Building block and rapid synthesis of catecholamines-inorganic nanoflowers with their peroxidase-mimicking and antimicrobial activities

Silk Industry Waste Protein-Derived Sericin Hybrid Nanoflowers for Antibiotics Remediation via Circular Economy

Hybrid protein-copper nanoflowers have emerged as promising materials with diverse applications in biocatalysis, biosensing, and bioremediation. Sericin, a waste biopolymer from the textile industry, has shown potential for fabricating such nanoflowers. However, the influence of the molecular weight of sericin on nanoflower morphology and peroxidase-like activity remains unexplored. This work focused on the self-assembly of nanoflowers using high- and low-molecular-weight (HMW and LMW) silk sericin combined with copper(II) as an inorganic moiety. The peroxidase-like activity of the resulting nanoflowers was evaluated using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and hydrogen peroxide (H2O2). The findings revealed that high-molecular-weight sericin hybrid nanoflowers (HMW-ShNFs) exhibited significantly higher peroxidase-like activity than low-molecular-weight sericin hybrid nanoflowers (LMW-ShNFs). Furthermore, HMW-ShNFs demonstrated superior reusability and storage stability, thereby enhancing their potential for practical use. This study also explored the application of HMW-ShNF for ciprofloxacin degradation to address the environmental and health hazards posed by this antibiotic in water. The results indicated that HMW-ShNFs facilitated the degradation of ciprofloxacin, achieving a maximum degradation of 33.2 ± 1% at pH 8 and 35 °C after 72 h. Overall, the enhanced peroxidase-like activity and successful application in ciprofloxacin degradation underscore the potential of HMW-ShNFs for a sustainable and ecofriendly remediation process. These findings open avenues for the further exploration and utilization of hybrid nanoflowers in various environmental applications.

Rational design of EDTA-incorporated nanoflowers as novel and effective endodontic disinfection against biofilms

The ethylenediaminetetradiacetic acid (EDTA) is one of the most commonly used irrigation solutions. Although EDTA has a very low antimicrobial property, it is used to remove inorganic part of smear layer in areas of root canal system. Herein, we developed EDTA-incorporated nanoflowers (EDTA NFs), for the first time, as novel and effective irrigation solution with quite high antimicrobial property to provide complete disinfection in root canal system. We both systematically elucidated the formation of the EDTA NFs with various techniques, and their catalytic and antimicrobial activities in the presence of hydrogen peroxide (H2O2) were documented through intrinsic EDTA property and peroxidase-like activities.

Encapsulation of Enzymes into Hydrophilic and Biocompatible Metal Azolate Framework: Improved Functions of Biocatalyst in Cascade Reactions and its Sensing Applications

Multiple enzyme-triggered cascade biocatalytic reactions are vital in vivo or vitro, considering the basic biofunction preservation in living organisms and signals transduction for biosensing platforms. Encapsulation of such enzymes into carrier endows a sheltering effect and can boost catalytic performance, although the selection and preparation of an appropriate carrier is still a concern. Herein, focusing on MAF-7, a category of metal azolate framework (MAF) with superiority against the topologically identical ZIF-8, this enzyme@MAF system can ameliorate the sustainability of encapsulating natural enzymes into carriers. The proposed biocatalyst composite AChE@ChOx@MAF-7/hemin is constructed via one-pot in situ coprecipitation method. Subsequently, MAF-7 is demonstrated to exhibit an excellent capacity of the carrier and protection against external factors in the counterpart of ZIF-8 through encapsulated and free enzymes. In addition, detections for specific substrates or inhibitors with favorable sensitivity are accomplished, indicating that the properties above expectation of different aspects of the established platform are successfully realized. This biofunctional composite based on MAF-7 can definitely provide a potential approach for optimization of cascade reaction and enzyme encapsulation.

Facile Synthesis of Hybrid Nanoflowers Using Glycine and Phenylalanine and Investigation of Their Catalytic Activity

In the context of the proposed work, two different amino acids (Glycine, Phenylalanine) have interacted with copper ions in a phosphate buffer (PBS) in place of enzymes. This interaction resulted in the nucleation of copper phosphate crystals and the formation of flower-shaped amino acid-copper hybrid nanostructures (AA-hNFs), which grew through self-assembly. While Cu (II) ions in the structure of AA-hNFs were used as Fenton's agent for the catalytic activity. SEM, energy dispersive X-ray spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy measurements were used to define the AA-hNFs' characterisation. The peroxidase-like activities of AA-hNFs were investigated by UV/VIS spectrophotometer. Metal nanoparticles have peroxidase-like activity. A class of enzymes known as peroxidases is able to catalyze the conversion of hydrogen peroxide into hydroxyl radicals. These radicals also take part in electron transfers with substrates, which results in color during oxidation. When cupric oxide nanoparticles are added to the peroxidase substrate while H2 O2 is present, a blue color product with a maximum absorbance at=652 nm can result, demonstrating the catalytic activity of a peroxidase. The morphology and composition of AA-hNFs were carefully characterized and the synthesized parameters were optimized systematically. Results showed that the nanoparticles were dispersed with an average diameter of 7-9 μm and indicated a uniform flower shape. The results of the investigation are anticipated to significantly advance a number of technical and scientific sectors.

