Confined local oxygen gas promotes electrochemical water oxidation to hydrogen peroxide

Stable production of hydrogen peroxide over zinc oxide @ zeolitic imidazolate Framework-8 composite catalysts

A promising method of producing hydrogen peroxide (H2O2) is the electrochemical two-electron water oxidation reaction (2e- WOR). In this process, it is important to design electrocatalysts that are both earth abundant and environmentally friendly, as well as offering high stability and production rates. The research of WOR catalysts, such as the extensively used transition metal oxides, is mainly focused on the modification of transition metal elements. Few studies pay attention to the protective heterostructure of metal oxides. Here, we demonstrate for the first time an organometallic skeleton protection strategy to develop highly stable WOR catalysts for H2O2 generation. Unlike the pure ZnO and zeolite imidazole framework-8 (ZIF-8) catalysts, ZnO@ZIF-8 enabled the production of hydrogen peroxide at high voltages. The experimental results demonstrate that the ZnO@ZIF-8 catalyst stably generates H2O2 even under a high voltage of 3.0 V vs. RHE, with a yield reaching 2845.819 μmolmin-1 g-1. ZnO@ZIF-8 shows a relatively low overpotential, with a current density of 10 mA cm-2 and an overpotential of 110 mV. The ZnO@ZIF-8 catalyst's maximal FE value was 4.72 %. Moreover, the ZnO@ZIF-8 catalyst exhibits remarkable durability even after an extended 60-hour stability test. Operando Raman and theoretic calculation analyses reveal that the metal-organic skeleton being encapsulated on the metal oxide surface synergizes with each other, not only expanding the electrochemical surface area, but also adjusting the catalyst metal sites' adsorption capacity. A novel approach to the modification of 2e- WOR metal oxide catalyst is presented in this work.

Proton-Enriched Alginate-Graphene Hydrogel Microreactor for Enhanced Hydrogen Peroxide Photosynthesis

Efficient synthesis of H2O2 via photocatalytic oxygen reduction without sacrificial agents is challenging due to inadequate proton supply from water and difficulty in maintaining O-O bond during O2 activation. Herein, we developed a straightforward strategy involving a proton-rich hydrogel cross-linked by metal ions [M(n)], which is designed to facilitate the selective production of H2O2 through proton relay and metal ion-assisted detachment of crucial intermediates. The hydrogel comprises CdS/graphene and alginate cross-linked by metal ions via O=C-O-M(n) bonds. Efficient O2 reduction and hydrogenation occurred, benefitting from the collaboration between proton-rich alginate and the photocatalytically active CdS/graphene. Meanwhile, the O=C-O-M(n) bonds enhance the electron density of α-carbon sites on graphene, crucial for O2 activation and *OOH intermediate detachment, preventing deeper O-O bond cleavage. The role of metal ions in promoting *OOH desorption was demonstrated through Lewis acidity-dependent activity, with Y(III) having the highest activity, followed by Lu(III), La(III), and Ca(II).

Enhanced Electron Delocalization Induced by Ferromagnetic Sulfur doped C3N4 Triggers Selective H2O2 Production

For the 2D metal-free carbon catalysts, the atomic coplanar architecture enables a large number of pz orbitals to overlap laterally, thus forming π-electron delocalization, and the delocalization degree of the central atom dominates the catalytic activity. Herein, designing sulfur-doped defect-rich graphitic carbon nitride (S-Nv-C3N4) materials as a model, we propose a strategy to promote localized electron polarization by enhancing the ferromagnetism of ultra-thin 2D carbon nitride nanosheets. The introduction of sulfur (S) further promotes localized ferromagnetic coupling, thereby inducing long-range ferromagnetic ordering and accelerating the electron interface transport. Meanwhile, the hybridization of sulfur atoms breaks the symmetry and integrity of the unit structure, promotes electron enrichment and stimulating electron delocalization at the active site. This optimization enhances the *OOH desorption, providing a favorable kinetic pathway for the production of hydrogen peroxide (H2O2). Consequently, S-Nv-C3N4 exhibits high selectivity (>95 %) and achieves a superb H2O2 production rate, approaching 4374.8 ppm during continuous electrolysis over 300 hour. According to theoretical calculation and in situ spectroscopy, the ortho-S configuration can provide ferromagnetic perturbation in carbon active centers, leading to the electron delocalization, which optimizes the OOH* adsorption during the catalytic process.

Anodic H2O2 Generation in Carbonate-Based Electrolytes-Mechanistic Insight from Scanning Electrochemical Microscopy

For the anodic H2O2 generation, it has been shown that the electrolyte composition can steer the reaction pathway toward increased H2O2 generation. Previous efforts made on composition optimization found that the impact of the molar fraction of carbonate species varies for different anodes, and therefore, controversies remain concerning the reaction pathways as well as the species involved in H2O2 formation. Considering that water oxidation results in the liberation of protons within the anode microenvironment, the corresponding acidification would cause an equilibrium shift between carbonate species, which in turn may modulate the reaction pathway. We determined the changes in the fraction of carbonate species in the vicinity of an anode by performing local pH measurements using a Au nanoelectrode positioned in close proximity to an operating anode by shear-force scanning electrochemical microscopy (SECM). It could be confirmed that the main anionic species at the interface is HCO3 -, at potentials where H2O2 is preferentially formed, regardless of the pH value in the bulk. The simultaneous use of a Au-Pt double barrel microelectrode in generator-collector SECM measurements demonstrates that the local HCO3 - concentration is collectively determined by the oxidation current, buffer capacity, and bulk pH of the electrolyte.

Surface molecular pump enables ultrahigh catalyst activity

The performance of electrocatalysts is critical for renewable energy technologies. While the electrocatalytic activity can be modulated through structural and compositional engineering following the Sabatier principle, the insufficiently explored catalyst-electrolyte interface is promising to promote microkinetic processes such as physisorption and desorption. By combining experimental designs and molecular dynamics simulations with explicit solvent in high accuracy, we demonstrated that dimethylformamide can work as an effective surface molecular pump to facilitate the entrapment of oxygen and outflux of water. Dimethylformamide disrupts the interfacial network of hydrogen bonds, leading to enhanced activity of the oxygen reduction reaction by a factor of 2 to 3. This strategy works generally for platinum-alloy catalysts, and we introduce an optimal model PtCuNi catalyst with an unprecedented specific activity of 21.8 ± 2.1 mA/cm2 at 0.9 V versus the reversible hydrogen electrode, nearly double the previous record, and an ultrahigh mass activity of 10.7 ± 1.1 A/mgPt.

Anionic Surfactant-Modulated Electrode-Electrolyte Interface Promotes H2O2 Electrosynthesis

Conventional strategies for highly selective and active hydrogen peroxide (H2O2) electrosynthesis primarily focus on catalyst design. Electrocatalytic reactions take place at the electrified electrode-electrolyte interface. Well-designed electrolytes, when combined with commercial catalysts, can be directly applied to high-efficiency H2O2 electrosynthesis. However, the role of electrolyte components is equally crucial but is significantly under-researched. In this study, anionic surfactant n-tetradecylphosphonic acid (TDPA) and its analogs are used as electrolyte additives to enhance the selectivity of the two-electron oxygen reduction reaction. Mechanistic studies reveal that TDPA assembled over the electrode-electrolyte interface modulates the electrical double-layer structure, which repels interfacial water and weakens the hydrogen-bond network for proton transfer. Additionally, the hydrophilic phosphonate moiety affects the coordination of water molecules in the solvation shell, thereby directly influencing the proton-coupled kinetics at the interface. The TDPA-containing catalytic system achieves a Faradaic efficiency of H2O2 production close to 100% at a current density of 200 mA cm-2 using commercial carbon black catalysts. This research provides a simple strategy to enhance H2O2 electrosynthesis by adjusting the interfacial microenvironment through electrolyte design.

