Photochemical generation of radicals from alkyl electrophiles using a nucleophilic organic catalyst

N-Boryl Pyridyl Anion Chemistry

ConspectusPyridine is a crucial heterocyclic compound in organic chemistry. Typically, the pyridine motif behaves as an N-nucleophile and an electron-deficient aromatic ring. Transforming the pyridine ring into an electron-rich system that exhibits reactivity contrary to classical expectations could unveil new opportunities in pyridine chemistry. This Account describes an approach to the umpolung reactivity of the pyridine ring through the formation of an unprecedented N-boryl pyridyl anion (N-BPA) intermediate that enables new catalysis and transformations.In 2017, we discovered that 4-phenylpyridine acts as an efficient catalyst for the borylation of iodo- and bromoarenes using diboron(4) compounds. Mechanistic studies revealed that the in situ formation of an N-BPA intermediate in the pyridine/diboron(4)/methoxide reaction system is a pivotal step in this transformation. Further investigations showed that N-BPA exhibits dual reactivities as both a strong electron donor and a potent nucleophile. This unique reactivity profile has unveiled novel pathways for redox catalysis, pyridine derivatizations, and umpolung transformations.Based on the electron-donor characteristic of the N-boryl pyridyl anion, we have developed a redox catalytic system mediated by a pyridine catalyst. In the pyridine/diboron(4)/base reaction system, the in situ formation of N-BPA followed by single electron transfer (SET) to a substrate with regeneration of the pyridine molecule establishes a redox catalytic cycle. This approach enables the single-electron reduction of a variety of substrates employing 4-phenylpyridine as a catalyst and diboron(4) as the electron source. Upon visible-light excitation, this intermediate transitions into its excited state, exhibiting significantly enhanced reductivity. This enables the establishment of a modular photoredox system consisting of various pyridine/diboron(4)/base combinations that allow for fine-tuning of its redox property. Using this strategy, we performed a series of challenging single-electron reduction reactions, including the single -electron reduction of nonactivated chloro- and fluoroarenes, and Birch reduction of arenes.The nucleophilic character of the N-boryl pyridyl anion was effectively harnessed to facilitate pyridine derivatization and umpolung transformations. By directly quenching the in situ-generated N-BPA with a proton source, we developed a practical approach to N-H-1,4-dihydropyridines (DHPs). Bimolecular nucleophilic substitution reaction between N-BPA and an alkyl bromide produced a 4-alkyl-1,4-DHP, which subsequently releases an alkyl radical under photoredox conditions. This process enabled a catalytic transformation of alkyl bromides into alkyl radicals. Employing 4-trifluoromethylpyridine in this chemistry, the resulting N-BPA intermediate undergoes elimination of fluoride to yield a 4-pyridyldifluoromethyl nucleophile, which then reacts with electrophiles to realize a defluorinative functionalization reaction to forge pyridyldifluoromethyl compounds. Alternatively, when 4-perfluoroalkylthiopyridine was employed, a similar elimination process occurred to form a perfluoroalkyl anion, demonstrating a novel nucleophilic perfluoroalkylation reagent that offers distinct advantages over traditional reagents.The reactivities of the N-boryl pyridyl anion described in this Account provide new insights into pyridine chemistry. We anticipate that these findings will inspire further exploration of novel reactivities and mechanisms in pyridine and related heterocyclic chemistry.

Decarboxylative Xanthylation under Photocatalytic Conditions

Xanthates are widely used in organic synthesis for the construction of various molecules and have numerous applications as bioactive compounds. Here, we present their preparation via a straightforward photocatalytic decarboxylative xanthylation process involving readily available oxime esters and xanthate dimers. This approach provides access to a wide variety of xanthate compounds in moderate to good yields, including xanthates derived from relevant pharmaceutical and bioactive molecules.

Conversion of Acids to S-Alkyl Dithiocarbamates by Decarboxylative Sulfuration Using Visible-Light Photocatalysis

S-Alkyl dithiocarbamates, as an important class of sulfur-containing compounds, play pivotal roles in diverse fields, yet methods for the synthesis that start from simple, readily available feedstocks and exhibit mild conditions and structurally diverse products are scarce. In this work, we developed an efficient approach for the synthesis of various S-alkyl dithiocarbamates via visible-light photocatalysis with readily available and structurally diverse alkyl carboxylic acids (primary, secondary, and tertiary acids, amino acids, etc.) and disulfide tetraalkylthiuram as the starting materials. This protocol features high efficiency, mild reaction conditions, a broad substrate scope, and good functional group tolerance. Potential applications are further demonstrated by a sunlight experiment, H2O as a solvent, gram-scale synthesis, and facile synthesis of bioactive molecules.

