Versatile bimetallic lanthanide metal-organic frameworks for tunable emission and efficient fluorescence sensing

Preparation of carboxymethyl chitosan-Tb3+ (CMCh-Tb3+) fluorescent probe: For high-sensitivity Cu2+ detection and mechanism study

Carboxymethyl chitosan (CMCh) is a natural polysaccharide derivative with biodegradability, rich in active amino and carboxyl groups. It can act as a ligand to coordinate with rare earth ions, transferring absorbed energy to the central ion to sensitize its luminescence. In this paper, CMCh-Tb3+ was prepared as a solid fluorescent probe by mixing CMCh solution with Tb3+. The morphology, structure and properties of CMCh-Tb3+ were characterized and analyzed by SEM, IR and XPS, and then the chemical structure of CMCh-Tb3+ was determined. CMCh-Tb3+, as a highly sensitive fluorescent sensor for detecting Cu2+, has a detection limit (LOD) of 27.14 nmol/L. Through characterization using fluorescence spectroscopy, ultraviolet absorption spectroscopy, and fluorescence lifetime, we further explored the mechanism of Cu2+ fluorescence quenching, finding that this process is primarily achieved through dynamic quenching. Additionally, we discovered that glutathione (GSH) can form a strong coordination with Cu2+, thereby inhibiting the quenching effect of Cu2+ on the emission intensity of CMCh-Tb3+ and restoring its luminescence characteristics. This finding indicates that CMCh-Tb3+ can not only serve as a fluorescence sensor for detecting Cu2+ but also as a reversible fluorescence sensor, significantly enhancing its performance in practical applications.

Solvatomorphic phase transitions and tunable luminescence emission in lanthanide metal-organic frameworks

Four new metal-organic frameworks with the formulae [Sm2(phen)2(NO3)2(chdc)2]·2solv, where solv = N,N-dimethylformamide (DMF; 1), N,N-dimethylacetamide (DMA; 2), N,N-diethylformamide (DEF; 3), N-formylpiperidine (NFP; 4), phen = 1,10-phenanthroline and chdc2- = trans-1,4-cyclohexanedicarboxylate were synthesized and structurally characterized. These compounds are based on similar binuclear samarium(III)-carboxylate blocks, bound by flexible chdc linkers into layered sql-type coordination networks. The amide solvents drive different intralayer block orientations between 1 and 2-4 and different layer-to-layer packings in all the described compounds. A pronounced dependence of the emission color upon the excitation wavelength variation was determined for 1-4, while the relative impacts of Sm3+ and phen emission on overall luminescence were found to depend strongly on these packings, and their reasonable correlation to the distances between the closest π-π-stacked phen moieties in the structures was revealed. Phase transitions between compounds 1-4 were studied by means of powder X-ray diffraction. Additionally, bimetallic near-white luminophores were obtained for phases 3 and 4 by doping their synthetic systems with a minor (∼5%) Tb3+ additive. In general, this study shows a possibility of tuning the luminescence properties of porous metal-organic frameworks by minor structural differences induced by solvent-driven dynamics with no apparent quenching or other direct impact on the optical properties of the included solvent.

Water-Stable Ln-MOF as a multi-emitting luminescent sensor for the detection of metal ions and pharmaceuticals

The development of innovative multi-emission sensors for the rapid and accurate detection of contaminants is both vital and challenging. In this study, utilizing two rigid ligands (H3ICA and H4BTEC), a series of water-stable bimetallic organic frameworks (EuTb-MOFs) were synthesized. Luminescent investigations have revealed that EuTb-MOF-1 exhibits prominent multiple emission peaks, attributed to the distinctive fluorescence characteristics of Eu(III) and Tb(III) ions. Therefore, EuTb-MOF-1 efficiently recognized various metal ions and pharmaceutical compounds through 2D decoded maps. Fe3+ and Pb2+ exhibited significant quenching effects on the luminescence of EuTb-MOF-1, which were attributed to the internal filtering effect and the interaction between Lewis basic sites within EuTb-MOF-1 and Pb2+ ions, respectively. Furthermore, EuTb-MOF-1 demonstrated high sensitivity to sulfonamide antibiotics, with detection limits of 0.037 μM for SMZ and 0.041 μM for SDZ, respectively. In addition, EuTb-MOF-1 was immobilized to prepare MOF-based test strips, enabling direct visual detection of sulfonamides as a portable sensor. With excellent water stability, multi-responsive recognition capabilities, and high sensitivity to specific analytes, EuTb-MOF-1 is a promising candidate for environmental contaminant detection in aquatic systems.

A ratiometric fluorescence sensor with different responsive modes based on carbon dots-embedded Tb-MOFs for the determination of norfloxacin and levofloxacin

Norfloxacin (NOR) and levofloxacin (LEV) are the two most frequently used fluoroquinolones (FQs) in clinic. Their residues seriously endanger the ecosystem and human health. Due to their similarity in structure and properties, it is urgent to develop an efficient and sensitive strategy for detection and differentiation. Herein, we synthesized a novel ratiometric fluorescent sensor for the first time by combining N, S co-doped carbon dots (CDs) and the precursors of Tb-MOFs through a facile one-pot method. The introduction of CDs effectively facilitated the energy transfer between Tb3+ and FQs, overcoming the limitation that single Tb-MOFs could not identify similar antibiotics. Specifically, the presence of NOR resulted in reverse signal response through the inner filter effect and antenna effect. The synergistic effect of these two mechanisms contributed to achieving signal amplification accompanied by a distinguishable color transition. The limit of detection (LOD) was 0.036 μM. Different from NOR, the addition of LEV reduced the electron density of the system, weakened the coordination ability of Tb3+ with LEV, and induced a single signal response with Tb3+ fluorescence intensity as a reference signal (LOD = 0.383 μM). Furthermore, the method proved to be rapid and visual, allowing for the straightforward analysis of FQs residues in water, food matrices, and biological samples with satisfactory precision. By integrating N, S-CDs@Tb-MOFs with flexible substrates, the paper-based sensor facilitated the visual quantitative determination of FQs by reading RGB values. The developed sensor presents a promising strategy for the identification and real-time monitoring of antibiotics.