Bioinspired Tetranuclear Manganese Cubane Complex as an Efficient Molecular Electrocatalyst for Two-Electron Water Oxidation Towards Hydrogen Peroxide

Stable homogeneous two-electron water oxidation electrocatalysts are highly demanded to understand the precise mechanism and reaction intermediates of electrochemical H2O2 production. Here we report a tetranuclear manganese complex with a cubane structure which can electrocatalyze water oxidation to hydrogen peroxide under alkaline and neutral conditions. Such a complex demonstrates an optimal Faradaic efficiency (FE) of 87 %, which is amongst (if not) the highest FE(H2O2) of reported homogeneous and heterogeneous electrocatalysts. In addition, active species were identified and co-catalysts were excluded through ESI-MS characterization. Furthermore, we identified water binding sites and isolated one-electron oxidation intermediate by chemical oxidation of the catalyst in the presence of water substrates. It is evident that efficient proton-accepting electrolytes avoid rapid proton building-up at electrode and substantially improve reaction rate and selectivity. Accordingly, we propose a two-electron catalytic cycle model for water oxidation to hydrogen peroxide with the bioinspired molecular electrocatalyst. The present work is expected to provide an ideal platform to elucidate the two-electron WOR mechanism at the atomic level.

Advanced Nanocarbons Toward two-Electron Oxygen Electrode Reactions for H2O2 Production and Integrated Energy Conversion

Hydrogen peroxide (H2O2) plays a pivotal role in advancing sustainable technologies due to its eco-friendly oxidizing capability. The electrochemical two-electron (2e-) oxygen reduction reaction and water oxidation reaction present an environmentally green method for H2O2 production. Over the past three years, significant progress is made in the field of carbon-based metal-free electrochemical catalysts (C-MFECs) for low-cost and efficient production of H2O2 (H2O2EP). This article offers a focused and comprehensive review of designing C-MFECs for H2O2EP, exploring the construction of dual-doping configurations, heteroatom-defect coupling sites, and strategic dopant positioning to enhance H2O2EP efficiency; innovative structural tuning that improves interfacial reactant concentration and promote the timely release of H2O2; modulation of electrolyte and electrode interfaces to support the 2e- pathways; and the application of C-MFECs in reactors and integrated energy systems. Finally, the current challenges and future directions in this burgeoning field are discussed.

In-Plane Topological-Defect-Enriched Graphene as an Efficient Metal-Free Catalyst for pH-Universal H2O2 Electrosynthesis

Developing efficient metal-free catalysts to directly synthesize hydrogen peroxide (H2O2) through a 2-electron (2e) oxygen reduction reaction (ORR) is crucial for substituting the traditional energy-intensive anthraquinone process. Here, in-plane topological defects enriched graphene with pentagon-S and pyrrolic-N coordination (SNC) is synthesized via the process of hydrothermal and nitridation. In SNC, pentagon-S and pyrrolic-N originating from thiourea precursor are covalently grafted onto the basal plane of the graphene framework, building unsymmetrical dumbbell-like S─C─N motifs, which effectively modulates atomic and electronic structures of graphene. The SNC catalyst delivers ultrahigh H2O2 productivity of 8.1, 7.3, and 3.9 mol gcatalyst -1 h-1 in alkaline, neutral, and acidic electrolytes, respectively, together with long-term operational stability in pH-universal electrolytes, outperforming most reported carbon catalysts. Theoretical calculations further unveil that defective S─C─N motifs efficiently optimize the binding strength to OOH* intermediate and substantially diminish the kinetic barrier for reducing O2 to H2O2, thereby promoting the intrinsic activity of 2e-ORR.

Surface Redox Chemistry Regulates the Reaction Microenvironment for Efficient Hydrogen Peroxide Generation

Electrosynthesis has emerged as an enticing solution for hydrogen peroxide (H2O2) production. However, efficient H2O2 generation encounters challenges related to the robust gas-liquid-solid interface within electrochemical reactors. In this work, we introduce an effective hydrophobic coating modified by iron (Fe) sites to optimize the reaction microenvironment. This modification aims to mitigate radical corrosion through Fe(II)/Fe(III) redox chemistry, reinforcing the reaction microenvironment at the three-phase interface. Consequently, we achieved a remarkable yield of up to 336.1 mmol h-1 with sustained catalyst operation for an extensive duration of 230 h at 200 mA cm-2 without causing damage to the reaction interface. Additionally, the Faradaic efficiency of H2O2 exceeded 90% across a broad range of test current densities. This surface redox chemistry approach for manipulating the reaction microenvironment not only advances long-term H2O2 electrosynthesis but also holds promise for other gas-starvation electrochemical reactions.

Hydrophobicity Promoted Efficient Hydroxyl Radical Generation in Visible-Light-Driven Photocatalytic Oxidation

Hydroxyl radical (•OH) with strong oxidation capability is one of the most important reactive oxygen species. The generation of •OH from superoxide radicals (•O2 -) is an important process in visible-light-driven photocatalysis, but the conversion generally suffers from slow reaction kinetics. Here, a hydrophobicity promoted efficient •OH generation in a visible-light-driven semiconductor-mediated photodegradation reaction is reported. Hydrophobic TiO2 that is synthesized by modifying the TiO2 surface with a thin polydimethylsiloxane (PDMS) layer and rhodamine B (RhB) are used as model semiconductors and dye molecules, respectively. The surface hydrophobicity resulted in the formation of a solid-liquid-air triphase interface microenvironment, which increased the local concentration of O2. In the meanwhile, the saturated adsorption quantity of RhB on hydrophobic TiO2 is improved by five-fold than that on untreated TiO2. These advantages increased the density of the conduction band photoelectrons and •O2 - generation, and stimulated the conversion of •O2 - to •OH. This consequently not only increased the kinetics of the photocatalytic reaction by an order of magnitude, but also altered the oxidation route from conventional decolorization to mineralization. This study highlights the importance of surface wettability modulation in boosting •OH generation in visible-light-driven photocatalysis.

Reduction of precious metal ions in aqueous solutions by contact-electro-catalysis

Precious metals are core assets for the development of modern technologies in various fields. Their scarcity poses the question of their cost, life cycle and reuse. Recently, an emerging catalysis employing contact-electrification (CE) at water-solid interfaces to drive redox reaction, called contact-electro-catalysis (CEC), has been used to develop metal free mechano-catalytic methods to efficiently degrade refractory organic compounds, produce hydrogen peroxide, or leach metals from spent Li-Ion batteries. Here, we show ultrasonic CEC can successfully drive the reduction of Ag(ac), Rh3+, [PtCl4]2-, Ag+, Hg2+, Pd2+, [AuCl4]-, and Ir3+, in both anaerobic and aerobic conditions. The effect of oxygen on the reaction is studied by electron paramagnetic resonance (EPR) spectroscopy and ab-initio simulation. Combining measurements of charge transfers during water-solid CE, EPR spectroscopy and gold extraction experiments help show the link between CE and CEC. What's more, this method based on water-solid CE is capable of extracting gold from synthetic solutions with concentrations ranging from as low as 0.196 ppm up to 196 ppm, reaching in 3 h extraction capacities ranging from 0.756 to 722.5 mg g-1 in 3 h. Finally, we showed CEC is employed to design a metal-free, selective, and recyclable catalytic gold extraction methods from e-waste aqueous leachates.

