Unextractable fossil fuels in a 1.5 °C world

Theoretical study of the structural and thermodynamic properties of U-He compounds under high pressure

Uranium is considered as a very important nuclear energy material because of the huge amount of energy it releases. As the main product of the spontaneous decay of uranium, it is difficult for helium to react with uranium because of its chemical inertness. Therefore, bubbles will be formed inside uranium, which could greatly reduce the performance of uranium or cause safety problems. Additionally, nuclear materials are usually operated in an environment of high-temperature and high-pressure, so it is necessary to figure out the exact state of helium inside uranium under extreme conditions. Here, we explored the structural stability of the U-He system under high pressure and high temperature by using density functional theory calculations. Two metastable phases are found between 50 and 400 GPa: U4He with space group Fmmm and U6He with space group P1̄. Both are metallic and adopt layered structures. Electron localization function calculation combined with charge density difference analysis indicates that there are covalent bonds between U and U atoms in both Fmmm-U4He and P1̄-U6He. Regarding the elastic modulus of α-U, the addition of helium has certain influence on the mechanical properties of uranium. Besides, first-principles molecular dynamics simulations were carried out to study the dynamical behavior of Fmmm-U4He and P1̄-U6He at high-temperature. It was found that Fmmm-U4He and P1̄-U6He undergo one-dimensional superionic phase transitions at 150 GPa. Our study revealed the exotic structure of U-He compounds beyond the formation of bubbles under high-pressure and high-temperature, which might be relevant to the performance and safety issues of nuclear materials under extreme conditions.

Solar-Driven Sustainability: III-V Semiconductor for Green Energy Production Technologies

Long-term societal prosperity depends on addressing the world's energy and environmental problems, and photocatalysis has emerged as a viable remedy. Improving the efficiency of photocatalytic processes is fundamentally achieved by optimizing the effective utilization of solar energy and enhancing the efficient separation of photogenerated charges. It has been demonstrated that the fabrication of III-V semiconductor-based photocatalysts is effective in increasing solar light absorption, long-term stability, large-scale production and promoting charge transfer. This focused review explores on the current developments in III-V semiconductor materials for solar-powered photocatalytic systems. The review explores on various subjects, including the advancement of III-V semiconductors, photocatalytic mechanisms, and their uses in H2 conversion, CO2 reduction, environmental remediation, and photocatalytic oxidation and reduction reactions. In order to design heterostructures, the review delves into basic concepts including solar light absorption and effective charge separation. It also highlights significant advancements in green energy systems for water splitting, emphasizing the significance of establishing eco-friendly systems for CO2 reduction and hydrogen production. The main purpose is to produce hydrogen through sustainable and ecologically friendly energy conversion. The review intends to foster the development of greener and more sustainable energy source by encouraging researchers and developers to focus on practical applications and advancements in solar-powered photocatalysis.

Recent developments on sustainable biobutanol production: a novel integrative review

Renewable and sustainable biofuel production, such as biobutanol, is becoming increasingly popular as a substitute for non-renewable and depleted petrol fuel. Many researchers have studied how to produce butanol cheaply by considering appropriate feedstock materials and bioprocess technologies. The production of biobutanol through acetone-butanol-ethanol (ABE) is highly sought after around the world because of its sustainable supply and lack of competition with food. The purpose of this study is to present the current biobutanol production research and to analyse the biobutanol research conducted during 2006 to 2023. The keyword used in this study is "Biobutanol," and the relevant data was extracted from the Web of Science database (WoS). According to the results, institutions and scholars from the People's Republic of China, the USA, and India have the highest number of cited papers across a broad spectrum of topics including acetone-butanol-ethanol (ABE) fermentation, biobutanol, various pretreatment techniques, and pervaporation. The success of biobutanol fermentation from biomass depends on the ability of the fermentation operation to match the microbial behaviour along with the appropriate bioprocessing strategies to improve the entire process to be suitable for industrial scale. Based on the review data, we will look at the biobutanol technologies and appropriate strategies that have been developed to improve biobutanol production from renewable biomass.

Electrocatalysis in deep eutectic solvents: from fundamental properties to applications

Electrocatalysis stands out as a promising avenue for synthesizing high-value products with minimal environmental footprint, aligning with the imperative for sustainable energy solutions. Deep eutectic solvents (DESs), renowned for their eco-friendly, safe, and cost-effective nature, present myriad advantages, including extensive opportunities for material innovation and utilization as reaction media in electrocatalysis. This review initiates with an exposition on the distinctive features of DESs, progressing to explore their applications as solvents in electrocatalyst synthesis and electrocatalysis. Additionally, it offers an insightful analysis of the challenges and prospects inherent in electrocatalysis within DESs. By delving into these aspects comprehensively, this review aims to furnish a nuanced understanding of DESs, thus broadening their horizons in the realm of electrocatalysis and facilitating their expanded application.

Amorphous Engineering of Scalable Metal-Organic Framework-Derived Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

The engineering of amorphous metal-organic frameworks (MOFs) offers potential opportunities for the construction of electrocatalysts for efficient oxygen evolution reaction (OER). Herein, highly efficient OER performance and durability in alkaline electrolyte are discovered for MOF-derived amorphous and porous electrocatalysts, which are synthesized in a brief procedure and can be facilely produced in scalable quantities. The structural inheritance of MOF amorphous catalysts is significant for the retention of catalytic sites and the diffusion of electrolytes, and the presence of Fe sites can change the electronic structure and effectively control the adsorption behavior of important intermediates, accelerating reaction kinetics. The obtained amorphous A-FeNi can be transformed from FeNi-MOF effortlessly and instantly, and it only needs low overpotentials of 152 and 232 mV at 10 and 100 mA cm-2 with a Tafel slope of 17 mV dec-1 in 1 m KOH for OER. Moreover, A-FeNi possesses high corrosion resistance and durability, therefore A-FeNi can work continually for at least 400 h at 100 mA cm-2. This work may pave a new avenue for the design of MOFs-related amorphous electrocatalyst.

Shared insights for heat health risk adaptation in metropolitan areas of developing countries

Global warming has led to a surge in heat health risks (HHRs), the impacts of which are particularly pronounced in metropolitan areas of developing countries. In the current study, six metropolitan areas - Beijing, China; Cairo, Egypt; Jakarta, Indonesia; Mumbai, India; Rio de Janeiro, Brazil; and Tehran, Iran - were selected as the study area to further differentiate the built-up landscapes by utilizing the concept of local climate zones. Moreover, we assessed the similarities and differences in HHR associated with the landscape. Results revealed a 30.67% higher HHR in compact built-up landscapes than in the open built-up type. Urban green spaces played an effective but differentiated role in mitigating HHR. That is, low vegetation in urbanized areas and trees in suburban areas significantly mitigated HHR. Collectively, our findings emphasize the role of effective planning and management in addressing HHR and provide empirical support for implementing HHR mitigation and adaptation strategies.