Epitaxial Growth of Multicolor Lanthanide MOFs by Ultrasound for Photonic Barcodes

Epitaxially grown lanthanide metal-organic frameworks (Ln MOFs) exhibit multicolor and characteristic Ln emission with sharp emission bands, which are of great value in the field of information security and anti-counterfeiting. Epitaxial growth of Ln MOFs is generally achieved by solvothermal or hydrothermal methods, which suffer from challenges such as high reaction temperature and long growth time. Here, we report the fast epitaxial growth of multicolor lanthanide MOFs by an ultrasonic method at room temperature. The TbSmSQ shows a core-shell type structure with the Tb ion in the core and Sm in the shell within one crystal and exhibits the characteristic emission lines of Tb and Sm, respectively. The nonporous structure and large distance between lanthanide ions effectively avoid the influence of solvent vapor on the intensity and color of luminescence emission. Its application as photonic barcodes has been studied. This work demonstrates the feasibility of epitaxial growth of multicolor Ln MOFs by the ultrasonic method and its value for anti-counterfeiting and information security applications.

A Two-Photon-Active Zr-Based Metal-Organic Framework-Based Orthogonal Nanoprobe for Recognition of Cellular Senescence

A luminescent nanoprobe capable of orthogonal sensing of two independent events is highly significant for unbiased disease-related detection such as the detection of senescent cells. Moreover, it is invaluable that the nanoprobe possesses a two-photon excitable characteristic that is highly suitable for imaging living cells and tissues. Herein, we present a two-photon-excitable multiluminescent orthogonal-sensing nanoprobe (OS nanoprobe) capable of detecting both pH elevation and β-galactosidase (β-gal) overexpression in senescent cells. In the design, Zr-based dual-emissive metal-organic frameworks prepared from two mixed amino linkers, referred to as NH2-MU, were used as the component for the ratiometric sensing of pH; additionally, fluorogenic resorufin-β-d-galactopyranoside, linked to the NH2-MU framework, enables β-gal detection. In the OS nanoprobe, the signals for pH and β-gal sensing remain independent while maintaining high colocalization. The two-photon excitable organic linkers of NH2-MU impart the OS nanoprobe with a bioimaging capability, allowing for the differentiation of senescent human foreskin fibroblast (HFF) cells from younger HFF cells or LacZ positive cells with the 800 nm laser excitation. This study marks the first instance of achieving the multiplexed orthogonal fluorescent sensing of cellular senescence using a two-photon excitation strategy, suggesting the potential of using versatile metal-organic framework (MOFs)-based fluorophores to realize the orthogonal multiplexing of disease-related biomarkers through multiphoton excitation.

The design, synthesis and application of metal-organic framework-based fluorescence sensors

Fluorescence-based chemical sensors have garnered significant attention due to their rapid response, high sensitivity, cost-effectiveness and ease of operation. Recently, metal-organic frameworks (MOFs) have been extensively utilized as platforms for constructing fluorescence sensors, owing to their ultra-high porosity, flexible tunability, and excellent luminescent properties. This feature article summarizes the progress made mainly by our research group in recent years in the construction strategies, principles, and types of MOF sensors, as well as their applications in quantitative sensing, qualitative identification analysis, and multimodal/multifunctional analysis. In addition, the challenges and an outlook on the future progression of MOF-based sensors are discussed, highlighting how these studies can contribute to addressing these issues. Hopefully, this feature article can provide some valuable guidance for the construction and application of MOFs in fluorescence sensing, thereby broadening their practical applications.

Thermal Annealing Effects on Long-Lived Fluorenol Room Temperature Phosphorescence for Styrene Detection

Fluorene derivatives have been widely developed in OLEDs because of its efficient fluorescence quantum efficiency, but for which unique rigid biphenyl planar structure and large conjugated system, we hypothesize that they have a great potential for room temperature phosphorescence (RTP) applications, and confirmed this conjecture by subjecting polyvinyl alcohol (PVA) and phosphors to thermal annealing. The cross-linked structure formed during thermal annealing judiciously modulates the phosphorescence emission characteristics of the fluorenol with the synergistic interaction between PVA and fluorenol. Specifically, the lifetime exhibited a substantial increase from 1352.2 ms to 2874.1 ms, accompanied by a quantum yield augmentation from 4.8 % to 11.3 %, which substantiate that cross-linked induced by thermal annealing effectively amplifies the phosphorescent intensity and stability of the phosphors, facilitating ultralong phosphorescent emission at ambient conditions. Furthermore, an effective probe based on this film is developed for its highly sensitive, quantitative and immediate detection of volatile organic compounds. This investigation not only proffers a novel paradigm for the development of advanced RTP materials but also imparts insightful considerations for optimizing the performance of polymers in conjunction with functional materials, encompassing bioimaging, sensing, and optoelectronic devices.

Emissive supramolecular ionic crystals combining a red-NIR phosphorescent [Re6Se8CN6]4- cluster anion and a blue fluorescent tetraphenylethene counter-cation

A blue fluorescent tetraphenylethylene-based dication and a red-NIR phosphorescent rhenium octahedral cluster tetra-anion are associated electrostatically to generate a supramolecular ionic framework which crystallizes in the P1̄ centric space group. The emission properties of the hybrids are studied in the crystalline state and in solution revealing a resonant energy transfer and a high sensitivity toward oxygen.

