructure, core-shell structure, and tunable microsphere, are introduced. Subsequently, the electrochemical energy storage application of as-prepared multifunctional micro-/nanomaterials is clarified in supercapacitors, lithium-ion batteries, sodium-ion batteries, all-vanadium redox flow batteries, and dielectric capacitors. Finally, the current problems and future forecasts are illustrated.
Collapse
Affiliation(s)
- Xingjiang Wu
- National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China
| | - An Chen
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, P. R. China
| | - Xude Yu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, P. R. China
| | - Zhicheng Tian
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, P. R. China
| | - Hao Li
- National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China
| | - Yanjun Jiang
- National-Local Joint Engineering Laboratory for Energy Conservation in Chemical Process Integration and Resources Utilization, School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China
| | - Jianhong Xu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, P. R. China
| |
Collapse
|
4
|
Wang X, Hu L. Turning powders into fibre via cellulose. NATURE MATERIALS 2024; 23:579-580. [PMID: 38702542 DOI: 10.1038/s41563-024-01861-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/06/2024]
Affiliation(s)
- Xizheng Wang
- Department of Mechanical and Aerospace Engineering, University of California, Irvine, CA, USA.
- Department of Materials Science and Engineering, University of California, Irvine, CA, USA.
| | - Liangbing Hu
- Department of Materials Science and Engineering, University of Maryland, College Park, MD, USA.
| |
Collapse
|
5
|
Erazo-Oliveras A, Muñoz-Vega M, Salinas ML, Wang X, Chapkin RS. Dysregulation of cellular membrane homeostasis as a crucial modulator of cancer risk. FEBS J 2024; 291:1299-1352. [PMID: 36282100 PMCID: PMC10126207 DOI: 10.1111/febs.16665] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2022] [Revised: 09/09/2022] [Accepted: 10/24/2022] [Indexed: 11/07/2022]
Abstract
Cellular membranes serve as an epicentre combining extracellular and cytosolic components with membranous effectors, which together support numerous fundamental cellular signalling pathways that mediate biological responses. To execute their functions, membrane proteins, lipids and carbohydrates arrange, in a highly coordinated manner, into well-defined assemblies displaying diverse biological and biophysical characteristics that modulate several signalling events. The loss of membrane homeostasis can trigger oncogenic signalling. More recently, it has been documented that select membrane active dietaries (MADs) can reshape biological membranes and subsequently decrease cancer risk. In this review, we emphasize the significance of membrane domain structure, organization and their signalling functionalities as well as how loss of membrane homeostasis can steer aberrant signalling. Moreover, we describe in detail the complexities associated with the examination of these membrane domains and their association with cancer. Finally, we summarize the current literature on MADs and their effects on cellular membranes, including various mechanisms of dietary chemoprevention/interception and the functional links between nutritional bioactives, membrane homeostasis and cancer biology.
Collapse
Affiliation(s)
- Alfredo Erazo-Oliveras
- Program in Integrative Nutrition and Complex Diseases; Texas A&M University; College Station, Texas, 77843; USA
- Department of Nutrition; Texas A&M University; College Station, Texas, 77843; USA
| | - Mónica Muñoz-Vega
- Program in Integrative Nutrition and Complex Diseases; Texas A&M University; College Station, Texas, 77843; USA
- Department of Nutrition; Texas A&M University; College Station, Texas, 77843; USA
| | - Michael L. Salinas
- Program in Integrative Nutrition and Complex Diseases; Texas A&M University; College Station, Texas, 77843; USA
- Department of Nutrition; Texas A&M University; College Station, Texas, 77843; USA
| | - Xiaoli Wang
- Program in Integrative Nutrition and Complex Diseases; Texas A&M University; College Station, Texas, 77843; USA
- Department of Nutrition; Texas A&M University; College Station, Texas, 77843; USA
| | - Robert S. Chapkin
- Program in Integrative Nutrition and Complex Diseases; Texas A&M University; College Station, Texas, 77843; USA
- Department of Nutrition; Texas A&M University; College Station, Texas, 77843; USA
- Center for Environmental Health Research; Texas A&M University; College Station, Texas, 77843; USA
| |
Collapse
|
6
|
Chao Y, Han Y, Chen Z, Chu D, Xu Q, Wallace G, Wang C. Multiscale Structural Design of 2D Nanomaterials-based Flexible Electrodes for Wearable Energy Storage Applications. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2305558. [PMID: 38115755 PMCID: PMC10916616 DOI: 10.1002/advs.202305558] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2023] [Revised: 11/22/2023] [Indexed: 12/21/2023]
Abstract
2D nanomaterials play a critical role in realizing high-performance flexible electrodes for wearable energy storge devices, owing to their merits of large surface area, high conductivity and high strength. The electrode is a complex system and the performance is determined by multiple and interrelated factors including the intrinsic properties of materials and the structures at different scales from macroscale to atomic scale. Multiscale design strategies have been developed to engineer the structures to exploit full potential and mitigate drawbacks of 2D materials. Analyzing the design strategies and understanding the working mechanisms are essential to facilitate the integration and harvest the synergistic effects. This review summarizes the multiscale design strategies from macroscale down to micro/nano-scale structures and atomic-scale structures for developing 2D nanomaterials-based flexible electrodes. It starts with brief introduction of 2D nanomaterials, followed by analysis of structural design strategies at different scales focusing on the elucidation of structure-property relationship, and ends with the presentation of challenges and future prospects. This review highlights the importance of integrating multiscale design strategies. Finding from this review may deepen the understanding of electrode performance and provide valuable guidelines for designing 2D nanomaterials-based flexible electrodes.
Collapse
Affiliation(s)
- Yunfeng Chao
- Henan Institute of Advanced TechnologyZhengzhou UniversityZhengzhou450052China
- Intelligent Polymer Research InstituteARC Centre of Excellence for Electromaterials ScienceAIIM FacilityInnovation CampusUniversity of WollongongWollongongNSW2522Australia
| | - Yan Han
- Energy & Materials Engineering CentreCollege of Physics and Materials ScienceTianjin Normal UniversityTianjin300387China
| | - Zhiqi Chen
- Intelligent Polymer Research InstituteARC Centre of Excellence for Electromaterials ScienceAIIM FacilityInnovation CampusUniversity of WollongongWollongongNSW2522Australia
| | - Dewei Chu
- School of Materials Science and EngineeringThe University of New South WalesSydneyNSW2052Australia
| | - Qun Xu
- Henan Institute of Advanced TechnologyZhengzhou UniversityZhengzhou450052China
| | - Gordon Wallace
- Intelligent Polymer Research InstituteARC Centre of Excellence for Electromaterials ScienceAIIM FacilityInnovation CampusUniversity of WollongongWollongongNSW2522Australia
| | - Caiyun Wang
- Intelligent Polymer Research InstituteARC Centre of Excellence for Electromaterials ScienceAIIM FacilityInnovation CampusUniversity of WollongongWollongongNSW2522Australia
| |
Collapse
|
7
|
Sun Y, Jiang D, Wang J, Zhang A, Wang C, Zong H, Xu J, Liu J. Construction of Binder-Free, Self-Supported, Hetero-Core-Shell Honeycomb Structured CuCo 2 O 4 @Ni 0.5 Co 0.5 (OH) 2 with Abundant Mesopores and High Conductivity for High-Performance Energy Storage. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2305288. [PMID: 37775328 DOI: 10.1002/smll.202305288] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/25/2023] [Revised: 08/29/2023] [Indexed: 10/01/2023]
Abstract
Clever and rational design of structural hierarchy, along with precise component adjustment, holds profound significance for the construction of high-performance supercapacitor electrode materials. In this study, a binder-free self-supported CCO@N0.5 C0.5 OH/NF cathode material is constructed with hierarchical hetero-core-shell honeycomb nanostructure by first growing CuCo2 O4 (CCO) nanopin arrays uniformly on highly conductive nickel foam (NF) substrate, and then anchoring Ni0.5 Co0.5 (OH)2 (N0.5 C0.5 OH) bimetallic hydroxide nanosheet arrays on the CCO nanopin arrays by adjusting the molar ratio of Ni(OH)2 and Co(OH)2 . The constructed CCO@N0.5 C0.5 OH/NF electrode material showcases a wealth of multivalent metal ions and mesopores, along with good electrical conductivity, excellent electrochemical reaction rates, and robust long-term performance (capacitance retention rate of 87.2%). The CCO@N0.5 C0.5 OH/NF electrode, benefiting from the hierarchical structure of the material and the exceptional synergy between multiple components, demonstrates an excellent specific capacitance (2553.6 F g-1 at 1 A g-1 ). Furthermore, the assembled asymmetric CCO@N0.5 C0.5 OH/NF//AC/NF supercapacitor demonstrates a high energy density (70.1 Wh kg-1 at 850 W kg-1 ), and maintains robust capacitance cycling stability performance (83.7%) after undergoing 10 000 successive charges and discharges. It is noteworthy that the assembled supercapacitor exhibits an operating voltage (1.7 V) that is well above the theoretical value (1.5 V).
Collapse
Affiliation(s)
- Yuesheng Sun
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Ningxia Road 308, Qingdao, 266071, China
| | - Degang Jiang
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Ningxia Road 308, Qingdao, 266071, China
- Institute for Frontier Materials, Deakin University, Geelong Waurn Ponds Campus, Geelong, Victoria, 3216, Australia
| | - Jianhua Wang
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Ningxia Road 308, Qingdao, 266071, China
| | - Aitang Zhang
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Ningxia Road 308, Qingdao, 266071, China
| | - Chunxiao Wang
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Ningxia Road 308, Qingdao, 266071, China
| | - Hanwen Zong
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Ningxia Road 308, Qingdao, 266071, China
| | - Jiangtao Xu
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Ningxia Road 308, Qingdao, 266071, China
| | - Jingquan Liu
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Qingdao University, Ningxia Road 308, Qingdao, 266071, China
| |
Collapse
|
8
|
Yu X, Liu H, Ling S, Wu X, Lian C, Xu J. Microfluidic Printing of Vertically-Oriented Nanosheets/MOFs Hetero-Interface for Intensive Pseudocapacitive Storage. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2305396. [PMID: 37797184 DOI: 10.1002/smll.202305396] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2023] [Revised: 09/16/2023] [Indexed: 10/07/2023]
Abstract
Efficient manufacture of electroactive vertically-oriented nanosheets with enhanced electrolyte mass diffusion and strong interfacial redox dynamics is critical for realizing high energy density of miniature supercapacitor (SC), but still challenging. Herein, microfluidic droplet printing is developed to controllably construct vertically-oriented graphene/ZIF-67 hetero-microsphere (VAGS/ZIF-67), where the ZIF-67 is coordinately grown on vertically-oriented graphene framework via Co─O─C bonds. The VAGS/ZIF-67 shows ordered porous channel, high electroactivity and strong interfacial interaction, providing rapid electrolyte diffusion dynamics and high faradaic capacitance in KOH solution (1674 F g-1 , 1004 C g-1 ), which are verified by computational fluid dynamics (CFD) and density functional theory (DFT). Moreover, the VAGS/ZIF-67 based SC exhibits large energy density (100 Wh kg-1 ), excellent durability (10 000 cycles and high/low temperature), and robust power-supply applications in portable electronics.