Formation of Umbilicaria decussata (Antarctic and Turkey) Extracts Based Nanoflowers with Their Peroxidase Mimic, Dye Degradation and Antimicrobial Properties

This work describes a unique and environmentally friendly approach for creating three-dimensional (3D) organic-inorganic flower shaped hybrid nanostructures called "nanoflower (NF)" by using Umbilicaria decussate (U. decussate) extract and copper ions (Cu2+ ). U. decussate species were collected from certain place in Antarctic and Turkey and extraction of each species were completed in methanol and water. The U. decussate extracts were used as organic components and Cu2+ acted as inorganic components for formation of U. decussate extracts based hybrid NFs. We rationally used these NFs as novel nanobiocatalyst and antimicrobial agents. These NFs exhibited peroxidase mimic, dye degradation and antimicrobial properties. The NFs were characterized with various techniques. For instance, the morphologies of the NFs were monitored by scanning electron microscope (SEM), presence of elements in the NFs were presented using Energy Dispersive X-Ray Analysis (EDX). Fourier-transform infrared spectroscopy (FT-IR) was used to elucidate corresponding bending and stretching of bonds in the NFs. The NFs acted as effective Fenton agents in the presence of hydrogen peroxide, and we demonstrated their peroxidase-like activity against guaiacol, dye degradation property towards malachite green and antimicrobial activity for Aeromonas hydrophila, Aeromonas sobria, Escherichia coli, Salmonella enterica and Staphylococcus aureus.

BSA-Cu3(PO4)2 hybrid nanoflower-an efficient and low-cost nanoenzyme for decolorization of organic pollutants

The Fenton reaction is one of the most effective methods for treating organic wastewater, which is extremely harmful to humans but difficult to treat. However, finding simple, low-cost, and efficient catalysts for the Fenton reaction remains a challenge. In this study, a BSA-Cu₃(PO₄)₂ hybrid nanoflower (NF) was synthesized to investigate its peroxidase-like activity for the treatment of organic wastewater. Its morphology, composition, and crystallization had been fully studied and the results confirmed that the NFs were successfully prepared. Subsequently, the origin of the peroxidase-like activity of the NFs was further analyzed, with the results suggesting two reasons: (i) the transformation between Cu(I) and Cu(II) and (ii) nano-effects. Additionally, Congo red was selected as the organic pollutant to simulate the decolorization of wastewater. After 3 h, the decolorization efficiency reached 96%. Furthermore, the NFs exhibited good storage performance, maintaining approximately 90% relative activity after storage for 30 days. In summary, the NFs have great application prospects in the treatment of organic wastewater.

Nanozymes and nanoflower: Physiochemical properties, mechanism and biomedical applications

Natural enzymes possess several drawbacks which limits their application in industries, wastewater remediation and biomedical field. Therefore, in recent years researchers have developed enzyme mimicking nanomaterials and enzymatic hybrid nanoflower which are alternatives of enzyme. Nanozymes and organic inorganic hybrid nanoflower have been developed which mimics natural enzymes functionalities such as diverse enzyme mimicking activities, enhanced catalytic activities, low cost, ease of preparation, stability and biocompatibility. Nanozymes include metal and metal oxide nanoparticles mimicking oxidases, peroxidases, superoxide dismutase and catalases while enzymatic and non-enzymatic biomolecules were used for preparing hybrid nanoflower. In this review nanozymes and hybrid nanoflower have been compared in terms of physiochemical properties, common synthetic routes, mechanism of action, modification, green synthesis and application in the field of disease diagnosis, imaging, environmental remediation and disease treatment. We also address the current challenges facing nanozyme and hybrid nanoflower research and the possible way to fulfil their potential in future.

