Liquid-infused microstructured bioadhesives halt non-compressible hemorrhage

Superporous sponge prepared by secondary network compaction with enhanced permeability and mechanical properties for non-compressible hemostasis in pigs

Developing superporous hemostatic sponges with simultaneously enhanced permeability and mechanical properties remains challenging but highly desirable to achieve rapid hemostasis for non-compressible hemorrhage. Typical approaches to improve the permeability of hemostatic sponges by increasing porosity sacrifice mechanical properties and yield limited pore interconnectivity, thereby undermining the hemostatic efficacy and subsequent tissue regeneration. Herein, we propose a temperature-assisted secondary network compaction strategy following the phase separation-induced primary compaction to fabricate the superporous chitosan sponge with highly-interconnected porous structure, enhanced blood absorption rate and capacity, and fatigue resistance. The superporous chitosan sponge exhibits rapid shape recovery after absorbing blood and maintains sufficient pressure on wounds to build a robust physical barrier to greatly improve hemostatic efficiency. Furthermore, the superporous chitosan sponge outperforms commercial gauze, gelatin sponges, and chitosan powder by enhancing hemostatic efficiency, cell infiltration, vascular regeneration, and in-situ tissue regeneration in non-compressible organ injury models, respectively. We believe the proposed secondary network compaction strategy provides a simple yet effective method to fabricate superporous hemostatic sponges for diverse clinical applications.

Facile preparation of fatigue-resistant Mxene-reinforced chitosan cryogel for accelerated hemostasis and wound healing

The development of highly effective chitosan-based hemostatic materials that can be utilized for deep wound hemostasis remains a considerable challenge. In this study, a hemostatic antibacterial chitosan/N-hydroxyethyl acrylamide (NHEMAA)/Ti3C2Tx (CSNT) composite cryogel was facilely prepared through the physical interactions between the three components and the spontaneous condensation of NHEMAA. Because of the formation of strong crosslinked network, the CSNT cryogel showed a developed pore structure (~ 99.07 %) and superfast water/blood-triggered shape recovery, enabling it to fill the wound after contacting the blood. Its capillary effect, amino groups, negative charges, and affinity with lipid collectively induced rapid hemostasis, which was confirmed by in vitro and in vivo analysis. In addition, CSNT cryogel showed excellent photothermal antibacterial activities, high biosafety, and in vivo wound healing ability. Furthermore, the presence of chitosan effectively prevented the oxidation of MXene, thus enabling the long-term storage of the MXene-reinforced cryogel. Thus, our hemostatic cryogel demonstrates promising potential for clinical application and commercialization, as it combines high resilience, rapid hemostasis, efficient sterilization, long-term storage, and easy mass production.

A Nature-Derived, Hetero-Structured, Pro-Healing Bioadhesive Patch for High-Performance Sealing of Wet Tissues

Tissue adhesives are promising alternatives to sutures and staples to achieve wound closure and hemostasis. However, they often do not work well on tissues that are soaked in blood or other biological fluids, and organs that are typically exposed to a variety of harsh environments such as different pH values, nonhomogeneous distortions, continuous expansions and contractions, or high pressures. In this study, a nature-derived multilayered hetero-bioadhesive patch (skin secretion of Andrias davidianus (SSAD)-Patch) based on hydrophilic/hydrophobic pro-healing bioadhesives derived from the SSAD is developed, which is designed to form pressure-triggered strong adhesion with wet tissues. The SSAD-Patch is successfully applied for the sealing and healing of tissue defects within 10 s in diverse extreme injury scenarios in vivo including rat stomach perforation, small intestine perforation, fetal membrane defect, porcine carotid artery incision, and lung lobe laceration. The findings reveal a promising new type of self-adhesive regenerative SSAD-Patch, which is potentially adaptable to broad applications (under different pH values and air or liquid pressures) in sutureless wound sealing and healing.