Collapse
Affiliation(s)
- Xude Yu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Hengyuan Liu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Sida Ling
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Xingjiang Wu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Cheng Lian
- The State Key Laboratory of Chemical Engineering and Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Chemical Engineering, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai, 200237, China
| | - Jianhong Xu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, P. R. China
| |
Collapse
|
9
|
He Q, Sheng B, Zhu K, Zhou Y, Qiao S, Wang Z, Song L. Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials. Chem Rev 2023; 123:10750-10807. [PMID: 37581572 DOI: 10.1021/acs.chemrev.3c00389] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/16/2023]
Abstract
In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.
Collapse
Affiliation(s)
- Qun He
- National Synchrotron Radiation Laboratory, CAS Center for Excellence in Nanoscience, University of Science and Technology of China, Hefei, Anhui 230029, China
| | - Beibei Sheng
- National Synchrotron Radiation Laboratory, CAS Center for Excellence in Nanoscience, University of Science and Technology of China, Hefei, Anhui 230029, China
| | - Kefu Zhu
- National Synchrotron Radiation Laboratory, CAS Center for Excellence in Nanoscience, University of Science and Technology of China, Hefei, Anhui 230029, China
| | - Yuzhu Zhou
- National Synchrotron Radiation Laboratory, CAS Center for Excellence in Nanoscience, University of Science and Technology of China, Hefei, Anhui 230029, China
| | - Sicong Qiao
- National Synchrotron Radiation Laboratory, CAS Center for Excellence in Nanoscience, University of Science and Technology of China, Hefei, Anhui 230029, China
| | - Zhouxin Wang
- National Synchrotron Radiation Laboratory, CAS Center for Excellence in Nanoscience, University of Science and Technology of China, Hefei, Anhui 230029, China
| | - Li Song
- National Synchrotron Radiation Laboratory, CAS Center for Excellence in Nanoscience, University of Science and Technology of China, Hefei, Anhui 230029, China
- Zhejiang Institute of Photonelectronics, Jinhua, Zhejiang 321004, China
| |
Collapse
|
10
|
Tian H, Wang J, Lai G, Dou Y, Gao J, Duan Z, Feng X, Wu Q, He X, Yao L, Zeng L, Liu Y, Yang X, Zhao J, Zhuang S, Shi J, Qu G, Yu XF, Chu PK, Jiang G. Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment. Chem Soc Rev 2023; 52:5388-5484. [PMID: 37455613 DOI: 10.1039/d2cs01018f] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/18/2023]
Abstract
The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.
Collapse
Affiliation(s)
- Haijiang Tian
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
- Key Laboratory of Environment Remediation and Ecological Health, Ministry of Education, College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058, P. R. China
| | - Jiahong Wang
- Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, P. R. China.
- Hubei Three Gorges Laboratory, Yichang, Hubei 443007, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Gengchang Lai
- Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, P. R. China.
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Yanpeng Dou
- Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, P. R. China.
- Hubei Three Gorges Laboratory, Yichang, Hubei 443007, P. R. China
| | - Jie Gao
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
- School of Environment, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China
| | - Zunbin Duan
- Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, P. R. China.
- Hubei Three Gorges Laboratory, Yichang, Hubei 443007, P. R. China
| | - Xiaoxiao Feng
- Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, P. R. China.
| | - Qi Wu
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
- School of Environment, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China
| | - Xingchen He
- Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, P. R. China.
- Hubei Three Gorges Laboratory, Yichang, Hubei 443007, P. R. China
| | - Linlin Yao
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
| | - Li Zeng
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
| | - Yanna Liu
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
| | - Xiaoxi Yang
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
| | - Jing Zhao
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
- School of Environment, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China
| | - Shulin Zhuang
- Key Laboratory of Environment Remediation and Ecological Health, Ministry of Education, College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058, P. R. China
| | - Jianbo Shi
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
- School of Environment, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Guangbo Qu
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
- School of Environment, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Xue-Feng Yu
- Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, P. R. China.
- Hubei Three Gorges Laboratory, Yichang, Hubei 443007, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Paul K Chu
- Department of Physics, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong, China
- Department of Materials Science and Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong, China
- Department of Biomedical Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong, China
| | - Guibin Jiang
- State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, P. R. China.
- Key Laboratory of Environment Remediation and Ecological Health, Ministry of Education, College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058, P. R. China
- School of Environment, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou 310024, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| |
Collapse
|
11
|
Ismail KBM, Arun Kumar M, Mahalingam S, Kim J, Atchudan R. Recent Advances in Molybdenum Disulfide and Its Nanocomposites for Energy Applications: Challenges and Development. MATERIALS (BASEL, SWITZERLAND) 2023; 16:4471. [PMID: 37374654 DOI: 10.3390/ma16124471] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/01/2023] [Revised: 06/13/2023] [Accepted: 06/16/2023] [Indexed: 06/29/2023]
Abstract
Energy storage and conversion are critical components of modern energy systems, enabling the integration of renewable energy sources and the optimization of energy use. These technologies play a key role in reducing greenhouse gas emissions and promoting sustainable development. Supercapacitors play a vital role in the development of energy storage systems due to their high power density, long life cycles, high stability, low manufacturing cost, fast charging-discharging capability and eco-friendly. Molybdenum disulfide (MoS2) has emerged as a promising material for supercapacitor electrodes due to its high surface area, excellent electrical conductivity, and good stability. Its unique layered structure also allows for efficient ion transport and storage, making it a potential candidate for high-performance energy storage devices. Additionally, research efforts have focused on improving synthesis methods and developing novel device architectures to enhance the performance of MoS2-based devices. This review article on MoS2 and MoS2-based nanocomposites provides a comprehensive overview of the recent advancements in the synthesis, properties, and applications of MoS2 and its nanocomposites in the field of supercapacitors. This article also highlights the challenges and future directions in this rapidly growing field.
Collapse
Affiliation(s)
- Kamal Batcha Mohamed Ismail
- Department of Electrical, Electronics and Communication Engineering, School of Technology, Gandhi Institute of Technology and Management (GITAM), Bengaluru 561203, Karnataka, India
- Department of Electronics and Communication Engineering, Agni College of Technology, Chennai 600130, Tamil Nadu, India
| | - Manoharan Arun Kumar
- Department of Electrical, Electronics and Communication Engineering, School of Technology, Gandhi Institute of Technology and Management (GITAM), Bengaluru 561203, Karnataka, India
| | - Shanmugam Mahalingam
- Department of Materials System Engineering, Pukyong National University, Busan 48513, Republic of Korea
| | - Junghwan Kim
- Department of Materials System Engineering, Pukyong National University, Busan 48513, Republic of Korea
| | - Raji Atchudan
- School of Chemical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea
- Department of Chemistry, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai 602105, Tamil Nadu, India
| |
Collapse
|
12
|
Kumar N, Ghosh S, Thakur D, Lee CP, Sahoo PK. Recent advancements in zero- to three-dimensional carbon networks with a two-dimensional electrode material for high-performance supercapacitors. NANOSCALE ADVANCES 2023; 5:3146-3176. [PMID: 37325524 PMCID: PMC10263109 DOI: 10.1039/d3na00094j] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/12/2023] [Accepted: 04/30/2023] [Indexed: 06/17/2023]
Abstract
Supercapacitors have gained significant attention owing to their exceptional performance in terms of energy density and power density, making them suitable for various applications, such as mobile devices, electric vehicles, and renewable energy storage systems. This review focuses on recent advancements in the utilization of 0-dimensional to 3-dimensional carbon network materials as electrode materials for high-performance supercapacitor devices. This study aims to provide a comprehensive evaluation of the potential of carbon-based materials in enhancing the electrochemical performance of supercapacitors. The combination of these materials with other cutting-edge materials, such as Transition Metal Dichalcogenides (TMDs), MXenes, Layered Double Hydroxides (LDHs), graphitic carbon nitride (g-C3N4), Metal-Organic Frameworks (MOFs), Black Phosphorus (BP), and perovskite nanoarchitectures, has been extensively studied to achieve a wide operating potential window. The combination of these materials synchronizes their different charge-storage mechanisms to attain practical and realistic applications. The findings of this review indicate that hybrid composite electrodes with 3D structures exhibit the best potential in terms of overall electrochemical performance. However, this field faces several challenges and promising research directions. This study aimed to highlight these challenges and provide insights into the potential of carbon-based materials in supercapacitor applications.
Collapse
Affiliation(s)
- Niraj Kumar
- Sustainable Energy Laboratory, Department of Metallurgical and Materials Engineering, Defence Institute of Advanced Technology (DIAT) Pune Maharashtra 411025 India
| | - Sudip Ghosh
- Department of Chemistry, Siksha 'O' Anusandhan, Deemed to be University Bhubaneswar Odisha India
| | - Dinbandhu Thakur
- Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay Mumbai-400076 India
| | - Chuan-Pei Lee
- Department of Applied Physics and Chemistry, University of Taipei Taipei 10048 Taiwan
| | - Prasanta Kumar Sahoo
- Department of Mechanical Engineering, Siksha 'O' Anusandhan Deemed to Be University Bhubaneswar 751030 India
| |
Collapse
|
13
|
Weng M, Zhou J, Ye Y, Qiu H, Zhou P, Luo Z, Guo Q. Self-chargeable supercapacitor made with MXene-bacterial cellulose nanofiber composite for wearable devices. J Colloid Interface Sci 2023; 647:277-286. [PMID: 37262990 DOI: 10.1016/j.jcis.2023.05.162] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/15/2023] [Revised: 05/15/2023] [Accepted: 05/26/2023] [Indexed: 06/03/2023]
Abstract
The development of wearable electronics is restricted by the developments of supporting energy storage devices, especially flexible supercapacitors. Nowadays, miniaturized supercapacitors based on MXenes due to their obvious advantages in the specific capacity have received extensive attention. The energy existing in the surrounding environment has been used to directly charge energy storage devices. However, the hybrid wearable electronics integrated supercapacitors are mechanically connected through metal wires leading to non-compact devices. Thus, it is urgent to develop a general and universal method to fabricate high-performance robust MXene-based flexible electrodes with high electrical conductivity and apply them to self-chargeable supercapacitors and compact wearable devices. Herein, the bacterial cellulose (BC) nanofibers are used as a crosslinking agent to connect two-dimensional MXene nanosheets through the hydrogen bond, which greatly improves the mechanical strength of MXene-bacterial cellulose (MXene-BC) composite films (Young's modulus reaching 6.8 GPa). The supercapacitors made with the electrodes of MXene-BC composite films (BC content is 10%) present high capacitance behavior (areal capacitance up to 346 mF cm-2) because the introduction of BC nanofibers increases the interlayer spacing of MXene nanosheets, providing more storage space for the ions in the electrolyte. Then, a self-chargeable supercapacitor is proposed based on the combination of a zinc-air (Zn-air) battery and a supercapacitor. The self-chargeable supercapacitor can realize self-charging after dropping a drop of electrolyte solution into the Zn-air battery. The charging voltage of a single self-chargeable supercapacitor can reach 0.6 V after adding artificial sweat as the electrolyte. Finally, a smart wristband with the function of self-charging is proposed, which can absorb the sweat generated by the human for self-chargeable supercapacitors to drive the pedometer integrated within the smart wristband to work. The proposed self-chargeable supercapacitors are simple and effective, not restricted by the use environment, providing a promising way for self-powered wearable electronics.