A novel 2D Eu-MOF as a dual-functional fluorescence sensor for detection of benzaldehyde and Fe3

Lanthanide metal-organic frameworks (Ln-MOFs) have unique advantages in sensing due to their excellent optical properties. In this study, we synthesized a dicarboxylic acid ligand with amide groups and successfully synthesized a novel two-dimensional (2D) MOF with the molecular formula C42H31EuN4O10 (Eu-MOF) by a solvothermal method. Single-crystal X-ray diffraction showed that amide groups are exposed on the outside of the two-dimensional coordination layer, with the possibility of recognizing specific molecules through hydrogen bonding interactions. The ligand's "antenna effect" enables Eu-MOF to emit a strong luminescence characterized by the "f-f" transition. Further studies have revealed that Eu-MOF could be used as a bifunctional fluorescent probe for the selective detection of benzaldehyde and Fe3+. The sensing mechanism has been analyzed in detail through powder X-ray diffraction (PXRD) analysis, UV-vis spectroscopy, fluorescence lifetime measurement, and density functional (DFT) theory calculation. This design and research can provide a reference for subsequent related work.

Recent Advances of Bimetallic-Metal Organic Frameworks: Preparation, Properties, and Fluorescence-Based Biochemical Sensing Applications

Bimetallic-metal organic frameworks (BiM-MOFs) or bimetallic organic frameworks represent an innovative and promising class of porous materials, distinguished from traditional monometallic MOFs by their incorporation of two metal ions alongside organic linkers. BiM-MOFs, with their unique crystal structure, physicochemical properties, and composition, demonstrate distinct advantages in the realm of biochemical sensing applications, displaying improvements in optical properties, stability, selectivity, and sensitivity. This comprehensive review explores into recent advancements in leveraging BiM-MOFs for fluorescence-based biochemical sensing, providing insights into their design, synthesis, and practical applications in both chemical and biological sensing. Emphasizing fluorescence emission as a transduction mechanism, the review aims to guide researchers in maximizing the potential of BiM-MOFs across a broader spectrum of investigations. Furthermore, it explores prospective research directions and addresses challenges, offering valuable perspectives on the evolving landscape of fluorescence-based probes rooted in BiM-MOFs.

A Ratiometric Fluorescent Probe Dye-Functionalized MOFs Integrated with Logic Gate Operation for Efficient Detection of Acetaldehyde

Volatile organic compounds (VOCs) are a class of hazardous gases that are widely present in the atmosphere and cause great harm to human health. In this paper, a ratiometric fluorescent probe (Dye@Eu-MOFs) based on a dye-functionalized metal-organic framework was designed to detect VOCs, which showed high sensitivity and specificity for acetaldehyde solution and vapor. A linear correlation between the integrated fluorescence intensity (I510/I616) and the concentration of acetaldehyde was investigated, enabling a quantitative analysis of acetaldehyde in the ranges of 1 × 10-4~10-5 μL/mL, with a low detection limit of 8.12 × 10-4 mg/L. The selective recognition of acetaldehyde could be clearly distinguished by the naked eye under the excitation of UV light. The potential sensing mechanism was also discussed. Significantly, a molecular logic gate was constructed based on the whole system, and finally, a molecular logic network system for acetaldehyde detection connecting basic and integrated logic operations was realized. This strategy provided an effective guiding method for constructing a molecular-level logic gate for acetaldehyde detection on a simple platform.

Selective fluoride sensing by a novel series of lanthanide-based one-dimensional coordination polymers through intramolecular proton transfer

A novel series of one-dimensional coordination polymers (CPs) is achieved via a facile one-pot synthesis strategy employing the nitrate salts of trivalent lanthanides, a pentadentate chelating ligand, and triphenylphosphine oxide at a controlled stoichiometry under ambient conditions. All the CPs are characterized comprehensively using spectroscopic, X-ray crystallographic and magnetometric studies. The CPs are found to be thermally stable up to a significantly high temperature and resistant to water for an indefinite time. They are photoactive and exhibit selective fluoride ion (F-) sensing with excellent efficiency both colorimetrically and fluorimetrically in the solid-state as well as in solution. The presence of F- concomitantly sensitizes the photoluminescence enhancement and visual decolourization of the CPs in solution owing to the ground-state intra-molecular proton transfer. The photophysical response of the CPs to F- in solution was found to be instantaneous (<30 s). The sensitivity of detection is observed to be significantly high over a wide range of F- concentrations, covering the beneficial and detrimental domains of F- concentrations in drinking water. The limit of detection (LoD) under ambient conditions was found to be in the micromolar (μM) range-the best being 0.22 μM found using UV-vis spectrometry and 7.5 μM using fluorimetry. In comparison, the USEPA standard cut-off for the upper limit of F- concentration in drinking water is 211 μM, and the LoD of measuring F- concentration using the USEPA standard method using a fluoride-selective electrode is 26.3 μM. The CPs display markedly high selectivity toward F- with negligible-to-no interference from the commonly abundant ions (Cl-, Br-, I-, CH3CO2-, CO32-, SO42-, HPO42-, NH4+, Na+, K+, Mg2+, and Ca2+) in terms of UV-vis spectral change. Moreover, they also exhibit solid-state IR-spectrometric sensitivity towards F- under ambient conditions.