Visible-Light Cross-Linkable Multifunctional Hydrogels Loaded with Exosomes Facilitate Full-Thickness Skin Defect Wound Healing through Participating in the Entire Healing Process

The management of severe full-thickness skin defect wounds remains a challenge due to their irregular shape, uncontrollable bleeding, high risk of infection, and prolonged healing period. Herein, an all-in-one OD/GM/QCS@Exo hydrogel was prepared with catechol-modified oxidized hyaluronic acid (OD), methylacrylylated gelatin (GM), and quaternized chitosan (QCS) and loaded with adipose mesenchymal stem cell-derived exosomes (Exos). Cross-linking of the hydrogel was achieved using visible light instead of ultraviolet light irradiation, providing injectability and good biocompatibility. Notably, the incorporation of catechol groups and multicross-linked networks in the hydrogels conferred strong adhesion properties and mechanical strength against external forces such as tensile and compressive stress. Furthermore, our hydrogel exhibited antibacterial, anti-inflammatory, and antioxidant properties along with wound-healing promotion effects. Our results demonstrated that the hydrogel-mediated release of Exos significantly promotes cellular proliferation, migration, and angiogenesis, thereby accelerating skin structure reconstruction and functional recovery during the wound-healing process. Overall, the all-in-one OD/GM/QCS@Exo hydrogel provided a promising therapeutic strategy for the treatment of full-thickness skin defect wounds through actively participating in the entire process of wound healing.

Non-Covalent Cross-Linking Hydrogel: A New Method for Visceral Hemostasis

Excessive blood loss could lead to pathological conditions such as tissue necrosis, organ failure, and death. The limitations of recently developed hemostatic approaches, such as their low mechanical strength, inadequate wet tissue adhesion, and weak hemostatic activity, pose challenges for their application in controlling visceral bleeding. In this study, a novel hydrogel (CT) made of collagen and tannic acid (TA) was proposed. By altering the proportions between the two materials, the mechanical properties, adhesion, and coagulation ability were evaluated. Compared to commercial hydrogels, this hydrogel has shown reduced blood loss and shorter hemostatic time in rat hepatic and cardiac bleeding models. This was explained by the hydrogel's natural hemostatic properties and the significant benefits of wound closure in a moist environment. Better biodegradability was achieved through the non-covalent connection between tannic acid and collagen, allowing for hemostasis without hindering subsequent tissue repair. Therefore, this hydrogel is a new method for visceral hemostasis that offers significant advantages in treating acute wounds and controlling major bleeding. And the production method is simple and efficient, which facilitates its translation to clinical applications.

Naturally Derived Injectable Dual-Cross-Linked Adhesive Hydrogel for Acute Hemorrhage Control and Wound Healing

Developing biocompatible injectable hydrogels with high mechanical strength and rapid strong tissue adhesion for hemostatic sealing of uncontrolled bleeding remains a prevailing challenge. Herein, we engineer an injectable and photo-cross-linkable hydrogel based on naturally derived gelatin methacrylate (GelMA) and N-hydroxysuccinimide-modified poly(γ-glutamic acid) (γPGA-NHS). The chemically dual-cross-linked hydrogel rapidly forms after UV light irradiation and covalently bonds to the underlying tissue to provide robust adhesion. We demonstrate a significantly improved hemostatic efficacy of the hydrogel using various injury models in rats compared to the commercially available fibrin glue. Notably, the hydrogel can achieve hemostasis in porcine liver and spleen incision, and femoral artery puncture models. Moreover, the hydrogel is used for sutureless repair of the liver defect in a rat model with a significantly suppressed inflammatory response, enhanced angiogenesis, and superior healing efficacy compared to fibrin glue. Together, this study offers a promising bioadhesive for treating severe bleeding and facilitating wound repair.

A Laparoscopically Compatible Rapid-Adhesion Bioadhesive for Asymmetric Adhesion, Non-Pressing Hemostasis, and Seamless Seal

Bioadhesive hydrogels offer unprecedented opportunities in hemostatic agents and tissue sealing; however, the application of existing bioadhesive hydrogels through narrow spaces to achieve strong adhesion in fluid-rich physiological environments is challenged either by undesired indiscriminate adhesion or weak wet tissue adhesion. Here, a laparoscopically compatible asymmetric adhesive hydrogel (aAH) composed of sprayable adhesive hydrogel powders and injectable anti-adhesive glue is proposed for hemostasis and to seal the bloody tissues in a non-pressing way, allowing for preventing postoperative adhesion. The powders can seed on the irregular bloody wound to rapidly absorb interfacial fluid, crosslink, and form an adhesive hydrogel to hemostatic seal (blood clotting time and tissue sealing in 10 s, ≈200 mm Hg of burst pressure in sealed porcine tissues). The aAH can be simply formed by crosslinking the upper powder with injectable glue to prevent postoperative adhesion (adhesive strength as low as 1 kPa). The aAH outperforms commercial hemostatic agents and sealants in the sealing of bleeding organs in live rats, demonstrating superior anti-adhesive efficiency. Further, the hemostatic seamless sealing by aAH succeeds in shortening the time of warm ischemia, decreasing the blood loss, and reducing the possibility of rebleeding in the porcine laparoscopic partial nephrectomy model.