Recent advances in electrosynthesis of H2O2via two-electron oxygen reduction reaction

The electrosynthesis of hydrogen peroxide (H2O2) via a selective two-electron oxygen reduction reaction (2e- ORR) presents a green and low-energy-consumption alternative to the traditional, energy-intensive anthraquinone process. This review encapsulates the principles of designing relational electrocatalysts for 2e- ORR and explores remaining setups for large-scale H2O2 production. Initially, the review delineates the fundamental reaction mechanisms of H2O2 production via 2e- ORR and assesses performance. Subsequently, it methodically explores the pivotal influence of microstructures, heteroatom doping, and metal hybridization along with setup configurations in achieving a high-performance catalyst and efficient reactor for H2O2 production. Thereafter, the review introduces a forward-looking methodology that leverages the synergistic integration of catalysts and reactors, aiming to harmonize the complementary characteristics of both components. Finally, it outlines the extant challenges and the promising avenues for the efficient electrochemical production of H2O2, setting the stage for future research endeavors.

Electrochemical water oxidation reaction by dinuclear Re(V) oxo complexes with a 1,4-benzoquinone core via the redox induced electron transfer (RIET) process

We report two dinuclear rhenium(V) oxo complexes 1 and 2 types, [ReV(O)(Cl)3(L2-)ReV(O)(Cl)3][NBu4]2 (1, L2- = dianionic 2,5-dihydroxy 1,4-benzoquinone (DBQ2-)) and (2, L2- = dianionic chloranilic acid (CA2-) ligands), as a homogeneous electrocatalyst for water oxidation reactions in the acetonitrile-water mixture. The evolution of dioxygen gas at the anode was confirmed by a GC-TCD study. In controlled potential electrolysis (CPE), oxidation at 1.30 V (vs. Ag/AgCl) at neutral pH, 1 and 2 afforded 1+ [ReVI(O)(Cl)3(DBQ˙3-)ReVI(O)(Cl)3]- and 2+ [ReVI(O)(Cl)3(CA˙3-)ReVI(O)(Cl)3]- ions, respectively, via the redox induced electron transfer (RIET) process. Electrochemically generated species of 1+ and 2+ could be isolated in dry acetonitrile. 1+ and 2+ ions give strong EPR signals in fluid solution as well as under frozen glass conditions due to the [ReVI(O)(Cl)3(L˙3-)ReVI(O)(Cl)3]- ↔ [ReVI(O)(Cl)3(L2-)ReV(O)(Cl)3]- (where L2- = DBQ2- and CA2-) equilibrium. However, the continuation of the CPE study (1.30 V vs. Ag/AgCl) in the presence of acetonitrile-water mixture oxidised the in situ generated species of 1+ and 2+ to higher valent ReVIO species. These species (1+ and 2+) bound water through the water nucleophilic attack (WNA) to produce peroxide intermediate species of [ReV(OOH)(Cl)3(DBQ2-)ReV(OOH)(Cl)3] (A1) and [ReV(OOH)(Cl)3(CA2-)ReV(OOH)(Cl)3] (A2) for catalysts 1 and 2, respectively. Interestingly, A1 and A2 were authenticated and analysed by ESI mass spectrometry and infrared spectroscopy and were the active precursors of this water oxidation process. The extent of current generation under similar conditions suggested that complex 1 is superior to complex 2 for the water oxidation reaction. Notably, the maximum turnover frequency (TOFmax) of catalysts 1 and 2 were 2.1 and 1.6 s-1 at 0.27 V and 0.24 V over potential, respectively, which is very significant in WOR.

Bioinspired Gas Manipulation for Regulating Multiphase Interactions in Electrochemistry

The manipulation of gas in multiphase interactions plays a crucial role in various electrochemical processes. Inspired by nature, researchers have explored bioinspired strategies for regulating these interactions, leading to remarkable advancements in design, mechanism, and applications. This paper provides a comprehensive overview of bioinspired gas manipulation in electrochemistry. It traces the evolution of gas manipulation in gas-involving electrochemical reactions, highlighting the key milestones and breakthroughs achieved thus far. The paper then delves into the design principles and underlying mechanisms of superaerophobic and (super)aerophilic electrodes, as well as asymmetric electrodes. Furthermore, the applications of bioinspired gas manipulation in hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO2RR), and other gas-involving electrochemical reactions are summarized. The promising prospects and future directions in advancing multiphase interactions through gas manipulation are also discussed.

Hydroxylation of the indium tin oxide electrode promoted by surface bubbles

Adherent bubbles at electrodes are generally treated as reaction penalties. Herein, in situ hydroxylation of indium tin oxide surfaces can be easily achieved by applying a constant potential of +1.0 V in the presence of bubbles. Its successful hydroxylation is further demonstrated by preparing a ferrocene-terminated film, which is confirmed by cyclic voltammetry and X-ray photoelectron spectroscopy.

Study on Influence Factors of H2O2 Generation Efficiency on Both Cathode and Anode in a Diaphragm-Free Bath

Electrosynthesis of H2O2 via both pathways of anodic two-electron water oxidation reaction (2e-WOR) and cathodic two-electron oxygen reduction reaction (2e-ORR) in a diaphragm-free bath can not only improve the generation rate and Faraday efficiency (FE), but also simplify the structure of the electrolysis bath and reduce the energy consumption. The factors that may affect the efficiency of H2O2 generation in coupled electrolytic systems have been systematically investigated. A piece of fluorine-doped tin oxide (FTO) electrode was used as the anode, and in this study, its catalytic performance for 2e-WOR in Na2CO3/NaHCO3 and NaOH solutions was compared. Based on kinetic views, the generation rate of H2O2 via 2e-WOR, the self-decomposition, and the oxidative decomposition rate of the generated H2O2 during electrolysis in carbonate electrolytes were investigated. Furthermore, by choosing polyethylene oxide-modified carbon nanotubes (PEO-CNTs) as the catalyst for 2e-ORR and using its loaded electrode as the cathode, the coupled electrolytic systems for H2O2 generation were set up in a diaphragm bath and in a diaphragm-free bath. It was found that the generated H2O2 in the electrolyte diffuses and causes oxidative decomposition on the anode, which is the main influent factor on the accumulated concentration in H2O2 in a diaphragm-free bath.

Boosted Oxygen Kinetics of Hierarchically Mesoporous Mo2C/C for High-current-density Zn-air Battery

The high-current-density Zn-air battery shows big prospects in next-generation energy technologies, while sluggish O2 reaction and diffusion kinetics barricade the applications. Herein, the sequential assembly is innovatively demonstrated for hierarchically mesoporous molybdenum carbides/carbon microspheres with a tunable thickness of mesoporous carbon layers (Meso-Mo2C/C-x, where x represents the thickness). The optimum Meso-Mo2C/C-14 composites (≈2 µm in diameter) are composed of mesoporous nanosheets (≈38 nm in thickness), which possess bilateral mesoporous carbon layers (≈14 nm in thickness), inner Mo2C/C layers (≈8 nm in thickness) with orthorhombic Mo2C nanoparticles (≈2 nm in diameter), a high surface area of ≈426 m2 g-1, and open mesopores (≈6.9 nm in size). Experiments and calculations corroborate the hierarchically mesoporous Mo2C/C can enhance hydrophilicity for supplying sufficient O2, accelerate oxygen reduction kinetics by highly-active Mo2C and N-doped carbon sites, and facilitate O2 diffusion kinetics over hierarchically mesopores. Therefore, Meso-Mo2C/C-14 outputs a high half-wave potential (0.88 V vs RHE) with a low Tafel slope (51 mV dec-1) for oxygen reduction. More significantly, the Zn-air battery delivers an ultrahigh power density (272 mW cm-2), and an unprecedented 100 h stability at a high-current-density condition (100 mA cm-2), which is one of the best performances.