Bimetallic Organic Frameworks via In Situ Solvothermal Sol-Gel-Crystal and Sol-Crystal Transformation as Durable Electrocatalysts for Oxygen Reduction Reaction

The in situ solvothermal conversion of metal-organic gels (MOGs) to crystalline metal-organic frameworks (MOFs) represents a versatile and ingenious strategy that has been employed for the synthesis of MOF materials with specific morphologies, high yield, and improved functional properties. Herein, we have adopted an in situ solvothermal conversion of bimetallic MOGs to crystalline bimetallic MOFs with the aim of introducing a redox-active metal heterogeneity into the monometallic counterpart. The formation of bimetallic NiZn-MOF and CoZn-MOF via in situ solvothermal sol-gel-crystal and sol-crystal transformation is found to depend on the solvent systems used. The sol-to-gel-to-crystal transformation of NiZn-MOF via the formation of NiZn-MOG is found to occur through the gradual disruption of gel fibers leading to subsequent formation of microcrystals and single crystals of NiZn-MOF. These bimetallic MOFs and MOGs serve as promising electrocatalysts for oxygen reduction reaction (ORR) with an excellent methanol tolerance property, which can be attributed to the enhanced mass and charge transfer, higher oxygen vacancies, and bimetallic synergistic interactions among the heterometals. This work demonstrates a convenient strategy for producing bimetallic MOGs to MOFs through the introduction of a redox-active metal heterogeneity in the inorganic hybrid functional materials for fundamental and applied research. Our results connect MOGs and MOFs which have been regarded as having opposite physical states, that is, soft vs hard, and provide promising structural correlation between MOGs and MOFs at the molecular level.

Luminescent Supramolecular Ionic Frameworks based on Organic Fluorescent Polycations and Polyanionic Phosphorescent Metal Clusters

Emissive ionic supramolecular frameworks are designed by associating tetraphenylethylene-based tetra-cationic units and di-anionic molybdenum or tetra-anionic rhenium octahedral clusters. Obtained structures were characterized by single-crystal X-ray diffraction. The emission properties of the hybrids were investigated as dry powders or in various solvents by one photon and two photon absorption leading to a O2 concentration dependent luminescence color for the Mo based hybrid.

Eu3+ doped ethylenediamine functionalized UiO-66 probe for fluorescence sensing of formaldehyde

The development of probes with selectivity and prompt detection of aldehydes molecules is of great importance for protecting human health and public security. Herein, a system based on ethylenediamine (EDA) functionalized and Eu3+-doped UiO-66, namely EDA-Eu3+@UiO-66, was designed to detect formaldehyde molecules. Based on the "antenna effect" of lanthanide elements, UiO-66 transfers the absorbed energy to Eu3+ ions and emits characteristic fluorescence belonging to Eu3+. By using the fluorescence peaks of UiO-66 and Eu3+ respectively, a ratiometric fluorescence sensing probe can be constructed. Formaldehyde molecules react with the -NH2 on the surface of EDA-Eu3+@UiO-66 through an aldehyde-amine condensation reaction and connect to the functionalized surface of UiO-66. Due to the absorption of excitation light energy by formaldehyde molecules, the energy transfer efficiency from UiO-66 to Eu3+ ions is reduced, resulting in the fluorescence quenching of EDA-Eu3+@UiO-66, thus achieving selective detection of formaldehyde. The fabricated sensing platform successfully detected residual formaldehyde in frozen shrimp tail samples. The system was also used to respond to formaldehyde vapor, and a significant fluorescence quenching effect was observed. This strategy provides a sensitive, selective, and reliable method for the visual sensing of formaldehyde.

Solvent- and pH-Stable Eu(III)-Based Metal-Organic Framework with Phosphate-Ratio Fluorescence Sensing and Significant Proton Conduction

Lanthanide-based metal-organic frameworks show good potential for applications due to their unique structures and functional properties. A highly thermally and acid-base stable Eu-MOF was synthesized by a solvothermal method with the molecular formula {[(CH3)2NH2]2[Eu2(NDDP)2(H2O)2]·H2O}n (Eu-MOF, H4NDDP = 5,5'-(naphthalene-2,6-diyl)diisophthalic acid). Eu-MOF takes a three-dimensional (4,4,8)-connected topology. The water molecules involved in the coordination, free water molecules, and [(CH3)2NH2]+ cations in the pore can be used as proton carriers. The proton conductivity attains 1.25 × 10-4 S cm-1 at room temperature and 2.42 × 10-3 S cm-1 at 70 °C and 98% relative humidity. Combined with the dual-emission properties from the ligands and Eu(III) ions enables Eu-MOF to be used as a ratiometric fluorescent sensor for phosphate efficiently and rapidly, with a limit of detection of 0.12 μM in the Tris-HCl buffer solution. These results provide a new approach for the construction of MOFs with high proton conductivity and a ratiometric fluorescence response.

Advantages of Bimetallic Organic Frameworks in the Adsorption, Catalysis and Detection for Water Contaminants

The binary metal organic framework (MOF) is composed of two heterometallic ions bonded to an organic ligand. Compared with monometallic MOFs, bimetallic MOFs have greatly improved in terms of structure, porosity, active site, adsorption, selectivity, and stability, which has attracted wide attention. At present, many effective strategies have been designed for the synthesis of bimetallic MOF-based nanomaterials with specific morphology, structure, and function. The results show that bimetallic MOF-based nanocomposites could achieve multiple synergistic effects, which will greatly improve their research in the fields of adsorption, catalysis, energy storage, sensing, and so on. In this review, the main preparation methods of bimetallic MOFs-based materials are summarized, with emphasis on their applications in adsorption, catalysis, and detection of target pollutants in water environments, and perspectives on the future development of bimetallic MOFs-based nanomaterials in the field of water are presented.

Bimetallic Metal-Organic Frameworks (BMOF) and BMOF- Incorporated Membranes for Energy and Environmental Applications

Bimetallic metal organic frameworks (BMOFs) are a class of crystalline solids and their structure comprises two metal ions in the lattice. BMOFs show a synergistic effect of two metal centres and enhanced properties compared to MOFs. By controlling the composition and relative distribution of two metal ions in the lattice the structure, morphology, and topology of BMOFs could be regulated resulting in an improvement in the tunability of pore structure, activity, and selectivity. Thus, developing BMOFs and BMOF incorporated membranes for applications such as adsorption, separation, catalysis, and sensing is a promising strategy to mitigate environmental pollution and address the looming energy crisis. Herein we present an overview of recent advancements in the area of BMOFs and a comprehensive review of BMOF incorporated membranes reported to date. The scope, challenges as well as future perspectives for BMOFs and BMOF incorporated membranes are presented.