What else should hemostatic materials do beyond hemostasis: A review

Massive blood loss due to injury is the leading cause of prehospital deaths in disasters and emergencies. Hemostatic materials are used to realize rapid hemostasis and protect patients from death. Researchers have designed and developed a variety of hemostatic materials. However, in addition to their hemostatic effect, hemostatic materials must be endowed with additional functions to meet the practical application requirements in different scenarios. Here, strategies for modifications of hemostatic materials for use in different application scenarios are listed: effective positioning at the site of deep and narrow wounds to stop bleeding, resistance to high blood pressure and wound movement to maintain wound formation, rapid and easy removal from the wound without affecting further treatment after hemostasis is completed, and continued function when retained in the wound as a dressing (such as antibacterial, antiadhesion, tissue repair, etc.). The problems encountered in the practical use of hemostatic materials and the strategies and progress of researchers will be further discussed in this review. We hope to provide valuable references for the design of more comprehensive and practical hemostatic materials.

Quaternized chitosan/oxidized bacterial cellulose cryogels with shape recovery for noncompressible hemorrhage and wound healing

Management of noncompressible torso hemorrhage is an urgent clinical requirement, desiring biomaterials with rapid hemostasis, anti-infection and excellent resilient properties. In this research, we have prepared a highly resilient cryogel with both hemostatic and antibacterial effects by chemical crosslinking and electrostatic interaction. The network structure crosslinked by quaternized chitosan and genipin was interspersed with oxidized bacterial cellulose after lyophilization. The as-prepared cryogel can quickly return to the original volume when soaking in water or blood. The appropriately sized pores in the cryogel help to absorb blood cells and further activate coagulation, while the quaternary ammonium salt groups on quaternized chitosan inhibit bacterial infections. Both cell and animal experiments showed that the cryogel was hypotoxic and could promote the regeneration of wound tissue. This research provides a new pathway for the preparation of double crosslinking cryogels and offers effective and safe biomaterials for the emergent bleeding management of incompressible wounds.

Self-Oxidated Hydrophilic Chitosan Fibrous Mats for Fatal Hemorrhage Control

Enriching erythrocytes and platelets in seconds and providing a fast seal in bleeding sites is vital to fatal hemorrhage control. Herein, hydrophilic chitosan fibrous mats (CECS-D mats) are fabricated by introducing hydrophilic carboxyethyl groups and subsequent catechol groups onto chitosan fibers. Due to strong hydrophilicity, CECS-D mats exhibit rapid liquid-absorption capacity, especially instantaneous absorptivity to the rabbit blood, which can achieve erythrocyte and platelet aggregations quickly by concentrating blood, thus promoting the formation of blood clots. Furthermore, the mats are self-oxidated to form quinone-amine adducts or quinone multimers by adjusting pH conditions, which not only provides tissue adhesion but also induces erythrocyte aggregation and platelet adhesion, further enhancing the seal and triggering quick closure to achieve fast hemostasis. Therefore, the mats reveal superior hemostatic performance in rabbit liver and spleen models over CECS mats and gauze. Especially in the fatal femoral artery injury model of rabbits, the mats reduce the blood loss by ∼75% and shortened the bleeding time by ∼50% compared with CECS mats, which have been reported to have the same hemostatic effect as commercialized Celox products in a swine femoral artery injury model. Besides, the mats are cytocompatible and degradable as well as antibacterial. This chitosan mat is a promising hemostatic material for fatal hemorrhage control.