A molecular container providing supramolecular protection against acetylcholine hydrolysis

Alzheimer's disease (AD) is characterized by cognitive decline, often attributed to the deficiency of acetylcholine, which can undergo hydrolysis by acetylcholinesterase (AChE) within the biological milieu. Here, we report a supramolecular strategy that takes advantage of confinement effects to inhibit such a hydrolysis process, shedding some light on AD therapy. A water-soluble and bowl-shaped molecule, hexacarboxylated tribenzotriquinacene (TBTQ-C6), was employed to shield acetylcholine (G1) from enzymatic degradation through host-guest binding interactions. Our study revealed highly efficient host-guest interactions with a binding ratio of 1 : 3, resulting in a significant reduction in acetylcholine hydrolysis from 91.1% to 7.4% in the presence of AChE under otherwise identical conditions. Furthermore, TBTQ-C6 showed potential for attenuating the degradation of butyrylcholine (G2) by butyrylcholinesterase (BChE). The broader implications of this study extend to the potential use of molecular containers in various biochemical and pharmacological applications, opening new avenues for research in the field of neurodegenerative diseases.

Triple-Phase Photocatalytic H2O2 Production on a Janus Fiber Membrane with Asymmetric Hydrophobicity

Photocatalytic O2 reduction is an intriguing approach to producing H2O2, but its efficiency is often hindered by the limited solubility and mass transfer of O2 in the aqueous phase. Here, we design and fabricate a two-layered (2L) Janus fiber membrane photocatalyst with asymmetric hydrophobicity for efficient photocatalytic H2O2 production. The top layer of the membrane consists of superhydrophobic polytetrafluoroethylene (PTFE) fibers with a dispersed modified carbon nitride (mCN) photocatalyst. Amphiphilic Nafion (Naf) ionomer is sprayed onto this layer to modulate the microenvironment and achieve moderate hydrophobicity. In contrast, the bottom layer consists of bare PTFE fibers with high hydrophobicity. The elaborate structural configuration and asymmetric hydrophobicity feature of the optimized membrane photocatalyst (designated as 2L-mCN/F-Naf; F, PTFE) allow most mCN to be exposed with gas-liquid-solid triple-phase interfaces and enable rapid mass transfer of gaseous O2 within the hierarchical membrane, thus increasing the local O2 concentration near the mCN photocatalyst. As a result, the optimized 2L-mCN/F-Naf membrane photocatalyst shows remarkable photocatalytic H2O2 production activity, achieving a rate of 5.38 mmol g-1 h-1 under visible light irradiation.

New Insights on Designing the Next-Generation Materials for Electrochemical Synthesis of Reactive Oxidative Species Towards Efficient and Scalable Water Treatment: A Review and Perspectives

Electrochemical water remediation technologies offer several advantages and flexibility for water treatment and degradation of contaminants. These technologies generate reactive oxidative species (ROS) that degrade pollutants. For the implementation of these technologies at an industrial scale, efficient, scalable, and cost-effective in-situ ROS synthesis is necessary to degrade complex pollutant mixtures, treat large amount of contaminated water, and clean water in a reasonable amount of time and cost. These targets are directly dependent on the materials used to generate the ROS, such as electrodes and catalysts. Here, we review the key design aspects of electrocatalytic materials for efficient in-situ ROS generation. We present a mechanistic understanding of ROS generation, including their reaction pathways, and integrate this with the key design considerations of the materials and the overall electrochemical reactor/cell. This involves tunning the interfacial interactions between the electrolyte and electrode which can enhance the ROS generation rate up to ~ 40% as discussed in this review. We also summarized the current and emerging materials for water remediation cells and created a structured dataset of about 500 electrodes and 130 catalysts used for ROS generation and water treatment. A perspective on accelerating the discovery and designing of the next generation electrocatalytic materials is discussed through the application of integrated experimental and computational workflows. Overall, this article provides a comprehensive review and perspectives on designing and discovering materials for ROS synthesis, which are critical not only for successful implementation of electrochemical water remediation technologies but also for other electrochemical applications.

Electrosynthesis of Hydrogen Peroxide Enabled by Exceptional Molecular Ni Sites in a Graphene-Supported Nickel Organic Framework

Electrosynthesis of hydrogen peroxide (H2O2) from 2e- transfer of the oxygen reduction reaction (2e--ORR) is a potential alternative to the traditional anthraquinone process. Two-dimensional (2D) metal-organic frameworks (MOFs) supported by carbon are frequently reported as promising 2e--ORR catalysts. Herein, a graphene-supported 2D MOF of Ni3(2,3,6,7,10,11-hexahydrotriphenylene)2 is synthesized through a common hydrothermal method, which exhibits high 2e--ORR performance. It is discovered that except for emerging MOFs, exceptional molecularly dispersed Ni sites coexist in the synthesis that have the same coordination sphere of the NiO4C4 moiety as the MOF. The molecular Ni sites are more catalytically active. The graphene support contains a suitable amount of residual oxygen groups, leading to the generation of those molecularly dispersed Ni sites. The oxygen groups exhibit a moderate electron-withdrawing effect at the outer sphere of Ni sites to slightly increase their oxidation state. This interaction decreases overpotentials and kinetically improves the selectivity of the 2e- reaction pathway.

Bubble Engineering on Micro-/Nanostructured Electrodes for Water Splitting

Bubble behaviors play crucial roles in mass transfer and energy efficiency in gas evolution reactions. Combining multiscale structures and surface chemical compositions, micro-/nanostructured electrodes have drawn increasing attention. With the aim to identify the exciting opportunities and rationalize the electrode designs, in this review, we present our current comprehension of bubble engineering on micro-/nanostructured electrodes, focusing on water splitting. We first provide a brief introduction of gas wettability on micro-/nanostructured electrodes. Then we discuss the advantages of micro-/nanostructured electrodes for mass transfer (detailing the lowered overpotential, promoted supply of electrolyte, and faster bubble growth kinetics), localized electric field intensity, and electrode stability. Following that, we outline strategies for promoting bubble detachment and directional transportation. Finally, we offer our perspectives on this emerging field for future research directions.

Super-Oxidizing Covalent Triazine Framework Electrocatalyst for Two-Electron Water Oxidation to H2 O2

Electrochemical two-electron water oxidation (2e WOR) is gaining surging research traction for sustainable hydrogen peroxide production. However, the strong oxidizing environment and thermodynamically competitive side-reaction (4e WOR) posit as thresholds for the 2e WOR. We herein report a custom-crafted covalent triazine network possessing strong oxidizing properties as a proof-of-concept metal-free functional organic network electrocatalyst for catalyzing 2e WOR. As the first-of-its-kind, the material shows a maximum of 89.9 % Faradaic Efficiency and 1428 μmol/h/cm2 H2 O2 production rate at 3.0 V bias potential (vs reversible hydrogen electrode, RHE), which are either better or comparable to the state-of-the-art electrocatalysts. We have experimentally confirmed a stepwise 2e WOR mechanism which was further computationally endorsed by density functional theory studies.