Directional molecular transport in iron redox flow batteries by interfacial electrostatic forces

The mounting global energy demand urges surplus electricity generation. Due to dwindling fossil resources and environmental concerns, shifting from carbon-based fuels to renewables is vital. Though renewables are affordable, their intermittent nature poses supply challenges. In these contexts, aqueous flow batteries (AFBs), are a viable energy storage solution. This study tackles AFBs' energy density and efficiency challenges. Conventional strategies focus on altering molecule's solubility but overlook interface's transport kinetics. We show that triggering electrostatic forces at the interface can significantly enhance the mass transport kinetics of redox active molecules by introducing a powerful electrostatic flux over the diffusional flux, thereby exerting a precise directionality on the molecular transport. This approach of controlling the directionality of molecular flux in an all iron redox flow battery amplifies the current and power rating with approximately 140 % enhancement in the energy density.

Synergistic effect of dual phase cocatalysts: MoC-Mo2C quantum dots anchored on g-C3N4 for high-stability photocatalytic hydrogen evolution

The extensive examination of hexagonal molybdenum carbide (β-Mo2C) as a non-noble cocatalyst in the realm of photocatalytic H2 evolution is predominantly motivated by its exceptional capacity to adsorb H+ ions akin to Pt and its advantageous conductivity characteristics. However, the H2 evolution rate of photocatalysts modified with β-Mo2C is limited as a result of their comparatively low ability to release H through desorption. Therefore, a facile method was employed to synthesize carbon intercalated dual phase molybdenum carbide (MC@C) quantum dots (ca. 3.13 nm) containing both α-MoC and β-Mo2C decorated on g-C3N4 (gCN). The synthesis process involved a simple and efficient combination of sonication-assisted self-assembly and calcination techniques. 3-MC@C/gCN exhibited the highest efficiency in generating H2, with a rate of 4078 µmol g-1h-1 under 4 h simulated sunlight irradiation, which is 13 times higher than pristine gCN. Furthermore, from the cycle test, 3-MC@C/gCN showcased exceptional photochemical stability of 65 h, as it maintained a H2 evolution rate of 40 mmol g-1h-1. The heightened level of activity observed in the 3-MC@C/gCN system can be ascribed to the synergistic effects of MoC-Mo2C that arise due to the existence of a carbon layer. The presence of a carbon layer enhanced the transmission of photoinduced electrons, while the MoC-Mo2C@C composite served as active sites, thereby facilitating the H2 production reaction of gCN. The present study introduces a potentially paradigm-shifting concept pertaining to the exploration of novel Mo-based cocatalysts with the aim of augmenting the efficacy of photocatalytic H2 production.

Interaction Effects between the Main Components of Protein-Rich Biomass during Microwave-Assisted Pyrolysis

The interaction effects between the main components (proteins (P), carbohydrates (C), and lipids (L)) of protein-rich biomass during microwave-assisted pyrolysis were investigated in depth with an exploration of individual pyrolysis and copyrolysis (PC, PL, and CL) of model compounds. The average heating rate of P was higher than those of C and L, and the interactions in all copyrolysis groups reduced the max instant heating rate. The synergistic extent (S) of PC and PL for bio-oil yield was 16.78 and 18.24%, respectively, indicating that the interactions promoted the production of bio-oil. Besides, all of the copyrolysis groups exhibited a synergistic effect on biochar production (S = 19.43-28.24%), while inhibiting the gas generation, with S ranging from -20.17 to -6.09%. Regarding the gaseous products, apart from H2, P, C, and L primarily generated CO2, CO, and CH4, respectively. Regarding bio-oil composition, the interactions occurring within PC, PL, and CL exhibited a significantly synergistic effect (S = 47.81-412.96%) on the formation of N-heterocyclics/amides, amides/nitriles, and acids/esters, respectively. Finally, the favorable applicability of the proposed interaction effects was verified with microalgae. This study offers valuable insights for understanding the microwave-assisted pyrolysis of protein-rich biomass, laying the groundwork for further research and process optimization.

Unveiling the Mystery of LiF within Solid Electrolyte Interphase in Lithium Batteries

Over the past decades, significant advances have been made in lithium-ion batteries. However, further requirement on the electrochemical performance is still a powerful motivator to improve battery technology. The solid electrolyte interphase (SEI) is considered as a key component on negative electrode, having been proven to be crucial for the performance, even in safety of batteries. Although numerous studies have focused on SEI in recent years, its specific properties, including structure and composition, remain largely unclear. Particularly, LiF, a common and important component in SEI, has sparked debates among researchers, resulting in divergent viewpoints. In this review, the recent research findings on SEI and delve into the characteristics of the LiF component is aim to consolidated. The cause of SEI formation and the evolution of SEI models is summarized. The distinctive properties of SEI generated on various negative electrodes is further discussed, the ongoing scholarly controversy surrounding the function of LiF within SEI, and the specific physicochemical properties about LiF and its synergistic effect in heterogeneous components. The objective is to facilitate better understanding of SEI and the role of the LiF component, ultimately contributing to the development of Li batteries with enhanced electrochemical performance and safety for battery communities.

An Enzymatic and Proteomic Analysis of Panus lecomtei during Biodegradation of Gossypol in Cottonseed

Cotton is an important plant-based protein. Cottonseed cake, a byproduct of the biodiesel industry, offers potential in animal supplementation, although the presence of the antinutritional sesquiterpenoid gossypol limits utilization. The macrofungus Panus lecomtei offers potential in detoxification of antinutritional factors. Through an enzymatic and proteomic analysis of P. lecomtei strain BRM044603, grown on crushed whole cottonseed contrasting in the presence of free gossypol (FG), this study investigated FG biodegradation over a 15-day cultivation period. Fungal growth reduced FG to levels at 100 μg/g, with a complex adaptive response observed, involving primary metabolism and activation of oxidative enzymes for metabolism of xenobiotics. Increasing activity of secreted laccases correlated with a reduction in FG, with enzyme fractions degrading synthetic gossypol to trace levels. A total of 143 and 49 differentially abundant proteins were observed across the two contrasting growth conditions after 6 and 12 days of cultivation, respectively, revealing a dynamic protein profile during FG degradation, initially related to constitutive metabolism, then later associated with responses to oxidative stress. The findings advance our understanding of the mechanisms involved in gossypol degradation and highlight the potential of P. lecomtei BRM044603 in cotton waste biotreatment, relevant for animal supplementation, sustainable resource utilization, and bioremediation.

Ultrastable halide perovskite CsPbBr3 photoanodes achieved with electrocatalytic glassy-carbon and boron-doped diamond sheets

Halide perovskites exhibit exceptional optoelectronic properties for photoelectrochemical production of solar fuels and chemicals but their instability in aqueous electrolytes hampers their application. Here we present ultrastable perovskite CsPbBr3-based photoanodes achieved with both multifunctional glassy carbon and boron-doped diamond sheets coated with Ni nanopyramids and NiFeOOH. These perovskite photoanodes achieve record operational stability in aqueous electrolytes, preserving 95% of their initial photocurrent density for 168 h of continuous operation with the glassy carbon sheets and 97% for 210 h with the boron-doped diamond sheets, due to the excellent mechanical and chemical stability of glassy carbon, boron-doped diamond, and nickel metal. Moreover, these photoanodes reach a low water-oxidation onset potential close to +0.4 VRHE and photocurrent densities close to 8 mA cm-2 at 1.23 VRHE, owing to the high conductivity of glassy carbon and boron-doped diamond and the catalytic activity of NiFeOOH. The applied catalytic, protective sheets employ only earth-abundant elements and straightforward fabrication methods, engineering a solution for the success of halide perovskites in stable photoelectrochemical cells.

