1
|
Kar C, De R, Jena S, Bhakta S, Sahoo PK, Pradhan S, Rao KD, Udupa DV. Spatially selective narrow band and broadband absorption in Ag/SiO 2/Ag based trilayer thin films by oblique angle deposition of SiO 2layer. NANOTECHNOLOGY 2024; 35:305707. [PMID: 38631308 DOI: 10.1088/1361-6528/ad3fc0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2023] [Accepted: 04/17/2024] [Indexed: 04/19/2024]
Abstract
We have experimentally demonstrated spatially selective absorption in Ag-SiO2-Ag based trilayer thin films by tuning the deposition angle of SiO2layer. These structures generate cavity resonance which can be tuned across the substrate locations due to spatially selective thickness and refractive index of silicon oxide (SiO2) film sandwiched between metallic silver (Ag) mirrors. Spatially selective property of SiO2film is obtained by oblique angle deposition technique using an electron beam evaporation system. The resonance wavelength of absorption in this trilayer structure shifts across the substrate locations along the direction of oblique deposition. The extent of shift in resonance increases with increase in angle of deposition of SiO2layer. 4.14 nm mm-1average shift of resonance wavelength is observed when SiO2is deposited at 40° whereas 4.76 nm mm-1average shift is observed when SiO2is deposited at 60°. We observed that the width of resonance increases with angle of deposition of the cavity layer and ultimately the resonant absorption disappears and becomes broadband when SiO2is deposited at glancing angle deposition (GLAD) configuration. Our study reveals that there is a suitable range of oblique angle of deposition from 40° to 60° for higher spatial tunability and resonant absorption whereas the absorption becomes broadband for glancing angle deposition.
Collapse
Affiliation(s)
- Chinmaya Kar
- Photnics & Quantum Optics Section, Atomic & Molecular Physics Division, Bhabha Atomic Research Centre, Visakhapatnam, Andhra Pradesh-531011, India
| | - Rajnarayan De
- Photnics & Quantum Optics Section, Atomic & Molecular Physics Division, Bhabha Atomic Research Centre, Visakhapatnam, Andhra Pradesh-531011, India
| | - Shuvendu Jena
- Optics and Analytical Spectroscopy Section, Atomic & Molecular Physics Division, Bhabha Atomic Research Centre, Mumbai, Maharashtra-400085, India
- Homi Bhabha National Institute, Anushaktinagar, Mumbai-400094, India
| | - S Bhakta
- School of Physical Sciences, National Institute of Science Education and Research, Bhubaneswar, Odisha-752050, India
| | - P K Sahoo
- School of Physical Sciences, National Institute of Science Education and Research, Bhubaneswar, Odisha-752050, India
| | - S Pradhan
- Photnics & Quantum Optics Section, Atomic & Molecular Physics Division, Bhabha Atomic Research Centre, Visakhapatnam, Andhra Pradesh-531011, India
- Homi Bhabha National Institute, Anushaktinagar, Mumbai-400094, India
| | - K Divakar Rao
- Photnics & Quantum Optics Section, Atomic & Molecular Physics Division, Bhabha Atomic Research Centre, Visakhapatnam, Andhra Pradesh-531011, India
- Homi Bhabha National Institute, Anushaktinagar, Mumbai-400094, India
| | - Dinesh V Udupa
- Optics and Analytical Spectroscopy Section, Atomic & Molecular Physics Division, Bhabha Atomic Research Centre, Mumbai, Maharashtra-400085, India
- Homi Bhabha National Institute, Anushaktinagar, Mumbai-400094, India
| |
Collapse
|
2
|
Coello V, Abdulkareem MUA, Garcia-Ortiz CE, Sosa-Sánchez CT, Téllez-Limón R, Peña-Gomar M. Plasmonic Coupled Modes in a Metal-Dielectric Periodic Nanostructure. MICROMACHINES 2023; 14:1713. [PMID: 37763875 PMCID: PMC10535901 DOI: 10.3390/mi14091713] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/12/2023] [Revised: 07/25/2023] [Accepted: 07/29/2023] [Indexed: 09/29/2023]
Abstract
In this study we investigate the optical properties of a 2D-gap surface plasmon metasurface composed of gold nanoblocks (nanoantennas) arranged in a metal-dielectric configuration. This novel structure demonstrates the capability of generating simultaneous multi-plasmonic resonances and offers tunability within the near-infrared domain. Through finite difference time domain (FDTD) simulations, we analyze the metasurface's reflectance spectra for various lattice periods and identify two distinct dips with near-zero reflectance, indicative of resonant modes. Notably, the broader dip at 1150 nm exhibits consistent behavior across all lattice periodicities, attributed to a Fano-type hybridization mechanism originating from the overlap between localized surface plasmons (LSPs) of metallic nanoblocks and surface plasmon polaritons (SPPs) of the underlying metal layer. Additionally, we investigate the influence of dielectric gap thickness on the gap surface plasmon resonance and observe a blue shift for smaller gaps and a spectral red shift for gaps larger than 100 nm. The dispersion analysis of resonance wavelengths reveals an anticrossing region, indicating the hybridization of localized and propagating modes at wavelengths around 1080 nm with similar periodicities. The simplicity and tunability of our metasurface design hold promise for compact optical platforms based on reflection mode operation. Potential applications include multi-channel biosensors, second-harmonic generation, and multi-wavelength surface-enhanced spectroscopy.