Collapse
Affiliation(s)
- Mingcen Weng
- School of Materials Science and Engineering, Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Key Laboratory of Polymer Materials and Products of Universities in Fujian, Fujian University of Technology, Fuzhou, Fujian 350118, China.
| | - Jiahao Zhou
- School of Materials Science and Engineering, Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Key Laboratory of Polymer Materials and Products of Universities in Fujian, Fujian University of Technology, Fuzhou, Fujian 350118, China
| | - Yuanji Ye
- School of Materials Science and Engineering, Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Key Laboratory of Polymer Materials and Products of Universities in Fujian, Fujian University of Technology, Fuzhou, Fujian 350118, China
| | - Huofeng Qiu
- School of Materials Science and Engineering, Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Key Laboratory of Polymer Materials and Products of Universities in Fujian, Fujian University of Technology, Fuzhou, Fujian 350118, China
| | - Peidi Zhou
- Institute of Smart Marine and Engineering, Fujian University of Technology, Fuzhou, Fujian 350118, China.
| | - Zhiling Luo
- Fujian Provincial Key Laboratory of Quantum Manipulation and New Energy Materials, College of Physics and Energy, Fujian Normal University, Fuzhou 350117, China.
| | - Qiaohang Guo
- School of Materials Science and Engineering, Fujian Provincial Key Laboratory of Advanced Materials Processing and Application, Key Laboratory of Polymer Materials and Products of Universities in Fujian, Fujian University of Technology, Fuzhou, Fujian 350118, China
| |
Collapse
|
14
|
Shaheen I, Hussain I, Zahra T, Memon R, Alothman AA, Ouladsmane M, Qureshi A, Niazi JH. Electrophoretic Fabrication of ZnO/CuO and ZnO/CuO/rGO Heterostructures-based Thin Films as Environmental Benign Flexible Electrode for Supercapacitor. CHEMOSPHERE 2023; 322:138149. [PMID: 36804630 DOI: 10.1016/j.chemosphere.2023.138149] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/19/2022] [Revised: 01/12/2023] [Accepted: 02/12/2023] [Indexed: 06/18/2023]
Abstract
Sustainable fabrication of flexible hybrid supercapacitor electrodes is extensively investigated during the current era to solve global energy problems. Herein, we used a cost-effective and efficient electrophoretic deposition (EPD) approach to fabricate a hybrid supercapacitor electrode. ZnO/CuO and ZnO/CuO/rGO heterostructure were prepared by sol-gel synthesis route and were electrophoretically deposited on indium tin oxide (ITO) substrate as a thin uniform layer using 1 V for 20 min at 50 mV/s. ZnO/CuO and ZnO/CuO/rGO heterostructure coated ITOs were then employed as the working electrode in a three-electrode setup for supercapacitor measurements. The fabricated electrodes have been investigated by Galvanostatic charge-discharge (GCD), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) to study their charge storage properties. ZnO/CuO revealed a specific capacitance of 1945 F g-1 at 2 mV/s and 999 F g-1 at 5 A g-1. However, an increased specific capacitance of 2305 F g-1 was measured for ZnO/CuO/rGO heterostructure at 2 mV/s and 1235 F g-1 at 5 A g-1. The lower internal resistance was observed for ZnO/CuO/rGO heterostructure, indicating good conductivity of the electrode material. Thus, the overall results of the current study suggest that EPD-assisted ZnO/CuO/rGO heterostructure hybrid electrode possess a substantial potential for energy storage as a supercapacitor.
Collapse
Affiliation(s)
- Irum Shaheen
- Sabanci University, SUNUM Nanotechnology Research and Application Center, Tuzla, 34956, Istanbul, Turkey.
| | - Iftikhar Hussain
- Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong; School of Chemical Engineering, Yeungnam University, Gyeongsan, Gyeongbuk, 38541, Republic of Korea
| | - Taghazal Zahra
- Sabanci University, SUNUM Nanotechnology Research and Application Center, Tuzla, 34956, Istanbul, Turkey
| | - Roomia Memon
- Sabanci University, SUNUM Nanotechnology Research and Application Center, Tuzla, 34956, Istanbul, Turkey
| | - Asma A Alothman
- Department of Chemistry, College of Science, King Saud University, Riyadh, 11451, Saudi Arabia
| | - Mohamed Ouladsmane
- Department of Chemistry, College of Science, King Saud University, Riyadh, 11451, Saudi Arabia
| | - Anjum Qureshi
- Sabanci University, SUNUM Nanotechnology Research and Application Center, Tuzla, 34956, Istanbul, Turkey.
| | - Javed H Niazi
- Sabanci University, SUNUM Nanotechnology Research and Application Center, Tuzla, 34956, Istanbul, Turkey.
| |
Collapse
|
15
|
Lee S, Choi HW, Figueiredo CL, Shin DW, Moncunill FM, Ullrich K, Sinopoli S, Jovančić P, Yang J, Lee H, Eisenreich M, Emanuele U, Nicotera S, Santos A, Igreja R, Marrani A, Momentè R, Gomes J, Jung SM, Han SD, Bang SY, Zhan S, Harden-Chaters W, Suh YH, Fan XB, Lee TH, Jo JW, Kim Y, Costantino A, Candel VG, Durães N, Meyer S, Kim CH, Lucassen M, Nejim A, Jiménez D, Springer M, Lee YW, An GH, Choi Y, Sohn JI, Cha S, Chhowalla M, Amaratunga GA, Occhipinti LG, Barquinha P, Fortunato E, Martins R, Kim JM. Truly form-factor-free industrially scalable system integration for electronic textile architectures with multifunctional fiber devices. SCIENCE ADVANCES 2023; 9:eadf4049. [PMID: 37083532 PMCID: PMC10121163 DOI: 10.1126/sciadv.adf4049] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Grants] [Figures] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
An integrated textile electronic system is reported here, enabling a truly free form factor system via textile manufacturing integration of fiber-based electronic components. Intelligent and smart systems require freedom of form factor, unrestricted design, and unlimited scale. Initial attempts to develop conductive fibers and textile electronics failed to achieve reliable integration and performance required for industrial-scale manufacturing of technical textiles by standard weaving technologies. Here, we present a textile electronic system with functional one-dimensional devices, including fiber photodetectors (as an input device), fiber supercapacitors (as an energy storage device), fiber field-effect transistors (as an electronic driving device), and fiber quantum dot light-emitting diodes (as an output device). As a proof of concept applicable to smart homes, a textile electronic system composed of multiple functional fiber components is demonstrated, enabling luminance modulation and letter indication depending on sunlight intensity.
Collapse
Affiliation(s)
- Sanghyo Lee
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
- Department of Engineering Science, University of Oxford, Oxford, UK
| | - Hyung Woo Choi
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Cátia Lopes Figueiredo
- i3N/CENIMAT and CEMOP/UNINOVA, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica 2829-516, Portugal
| | - Dong-Wook Shin
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
- Department of Materials Science and Engineering, Hanbat National University, Daejeon, South Korea
| | | | - Kay Ullrich
- Textile Research Institute Thuringia-Vogtland (TITV), Greiz, Germany
| | - Stefano Sinopoli
- Bioelectronics and Advanced Genomic Engineering (BIOAGE), Lamezia Terme, Italy
| | - Petar Jovančić
- Advanced Material Research, Functional Textile Unit, EURECAT, Barcelona, Spain
| | - Jiajie Yang
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Hanleem Lee
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
- Department of Chemistry, Myongji University, 116 Myongji Ro, Yongin, Gyeonggi-do 17058, South Korea
| | - Martin Eisenreich
- Textile Research Institute Thuringia-Vogtland (TITV), Greiz, Germany
| | - Umberto Emanuele
- Bioelectronics and Advanced Genomic Engineering (BIOAGE), Lamezia Terme, Italy
| | - Salvatore Nicotera
- Bioelectronics and Advanced Genomic Engineering (BIOAGE), Lamezia Terme, Italy
| | - Angelo Santos
- i3N/CENIMAT and CEMOP/UNINOVA, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica 2829-516, Portugal
| | - Rui Igreja
- i3N/CENIMAT and CEMOP/UNINOVA, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica 2829-516, Portugal
| | | | | | - João Gomes
- Centre for Nanotechnology and Smart Materials (CeNTI), Vila Nova de Famalicão, Portugal
| | - Sung-Min Jung
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Soo Deok Han
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Sang Yun Bang
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Shijie Zhan
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - William Harden-Chaters
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Yo-Han Suh
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Xiang-Bing Fan
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Tae Hoon Lee
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
- School of Materials Science and Engineering, Kyungpook National University, Daegu 41566, South Korea
| | - Jeong-Wan Jo
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Yoonwoo Kim
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Antonino Costantino
- Bioelectronics and Advanced Genomic Engineering (BIOAGE), Lamezia Terme, Italy
| | | | - Nelson Durães
- Centre for Nanotechnology and Smart Materials (CeNTI), Vila Nova de Famalicão, Portugal
| | - Sebastian Meyer
- Global Open Innovation Department, LG Display Co. Ltd., Seoul, South Korea
| | - Chul-Hong Kim
- Global Open Innovation Department, LG Display Co. Ltd., Seoul, South Korea
| | | | | | | | | | - Young-Woo Lee
- Department of Engineering Science, University of Oxford, Oxford, UK
- Department of Energy Systems, Soonchunhyang University, Asan, South Korea
| | - Geon-Hyoung An
- Department of Engineering Science, University of Oxford, Oxford, UK
- Department of Energy Engineering, Gyeongsang National University, Jinju, South Korea
| | - Youngjin Choi
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Jung Inn Sohn
- Department of Engineering Science, University of Oxford, Oxford, UK
- Division of Physics and Semiconductor Science, Dongguk University, Seoul, South Korea
| | - SeungNam Cha
- Department of Engineering Science, University of Oxford, Oxford, UK
- Department of Physics, Sungkyunkwan University, Suwon, South Korea
| | - Manish Chhowalla
- Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK
| | - Gehan A. J. Amaratunga
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
| | - Luigi G. Occhipinti
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
- Corresponding author. (L.G.O.); (P.B.); (J.M.K.)
| | - Pedro Barquinha
- i3N/CENIMAT and CEMOP/UNINOVA, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica 2829-516, Portugal
- Corresponding author. (L.G.O.); (P.B.); (J.M.K.)
| | - Elvira Fortunato
- i3N/CENIMAT and CEMOP/UNINOVA, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica 2829-516, Portugal
| | - Rodrigo Martins
- i3N/CENIMAT and CEMOP/UNINOVA, Department of Materials Science, NOVA School of Science and Technology, NOVA University Lisbon, Campus de Caparica, Caparica 2829-516, Portugal
| | - Jong Min Kim
- Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, UK
- Corresponding author. (L.G.O.); (P.B.); (J.M.K.)