Immobilized microalgae: principles, processes and its applications in wastewater treatment

Microalgae have emerged as potential candidates for biomass production and pollutant removal. However, expensive biomass harvesting, insufficient biomass productivity, and low energy intensity limit the large-scale production of microalgae. To break through these bottlenecks, a novel technology of immobilized microalgae culture coupled with wastewater treatment has received increasing attention in recent years. In this review, the characteristics of two immobilized microalgae culture technologies are first presented and then their mechanisms are discussed in terms of biofilm formation theories, including thermodynamic theory, Derjaguin-Landau-Verwei-Overbeek theory (DLVO) and its extended theory (xDLVO), as well as ionic cross-linking mechanisms in the process of microalgae encapsulated in alginate. The main factors (algal strains, carriers, and culture conditions) affecting the growth of microalgae are also discussed. It is also summarized that immobilized microalgae show considerable potential for nitrogen and phosphorus removal, heavy metal removal, pesticide and antibiotic removal in wastewater treatment. The role of bacteria in the cultivation of microalgae by immobilization techniques and their application in wastewater treatment are clarified. This is economically feasible and technically superior. The problems and challenges faced by immobilized microalgae are finally presented.

Pension funds and fossil fuel phase-out: historical developments and limitations of pension climate strategies

Despite the decades of international climate negotiations and several landmark agreements, global efforts to date to restrict fossil fuel production in line with climate targets have been unsuccessful. As national and international policies continue to fall short of phasing out fossil fuels, increasing attention has been paid to non-state actors, like pension funds, as a potential source of more ambitious climate action. As major asset owners, large shareholders in fossil fuel companies, and historically activist investors, pension funds are theoretically well-placed to contribute to phasing out fossil fuels. Despite growing recognition of this potential role for pension funds and other major investors in climate change mitigation, there has been little attention to pension funds' historical record on climate change, or to how their climate strategies have developed and changed over time. This paper examines how the climate strategies of the largest US and European pension funds have evolved in relation to key developments in international climate agreements and the extent to which these strategies contribute to restricting fossil fuel supply. Through an analysis of the annual, governance, and sustainability reports of 6 pension funds from 1997 to 2022, we examine the strategies pension funds have adopted to address both climate change and fossil fuels. Pension funds have demonstrated responsiveness to the signals of international climate agreements, adopting a range of strategies with respect to climate change (amongst others, integrating ESG principles, increasing their sustainable investments, and setting net zero goals). Their explicit attention to fossil fuels and contribution to supply-side interventions take the form of systematic shareholder engagement, (selective) divestment, and lobbying policymakers. While pension fund climate action is growing , the ambition of their strategies is not aligned with a rapid fossil fuel phaseout; their efforts are often focussed on improving disclosure and transparency and demonstrate complacency with minimal improvements from fossil fuel companies. If pension funds are to significantly contribute to phasing out fossil fuels, redefining pension fund responsibilities and the traditional shareholder role will likely be required.

The atlas of unburnable oil for supply-side climate policies

To limit the increase in global mean temperature to 1.5 °C, CO2 emissions must be drastically reduced. Accordingly, approximately 97%, 81%, and 71% of existing coal and conventional gas and oil resources, respectively, need to remain unburned. This article develops an integrated spatial assessment model based on estimates and locations of conventional oil resources and socio-environmental criteria to construct a global atlas of unburnable oil. The results show that biodiversity hotspots, richness centres of endemic species, natural protected areas, urban areas, and the territories of Indigenous Peoples in voluntary isolation coincide with 609 gigabarrels (Gbbl) of conventional oil resources. Since 1524 Gbbl of conventional oil resources are required to be left untapped in order to keep global warming under 1.5 °C, all of the above-mentioned socio-environmentally sensitive areas can be kept entirely off-limits to oil extraction. The model provides spatial guidelines to select unburnable fossil fuels resources while enhancing collateral socio-environmental benefits.

Machine Learning-Based Interfacial Tension Equations for (H2 + CO2)-Water/Brine Systems over a Wide Range of Temperature and Pressure

Large-scale underground hydrogen storage (UHS) plays a vital role in energy transition. H2-brine interfacial tension (IFT) is a crucial parameter in structural trapping in underground geological locations and gas-water two-phase flow in subsurface porous media. On the other hand, cushion gas, such as CO2, is often co-injected with H2 to retain reservoir pressure. Therefore, it is imperative to accurately predict the (H2 + CO2)-water/brine IFT under UHS conditions. While there have been a number of experimental measurements on H2-water/brine and (H2 + CO2)-water/brine IFT, an accurate and efficient (H2 + CO2)-water/brine IFT model under UHS conditions is still lacking. In this work, we use molecular dynamics (MD) simulations to generate an extensive (H2 + CO2)-water/brine IFT databank (840 data points) over a wide range of temperature (from 298 to 373 K), pressure (from 50 to 400 bar), gas composition, and brine salinity (up to 3.15 mol/kg) for typical UHS conditions, which is used to develop an accurate and efficient machine learning (ML)-based IFT equation. Our ML-based IFT equation is validated by comparing to available experimental data and other IFT equations for various systems (H2-brine/water, CO2-brine/water, and (H2 + CO2)-brine/water), rendering generally good performance (with R2 = 0.902 against 601 experimental data points). The developed ML-based IFT equation can be readily applied and implemented in reservoir simulations and other UHS applications.

Enhanced uranium extraction from seawater: from the viewpoint of kinetics and thermodynamics

Uranium extraction from seawater (UES) is recognized as one of the seven pivotal chemical separations with the potential to revolutionize global paradigms. The forthcoming decade is anticipated to witness a surge in UES, driven by escalating energy demands. The oceanic reservoirs, possessing uranium quantities approximately 1000-fold higher than terrestrial mines, present a more sustainable and environmentally benign alternative. Empirical evidence from historical research indicates that adsorption emerges as the most efficacious process for uranium recovery from seawater, considering operational feasibility, cost-effectiveness, and selectivity. Over the years, scientific exploration has led to the development of a plethora of adsorbents with superior adsorption capacity. It would be efficient to design materials with a deep understanding of the adsorption from the perspective of kinetics and thermodynamics. Here, we summarize recent advancements in UES technology and the contemporary challenges encountered in this domain. Furthermore, we present our perspectives on the future trajectory of UES and finally offer our insights into this subject.

Core-shell engineered g-C3N4@ NaNbO3for enhancing photocatalytic reduction of CO2

Photocatalytic reduction of carbon dioxide is a technology that effectively utilizes CO2and solar energy. Sodium niobate (NaNbO3) has received much attention in the field of photocatalysis due to its excellent photocatalytic properties. However, the application of NaNbO3in the field of photocatalysis is still limited by poor reaction to visible light and easy recombination of photo-generated carriers. Heterojunction with g-C3N4to construct core-shell structure can effectively improve the above problems. Combining the two can design a core-shell composite material that is beneficial for photocatalytic reduction of CO2. Herein, we prepared a core-shell heterojunction g-C3N4/NaNbO3by uniformly impregnating urea on the surface of NaNbO3chromium nanofibers with NaNbO3nanofibers prepared by electrospinning as a catalyst carrier, and urea as a precursor of g-C3N4. The core-shell structure of g-C3N4/NaNbO3was verified by a series of characterization methods such as XPS, XRD, and TEM. It was found that under the same conditions, the methanol yield of core-shell g-C3N4/NaNbO3was 12.86μmol·g-1·h-1, which is twice that of pure NaNbO3(6.67μmol·g-1·h-1). This article highlights an impregnation method to build core-shell structures for improved photocatalytic reduction of CO2.