Collapse
Affiliation(s)
- Victor Coello
- Centro de Investigación Científica y de Educación Superior de Ensenada, Unidad Monterrey, Alianza Centro 504, PIIT, Apodaca 66629, Mexico; (V.C.); (C.T.S.-S.)
| | - Mas-ud A. Abdulkareem
- Facultad de Ciencias Físico Matemáticas, Universidad Michoacana de San Nicolás de Hidalgo, Avenida Francisco J. Múgica s/n, Ciudad Universitaria, Morelia 58030, Mexico; (M.-u.A.A.); (M.P.-G.)
| | - Cesar E. Garcia-Ortiz
- School of Engineering and Sciences, Tecnologico de Monterrey, Monterrey 64849, Mexico
| | - Citlalli T. Sosa-Sánchez
- Centro de Investigación Científica y de Educación Superior de Ensenada, Unidad Monterrey, Alianza Centro 504, PIIT, Apodaca 66629, Mexico; (V.C.); (C.T.S.-S.)
| | - Ricardo Téllez-Limón
- CONACYT—Centro de Investigación Científica y de Educación Superior de Ensenada, Unidad Monterrey, Alianza Centro 504, PIIT, Apodaca 66629, Mexico;
| | - Marycarmen Peña-Gomar
- Facultad de Ciencias Físico Matemáticas, Universidad Michoacana de San Nicolás de Hidalgo, Avenida Francisco J. Múgica s/n, Ciudad Universitaria, Morelia 58030, Mexico; (M.-u.A.A.); (M.P.-G.)
| |
Collapse
|
3
|
Wu Z, Liu J, Wang Z, Chen L, Xu Y, Ma Z, Kong D, Luo D, Liu YJ. Nanosphere Lithography-Enabled Hybrid Ag-Cu Surface-Enhanced Raman Spectroscopy Substrates with Enhanced Absorption of Excitation Light. BIOSENSORS 2023; 13:825. [PMID: 37622911 PMCID: PMC10452600 DOI: 10.3390/bios13080825] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/28/2023] [Revised: 08/15/2023] [Accepted: 08/15/2023] [Indexed: 08/26/2023]
Abstract
We demonstrated a low-cost, highly sensitive hybrid Ag-Cu substrate with enhanced absorption for the excitation laser beam via the nanosphere lithography technique. The hybrid Ag-Cu surface-enhanced Raman spectroscopy (SERS) substrate consists of a Cu nanoarray covered with Ag nanoparticles. The geometry of the deposited Cu nanoarray is precisely determined through a self-assembly nanosphere etching process, resulting in optimized absorption for the excitation laser beam. Further Raman enhancement is achieved by incorporating plasmonic hotspots formed by dense Ag nanoparticles, grown by immersing the prepared Cu nanoarray in a silver nitrate solution. The structural design enables analytical enhancement factor of hybrid Ag-Cu SERS substrates of 1.13 × 105. The Ag-Cu SERS substrates exhibit a highly sensitive and reproducible SERS activity, with a low detection limit of 10-13 M for Rhodamine 6G detection and 10-9 M for 4,4'-Bipyridine. Our strategy could pave an effective and promising approach for SERS-based rapid detection in biosensors, environmental monitoring and food safety.
Collapse
Affiliation(s)
- Zixuan Wu
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
| | - Jianxun Liu
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
- Shenzhen Engineering Research Center for High Resolution Light Field Display and Technology, Southern University of Science and Technology, Shenzhen 518055, China
| | - Zhenming Wang
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
- Shenzhen Engineering Research Center for High Resolution Light Field Display and Technology, Southern University of Science and Technology, Shenzhen 518055, China
| | - Lei Chen
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
- Shenzhen Engineering Research Center for High Resolution Light Field Display and Technology, Southern University of Science and Technology, Shenzhen 518055, China
| | - Yiwei Xu
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
| | - Zongjun Ma
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
- Shenzhen Engineering Research Center for High Resolution Light Field Display and Technology, Southern University of Science and Technology, Shenzhen 518055, China
| | - Delai Kong
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
- Shenzhen Engineering Research Center for High Resolution Light Field Display and Technology, Southern University of Science and Technology, Shenzhen 518055, China
| | - Dan Luo
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
| | - Yan Jun Liu
- Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China; (Z.W.); (Z.W.); (L.C.); (Y.X.); (Z.M.); (D.K.); (D.L.)
- Shenzhen Engineering Research Center for High Resolution Light Field Display and Technology, Southern University of Science and Technology, Shenzhen 518055, China
| |
Collapse
|
4
|
Sayed SI, Mahmoud KR, Mubarak RI. Design and optimization of broadband metamaterial absorber based on manganese for visible applications. Sci Rep 2023; 13:11937. [PMID: 37488131 PMCID: PMC10366329 DOI: 10.1038/s41598-023-38263-x] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2023] [Accepted: 07/05/2023] [Indexed: 07/26/2023] Open
Abstract
Metamaterial absorbers have been extensively researched due to their potential applications in photonics. This paper presents a highly efficient Broadband Metamaterial Absorber (BMA) based on a Manganese-Silica-Manganese three layer structure with a shaped pattern at the top layer. For maximum absorption efficiency, the geometrical parameters of the proposed absorber have been optimized based on Particle Swarm Optimization (PSO). The optimal structure with a thickness of 190 nm, can achieve more than 94% absorption spanning visible band (400-800) nm with 98.72% average absorption, and more than 90% absorption over the range from 365 to 888 nm. In the range from 447 to 717 nm, the design presented above 99% absorptivity, providing an ultra-wide bandwidth of 270 nm. The physical mechanism of absorption is illustrated through the exploration of the electric and magnetic field distributions. Additionally, the proposed structure maintains 85% absorption stability for wide incident angles up to 70° for both the TE and TM polarizations under oblique incidence. Further, the optimized absorber structure with excellent absorption capabilities makes it suitable for various applications, including optical sensors, thermal emitters, and color imaging applications.