Pulsed electroreduction of low-concentration nitrate to ammonia

Electrocatalytic nitrate (NO3-) reduction to ammonia (NRA) has emerged as an alternative strategy for effluent treatment and ammonia production. Despite significant advancements that have been achieved in this field, the efficient conversion of low-concentration nitrate to ammonia at low overpotential remains a formidable challenge. This challenge stems from the sluggish reaction kinetics caused by the limited distribution of negatively charged NO3- in the vicinity of the working electrode and the competing side reactions. Here, a pulsed potential approach is introduced to overcome these issues. A good NRA performance (Faradaic efficiency: 97.6%, yield rate: 2.7 mmol-1 h-1 mgRu-1, conversion rate: 96.4%) is achieved for low-concentration (≤10 mM) nitrate reduction, obviously exceeding the potentiostatic test (Faradaic efficiency: 65.8%, yield rate: 1.1 mmol-1 h-1 mgRu-1, conversion rate: 54.1%). The combined results of in situ characterizations and finite element analysis unveil the performance enhancement mechanism that the periodic appearance of anodic potential can significantly optimize the adsorption configuration of the key *NO intermediate and increase the local NO3- concentration. Furthermore, our research implies an effective approach for the rational design and precise manipulation of reaction processes, potentially extending its applicability to a broader range of catalytic applications.

Mechanism for Generating H2 O2 at Water-Solid Interface by Contact-Electrification

The recent intensification of the study of contact-electrification at water-solid interfaces and its role in physicochemical processes lead to the realization that electron transfers during water-solid contact-electrification can drive chemical reactions. This mechanism, named contact-electro-catalysis (CEC), allows chemically inert fluorinated polymers to act like single electrode electrochemical systems. This study shows hydrogen peroxide (H2 O2 ) is generated from air and deionized water, by ultrasound driven CEC, using fluorinated ethylene propylene (FEP) as the catalyst. For a mass ratio of catalyst to solution of 1:10000, at 20 °C, the kinetic rate of H2 O2 evolution reaches 58.87 mmol L-1  gcat -1  h-1 . Electron paramagnetic resonance (EPR) shows electrons are emitted in the solution by the charged FEP, during ultrasonication. EPR and isotope labelling experiments show H2 O2 is formed from hydroxyl radicals (HO• ) or two superoxide radicals (O2 •- ) generated by CEC. Finally, it is traditionally believed such radicals migrate in the solution by Brownian diffusion prior to reactions. However, ab-initio molecular dynamic calculations reveal the radicals can react by exchanging protons and electrons through the hydrogen bonds network of water, i.e., owing to the Grotthuss mechanism. This mechanism can be relevant to other systems, artificial or natural, generating H2 O2 from air and water.

The practice of reaction window in an electrocatalytic on-chip microcell

To enhance the efficiency of catalysis, it is crucial to comprehend the behavior of individual nanowires/nanosheets. A developed on-chip microcell facilitates this study by creating a reaction window that exposes the catalyst region of interest. However, this technology's potential application is limited due to frequently-observed variations in data between different cells. In this study, we identify a conductance problem in the reaction windows of non-metallic catalysts as the cause of this issue. We investigate this problem using in-situ electronic/electrochemical measurements and atom-thin nanosheets as model catalysts. Our findings show that a full-open window, which exposes the entire catalyst channel, allows for efficient modulation of conductance, which is ten times higher than a half-open window. This often-overlooked factor has the potential to significantly improve the conductivity of non-metallic catalysts during the reaction process. After examining tens of cells, we develop a vertical microcell strategy to eliminate the conductance issue and enhance measurement reproducibility. Our study offers guidelines for conducting reliable microcell measurements on non-metallic single nanowire/nanosheet catalysts.

Energy-saving and product-oriented hydrogen peroxide electrosynthesis enabled by electrochemistry pairing and product engineering

Hydrogen peroxide (H2O2) electrosynthesis through oxygen reduction reaction (ORR) is drawing worldwide attention, whereas suffering seriously from the sluggish oxygen evolution reaction (OER) and the difficult extraction of thermodynamically unstable H2O2. Herein, we present an electrosynthesis protocol involving coupling ORR-to-H2O2 with waste polyethylene terephthalate (PET) upcycling and the first H2O2 conversion strategy. Ni-Mn bimetal- and onion carbon-based catalysts are designed to catalyze ORR-to-H2O2 and ethylene glycol electrooxidation with the Faradaic efficiency of 97.5% (H2O2) and 93.0% (formate). This electrolysis system runs successfully at only 0.927 V to achieve an industrial-scale current density of 400 mA cm-2, surpassing all reported H2O2 electrosynthesis systems. H2O2 product is upgraded through two downstream routes of converting H2O2 into sodium perborate and dibenzoyl peroxide. Techno-economic evolution highlights the high gross profit of the ORR || PET upcycling protocol over HER || PET upcycling and ORR || OER. This work provides an energy-saving methodology for the electrosynthesis of H2O2 and other chemicals.

Selective and nonselective removal of hydrophobic compounds by coupling engineered FeOCl in a cathode-anode synergistic electrochemical platform

Efficient and selective removal of water pollutants remains a critical challenge. Here, we addressed this challenge by ingeniously engineering FeOCl via polyaniline intercalation and dodecyl group modification (FeOCl-P-S) to improve its activity and selectivity for the in situ removal of hydrophobic phenolic compounds. We further encapsulated the catalyst inside commercial cheap corundum balls and developed a "millimeter-scale reactor", which maintained a high efficiency of 86.02% after ten cycles with negligible physical changes. Moreover, we established the synergy between anodic (generating H+, O2, and IrO3) and cathodic reactions (utilizing H+ and O2) for H2O2 generation and direct anodic oxidation, an unexplored process, in a vertical bidirectional gas diffusion electrochemical system (VB-GDE). By combining the "reactor" and VB-GDE, we constructed a new platform for selective and nonselective continuous pollutant oxidation in a self-sustaining acidic environment with minimal chemical residues. This work presents a promising electrochemical technology for the efficient and selective removal of water pollutants.

Electrosynthesis of Hydrogen Peroxide through Selective Oxygen Reduction: A Carbon Innovation from Active Site Engineering to Device Design

Electrochemical synthesis of hydrogen peroxide (H2 O2 ) through the selective oxygen reduction reaction (ORR) offers a promising alternative to the energy-intensive anthraquinone method, while its success relies largely on the development of efficient electrocatalyst. Currently, carbon-based materials (CMs) are the most widely studied electrocatalysts for electrosynthesis of H2 O2 via ORR due to their low cost, earth abundance, and tunable catalytic properties. To achieve a high 2e- ORR selectivity, great progress is made in promoting the performance of carbon-based electrocatalysts and unveiling their underlying catalytic mechanisms. Here, a comprehensive review in the field is presented by summarizing the recent advances in CMs for H2 O2 production, focusing on the design, fabrication, and mechanism investigations over the catalytic active moieties, where an enhancement effect of defect engineering or heteroatom doping on H2 O2 selectivity is discussed thoroughly. Particularly, the influence of functional groups on CMs for a 2e- -pathway is highlighted. Further, for commercial perspectives, the significance of reactor design for decentralized H2 O2 production is emphasized, bridging the gap between intrinsic catalytic properties and apparent productivity in electrochemical devices. Finally, major challenges and opportunities for the practical electrosynthesis of H2 O2 and future research directions are proposed.

Concurrent oxygen reduction and water oxidation at high ionic strength for scalable electrosynthesis of hydrogen peroxide

Electrosynthesis of hydrogen peroxide via selective two-electron transfer oxygen reduction or water oxidation reactions offers a cleaner, cost-effective alternative to anthraquinone processes. However, it remains a challenge to achieve high Faradaic efficiencies at elevated current densities. Herein, we report that oxygen-deficient Pr1.0Sr1.0Fe0.75Zn0.25O4-δ perovskite oxides rich of oxygen vacancies can favorably bind the reaction intermediates to facilitate selective and efficient two-electron transfer pathways. These oxides exhibited superior Faradic efficiencies (~99%) for oxygen reduction over a wide potential range (0.05 to 0.45 V versus reversible hydrogen electrode) and current densities surpassing 50 mA cm-2 under high ionic strengths. We further found that the oxides perform a high selectivity (~80%) for two-electron transfer water oxidation reaction at a low overpotential (0.39 V). Lastly, we devised a membrane-free electrolyser employing bifunctional electrocatalysts, achieving a record-high Faradaic efficiency of 163.0% at 2.10 V and 50 mA cm-2. This marks the first report of the concurrent oxygen reduction and water oxidation catalysed by efficient bifunctional oxides in a novel membrane-free electrolyser for scalable hydrogen peroxide electrosynthesis.

