Unearthing the Antibacterial Mechanism of Medicinal Clay: A Geochemical Approach to Combating Antibiotic Resistance

Antibacterial mechanism of Malaysian Carey clay against food-borne Staphylococcus aureus

Depending on their chemical structure and geochemistry, clay minerals can display potent antibacterial properties against a range of bacterial pathogens. Malaysian Carey clay was evaluated for its antibacterial activity against food-borne Staphylococcus aureus ATCC 13565 strains. The minimum inhibitory concentration (MIC) and minimum bactericidal activity (MBC) of both Carey clay leachates and suspension were 125 mg/mL and 250 mg/mL, respectively. Time-kill assay revealed that 2x MIC and 4x MIC Carey clay in both leachate and suspension forms resulted in complete killing of S. aureus. Antibacterial mechanism was investigated through imaging of bacterial morphology using TEM and determination of reactive oxygen species (ROS) using NBT assay. Imaging of bacterial morphology using TEM showed abnormalities, including disrupted cell walls following exposure to Carey clay, and the antibacterial activity was associated with generation of ROS. Our study suggests that Carey clay displays promising functionality as a natural antibacterial agent in the food industry.

The application of synthetic antibacterial minerals to combat topical infections: exploring a mouse model of MRSA infection

The development of new antibiotics has stalled, and novel strategies are needed as we enter the age of antibiotic resistance. Certain naturally occurring clays have been shown to be effective in killing antibiotic resistant bacteria. However, these natural clays are too variable to be used in clinical settings. Our study shows that synthetic antibacterial minerals exhibit potent antibacterial activity against topical MRSA infections and increase the rate of wound closure relative to controls. The antibacterial minerals maintain a redox cycle between Fe2+/Fe3+ and the surfaces of pyrite minerals, which act as a semiconductor and produce reactive oxygen species (ROS), while smectite minerals act as a cation exchange reservoir. Acidic conditions are maintained throughout the application of the hydrated minerals and can mitigate the alkaline pH conditions observed in chronic non-healing wounds. These results provide evidence for the strategy of 'iron overload' to combat antibiotic resistant infections through the maintained release of Fe2+ and generation of ROS via distinct geochemical reactions that can break the chronic wound damage cycle.

Parrot Dietary Habits and Consumption of Alternate Foodstuffs

Inappropriate diets cause many of the health problems commonly reported in parrots by psittaculturists and veterinarians. The dietary management of captive parrots would benefit from information derived from studies of dietary habits of wild parrots; however, it is unclear how complete this body of knowledge is at this time. Documentation of parrots' dietary habits appears to have grown dramatically over the past century. Reports of parrots consuming a number of foodstuffs beyond the reproductive parts of plants (alternate foodstuffs) have increased. The extent of alternate foodstuffs in parrot diets is currently unknown. We used Google search engines (ie, Scholar, Videos, Images) to determine how well psittaciform dietary habits have been studied to date and to quantify reports of alternate foodstuffs consumption among genera of Psittaciformes. We found that the dietary habits of over 43% of parrot species are poorly resolved. The dietary habits of 71.5% of parrot species classified by the International Union for Conservation of Nature as at risk of extinction are not well resolved. Parrots' consumption of alternate foodstuffs occurred at the following rates at the genus level: 91.2% foliage, 76.9% terrestrial invertebrates and fine earthen materials, 74.7% wood, 44% pure minerals, 34.1% vertebrates (9.9% dung), 29.7% sap, 19.8% roots, 17.6% charcoal, 18.7% epiphytes, 16.5% coarse earthen materials, 8.8% algae, and 6.6% aquatic invertebrates. Of these reports, 79.1% involved observations of wild parrots. Many parrot species may be more omnivorous than previously realized. Alternate foodstuffs are generally absent from current veterinary-based dietary recommendations for captive parrots. Future studies are needed to determine whether providing alternate foodstuffs to captive parrots can be used as a means to improve their diets and thus their health, welfare, and reproductive success.

Structural and mineralogical variation upon reoxidation of reduced Fe-bearing clay minerals during thermal activation