Collapse
Affiliation(s)
- Shimaa I Sayed
- Electronics and Communications Department, Faculty of Engineering, Helwan University, Cairo, Egypt.
| | - K R Mahmoud
- Electronics and Communications Department, Faculty of Engineering, Helwan University, Cairo, Egypt
- National Telecommunications Regulatory Authority (NTRA), Giza, Egypt
| | - Roaa I Mubarak
- Electronics and Communications Department, Faculty of Engineering, Helwan University, Cairo, Egypt
| |
Collapse
|
5
|
Mokhtari A, Rezaei MH, Zarifkar A. Near-perfect wide-band absorbers based on one-dimensional photonic crystal structures in 1-20 THz frequencies. APPLIED OPTICS 2023; 62:3660-3671. [PMID: 37706983 DOI: 10.1364/ao.484617] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/29/2022] [Accepted: 03/28/2023] [Indexed: 09/15/2023]
Abstract
This paper investigates the absorption behavior of one-dimensional (1D) photonic crystal (PhC) structures in the 1-20 THz region. The structures are analyzed by the transfer matrix method to achieve accurate results quickly with ordinary simulation facilities. The simulation results indicate a strong dependence of the absorber performance on the thickness and material of the PhC layers, as well as the frequency and angle of incident light. The combination of silica and titanium (Ti) materials as dielectric and metal layers presents a great choice for broadband high-absorption applications so that this structure can absorb, on average, more than 80% of the normal incident radiation in the studied frequency range. Additionally, this absorber has the lowest dependence on incident light with the angle varying from 0° to 80° compared to identical absorbers with silver, aluminum, gold, chromium, nickel, and tungsten metals. The excellent absorption feature of the Ti-based absorber compared to the other absorbers is attributed to the lower permittivity of Ti (in both real and imaginary parts) in comparison with the other metals. In addition to owning simple and fabrication-friendly structures, 1D PhCs can pave the way to achieve various absorption spectra proportional to the needs of photonics, communications, and aerospace applications.
Collapse
|
6
|
Wu SH, Su PH, Kan HC. Surface plasmon polariton assisted near perfect light absorption from corrugated metal-insulator-metal structure exploiting lossy metal films. NANOTECHNOLOGY 2023; 34:205203. [PMID: 36626808 DOI: 10.1088/1361-6528/acb1b4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2022] [Accepted: 01/10/2023] [Indexed: 06/17/2023]
Abstract
We propose and demonstrate a lithography-free self-assembled corrugated Cr/TiO2/Cr metal-insulator-metal (Cr-cMIM) structure on silica opal substrates for broadband near perfect light absorption applications. Our optimal Cr-cMIM structure have reached a spectral average absorption rate above 98% over the visible wavelength range. We carried out numerical calculations to simulate the interaction between the incident light and the Cr-cMIM structure. The simulated absorption spectra qualitatively reproduced the experimental results. Detailed analysis of the simulation results indicates that the corrugation of the Cr layers successfully couples the incident light with the localized surface plasmon polariton. The incorporation of the surface plasmonic excitation and the intrinsic ohmic dissipation of the Cr layers results in the broadband near perfect light absorption over the visible wavelength range.
Collapse
Affiliation(s)
- Shin-Hong Wu
- Department of Physics, National Chung Cheng University, 168, Sec. 1, University Road, Ming-Hsiung, Chia-yi 621, Taiwan, ROC
| | - Po-Han Su
- Department of Physics, National Chung Cheng University, 168, Sec. 1, University Road, Ming-Hsiung, Chia-yi 621, Taiwan, ROC
| | - Hung-Chih Kan
- Department of Physics, National Chung Cheng University, 168, Sec. 1, University Road, Ming-Hsiung, Chia-yi 621, Taiwan, ROC
| |
Collapse
|
7
|
Asad MS, Alam MZ. Transparent planar solar absorber for winter thermal management. Sci Rep 2022; 12:22325. [PMID: 36567355 PMCID: PMC9790891 DOI: 10.1038/s41598-022-19448-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/19/2022] [Accepted: 08/29/2022] [Indexed: 12/26/2022] Open
Abstract
Indoor heating during winters accounts for a significant portion of energy consumed by buildings in regions of cold climate. Development of transparent coatings for windows that efficiently harvest solar energy can play a major role in reducing energy consumption and fuel costs incurred for winter heating. In recent years, there has been a great research effort towards designing transparent solar absorber coatings using nanophotonic structures. The potential of coatings based on planar multilayer structures, however, has received very little attention. In this work we investigate the performance of planar multilayer thin films using low-cost materials for design of transparent solar absorber window coatings. Our study led to the proposal of two planar multilayer designs. Simulation results predict that an increase in surface temperature by 27 K and 25 K, while maintaining mean visible transmittance of over 50% is possible using these designs. These results illustrate the great promise planar multilayer structures hold for winter thermal management of buildings.
Collapse
Affiliation(s)
- Muhammad Saad Asad
- grid.410356.50000 0004 1936 8331Department of Electrical and Computer Engineering, Queen’s University, Kingston, Canada
| | - M. Z. Alam
- grid.410356.50000 0004 1936 8331Department of Electrical and Computer Engineering, Queen’s University, Kingston, Canada
| |
Collapse
|
8
|
Bezus EA, Bykov DA, Doskolovich LL. Total absorption and coherent perfect absorption in metal-dielectric-metal resonators integrated into a slab waveguide. OPTICS LETTERS 2022; 47:4403-4406. [PMID: 36048664 DOI: 10.1364/ol.470962] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/22/2022] [Accepted: 08/09/2022] [Indexed: 06/15/2023]
Abstract
We propose and investigate integrated metal-dielectric-metal (MDM) resonators operating with semi-guided waves (guided modes of dielectric slab waveguides). The MDM resonators are constituted by two metal strips "buried" in the waveguide core layer and separated by a dielectric waveguide segment. We theoretically prove and numerically demonstrate that by a proper choice of the mode incidence geometry, the widths of the metal strips, and the distance between them, it is possible to achieve either total absorption of the incident wave or coherent perfect absorption (in the case of symmetric incidence of two modes on the structure). The proposed planar MDM resonators may find application as absorbers or filters in integrated optical circuits.