Radical Polarity

The polarity of a radical intermediate profoundly impacts its reactivity and selectivity. To quantify this influence and predict its effects, the electrophilicity/nucleophilicity of >500 radicals has been calculated. This database of open-shell species entails frequently encountered synthetic intermediates, including radicals centered at sp3, sp2, and sp hybridized carbon atoms or various heteroatoms (O, N, S, P, B, Si, X). Importantly, these computationally determined polarities have been experimentally validated for electronically diverse sets of >50 C-centered radicals, as well as N- and O- centered radicals. High correlations are measured between calculated polarity and quantified reactivity, as well as within parallel sets of competition experiments (across different radical types and reaction classes). These multipronged analyses show a strong relationship between the computed electrophilicity, ω, of a radical and its relative reactivity (krel vs Δω slopes up to 40; showing mere Δω of 0.1 eV affords up to 4-fold rate enhancement). We expect this experimentally validated database will enable reactivity and selectivity prediction (by harnessing polarity-matched rate enhancement) and assist with troubleshooting in synthetic reaction development.

Visible-Light-Driven Multicomponent Reactions for the Versatile Synthesis of Thioamides by Radical Thiocarbamoylation

Thioamides are widely used structures in pharmaceuticals and agrochemicals, as well as important synthons for the construction of sulfur-containing heterocycles. This report presents a series of visible-light-driven multicomponent reactions of amines, carbon disulfide, and olefins for the mild and versatile synthesis of linear thioamides and cyclic thiolactams. The use of inexpensive and readily available carbon disulfide as the thiocarbonyl source in a radical pathway enables the facile assembly of structurally diverse amine moieties with non-nucleophilic carbon-based reaction partners. Radical thiocarbamoylative cyclization provides a practical protocol that complements traditional approaches to thiolactams relying on deoxythionation. Mechanistic studies reveal that direct photoexcitation of in situ formed dithiocarbamate anions as well as versatile photoinduced electron transfer with diverse electron acceptors are key to the reactions.

A General Photoactive H-Bonding EDA Complex Model Drives the Selective Hydrothiolation and Hydroxysulfenylation of Carbonyl Activated Alkenes

Excitation of photoactive electron donor-acceptor (EDA) complexes to generate radical is a promising approach in radical chemistry. In this study, we introduce a new model of H-bonding EDA complexes for the selective hydrothiolation and hydroxysulfenylation of carbonyl-activated alkenes with diverse thiols under visible light conditions. The reliability of this H-bonding EDA complex model has been confirmed by meticulous experimental and theoretical calculations. Mechanistic investigations have revealed the significant influence of the solvent in determining whether the excitation of photoactive H-bonding EDA complex leads to charge transfer (CT) or energy-charge transfer (En-CT), thereby controlling Markovnikov and anti-Markovnikov selectivity. Notably, the Quantum Theory of Atoms in Molecules (QTAIM) analysis clearly shows that the excited state of the C=O-H-S EDA complex involves closed-shell partially covalent interactions.

Cooperative Catalytic Coupling of Benzyl Chlorides and Bromides with Electron-Deficient Alkenes

Benzyl radicals are an important class of intermediate. The use of visible light to generate them directly from their respective halides is an ideal synthetic strategy. The central impediment associated with their direct single-electron reduction (photo- or electro-) lies in their highly variable and structurally dependent reduction potential, which combine to make the identification of a general set of conditions difficult. Herein, we have employed a strategy of nucleophilic cooperative catalysis in which catalytic lutidine undergoes halide substitution, which decreases and levels the reduction potential. This allows a general set of photocatalytic conditions to transform a broad range of benzyl halides into radicals that can be used in the synthesis of more complex molecules, exemplified here by Giese coupling with electron-deficient alkenes.

Study on Pyridine-Boryl Radical-Promoted, Ketyl Radical-Mediated Carbon-Carbon Bond-Forming Reactions

Ketyl radicals are synthetically versatile reactive species, but their applications have been hampered by harsh generation conditions employing highly reducing metals. Recently, the pyridine-boryl radical received wide attention as a promising organic reductant because of its mildness as well as convenience in handling. While probing the utility of the pyridine-boryl radical, our group observed facile pinacol coupling reactivity that had not been known at that time. This serendipitous finding was successfully rendered into a practical synthesis of tetraaryl-1,2-diols in up to 99% yield within 1 h. Subsequently, upon examinations of various reaction manifolds, a diastereoselective ketyl-olefin cyclization was accomplished to produce cycloalkanols such as trans-2-alkyl-1-indanols. Compared to the previous methods, the stereocontrolling ability was considerably enhanced by taking advantage of the structurally modifiable boryl group that would be present near the bond-forming site. In this full account, our synthetic efforts with the O-boryl ketyl radicals are disclosed in detail, covering the discovery, optimization, scope expansion, and mechanistic analysis, including density functional theory (DFT) calculations.