Metal-Organic Frameworks-Based Optical Nanosensors for Analytical and Bioanalytical Applications

Metal-organic frameworks (MOFs)-based optical nanoprobes for luminescence and surface-enhanced Raman spectroscopy (SERS) applications have been receiving tremendous attention. Every element in the MOF structure, including the metal nodes, the organic linkers, and the guest molecules, can be used as a source to build single/multi-emission signals for the intended analytical purposes. For SERS applications, the MOF can not only be used directly as a SERS substrate, but can also improve the stability and reproducibility of the metal-based substrates. Additionally, the porosity and large specific surface area give MOF a sieving effect and target molecule enrichment ability, both of which are helpful for improving detection selectivity and sensitivity. This mini-review summarizes the advances of MOF-based optical detection methods, including luminescence and SERS, and also provides perspectives on future efforts.

Facile Solvent-Free Mechanochemical Synthesis of UI3 and Lanthanoid Iodides

Lewis base-free lanthanoid (Ln) and actinoid (An) iodides are difficult to obtain, as standard protocols describe syntheses in solutions of donor solvents which are ultimately hard to remove. We have now established a mechanochemical approach towards the synthesis of Lewis base-free f-block metal iodides with excellent yields. In particular, we describe herein the synthesis of EuI2 as an example of a divalent lanthanoid iodide, of CeI3 as an example of a trivalent lanthanoid iodide, and of UI3 as the most important actinoid iodide. Each can be obtained in high yield with minimal work-up, presenting the most efficient and simple synthetic route to access these materials to date.

Expanding the Knowledge of the Selective-Sensing Mechanism of Nitro Compounds by Luminescent Terbium Metal-Organic Frameworks through Multiconfigurational ab Initio Calculations

The current research shows that the excited-state dynamics of the antenna ligand, both in the interacting system sensor/analyte and in the sensor without analyte, is a safe tool for elucidating the detection principle of the luminescent lanthanide-based metal-organic framework sensors. In this report the detection principle of the luminescence quenching mechanism in two Tb-based MOFs sensors is elucidated. The first system is a luminescent Tb-MOF [Tb(BTTA)_1.5(H₂O)_4.5]_n (H₂BTTA = 2,5-bis(1H-1,2,4-triazol-1-yl) terephthalic acid) selective to nitrobenzene (NB), labeled as Tb-1. The second system is {[Tb(DPYT)(BPDC)_1/2(NO₃)]·H₂O}_n (DPYT = 2,5-di(pyridin-4-yl) terephthalic acid, BPDC = biphenyl-4,4'-dicarboxylic acid), reported as a selective chemical sensor to nitromethane (NM) in situ, labeled as Tb-2. The luminescence quenching of the MOFs is promoted by intermolecular interactions with the analytes that induce destabilization of the T₁ electronic state of the linker "antenna", altering thus the sensitization pathways of the Tb atoms. This study demonstrates the value of host-guest interaction simulations and the rate constants of the radiative and nonradiative processes in understanding and elucidating the sensing mechanism in Ln-MOF sensors.

Robust Carbazole-Based Rare-Earth MOFs: Tunable White-Light Emission for Temperature and DMF Sensing

Rare-earth metal-organic frameworks (RE-MOFs) are an attractive platform to construct luminescent materials for practical applications in lighting, optoelectronics, and sensing. By adjusting the metal composition in mixed RE-MOFs, one can not only realize tunable emission but also construct ratiometric luminescent sensors. As such, it is highly desirable to prepare robust RE-MOFs that display efficient, multifunctional sensing capability. In this work, we designed and synthesized a series of RE-MOFs that exhibit both excellent thermal and chemical stability due to the incorporation of a bulky tert-butyl group on a new carbazole-based ligand. By rationally tuning the molar ratio of Eu³⁺/Tb³⁺/Y³⁺, a white-light-emitting MOF was developed as an excellent thermal sensor that exhibits a temperature-induced ratiometric luminescence response between 278 and 378 K. After removing the coordinated solvent molecules via thermal treatment, the desolvated MOF materials exhibit excellent turn-on or color change sensitivity to recognize dimethylformamide (DMF) molecules. Such high sensitivity is attributed to the DMF coordination that induces the framework structure change and shifts the ligand's excited-state energy level to facilitate the ligand-to-metal energy transfer process. Taking together, NPF-700-RE represents a new class of robust, tunable luminescent materials that have great potential in white-light emission and thermal- and DMF-sensing applications.

Design of Pd-Zn Bimetal MOF Nanosheets and MOF-Derived Pd3.9Zn6.1/CNS Catalyst for Selective Hydrogenation of Acetylene under Simulated Front-End Conditions

Novel zinc-palladium-porphyrin bimetal metal-organic framework (MOF) nanosheets were directly synthesized by coordination chelation between Zn(II) and Pd(II) tetra(4-carboxyphenyl)porphin (TCPP(Pd)) using a solvothermal method. Furthermore, a serial of carbon nanosheets supported Pd-Zn intermetallics (Pd-Zn-ins/CNS) with different Pd: Zn atomic ratios were obtained by one-step carbonization under different temperature using the prepared Zn-TCPP(Pd) MOF nanosheets as precursor. In the carbonization process, Pd-Zn-ins went through the transformation from PdZn (650 °C) to Pd3.9Zn6.1 (~950 °C) then to Pd3.9Zn6.1/Pd (1000 °C) with the temperature increasing. The synthesized Pd-Zn-ins/CNS were further employed as catalysts for selective hydrogenation of acetylene. Pd3.9Zn6.1 showed the best catalytic performance compared with other Pd-Zn intermetallic forms.