The hydroxyl radicals (OH) produced from Fe(II) oxidation upon reoxidation of reduced Fe-bearing clay minerals (RFC) have received increased attention and thermal activation was used to enhance Fe(II) oxidation to improve OH production. However, changes in mineral morphology and structure during thermally-activated RFC reoxidation are not yet clear. Herein, the Fe(II) oxidation extent was measured by chemical analysis during the reoxidation of model RFC (reduced nontronite (rNAu-2) at elevated temperatures. Mineralogical variation of rNAu-2 particles was observed by scanning electron microscopy (SEM), Mössbauer spectra, and X-ray photoelectron spectroscopy (XPS). The structural Fe(II) oxidation in rNAu-2 was accelerated with increasing temperature, accompanied by the transformation of structural entities and the dissolution of Fe and Si, while the overall structure of rNAu-2 minerals was relatively intact. The surface microstructure of particles showed the dissolved holes, net-shape flocs, and even large pore channels after Fe(II) oxidation by thermal activation. Moreover, the rearrangement of structural Fe(II) entities, the regeneration of edge Fe(II), and the electron transport from the interior to the edge were enhanced during rNAu-2 reoxidation by thermal activation. The increasing electron transfer at elevated temperatures could possibly be owing to the increasing number of reactive sites by increasing the internal disorder of rNAu-2. This work provides novel insights into the structural and mineralogical changes in promoting electron transfer upon RFC reoxidation.

Optimization of process parameters for trimethoprim and sulfamethoxazole removal by magnetite-chitosan nanoparticles using Box-Behnken design

The contamination of the aquatic environment with antibiotics is among the major and developing problems worldwide. The present study investigates the potential of adsorbent magnetite-chitosan nanoparticles (Fe3O4/CS NPs) for removing trimethoprim (TMP) and sulfamethoxazole (SMX). For this purpose, Fe3O4/CS NPs were synthesized by the co-precipitation method, and the adsorbent characteristics were investigated using XRD, SEM, TEM, pHzpc, FTIR, and VSM. The effect of independent variables (pH, sonication time, adsorbent amount, and analyte concentration) on removal performance was modeled and evaluated by Box-Behnken design (BBD). The SEM image of the Fe3O4/CS adsorbent showed that the adsorbent had a rough and irregular surface. The size of Fe3O4/CS crystals was about 70 nm. XRD analysis confirmed the purity and absence of impurities in the adsorbent. TEM image analysis showed that the adsorbent had a porous structure, and the particle size was in the range of nanometers. In VSM, the saturation magnetization of Fe3O4/CS adsorbent was 25 emu g-1 and the magnet could easily separate the adsorbent from the solution. The results revealed that the optimum condition was achieved at a concentration of 22 mg L-1, a sonication time of 15 min, an adsorbent amount of 0.13 g/100 mL, and a pH of 6. Among different solvents (i.e., ethanol, acetone, nitric acid, and acetonitrile), significant desorption of TMP and SMX was achieved using ethanol. Also, results confirmed that Fe3O4/CS NPs can be used for up to six adsorption/desorption cycles. In addition, applying the Fe3O4/CS NPs on real water samples revealed that Fe3O4/CS NPs could remove TMP and SMX in the 91.23-95.95% range with RSD (n = 3) < 4. Overall, the Fe3O4/CS NPs exhibit great potential for removing TMP and SMX antibiotics from real water samples.

Effect of natural antibacterial clays against single biofilm formation by Staphylococcus aureus and Salmonella Typhimurium bacteria on a stainless-steel surface

Staphylococcus aureus and Salmonella Typhimurium have a propensity to develop biofilms on food contact surfaces, such as stainless-steel, that persist despite rigorous cleaning and sanitizing procedures. Since both bacterial species pose a significant public health risk within the food chain, improved anti-biofilm measures are needed. This study examined the potential of clays as antibacterial and anti-biofilm agents against these two pathogens on appropriate contact surfaces. Natural soil was processed to yield leachates and suspensions of both untreated and treated clays. Soil particle size, pH, cation-exchange capacity, and metal ions were characterized to assess their importance in bacterial killing. Initial antibacterial screening was performed on nine distinct types of natural Malaysian soil using a disk diffusion assay. Untreated leachate from Kuala Gula and Kuala Kangsar clays were found to inhibit S. aureus (7.75 ± 0.25 mm) and Salmonella Typhimurium (11.85 ± 1.63 mm), respectively. The treated Kuala Gula suspension (50.0 and 25.0 %) reduced S. aureus biofilms by 4.4 and 4.2 log at 24 and 6 h, respectively, while treated Kuala Kangsar suspension (12.5 %) by a 4.16 log reduction at 6 h. Although less effective, the treated Kuala Gula leachate (50.0 %) was effective in removing Salmonella Typhimurium biofilm with a decrease of >3 log in 24 h. In contrast to Kuala Kangsar clays, the treated Kuala Gula clays contained a much higher soluble metal content, especially Al (301.05 ± 0.45 ppm), Fe (691.83 ± 4.80 ppm) and Mg (88.44 ± 0.47 ppm). Elimination of S. aureus biofilms correlated with the presence of Fe, Cu, Pb, Ni, Mn and Zn irrespective of the pH of the leachate. Our findings demonstrate that a treated suspension is the most effective for eradication of S. aureus biofilms with a potential as a sanitizer-tolerant, natural antibacterial against biofilms for applications in the food industry.