Electrochemical Asymmetric Radical Functionalization of Aldehydes Enabled by a Redox Shuttle

Aminocatalysis is a well-established tool that enables the production of enantioenriched compounds under mild conditions. Its versatility is underscored by its seamless integration with various synthetic approaches. While the combination of aminocatalysis with metal catalysis, photochemistry, and stoichiometric oxidants has been extensively explored, its synergy with electrochemical activation remains largely unexplored. Herein, we present the successful merger of electrochemistry and aminocatalysis to perform SOMO-type transformations, expanding the toolkit for asymmetric electrochemical synthesis. The methodology harnesses electricity to drive the oxidation of catalytically generated enamines, which ultimately partake in enantioselective radical processes, leading to α-alkylated aldehydes. Crucially, mechanistic studies highlight how this electrochemical strategy is enabled by the use of a redox shuttle, 4,4'-dimethoxybiphenyl, to prevent catalyst degradation and furnishing the coveted compounds in good yield and high enantioselectivity.

Visible photons as ideal reagents for the activation of coloured organic compounds

In recent decades, the traceless nature of visible photons has been exploited for the development of efficient synthetic strategies for the photoconversion of colourless compounds, namely, photocatalysis, chromophore activation, and the formation of an electron donor/acceptor (EDA) complex. However, the use of photoreactive coloured organic compounds is the optimal strategy to boost visible photons as ideal reagents in synthetic protocols. In view of such premises, the present review aims to provide its readership with a collection of recent photochemical strategies facilitated via direct light absorption by coloured molecules. The protocols have been classified and presented according to the nature of the intermediate/excited state achieved during the transformation.

Nucleophilic Organocatalyst for Photochemical Carbon Radical Generation via SN2 Substitution

Photochemical generation of radicals is a powerful way to construct various molecules. But most of these methods rely on initiators or the redox properties of radical precursors. Herein, we report a photochemical organic catalyst that reacts with benzyl halide to generate carbon radical via an SN2 pathway. This nucleophilic catalyst can be easily prepared and is bench-stable. The SN2 process does not rely on the redox properties of halides, showing potential synthetic utility. Control experiments and UV-vis spectroscopic analysis indicate that the SN2 substitution adduct is the key intermediate.

Dithiocarbonate-Protected Au25 Nanorods of a Chiral D5 Configuration and NIR-II Phosphorescence

Innovative surface-protecting ligands are in constant demand due to their crucial role in shaping the configuration, property, and application of gold nanoclusters. Here, the unprecedented O-ethyl dithiocarbonate (DTX)-stabilized atomically precise gold nanoclusters, [Au25(PPh3)10(DTX)5Cl2]2+ (Au25DTX-Cl) and [Au25(PPh3)10(DTX)5Br2]2+ (Au25DTX-Br), were synthesized and structurally characterized. The introduction of bidentate DTX ligands not only endowed the gold nanocluster with unique staggered Au25 nanorod configurations but also generated the symmetry breaking from the D5d geometry of the Au25 kernels to the chiral D5 configuration of the Au25 molecules. The chirality of Au25 nanorods was notably revealed through single-crystal X-ray diffraction, and chiral separation was induced by employing chiral DTX ligands. The staggered configurations of Au25 nanorods, as opposed to eclipsed ones, were responsible for the large red shift in the emission wavelengths, giving rise to a promising near-infrared II (NIR-II, >1000 nm) phosphorescence. Furthermore, their performances in photocatalytic sulfide oxidation and electrocatalytic hydrogen evolution reactions have been examined, and it has been demonstrated that the outstanding catalytic activity of gold nanoclusters is highly related to their stability.

Metal-Organic Layers with Photosensitizer and Pyridine Pairs Activate Alkyl Halides for Photocatalytic Heck-Type Coupling with Olefins

Photochemical generation of alkyl radicals from haloalkanes often requires strong energy input from ultraviolet light or a strong photoreductant. Haloalkanes can alternatively be activated with nitrogen-based nucleophiles through a sequential SN2 reaction and single-electron reduction to access alkyl radicals, but these two reaction steps have opposite steric requirements on the nucleophiles. Herein, we report the design of Hf12 metal-organic layers (MOLs) with iridium-based photosensitizer bridging ligands and secondary-building-unit-supported pyridines for photocatalytic alkyl radical generation from haloalkanes. By bringing the photosensitizer and pyridine pairs in proximity, the MOL catalysts allowed facile access to the pyridinium salts from SN2 reactions between haloalkanes and pyridines and at the same time enhanced electron transfer from excited photosensitizers to pyridinium salts to facilitate alkyl radical generation. Consequentially, the MOLs efficiently catalyzed Heck-type cross-coupling reactions between haloalkanes and olefinic substrates to generate functionalized alkenes. The MOLs showed 4.6 times higher catalytic efficiency than the homogeneous counterparts and were recycled and reused without a loss of catalytic activity.