Robust adhesive nanocomposite sponge composed of citric acid and nano clays modified cellulose for rapid hemostasis of lethal non-compressible hemorrhage

Massive bleeding control plays the main role in saving people's lives in emergency situations. Herein, modified cellulose-based nanocomposite sponges by polydopamine (PDA) and laponite nano-clay was developed to sturdily deal with non-compressible lethal severe bleeding. PDA accomplishes supreme adhesion in the bleeding site (∼405 kPa) to form strong physical barrier and seal the position. Sponges super porous (∼70 % porosity) and super absorbent capacity (48 g blood absorbed per 1 g sponge) by concentrating the blood cells and platelets provides the requirements for primary hemostasis. Synergistically, the nanocomposite sponges' intelligent chemical structure induces hemostasis by activation of the XI, IX, X, II and FVII factors of intrinsic and extrinsic coagulation pathways. Excellent hemostatic performance of sponges in-vitro was assessed by RBC accumulation (∼100 %), blood clotting index (∼10 %), platelet aggregation/activation (∼93 %) and clotting time. The nanocomposite sponges depicted super performance in the fatal high-pressure non-compressible hemorrhage model by reducing of >2, 15 and 3 times in the bleeding amount at New Zealand rabbit's heart and liver, and rat's femoral artery bleeding models, respectively compared to commercial hemostatic agents (Pvalue˂0.001). The in-vivo host response results exhibited biosafety with no systemic and significant local inflammatory response by hematological, pathological and biochemical parameters assessments.

A 3D printable tissue adhesive

Tissue adhesives are promising alternatives to sutures and staples for joining tissues, sealing defects, and immobilizing devices. However, existing adhesives mostly take the forms of glues or hydrogels, which offer limited versatility. We report a direct-ink-write 3D printable tissue adhesive which can be used to fabricate bioadhesive patches and devices with programmable architectures, unlocking new potential for application-specific designs. The adhesive is conformable and stretchable, achieves robust adhesion with wet tissues within seconds, and exhibits favorable biocompatibility. In vivo rat trachea and colon defect models demonstrate the fluid-tight tissue sealing capability of the printed patches, which maintained adhesion over 4 weeks. Moreover, incorporation of a blood-repelling hydrophobic matrix enables the printed patches to seal actively bleeding tissues. Beyond wound closure, the 3D printable adhesive has broad applicability across various tissue-interfacing devices, highlighted through representative proof-of-concept designs. Together, this platform offers a promising strategy toward developing advanced tissue adhesive technologies.

Sequential-Crosslinking Fibrin Glue for Rapid and Reinforced Hemostasis

Achieving hemostasis effectively is essential for surgical success and excellent patient outcomes. However, it is challenging to develop hemostatic adhesives that are fast-acting, strongly adherent, long-lasting, and biocompatible for treating hemorrhage. In this study, a sequential crosslinking fibrin glue (SCFG) is developed, of which the first network of the fibrin glue forms in situ within 2 s to act as an initial physical barrier and locks the gelatin methacryloyl precursor for tight construction of the second network to enhance wet adhesion and durability for tissues covered with blood. The sequential crosslinking glue can provide large pressures (≈280 mmHg of burst pressure), makes strong (38 kPa of shear strength) and tough (≈60 J m-2 of interfacial toughness) interfaces with wet tissues, and outperforms commercial hemostatic agents and gelatin methacryloyl. SCFG are demonstrated as an effective and safe sealant to enhance the treatment outcomes of bleeding tissues in rat, rabbit, and pig models. The ultrafast gelation, strong adhesion and durability, excellent compatibility, and easy manufacture of SCFG make it a promising hemostatic adhesive for clinical applications.

Long-term in vivo degradation and biocompatibility of degradable pHEMA hydrogels containing graphene oxide

Developing biocompatible, non-fouling and biodegradable hydrogels for blood-contacting devices remains a demanding challenge. Such materials should promote natural healing, prevent clotting, and undergo controlled degradation. This study evaluates the biocompatibility and biodegradation of degradable poly(2-hydroxyethyl methacrylate) (d-pHEMA) hydrogels with or without reinforcement with oxidized few-layer graphene (d-pHEMA/M5ox) in a long term implantation in rats, assessing non-desired side-effects (irritation, chronic toxicity, immune response). Subcutaneous implantation over 6 months revealed degradation of both hydrogels, despite slower for d-pHEMA/M5ox, with degradation products found in intracellular vesicles. No inflammation nor infection at implantation areas were observed, and no histopathological findings were detected in parenchymal organs. Immunohistochemistry confirmed d-pHEMA and d-pHEMA/M5ox highly anti-adhesiveness. Gene expression of macrophages markers revealed presence of both M1 and M2 macrophages at all timepoints. M1/M2 profile after 6 months reveals an anti-inflammatory environment, suggesting no chronic inflammation, as also demonstrated by cytokines (IL-α, TNF-α and IL-10) analysis. Overall, modification of pHEMA towards a degradable material was successfully achieved without evoking a loss of its inherent properties, specially its anti-adhesiveness and biocompatibility. Therefore, these hydrogels hold potential as blank-slate for further modifications that promote cellular adhesion/proliferation for tissue engineering applications, namely for designing blood contacting devices with different load bearing requirements. STATEMENT OF SIGNIFICANCE: Biocompatibility, tunable biodegradation kinetics, and suitable immune response with lack of chronic toxicity and irritation, are key features in degradable blood contact devices that demand long-term exposure. We herein evaluate the 6-month in vivo performance of a degradable and hemocompatible anti-adhesive hydrogel based in pHEMA, and its mechanically reinforced formulation with few-layer graphene oxide. This subcutaneous implantation in a rat model, shows gradual degradation with progressive changes in material morphology, and no evidence of local inflammation in surrounding tissue, neither signs of inflammation or adverse reactions in systemic organs, suggesting biocompatibility of degradation products. Such hydrogels exhibit great potential as a blank slate for tissue engineering applications, including for blood contact, where cues for specific cells can be incorporated.