| |
Collapse
|
16
|
Sheng Z, Liu Z, Hou Y, Jiang H, Li Y, Li G, Zhang X. The Rising Aerogel Fibers: Status, Challenges, and Opportunities. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2205762. [PMID: 36658735 PMCID: PMC10037991 DOI: 10.1002/advs.202205762] [Citation(s) in RCA: 16] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Revised: 12/14/2022] [Indexed: 06/17/2023]
Abstract
Aerogel fibers garner tremendous scientific interest due to their unique properties such as ultrahigh porosity, large specific surface area, and ultralow thermal conductivity, enabling diverse potential applications in textile, environment, energy conversion and storage, and high-tech areas. Here, the fabrication methodologies to construct the aerogel fibers starting from nanoscale building blocks are overviewed, and the spinning thermodynamics and spinning kinetics associated with each technology are revealed. The huge pool of material choices that can be assembled into aerogel fibers is discussed. Furthermore, the fascinating properties of aerogel fibers, including mechanical, thermal, sorptive, optical, and fire-retardant properties are elaborated on. Next, the nano-confining functionalization strategy for aerogel fibers is particularly highlighted, touching upon the driving force for liquid encapsulation, solid-liquid interface adhesion, and interfacial stability. In addition, emerging applications in thermal management, smart wearable fabrics, water harvest, shielding, heat transfer devices, artificial muscles, and information storage, are discussed. Last, the existing challenges in the development of aerogel fibers are pointed out and light is shed on the opportunities in this burgeoning field.
Collapse
Affiliation(s)
- Zhizhi Sheng
- Suzhou Institute of Nano‐Tech and Nano BionicsChinese Academy of SciencesSuzhou215123China
| | - Zengwei Liu
- Suzhou Institute of Nano‐Tech and Nano BionicsChinese Academy of SciencesSuzhou215123China
| | - Yinglai Hou
- Suzhou Institute of Nano‐Tech and Nano BionicsChinese Academy of SciencesSuzhou215123China
| | - Haotian Jiang
- Suzhou Institute of Nano‐Tech and Nano BionicsChinese Academy of SciencesSuzhou215123China
| | - Yuzhen Li
- Suzhou Institute of Nano‐Tech and Nano BionicsChinese Academy of SciencesSuzhou215123China
| | - Guangyong Li
- Suzhou Institute of Nano‐Tech and Nano BionicsChinese Academy of SciencesSuzhou215123China
| | - Xuetong Zhang
- Suzhou Institute of Nano‐Tech and Nano BionicsChinese Academy of SciencesSuzhou215123China
- Division of Surgery & Interventional ScienceUniversity College LondonLondonNW3 2PFUK
| |
Collapse
|
17
|
Kumar A, Chang DW. Towards the Future of Polymeric Hybrids of Two-Dimensional Black Phosphorus or Phosphorene: From Energy to Biological Applications. Polymers (Basel) 2023; 15:polym15040947. [PMID: 36850230 PMCID: PMC9962990 DOI: 10.3390/polym15040947] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/18/2023] [Revised: 02/06/2023] [Accepted: 02/09/2023] [Indexed: 02/17/2023] Open
Abstract
With the advent of a new 2D nanomaterial, namely, black phosphorus (BP) or phosphorene, the scientific community is now dedicated to focusing on and exploring this 2D material offering elusive properties such as a higher carrier mobility, biocompatibility, thickness-dependent band gap, and optoelectronic characteristics that can be harnessed for multiple applications, e.g., nanofillers, energy storage devices, field effect transistors, in water disinfection, and in biomedical sciences. The hexagonal ring of phosphorus atoms in phosphorene is twisted slightly, unlike how it is in graphene. Its unique characteristics, such as a high carrier mobility, anisotropic nature, and biocompatibility, have attracted much attention and generated further scientific curiosity. However, despite these interesting features, the phosphorene or BP poses challenges and causes frustrations when it comes to its stability under ambient conditions and processability, and thus in order to overcome these hurdles, it must be conjugated or linked with the suitable and functional organic counter macromolecule in such a way that its properties are not compromised while providing a protection from air/water that can otherwise degrade it to oxides and acid. The resulting composites/hybrid system of phosphorene and a macromolecule, e.g., a polymer, can outperform and be exploited for the aforementioned applications. These assemblies of a polymer and phosphorene have the potential for shifting the paradigm from exhaustively used graphene to new commercialized products offering multiple applications.
Collapse
|
18
|
Lao N, Barron N. Enhancing recombinant protein and viral vector production in mammalian cells by targeting the YTHDF readers of N 6 -methyladenosine in mRNA. Biotechnol J 2023; 18:e2200451. [PMID: 36692010 DOI: 10.1002/biot.202200451] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2022] [Revised: 12/20/2022] [Accepted: 01/19/2023] [Indexed: 01/25/2023]
Abstract
N6 -methyladenosine (m6A) is the most abundant internal modification on eukaryotic mRNA and has been implicated in a wide range of fundamental cellular processes. This modification is regulated and interpreted by a set of writer, eraser, and reader proteins. To date, there have been no reports on the potential of mRNA epigenetic regulators to influence recombinant protein expression in mammalian cells. In this study, the potential of manipulating the expression of the m6A YTH domain-containing readers, YTHDF1, 2 and 3 to improve recombinant protein yield based on their role in regulating mRNA stability and promoting translation were evaluated. Using siRNA-mediated gene depletion, cDNA over-expression, and methylation-specific RNA immunoprecipitation, it is demonstrated that (i) knock-down of YTHDF2 enhances (~2-fold) the levels of recombinant protein derived from GFP and EPO transgenes in CHO cells; (ii) the effects of YTHDF2 depletion on transgene expression is m6A-mediated; and (iii) YTHDF2 depletion, or over-expression of YTHDF1 increases viral protein expression and yield of infectious lentiviral (LV) particles (~2-3-fold) in HEK293 cells. We conclude that various transgenes can be subjected to regulation by m6A regulators in mammalian cell lines and that these findings demonstrate the utility of epitranscriptomic-based approaches to host cell line engineering for improved recombinant protein and viral vector production.
Collapse
Affiliation(s)
- Nga Lao
- National Institute for Bioprocessing Research and Training, Dublin, Ireland
| | - Niall Barron
- National Institute for Bioprocessing Research and Training, Dublin, Ireland.,School of Chemical and Bioprocess Engineering, University College Dublin, Dublin, Ireland
| |
Collapse
|
19
|
Xin X, Xu Y, Wuliji H, Sun F, Liu Q, Wang Z, Wei TR, Zhao X, Song X, Gao L. Covalently Assembled Black Phosphorus/Conductive C 3N 4 Hybrid Material for Flexible Supercapacitors Exhibiting a Superlong 30,000 Cycle Durability. ACS NANO 2023; 17:657-667. [PMID: 36542067 DOI: 10.1021/acsnano.2c09970] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Black phosphorus (BP) has been demonstrated as a promising electrode material for supercapacitors. Currently, the main limitation of its practical application is the low electrical conductivity and poor structure stability. Hence, BP-based supercapacitors usually severely suffer from low capacitance and poor cycling stability. Herein, a chemically bridged BP/conductive g-C3N4 (BP/c-C3N4) hybrid is developed via a facile ball-milling method. Covalent P-C bonds are generated through the ball-milling process, effectively preventing the structural distortion of BP induced by ion transport and diffusion. In addition, the overall electrical conductivity is significantly enhanced owing to the sufficient coupling between BP and highly conductive c-C3N4. Moreover, the imbalanced charge distribution around the C atom can induce the generation of a local electric field, facilitating the charge transfer behavior of the electrode material. As a result, the BP/c-C3N4-20:1 flexible supercapacitor (FSC) exhibits an outstanding volumetric capacitance of 42.1 F/cm3 at 0.005 V/s, a high energy density of 5.85 mW h/cm3, and a maximum power density of 15.4 W/cm3. More importantly, the device delivers excellent cycling stability with no capacitive loss after 30,000 cycles.
Collapse
Affiliation(s)
- Xipeng Xin
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Yifeng Xu
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Hexige Wuliji
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Fei Sun
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Qingdong Liu
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Zezhen Wang
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Tian-Ran Wei
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Xiaofeng Zhao
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| | - Xuefeng Song
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
- Shenzhen Research Institute, Shanghai Jiao Tong University, Shenzhen518057, China
| | - Lian Gao
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai200240, China
| |
Collapse
|
20
|
Abrishamkar A, Nilghaz A, Saadatmand M, Naeimirad M, deMello AJ. Microfluidic-assisted fiber production: Potentials, limitations, and prospects. BIOMICROFLUIDICS 2022; 16:061504. [PMID: 36406340 PMCID: PMC9674390 DOI: 10.1063/5.0129108] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/03/2022] [Revised: 11/21/2022] [Accepted: 11/02/2022] [Indexed: 05/24/2023]
Abstract
Besides the conventional fiber production methods, microfluidics has emerged as a promising approach for the engineered spinning of fibrous materials and offers excellent potential for fiber manufacturing in a controlled and straightforward manner. This method facilitates low-speed prototype synthesis of fibers for diverse applications while providing superior control over reaction conditions, efficient use of precursor solutions, reagent mixing, and process parameters. This article reviews recent advances in microfluidic technology for the fabrication of fibrous materials with different morphologies and a variety of properties aimed at various applications. First, the basic principles, as well as the latest developments and achievements of microfluidic-based techniques for fiber production, are introduced. Specifically, microfluidic platforms made of glass, polymers, and/or metals, including but not limited to microfluidic chips, capillary-based devices, and three-dimensional printed devices are summarized. Then, fiber production from various materials, such as alginate, gelatin, silk, collagen, and chitosan, using different microfluidic platforms with a broad range of cross-linking agents and mechanisms is described. Therefore, microfluidic spun fibers with diverse diameters ranging from submicrometer scales to hundreds of micrometers and structures, such as cylindrical, hollow, grooved, flat, core-shell, heterogeneous, helical, and peapod-like morphologies, with tunable sizes and mechanical properties are discussed in detail. Subsequently, the practical applications of microfluidic spun fibers are highlighted in sensors for biomedical or optical purposes, scaffolds for culture or encapsulation of cells in tissue engineering, and drug delivery. Finally, different limitations and challenges of the current microfluidic technologies, as well as the future perspectives and concluding remarks, are presented.