Photoredox-Catalyzed Alkylarylation of N-Aryl Bicyclobutyl Amides with α-Carbonyl Alkyl Bromides: Access to 3-Spirocyclobutyl Oxindoles

A visible-light-induced radical alkylarylation of N-aryl bicyclobutyl amides with α-carbonyl alkyl bromides for the synthesis of functionalized 3-spirocyclobutyl oxindoles is described in which β-selective radical addition of the alkyl radical to N-aryl bicyclobutyl amides forms a key radical intermediate followed by interception with intrinsic arene functional group. This approach can be applicable to a wide range of α-carbonyl alkyl bromides, including primary, secondary, and tertiary α-bromoalkyl esters, ketones, nitriles, and nitro compounds.

Radical relay cyclization/C-C bond formation of allyloxy-tethered aryl iodides with quinoxalin-2(1H)-ones via polysulfide anion photocatalysis

A visible-light-induced radical relay cyclization/C-C bond formation of quinoxalin-2(1H)-ones with allyloxy-tethered aryl iodides using polysulfide anions as a photocatalyst is described. This protocol allows efficient access to a variety of complicated molecules bearing both quinoxalin-2(1H)-one and 2,3-dihydrobenzofuran motifs in high yields under mild reaction conditions with a broad range of substrates.

Photochemical Deoxygenative Hydroalkylation of Unactivated Alkenes Promoted by a Nucleophilic Organocatalyst

The direct utilization of simple and abundant feedstocks in carbon-carbon bond-forming reactions to embellish sp3 -enriched chemical space is highly desirable. Herein, we report a novel photochemical deoxygenative hydroalkylation of unactivated alkenes with readily available carboxylic acid derivatives. The reaction displays broad functional group tolerance, accommodating carboxylic acid-, alcohol-, ester-, ketone-, amide-, silane-, and boronic ester groups, as well as nitrile-containing substrates. The reaction is operationally simple, mild, and water-tolerant, and can be carried out on multigram-scale, which highlights the utility of the method to prepare value-added compounds in a practical and scalable manner. The synthetic application of the developed method is further exemplified through the synthesis of suberanilic acid, a precursor of vorinostat, a drug used for the treatment of cutaneous T-cell lymphoma. A novel mechanistic approach was identified using thiol as a nucleophilic catalyst, which forms a key intermediate for this transformation. Furthermore, electrochemical studies, quantum yield, and mechanistic experiments were conducted to support a proposed catalytic cycle for the transformation.

Photochemical Reduction of Quinolines with γ-Terpinene

The saturation of aromatic scaffolds is valuable for the synthesis of complex rings. Herein, we demonstrate a process for photochemical dearomative reduction of quinolines. The process involves capture of a quinoline excited state with γ-terpinene. Importantly, the reaction is chemoselective as other easily reduced functionalities such as halogens or alkenes do not undergo reduction. The mechanism of the reaction has also been investigated. Finally, the generality of the approach towards other substrates is demonstrated.

C-F bond activation enables synthesis of aryl difluoromethyl bicyclopentanes as benzophenone-type bioisosteres

Bioisosteric design has become an essential approach in the development of drug molecules. Recent advancements in synthetic methodologies have enabled the rapid adoption of this strategy into drug discovery programs. Consequently, conceptionally innovative practices would be appreciated by the medicinal chemistry community. Here we report an expeditous synthetic method for synthesizing aryl difluoromethyl bicyclopentane (ADB) as a bioisostere of the benzophenone core. This approach involves the merger of light-driven C-F bond activation and strain-release chemistry under the catalysis of a newly designed N-anionic-based organic photocatalyst. This defluorinative coupling methodology enables the direct conversion of a wide variety of commercially available trifluoromethylaromatic C-F bonds (more than 70 examples) into the corresponding difluoromethyl bicyclo[1.1.1]pentanes (BCP) arenes/difluoromethyl BCP boronates in a single step. The strategy can also be applied to [3.1.1]and [4.1.1]propellane systems, providing access to analogues with different geometries. Moreover, we have successfully used this protocol to rapidly prepare ADB-substituted analogues of the bioactive molecule Adiporon. Biological testing has shown that the ADB scaffold has the potential to enhance the pharmacological properties of benzophenone-type drug candidates.

Photochemical α-selective radical ring-opening reactions of 1,3-disubstituted acyl bicyclobutanes with alkyl halides: modular access to functionalized cyclobutenes

Although ring-opening reactions of bicyclobutanes bearing electron-withdrawing groups, typically with β-selectivity, have evolved as a powerful platform for synthesis of cyclobutanes, their application in the synthesis of cyclobutenes remains underdeveloped. Here, a novel visible light induced α-selective radical ring-opening reaction of 1,3-disubstituted acyl bicyclobutanes with alkyl radical precursors for the synthesis of functionalized cyclobutenes is described. In particular, primary, secondary, and tertiary alkyl halides are all suitable substrates for this photocatalytic transformation, providing ready access to cyclobutenes with a single all-carbon quaternary center, or with two contiguous centers under mild reaction conditions.