Anti-microbial, anti-oxidant and wound healing capabilities of Aloe vera-incorporated hybrid nanoflowers

The active ingredients of Aloe vera have attracted attention for their potential use in nanotechnology-based medical applications and biomaterial production. It has many therapeutic applications in modern world. This study used Aloe vera extract in different concentrations to synthesize Aloe vera-incorporated hybrid nanoflowers (AV-Nfs). The most uniform morphology in the nanoflowers obtained was at a concentration of 2 mL. The AV-Nfs were well characterized by scanning electron microscopy, X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction (XRD). The highest peroxidase-mimicking activity of the components was 1.488 EU/mg at 60°C and pH 6. The DPPH assay determined the antioxidant activity of the components and the MTT assay tested on CCD-1072Sk fibroblast cell line determined the effect of AV-Nfs on cell proliferation. Separate treatment of AV-Nfs with Cu₃(PO₄)₂·3H₂O significantly increased cell proliferation according to free Aloe vera and CuSO₄. In vitro wound healing results showed that AV-Nfs could significantly close wounds compared to free Aloe vera. In this study, AV-Nfs showed antimicrobial activity against Staphylococcus epidermidis, Enterococcus faecalis, Escherichia coli and Klebsiella pneumoniae at minimum inhibitory concentration of 625 μg/mL, suggesting that AV-Nfs may be used in wound healing applications with enhanced biological properties. AV-Nfs showed no activity against the yeast Candida albicans.

Application of Metal Nanoparticles for Production of Self-Sterilizing Coatings

Metal nanoparticles (NPs) are increasingly being used in many areas, e.g., industry, pharmacy, and biomedical engineering. NPs can be obtained through chemical and biological synthesis or using physical methods. AgNPs, AuNPs, CuNPs, FeNPs, MgNPs, SnO2NPs, TiO2NPs, and ZnONPs are the most commonly synthesized metal nanoparticles. Many of them have anti-microbial properties and documented activity supported by many tests against some species of pathogenic bacteria, viruses, and fungi. AgNPs, which are used for the production of commercial self-sterilizing packages, are one of the best-explored nanoparticles. Moreover, the EFSA has approved the use of small doses of silver nanoparticles (0.05 mg Ag·kg−1) to food products. Recent studies have shown that metal NPs can be used for the production of coatings to prevent the spread of the SARS-CoV-2 virus, which has caused the global pandemic. Some nanoparticles (e.g., ZnONPs and MgONPs) have the Generally Recognized As Safe (GRAS) status, i.e., they are considered safe for consumption and can be used for the production of edible coatings, protecting food against spoilage. Promising results have been obtained in research on the use of more than one type of nanometals, which prevents the development of pathogen resistance through various mechanisms of inactivation thereof.

High throughput virtual screening and molecular dynamics simulation analysis of phytomolecules against BfmR of Acinetobacter baumannii: anti-virulent drug development campaign

Acinetobacter baumannii is a notorious multidrug resistant bacterium responsible for several hospital acquired infections assisted by its capacity to develop biofilms. A. baumannii BfmR (RstA), a response regulator from the BfmR/S two-component signal transduction system, is the major controller of A. baumannii biofilm development and formation. As a result, BfmR represents a novel target for anti-biofilm treatment against A. baumannii. The discovery of the high-resolution crystal structure of BfmR provides a good chance for computational screening of its probable inhibitors. Therefore, in this study we aim to search new, less toxic, and natural BfmR inhibitors from 8450 phytomolecules available in the Indian Medicinal Plants, Phytochemistry and Therapeutic (IMPPAT) database by analyzing molecular docking against BfmR (PDB ID: 6BR7). Out of these 8450 phytomolecules 6742 molecules were successfully docked with BfmR with the docking score range -6.305 kcal/mol to +5.120 kcal/mol. Structure based-molecular docking (SB-MD) and ADMET (absorption, distribution, metabolism, excretion, & toxicity) profile examination revealed that Norepinephrine, Australine, Calystegine B3, 7,7 A-Diepialexine, and Alpha-Methylnoradrenaline phytocompounds strongly binds to the active site residues of BfmR. Furthermore, molecular dynamics simulation (MDS) studies for 100 ns and the binding free energy (MM/GBSA) analysis elucidated the binding mechanism of Calystegine B3, 7,7 A-Diepialexine, and Alpha-Methylnoradrenaline to BfmR. In summary, these phytocompounds seems to have the promising molecules against BfmR, and thus necessitates further verification by both in vitro and in vivo experiments. HighlightsBfmR plays a key role in biofilm development and exopolysaccharide (EPS) synthesis in A. baumannii.Computational approach to search for promising BfmR inhibitors from IMPAAT database.The lead phytomolecules such as Calystegine B3, 7,7 A-Diepialexine, and Alpha-Methylnoradrenaline displayed significant binding with BfmR active site.The outcome of BfmR binding phytomolecules has broadened the scope of hit molecules validation.Communicated by Ramaswamy H. Sarma.