Collapse
|
9
|
Hassan MM, Islam F, Baten MZ, Subrina S. Analysis and design of InAs nanowire array based ultra broadband perfect absorber. RSC Adv 2021; 11:37595-37603. [PMID: 35496425 PMCID: PMC9043912 DOI: 10.1039/d1ra06812a] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2021] [Accepted: 11/05/2021] [Indexed: 11/24/2022] Open
Abstract
An ultra-broadband perfect absorber has a wide range of applications which include solar energy harvesting, imaging, photodetection etc. In this regard, InAs nanowire (NW) based structure is investigated in this work for achieving an ultra broadband perfect absorber. Finite difference time domain (FDTD) based numerical analysis has been performed to optimize the InAs nanowire based structure to obtain an efficient light absorber by varying different dimensional parameters. Mie theory and guided mode resonance based theoretical analysis is developed to validate the results and to get an insight into the tunability of the nanowire based structure. Moreover, the theoretical analysis elucidates the underlying physics of light absorption in nanowires. To achieve ultra broadband absorption, multi radii InAs nanowire based arrays are investigated and it is found that they exhibit superior performance compared to single radius NW based structures. The computed light absorption efficiency (LAE) and short circuit current density values are enhanced to 97% and 40.15 mA cm−2 at 10° angle of incidence for the optimized quad radii NW array within the wavelength range of 300 nm to 1000 nm and 300 nm to 1200 nm, respectively. Moreover, the absorption spectra for these structures are polarization independent and exhibit robust performance for varying angle of incidence. In addition, arrangement of the NW array (hexagonal or square) has negligible effect on the absorption spectra. Such ultra-broadband absorption capability of the proposed structure compared to existing works suggests that the InAs nanowire based structure is very promising as light absorber with prospects in the fields of photo detection, solar power generation, perfect cloaking, photochemistry and other thin film photonic devices. Mie theory and GMR based theoretical framework support the numerical results that resonant wavelength increases with increasing InAs NW diameter. By employing NWs of different diameters in a single array, an ultra-broadband perfect absorber has been achieved.![]()
Collapse
Affiliation(s)
- Mohammad Muntasir Hassan
- Department of Electrical and Electronic Engineering, Bangladesh University of Engineering and Technology Bangladesh .,Institute of Information and Communication Technology, Bangladesh University of Engineering and Technology Bangladesh
| | - Fariba Islam
- Department of Electrical and Electronic Engineering, Bangladesh University of Engineering and Technology Bangladesh
| | - Md Zunaid Baten
- Department of Electrical and Electronic Engineering, Bangladesh University of Engineering and Technology Bangladesh
| | - Samia Subrina
- Department of Electrical and Electronic Engineering, Bangladesh University of Engineering and Technology Bangladesh
| |
Collapse
|
10
|
Chervinskii S, Issah I, Lahikainen M, Rashed AR, Kuntze K, Priimagi A, Caglayan H. Humidity- and Temperature-Tunable Metal-Hydrogel-Metal Reflective Filters. ACS APPLIED MATERIALS & INTERFACES 2021; 13:50564-50572. [PMID: 34643385 PMCID: PMC8554756 DOI: 10.1021/acsami.1c15616] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/16/2021] [Accepted: 10/04/2021] [Indexed: 06/01/2023]
Abstract
A tunable reflectance filter based on a metal-hydrogel-metal structure responsive to humidity and temperature is reported. The filter employs a poly(N-isopropylacrylamide)-acrylamidobenzophenone (PNIPAm-BP) hydrogel as an insulator layer in the metal-insulator-metal (MIM) assembly. The optical resonance of the structure is tunable by water immersion across the visible and near-infrared range. Swelling/deswelling and the volume phase transition of the hydrogel allow continuous reversible humidity- and/or temperature-induced tuning of the optical resonance. This work paves the way toward low-cost large-area fabrication of actively tunable reversible photonic devices.
Collapse
|
11
|
Khan MS, Varshney G, Giri P. Altering the Multimodal Resonance in Ultrathin Silicon Ring for Tunable THz Biosensing. IEEE Trans Nanobioscience 2021; 20:488-496. [PMID: 34410927 DOI: 10.1109/tnb.2021.3105561] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
A technique is implemented for altering the multimodal resonance generated in an ultrathin silicon ring resonator-based terahertz (THz) absorber. The absorber provides the dual-band resonance with the excitation of magnetic and electric dipole in the lower and upper band, respectively. The field of magnetic and electric dipoles is altered using a non-resonant graphene ring placed in the center of the generated dipolar arrangement and the tunability and perfect absorption is achieved. A circuit model is prepared using transmission line method and absorber operation is verified. The proposed absorber can be utilized as a biosensor for the detection of malaria virus and glucose percentage in water. The sensor offers highest sensitivity as 0.29 and 0.27 THz per thickness unit change and quality factor as 117.53 and 245 in the lower and upper band, respectively during the sensing of analyte thickness. Also, it offers the sensitivity as 0.20 and 0.10 THz per refractive index unit change and quality factor as 105.28 and 211.84 in the lower and upper band, respectively during refractive index sensing. Moreover, the structure remains insensitive to polarization angle of the incident electromagnetic wave.