Organo-photoredox-Catalyzed Selective Mono- and Bis-C-H Alkylation of Electron-Rich (Hetero)Arenes

Herein, we disclose a simple strategy for the C-H alkylation of electron-rich (hetero)arenes with alkyl bromides employing visible-light-mediated organo-photocatalytic SET processes. The generality of this method has been evidenced by the inclusion of a variety of alkyl radicals (α-alkyl-carbonyl, benzyl, cyanomethyl) as well as diverse biologically active electron-rich arenes and (hetero)arenes under mild conditions. The extent of alkylation with alkyl bromides was found to be controlled by introducing Zn(OAc)2 as a bromide scavenger, ensuring the blocking of potential bromo-arene byproduct formation under photoredox conditions. In addition, a sequential C-H alkylation strategy for selective bis-alkylation has also been developed via chronological incorporation of different alkyl radical precursors in one pot quite efficiently.

Growing Utilization of Radical Chemistry in the Synthesis of Pharmaceuticals

Our current unhealthy lifestyle and the exponential surge in the population getting affected by a variety of diseases have made pharmaceuticals or drugs an imperative part of life, making the development of innovative strategies for drug discovery or the introduction of refined, cost-effective and modern technologies for the synthesis of clinically used drugs, a need of the hour. Ever since their discovery, free radicals and radical cations or anions as reactive intermediates have captivated the chemists, resulting in an exceptional utilization of these moieties throughout the field of chemical synthesis, owing to their unprecedented and widespread reactivity. Sticking with the idea of not judging the book by its cover, despite the conventional thought process of radicals being unstable and difficult to control entities, scientists and academicians around the globe have done an appreciable amount of work utilizing both persistent as well as transient radicals for a variety of organic transformations, exemplifying them with the synthesis of significant biologically active pharmaceutical ingredients. This review truly accounts for the organic radical transformations including radical addition, radical cascade cyclization, radical/radical cross-coupling, coupling with metal-complexes and radical cations coupling with nucleophiles, that offers fascinating and unconventional approaches towards the construction of intricate structural frameworks of marketed APIs with high atom- and step-economy; complementing the otherwise employed traditional methods. This tutorial review presents a comprehensive package of diverse methods utilized for radical generation, featuring their reactivity to form critical bonds in pharmaceutical total synthesis or in building key starting materials or intermediates of their synthetic journey, acknowledging their excellence, downsides and underlying mechanisms, which are otherwise poorly highlighted in the literature. Despite great achievements over the past few decades in this area, many challenges and obstacles are yet to be unraveled to shorten the distance between the academics and the industry, which are all discussed in summary and outlook.

Stereochemical modulation of ketyl radical cyclization enabled by pyridine-boryl radicals: catalytic diastereoselective synthesis of trans-2-alkyl-1-indanols

Previously available ketyl radical cyclization conditions suffer from low and uncontrollable diastereoselectivity because of the absence of reagent-substrate interactions. In this report, stereochemical modulation was accomplished by taking advantage of the pyridine-boryl radical, which leaves the synthetically modifiable boronate moiety on the carbonyl oxygen near the reacting center during the stereo-determining cyclization step. In consequence, a catalytic diastereoselective synthesis of trans-2-substituted-1-indanols was achieved in the presence of a sterically congested six-membered diboronic ester and an efficient hydrogen atom donor.

Synthetic exploration of electrophilic xanthylation via powerful N-xanthylphthalimides

Organic xanthates are broadly applied as synthetic intermediates and bioactive molecules in synthetic chemistry. Electrophilic xanthylation represents a promising approach but has rarely been explored mainly due to the lack of powerful electrophilic reagents. Herein, synthetic exploration of electrophilic xanthylation via powerful N-xanthylphthalimides was investigated. This strategy might provide a new avenue to less-concerned but meaningful electrophilic xanthylation in organic synthesis. With the help of these powerful reagents, electrophilic xanthylation of a wide range of substrates including aryl/alkenyl boronic acids, β-keto esters, 2-oxindole, and alkyl amines, as well as previously inaccessible phenols (first report) was achieved under mild reaction conditions. Notably, this simple electrophilic xanthylation of alkyl amine substrates will occur in the desulfuration reaction, consistent with the previously reported methods. Similarly, xanthamide and thioxanthate groups could also be transformed into desired nucleophiles via this electrophilic reagent strategy. The broad substrate scope, excellent functional group compatibility and late-stage functionalization of bioactive or functional molecules made them very attractive as general reagents which will allow rapid incorporation of SC(S)R (R = OEt, Oalkyl, NEt2 and SEt) into the target molecules.