Impact of different geopolitical factors on the energy transition: The role of geopolitical threats, geopolitical acts, and geopolitical risks

In order to better understand the impact of different geopolitical factors on energy transition, the impact of geopolitical threats (war threats, peace threats, military buildups, nuclear threats and terror threats), geopolitical acts (beginning of war, escalation of war and terror acts), and geopolitical risks on energy transition were systematically investigated. Green technologies, natural resource rents and trade openness were incorporated into the analytical framework, and a dynamic panel threshold model was utilized to explore the impact of geopolitical risks on energy transition across different income levels. To this end, data on geopolitical threats, geopolitical acts, geopolitical risks, energy transitions and other key social economic factors for 38 countries from 2000 to 2022 were collected. The heterogeneity simulation results show that there is a negative correlation between geopolitical threats, geopolitical acts, geopolitical risks and energy transition. Moreover, geopolitical threats have more significant hindrance to the energy transition than geopolitical acts. The results of the nonlinear panel simulation show that there is a double threshold effect of geopolitical risks on energy transition. When geopolitical risk crosses the threshold (0.5197), the coefficient decreases to -0.29, which means that the rising geopolitical risk increases the inhibition on energy transition, and the inhibitory effect is slightly weakened after a certain level. Finally, policy implications are offered.

Use of evidence and expertise in UK climate governance: the case of the Cumbrian Coal Mine

There is an overall scientific consensus that no new coal mines can be developed, if the Paris Agreement to limit global temperature rises is to be met. Yet in December 2022, following a lengthy Public Inquiry, the UK Government approved the development of Woodhouse Colliery in Cumbria. In doing so, it accepted the claim that the coal mine would be 'zero carbon' and could even result in lower global emissions overall. As this paper demonstrates, there is no independent evidence to support these claims, whilst a large body of independent evidence comes to the opposite conclusion. This paper uses the example of Woodhouse Colliery to examine the use of evidence and expertise in climate governance processes. It finds that the nature of expertise and evidence is not properly considered, and that there is ambiguity and confusion surrounding the implementation of the UK's climate legislation, particularly the Climate Change Act. It also finds that the ways in which the decision-making process solicited and assessed evidence was flawed, promoting a 'false balance'. This ambiguity and false balance provide scope for developers to argue the case for destructive developments, even while claiming adherence to climate ambitions. The paper concludes by suggesting reforms to governance processes, to provide a more transparent and credible implementation of policies to achieve the UK's net zero target. Suggested reforms include clearer rules governing fossil fuel phase-out; greater transparency and better handling of conflicts of interest in decision-making; and devolution of climate responsibilities to local areas.

Integrated CO2 capture and conversion via H2-driven CO2 biomethanation: Cyclic performance and microbial community response

This study investigated the use of H2-driven CO2 biomethanation for integrated CO2 capture and conversion (iCCC). Anaerobic chambers containing Na2CO3-amended microbial growth medium provided with H2 were inoculated with anaerobic granular sludge. Microorganisms were enriched that could regenerate carbonate by using the bicarbonate formed from CO2 absorption to generate methane. Multiple absorption-regeneration cycles were performed and effective restoration of CO2 absorption capacity and stable carbonate recycling via CO2 biomethanation were observed for CO2 absorbents adjusted to three different pH values (9.0, 9.5, and 10.0). The pH = 10.0 group had the highest CO2 absorption capacity; 65.3 mmol/L in the 5th cycle. A slight alkaline inhibition of acetoclastic methanogenesis occurred near the end of regeneration, but had limited impact on the cyclic performance of the iCCC process. Microbial communities were dominated by H2-utilizing and alkali-tolerant species that could participate in CO2 biomethanation and survive under alternating neutral and alkaline conditions.

Near-Infrared Light-Driven Photocatalysis with an Emphasis on Two-Photon Excitation: Concepts, Materials, and Applications

Efficient utilization of sunlight in photocatalysis is widely recognized as a promising solution for addressing the growing energy demand and environmental issues resulting from fossil fuel consumption. Recently, there have been significant developments in various near-infrared (NIR) light-harvesting systems for artificial photosynthesis and photocatalytic environmental remediation. This review provides an overview of the most recent advancements in the utilization of NIR light through the creation of novel nanostructured materials and molecular photosensitizers, as well as modulating strategies to enhance the photocatalytic processes. A special focus is given to the emerging two-photon excitation NIR photocatalysis. The unique features and limitations of different systems are critically evaluated. In particular, it highlights the advantages of utilizing NIR light and two-photon excitation compared to UV-visible irradiation and one-photon excitation. Ongoing challenges and potential solutions for the future exploration of NIR light-responsive materials are also discussed.

Integrating PV-based energy production utilizing the existing infrastructure of MRT-6 at Dhaka, Bangladesh

In a very dense urban landscape, incorporating renewables becomes challenging due to a lack of space, planning, and mindset. Utilization of already existing large infrastructures in combination with existing technology and necessary adaptation can create the right synergy for harnessing renewables like solar. This paper proposes the installation of a solar power plant in Dhaka, Bangladesh, using available space on Metro Rail Line 6 to meet the increasing demand for clean and renewable energy. The proposed system involves the selection of suitable space, and PV panels, the calculation of annual electricity generation, and performing financial and environmental analyses. The proposed on-grid/grid-tied system offers the advantage of reducing dependence on power supplied to the grid, resulting in lower energy costs, and promoting the use of green energy. The system has a payback period of 7.7 years and a return on investment of 45.7 %. It is estimated that the system saves 14,053.203 tons of CO2 emissions per year and 281,064.06 tons of CO2 emissions over its lifetime. Also, the grid life cycle emission is 584 gCO2/kWh, and the system life cycle emission is 39,119.4 tCO2, which further proves that it is a feasible solution to meeting energy demands while reducing the dependency on fossil fuels and promoting sustainable energy utilization. The results of simulations run using PVsyst and HOMER confirm the economic viability of the proposed solar power station, supporting its viability. The levelized energy cost (LCOE), as projected by PVsyst, is $0.09 per kWh, nearly matching HOMER's prediction of $0.0835. This convergence of results from several simulation tools supports the solar power plant's predicted cost-effectiveness, demonstrating its potential as a key player in the effort to create a greener and more affordable energy landscape.