Collapse
Affiliation(s)
| | - Azadeh Nilghaz
- Institute for Frontier Materials, Deakin University, Waurn Ponds, Victoria 3216, Australia
| | - Maryam Saadatmand
- Department of Chemical and Petroleum Engineering, Sharif University of Technology, 11155-9465 Tehran, Iran
| | - Mohammadreza Naeimirad
- Department of Materials and Textile Engineering, Faculty of Engineering, Razi University, 67144-14971 Kermanshah, Iran
| | - Andrew J. deMello
- Department of Chemistry and Applied Biosciences, Institute for Chemical and Bioengineering, ETH Zurich, Vladimir-Prelog-Weg1, 8049 Zurich, Switzerland
| |
Collapse
|
21
|
Hydrothermal synthesis of nickel foam-supported spinel ZnNi2O4 nanostructure as electrode materials for supercapacitors. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.141314] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
22
|
Li Z, Song J, Yang H. Emerging low-dimensional black phosphorus: from physical-optical properties to biomedical applications. Sci China Chem 2022. [DOI: 10.1007/s11426-022-1355-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
23
|
Review on the Energy Transformation Application of Black Phosphorus and Its Composites. Catalysts 2022. [DOI: 10.3390/catal12111403] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
Black phosphorus (BP) is a unique two-dimensional material with excellent conductivity, and a widely tunable bandgap. In recent years, its application in the field of energy has attracted extensive attention, in terms of energy storage, due to its high theoretical specific capacity and excellent conductivity, black phosphorus is widely used as electrode material in battery and supercapacitors, while for energy generating, it has been also used as photocatalyst and electrocatalysts to split water and produce hydrogen. Black phosphorus demonstrates even better stability and catalytic performance through further construction, doping, or heterojunction. This review briefly summarizes the latest research progress of black phosphorus and its composites in energy preparation and storage, as well as ammonia nitrogen fixation, and also looks into the possible development directions in the future.
Collapse
|
24
|
Yuan B, Zhou X, Li Y, Zhao Y, Xue M, Guo Q, Zheng G, Chen X, Lin H, Guo X. Black-Phosphorus-Nanosheet-Reinforced Coating of Implants for Sequential Biofilm Ablation and Bone Fracture Healing Acceleration. ACS APPLIED MATERIALS & INTERFACES 2022; 14:47036-47051. [PMID: 36203356 DOI: 10.1021/acsami.2c13566] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Incurable implant-related infection may cause catastrophic consequences due to the existence of a biofilm that resists the infiltration of host immune cells and antibiotics. Innovative approaches inspired by nanomedicine, e.g., engineering innovative multifunctional bionic coating systems on the surface of implants, are becoming increasingly attractive. Herein, 2D black phosphorus nanosheets (BPs) were loaded onto a hydroxyapatite (HA)-coated metal implant to construct a BPs@HA composite coating. With its photothermal conversion effect and in situ biomineralization, the BPs@HA coating shows excellent performances in ablating the bacterial biofilm and accelerating fracture healing, which were verified through both in vitro and in vivo studies. Moreover, differentially expressed genes of bone formation and bone mesenchymal stem cells (BMSCs) regulated by the BPs@HA coating were identified using absolute quantitative transcriptome sequencing followed by the screening of gene differential expressions. A functional enrichment analysis reveals that the expression of core markers related to BMSC differentiation and bone formation could be effectively regulated by BPs through a metabolism-related pathway. This work not only illustrates the great potential in clinical application of the BPs@HA composite coating to eliminate bacteria and accelerate bone fracture healing but also contributes to an understanding of the underlying molecular mechanism of osteogenesis physiological function regulation based on an analysis of absolute quantitative transcriptome sequencing.
Collapse
Affiliation(s)
- Bo Yuan
- Department of Orthopaedics, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| | - Xin Zhou
- Department of Orthopaedics, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| | - Yingke Li
- Department of Anesthesiology, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| | - Yin Zhao
- Department of Orthopaedics, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| | - Mintao Xue
- Department of Orthopaedics, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| | - Qunfeng Guo
- Department of Orthopaedics, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| | - Gang Zheng
- Department of Orthopaedics, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| | - Xiongsheng Chen
- Department of Orthopaedics, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| | - Han Lin
- State Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai200050, People's Republic of China
| | - Xiang Guo
- Department of Orthopaedics, Shanghai Changzheng Hospital, Second Affiliated Hospital of Naval Medical University, Shanghai200003, People's Republic of China
| |
Collapse
|
25
|
Wu G, Wu X, Zhu X, Xu J, Bao N. Two-Dimensional Hybrid Nanosheet-Based Supercapacitors: From Building Block Architecture, Fiber Assembly, and Fabric Construction to Wearable Applications. ACS NANO 2022; 16:10130-10155. [PMID: 35839097 DOI: 10.1021/acsnano.2c02841] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Fiber-based supercapacitors (F-SCs) have inspired widespread interest in the fields of wearable technology, energy, and carbon neutralization due to their highly deformable flexibility, fast charging/discharging capability, long-term stability, and energy conservation ability. In this review, we summarize the latest developments for fabricating fibrous electrodes of F-SCs where advanced micro two-dimensional (2D) building blocks (e.g., MXene and graphene) are chemically assembled and constructed into ordered mesofibers and multifunctional macrofabrics. Diverse fundamental principles of 2D hybrid nanosheets with respect to surface controls, pseudocapacitive modifications, and microstructural manipulations, promoting rapid electron transfer and charge conduction, are introduced. Additionally, various spinning methods for assembling and fabricating sophisticated fibers with advanced nano/microstructures, including hierarchical skeletons, anisotropic backbones, surface/entire porous frameworks, and vertical-aligned networks, for boosting ionic kinetic transport/storage are presented. Likewise, the structure-activity relationships between the porous structure and electrochemical performance are clarified. Moreover, multifunctional fabrics in terms of high flexibilities/strengths, superior electrical conductivities, and stabilized operations, which realize large energy density, deformable capability, and robust stability under harsh conditions, are emphasized. In particular, the potential power-supply applications, including flexible electronic devices, self-powered functions, and energy-sensor systems, are highlighted. Finally, a short conclusion and outlook, along with the current challenges and future opportunities of next-generation F-SCs, are proposed.
Collapse
Affiliation(s)
- Guan Wu
- National Engineering Lab for Textile Fiber Materials and Processing Technology, School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, PR China
- Zhejiang Provincial Innovation Center of Advanced Textile Technology, Shaoxing 312000, PR China
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 210009, PR China
| | - Xingjiang Wu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, PR China
| | - XiaoLin Zhu
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 210009, PR China
| | - Jianhong Xu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, PR China
| | - Ningzhong Bao
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 210009, PR China
| |
Collapse
|
26
|
Xie X, Wang Y, Siu SY, Chan CW, Zhu Y, Zhang X, Ge J, Ren K. Microfluidic synthesis as a new route to produce novel functional materials. BIOMICROFLUIDICS 2022; 16:041301. [PMID: 36035887 PMCID: PMC9410731 DOI: 10.1063/5.0100206] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2022] [Accepted: 07/28/2022] [Indexed: 06/15/2023]
Abstract
By geometrically constraining fluids into the sub-millimeter scale, microfluidics offers a physical environment largely different from the macroscopic world, as a result of the significantly enhanced surface effects. This environment is characterized by laminar flow and inertial particle behavior, short diffusion distance, and largely enhanced heat exchange. The recent two decades have witnessed the rapid advances of microfluidic technologies in various fields such as biotechnology; analytical science; and diagnostics; as well as physical, chemical, and biological research. On the other hand, one additional field is still emerging. With the advances in nanomaterial and soft matter research, there have been some reports of the advantages discovered during attempts to synthesize these materials on microfluidic chips. As the formation of nanomaterials and soft matters is sensitive to the environment where the building blocks are fed, the unique physical environment of microfluidics and the effectiveness in coupling with other force fields open up a lot of possibilities to form new products as compared to conventional bulk synthesis. This Perspective summarizes the recent progress in producing novel functional materials using microfluidics, such as generating particles with narrow and controlled size distribution, structured hybrid materials, and particles with new structures, completing reactions with a quicker rate and new reaction routes and enabling more effective and efficient control on reactions. Finally, the trend of future development in this field is also discussed.
Collapse
Affiliation(s)
- Xinying Xie
- Department of Chemistry, Hong Kong Baptist University, Hong Kong 999077, China
| | - Yisu Wang
- Department of Chemistry, Hong Kong Baptist University, Hong Kong 999077, China
| | - Sin-Yung Siu
- Department of Chemistry, Hong Kong Baptist University, Hong Kong 999077, China
| | - Chiu-Wing Chan
- Department of Chemistry, Hong Kong Baptist University, Hong Kong 999077, China
| | | | - Xuming Zhang
- Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong 999077, China
| | | | - Kangning Ren
- Author to whom correspondence should be addressed: and
| |
Collapse
|
27
|
Guan T, Cheng Z, Li Z, Gao L, Yan K, Shen L, Bao N. Hydrothermal-Assisted In Situ Growth of Vertically Aligned MoS 2 Nanosheets on Reduced Graphene Oxide Fiber Fabrics toward High-Performance Flexible Supercapacitors. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.2c00067] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Tuxiang Guan
- College of Chemical Engineering, State Key Laboratory of Material-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu 210009, P. R. China
| | - Zhisheng Cheng
- College of Chemical Engineering, State Key Laboratory of Material-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu 210009, P. R. China
| | - Zemei Li
- College of Chemical Engineering, State Key Laboratory of Material-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu 210009, P. R. China
| | - Lin Gao
- College of Chemical Engineering, State Key Laboratory of Material-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu 210009, P. R. China
| | - Kelan Yan
- College of Chemical Engineering, State Key Laboratory of Material-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu 210009, P. R. China
| | - Liming Shen
- College of Chemical Engineering, State Key Laboratory of Material-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu 210009, P. R. China
| | - Ningzhong Bao
- College of Chemical Engineering, State Key Laboratory of Material-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu 210009, P. R. China
| |
Collapse
|
28
|
Li X, Yue W, Li W, Zhao J, Zhang Y, Gao Y, Gao N, Feng D, Wu B, Wang B. Rational design of 3D net-like carbon based Mn 3O 4 anode materials with enhanced lithium storage performance. NEW J CHEM 2022. [DOI: 10.1039/d2nj01618d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A three-dimensional net-like Mn3O4/carbon paper composite was realized, which delivers a remarkably enhanced rate performance and excellent cycling stability for lithium-ion storage.