Dipole field in nitrogen-enriched carbon nitride with external forces to boost the artificial photosynthesis of hydrogen peroxide

Artificial photosynthesis is a promising strategy for efficient hydrogen peroxide production, but the poor directional charge transfer from bulk to active sites restricts the overall photocatalytic efficiency. To address this, a new process of dipole field-driven spontaneous polarization in nitrogen-rich triazole-based carbon nitride (C3N5) to harness photogenerated charge kinetics for hydrogen peroxide production is constructed. Here, C3N5 achieves a hydrogen peroxide photosynthesis rate of 3809.5 µmol g-1 h-1 and a 2e- transfer selectivity of 92% under simulated sunlight and ultrasonic forces. This high performance is attributed to the introduction of rich nitrogen active sites of the triazole ring in C3N5, which brings a dipole field. This dipole field induces a spontaneous polarization field to accelerate a rapid directional electron transfer process to nitrogen active sites and therefore induces Pauling-type adsorption of oxygen through an indirect 2e- transfer pathway to form hydrogen peroxide. This innovative concept using a dipole field to harness the migration and transport of photogenerated carriers provides a new route to improve photosynthesis efficiency via structural engineering.

Photosynthesis of Hydrogen Peroxide Based on g-C3 N4 : The Road of a Cost-Effective Clean Fuel Production

Emerging artificial photosynthesis promises to offer a competitive means for solar energy conversion and further solves the energy crisis facing the world. Hydrogen peroxide (H2 O2 ), which is considered as a benign oxidant and a prospective liquid fuel, has received worldwide attention in the field of artificial photosynthesis on account of the source materials are just oxygen, water, and sunlight. Graphitic carbon nitride (g-C3 N4 )-based photocatalysts for H2 O2 generation have attracted extensive research interest due to the intrinsic properties of g-C3 N4 . In this review, research processes for H2 O2 generation on the basis of g-C3 N4 , including development, fabrication, merits, and disadvantages, and the state-of-the-art methods to enhance the performance are summarized after a brief introduction and the mechanism analysis of an efficient catalytic system. Also, recent applications of g-C3 N4 -based photocatalysts for H2 O2 production are reviewed, and the significance of active sites and synthetic pathways are highlighted from the view of reducing barriers. Finally, this paper ends with some concluding remarks to reveal the issues and opportunities of g-C3 N4 -based photocatalysts for producing H2 O2 in a high yield.

Photocatalytic Synthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Hydrogen peroxide is a powerful and green oxidant that allows for the oxidation of a wide span of organic and inorganic substrates in liquid media under mild reaction conditions, and forms only molecular water and oxygen as end products. Hydrogen peroxide is therefore used in a wide range of applications, for which the well-documented and established anthraquinone autoxidation process is by far the dominating production method at the industrial scale. As this method is highly energy consuming and environmentally costly, the search for more sustainable synthesis methods is of high interest. To this end, the article reviews the basis and the recent development of the photocatalytic synthesis of hydrogen peroxide. Different oxygen reduction and water oxidation mechanisms are discussed, as well as several kinetic models, and the influence of the main key reaction parameters is itemized. A large range of photocatalytic materials is reviewed, with emphasis on titania-based photocatalysts and on high-prospect graphitic carbon nitride-based systems that take advantage of advanced bulk and surface synthetic approaches. Strategies for enhancing the performances of solar-driven photocatalysts are reported, and the search for new, alternative, photocatalytic materials is detailed. Finally, the promise of in situ photocatalytic synthesis of hydrogen peroxide for water treatment and organic synthesis is described, as well as its coupling with enzymes and the direct in situ synthesis of other technical peroxides.

Tailored BiVO4 Photoanode Hydrophobic Microenvironment Enables Water Oxidative H2 O2 Accumulation

Direct photoelectrochemical 2-electron water oxidation to renewable H₂ O₂ production on an anode increases the value of solar water splitting. BiVO₄ has a theoretical thermodynamic activity trend toward highly selective water oxidation H₂ O₂ formation, but the challenges of competing 4-electron O₂ evolution and H₂ O₂ decomposition reaction need to overcome. The influence of surface microenvironment has never been considered as a possible activity loss factor in the BiVO₄ -based system. Herein, it is theoretically and experimentally demonstrated that the situ confined O₂ , where coating BiVO₄ with hydrophobic polymers, can regulate the thermodynamic activity aiming for water oxidation H₂ O₂ . Also, the hydrophobicity is responsible for the H₂ O₂ production and decomposition process kinetically. Therefore, after the addition of hydrophobic polytetrafluoroethylene on BiVO₄ surface, it achieves an average Faradaic efficiency (FE) of 81.6% in a wide applied bias region (0.6-2.1 V vs RHE) with the best FE of 85%, which is 4-time higher than BiVO₄ photoanode. The accumulated H₂ O₂ concentration can reach 150 µm at 1.23 V versus RHE under AM 1.5 illumination in 2 h. This concept of modifying the catalyst surface microenvironment via stable polymers provides a new approach to tune the multiple-electrons competitive reactions in aqueous solution.

Polymer Coated Functional Catalysts for Industrial Applications

Surface engineering of conventional catalysts using polymeric coating has been extensively explored for producing hybrid catalytic material with enhanced activity, high mechanical and thermal stability, enhanced productivity, and selectivity of the desired product. The present review discusses in detail the state-of-the-art knowledge on surface modification of catalysts, namely photocatalysts, electrocatalysts, catalysts for photoelectrochemical reactions, and catalysts for other types of reactions, such as hydrodesulfurization, carbon dioxide cycloaddition, and noble metal-catalyzed oxidation/reduction reactions. The various techniques employed for the polymer coating of catalysts are discussed and the role of polymers in enhancing the catalytic activity is critically analyzed. The review further discusses the applications of biodegradable and biocompatible natural polysaccharide-based polymers, namely, chitosan and polydopamine as prospective coating material.

The effects of intercalated environmental gas molecules on carrier dynamics in WSe2/WS2 heterostructures

Effective tuning of carrier dynamics in two-dimensional (2D) materials is significant for multi-scene device applications. Using first-principles and ab initio nonadiabatic molecular dynamics calculations, the kinetics of O₂, H₂O, and N₂ intercalation into 2D WSe₂/WS₂ van der Waals heterostructures and its effect on carrier dynamics have been comprehensively explored. It is found that the O₂ molecule prefers to dissociate into atomic O atoms spontaneously after intercalation of WSe₂/WS₂ heterostructures, whereas H₂O and N₂ molecules remain intact. O₂ intercalation significantly speeds up the electron separation process, while H₂O intercalation largely speeds up the hole separation process. The lifetime of excited carriers can be prolonged by O₂ or H₂O or N₂ intercalations. These intriguing phenomena can be attributed to the effect of interlayer coupling, and the underlying physical mechanism for tuning the carrier dynamics is fully discussed. Our results provide useful guidance for the experimental design of 2D heterostructures for optoelectronic applications in photocatalysts and solar energy cells.