Bioadhesive Technology Platforms

Bioadhesives have emerged as transformative and versatile tools in healthcare, offering the ability to attach tissues with ease and minimal damage. These materials present numerous opportunities for tissue repair and biomedical device integration, creating a broad landscape of applications that have captivated clinical and scientific interest alike. However, fully unlocking their potential requires multifaceted design strategies involving optimal adhesion, suitable biological interactions, and efficient signal communication. In this Review, we delve into these pivotal aspects of bioadhesive design, highlight the latest advances in their biomedical applications, and identify potential opportunities that lie ahead for bioadhesives as multifunctional technology platforms.

Progress and future prospects of hemostatic materials based on nanostructured clay minerals

The occurrence of uncontrolled hemorrhage is a significant threat to human life and health. Although hemostatic materials have made remarkable advances in the biomaterials field, it remains a challenge to develop safe and effective hemostatic materials for global medical use. Natural clay minerals (CMs) have long been used as traditional inorganic hemostatic agents due to their good hemostatic capability, biocompatibility and easy availability. With the advancement of science, technology and ideology, CM-based hemostatic materials have undergone continuous innovations by integrating new inspirations with conventional concepts. This review systematically summarizes the hemostatic mechanisms of different natural CMs based on their nanostructures. Moreover, it also comprehensively reviews the latest research progress for CM-based hemostatic hybrid and nanocomposite materials, and discusses the challenges and developments in this field.

Gelatin Sponges with a Uniform Interoperable Pore Structure and Biodegradability for Liver Injury Hemostasis and Tissue Regeneration

Developing a hemostatic sponge that can effectively control bleeding from visceral injuries while guiding in situ tissue regeneration in incompressible wounds remains a challenge. Most of the existing hemostatic sponges degrade slowly, are relatively single-functioning, and cannot cope with complex environments. Herein, a biodegradable rapidly hemostatic sponge (GPZ) was created by dual-dynamic-bond cross-linking among Zn2+, protocatechualdehyde (PA)-containing catechol and aldehyde groups, and gelatin. GPZ had a uniformly distributed interconnected pore structure with excellent fluid absorption. It could effectively absorb the oozing blood and increase the blood concentration while stimulating platelet activation and accelerating blood coagulation. Compared to commercial hemostats, GPZ treatment significantly accelerated hemostasis in the rat liver defect model (∼0.33 min, ≥50% reduction in the hemostatic time) and in the rabbit liver defect model (∼1.02 min, ≥60% reduction in the hemostatic time). Additionally, GPZ had excellent antibacterial and antioxidant properties that effectively protected the wound from infection and excessive inflammation. In the liver regeneration model, GPZ significantly increased the rate of hepatic tissue repair and promoted rapid functional recovery without complications and adverse reactions. Overall, we designed a simple and effective biodegradable rapid hemostatic sponge with good clinical translational potential for treating lethal incompressible bleeding and promoting wound healing.