Anti-Amyloidogenic and Fibril-Disaggregating Potency of the Levodopa-Functionalized Gold Nanoroses as Exemplified in a Diphenylalanine-Based Amyloid Model

The phenomenon of proteins/peptide assembly into amyloid fibrils is associated with various neurodegenerative and age-related human disorders. Inhibition of the aggregation behavior of amyloidogenic peptides/proteins or disruption of the pre-formed aggregates is a viable therapeutic option to control the progression of various protein aggregation-related disorders such as Alzheimer's disease (AD). In the current work, we investigated both the amyloid inhibition and disaggregation proclivity of levodopa-functionalized gold nanoroses (GNRs) against various peptide-based amyloid models, including the amyloid beta peptide [Aβ (1-42) and Aβ (1-40)] and the dipeptide phenylalanine-phenylalanine (FF). Our results depicted the anti-aggregation behavior of the GNR toward FF and both forms of Aβ-derived fibrils. The peptides demonstrated a variation in their fiber-like morphology and a decline in thioflavin T fluorescence after being co-incubated with the GNR. We further demonstrated the neuroprotective effects of the GNR in neuroblastoma cells against FF and Aβ (1-42) fiber-induced toxicity, exemplified both in terms of regaining cellular viability and reducing production of reactive oxygen species. Overall, these findings support the potency of the GNR as a promising platform for combating AD.

Recent Advances in Metal-Based Antimicrobial Coatings for High-Touch Surfaces

International interest in metal-based antimicrobial coatings to control the spread of bacteria, fungi, and viruses via high contact human touch surfaces are growing at an exponential rate. This interest recently reached an all-time high with the outbreak of the deadly COVID-19 disease, which has already claimed the lives of more than 5 million people worldwide. This global pandemic has highlighted the major role that antimicrobial coatings can play in controlling the spread of deadly viruses such as SARS-CoV-2 and scientists and engineers are now working harder than ever to develop the next generation of antimicrobial materials. This article begins with a review of three discrete microorganism-killing phenomena of contact-killing surfaces, nanoprotrusions, and superhydrophobic surfaces. The antimicrobial properties of metals such as copper (Cu), silver (Ag), and zinc (Zn) are reviewed along with the effects of combining them with titanium dioxide (TiO₂) to create a binary or ternary contact-killing surface coatings. The self-cleaning and bacterial resistance of purely structural superhydrophobic surfaces and the potential of physical surface nanoprotrusions to damage microbial cells are then considered. The article then gives a detailed discussion on recent advances in attempting to combine these individual phenomena to create super-antimicrobial metal-based coatings with binary or ternary killing potential against a broad range of microorganisms, including SARS-CoV-2, for high-touch surface applications such as hand rails, door plates, and water fittings on public transport and in healthcare, care home and leisure settings as well as personal protective equipment commonly used in hospitals and in the current COVID-19 pandemic.

Synthesis of taurine-Cu3(PO4)2 hybrid nanoflower and their peroxidase-mimic and antimicrobial properties

Herein, we report the synthesis of taurine incorporated (sulfur containing organic molecule derived from methionine and cysteine) hybrid nanoflowers (thNFs) with an intrinsic peroxidase-mimic and antimicrobial activities in the presence of H₂O₂. Formation of thNFs using non-enzyme molecules was for the first time and systematically studied as a function of the taurine concentration, types of metal ions (Cu²⁺, Fe²⁺ and Fe³⁺) and pH values of reaction solution. The peroxidase like activities of thNFs rely on Fenton-like reaction against guaiacol used as a model substrate. The efficiency of Fenton reaction can be attributed to porous structure and presence of ions of transition elements in the thNFs. The thNFs were further characterized using FTIR, XRD, SEM and EDX. The thNFs also showed remarkable antimicrobial properties against S. aureus, E. coli, B. cereus and C. albicans. We claim that nonprotein-based NFs can be considered as new generation nano-biocatalysts as an alternative to enzymes and can be used in various medicinal, biochemical, immunological, biotechnological, and industrial applications.