Collapse
Affiliation(s)
- Xue Li
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
| | - Wence Yue
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
| | - Wenbiao Li
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
| | - Jie Zhao
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
| | - Yujiao Zhang
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
| | - Yibo Gao
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
| | - Ning Gao
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
| | - Dan Feng
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
| | - Bin Wu
- Young Investigator Group Nanoscale Solid-Liquid Interfaces, Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Albert-Einstein-Straße 15, 12489 Berlin, Germany
- Institute of Physics, Humboldt University Berlin, Newton-Straße 15, 12489 Berlin, Germany
| | - Bao Wang
- State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Science, Beijing, 100190, P. R. China
- College of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing, 100000, P. R. China
| |
Collapse
|
29
|
High Sensitivity of Ammonia Sensor through 2D Black Phosphorus/Polyaniline Nanocomposite. NANOMATERIALS 2021; 11:nano11113026. [PMID: 34835789 PMCID: PMC8622802 DOI: 10.3390/nano11113026] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/13/2021] [Revised: 11/01/2021] [Accepted: 11/06/2021] [Indexed: 11/16/2022]
Abstract
Recently, as a two-dimensional (2D) material, black phosphorous (BP) has attracted more and more attention. However, few efforts have been made to investigate the BP/polyaniline (PANI) nanocomposite for ammonia (NH3) gas sensors. In this work, the BP/PANI nanocomposite as a novel sensing material for NH3 detection, has been synthesized via in situ chemical oxidative polymerization, which is then fabricated onto the interdigitated transducer (IDTs). The electrical properties of the BP/PANI thin film are studied in a large detection range from 1 to 4000 ppm, such as conduction mechanism, response, reproducibility, and selectivity. The experimental result indicates that the BP/PANI sensor shows higher sensitivity and larger detection range than that of PANI. The BP added into PANI, that may enlarge the specific surface area, obtain the special trough structure for gas channels, and form the p-π conjugation system and p-p isotype heterojunctions, which are beneficial to increase the response of BP/PANI to NH3 sensing. Meanwhile, in order to support the discussion result, the structure and morphology of the BP/PANI are respectively measured by Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and field emissions scanning electron microscopy (SEM). Moreover, the sensor shows good reproducibility, and fast response and recovery behavior, on NH3 sensing. In addition, this route may offer the advantages of an NH3 sensor, which are of simple structure, low cost, easy to assemble, and operate at room temperature.
Collapse
|
30
|
Wei L, Deng N, Wang X, Zhao H, Yan J, Yang Q, Kang W, Cheng B. Flexible ordered MnS@CNC/carbon nanofibers membrane based on microfluidic spinning technique as interlayer for stable lithium-metal battery. J Memb Sci 2021. [DOI: 10.1016/j.memsci.2021.119615] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
31
|
Liu H, Ye H, Gao M, Li Q, Liu Z, Xie A, Zhu L, Ho GW, Chen S. Conformal Microfluidic-Blow-Spun 3D Photothermal Catalytic Spherical Evaporator for Omnidirectional Enhanced Solar Steam Generation and CO 2 Reduction. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:e2101232. [PMID: 34363347 PMCID: PMC8498876 DOI: 10.1002/advs.202101232] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/26/2021] [Revised: 05/28/2021] [Indexed: 05/19/2023]
Abstract
Solar-driven water evaporation and valuable fuel generation is an environmentally friendly and sustainable way for clean water and energy production. However, a few bottlenecks for practical applications are high-cost, low productivity, and severe sunlight angle dependence. Herein, solar evaporation with enhanced photocatalytic capacity that is light direction insensitive and of efficiency breakthrough by virtue of a three-dimensional (3D) photothermal catalytic spherical isotopic evaporator is demonstrated. A homogeneous layer of microfluidic blow spun polyamide nanofibers loaded with efficient light absorber of polypyrrole nanoparticles conformally wraps onto a lightweight, thermal insulating plastic sphere, featuring favorable interfacial solar heating and efficient water transportation. The 3D spherical geometry not only guarantees the omnidirectional solar absorbance by the light-facing hemisphere, but also keeps the other hemisphere under shadow to harvest energy from the warmer environment. As a result, the light-to-vapor efficiency exceeds the theoretical limit, reaching 217% and 156% under 1 and 2 sun, respectively. Simultaneously, CO2 photoreduction with generated steam reveals a favorable clean fuels production rate using photocatalytic spherical evaporator by secondary growth of Cu2 O nanoparticles. Finally, an outdoor demonstration manifests a high evaporation rate and easy-to-perform construction on-site, providing a promising opportunity for efficient and decentralized water and clean fuel production.
Collapse
Affiliation(s)
- Hao Liu
- State Key Laboratory of Materials‐Oriented Chemical EngineeringCollege of Chemical EngineeringJiangsu Key Laboratory of Fine Chemicals and Functional Polymer MaterialsNanjing Tech University5 Xin Mofan RoadNanjing210009P. R. China
| | - Hong‐Gang Ye
- State Key Laboratory of Materials‐Oriented Chemical EngineeringCollege of Chemical EngineeringJiangsu Key Laboratory of Fine Chemicals and Functional Polymer MaterialsNanjing Tech University5 Xin Mofan RoadNanjing210009P. R. China
| | - Minmin Gao
- Department of Electrical and Computer EngineeringNational University of Singapore4 Engineering Drive 3Singapore117583Singapore
| | - Qing Li
- State Key Laboratory of Materials‐Oriented Chemical EngineeringCollege of Chemical EngineeringJiangsu Key Laboratory of Fine Chemicals and Functional Polymer MaterialsNanjing Tech University5 Xin Mofan RoadNanjing210009P. R. China
| | - Zhiwu Liu
- State Key Laboratory of Materials‐Oriented Chemical EngineeringCollege of Chemical EngineeringJiangsu Key Laboratory of Fine Chemicals and Functional Polymer MaterialsNanjing Tech University5 Xin Mofan RoadNanjing210009P. R. China
| | - An‐Quan Xie
- State Key Laboratory of Materials‐Oriented Chemical EngineeringCollege of Chemical EngineeringJiangsu Key Laboratory of Fine Chemicals and Functional Polymer MaterialsNanjing Tech University5 Xin Mofan RoadNanjing210009P. R. China
| | - Liangliang Zhu
- State Key Laboratory of Materials‐Oriented Chemical EngineeringCollege of Chemical EngineeringJiangsu Key Laboratory of Fine Chemicals and Functional Polymer MaterialsNanjing Tech University5 Xin Mofan RoadNanjing210009P. R. China
- CAS Key Laboratory of Carbon MaterialsInstitute of Coal ChemistryChinese Academy of SciencesTaiyuan030001China
| | - Ghim Wei Ho
- Department of Electrical and Computer EngineeringNational University of Singapore4 Engineering Drive 3Singapore117583Singapore
| | - Su Chen
- State Key Laboratory of Materials‐Oriented Chemical EngineeringCollege of Chemical EngineeringJiangsu Key Laboratory of Fine Chemicals and Functional Polymer MaterialsNanjing Tech University5 Xin Mofan RoadNanjing210009P. R. China
| |
Collapse
|
32
|
P- N heterojunction NiO/ZnO electrode with high electrochemical performance for supercapacitor applications. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2021.138976] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
33
|
Wu X, Zhu X, Tao H, Wu G, Xu J, Bao N. Covalently Aligned Molybdenum Disulfide–Carbon Nanotubes Heteroarchitecture for High‐Performance Electrochemical Capacitors. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202107734] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Xingjiang Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering Nanjing Tech University Nanjing 210009 P. R. China
- The State Key Laboratory of Chemical Engineering Department of Chemical Engineering Tsinghua University Beijing 100084 P. R. China
| | - Xiaolin Zhu
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering Nanjing Tech University Nanjing 210009 P. R. China
| | - Houyu Tao
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering Nanjing Tech University Nanjing 210009 P. R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering Nanjing Tech University Nanjing 210009 P. R. China
| | - Jianhong Xu
- The State Key Laboratory of Chemical Engineering Department of Chemical Engineering Tsinghua University Beijing 100084 P. R. China
| | - Ningzhong Bao
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering Nanjing Tech University Nanjing 210009 P. R. China
| |
Collapse
|
34
|
Hu Y, Ji Q, Huang M, Chang L, Zhang C, Wu G, Zi B, Bao N, Chen W, Wu Y. Light‐Driven Self‐Oscillating Actuators with Phototactic Locomotion Based on Black Phosphorus Heterostructure. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202108058] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Ying Hu
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment Institute of Industry & Equipment Technology School of Materials Science and Engineering Hefei University of Technology Hefei 230009 P. R. China
| | - Qixiao Ji
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment Institute of Industry & Equipment Technology School of Materials Science and Engineering Hefei University of Technology Hefei 230009 P. R. China
| | - Majing Huang
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment Institute of Industry & Equipment Technology School of Materials Science and Engineering Hefei University of Technology Hefei 230009 P. R. China
| | - Longfei Chang
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment Institute of Industry & Equipment Technology School of Materials Science and Engineering Hefei University of Technology Hefei 230009 P. R. China
| | - Chengchu Zhang
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment Institute of Industry & Equipment Technology School of Materials Science and Engineering Hefei University of Technology Hefei 230009 P. R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Nanjing Tech University Nanjing 210009 P. R. China
| | - Bin Zi
- School of Mechanical Engineering Hefei University of Technology Hefei 230009 P. R. China
| | - Ningzhong Bao
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Nanjing Tech University Nanjing 210009 P. R. China
| | - Wei Chen
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing The Hong Kong Polytechnic University Hong Kong 999077 P. R. China
| | - Yucheng Wu
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment Institute of Industry & Equipment Technology School of Materials Science and Engineering Hefei University of Technology Hefei 230009 P. R. China
| |
Collapse
|
35
|
Zhang Y, Ma C, Xie J, Ågren H, Zhang H. Black Phosphorus/Polymers: Status and Challenges. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2100113. [PMID: 34323318 DOI: 10.1002/adma.202100113] [Citation(s) in RCA: 31] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/06/2021] [Revised: 01/30/2021] [Indexed: 06/13/2023]
Abstract
As a newly emerged mono-elemental nanomaterial, black phosphorus (BP) has been widely investigated for its fascinating physical properties, including layer-dependent tunable band gap (0.3-1.5 eV), high ON/OFF ratio (104 ), high carrier mobility (103 cm2 V-1 s-1 ), excellent mechanical resistance, as well as special in-plane anisotropic optical, thermal, and vibrational characteristics. However, the instability caused by chemical degradation of its surface has posed a severe challenge for its further applications. A focused BP/polymer strategy has more recently been developed and implemented to hurdle this issue, so at present BP/polymers have been developed that exhibit enhanced stability, as well as outstanding optical, thermal, mechanical, and electrical properties. This has promoted researchers to further explore the potential applications of black phosphorous. In this review, the preparation processes and the key properties of BP/polymers are reviewed, followed by a detailed account of their diversified applications, including areas like optoelectronics, bio-medicine, and energy storage. Finally, in accordance with the current progress, the prospective challenges and future directions are highlighted and discussed.
Collapse
Affiliation(s)
- Ye Zhang
- Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
- School of Chemistry and Chemical Engineering, University of South China, Hengyang, 421001, China
| | - Chunyang Ma
- Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| | - Jianlei Xie
- Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| | - Hans Ågren
- Department of Physics and Astronomy, Uppsala University, Box 516, Uppsala, SE-751 20, Sweden
| | - Han Zhang
- Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| |
Collapse
|
36
|
Vaghasiya JV, Křípalová K, Hermanová S, Mayorga-Martinez CC, Pumera M. Real-Time Biomonitoring Device Based on 2D Black Phosphorus and Polyaniline Nanocomposite Flexible Supercapacitors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2102337. [PMID: 34369073 DOI: 10.1002/smll.202102337] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/21/2021] [Revised: 06/01/2021] [Indexed: 06/13/2023]
Abstract
Flexible energy storage devices are becoming significantly important to power wearable and portable devices that monitor physiological parameters for many biomedical applications. Many hybrid nanomaterials based on 2D materials are used in order to improve the performance of flexible energy storage devices. Here, a hybrid nanocomposite is synthesized through in situ polymerization of aniline in the presence of black phosphorus (BP) nanoflakes. This nanocomposite, polyaniline (PANI)@BP, is employed to fabricate flexible supercapacitor (FSC) electrodes. PANI@BP FSCs can provide a power source for biometric devices. The generated signal can be transmitted to a smartphone in real time via wireless communication. Such a compact and lightweight integrated device has been used to track a human heart beat while powered by PANI@BP FSC. These findings are providing a promising example of a flexible energy storage device that can be integrated with different real-time health monitoring devices.