Photoinduced activation of alkyl chlorides

In recent years, the activation of unactivated alkyl chlorides through light-induced processes has emerged as a promising field in radical chemistry, and has led to new transformations in organic synthesis. Direct utilization of alkyl chlorides as C(sp3)-hybridized electrophiles enables the facile construction of carbon-carbon and carbon-heteroatom bonds. Furthermore, recent studies in medicinal chemistry indicate that their presence is associated with high levels of success in clinical trials. This review summarizes the recent advances in the photoinduced activation of unactivated alkyl chlorides and discusses the mechanistic aspects underlying these reactions. We anticipate that this review will serve as a valuable resource for researchers in the field of unactivated chemical bond functionalization, and inspire considerable developments in organic chemistry, drug synthesis, materials science and other related disciplines.

Turning sulfonyl and sulfonimidoyl fluoride electrophiles into sulfur(VI) radicals for alkene ligation

Sulfonyl and sulfonimidoyl fluorides are versatile substrates in organic synthesis and medicinal chemistry. However, they have been exclusively used as S(VI)+ electrophiles for defluorinative ligations. Converting sulfonyl and sulfonimidoyl fluorides to S(VI) radicals is challenging and underexplored due to the strong bond dissociation energy of SVI-F and high reduction potentials, but once achieved would enable dramatically expanded synthetic utility and downstream applications. In this report, we disclose a general platform to address this issue through cooperative organosuperbase activation and photoredox catalysis. Vinyl sulfones and sulfoximines are obtained with excellent E selectivity under mild conditions by coupling reactions with alkenes. The synthetic utility of this method in the preparation of functional polymers and dyes is also demonstrated.

Chemoselective Reduction of α,β-Unsaturated Carbonyl Compounds via a CS2/t-BuOK System: Dimethyl Sulfoxide as a Hydrogen Source

A novel and practical approach to access saturated ketones from unsaturated ketone derivatives via a CS₂/t-BuOK system in dimethyl sulfoxide (DMSO) is reported. The in situ generation of xanthate salt through the reaction of carbon disulfide and potassium tert-butoxide is essential to this transformation. Deuterium-labeling experiments demonstrated that DMSO can act as a hydrogen donor.

Optically Controlled Recovery and Recycling of Homogeneous Organocatalysts Enabled by Photoswitches

We address a critical challenge of recovering and recycling homogeneous organocatalysts by designing photoswitchable catalyst structures that display a reversible solubility change in response to light. Initially insoluble catalysts are UV-switched to a soluble isomeric state, which catalyzes the reaction, then back-isomerizes to the insoluble state upon completion of the reaction to be filtered and recycled. The molecular design principles that allow for the drastic solubility change over 10 times between the isomeric states, 87 % recovery by the light-induced precipitation, and multiple rounds of catalyst recycling are revealed. This proof of concept will open up opportunities to develop highly recyclable homogeneous catalysts that are important for the synthesis of critical compounds in various industries, which is anticipated to significantly reduce environmental impact and costs.

Visible-Light-Mediated Photoredox Carbon Radical Formation from Aqueous Sulfoxonium Ylides

The visible-light-induced photoredox carbon radical formation from aqueous sulfoxonium ylides has been demonstrated for the first time. While direct reduction of sulfoxonium ylides by H₂O efficiently generates the corresponding hydrocarbon compounds, the use of additional alkenes as radical acceptors alters the chemical reactivity to achieve alkene carboarylation of N-arylacrylamides. Mechanistic studies reveal two different reaction pathways involved in the carbon radical formation from aqueous sulfoxonium ylides resulting in reduction to release dimethyl sulfone and carboarylation to form DMSO.

α-Acylation of Alkenes by a Single Photocatalyst

A direct strategy for the difunctionalization of alkenes, with acylation occurring at the more substituted alkene position, would be attractive for complex ketone synthesis. We report herein a reaction driven by a single photocatalyst that enables α-acylation in this way with the introduction of a fluoromethyl, alkyl, sulfonyl or thioether group at the β-position of the alkene with high chemo- and regioselectivity under extremely mild conditions. Crucial to the success of this method are rate differences in the kinetics of radical generation through single-electron transfer (SET) between different radical precursors and the excited photocatalyst (PC*). Thus, the β-position of the alkene is first occupied by the group derived from the radical precursor that can be generated most readily, and α-keto acids could be used as an electrophilic reagent for the α-acylation of alkenes.