Double-Cross-Linked Hydrogel with Long-Lasting Underwater Adhesion: Enhancement of Maxillofacial In Situ and Onlay Bone Retention

Bone retention is a usual clinical problem existing in a lot of maxillofacial surgeries involving bone reconstruction and bone transplantation, which puts forward the requirements for bone adhesives that are stable, durable, biosafe, and biodegradable in wet environment. To relieve the suffering of patients during maxillofacial surgery with one-step operation and satisfying repair, herein, we developed a double-cross-linked A-O hydrogel named by its two components: [(3-Aminopropyl) methacrylamide]-co-{[Tris(hydroxymethyl) methyl] acrylamide} and oxidated methylcellulose. With excellent bone adhesion ability, it can maintain long-lasting stable underwater bone adhesion for over 14 days, holding a maximum adhesion strength of 2.32 MPa. Schiff-base reaction and high-density hydrogen bonds endow the hydrogel with strong cohesion and adhesion performance as well as maneuverable properties such as easy formation and injectability. A-O hydrogel not only presents rarely reported long-lasting underwater adhesion of hard tissue but also owns inherent biocompatibility and biodegradation properties with a porous structure that facilitates the survival of bone graft. Compared to the commercial cyanoacrylate adhesive (3 M Vetbond Tissue Adhesive), the A-O hydrogel is confirmed to be safer, more stable, and more effective in calvarial in situ bone retention model and onlay bone retention model of rat, providing a practical solution for the everyday scenario of clinical bone retention.

Rational Design of Bioactive Materials for Bone Hemostasis and Defect Repair

Everyday unnatural events such as trauma, accidents, military conflict, disasters, and even medical malpractice create open wounds and massive blood loss, which can be life-threatening. Fractures and large bone defects are among the most common types of injuries. Traditional treatment methods usually involve rapid hemostasis and wound closure, which are convenient and fast but may result in various complications such as nerve injury, deep infection, vascular injury, and deep hematomas. To address these complications, various studies have been conducted on new materials that can be degraded in the body and reduce inflammation and abscesses in the surgical area. This review presents the latest research progress in biomaterials for bone hemostasis and repair. The mechanisms of bone hemostasis and bone healing are first introduced and then principles for rational design of biomaterials are summarized. After providing representative examples of hemostatic biomaterials for bone repair, future challenges and opportunities in the field are proposed.

Development of polydopamine functionalized porous starch for bleeding control with the assistance of NIR light

Efficient hemorrhage control of severe wound injuries is an urgent medical need, deserving agents with promising blood coagulation and biocompatible characteristics. Current work developed polydopamine (PDA) functionalized porous starch powder (PS-PDA) for emergency bleeding treatment. The micro-morphology and elements, chemical groups, and porosity of PS-PDA were systematically characterized. Its comparison with porous starch (PS) revealed the promising potential of this composite in medical practice. On one hand, PS-PDA showed superior surface area and biomineralization affinity over PS, along with comparable hemo/cyto-compatibility. On the other hand, the photothermal effect of PDA under near Infrared (NIR) light paved the possibility to accelerate blood coagulation in situ. In vivo studies indicated PS-PDA can significantly reduce blood loss and improvement of hemostasis efficiency accompanied by NIR light exposure. These results suggest that this newly developed PS-PDA powder can serve as a promising hemostatic material for bleeding wound control.

Programming hydrogel adhesion with engineered polymer network topology

Hydrogel adhesion that can be easily modulated in magnitude, space, and time is desirable in many emerging applications ranging from tissue engineering and soft robotics to wearable devices. In synthetic materials, these complex adhesion behaviors are often achieved individually with mechanisms and apparatus that are difficult to integrate. Here, we report a universal strategy to embody multifaceted adhesion programmability in synthetic hydrogels. By designing the surface network topology of a hydrogel, supramolecular linkages that result in contrasting adhesion behaviors are formed on the hydrogel interface. The incorporation of different topological linkages leads to dynamically tunable adhesion with high-resolution spatial programmability without alteration of bulk mechanics and chemistry. Further, the association of linkages enables stable and tunable adhesion kinetics that can be tailored to suit different applications. We rationalize the physics of polymer chain slippage, rupture, and diffusion at play in the emergence of the programmable behaviors. With the understanding, we design and fabricate various soft devices such as smart wound patches, fluidic channels, drug-eluting devices, and reconfigurable soft robotics. Our study presents a simple and robust platform in which adhesion controllability in multiple aspects can be easily integrated into a single design of a hydrogel network.