On-Chip Liquid Manipulation via a Flexible Dual-Layered Channel Possessing Hydrophilic/Hydrophobic Dichotomy

The hydrophilic/hydrophobic cooperative interface provides a smart platform to control liquid distribution and delivery. Through the fusion of flexibility and complex structure, we present a manipulable, open, and dual-layered liquid channel (MODLC) for on-demand mechanical control of fluid delivery. Driven by anisotropic Laplace pressure, the mechano-controllable asymmetric channel of MODLC can propel the directional slipping of liquid located between the paired tracks. Upon a single press, the longest transport distance can reach 10 cm with an average speed of ∼3 cm/s. The liquid on the MODLC can be immediately manipulated by pressing or dragging processes, and versatile liquid-manipulating processes on hierarchical MODLC chips have been achieved, including remote droplet magneto-control, continuous liquid distributor, and gas-producing chip. The flexible hydrophilic/hydrophobic interface and its assembly can extend the function and applications of the wettability-patterned interface, which should update our understanding of complex systems for sophisticated liquid transport.

Rational Design of Highly Efficient PdIn-In2O3 Interfaces by a Capture-Alloying Strategy for Benzyl Alcohol Partial Oxidation

Well-dispersed PdIn bimetallic alloy nanoparticles (1-4 nm) were immobilized on mesostructured silica by an in situ capture-alloying strategy, and PdIn-In₂O₃ interfaces were rationally constructed by changing the In₂O₃ loading and reduction temperature. The catalytic performance for benzyl alcohol partial oxidation was evaluated, and a catalytic synergy was observed. The Pd-rich PdIn-In₂O₃ interface is prone to be formed on the catalyst with a low In₂O₃ loading after being reduced at 300 °C. It was demonstrated that the Pd-rich PdIn-In₂O₃ interface was more active for benzyl alcohol partial oxidation than In-rich Pd₂In₃ species, which was likely to be formed at a high reduction temperature (400 °C). The high catalytic activity on the Pd-rich PdIn-In₂O₃ interface was attributed to the exposure of more Pd-enriched active sites, and an optimized PdIn-In₂O₃/Pd assemble ratio enhanced the oxygen transfer during partial oxidation. The density functional theory (DFT) calculation confirmed that the Pd-rich Pd₃In₁(111)-In₂O₃ interface facilitated the activation of oxygen molecules, resulting in high catalytic activity.

Recent Advances of Electrocatalyst and Cell Design for Hydrogen Peroxide Production

Electrochemical synthesis of H2O2 via a selective two-electron oxygen reduction reaction has emerged as an attractive alternative to the current energy-consuming anthraquinone process. Herein, the progress on electrocatalysts for H2O2 generation, including noble metal, transition metal-based, and carbon-based materials, is summarized. At first, the design strategies employed to obtain electrocatalysts with high electroactivity and high selectivity are highlighted. Then, the critical roles of the geometry of the electrodes and the type of reactor in striking a balance to boost the H2O2 selectivity and reaction rate are systematically discussed. After that, a potential strategy to combine the complementary properties of the catalysts and the reactor for optimal selectivity and overall yield is illustrated. Finally, the remaining challenges and promising opportunities for high-efficient H2O2 electrochemical production are highlighted for future studies.

Discovering Reactant Supply Pathways at Electrode/PEM Reaction Interfaces Via a Tailored Interface-Visible Characterization Cell

In situ and micro-scale visualization of electrochemical reactions and multiphase transports on the interface of porous transport electrode (PTE) materials and solid polymer electrolyte (SPE) has been one of the greatest challenges for electrochemical energy conversion devices, such as proton exchange membrane electrolyzer cells (PEMECs), CO₂ reduction electrolyzers, PEM fuel cells, etc. Here, an interface-visible characterization cell (IV-CC) is developed to in situ visualize micro-scaled and rapid electrochemical reactions and transports in PTE/SPE interfaces. Taking the PEMEC of a green hydrogen generator as a study case, the unanticipated local gas blockage, micro water droplets, and their evolution processes are successfully visualized on PTE/PEM interfaces in a practical PEMEC device, indicating the existence of unconventional reactant supply pathways in PEMs. Further comprehensive results reveal that PEM water supplies to reaction interfaces are significantly impacted with current densities. These results provide critical insights about the reaction interface optimization and mass transport enhancement in various electrochemical energy conversion devices.

Electrochemical generation of hydrogen peroxide from a zinc gallium oxide anode with dual active sites

Electrochemical water oxidation enables the conversion of H₂O to H₂O₂. It holds distinct advantages to the O₂ reduction reaction, which is restricted by the inefficient mass transfer and limited solubility of O₂ in aqueous media. Nonetheless, most reported anodes suffer from high overpotentials (usually >1000 mV) and low selectivity. Electrolysis at high overpotentials often causes serious decomposition of peroxides and leads to declined selectivity. Herein, we report a ZnGa₂O₄ anode with dual active sites to improve the selectivity and resist the decomposition of peroxides. Its faradaic efficiency reaches 82% at 2.3 V versus RHE for H₂O₂ generation through both direct (via OH^-) and indirect (via HCO₃^-) pathways. The percarbonate is the critical species generated through the conversion of bicarbonate at Ga-Ga dual sites. The peroxy bond is stable on the surface of the ZnGa₂O₄ anode, significantly improving faradaic efficiency.

A Fluorinated Covalent Organic Framework with Accelerated Oxygen Transfer Nanochannels for High-Performance Zinc-Air Batteries

The establishment of abundant three-phase interfaces with accelerated mass transfer in air cathodes is highly desirable for the development of high-rate and long-cycling rechargeable zinc-air batteries (ZABs). Covalent organic frameworks (COFs) exhibit tailored nanopore structures, facilitating the rational tuning of their specific properties. Here, by finely tuning the fluorinated nanopores of a COF, a novel air cathode for rechargeable ZABs is unprecedentedly designed and synthesized. COF nanosheets are decorated with fluorinated alkyl chains, which shows high affinity to oxygen (O₂ ), in its nanopores (fluorinated COF). The fluorinated COF nanosheets are stacked into well-defined O₂ -transport channels, which are then assembled into aerophilic "nano-islands" on the hydrophilic FeNi layered-double-hydroxide (FeNi LDH) electrocatalyst surface. Therefore, the mass-transport "highway" for O₂ and water is segregated on the nanoscale, which significantly enlarges the area of three-phase boundaries and greatly promotes the mass-transfer therein. ZABs based on the COF-modified air cathode deliver a small charge/discharge voltage gap (0.64 V at 5 mA cm^-2 ), a peak power density (118 mW cm^-2 ), and a stable cyclability. This work provides a feasible approach for the design of the air cathodes for high-performance ZABs, and will expand the new application of COFs.

Photocatalytic and Electrocatalytic Generation of Hydrogen Peroxide: Principles, Catalyst Design and Performance

Hydrogen peroxide (H2O2) is a high-demand organic chemical reagent and has been widely used in various modern industrial applications. Currently, the prominent method for the preparation of H2O2 is the anthraquinone oxidation. Unfortunately, it is not conducive to economic and sustainable development since it is a complex process and involves unfriendly environment and potential hazards. In this context, numerous approaches have been developed to synthesize H2O2. Among them, photo/electro-catalytic ones are considered as two of the most promising manners for on-site synthesis of H2O2. These alternatives are sustainable in that only water or O2 is required. Namely, water oxidation (WOR) or oxygen reduction (ORR) reactions can be further coupled with clean and sustainable energy. For photo/electro-catalytic reactions for H2O2 generation, the design of the catalysts is extremely important and has been extensively conducted with an aim to obtain ultimate catalytic performance. This article overviews the basic principles of WOR and ORR, followed by the summary of recent progresses and achievements on the design and performance of various photo/electro-catalysts for H2O2 generation. The related mechanisms for these approaches are highlighted from theoretical and experimental aspects. Scientific challenges and opportunities of engineering photo/electro-catalysts for H2O2 generation are also outlined and discussed.