Single-Molecule Tunneling Sensors for Nitrobenzene Explosives

The tunneling current through the single-molecule junctions principally offers the ultimate solution for chemical and biochemical sensing via the interactions between probes and target analytes at the single-molecule level. However, it remains unexplored to achieve the sensitive and selective detection of targeted analytes using single-molecule junction techniques due to the challenge in quantitative evaluation of sensing sensitivity and selectivity. Herein, we demonstrate a single-molecule tunneling sensor for the highly sensitive and selective detection of nitrobenzene explosives using scanning tunneling microscope break junction (STM-BJ). Taking advantage of π-π stacking interactions between the molecular probes and nitrobenzene explosives, we use a spectral clustering algorithm to assign the signal of probes and π-stacked probes for sensitively detecting the targeted analytes and the distinguishable conductance change of probes when interacting with different nitroaromatic explosive compounds for selective detection. We find that pronounced conductance changes up to 0.8 orders of magnitude when the probes interact with TNT. Also, we obtain a sensitivity of up to ∼10 pM for TNT and high sensitivity for eight TNT analogues. Combined with theoretical calculations, we discover that the harness of the destructive quantum interference of the probe M1OH after interacting with TNT leads to high selectivity in sensing with TNT. Our work demonstrates the great potential of the single-molecule tunneling current for environmental sensing molecules with high selectivity and sensitivity.

ZnAl2O4 Nanomaterial as a Naked-Eye Arsenate Sensor: A Combined Experimental and Computational Mechanistic Approach

Raising public awareness over the emerging health risk due to intake of arsenic-contaminated potable water is a matter of great concern. Exploration of cost-effective, self-testing kits is a substantial way to reach out to the masses and detect the presence of arsenate in water. With this agenda, a photoluminescent Mannich base Zn(II) complex (ZnMC = [Zn₂(ML)₂]·(ClO₄)₂·(H₂O); HML = Mannich base ligand) has been synthesized, and its dinuclearity was verified with single-crystal X-ray diffraction structural analysis. Among a range of anions, ZnMC was found to detect arsenate selectively by showing a turn-off emission with a color change from bright green to dark under UV light. The real-life applicability of the ZnMC probe is somewhat restricted to only sensing of arsenate, but not its removal owing to the fact of its homogeneity. Considering the efficacy of ZnMC as well as a need for its easy removal from water, slight modification has been done with chloride ions in the form of ZnMC″ (=[Zn₂(ML)₂(Cl)₂]), and finally, an interface between homogeneous and heterogeneous solid support has been explored with a strategic fabrication of ZnMC″ grafted ZnAl₂O₄, named as ZAZ nanomaterial. This not only imparts successful segregation of arsenate from drinking water but also provides naked-eye detection under ambient light as well as UV light. Thermodynamic parameters associated with the binding of arsenate to ZnMC and ZAZ have been evaluated through isothermal calorimetric (ITC) measurements. Steady-state and time-resolved fluorescence titration study, absorption titration study, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and computational calculations have been performed to get deep insights into the sensing properties. Proper justification of the sensing mechanism is the highlight of this work. ZAZ nanomaterial has been exploited to produce a self-test paper kit for arsenate detection with a limit of 9.86 ppb, which potentially enables applications in environmental monitoring.

Aggregation-Induced Luminescence Based UiO-66: Highly Selective Fast-Response Styrene Detection

One of the main pollutants in indoor air is volatile organic compounds (VOCs), which can cause great harm to human health. So the development of a VOC detection technology is of great significance. In this work, a tetraphenylethylene-functionalized UiO-66 based on aggregation-induced emission was successfully prepared. The UiO-66-TBPE structure exhibits the characteristic blue emission of TBPE ligands under UV excitation and can be used as a luminescence sensor for fast and efficient detection of VOCs. More importantly, UiO-66-TBPE has a high fluorescence sensing selectivity in p-xylene and styrene vapor. To further improve the practical performance, we combined UiO-66-TBPE with the polymer polyacrylate (PA) to obtain a flexible hybrid membrane with fast detection performance for styrene vapor within the 30 s. The deeper sensing mechanism of p-xylene and styrene inducing different fluorescence enhancement and fluorescence quenching is explained by a combination of modern characterization techniques and computer simulation. Finally, we applied UiO-66-TBPE/PA to leather and still maintained a good sensing performance. It provides a potential way for the application of fluorescent metal-organic frameworks (MOFs) to detect VOCs in daily life.

Multi-Emission from Single Metal-Organic Frameworks under Single Excitation

Multi-emission materials have come to prominent attention ascribed to their extended applications other than single-emission ones. General and robust design strategies of a single matrix with multi-emission under single excitation are urgently required. Metal-organic frameworks (MOFs) are porous materials prepared with organic ligands and metal nodes. The variety of metal nodes and ligands makes MOFs with great superiority as multi-emission matrices. Guest species encapsulated into the channels or pores of MOFs are the additional emission sites for multi-emission. In this review, multi-emission MOFs according to the different excitation sites are summarized and classified. The emission mechanisms are discussed, such as antenna effect, excited-state intramolecular proton transfer (ESIPT) and tautomerism for dual-emission. The factors that affect the emissions are revealed, including ligand-metal energy transfer and host-guest interaction, etc. Multi-emission MOFs could be predictably designed and prepared, once the emissive factors are controlled rationally in combination with the different multi-emission mechanisms. Correspondingly, new and practical applications are realized, including but not limited to ratiometric/multi-target sensing and bioimaging, white light-emitting diodes, and anti-counterfeiting. The design strategies of multi-emission MOFs and their extensive applications are reviewed. The results will shed light on other multi-emission systems to develop the structure-derived functionality and applications.