Catechol-chitosan/carboxymethylated cotton-based Janus hemostatic patch for rapid hemostasis in coagulopathy

Uncontrolled bleeding is the leading cause of death, and the death risk of bleeding from coagulopathy is even higher. By infusing the relevant coagulation factors, bleeding in patients with coagulopathy can be clinically treated. However, there are not many emergency hemostatic products accessible for coagulopathy patients. In response, a Janus hemostatic patch (PCMC/CCS) with a two-layer structure of partly carboxymethylated cotton (PCMC) and catechol-grafted chitosan (CCS) was developed. Ultra-high blood absorption (4000 %) and excellent tissue adhesion (60 kPa) were both displayed by PCMC/CCS. The proteomic analysis revealed that PCMC/CCS has significantly contributed to the creative generation of FV, FIX, and FX, as well as to the substantial enrichment of FVII and FXIII, re-paving the initially blocked coagulation pathway of coagulopathy to promote hemostasis. The in vivo bleeding model of coagulopathy demonstrated that PCMC/CCS was substantially more effective than gauze and commercial gelatin sponge at achieving hemostasis in just 1 min. The study provides one of the first investigations on procoagulant mechanisms in anticoagulant blood conditions. Rapid hemostasis in coagulopathy will be significantly affected by the results of this experiment.

Mimosa-Inspired Stimuli-Responsive Curling Bioadhesive Tape Promotes Peripheral Nerve Regeneration

Trauma often results in peripheral nerve injuries (PNIs). These injuries are particularly challenging therapeutically because of variable nerve diameters, slow axonal regeneration, infection of severed ends, fragility of the nerve tissue, and the intricacy of surgical intervention. Surgical suturing is likely to cause additional damage to peripheral nerves. Therefore, an ideal nerve scaffold should possess good biocompatibility, diameter adaptability, and a stable biological interface for seamless biointegration with tissues. Inspired by the curl of Mimosa pudica, this study aimed to design and develop a diameter-adaptable, suture-free, stimulated curling bioadhesive tape (SCT) hydrogel for repairing PNI. The hydrogel is fabricated from chitosan and acrylic acid-N-hydroxysuccinimide lipid via gradient crosslinking using glutaraldehyde. It closely matches the nerves of different individuals and regions, thereby providing a bionic scaffold for axonal regeneration. In addition, this hydrogel rapidly absorbs tissue fluid from the nerve surface achieving durable wet-interface adhesion. Furthermore, the chitosan-based SCT hydrogel loaded with insulin-like growth factor-I effectively promotes peripheral nerve regeneration with excellent bioactivity. This procedure for peripheral nerve injury repair using the SCT hydrogel is simple and reduces the difficulty and duration of surgery, thereby advancing adaptive biointerfaces and reliable materials for nerve repair.

Biomimetic and Multifunctional Hemostatic Hydrogel with Rapid Thermoresponsive Gelation and Robust Wet Adhesion for Emergency Hemostasis: A Rational Design Based on Photo-Cross-Linking Coordinated Hydrophilic-Hydrophobic Balance Strategies

Uncontrolled bleeding in emergency situations is a great threat to both military and civilian lives, and an ideal hemostat for effectively controlling prehospital hemorrhage is urgently needed but still lacking. Although hemostatic hydrogels are promising for emergency hemostasis, they are currently challenged by either the mutual exclusion between a short gelation time and strong adhesive network or the insufficient functionality of ingredients and complicated operations for in situ curing. Herein, an extracellular matrix biopolymer-based and multifunctional hemostatic hydrogel that simultaneously integrates rapid thermoresponsive gelation, robust wet adhesion, and ease of use in emergencies is rationally engineered. This hydrogel can be conveniently used via simple injection and achieves instant sol-gel phase transition at body temperature. Its comprehensive performance could be facilely regulated by tuning the proportions of components, and the optimal performance (gelation time 6-8 s, adhesion strength 125 ± 3.6 kPa, burst pressure 282 ± 4.1 mmHg) is established due to the coordinated enhancement of the photo-cross-linking pretreatment and the hydrophilic-hydrophobic balance among various interactions in the hydrogel system. Additionally, it exhibits significant coagulation effect in vitro and enables effective hemostasis and wound healing in vivo. This work provides a promising platform for versatile applications of hydrogel-based materials, including emergency hemostasis.