Collapse
|
12
|
Gomes de Souza IL, Rodriguez‐Esquerre VF, Alves Oliveira I. Design of Planar Reconfigurable, Tunable, and Wide Angle Resonant Absorbers for Applications in the IR Spectrum. ADVANCED THEORY AND SIMULATIONS 2021. [DOI: 10.1002/adts.202100002] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
Affiliation(s)
- Igor Leonardo Gomes de Souza
- Institute of Science Technology and Innovation at the Federal University of Bahia (ICTI‐UFBA) Camaçari Bahia 42802‐721 Brazil
| | | | - Israel Alves Oliveira
- Department of Electrical Engineering Federal University of Bahia (UFBA) Salvador Bahia 40210‐630 Brazil
| |
Collapse
|
13
|
Wu D, Chen J. Broadening Bandwidths of Few-Layer Absorbers by Superimposing Two High-Loss Resonators. NANOSCALE RESEARCH LETTERS 2021; 16:26. [PMID: 33566218 PMCID: PMC7876209 DOI: 10.1186/s11671-020-03471-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/18/2020] [Accepted: 12/29/2020] [Indexed: 06/12/2023]
Abstract
Efficient broadband absorption of solar radiation is desired for sea water desalination, icephobicity and other renewable energy applications. We propose an idea of superimposing two high-loss resonances to broaden bandwidths of a few-layer absorber, which is made of dielectric/ metal/dielectric/ metal layers. Both the simulation and experiment show that the structure has an averaged absorption efficiency higher than 97% at wavelengths ranging from 350 to 1200 nm. The bandwidth of the absorption larger than 90% is up to 1000 nm (410-1410 nm), which is greater than that (≤ 750 nm) of previous MIM planar absorbers. Especially, the average absorption from 350 to 1000 nm is kept above 90% at an incidence angle as high as 65°, meanwhile still maintained above 80% even at an incident angle of 75°. The performance of angular insensitivity is much better than that of previous few-layer solar absorbers. The flexible 1D nonoble metasurface absorbers are fabricated in a single evaporation step. Under the illumination of a halogen lamp of P = 1.2 kW/m2, the flexible metasurface increases its surface temperature by 25.1 K from room temperature. Further experiments demonstrate that the heat localization rapidly melts the accumulated ice. Our illumination intensity (P = 1.2 kW/m2) is only half of that (P = 2.4 kW/m2) in previous solar anti-ice studies based on gold/TiO2 particle metasurfaces, indicating that our metasurface is more advantageous topractical applications. Our results illustrate an effective pathway toward the broadband metasurface absorbers with the attractive properties of mechanical flexibility, low cost of the no-noble metals, and large-area fabrications, which have promising prospects in the applications of solar heat utilization.
Collapse
Affiliation(s)
- Dong Wu
- State Key Laboratory for Mesoscopic Physics, School of Physics, Peking University, Beijing, 100871, China
| | - Jianjun Chen
- State Key Laboratory for Mesoscopic Physics, School of Physics, Peking University, Beijing, 100871, China.
- Department of Physics and Applied Optics Beijing Area Major Laboratory, Beijing Normal University, Beijing, 100875, China.
- Peking University Yangtze Delta Institute of Optoelectronics, Nantong, 226010, Jiangsu, China.
- Frontiers Science Center for Nano-Optoelectronics & Collaborative Innovation Center of Quantum Matter, Peking University, Beijing, 100871, China.
- Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan, 030006, Shanxi, China.
| |
Collapse
|
14
|
Park CS, Lee SS. Narrowband and flexible perfect absorber based on a thin-film nano-resonator incorporating a dielectric overlay. Sci Rep 2020; 10:17727. [PMID: 33082497 PMCID: PMC7576172 DOI: 10.1038/s41598-020-74893-1] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2020] [Accepted: 10/05/2020] [Indexed: 11/09/2022] Open
Abstract
We developed a flexible perfect absorber based on a thin-film nano-resonator, which consists of metal-dielectric-metal integrated with a dielectric overlay. The proposed perfect absorber exhibits a high quality (Q-)factor of ~ 33 with a narrow bandwidth of ~ 20 nm in the visible band. The resonance condition hinging on the adoption of a dielectric overlay was comprehensively explored by referring to the absorption spectra as a function of the wavelength and thicknesses of the overlay and metal. The results verified that utilizing a thicker metal layer improved the Q-factor and surface smoothness, while the presence of the overlay allowed for a relaxed tolerance during practical fabrication, in favor of high fidelity with the design. The origin of the perfect absorption pertaining to zero reflection was elucidated by referring to the optical admittance. We also explored a suite of perfect absorbers with varying thicknesses. An angle insensitive performance, which is integral to such a flexible optical device, was experimentally identified. Consequently, the proposed thin-film absorber featured an enhanced Q-factor in conjunction with a wide angle of acceptance. It is anticipated that our absorber can facilitate seminal applications encompassing advanced sensors and absorption filtering devices geared for smart camouflage and stealth.
Collapse
Affiliation(s)
- Chul-Soon Park
- Nano Device Application Center, Kwangwoon University, 20 Kwangwoon-ro, Nowon-gu, Seoul, 01897, South Korea
| | - Sang-Shin Lee
- Nano Device Application Center, Kwangwoon University, 20 Kwangwoon-ro, Nowon-gu, Seoul, 01897, South Korea.