Cross-Linked Polyphosphazene Nanospheres Boosting Long-Lived Organic Room-Temperature Phosphorescence

Long-lived organic room-temperature phosphorescence (RTP) has sparked intense explorations, owing to the outstanding optical performance and exceptional applications. Because triplet excitons in organic RTP experience multifarious relaxation processes resulting from their high sensitivity, spin multiplicity, inevitable nonradiative decay, and external quenchers, boosting RTP performance by the modulated triplet-exciton behavior is challenging. Herein, we report that cross-linked polyphosphazene nanospheres can effectively promote long-lived organic RTP. Through molecular engineering, multiple carbonyl groups (C═O), heteroatoms (N and P), and heavy atoms (Cl) are introduced into the polyphosphazene nanospheres, largely strengthening the spin-orbit coupling constant by recalibrating the electronic configurations between singlet (S_n) and triplet (T_n) excitons. In order to further suppress nonradiative decay and avoid quenching under ambient conditions, polyphosphazene nanospheres are encapsulated with poly(vinyl alcohol) matrix, thus synchronously prompting phosphorescence lifetime (173 ms longer), phosphorescence efficiency (∼12-fold higher), afterglow duration time (more than 20 s), and afterglow absolute luminance (∼19-fold higher) as compared with the 2,3,6,7,10,11-hexahydroxytriphenylene precursor. By measuring the emission intensity of the phosphorescence, an effective probe based on the nanospheres is developed for visible, quantitative, and expeditious detection of volatile organic compounds. More significantly, the obtained films show high selectivity and robustness for anisole detection (7.1 × 10^-4 mol L^-1). This work not only demonstrates a way toward boosting the efficiency of RTP materials but also provides a new avenue to apply RTP materials in feasible detection applications.

Design and Multiple Applications of Mixed-Ligand Metal-Organic Frameworks with Dual Emission

Herein, we revealed the factors that affect the emission in mixed-ligand metal-organic frameworks (MOFs) with the combination of terephthalic acid (BDC), 2-aminoterephthalic acid (BDC-NH₂), and 2,5-dihydroxylterephthalic acid [BDC-(OH)₂] as models. The -NH₂ and -(OH)₂ groups change the π-conjugation and luminescence behaviors than BDC, so the ligands show different optical behaviors. The Zn²⁺ ion with a 3d¹⁰ full electronic structure shows little effect on the emission of the ligand and is selected as the metal node. We found that the emission of BDC is weak and incompatible to that of BDC-NH₂, so only the emission of BDC-NH₂ was observed in the BDC/BDC-NH₂-MOF. Crosstalk occurs between the emissions from BDC and BDC-(OH)₂ for the single emission from BDC/BDC-(OH)₂-MOFs, even different ratios are selected. The MOFs prepared with BDC-NH₂ and BDC-(OH)₂ show dual emission at 450 and 550 nm, while the relative intensity was easily tuned with the ligand ratio and excitation wavelength. Thus, abundant optical behaviors and extensive applications were realized, including but not limited to (1) dual emission from single MOFs, (2) tunable color from blue to yellow with the excitation from 290 to 370 nm for information encryption and decryption, (3) white emission obtained under an excitation of 330 nm, and (4) response of -NH₂ groups to HCHO and Fe³⁺ ions for ratiometric fluorescence sensing and visual detection. This work revealed the factors that affect the emission in mixed-ligand MOFs, studied their optical behaviors, and realized different applications with single MOFs.

Luminescent Dimeric Oxalate-Bridged Eu3+/Tb3+-Implanted Arsenotungstates: Tunable Emission, Energy Transfer, and Detection of Ba2+ Ion in Aqueous Solution

Two cases of lanthanide (Ln)-implanted arsenotungstates, K₁₇Na₂H₅[{(As₂W₁₉O₆₇(H₂O))Ln(H₂O)₂}₂(C₂O₄)]·87H₂O (Ln = Eu (1), Ln = Tb (2)) and their codoped derivatives Eu_xTb_1-x-POM (x = 0.01 (3), x = 0.04 (4), x = 0.1 (5), x = 0.2 (6)) were prepared and further characterized by powder X-ray diffraction, infrared spectra, and thermogravimetric analyses. An X-ray structural analysis of 1 and 2 indicates that they both present a dimeric oxalate-bridged Ln³⁺-implanted lanthanide arsenotungstate polyanion structure. Under the O → W LMCT excitation at 265 nm of arsenotungstate polyanions, the emissions of Ln³⁺ ions in 1 and 2 are sensitized and the lifetimes are prolonged. Codoped compounds 3-6 demonstrate a color-tunable emission from green to red by adjusting the Eu³⁺/Tb³⁺ ratio. Emission spectra and time-resolved emission spectroscopic studies were performed for 3 to further authenticate the energy transfer processes from excited arsenotungstates to the Eu³⁺ and Tb³⁺ metal ions and also between the Eu³⁺ and Tb³⁺ centers. More interestingly, 1 is an effective fluorescent probe for the recognition and detection of Ba²⁺ ions in aqueous solution. The optical properties of the Ln-implanted arsenotungstate compounds not only expressly reveal distinctive energy transfer processes in those compounds but also broaden the application of POM-based materials in the fluorescence sensing field.

Zn(ii) and Co(ii) coordination polymers based on semi-rigid bis-pyridyl-bis-amide and angular dicarboxylate ligands: synthesis, structures and properties

Hydro(solvo)thermal reactions of N,N′-di(3-methylpyridyl)oxalamide (L1) and N,N′-di(4-methylpyridyl)oxalamide (L2) with angular dicarboxylic acids and metal salts afforded six new coordination polymers showing interesting properties.