Organic-inorganic epoxide hydrolase hybrid nanoflowers with enhanced catalytic activity: Hydrolysis of styrene oxide to 1-phenyl-1,2-ethanediol

Epoxide hydrolases are ubiquitous in nature and are utilized to catalyze the cofactor-independent hydrolysis of epoxides to their corresponding diols. These enzymes have tremendous potential and have been applied in the synthesis of bulk and fine chemical industry and utilized as chiral building blocks. Herein, we report a green, facile, and economical method for immobilization of epoxide hydrolase based on biomimetic mineralization. The organic-inorganic hybrid nanoflowers have received tremendous attention due to their higher catalytic activity and stability. The nanoflowers were synthesized, with the organic component being enzyme epoxide hydrolase and the inorganic component being Ca²⁺ ions. A unique hierarchical flower-like spherical structure with hundreds of spiked petals was observed. The synthesized nanoflowers were applied for styrene oxide hydrolysis, producing 1-phenyl-1,2-ethanediol. Further, the factors influencing the morphology, catalytic activity, and stability studies were performed to study the activity recovery of the synthesized organic-inorganic hybrid epoxide hydrolase nanoflowers. The findings will have interesting applications.

Immobilized enzymes in inorganic hybrid nanoflowers for biocatalytic and biosensing applications

Enzyme immobilization has been accepted as a powerful technique to solve the drawbacks of free enzymes such as limited activity, stability and recyclability under harsh conditions. Different from the conventional immobilization methods, enzyme immobilization in inorganic hybrid nanoflowers was executed in a biomimetic mineralization manner with the advantages of mild reaction conditions, and thus it was beneficial to obtain ideal biocatalysts with superior characteristics. The key factors influencing the formation of enzyme-based inorganic hybrid nanoflowers were elucidated to obtain a deeper insight into the mechanism for achieving unique morphology and improved properties of immobilized enzymes. To date, immobilized enzymes in inorganic hybrid nanoflowers have been successfully applied in biocatalysis for preparing medical intermediates, biodiesel and biomedical polymers, and solving the environmental or food industrial issues such as the degradation of toxic dyes, pollutants and allergenic proteins. Moreover, they could be used in the development of various biosensors, which provide a promising platform to detect toxic substances in the environment or biomarkers associated with various diseases. We hope that this review will promote the fundamental research and wide applications of immobilized enzymes in inorganic hybrid nanoflowers for expanding biocatalysis and biosensing.

Understanding intricacies of bioinspired organic-inorganic hybrid nanoflowers: A quest to achieve enhanced biomolecules immobilization for biocatalytic, biosensing and bioremediation applications

The immobilization of biomolecules has been a subject of interest for scientists for a long time. The organic-inorganic hybrid nanoflowers are a new class of nanostructures that act as a host platform for the immobilization of such biomolecules. It provides better practical applicability to these functional biomolecules while also providing superior activity and reusability when catalysis is involved. These nanostructures have a versatile and straightforward synthesis process and also exhibit enzyme mimicking activity in many cases. However, this facile synthesis involves many intricacies that require in-depth analysis to fully attain its potential as an immobilization technique. A complete account of all the factors involving the synthesis process optimisation is essential to be studied to make it commercially viable. This paper explores all the different aspects of hybrid nanoflowers which sets them apart from the conventional immobilization techniques while also giving an overview of its wide range of applications in industries.

Biological Nanofactories: Using Living Forms for Metal Nanoparticle Synthesis

Metal nanoparticles are nanosized entities with dimensions of 1-100 nm that are increasingly in demand due to applications in diverse fields like electronics, sensing, environmental remediation, oil recovery and drug delivery. Metal nanoparticles possess large surface energy and properties different from bulk materials due to their small size, large surface area with free dangling bonds and higher reactivity. High cost and pernicious effects associated with the chemical and physical methods of nanoparticle synthesis are gradually paving the way for biological methods due to their eco-friendly nature. Considering the vast potentiality of microbes and plants as sources, biological synthesis can serve as a green technique for the synthesis of nanoparticles as an alternative to conventional methods. A number of reviews are available on green synthesis of nanoparticles but few have focused on covering the entire biological agents in this process. Therefore present paper describes the use of various living organisms like bacteria, fungi, algae, bryophytes and tracheophytes in the biological synthesis of metal nanoparticles, the mechanisms involved and the advantages associated therein.

Comparison Study of Synthesized Red (or Blood) Orange Peels and Juice Extract-Nanoflowers and Their Antimicrobial Properties on Fish Pathogen (Yersinia ruckeri)

Abstract

In this work, we synthesized blood orange peel extract-copper (II) (Cu²⁺) ions nanoflower (NFs) and blood orange juice extract-copper (II) (Cu²⁺) ions nanoflower examine their antimicrobial properties on the fish pathogen (Yersinia ruckeri). The main compounds of the blood orange peel extract and the blood orange juice extract were organic components, and the copper (II) (Cu^{2 +}) ions were inorganic components. BOPE-Cu^{2 +} nanoflowers are quite compact, porous, and uniform as compared to BOJE-Cu²⁺ nanoflowers. Scanning Electron Microscopy, Fourier Transform Infrared spectrometry, and Energy-Dispersive X-ray spectroscopy were used to observe the structures of the NFs. The findings of FT-IR show Cu-O and Cu-N bonds in NF, which may be an indicator of the development of NFs. Although the antimicrobial actions of BOPE-hNFs and BOJE-hNFs against Yersinia ruckeri (NCTC 12,268) have been confirmed.