Reactivity and Dissolution Characteristics of Naturally Altered Basalt in CO2-Rich Brine: Implications for CO2 Mineralization

Hydrothermally altered basaltic rocks are widely distributed and more accessible than fresh basaltic rocks, making them attractive feedstocks for permanent CO2 storage through mineralization. This study investigates the reactivity and dissolution behaviors of altered basalt during the reaction with CO2-rich fluids and compares it with unaltered basalt through batch hydrothermal experiments using a brine that simulates reservoir conditions with 5 MPa CO2 gas at 100 °C. When using basalt powders to evaluate reactivity, results show that although the leaching rates of elements (Mg, Al, Si, K, and Fe) from altered basalt were generally an order of magnitude lower than those from unaltered basalt in a CO2-saturated acidic environment, similar elemental leaching behavior was observed for the two basalt samples, with Ca and Mg having the highest leaching rates. However, in a more realistic environment simulated by block experiments, different leaching behaviors were observed. When the CO2-rich fluid reacts with altered basalt, rapid and preferential dissolution of smectite occurs, providing a significant amount of Mg to the solution, while Ca dissolution lags. This implies that when altered basalt is utilized for CO2 mineralization, the carbonation step may differ from that of fresh basalt, with predominant Mg carbonation followed by Ca carbonation. This rapid dissolution of Mg suggests that altered basalt is a promising feedstock for CO2 mineralization. This study provides theoretical support for developing technologies to utilize altered basalt for carbon storage.

Emerging trends in research and development on earth abundant materials for ammonia degradation coupled with H2 generation

Ammonia, as an essential and economical fuel, is a key intermediate for the production of innumerable nitrogen-based compounds. Such compounds have found vast applications in the agricultural world, biological world (amino acids, proteins, and DNA), and various other chemical transformations. However, unlike other compounds, the decomposition of ammonia is widely recognized as an important step towards a safe and sustainable environment. Ammonia has been popularly recommended as a viable candidate for chemical storage because of its high hydrogen content. Although ruthenium (Ru) is considered an excellent catalyst for ammonia oxidation; however, its high cost and low abundance demand the utilization of cheaper, robust, and earth abundant catalyst. The present review article underlines the various ammonia decomposition methods with emphasis on the use of non-noble metals, such as iron, nickel, cobalt, molybdenum, and several other carbides as well as nitride species. In this review, we have highlighted various advances in ammonia decomposition catalysts. The major challenges that persist in designing such catalysts and the future developments in the production of efficient materials for ammonia decomposition are also discussed.

Dormancy and double-activation strategy for construction of high-performance mixed-matrix membranes

Mixed-matrix membranes (MMMs) have the potential for energy-efficient gas separation by matching the superior mass transfer and anti-plasticization properties of the fillers with processability and scaling up features of the polymers. However, construction of high-performance MMMs has been prohibited due to low filler-loading and the existence of interfacial defects. Here, high MOF-loaded, i.e., 55 wt %, MMMs are developed by a 'dormancy and double-activation' (DDA) strategy. High MOF precursor concentration suppresses crystallization in the membrane casting solution, realizing molecular level mixing of all components. Then, the polymeric matrix was formed with uniform encapsulation of MOF nutrients. Subsequently, double-activation was employed to induce MOF crystallization: the alkali promotes MOFs nucleation to harvest small porous nanocrystals while excessive ligands activate the metal ions to enhance the MOFs conversion. As such, quasi-semi-continuous mass transfer channels can be formed in the MMMs by the connected MOFs nanocrystals to boost the gas permeability. The optimized MMM shows significantly ameliorated CO2 permeability, i.e., 2841 Barrer, five-fold enhancement compared with pristine polymer membrane, with a good CO2 /N2 selectivity of 36. Besides, the nanosized MOFs intensify their interaction with polymer chains, endowing the MMMs with good anti-plasticization behaviour and stability, which advances practical application of MMMs in carbon capture.

Environmental impact assessment of a combined bioprocess for hydrogen production from food waste

With the growth of population and the development of economy, the food waste (FW) and energy shortage issues are getting great attentions. In this study, the environmental performance of a biorefinery of enzymatic hydrolysis and fermentation for hydrogen production from FW (FW-H2) was investigated by life cycle assessment (LCA) in terms of greenhouse gas (GHG) emissions and non-renewable energy use (NREU). It was found that the gas compression, electricity and FW transport were the major environmental hotspots in the FW-H2 process. The GHG emissions of 10.1 kg CO2 eq and NREU of 104 MJ were obtained from per kg hydrogen production through the whole process. The environmental impacts of the FW-H2 process were lower than the conventional processes for hydrogen production, such as steam methane reforming and electrolysis with grid. Sensitivity analysis demonstrated that the efforts in environmental hotspots, especially in gas compression, could result in the improvement of environmental impacts of the FW-H2 process. The GHG emissions and NREU could reduce to 89.2 % and 89.4 % with a 20 % reduction of energy consumption for gas compression. Different allocation methods (economic allocation, mass allocation, no allocation and system expansion method) applied for LCA analysis could provide a significant influence of environmental impacts in the FW-H2 process. The results obtained from this study could lead to further research into resource recycling from waste and would ultimately contribute to the development of circular economy.

Redox-Functionalized Semiconductor Interfaces for Photoelectrochemical Separations

Redox-mediated electrosorption is a promising platform for selective electrochemical (EC) separations, due to its molecular selectivity, high uptake, and tunability for target ions. However, the electrical energy required is mainly generated by non-renewable energy sources, which limits its sustainability and overall impact to decarbonization. Here, a redox-mediated photoelectrochemical (PEC) separation process using polyvinyl ferrocene functionalized TiO2 nanorod electrodes is proposed, which integrates direct solar energy as a driver for the selective electrosorption. The photoelectrochemically-driven oxidation and reduction with both homogeneous and heterogeneous ferrocene-systems is investigated to establish the underlying mechanism. The PEC system can separate heavy metal oxyanions at lower voltages or even without electrical energy. At 0.3 V versus SCE, a 124 mg g-1 uptake for Mo is achieved, which is comparable to the performance of EC cells at 0.75 V versus SCE. Thus, PEC systems not only can generate energy for spontaneous redox-separations, but also can reduce electrical energy consumption by 51.4% compared to EC cells for separation processes when coupled with an external electrical energy.

Modeling the city-level synergistic effect of low-carbon economic development in China's Yangtze River Delta

The development of a low-carbon economy has been the focus of attention from all walks of life in recent years. Using data from 41 cities in the Yangtze River Delta (YRD) from 2005 to 2019, this study constructed a low-carbon economic development coupling and coordination degree model and indicator system to measure the synergistic effect. Starting from the resource, economy, society, and innovation system, it was found that the coupling degree of low-carbon economic development in the YRD region has increased steadily. Generally, it is in a running-in period, and the improvement rate shows a high trend in the west and a low trend in the east. Also, the YRD is in a moderate incoordination stage, but the synergy effect has improved. Among these cities, Shanghai and Hangzhou had higher synergy efficiency in 2019 compared to other cities. Regarding city heterogeneity, the synergy effect of non-resource-based cities is significantly higher than that of resource-based cities but a narrowed gap. The research provides a theoretical and factual basis for the design of a path toward low-carbon economic development in the YRD region.