Collapse
Affiliation(s)
- Jayraj V Vaghasiya
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague, CZ-166 28, Czech Republic
| | - Kristýna Křípalová
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague, CZ-166 28, Czech Republic
| | - Soňa Hermanová
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague, CZ-166 28, Czech Republic
- 3D Printing and Innovation Hub, Department of Food Technology, Mendel University in Brno, Zemedelska 1, Brno, CZ-613 00, Czech Republic
| | - Carmen C Mayorga-Martinez
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague, CZ-166 28, Czech Republic
| | - Martin Pumera
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague, CZ-166 28, Czech Republic
- 3D Printing and Innovation Hub, Department of Food Technology, Mendel University in Brno, Zemedelska 1, Brno, CZ-613 00, Czech Republic
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonseiro, Seodaemun-gu, Seoul, 03722, Korea
- Department of Medical Research, China Medical, University Hospital, China Medical University, No. 91 Hsueh-Shih Road, Taichung, 40402, Taiwan
- Future Energy and Innovation Lab, Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno, CZ-612 00, Czech Republic
| |
Collapse
|
37
|
Pan Z, Kang L, Li T, Waqar M, Yang J, Gu Q, Liu X, Kou Z, Wang Z, Zheng L, Wang J. Black Phosphorus@Ti 3C 2T x MXene Composites with Engineered Chemical Bonds for Commercial-Level Capacitive Energy Storage. ACS NANO 2021; 15:12975-12987. [PMID: 34370437 DOI: 10.1021/acsnano.1c01817] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Electrolyte-accessibly porous yet densely packed MXene composite electrodes with high ion-accessible surface and rapid ion transport rate have shown exceptional promise for high-volumetric-performance supercapacitors (SCs), but they are largely limited by the insufficient rate capability and poor electrochemical cyclability, in association with the instability in mechanical robustness of the porous network structures. Taking advantage of chemical bonding design, herein a black phosphorus (BP)@MXene compact film of 3D porous network structure is successfully made by in situ growth of BP nanoparticles on crumbled MXene flakes. The strong interfacial interaction (Ti-O-P bonds) formed at the BP-MXene interfaces not only enhances the atomic charge polarization in the BP-MXene heterostructures, leading to efficient interfacial electron transport, but also stabilizes the 3D porous yet dense architecture with much improved mechanical robustness. Consequently, fully packaged SCs using the BP@MXene composite films with a practical-level of mass loading (∼15 mg cm-2) deliver a high stack volumetric energy density of 72.6 Wh L-1, approaching those of lead-acid batteries (50-90 Wh L-1), together with a long-term stability (90.58% capacitance retention after 50000 cycles). The achievement of such high energy density bridges the gap between traditional batteries and SCs and represents a timely breakthrough in designing compact electrodes toward commercial-level capacitive energy storage.
Collapse
Affiliation(s)
- Zhenghui Pan
- Department of Materials Science and Engineering, National University of Singapore, 117574 Singapore, Singapore
| | - Lixing Kang
- Division of Advanced Materials, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, 215123 Suzhou, P. R. China
| | - Tan Li
- College of Environment and Energy, South China University of Technology, 510000 Guangzhou, P. R. China
| | - Moaz Waqar
- Department of Materials Science and Engineering, National University of Singapore, 117574 Singapore, Singapore
| | - Jie Yang
- Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, 117585 Singapore, Singapore
| | - Qilin Gu
- Department of Materials Science and Engineering, National University of Singapore, 117574 Singapore, Singapore
| | - Ximeng Liu
- Department of Materials Science and Engineering, National University of Singapore, 117574 Singapore, Singapore
| | - Zongkui Kou
- Department of Materials Science and Engineering, National University of Singapore, 117574 Singapore, Singapore
| | - Zhao Wang
- Department of Materials Science and Engineering, National University of Singapore, 117574 Singapore, Singapore
| | - Lirong Zheng
- Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, 100049 Beijing, P. R. China
| | - John Wang
- Department of Materials Science and Engineering, National University of Singapore, 117574 Singapore, Singapore
| |
Collapse
|
38
|
Hu Y, Ji Q, Huang M, Chang L, Zhang C, Wu G, Zi B, Bao N, Chen W, Wu Y. Light-Driven Self-Oscillating Actuators with Phototactic Locomotion Based on Black Phosphorus Heterostructure. Angew Chem Int Ed Engl 2021; 60:20511-20517. [PMID: 34272927 DOI: 10.1002/anie.202108058] [Citation(s) in RCA: 32] [Impact Index Per Article: 10.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2021] [Indexed: 12/28/2022]
Abstract
Developing self-oscillating soft actuators that enable autonomous, continuous, and directional locomotion is significant in biomimetic soft robotics fields, but remains great challenging. Here, an untethered soft photoactuators based on covalently-bridged black phosphorus-carbon nanotubes heterostructure with self-oscillation and phototactic locomotion under constant light irradiation is designed. Owing to the good photothermal effect of black phosphorus heterostructure and thermal deformation of the actuator components, the new actuator assembled by heterostructured black phosphorus, polymer and paper produces light-driven reversible deformation with fast and large response. By using this actuator as mechanical power and designing a robot configuration with self-feedback loop to generate self-oscillation, an inchworm-like actuator that can crawl autonomously towards the light source is constructed. Moreover, due to the anisotropy and tailorability of the actuator, an artificial crab robot that can simulate the sideways locomotion of crabs and simultaneously change color under light irradiation is also realized.
Collapse
Affiliation(s)
- Ying Hu
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment, Institute of Industry & Equipment Technology, School of Materials Science and Engineering, Hefei University of Technology, Hefei, 230009, P. R. China
| | - Qixiao Ji
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment, Institute of Industry & Equipment Technology, School of Materials Science and Engineering, Hefei University of Technology, Hefei, 230009, P. R. China
| | - Majing Huang
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment, Institute of Industry & Equipment Technology, School of Materials Science and Engineering, Hefei University of Technology, Hefei, 230009, P. R. China
| | - Longfei Chang
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment, Institute of Industry & Equipment Technology, School of Materials Science and Engineering, Hefei University of Technology, Hefei, 230009, P. R. China
| | - Chengchu Zhang
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment, Institute of Industry & Equipment Technology, School of Materials Science and Engineering, Hefei University of Technology, Hefei, 230009, P. R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing, 210009, P. R. China
| | - Bin Zi
- School of Mechanical Engineering, Hefei University of Technology, Hefei, 230009, P. R. China
| | - Ningzhong Bao
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing, 210009, P. R. China
| | - Wei Chen
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong, 999077, P. R. China
| | - Yucheng Wu
- Anhui Province Key Lab of Aerospace Structural Parts Forming Technology and Equipment, Institute of Industry & Equipment Technology, School of Materials Science and Engineering, Hefei University of Technology, Hefei, 230009, P. R. China
| |
Collapse
|
39
|
Recent applications of black phosphorus and its related composites in electrochemistry and bioelectrochemistry: A mini review. Electrochem commun 2021. [DOI: 10.1016/j.elecom.2021.107095] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022] Open
|
40
|
Wu X, Zhu X, Tao H, Wu G, Xu J, Bao N. Covalently Aligned Molybdenum Disulfide-Carbon Nanotubes Heteroarchitecture for High-Performance Electrochemical Capacitors. Angew Chem Int Ed Engl 2021; 60:21295-21303. [PMID: 34184395 DOI: 10.1002/anie.202107734] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/09/2021] [Indexed: 11/12/2022]
Abstract
Advanced two-dimensional nanosheets that promote the dynamic transportation and storage capacity of ions are significant for high-performance electrochemical capacitors (ECs). However, such materials often possess a low energy density. We have developed an ordered heteroarchitecture of molybdenum disulfide-carbon nanotubes (MoS2 -CNTs) in which CNTs are vertically grafted within a MoS2 framework by C-Mo covalent bonds. Benefiting from this in situ vertical bridge, high-speed interlaminar conductivity, unimpeded ion-diffusion channels and sufficient pseudocapacitive reactivity, the MoS2 -CNTs presents ultralarge capacitance (5485 F g-1 ) and good structural stability in potassium hydroxide electrolyte. Moreover, the all-unified solid-state flexible ECs obtained through direct-write printing construction deliver high energy density (226 mWh g-1 ), good capacitance (723 F g-1 ) and stable high/low-temperature operating ability, which can power a wearable health-monitoring device.
Collapse
Affiliation(s)
- Xingjiang Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering, Nanjing Tech University, Nanjing, 210009, P. R. China.,The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Xiaolin Zhu
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering, Nanjing Tech University, Nanjing, 210009, P. R. China
| | - Houyu Tao
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering, Nanjing Tech University, Nanjing, 210009, P. R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering, Nanjing Tech University, Nanjing, 210009, P. R. China
| | - Jianhong Xu
- The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing, 100084, P. R. China
| | - Ningzhong Bao
- State Key Laboratory of Materials-Oriented Chemical Engineering, orgDiv/>College of Chemical Engineering, Nanjing Tech University, Nanjing, 210009, P. R. China
| |
Collapse
|
41
|
Zhang Y, Mei HX, Cao Y, Yan XH, Yan J, Gao HL, Luo HW, Wang SW, Jia XD, Kachalova L, Yang J, Xue SC, Zhou CG, Wang LX, Gui YH. Recent advances and challenges of electrode materials for flexible supercapacitors. Coord Chem Rev 2021. [DOI: 10.1016/j.ccr.2021.213910] [Citation(s) in RCA: 93] [Impact Index Per Article: 31.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
|
42
|
Zhu X, Hu Y, Wu G, Chen W, Bao N. Two-Dimensional Nanosheets-Based Soft Electro-Chemo-Mechanical Actuators: Recent Advances in Design, Construction, and Applications. ACS NANO 2021; 15:9273-9298. [PMID: 34018737 DOI: 10.1021/acsnano.1c02356] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Soft electro-chemo-mechanical actuators have received enormous interest in biomimetic technologies, wearable electronics, and microelectromechanical systems due to their low voltage-driven large deformation, fast response, high strain, and working durability. Two-dimensional (2D) nanosheets, which can highly promote ion-induced micromotion to macrodeformation, have outstandingly been used as prime actuator electrodes because of their ordered microstructures, tunable interlayer spaces, controllable electrochemical activities, and excellent electrical and mechanical properties. Here, this review primarily focuses on the recent advances in key 2D electro-chemo-mechanical actuator electrodes, including graphene, MXenes, graphitic carbon nitride, molybdenum disulfide, black phosphorus, and graphdiyne. Various synthetic strategies of electrode design, such as microstructural architecture, active-site regulation, and channel construction, for achieving high ionic kinetic transport, charge storage, and electrochemical-mechanical performances are discussed. The advanced structures with diverse building principles that provide ordered and active ionic pathways for high actuation speed and strain are emphasized. Furthermore, the innovative applications of electro-chemo-mechanical actuators toward biomimetic robots and smart devices are highlighted. Finally, the current challenges and future perspectives are also proposed. The aim of this review is to provide the guiding significance for scientific researchers and industrial engineers to design higher performance next-generation electro-chemo-mechanical actuators.