Graphic Abstract

Pomegranate-Like CuO2@SiO2 Nanospheres as H2O2 Self-Supplying and Robust Oxygen Generators for Enhanced Antibacterial Activity

Reactive oxygen species (ROS)-induced nanosystems represent one of the most essential, efficient, and encouraging nanobactericides for eliminating bacterial infection concerning the increasing resistance threats of existing antibiotics. Among them, Fenton-type metal peroxide nanoparticles are exciting nanomaterials with intriguing physiochemical properties, yet the study of this antimicrobial agent is still in its infancy. Herein, a robust pH-responsive Fenton nanosystem is constructed by the assembly of copper peroxide nanodots in pomegranate-like mesoporous silica nanoshells (CuO₂@SiO₂) that are capable of self-supplying H₂O₂ and sustainably generating O₂. The enhanced antimicrobial performance is attributed to the pH responsiveness and excellent Fenton catalytic activity through either the Cu²⁺-catalyzed conversion of H₂O₂ to detrimental ROS under acid treatment or in situ O₂ evolution in neutral media. Moreover, in vitro and in vivo investigations demonstrate that this nanocomposite can exhibit boosted antimicrobial capabilities and can significantly accelerate skin wound closure, while retaining outstanding cytocompatibility and hemocompatibility. Given its excellent physicochemical and antimicrobial properties, the broad application of this nanocomposite in bacteria-associated wound management is anticipated.

Boosted peroxidase-like activity of metal-organic framework nanoparticles with single atom Fe(Ⅲ) sites at low substrate concentration

Single atom nanomaterials possess catalytic activity like natural enzymes are termed as SAzymes which have gained great attention during last two years because of the maximal utilization of atoms and the benefit of understanding structure-property relationship. However, most of SAzymes are fabricated based on hydrophobic carbon, which disperse poorly in water and exhibit inferior affinity towards substrates, which may limit their biomedical applications. Here, we report a peroxidase-like SAzyme through the post-modification route based on hydrophilic defective metal-organic frameworks. Hydrochloric acid (HCl) is employed as ligand modulator to fabricate defective NH₂-UiO-66 nanoparticles (HCl-NH₂-UiO-66 NPs). Compared with the NPs fabricated through acetic acid modulation method (Ac-NH₂-UiO-66 NPs), HCl-NH₂-UiO-66 NPs have more missing linkers. Hence, more Fe(Ⅲ) ions can be successfully doped onto Zr₆ clusters in HCl-NH₂-UiO-66 NPs in a single atom state via formation of Fe-O-Zr bridge. The HCl-NH₂-UiO-66 NPs doped with Fe(Ⅲ) ions (Fe-HCl-NH₂-UiO-66 NPs) possess higher peroxidase-like activity than Fe-Ac-NH₂-UiO-66 NPs due to the higher loading amount of Fe. Besides, both Fe-HCl-NH₂-UiO-66 NPs and Fe-Ac-NH₂-UiO-66 NPs exhibit lower Michaelis-Menten constants (K_m) for hydrogen peroxide (H₂O₂) than most reported nanomaterials, indicating their higher affinity to H₂O₂. Due to their excellent catalytic activity to low concentration of substrates, Fe-HCl-NH₂-UiO-66 NPs can detect H₂O₂ with a limit of detection (LOD) of 1.0 μM. Thus, our system can be used to detect the low cellular H₂O₂ concentration. With high peroxidase-like activity induced by plenty of single atom Fe(Ⅲ) sites, Fe-HCl-NH₂-UiO-66 NPs can also find wide applications in other fields including nanomedicine, pollution degradation and catalysis.

Flower-Like Superstructures: Structural Features, Applications and Future Perspectives

Mimicking natural objects such as flowers, is an objective of scientists not only because of their attractive appearance, but also to understand the natural phenomena that underpin real world applications such as drug delivery, enzymatic reactions, electronics, and catalysis, to name few. This article reviews the types, preparation methods, and structural features of flower-like structures along with their key applications in various fields. We discuss the various types of flower-like structures composed of inorganic, organic-inorganic hybrid, inorganic-protein, inorganic-enzyme and organic compositions. We also discuss recent development in flower-like structures prepared by self-assembly approaches. Finally, we conclude our review with the future prospects of flower-like micro-structures in key fields, being biomedicine, sensing and catalysis.