- Department of Electronic Engineering, Kwangwoon University, 20 Kwangwoon-ro, Nowon-gu, Seoul, 01897, South Korea.
| |
Collapse
|
15
|
Lee J, Kim J, Lee M. High-purity reflective color filters based on thin film cavities embedded with an ultrathin Ge 2Sb 2Te 5 absorption layer. NANOSCALE ADVANCES 2020; 2:4930-4937. [PMID: 36132919 PMCID: PMC9418997 DOI: 10.1039/d0na00626b] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/31/2020] [Accepted: 08/28/2020] [Indexed: 05/02/2023]
Abstract
A thin film cavity formed by stacking metal-insulator-metal (MIM) continuous layers is of significant interest as a lithography-free and scalable color-filtering structure. Such a cavity can selectively transmit a certain frequency range of incident light, thus producing vivid transmission colors. However, the generation of reflection colors with high purity and reflectivity is a challenge because a cavity in reflection mode resonantly absorbs a narrow range of wavelengths and reflects the remaining spectrum. This study shows that highly pure and reflective colors can be obtained by embedding an ultrathin Ge2Sb2Te5 layer within the cavity. Because the MIM structure exhibits a nonuniform intensity distribution across the insulator layer, the approach is to place the Ge2Sb2Te5 layer in a high-intensity region within the insulator and thereby create another absorption band in addition to the cavity resonance mode. When combined with the refractive-index engineering of the metal layer, this approach leads to red, green, and blue colors having a bandwidth of ∼100 nm and a reflection efficiency of 90%. The results of the study may be effectively utilized in numerous applications, including reflective color filters, colorimetric sensors, and surface decorations.
Collapse
Affiliation(s)
- Junho Lee
- Department of Materials Science and Engineering, Yonsei University Seoul 120-749 Korea
| | - Jaeyong Kim
- Department of Materials Science and Engineering, Yonsei University Seoul 120-749 Korea
| | - Myeongkyu Lee
- Department of Materials Science and Engineering, Yonsei University Seoul 120-749 Korea
| |
Collapse
|
16
|
Design of Transparent Metasurfaces Based on Asymmetric Nanostructures for Directional and Selective Absorption. MATERIALS 2020; 13:ma13173751. [PMID: 32854277 PMCID: PMC7504014 DOI: 10.3390/ma13173751] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/18/2020] [Revised: 08/18/2020] [Accepted: 08/19/2020] [Indexed: 11/17/2022]
Abstract
Maximizing the solar heat gain through windows in winter and minimizing the solar radiation entering the room in summer are of great significance for the energy saving of buildings. Here, we present a new idea for transparent metasurfaces, based on asymmetric metal/insulator/metal (MIM) nanostructures, which can be switched back and forth between absorbing and reflecting solar radiation by reversing the sample orientation. Owing to the fundamental mode of a low-quality-factor resonance, a selective near-infrared absorption is obtained with an absorption peak value of 90% upon front illumination. The average solar absorption (45%) is about 10% higher than that (35%) of reported transparent absorbers. The near-infrared light is also strongly and selectively reflected upon back illumination and a reflection peak value above 70% is observed. Meanwhile, the average visible transmission of the metasurface is above 60%, which is about 1.6 times that (36%) of previous transparent metasurface absorbers. In addition, Cu material can replace the noble metals in this work, which will greatly reduce the manufacturing cost. Owing to the attractive properties of directional and selective absorption, passive operation mode, and low cost of the materials, the metasurfaces have promising prospects in building energy saving or other solar applications where surface transparency is desirable.
Collapse
|
17
|
Wide-angle metamaterial absorber with highly insensitive absorption for TE and TM modes. Sci Rep 2020; 10:13638. [PMID: 32788706 PMCID: PMC7423958 DOI: 10.1038/s41598-020-70519-8] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/10/2020] [Accepted: 07/08/2020] [Indexed: 11/18/2022] Open
Abstract
Being incident and polarization angle insensitive are crucial characteristics of metamaterial perfect absorbers due to the variety of incident signals. In the case of incident angles insensitivity, facing transverse electric (TE) and transverse magnetic (TM) waves affect the absorption ratio significantly. In this scientific report, a crescent shape resonator has been introduced that provides over 99% absorption ratio for all polarization angles, as well as 70% and 93% efficiencies for different incident angles up to \documentclass[12pt]{minimal}
\usepackage{amsmath}
\usepackage{wasysym}
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{amsbsy}
\usepackage{mathrsfs}
\usepackage{upgreek}
\setlength{\oddsidemargin}{-69pt}
\begin{document}$$\theta =80^{\circ }$$\end{document}θ=80∘ for TE and TM polarized waves, respectively. Moreover, the insensitivity for TE and TM modes can be adjusted due to the semi-symmetric structure. By adjusting the structure parameters, the absorption ratio for TE and TM waves at \documentclass[12pt]{minimal}
\usepackage{amsmath}
\usepackage{wasysym}
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{amsbsy}
\usepackage{mathrsfs}
\usepackage{upgreek}
\setlength{\oddsidemargin}{-69pt}
\begin{document}$$\theta =80^{\circ }$$\end{document}θ=80∘ has been increased to 83% and 97%, respectively. This structure has been designed to operate at 5 GHz spectrum to absorb undesired signals generated due to the growing adoption of Wi-Fi networks. Finally, the proposed absorber has been fabricated in a \documentclass[12pt]{minimal}
\usepackage{amsmath}
\usepackage{wasysym}
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{amsbsy}
\usepackage{mathrsfs}
\usepackage{upgreek}
\setlength{\oddsidemargin}{-69pt}
\begin{document}$$20 \times 20$$\end{document}20×20 array structure on FR-4 substrate. Strong correlation between measurement and simulation results validates the design procedure.