Controlled monodefluorination and alkylation of C(sp3)-F bonds by lanthanide photocatalysts: importance of metal-ligand cooperativity

The controlled functionalization of a single fluorine in a CF3 group is difficult and rare. Photochemical C-F bond functionalization of the sp3-C-H bond in trifluorotoluene, PhCF3, is achieved using catalysts made from earth-abundant lanthanides, (CpMe4)2Ln(2-O-3,5- t Bu2-C6H2)(1-C{N(CH)2N(iPr)}) (Ln = La, Ce, Nd and Sm, CpMe4 = C5Me4H). The Ce complex is the most effective at mediating hydrodefluorination and defluoroalkylative coupling of PhCF3 with alkenes; addition of magnesium dialkyls enables catalytic C-F bond cleavage and C-C bond formation by all the complexes. Mechanistic experiments confirm the essential role of the Lewis acidic metal and support an inner-sphere mechanism of C-F activation. Computational studies agree that coordination of the C-F substrate is essential for C-F bond cleavage. The unexpected catalytic activity for all members is made possible by the light-absorbing ability of the redox non-innocent ligands. The results described herein underscore the importance of metal-ligand cooperativity, specifically the synergy between the metal and ligand in both light absorption and redox reactivity, in organometallic photocatalysis.

Halogen-atom and group transfer reactivity enabled by hydrogen tunneling

The generation of carbon radicals by halogen-atom and group transfer reactions is generally achieved using tin and silicon reagents that maximize the interplay of enthalpic (thermodynamic) and polar (kinetic) effects. In this work, we demonstrate a distinct reactivity mode enabled by quantum mechanical tunneling that uses the cyclohexadiene derivative γ-terpinene as the abstractor under mild photochemical conditions. This protocol activates alkyl and aryl halides as well as several alcohol and thiol derivatives. Experimental and computational studies unveiled a noncanonical pathway whereby a cyclohexadienyl radical undergoes concerted aromatization and halogen-atom or group abstraction through the reactivity of an effective H atom. This activation mechanism is seemingly thermodynamically and kinetically unfavorable but is rendered feasible through quantum tunneling.

Synergistic Strategies in Aminocatalysis

Synergistic catalysis offers the unique possibility of simultaneous activation of both the nucleophile and the electrophile in a reaction. A requirement for this strategy is the stability of the active species towards the reaction conditions and the two concerted catalytic cycles. Since the beginning of the century, aminocatalysis has been established as a platform for the stereoselective activation of carbonyl compounds through HOMO-raising or LUMO-lowering. The burgeoning era of aminocatalysis has been driven by a deep understanding of these activation and stereoinduction modes, thanks to the introduction of versatile and privileged chiral amines. The aim of this review is to cover recent developments in synergistic strategies involving aminocatalysis in combination with organo-, metal-, photo-, and electro-catalysis, focusing on the evolution of privileged aminocatalysts architectures.

Boryl Radicals Enabled a Three-Step Sequence to Assemble All-Carbon Quaternary Centers from Activated Trichloromethyl Groups

The construction of diversely substituted all-carbon quaternary centers has been a longstanding challenge in organic synthesis. Methods that add three alkyl substituents to a simple C(sp³) atom rely heavily on lengthy multiple processes, which usually involve several preactivation steps. Here, we describe a straightforward three-step sequence that uses a range of readily accessible activated trichloromethyl groups as the carbon source, the three C-Cl bonds of which are selectively functionalized to introduce three alkyl chains. In each step, only a single C-Cl bond was cleaved with the choice of an appropriate Lewis base-boryl radical as the promoter. A vast range of diversely substituted all-carbon quaternary centers could be accessed directly from these activated CCl₃ trichloromethyl groups or by simple derivatizations. The use of different alkene traps in each of the three steps enabled facile collections of a large library of products. The utility of this strategy was demonstrated by the synthesis of variants of two drug molecules, whose structures could be easily modulated by varying the alkene partner in each step. The results of kinetic and computational studies enabled the design of the three-step reaction and provided insights into the reaction mechanisms.

Recent Advances in Employing Catalytic Donors and Acceptors in Electron Donor-Acceptor Complex Photochemistry

Electron donor-acceptor (EDA) complexes provide a means to initiate radical reactions under visible light irradiation using substrates that do not absorb visible light individually. Catalytic approaches to complex formation are vital for advancing this synthetic strategy as it decouples the complexation and photogeneration of radicals from substrate functionalization, a limitation inherent to stoichiometric approaches that restricts structural diversity. This Synopsis highlights recent developments in EDA complex photochemistry in which either the donor or acceptor are employed catalytically.

Photoinduced carbamoylation reactions: unlocking new reactivities towards amide synthesis

The preparation of amide-containing compounds is among the most interesting and challenging topics for the synthetic community. Such relevance is given by their reactive aspects explored in the context of organic synthesis and by the direct application of these compounds as pharmaceuticals and useful materials, and their key roles in biological structures. A simple and straightforward strategy for the amide moiety installation is the use of carbamoyl radicals - this nucleophilic one-electron intermediate is prone to undergo a series of transformations, providing a range of structurally relevant derivatives. In this review, we summarize the latest advances in the field from the perspective of photoinduced protocols. To this end, their synthetic applications are organized accordingly to the nature of the radical precursor (formamides through HAT, 4-substituted-1,4-dihydropyridines, oxamic acids, and N-hydroxyphthalimido esters), the mechanistic aspects also being highlighted. The discussion also includes a recent approach proceeding via photolytic C-S cleavage of dithiocarbamate-carbamoyl intermediates. By exploring fundamental concepts, this material aims to offer an understanding of the topic, which will encourage and facilitate the design of new synthetic strategies applying the carbamoyl radical.