Dynamically Reversible Interconversion of Molecular Catalysts for Efficient Electrooxidation of Propylene into Propylene Glycol

For the electrooxidation of propylene into 1,2-propylene glycol (PG), the process involves two key steps of the generation of *OH and the transfer of *OH to the C═C bond in propylene. The strong *OH binding energy (E_B(*OH)) favors the dissociation of H₂O into *OH, whereas the transfer of *OH to propylene will be impeded. The scaling relationship of the E_B(*OH) plays a key role in affecting the catalytic performance toward propylene electrooxidation. Herein, we adopt an immobilized Ag pyrazole molecular catalyst (denoted as AgPz) as the electrocatalyst. The pyrrolic N-H in AgPz could undergo deprotonation to form pyrrolic N (denoted as AgPz-H_vac), which can be protonated reversibly. During propylene electrooxidation, the strong E_B(*OH) on AgPz favors the dissociation of H₂O into *OH. Subsequently, the AgPz transforms into AgPz-H_vac that possesses weak E_B(*OH), benefiting to the further combination of *OH and propylene. The dynamically reversible interconversion between AgPz and AgPz-H_vac accompanied by changeable E_B(*OH) breaks the scaling relationship, thus greatly lowering the reaction barrier. At 2.0 V versus Ag/AgCl electrode, AgPz achieves a remarkable yield rate of 288.9 mmol_PG g_cat^-1 h^-1, which is more than one order of magnitude higher than the highest value ever reported.

Solar-to-H2 O2 Energy Conversion by the Photothermal Effect of a Polymeric Photocatalyst via a Two-Channel Pathway

With a view to using solar energy, the exploitation of near-infrared (NIR) light, which constitutes about 50 % of solar energy, in photocatalytic H₂ O₂ synthesis remains challenging. In this study, resorcinol-formaldehyde (RF), which has a relatively low bandgap and high conductivity, is introduced for photothermal catalytic generation of H₂ O₂ under ambient conditions. Owing to the promoted surface charge transfer rate under high temperature, the photosynthetic yield reaches roughly 2000 μm within 40 min under 400 mW cm^-2 irradiation with a solar-to-chemical conversion (SCC) efficiency of up to 0.19 % at 338 K under ambient conditions, exceeding the rate of photocatalysis with a cooling system by a factor of about 2.5. Notably, the H₂ O₂ produced by RF during photothermal process was formed via a two-channel pathway, leading to the overall promotion of H₂ O₂ formation. The resultant H₂ O₂ can be applied in situ for pollutant removal. This work offers a sustainable and economical route for the efficient formation of H₂ O₂ .

Crystal Engineering Enables Cobalt-Based Metal-Organic Frameworks as High-Performance Electrocatalysts for H2O2 Production

Metal-organic frameworks (MOFs) with highly adjustable structures are an emerging family of electrocatalysts in two-electron oxygen reduction reaction (2e-ORR) for H₂O₂ production. However, the development of MOF-based 2e-ORR catalysts with high H₂O₂ selectivity and production rate remains challenging. Herein, an elaborate design with fine control over MOFs at both atomic and nano-scale is demonstrated, enabling the well-known Zn/Co bimetallic zeolite imidazole frameworks (ZnCo-ZIFs) as excellent 2e-ORR electrocatalysts. Experimental results combined with density functional theory simulation have shown that the atomic level control can regulate the role of water molecules participating in the ORR process, and the morphology control over desired facet exposure adjusts the coordination unsaturation degree of active sites. The structural regulation at two length scales leads to synchronous control over both the kinetics and thermodynamics for ORR on bimetallic ZIF catalysts. The optimized ZnCo-ZIF with a Zn/Co molar ratio of 9/1 and predominant {001} facet exposure exhibits a high 2e^- selectivity of ∼100% and a H₂O₂ yield of 4.35 mol g_cat^-1 h^-1. The findings pave a new avenue toward the development of multivariate MOFs as advanced 2e-ORR electrocatalysts.

Concerted and Selective Electrooxidation of Polyethylene-Terephthalate-Derived Alcohol to Glycolic Acid at an Industry-Level Current Density over a Pd-Ni(OH)2 Catalyst

Electro-reforming of Polyethylene-terephthalate-derived (PET-derived) ethylene glycol (EG) into fine chemicals and H₂ is an ideal solution to address severe plastic pollution. Here, we report the electrooxidation of EG to glycolic acid (GA) with a high Faraday efficiency and selectivity (>85 %) even at an industry-level current density (600 mA cm^-2 at 1.15 V vs. RHE) over a Pd-Ni(OH)₂ catalyst. Notably, stable electrolysis over 200 h can be achieved, outperforming all available Pd-based catalysts. Combined experimental and theoretical results reveal that 1) the OH* generation promoted by Ni(OH)₂ plays a critical role in facilitating EG-to-GA oxidation and removing poisonous carbonyl species, thereby achieving high activity and stability; 2) Pd with a downshifted d-band center and the oxophilic Ni can synergistically facilitate the rapid desorption and transfer of GA from the active Pd sites to the inactive Ni sites, avoiding over-oxidation and thus achieving high selectivity.

Single atomic Ru in TiO2 boost efficient electrocatalytic water oxidation to hydrogen peroxide

Electrocatalytic two-electron water oxidation affords a promising approach for distributed production of H₂O₂ using electricity. However, it suffers from the trade-off between the selectivity and high production rate of H₂O₂ due to the lack of suitable electrocatalysts. In this study, single atoms of Ru were controllably introduced into titanium dioxide to produce H₂O₂ through an electrocatalytic two-electron water oxidation reaction. The adsorption energy values of OH intermediates could be tuned by introducing Ru single atoms, offering superior H₂O₂ production under high current density. Notably, a Faradaic efficiency of 62.8% with an H₂O₂ production rate of 24.2 μmol min^-1 cm^-2 (>400 ppm within 10 min) was achieved at a current density of 120 mA cm^-2. Consequently, herein, the possibility of high-yield H₂O₂ production under high current density was demonstrated and the importance of regulating intermediate adsorption during electrocatalysis was evidenced.

Nanoarchitecture Manipulation by Polycondensation on KCl Crystals toward Crystalline Lamellar Carbon Nitride for Efficient H2O2 Photoproduction

A lamellar carbon nitride (CN) framework is one of the most promising materials for solar-driven hydrogen peroxide production. The low dielectric constant of the organic CN framework leads to severe recombination of the excitons, and the photon-to-chemical conversion efficiency is thus unsatisfactory. In this work, by polycondensation of the small molecules on the KCl crystal surface, K⁺-incorporated crystalline CN (CNK) frameworks show significantly extended periodicity of the stacking layers and in-plane orderly organized heptazine/triazine units. The crystalline CNK frameworks exhibit a series of favorable photophysical properties, such as enhanced photon absorption, negatively shifted LUMO potentials, and attenuated emissive decay of the excitons. The CNK frameworks thus present remarkable performance in the photocatalytic selective oxygen reduction reaction for hydrogen peroxide production, e.g., CNK framework from the polycondensation of NH₄SCN on the KCl surface could produce hydrogen peroxide at a remarkable reaction rate of 26.7 mmol h^-1 g^-1 with a high apparent quantum yield of 25.0%, which is 23.5 times that on its counterpart synthesized in the absence of KCl. This method is generally applicable to all of the precursors for CN synthesis.