Collapse
|
18
|
Mohammadi M, Rajabalipanah H, Abdolali A. A theoretical investigation on reciprocity-inspired wide-angle spectrally-selective THz absorbers augmented by anisotropic metamaterials. Sci Rep 2020; 10:10396. [PMID: 32587381 PMCID: PMC7316824 DOI: 10.1038/s41598-020-67399-3] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2019] [Accepted: 06/08/2020] [Indexed: 11/09/2022] Open
Abstract
In this paper, a theoretical framework relying on the reciprocity theorem is proposed to accurately design a spectrally-selective THz superstrate-loaded metamaterial absorber (SLMA) exhibiting wide-angle feature. By leveraging high-order Floquet harmonics in a generalized transmission line model characterizing the conventional metamaterial absorbers (MAs), it is demonstrated that MAs suffer from impedance mismatch, especially at near grazing angles. From an impedance matching viewpoint, this major challenge is tackled in this paper via two different designs, exploiting a magneto-electric anisotropic Huygens' metamaterial and a multilayer dielectric structure at a certain distance over the MA plane. The numerical results corroborate well the theoretical predictions, elucidating that the proposed SLMA significantly broadens the angular performance of the MA up to near grazing angles (about 80°), where high absorptivity is still achieved in both principal planes. The deteriorating effect of diffraction modes has been comprehensively analyzed. In comparison to the previous wide-angle MA reports based on intricate particle geometries and brute-force optimizations, the proposed design features a straightforward semi-analytical algorithm, which can also be re-developed for microwave, mid-infrared, and optical frequency bands and for any type of MA element. The proposed SLMA would be very promising for various wavelength-selective applications such as sensors and imaging.
Collapse
Affiliation(s)
- Mansoureh Mohammadi
- Department of Electrical Engineering, Iran University of Science and Technology, Tehran, 1684613114, Iran.,Applied Electromagnetic Laboratory, School of Electrical Engineering, Iran University of Science and Technology, Tehran, 1684613114, Iran
| | - Hamid Rajabalipanah
- Department of Electrical Engineering, Iran University of Science and Technology, Tehran, 1684613114, Iran.,Applied Electromagnetic Laboratory, School of Electrical Engineering, Iran University of Science and Technology, Tehran, 1684613114, Iran
| | - Ali Abdolali
- Department of Electrical Engineering, Iran University of Science and Technology, Tehran, 1684613114, Iran. .,Applied Electromagnetic Laboratory, School of Electrical Engineering, Iran University of Science and Technology, Tehran, 1684613114, Iran.
| |
Collapse
|
19
|
Alam A, Islam SS, Islam MH, Almutairi AF, Islam MT. Polarization-Independent Ultra-Wideband Metamaterial Absorber for Solar Harvesting at Infrared Regime. MATERIALS 2020; 13:ma13112560. [PMID: 32512784 PMCID: PMC7321479 DOI: 10.3390/ma13112560] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/20/2020] [Revised: 05/30/2020] [Accepted: 06/01/2020] [Indexed: 02/07/2023]
Abstract
This paper presents an ultra-wideband metamaterial absorber for solar harvesting in the infrared regime (220-360 THz) of the solar spectrum. The proposed absorber consists of square-shaped copper patches of different sizes imposed on a GaAs (Gallium arsenide) substrate. The design and simulation of the unit cell are performed with finite integration technique (FIT)-based simulation software. Scattering parameters are retrieved during the simulation process. The constructed design offers absorbance above 90% within a 37.89% relative bandwidth and 99.99% absorption over a vast portion of the investigated frequency range. An equivalent circuit model is presented to endorse the validity of the proposed structure. The calculated result strongly agrees with the simulated result. Symmetrical construction of the proposed unit cell reports an angular insensitivity up to a 35° oblique incidence. Post-processed simulation data confirm that the design is polarization-insensitive.
Collapse
Affiliation(s)
- Asraful Alam
- Department of Electrical and Electronic Engineering, International Islamic University Chittagong, Chittagong 4318, Bangladesh; (S.S.I.); (M.H.I.)
- Department of Electrical, Electronic & Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia
- Correspondence: (A.A.); (A.F.A.); (M.T.I.); Tel.: +60-193-666-192 (M.T.I.)
| | - Sikder Sunbeam Islam
- Department of Electrical and Electronic Engineering, International Islamic University Chittagong, Chittagong 4318, Bangladesh; (S.S.I.); (M.H.I.)
- Space Science Centre (ANGKASA), Institute of Climate Change (IPI), Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia
| | - Md. Hobaibul Islam
- Department of Electrical and Electronic Engineering, International Islamic University Chittagong, Chittagong 4318, Bangladesh; (S.S.I.); (M.H.I.)
| | - Ali F. Almutairi
- Electrical Engineering Department, Kuwait University, Kuwait City 13060, Kuwait
- Correspondence: (A.A.); (A.F.A.); (M.T.I.); Tel.: +60-193-666-192 (M.T.I.)
| | - Mohammad Tariqul Islam
- Department of Electrical, Electronic & Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia
- Correspondence: (A.A.); (A.F.A.); (M.T.I.); Tel.: +60-193-666-192 (M.T.I.)
| |
Collapse
|
20
|
Ichiji N, Otake Y, Kubo A. Spectral and temporal modulations of femtosecond SPP wave packets induced by resonant transmission/reflection interactions with metal-insulator-metal nanocavities. OPTICS EXPRESS 2019; 27:22582-22601. [PMID: 31510547 DOI: 10.1364/oe.27.022582] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/25/2019] [Accepted: 07/01/2019] [Indexed: 06/10/2023]
Abstract
To study the dynamical optical interactions of nano-scaled metal-insulator-metal (MIM) structures in temporal-frequency domain, femtosecond surface plasmon polariton (SPP) wave packets propagate over a surface with a MIM structure. The resonance nature of the SPP-cavity interaction is reflected as strong modulations in the spectra of transmitted and reflected SPP wavepackets, which show peaks and valleys, respectively, corresponding to the MIM cavity's eigenmode. These features indicate that the MIM structure acts as a Fabry-Pérot etalon-type spectrum filter. With appropriate tuning of the resonance frequency of the cavity, one can extract a wave packet with a narrower time duration and temporally shifted intensity peak.