Photovoltaic fields largely outperform afforestation efficiency in global climate change mitigation strategies

Suppression of carbon emissions through photovoltaic (PV) energy and carbon sequestration through afforestation provides complementary climate change mitigation (CCM) strategies. However, a quantification of the "break-even time" (BET) required to offset the warming impacts of the reduced surface reflectivity of incoming solar radiation (albedo effect) is needed, though seldom accounted for in CCM strategies. Here, we quantify the CCM potential of PV fields and afforestation, considering atmospheric carbon reductions, solar panel life cycle analysis (LCA), surface energy balance, and land area required across different climatic zones, with a focus on drylands, which offer the main remaining land area reserves for forestation aiming climate change mitigation (Rohatyn S, Yakir D, Rotenberg E, Carmel Y. Limited climate change mitigation potential through forestation of the vast dryland regions. 2022. Science 377:1436-1439). Results indicate a BET of PV fields of ∼2.5 years but >50× longer for dryland afforestation, even though the latter is more efficient at surface heat dissipation and local surface cooling. Furthermore, PV is ∼100× more efficient in atmospheric carbon mitigation. While the relative efficiency of afforestation compared with PV fields significantly increases in more mesic climates, PV field BET is still ∼20× faster than in afforestation, and land area required greatly exceeds availability for tree planting in a sufficient scale. Although this analysis focusing purely on the climatic radiative forcing perspective quantified an unambiguous advantage for the PV strategy over afforestation, both approaches must be combined and complementary, depending on climate zone, since forests provide crucial ecosystem, climate regulation, and even social services.

Concentration of asset owners exposed to power sector stranded assets may trigger climate policy resistance

Thoroughly assessing the owners and distribution of stranded assets in a 2 °C scenario is essential to anticipate climate policy resistance. We employ novel data to analyze owners and incidence of asset stranding in the power sector globally. We show that Asia-Pacific, Europe, and the US are highly exposed to stranded assets, especially coal plants. Stranded assets are highly concentrated in a few asset owners in some countries (e.g., India). Even if owners are more equally exposed (e.g., in the US) they can vary considerably in the asset stranding timing due to differences in plant fleets' age profile. European, US, and Chinese asset owners own large shares of stranded coal plants abroad. Listed owners may face stranded assets of up to 78% of their share price or more than 80% of their equity. Asset stranding exposure positively correlates with ownership of alternative energy assets. India stands out owning many stranded assets but little alternative energy.

The impact of energy security on environmental degradation: new evidence from developing countries

This study investigates the energy security and income roles in testing environmental Kuznets curve (EKC) for developing countries from 1990 to 2019. The panel quantile regression approaches are employed to examine the relationship between the variables, considering that income and energy security effects on carbon emissions may vary across distributions. Findings revealed that the EKC hypothesis was inconsistent at low and high quantiles when estimating energy availability, affordability, and acceptability. The validity of inverted U-shaped EKC is supported at high quantiles for energy affordability and accessibility in developing countries. However, given the energy accessibility and acceptability, the EKC hypothesis becomes invalid in developing countries. Notably, developing countries have yet to progress toward achieving energy security as a switch component to low carbon emissions. This study contributes to the literature by revealing the effect of availability, accessibility, affordability, and acceptability of energy security on carbon dioxide emissions (CO2). Thus, it suggests implications for improving environmental quality in developing countries by enhancing energy security. Diversifying energy sources with nuclear, renewable, and developing technologies reduces dependence risks on a single source while improving efficiency through technology and demand management lowers carbon emissions and strengthens energy security. Beyond energy security, this study emphasises sustainable urban planning to promote compact development, effective transportation, and green infrastructure to reduce energy use and improve environmental sustainability, ultimately reducing carbon emissions.

Decoupling for a greener future: a spatio-temporal analysis of CO2 emissions and economic growth

Climate change mitigation is a pressing global challenge that requires reducing CO2 emissions without hindering economic growth. Using an extended Kaya identity, Logarithmic Mean Divisia Index (LMDI), and Tapio decoupling indicator, this paper investigates the spatio-temporal variations, drivers, and decoupling of CO2 emissions from economic growth in 150 countries from 1990 to 2019, considering regional disparities and income-based inequalities. The findings reveal increasing CO2 emissions between 1990 and 2019, with notable fluctuations in certain 5-year intervals. CO2 emission growth varied significantly by region, with countries like China, the USA, India, and Japan experiencing rapid increases. Economic growth emerged as the primary driver of CO2 emission growth, and its impact strengthened over time. Population growth also contributed significantly to CO2 emissions, particularly in middle- and low-income countries. The study identifies energy and carbon intensity as crucial mitigating factors that weaken CO2 emissions, offering hope for effective climate change mitigation. Furthermore, the degree of decoupling between economic growth and CO2 emissions varied among countries in the same region, with high-income countries demonstrating stronger decoupling compared to upper-middle-income countries, which accounted for 71% of global CO2 emission increase. These findings underline the imperative of accounting for income levels and regional differences in formulating CO2 emission mitigation strategies. Also, the study emphasizes the pressing necessity for cohesive global coordination to facilitate the transition toward a low-carbon economy. Such collaborative endeavors are paramount in our collective pursuit to combat climate change effectively, safeguarding the well-being and sustenance of our planet for future generations. As policymakers, it is imperative to integrate these insights into decision-making processes to chart a sustainable and resilient course forward.

Global fossil fuel reduction pathways under different climate mitigation strategies and ambitions

The mitigation scenarios database of the Intergovernmental Panel on Climate Change's Sixth Assessment Report is an important resource for informing policymaking on energy transitions. However, there is a large variety of models, scenario designs, and resulting outputs. Here we analyse the scenarios consistent with limiting warming to 2 °C or below regarding the speed, trajectory, and feasibility of different fossil fuel reduction pathways. In scenarios limiting warming to 1.5 °C with no or limited overshoot, global coal, oil, and natural gas supply (intended for all uses) decline on average by 95%, 62%, and 42%, respectively, from 2020 to 2050, but the long-term role of gas is highly variable. Higher-gas pathways are enabled by higher carbon capture and storage (CCS) and carbon dioxide removal (CDR), but are likely associated with inadequate model representation of regional CO2 storage capacity and technology adoption, diffusion, and path-dependencies. If CDR is constrained by limits derived from expert consensus, the respective modelled coal, oil, and gas reductions become 99%, 70%, and 84%. Our findings suggest the need to adopt unambiguous near- and long-term reduction benchmarks in coal, oil, and gas production and use alongside other climate mitigation targets.

Dependence on the socio-economic system impairs the sustainability of pasture-based animal agriculture

Livestock systems contribution to environmental change is controversial. Pasture-based systems are considered a sustainable alternative due to their adaptation to the use of local natural resources. However, they have limited productivity per product unit and, in Europe, depend on public economic support. Furthermore, they are heterogeneous in farm structure and resources use, which may determine their sustainability. We use emergy accounting to assess the sustainability of mountain pasture-based cattle systems and analyse the variability among farms. Emergy accounting assesses the sustainability performance of complex systems (i.e., farming systems) and their interaction with other systems (i.e., the environment and the socio-economic system) focusing on the origin, quality and quantity of the energy required for the system to function. Results show that pasture-based systems largely use local natural renewable resources but depend largely on the wider socio-economic system given their reliance on public economic support and purchased animal feeds. This economic dependence turns out in most farms largely using non-renewable resources. Increasing self-produced feeds and grazing on natural pastures can reduce the dependence on the socio-economic system and improve farm sustainability.