Highly Efficient Antimicrobial Activity of CuxFeyOz Nanoparticles against Important Human Pathogens

The development of innovative antimicrobial materials is crucial in thwarting infectious diseases caused by microbes, as drug-resistant pathogens are increasing in both number and capacity to detoxify the antimicrobial drugs used today. An ideal antimicrobial material should inhibit a wide variety of bacteria in a short period of time, be less or not toxic to normal cells, and the fabrication or synthesis process should be cheap and easy. We report a one-step microwave-assisted hydrothermal synthesis of mixed composite Cu_xFe_yO_z (Fe₂O₃/Cu₂O/CuO/CuFe₂O) nanoparticles (NPs) as an excellent antimicrobial material. The 1 mg/mL Cu_xFe_yO_z NPs with the composition 36% CuFeO₂, 28% Cu₂O and 36% Fe₂O₃ have a general antimicrobial activity greater than 5 log reduction within 4 h against nine important human pathogenic bacteria (including drug-resistant bacteria as well as Gram-positive and Gram-negative strains). For example, they induced a >9 log reduction in Escherichia coli B viability after 15 min of incubation, and an ~8 log reduction in multidrug-resistant Klebsiella pneumoniae after 4 h incubation. Cytotoxicity tests against mouse fibroblast cells showed about 74% viability when exposed to 1 mg/mL Cu_xFe_yO_z NPs for 24 h, compared to the 20% viability for 1 mg/mL pure Cu₂O NPs synthesized by the same method. These results show that the Cu_xFe_yO_z composite NPs are a highly efficient, low-toxicity and cheap antimicrobial material that has promising potential for applications in medical and food safety.

Facile strategy for immobilizing horseradish peroxidase on a novel acetate functionalized ionic liquid/MWCNT matrix for electrochemical biosensing

Facile yet simple platforms for the immobilization of biomolecules have always been a substantial requirement for the fabrication of proficient biosensors. In this study, we report a naphthyl substituted acetate functionalized ionic liquid (NpAc-IL) for the covalent anchoring of horseradish peroxidase (HRP), using which the direct electrochemistry of HRP was successfully accomplished and a H₂O₂ biosensor was developed. The naphthyl substitution on the NpAc-IL was utilized for the π-π stacking with the MWCNT modified GCE and the terminal -OCH₃ group of NpAc-IL was used for the covalent attachment with the free -NH₂ group of HRP via amide bond formation. High conducting nature of the newly designed ionic liquid (NpAc-IL), facilitated an improved communication with the deeply buried redox centre of the HRP, while the covalent bonding provided enhanced stability to the fabricated biosensor by stably holding the water soluble HRP enzyme on the electrode surface. Furthermore, incorporation of MWCNT on the sensor setup synergistically enhanced the sensitivity of the developed biosensor. Under optimized conditions, the fabricated biosensor showed an enhanced electrocatalytic reduction of H₂O₂ in the range of 0.01 to 2.07 mM with a limit of detection and sensitivity of 2.7 μM and 55.98 μA mM^-1 cm^-2 respectively. Further, the proposed biosensor was utilized for the sensing of H₂O₂ spiked in real samples. Moreover, the newly fabricated biosensor demonstrated excellent stability with improved sensitivity and selectivity towards H₂O₂ reduction. The superior analytical characteristics are attributed to the facile fabrication strategy using this newly developed acetate functionalized ionic liquid platform.

Paper-based biosensor based on phenylalnine ammonia lyase hybrid nanoflowers for urinary phenylalanine measurement

The Phenylketonuria (PKU) is an inborn defect of phenylalanine (Phe) metabolism, in which Phe accumulated in the blood causing alterations at the central nervous system. Therefore, the detection of PKU is very important for the early diagnosis of PKU patients. However, existing tests for PKU are time-consuming and require high-resource laboratories. In this study, a novel paper-based biosensor based on phenylalnine ammonia lyase (PAL) hybrid nanoflowers was constructed that provides a semi-quantitative output of the concentration of Phe from urine samples. PAL@Ca₃(PO₄)₂ hybrid nanoflowers (PAL@NF) were first prepared using PAL and Ca²⁺. Synthesis conditions of the PAL@NF on the formation of the PAL@NF were optimized. The PAL@NF exhibited 90% activity recovery under optimal condition. Compared with free PAL, the PAL@NF displayed good storage stability and increased tolerance to proteolysis. After five consecutive operating cycles, the PAL@NF still retained 73% of its initial activity, indicating excellent reusability. Furthermore, the paper-based biosensor was able to detect Phe concentration in urine samples, and exhibited good linearity to the Phe concentrations in the range from 60 to 2400 μM and the response time was only about 10 min. Therefore, the paper-based biosensor can be a promising candidate as a biosensor for the detection of PKU.