Tissue-mimetic hybrid bioadhesives for intervertebral disc repair

Intervertebral disc (IVD) degeneration and herniation often necessitate surgical interventions including a discectomy with or without a nucleotomy, which results in a loss of the normal nucleus pulposus (NP) and a defect in the annulus fibrosus (AF). Due to the limited regenerative capacity of the IVD tissue, the annular tear may remain a persistent defect and result in recurrent herniation post-surgery. Bioadhesives are promising alternatives but show limited adhesion performance, low regenerative capacity, and inability to prevent re-herniation. Here, we report hybrid bioadhesives that combine an injectable glue and a tough sealant to simultaneously repair and regenerate IVD post-nucleotomy. The glue fills the NP cavity while the sealant seals the AF defect. Strong adhesion occurs with the IVD tissues and survives extreme disc loading. Furthermore, the glue can match native NP mechanically, and support the viability and matrix deposition of encapsulated cells, serving as a suitable cell delivery vehicle to promote NP regeneration. Besides, biomechanical tests with bovine IVD motion segments demonstrate the capacity of the hybrid bioadhesives to restore the biomechanics of bovine discs under cyclic loading and to prevent permanent herniation under extreme loading. This work highlights the synergy of bioadhesive and tissue-engineering approaches. Future works are expected to further improve the tissue specificity of bioadhesives and prove their efficacy for tissue repair and regeneration.

Morphological, cytotoxicity, and coagulation assessments of perlite as a new hemostatic biomaterial

Hemorrhage control is vital for clinical outcomes after surgical treatment and pre-hospital trauma injuries. Numerous biomaterials have been investigated to control surgical and traumatic bleeding. In this study, for the first time, perlite was introduced as an aluminosilicate biomaterial and compared with other ceramics such as kaolin and bentonite in terms of morphology, cytotoxicity, mutagenicity, and hemostatic evaluations. Cellular studies showed that perlite has excellent viability, good cell adhesion, and high anti-mutagenicity. Coagulation results demonstrated that the shortest clotting time (140 seconds with a concentration of 50 mg mL^-1) was obtained for perlite samples compared to other samples. Therefore, perlite seems most efficient as a biocompatible ceramic for hemorrhage control and other biomaterial designs.

A Choline Phosphoryl-Conjugated Chitosan/Oxidized Dextran Injectable Self-Healing Hydrogel for Improved Hemostatic Efficacy

The development of injectable hydrogels with good biocompatibility, self-healing, and superior hemostatic properties is highly desirable in emergency and clinical applications. Herein, we report an in situ injectable and self-healing hemostatic hydrogel based on choline phosphoryl functionalized chitosan (CS-g-CP) and oxidized dextran (ODex). The CP groups were hypothesized to accelerate hemostasis by facilitating erythrocyte adhesion and aggregation. Our results reveal that the CS-g-CP/ODex hydrogels exhibit enhanced blood clotting and erythrocyte adhesion/aggregation capacities compared to those of the CS/ODex hydrogels. The CS-g-CP₅₀/ODex₇₅ hydrogel presents rapid gelation time, good mechanical strength and tissue adhesiveness, satisfactory bursting pressure, and favorable biocompatibility. The hemostatic ability of the CS-g-CP₅₀/ODex₇₅ hydrogel was significantly improved compared to that of the CS/ODex hydrogel and commercial fibrin sealant in the rat tail amputation and liver/spleen injury models. Our study highlights the positive and synergistic effects of CP groups on hemostasis and strongly supports the CS-g-CP₅₀/ODex₇₅ hydrogel as a promising adhesive for hemorrhage control.

Chitosan-Based Hemostatic Hydrogels: The Concept, Mechanism, Application, and Prospects

The design of new hemostatic materials to mitigate uncontrolled bleeding in emergencies is challenging. Chitosan-based hemostatic hydrogels have frequently been used for hemostasis due to their unique biocompatibility, tunable mechanical properties, injectability, and ease of handling. Moreover, chitosan (CS) absorbs red blood cells and activates platelets to promote hemostasis. Benefiting from these desired properties, the hemostatic application of CS hydrogels is attracting ever-increasing research attention. This paper reviews the recent research progress of CS-based hemostatic hydrogels and their advantageous characteristics compared to traditional hemostatic materials. The effects of the hemostatic mechanism, effects of deacetylation degree, relative molecular mass, and chemical modification on the hemostatic performance of CS hydrogels are summarized. Meanwhile, some typical applications of CS hydrogels are introduced to provide references for the preparation of efficient hemostatic hydrogels. Finally, the future perspectives of CS-based hemostatic hydrogels are presented.