2-Dimensional rare earth metal–organic frameworks based on a hexanuclear secondary building unit as efficient detectors for vapours of nitroaromatics and volatile organic compounds

A new family of microporous 2-dimensional rare earth metal organic frameworks based on a hexanuclear secondary building unit with capability to selectively detect vapours of volatile organic compounds and nitroaromatic explosives is reported.

Metal–organic frameworks (MOFs) as fluorescence sensors: principles, development and prospects

This review classifies the latest developments of MOF-based fluorescence sensors according to the analytes, and discusses the challenges faced by MOF-based fluorescence sensors and promotes some directions for future research.

An emissive dual-sensitized bimetallic Eu2III-bioprobe: design strategy, biological interactions, and nucleolus staining studies

A dual sensitized Eu2III–bioprobe (1) offers incredible opportunities for fine-tuning and exploring a strongly luminescent probe as a nucleolus staining agent.

Stimuli-Responsive Metal-Organic Framework on a Metal-Organic Framework Heterostructure for Efficient Antibiotic Detection and Anticounterfeiting

Stimuli-responsiveness is an important characteristic that show promising potential in various applications. Herein, a novel ZIF-8-on-Tb-dpn (H₃dpn = 5-(2',4'-dicarboxylphenyl)nicotic acid) heterostructure is constructed using a heteroepitaxial strategy combining the chemical-responsive (antibiotics) and light-responsive behaviors. The pyridine nitrogen of Tb-dpn acts as an anchor site for Zn²⁺, which helps to overcome the limit of lattice mismatch between two metal-organic frameworks (MOFs) and promotes the growth of ZIF-8 nanocrystals. Based on the synergy effect of two MOFs, ZIF-8-on-Tb-dpn exhibits an efficient turn-off response toward tetracycline and chloramphenicol via competitive absorption, Förster resonance energy transfer, and photoinduced electron transfer processes with limit of detection values of 5.6 and 37.6 nM, respectively, which are three- to -fivefold lower than those of Tb-dpn. Moreover, the nanocage of ZIF-8 is utilized to encapsulate photochromic spiropyran (SP) molecules and realize the reversible conversion between SP and merocyanine (MC) under visible light and ultraviolet light. The MC form is accompanied with strong adsorption at 555 nm, which can erase the emission of Tb³⁺. Therefore, a reversible invisible anticounterfeiting pattern is designed with SP ⊂ ZIF-8-on-Tb-dpn for information anticounterfeiting. The excellent stimuli-responsive ability makes the luminescent platform a potential candidate in luminescence applications.

Ultrastable Tb-Organic Framework as a Selective Sensor of Phenylglyoxylic Acid in Urine

Industrial pollution and harmful chemicals seriously affect environment and human health. Styrene is a common air toxicant with widespread exposure sources, including smoking, automobile exhaust, and plastic pollutants. Phenylglyoxylic acid (PGA) is a typical biomarker for exposed styrene. Therefore, it is crucial to quickly identify and quantitatively detect PGA. Herein, an ultrastable terbium metal-organic framework (Tb-MOF 1) was developed, and the luminescence film (1/PLA) consisting of polylactic acid (PLA) and 1 was fabricated as a sensor for rapid detection of PGA. The sensor possesses the advantages of efficient detection [limit of detection (LOD) is 1.05 × 10^-4 mg/mL] and rapid response speed (less than 10 s) for PGA in urine. Furthermore, this sensor exhibits high stability, outstanding anti-interference ability, and excellent recyclability. Based on this film technology, a paper-based probe was then developed for portable and convenient detection. The probe could easily distinguish different concentrations of PGA under the naked eye toward practical sensing applications. Meanwhile, photoinduced electron transfer was demonstrated to be responsible for the luminescence sensing. Hence, this study indicates that Tb-MOF is a promising material to detect PGA for evaluating the effect of styrene on the body.

Mixed functionalization strategy on indium-organic framework for multiple ion detection and H2O2 turn-on sensing

A special functional group mediated functionalization platform is introduced as a new and versatile platform tool to improve the fluorescence detection performance of metal-organic frameworks (MOF). The creation of a mixed-functionalization strategy on a MOF realizes the high sensitivity detection of heavy metal ions, anions and small molecules. In this work, we have first reported a novel amino functionalized 3D indium MOF [In(BDC-NH2)(OH)]n (In1-NH2) which not only has an excellent fluorescent characteristic but also shows highly sensitive identification of Fe3+, Cu2+, Pb2+ and ClO- in water with broad linear ranges and short response times. Subsequently, based on the remaining amino group site of In1-NH2, a post-synthetic modification strategy is utilized to introduce an active boronic acid group for hydrogen peroxide detection. The obtained PBA-In1 exhibits an efficient sensing performance for hydrogen peroxide with an LOD of 0.42 μM. Given this, PBA-In1 is expected to become an effective probe to monitor the formation of metabolites in humans. In1-NH2 successfully achieves multiple ion detection and the PBA-In1 sensing platform with boronic acid functionalization may have good application prospects in biochemical research in the future.

Fluorescent sensors for aldehydes based on luminescent metal-organic frameworks

Volatile aldehydes cause great harm to human health and the living environment, and the detection of aldehydes has attracted much attention from chemists and material scientists. In recent years, as one of the most promising classes of functional materials, luminescent metal-organic frameworks (LMOFs) have bloomed as fluorescent sensors for the detection of aldehydes. Herein, the sensing properties of LMOF sensors toward formaldehyde, benzaldehyde, acetaldehyde and other aldehydes have been reviewed, and the sensing mechanism and applications are also illustrated. Additionally, the current status and its potential development prospects in this field are outlined.