Gallic acid nanoflower immobilized membrane with peroxidase-like activity for m-cresol detection

We report fabrication of new generation nanoflowers (NFs) using gallic acid (GA) and copper (II) ions (Cu2+) acted as an organic and inorganic component, respectively with effective peroxidase mimic activities in solution and on filter membrane. Unlike the typical protein NFs synthesis mechanism, gallic acid NFs (GA-NFs) was formed via coordination reaction between carboxyl groups of GA and Cu2+. The different morphologies of the GA-NFs were acquired based upon whether the carboxyl groups in gallic acid are active or not. The peroxidase mimic activity of the GA-NFs relied on the Fenton reaction in the presence of hydrogen peroxide (H2O2) was tested towards m-cresol as a function of concentration of the GA-NFs, m-cresol, H2O2 and reaction time. Under the optimized conditions, the oxidative coupling of m-cresol with 4-aminoantipyrine (4-AAP) was catalyzed by the GA-NFs dispersed in solution and adsorbed on filter paper to form an antipyrine dye and it was visually and spectrophotometrically recorded. The m-cresol with range of 0.05-0.5 mM was detected in 10 min and 15 min by using the GA-NFs in solution and on filter paper, respectively. We demonstrated that the NFs can be produced from non-protein molecules and GA-NFs can be used as a promising nanocatalyst for a variety of applications.

Peroxidase-like activity and antimicrobial properties of curcumin-inorganic hybrid nanostructure

For the first time in this study, curcumin was utilized as an organic component reacting with Cu (II) ion (Cu2+) as an inorganic component for fabrication of curcumin based Cu hybrid nanostructure (Cu-hNs). We also systematically examined the catalytic effect towards guaiacol and antimicrobial activities of Cu-hNs towards fish pathogen bacteria. For the characterization of Cu-hNs, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectrometry (FT-IR) analysis were used. We claimed that hydroxyl group might react with Cu2+ in phosphate solution (PO4 -3) to form Cu-hNs. However, more uniform and spherical Cu-hNs were not seen owing to absence of more reactive functional groups like amine and carboxyl groups on structure of curcumin. In addition to our findings, synthesis of Cu-hNs were carried out in the various pH values to evaluate the effect of pHs on formation of Cu-hNs. The Cu-hNs exhibited remarkable catalytic activity throught the Fenton reaction in the presence of hydrogen peroxide (H2O2) and effective antimicrobial activities against Gram-positive/negative fish pathogen bacteria. In this study, cheap and efficient synthesis of nanoflowers (NFs) using plant extracts is proposed for biomedical applications rather than expensive molecules such as amino acids and DNA.

Green synthesis of allicin based hybrid nanoflowers with evaluation of their catalytic and antimicrobial activities

OBJECTIVE

Although organic-inorganic hybrid nanoflowers (hNFs) with much enhanced catalytic activity and stability were fabricated using proteins and enzymes, in this study, for the first time, we report synthesis of allicin and copper ion (Cu²⁺) coordinated NFs and investigate their peroxidase-like and antimicrobial activities.

RESULTS

The allicin (active ingredient of Allium sativum) and Cu²⁺ was acted as an organic and inorganic part, respectively for synthesis of the Cu-hNFs. The hNFs were characterized by various techniques. Spherical, uniform, mono-dispersed and flower-like-shaped morphology of the hNFs (synthesized at pH 5) were imaged by scanning electron microscopy. The presence of Cu metal in the hNFs was detected by energy dispersive X-ray spectroscopy. Characteristic bonds stretching and bending for structural analysis of the hNFs were carried out by Fourier transform infrared spectrometry. In terms of applications, the hNFs showed quite effective peroxidase-like activity towards to guaiacol (used as a model substrate) in the presence of hydrogen peroxide (H₂O₂) through Fenton reaction. We demonstrated that the NFs exhibited ~ 200% and ~ 500% higher catalytic activities in 1 h (hr) and 3 h (hrs) than their initial catalytic activity measured in 5 minute (min). Additionally, effective antibacterial properties of the Cu-hNFs were observed against fish pathogen bacteria (Aeromonas hydrophila, Vibrio parahaemolyticus, and Lactococcus garvieae).

CONCLUSIONS

We finally demonsrated that allicin based hybrid nanomaterial can be prepared by a relatively cheap, one step, easy and eco-friendly method. The allicin hNFs can be considered as novel Fenton agent for peroxidase like activity and bactericidal.