Neurodynamics-based distributed model predictive control of a low-speed two-stroke marine main engine power system

This article studies a steady operation optimization problem of a low-speed two-stroke marine main engine (LTMME) power system including a cooling water subsystem, a fuel oil subsystem and a main engine subsystem with input and state constraints. Firstly, a distributed model with coupling inputs and states is established for the LTMME power system according to laws of thermodynamics and kinetics. Further, an optimization problem of the LTMME power system is formulated to ensure the system to operate steadily, subjected to constraint conditions of the distributed model and the input and state bounds. Moreover, the optimization problem is rewritten as a quadratic programming problem, and an iterative distributed model predictive control (DMPC) scheme based on a primal-dual neural network (PDNN) method is used to obtain the optimal inputs within the constrained range. Finally, based on the actual data from an underway ocean vessel named Mingzhou 501 with an LTMME power system, a group of simulations are carried out to verify the effectiveness of the proposed approach.

Synthesis of Mesoporous Carbon Adsorbents Using Biowaste Crude Glycerol as a Carbon Source via a Hard Template Method for Efficient CO2 Capture

Biowaste utilization as a carbon source and its transformation into porous carbons have been of great interest to promote environmental remediation owing to biowaste's cost-effectiveness and useful physicochemical properties. In this work, crude glycerol (CG) residue from waste cooking oil transesterification was employed to fabricate mesoporous crude glycerol-based porous carbons (mCGPCs) using mesoporous silica (KIT-6) as a template. The obtained mCGPCs were characterized and compared to commercial activated carbon (AC) and CMK-8, a carbon material prepared using sucrose. The study aimed to evaluate the potential of mCGPC as a CO₂ adsorbent and demonstrated its superior adsorption capacity compared to AC and comparable to CMK-8. The X-ray diffraction (XRD) and Raman results clearly depicted the structure of carbon nature with (002) and (100) planes and defect (D) and graphitic (G) bands, respectively. The specific surface area, pore volume, and pore diameter values confirmed the mesoporosity of mCGPC materials. The transmission electron microscopy (TEM) images also clearly revealed the porous nature with the ordered mesopore structure. The mCGPCs, CMK-8, and AC materials were used as CO₂ adsorbents under optimized conditions. The mCGPC adsorption capacity (1.045 mmol/g) is superior to that of AC (0.689 mmol/g) and still comparable to that of CMK-8 (1.8 mmol/g). The thermodynamic analyses of the adsorption phenomena are also carried out. This work demonstrates the successful synthesis of a mesoporous carbon material using a biowaste (CG) and its application as a CO₂ adsorbent.

Does corporate carbon performance converge in the global market? Evidence from a distribution dynamic approach

Converging corporate carbon performance (CCP) to a higher level is necessary to achieve the global goal of controlling temperature rise. However, it remains uncertain whether all international firms endeavour to improve CCP. Using a panel of 19,913 public companies from 76 countries during the 2010-2019 period and two visual tools of the distribution dynamics approach, we conduct a nascent analysis of transitional dynamics and the long-run evolution of CCP. We find that regardless of investigated period (before and after Paris Agreement) and regional location, most firms converge towards the highest CCP of 10, thereby improving carbon performance over time. After Paris Agreement, the convergence to the top CCP is more significant, whereas more companies cluster around the mediocre CCP (a value of 6.7), thus evidencing an increased heterogeneity in convergence paths. Firms from East Asia & Pacific and the North American regions drive such heightened heterogeneity. Specifically, enterprises from East Asia & Pacific show the least convergence towards the highest CCP, probably because more manufacturing firms in the region primarily rely on fossil fuels and face loose environmental regulations. Therefore, further improving CCP may require substantial investments in equipment upgrades and would result in significantly higher costs. For North America, the results can be associated with Donald Trump's policy towards climate change and bid to withdraw from the Paris Agreement, reflecting firms taking a Republican stand, most likely diverging to mediocre CCP and experiencing a decline in future carbon management. The observed convergence towards the highest CCP is nearly twice as significant among firms from OECD than non-OECD countries, which aligns with global enterprises outsourcing emissions to developing countries. The study reveals the pattern of strong convergence to the highest CCP in the global firms as evidence of collective efforts in the transition to net zero. However, divergence and increased heterogeneity may occur in some regions due to politics, industrial structure and regulations.

Computational Analysis of Chemical Reactions Using a Variational Quantum Eigensolver Algorithm without Specifying Spin Multiplicity

The analysis of a chemical reaction along the ground-state potential energy surface in conjunction with an unknown spin state is challenging because electronic states must be separately computed several times using different spin multiplicities to find the lowest energy state. However, in principle, the ground state could be obtained with just a single calculation using a quantum computer without specifying the spin multiplicity in advance. In the present work, ground-state potential energy curves for PtCO were calculated as a proof-of-concept using a variational quantum eigensolver (VQE) algorithm. This system exhibits a singlet-triplet crossover as a consequence of the interaction between Pt and CO. VQE calculations using a statevector simulator were found to converge to a singlet state in the bonding region, while a triplet state was obtained at the dissociation limit. Calculations performed using an actual quantum device provided potential energies within ±2 kcal/mol of the simulated energies after error mitigation techniques were adopted. The spin multiplicities in the bonding and dissociation regions could be clearly distinguished even in the case of a small number of shots. The results of this study suggest that quantum computing can be a powerful tool for the analysis of the chemical reactions of systems for which the spin multiplicity of the ground state and variations in this parameter are not known in advance.

Effects of activation overpotential in photoelectrochemical cells considering electrical and optical configurations

Photoelectrochemical cells (PECs) are a promising option for directly converting solar energy into chemical energy by producing hydrogen (H₂) gas, thus providing a clean alternative to consuming fossil fuels. H₂ as fuel is free from any carbon footprints and negative environmental impacts. Therefore, the H₂ production, especially directly using sunlight in PECs, is critically important for the rapidly growing energy demand of the world. Although promising, PECs are inefficient and must overcome a few inherent losses in producing H₂-the most important being the activation overpotential (ηa) required for splitting water. This work analyzes the impact of ηa on solar-to-fuel efficiency (ηSTF) and H₂ production rate (HPR). This work also discusses choosing appropriate photo-absorbing materials based on their energy bandgaps and suitable electrode pairs to achieve desired ηSTF and HPR for different electrical and optical PEC configurations. Significant changes are observed in ηSTF and HPR when ηa is considered in water splitting.

Origins of pressure dependent permeability in unconventional hydrocarbon reservoirs

Unconventional hydrocarbon assets represent a rapidly expanding proportion of North American oil and gas production. Similar to the incipient phase of conventional oil production at the turn of the twentieth century, there are ample opportunities to improve production efficiency. In this work we demonstrate that pressure dependent permeability degradation exhibited by unconventional reservoir materials is due to the mechanical response of a few commonly encountered microstructural constituents. In particular, the mechanical response of unconventional reservoir materials may be conceptualized as the superposed deformation of matrix (or ~ cylindrical/spherical), and compliant (or slit) pores. The former are representative of pores in a granular medium or a cemented sandstone, while the latter represent pores in an aligned clay compact or a microcrack. As a result of this simplicity, we demonstrate that permeability degradation is accounted for through a weighted superposition of conventional permeability models for these pore architectures. This approach permits us to conclude that the most severe pressure dependence is due to imperceptible bedding parallel delamination cracks in the oil bearing argillaceous (clay-rich) mudstones. Finally, we demonstrate that these delaminations tend to populate layers that are enriched with organic carbon. These findings are a basis for improving recovery factors through the development of new completion techniques to exploit, then mitigate pressure dependent permeability in practice.