1,3,2-Diazaphospholene-Catalyzed Reductive Cyclizations of Organohalides

1,3,2-diazaphospholenes hydrides (DAP-Hs) are highly nucleophilic organic hydrides serving as main-group catalysts for a range of attractive transformations. DAP hydrides can act as stoichiometric hydrogen atom transfer agents in radical reactions. Herein, we report a DAP-catalyzed reductive radical cyclization of a broad range of aryl and alkyl halides under mild conditions. The pivotal DAP catalyst turnover was achieved by a DBU-assisted σ-bond metathesis between the formed DAP halide and HBpin, which rapidly regenerates DAP-H. The transformation is significantly accelerated by irradiation with visible light. Mechanistic investigations indicate that visible light irradiation leads to the formation of DAP dimers, which are in equilibrium with DAP radicals and accelerate the cyclization. The direct use of (DAP)2 enabled a catalytic protocol in the absence of light.

Photochemical organocatalytic enantioselective radical γ-functionalization of α-branched enals

Reported herein is a rare example of asymmetric catalytic functionalisation of enals at the remote γ-position, proceeding via a radical path. The process requires visible light and exploits the synergistic actions of two distinct organocatalysts. A nucleophilic organic catalyst generates radicals upon S_N2-based activation of commercially available alkyl halides and blue light irradiation. Concomitantly, a chiral secondary amine catalyst triggers the formation of a dienamine from α-branched enals. This chiral dienamine intercepts the photogenerated radicals with excellent γ-selectivity and good stereocontrol.

Photocatalytic C(sp3) radical generation via C-H, C-C, and C-X bond cleavage

C(sp³) radicals (R˙) are of broad research interest and synthetic utility. This review collects some of the most recent advancements in photocatalytic R˙ generation and highlights representative examples in this field. Based on the key bond cleavages that generate R˙, these contributions are divided into C–H, C–C, and C–X bond cleavages. A general mechanistic scenario and key R˙-forming steps are presented and discussed in each section.

C(sp³) radicals (R˙) are of broad research interest and synthetic utility.

Highly Effective Photocatalytic Radical Reactions Triggered by a Photoactive Metal-Organic Framework

On account of their inherent reactive properties, radical reactions play an important role in organic syntheses. The booming photochemistry provides a feasible approach to trigger the generation of radical intermediates in organic reaction processes. Thus, developing effective photocatalysts becomes the key step in radical reactions. In this work, the triphenylamine moiety with photoactivity is successfully embedded in a highly porous and stable metal-organic framework (MOF), and the obtained MOF, namely, Zr-TCA, naturally displays a photoactive property derived from the triphenylamine-based ligand. In photocatalytic studies, the triphenylamine-based Zr-TCA not only exhibits a high catalytic activity on the aerobic oxidation of sulfides via the generation of the superoxide radical anion (O2•-) under light irradiation but also shows good efficiency in the trifluoromethylation of arenes and heteroarenes by the formation of the trifluoromethyl radical (CF3•) as an intermediate. Moreover, the high performance of Zr-TCA can be well maintained over a wide range of substrates in these radical reactions, and the recycled Zr-TCA still retains its excellent photocatalytic activity. The high recyclability and catalytic efficiency to various substrates make the constructed triphenylamine-based Zr-TCA a promising photocatalyst in diverse radical reactions.

Reduced Molecular Flavins as Single-Electron Reductants after Photoexcitation

Flavoenzymes mediate a multitude of chemical reactions and are catalytically active both in different oxidation states and in covalent adducts with reagents. The transfer of such reactivity to the organic laboratory using simplified molecular flavins is highly desirable, and such applications in (photo)oxidation reactions are already established. However, molecular flavins have not been used for the reduction of organic substrates yet, although this activity is known and well-studied for DNA photolyase enzymes. We report a catalytic method using reduced molecular flavins as photoreductants and γ-terpinene as a sacrificial reductant. Additionally, we present our design for air-stable, reduced flavin catalysts, which is based on a conformational bias strategy and circumvents the otherwise rapid reduction of O₂ from air. Using our catalytic strategy, we were able to replace superstoichiometric amounts of the rare-earth reductant SmI₂ in a 5-exo-trig cyclization of substituted barbituric acid derivatives. Such flavin-catalyzed reductions are anticipated to be beneficial for other transformations as well and their straightforward synthesis indicates future use in stereo- as well as site-selective transformations.