Collapse
|
21
|
Aalizadeh M, Khavasi A, Butun B, Ozbay E. Lithography-free, manganese-based ultrabroadband absorption through annealing-based deformation of thin layers into metal-air composites. OPTICS LETTERS 2019; 44:3598-3601. [PMID: 31305581 DOI: 10.1364/ol.44.003598] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/12/2019] [Accepted: 06/19/2019] [Indexed: 06/10/2023]
Abstract
Fabrication, characterization, and analysis of an ultrabroadband lithography-free absorber is presented. An over 94% average absorption is experimentally achieved in the wavelength range of 450-1400 nm. This ultrabroadband absorption is obtained by a simple annealed trilayer metal-insulator-metal (MIM) configuration. The metal used in the structure is manganese (Mn), which also makes the structure cost-effective. It is shown that the structure retains its high absorption for TM polarization, up to 70 deg, and, for TE polarization, up to 50 deg. Moreover, the physical mechanism behind this broadband absorption is explained. Being both lithography-free and cost-effective, the structure is a perfect candidate for large-area and mass production purposes.
Collapse
|
22
|
Design of planar and wideangle resonant color absorbers for applications in the visible spectrum. Sci Rep 2019; 9:7045. [PMID: 31065016 PMCID: PMC6504864 DOI: 10.1038/s41598-019-43539-2] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/16/2018] [Accepted: 04/26/2019] [Indexed: 11/19/2022] Open
Abstract
We propose a design approach for color absorbers based on a tri-layer metal-dielectric-metal (MDM) planar geometry, which maintains the same color absorbed, over a range of incident angles from 0° to 80° for light with TM polarization. The dielectrics are chosen to satisfy the ideal conditions of resonance. We calculate the ideal thickness of each dielectric layer by using the planar resonance theory. The numerical results show a total absorption above 85% for all colors of the absorber. We analyzed the influence of the of the metallic top layer thickness and we demonstrated the fabrication error tolerance of the proposed absorber. Finally, we present and discuss the physical mechanisms for the coupling of the electromagnetic field and the absorbed optical power in the structure.
Collapse
|
23
|
Facile design of an ultra-thin broadband metamaterial absorber for C-band applications. Sci Rep 2019; 9:468. [PMID: 30679476 PMCID: PMC6346017 DOI: 10.1038/s41598-018-36453-6] [Citation(s) in RCA: 37] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/21/2018] [Accepted: 11/16/2018] [Indexed: 12/02/2022] Open
Abstract
We report a facile design of an ultra-thin broadband metamaterial absorber (MA) for C-band applications by utilizing a single layer of a metal-dielectric-metal structure of FR-4 substrate. The absorption performances are characterized using a numerical method. The proposed MA exhibits the broadband absorption response over the entire C-band spectrum range from 4.0 GHz to 8.0 GHz with absorptivity above 90% and the high absorptivity is remained over 80% for a large incident angle up to 40° under both transverse electric (TE) and transverse magnetic (TM) polarizations over the band. The origin of absorption mechanism is explained by the electric and surface current distributions, which is also supported by the retrieved constitutive electromagnetic parameters, significantly affected by magnetic resonance. In addition, compared with the previous reports, the proposed MA presents a greater practical feasibility in term of low-profile and wide incident angle insensitivity, suggesting that the proposed absorber is a promising candidate for C-band applications.
Collapse
|
24
|
Grishina YV, Kukushkin VI, Solovyev VV, Kukushkin IV. Slow plasmon-polaritons in a bilayer metallic structure revealed by the lower-energy resonances of surface-enhanced Raman scattering. OPTICS EXPRESS 2018; 26:22519-22527. [PMID: 30130943 DOI: 10.1364/oe.26.022519] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/11/2018] [Accepted: 08/03/2018] [Indexed: 06/08/2023]
Abstract
Apart from the main plasmon-polariton resonance of the surface-enhanced Raman scattering (SERS) occurring at 480 - 530 nm, an additional resonance was observed for substrates with two silver layers separated by a dielectric layer which support extra plasmon modes with decreased group velocities. The novel SERS resonance is shifted towards lower energies and has comparable amplitude, its exact energy position being determined by the thickness of the dielectric interlayer. The experimental findings provide a ground for the engineering of SERS-substrates with the spectral position of the additional resonance matched with the photon energy of the pump laser over a fairly wide range of laser wavelengths.
Collapse
|
25
|
Toward Electrically Tunable, Lithography-Free, Ultra-Thin Color Filters Covering the Whole Visible Spectrum. Sci Rep 2018; 8:11316. [PMID: 30054524 PMCID: PMC6063855 DOI: 10.1038/s41598-018-29544-x] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/24/2018] [Accepted: 07/09/2018] [Indexed: 11/19/2022] Open
Abstract
The possibility of real-time tuning of optical devices has attracted a lot of interest over the last decade. At the same time, coming up with simple lithography-free structures has always been a challenge in the design of large-area compatible devices. In this work, we present the concept and the sample design of an electrically tunable, lithography-free, ultra-thin transmission-mode color filter, the spectrum of which continuously covers the whole visible region. A simple Metal-Insulator-Metal (MIM) cavity configuration is used. It is shown that using the electro-optic dielectric material of 4-dimethyl-amino-N-methyl-4-stilbazoliumtosylate (DAST) as the dielectric layer in this configuration enables efficient electrical tuning of the color filter. The total thickness of the structure is 120 nm, so it is ultra-thin. The output color gets tuned from violet to red by sweeping the applied voltage from −12 to +12 Volts (V). We present an in-detail optimization procedure along with a simple calculation method for the resonance wavelength of the MIM cavity that is based on circuit theory. Such power-efficient structures have a large variety of potential applications ranging from optical communication and switching to displays and color-tunable windows.
Collapse
|