Anthropogenic influence on extreme temperature and precipitation in Central Asia

We investigate the contribution of anthropogenic forcing to the extreme temperature and precipitation events in Central Asia (CA) during the last 60 years. We bias-adjust and downscale two Inter-Sectoral Impact Model Intercomparison Project (ISIMIP) ensemble outputs, with natural (labelled as hist-nat, driven only by solar and volcanic forcing) and natural plus anthropogenic forcing (labelled as hist, driven by all-forcings), to [Formula: see text] spatial resolution. Each ensemble contains six models from ISIMIP, based on the Coupled Model Inter-comparison Project phase 6 (CMIP6). The presented downscaling methodology is necessary to create a reliable climate state for regional climate impact studies. Our analysis shows a higher risk of extreme heat events (factor 4 in signal-to-noise ratio) over large parts of CA due to anthropogenic influence. Furthermore, a higher likelihood of extreme precipitation over CA, especially over Kyrgyzstan and Tajikistan, can be attributed to anthropogenic forcing (over 100[Formula: see text] changes in intensity and 20[Formula: see text] in frequency). Given that these regions show a high risk of rainfall-triggered landslides and floods during historical times, we report that human-induced climate warming can contribute to extreme precipitation events over vulnerable areas of CA. Our high-resolution data set can be used in impact studies focusing on the attribution of extreme events in CA and is freely available to the scientific community.

Water Oxidation by a Copper(II) Complex with 6,6'-Dihydroxy-2,2'-Bipyridine Ligand: Challenges and an Alternative Mechanism

Recently, copper(II) complexes have been extensively investigated as oxygen-evolution reaction (OER) catalysts through a water-oxidation reaction. Herein, new findings regarding OER in the presence of a Cu(II) complex with 6,6'-dihydroxy-2,2'-bipyridine ligand are reported. Using scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, Raman spectroscopy, in situ visible microscopy, in situ visible spectroelectrochemistry, X-ray absorption spectroscopy, and electrochemistry, it is hypothesized that the film formed on the electrode's surface in the presence of this complex causes an appropriated matrix to produce Cu (hydr)oxide. The resulting Cu (hydr)oxide could be a candidate for OER catalysis. The formed film could form Cu (hydr)oxide and stabilize it. Thus, OER activity increases in the presence of this complex.

Use of A-Site Metal Exsolution from a Hydrated Perovskite Titanate for Combined Steam and CO2 Reforming of Methane

Metal segregation from a perovskite oxide (ABO₃) usually referring to "redox metal exsolution" has recently been used for in situ preparation of a well-designed catalyst where metal nanoparticles are homogeneously and strongly embedded on perovskite scaffolds upon reduction. The exsolution concept of B-site transition metal ions has grown, but several issues such as segregation of A-site alkaline-earth metal ions (altering electronic structures of the perovskite surface, causing deformation of perovskite structures, or creating undesirable products via side reactions) and carbon formations on metal nanoparticles should be addressed for stable catalysts in greenhouse gas (CO₂ or CH₄) conversion. Here, we suggest a new approach to designing metal-perovskite composite catalysts via A-site metal segregation from a hydrated perovskite titanate. In situ formation of A-site-deficient hydrated CaTiO₃ accompanied with Ni exsolution solids leads to ∼78 and 65% of CH₄ and CO₂ conversion, respectively, suppressing carbon formations and alkaline-earth metal segregations in combined steam and carbon dioxide reforming of methane at 700 °C. It would help to design active and stable metal-perovskite catalysts for energy and environmental applications.

Spotlighting of the role of catalysis for biomass conversion to green fuels towards a sustainable environment: Latest innovation avenues, insights, challenges, and future perspectives

Recently, extensive resources were dedicated to studying how to use catalysis to convert biomass into environmentally friendly fuels. Problems with this technology include the processing of lignocellulosic sources and the development/optimization of novel porous materials as efficient monofunctional and bifunctional catalysts for biomass fuel production. This paper reviews recent advancements in catalysts procedures. Besides, it offers assessments of the methods used in catalytic biomass pyrolysis. Understanding the catalytic conversion process of lignocellulosic biomass into bio-oil remains a key research challenge in biomass catalytic pyrolysis.

Discovery, disassembly, depolymerization and derivatization of catechyl lignin in Chinese tallow seed coats

The search for feedstock of catechyl lignin (C-lignin) is great interest and importance, as C-lignin featuring homogeneity and linearity is considered as an "ideal lignin" archetype for valorization and exits in only a few plant seed coats. In this study, naturally occurring C-lignin is first discovered in the seed coats of Chinese tallow, which has the highest content of C-lignin (15.4 wt%) as compared with other known feedstocks. An optimized extraction procedure by ternary deep eutectic solvents (DESs) enables the complete disassembly of C-lignin and G/S-lignin coexisted in Chinese tallow seed coats, and characterizations revealed that the as-separated C-lignin sample is abundant in benzodioxane units with no observation of β-O-4 structures from G/S-lignin. Catalytic depolymerization of C-lignin results in a simplex catechol product in 129 mg per gram seed coats, being higher than other reported feedstocks. Derivatizing the "black" C-lignin via the nucleophilic isocyanation of benzodioxane γ-OH leads to a "whitened C-lignin" with uniform laminar structure and excellent crystallization ability, being conducive to fabricating functional materials. Overall, this contribution showed that Chinses tallow seed coats are suitable feedstock for acquiring C-lignin biopolymer.

Climate justice in higher education: a proposed paradigm shift towards a transformative role for colleges and universities

Moving beyond technocratic approaches to climate action, climate justice articulates a paradigm shift in how organizations think about their response to the climate crisis. This paper makes a conceptual contribution by exploring the potential of this paradigm shift in higher education. Through a commitment to advancing transformative climate justice, colleges and universities around the world could realign and redefine their priorities in teaching, research, and community engagement to shape a more just, stable, and healthy future. As inequitable climate vulnerabilities increase, higher education has multiple emerging opportunities to resist, reverse, and repair climate injustices and related socioeconomic and health disparities. Rather than continuing to perpetuate the concentration of wealth and power by promoting climate isolationism's narrow focus on technological innovation and by prioritizing the financial success of alumni and the institution, colleges and universities have an opportunity to leverage their unique role as powerful anchor institutions to demonstrate climate justice innovations and catalyze social change toward a more equitable, renewable-based future. This paper explores how higher education can advance societal transformation toward climate justice, by teaching climate engagement, supporting impactful justice-centered research, embracing non-extractive hiring and purchasing practices, and integrating community-engaged climate justice innovations across campus operations. Two climate justice frameworks, Green New Deal-type policies and energy democracy, provide structure for reviewing a breadth of proposed transformational climate justice initiatives in higher education.