Collapse
Affiliation(s)
- Xiaolin Zhu
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 210009, P.R. China
| | - Ying Hu
- Institute of Industry and Equipment Technology, Hefei University of Technology, Hefei, Anhui 230009, P.R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 210009, P.R. China
| | - Wei Chen
- Research Centre for Smart Wearable Technology, Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong 999077, P.R. China
| | - Ningzhong Bao
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 210009, P.R. China
| |
Collapse
|
43
|
Weng L, Zhang X, Fan W, Lu Y. Development of the inorganic nanoparticles reinforced alginate‐based hybrid fiber for wound care and healing. J Appl Polym Sci 2021. [DOI: 10.1002/app.51228] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Affiliation(s)
- Lin Weng
- Department of Chemical Engineering Xi'an Jiaotong University Xi'an China
| | - Xiaolin Zhang
- School of Textile Science and Engineering Xi'an Polytechnic University Xi'an China
- Key Laboratory of Functional Textile Material and Product (Xi'an Polytechnic University) Ministry of Education Xi'an China
| | - Wei Fan
- School of Textile Science and Engineering Xi'an Polytechnic University Xi'an China
- Key Laboratory of Functional Textile Material and Product (Xi'an Polytechnic University) Ministry of Education Xi'an China
| | - Yao Lu
- School of Textile Science and Engineering Xi'an Polytechnic University Xi'an China
- Key Laboratory of Functional Textile Material and Product (Xi'an Polytechnic University) Ministry of Education Xi'an China
| |
Collapse
|
44
|
Chen C, Hu J, Yang X, Yang T, Qu J, Guo C, Li CM. Ambient-Stable Black Phosphorus-Based 2D/2D S-Scheme Heterojunction for Efficient Photocatalytic CO 2 Reduction to Syngas. ACS APPLIED MATERIALS & INTERFACES 2021; 13:20162-20173. [PMID: 33885274 DOI: 10.1021/acsami.1c03482] [Citation(s) in RCA: 43] [Impact Index Per Article: 14.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Black phosphorus (BP), an emerging remarkable photocatalytic semiconductor, is arousing strong interests in this field of solar-driven CO2 reduction, but its stability and activity are still facing huge challenges. Here, an ambient-stable and effective 2D/2D heterostructure of BP/bismuth tungstate (Bi2WO6) with oxygen vacancy is innovatively designed for syngas production via photocatalytic CO2 reduction. This work, not only resolves the stability problem of BP nanosheets by anchoring ultrasmall platinum (Pt) nanoparticles (∼2 nm) but also greatly improves the charge transfer efficiency by constructing S-scheme 2D/2D heterostructure with coupled oxygen defects. As a result, the generation rates of carbon monoxide (CO) and hydrogen (H2) remarkably reach 20.5 and 16.8 μmol g-1 h-1, respectively, which are much higher than that of reported BP-based materials, and the accomplished CO/H2 ratios (1:1-2:1) are exactly the most desirable syngas for industrial applications. Thus, this work constructs an efficient and ambient-stable BP-based photocatalyst for syngas production by CO2 reduction at mild conditions.
Collapse
Affiliation(s)
- Cao Chen
- School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
| | - Jundie Hu
- School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
- College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, China
| | - Xiaogang Yang
- School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
| | - Tingyu Yang
- School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
| | - Jiafu Qu
- School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
- College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, China
| | - Chunxian Guo
- School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
| | - Chang Ming Li
- School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
- Institute of Clean Energy & Advanced Materials, Southwest University, Chongqing 400715, China
| |
Collapse
|
45
|
Huang Q, He F, Yu J, Zhang J, Du X, Li Q, Wang G, Yu Z, Chen S. Microfluidic spinning-induced heterotypic bead-on-string fibers for dual-cargo release and wound healing. J Mater Chem B 2021; 9:2727-2735. [PMID: 33683250 DOI: 10.1039/d0tb02305a] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The preparation of dual-release pharmaceutical microfibers provides an ideal material for new biomedical applications. We describe a microfluidic spinning method for engineering heterotypic bead-on-string fibers with the ability to carry dual cargos and to deliver on demand. The core of our technology is to combine microfluidic spinning with biomaterial preparation, in which hydrophobic and hydrophilic cargos can be integrated into a bead-on-string microfiber structure. We demonstrate the loading of bovine serum albumin (BSA) in the sodium alginate phase and ibuprofen in the polylactic acid (PLA) phase, respectively. The heterotypic bead-on-string fibers are biocompatible and show hemostatic ability in vivo. These heterotypic bead-on-string fibers are then woven as a skin scaffold and shown to promote wound healing by loading antibacterial and anti-inflammatory cargos.
Collapse
Affiliation(s)
- Qiu Huang
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials, Nanjing Tech University, 30 Puzhu South Road, Nanjing 211816, P. R. China.
| | | | | | | | | | | | | | | | | |
Collapse
|
46
|
Wu T, Ma Z, He Y, Wu X, Tang B, Yu Z, Wu G, Chen S, Bao N. A Covalent Black Phosphorus/Metal–Organic Framework Hetero‐nanostructure for High‐Performance Flexible Supercapacitors. Angew Chem Int Ed Engl 2021; 60:10366-10374. [DOI: 10.1002/anie.202101648] [Citation(s) in RCA: 45] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2021] [Indexed: 12/22/2022]
Affiliation(s)
- Tianyu Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Ziyang Ma
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Yunya He
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Xingjiang Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Bao Tang
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Ziyi Yu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Su Chen
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Ningzhong Bao
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| |
Collapse
|
47
|
Wu T, Ma Z, He Y, Wu X, Tang B, Yu Z, Wu G, Chen S, Bao N. A Covalent Black Phosphorus/Metal–Organic Framework Hetero‐nanostructure for High‐Performance Flexible Supercapacitors. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202101648] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Affiliation(s)
- Tianyu Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Ziyang Ma
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Yunya He
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Xingjiang Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Bao Tang
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Ziyi Yu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Su Chen
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Ningzhong Bao
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| |
Collapse
|
48
|
Thurakkal S, Feldstein D, Perea-Causín R, Malic E, Zhang X. The Art of Constructing Black Phosphorus Nanosheet Based Heterostructures: From 2D to 3D. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2005254. [PMID: 33251663 DOI: 10.1002/adma.202005254] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Revised: 10/08/2020] [Indexed: 06/12/2023]
Abstract
Assembling different kinds of 2D nanosheets into heterostructures presents a promising way of designing novel artificial materials with new and improved functionalities by combining the unique properties of each component. In the past few years, black phosphorus nanosheets (BPNSs) have been recognized as a highly feasible 2D material with outstanding electronic properties, a tunable bandgap, and strong in-plane anisotropy, highlighting their suitability as a material for constructing heterostructures. In this study, recent progress in the construction of BPNS-based heterostructures ranging from 2D hybrid structures to 3D networks is discussed, emphasizing the different types of interactions (covalent or noncovalent) between individual layers. The preparation methods, optical and electronic properties, and various applications of these heterostructures-including electronic and optoelectronic devices, energy storage devices, photocatalysis and electrocatalysis, and biological applications-are discussed. Finally, critical challenges and prospective research aspects in BPNS-based heterostructures are also highlighted.
Collapse
Affiliation(s)
- Shameel Thurakkal
- Division of Chemistry and Biochemistry, Department of Chemistry and Chemical Engineering, Chalmers University of Technology, Kemigården 4, Göteborg, SE-412 96, Sweden
| | - David Feldstein
- Division of Condensed Matter and Materials Theory, Department of Physics, Chalmers University of Technology, Kemigården 1, Göteborg, SE-412 96, Sweden
| | - Raül Perea-Causín
- Division of Condensed Matter and Materials Theory, Department of Physics, Chalmers University of Technology, Kemigården 1, Göteborg, SE-412 96, Sweden
| | - Ermin Malic
- Division of Condensed Matter and Materials Theory, Department of Physics, Chalmers University of Technology, Kemigården 1, Göteborg, SE-412 96, Sweden
| | - Xiaoyan Zhang
- Division of Chemistry and Biochemistry, Department of Chemistry and Chemical Engineering, Chalmers University of Technology, Kemigården 4, Göteborg, SE-412 96, Sweden
| |
Collapse
|
49
|
Wu T, Wu X, Li L, Hao M, Wu G, Zhang T, Chen S. Anisotropic Boron–Carbon Hetero‐Nanosheets for Ultrahigh Energy Density Supercapacitors. Angew Chem Int Ed Engl 2020. [DOI: 10.1002/ange.202011523] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
Affiliation(s)
- Tianyu Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Xingjiang Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Lianhui Li
- i-lab, Key Laboratory of multifunctional nanomaterials and smart systems Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO) Chinese Academy of Science (CAS) Suzhou 215123 P. R. China
| | - Mingming Hao
- i-lab, Key Laboratory of multifunctional nanomaterials and smart systems Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO) Chinese Academy of Science (CAS) Suzhou 215123 P. R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Ting Zhang
- i-lab, Key Laboratory of multifunctional nanomaterials and smart systems Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO) Chinese Academy of Science (CAS) Suzhou 215123 P. R. China
| | - Su Chen
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| |
Collapse
|
50
|
Wu T, Wu X, Li L, Hao M, Wu G, Zhang T, Chen S. Anisotropic Boron–Carbon Hetero‐Nanosheets for Ultrahigh Energy Density Supercapacitors. Angew Chem Int Ed Engl 2020; 59:23800-23809. [DOI: 10.1002/anie.202011523] [Citation(s) in RCA: 41] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2020] [Indexed: 11/12/2022]
Affiliation(s)
- Tianyu Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Xingjiang Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Lianhui Li
- i-lab, Key Laboratory of multifunctional nanomaterials and smart systems Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO) Chinese Academy of Science (CAS) Suzhou 215123 P. R. China
| | - Mingming Hao
- i-lab, Key Laboratory of multifunctional nanomaterials and smart systems Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO) Chinese Academy of Science (CAS) Suzhou 215123 P. R. China
| | - Guan Wu
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| | - Ting Zhang
- i-lab, Key Laboratory of multifunctional nanomaterials and smart systems Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO) Chinese Academy of Science (CAS) Suzhou 215123 P. R. China
| | - Su Chen
- State Key Laboratory of Materials-Oriented Chemical Engineering College of Chemical Engineering Jiangsu Key Laboratory of Fine Chemicals and Functional Polymer Materials Nanjing Tech University (former: Nanjing University of Technology) Nanjing 210009 P. R. China
| |
Collapse
|