Effects of Organic Ligands on the Antibacterial Activity of Reduced Iron-Containing Clay Minerals: Higher Extracellular Hydroxyl Radical Production Yet Lower Bactericidal Activity

Reduced iron-containing clay (RIC) minerals have been documented to exhibit antibacterial activity through a synergistic action of extracellular membrane attack and intracellular oxidation of cellular components. However, the relative importance between extracellular and intracellular processes has remained elusive. Here, metal-chelating organic ligands (lactate, oxalate, citrate, and ethylene diaminetetraacetic acid (EDTA)) were amended to the bactericidal assays such that the importance of the two processes could be evaluated. Reduced nontronite (rNAu-2) was used as a model clay mineral to produce extracellular hydroxyl radical (^•OH) upon oxygenation. The presence of Fe-chelating ligands increased ^•OH yield by 3-5 times. Consequently, bacterial cell membrane attack was enhanced, yet the antibacterial activity of RIC diminished. Additional experiments revealed that the ligands inhibited soluble metal ions from adsorption onto the bacterial cell membrane and/or penetration into the cytoplasm. Consequently, intracellular Fe concentration for the ligand-treated group was nearly 2 orders of magnitude lower than that for no-ligand control, which greatly decreased intracellular accumulation of reactive oxygen species (ROS) and increased cell survival. These results highlight that destruction of intracellular contents (proteins and DNA) is more important than oxidative degradation of membrane lipids and cell envelope proteins in causing bacterial cell death by RIC.

Antibacterial Activity of a Natural Clay Mineral against Burkholderia cepacia Complex and Other Bacterial Pathogens Isolated from People with Cystic Fibrosis

There is an impending crisis in healthcare brought about by a new era of untreatable infections caused by bacteria resistant to all available antibiotics. Thus, there is an urgent need to identify novel antimicrobial agents to counter the continuing threat posed by formerly treatable infections. We previously reported that a natural mineral clay known as Kisameet clay (KC) is a potent inhibitor of the organisms responsible for acute infections. Chronic bacterial infections present another major challenge to treatment by antimicrobials, due to their prolonged nature, which results in repeated exposure to antibiotics and a constant selection for antimicrobial resistance. A prime example is bacteria belonging to the Burkholderia cepacia complex (Bcc), which particularly causes some of the most serious chronic lung infections in patients with cystic fibrosis (CF) associated with unpredictable clinical outcomes, poor prognosis, and high mortality rates. Eradication of these organisms from CF patients with limited effective antimicrobial options is a major challenge. Novel therapeutic approaches are urgently required. Here, we report the in vitro antibacterial activity of KC aqueous suspensions (1-10% w/v) and its aqueous extract (L100) against a collection of extensively and multi-drug resistant clinical isolates of Bcc, Pseudomonas aeruginosa, and Stenotrophomonas maltophilia isolated from patients with CF. These findings present a potential novel therapy for further investigation in the clinic.

Buruli Ulcer and Medical Geo-Microbiology

Buruli ulcer is a chronic debilitating infectious disease caused by the pathogen Mycobacterium ulcerans, which can be cured if diagnosed and treated in an early stage. However, advanced cases need antibiotic treatment followed by surgical interventions. In this context, an extremely effective and less expensive treatment modality can be developed by means of an extended topical application of certain selected natural clay minerals, most of the time containing illite-smectite having some iron content. There is a scope for developing the speciality, medical geo-microbiology, which is truly a multidisciplinary one, for finding a cure for the severe and advanced cases of BU.

A Review of Pickering Emulsions: Perspectives and Applications

Pickering emulsions are systems composed of two immiscible fluids stabilized by organic or inorganic solid particles. These solid particles of certain dimensions (micro- or nano-particles), and desired wettability, have been shown to be an alternative to conventional emulsifiers. The use of biodegradable and biocompatible stabilizers of natural origin, such as clay minerals, presents a promising future for the development of Pickering emulsions and, with this, they deliver some advantages, especially in the area of biomedicine. In this review, the effects and characteristics of microparticles in the preparation and properties of Pickering emulsions are presented. The objective of this review is to provide a theoretical basis for a broader type of emulsion, in addition to reviewing the main aspects related to the mechanisms and applications to promote its stability. Through this review, we highlight the use of this type of emulsion and its excellent properties as permeability promoters of solid particles, providing ideal results for local drug delivery and use in Pickering emulsions.

Growth, biofilm formation and atrazine degrading gene (trzN) expression of Arthrobacter sp. DNS10 cultured with montmorillonite, kaolinite and goethite

The viable and degradation potential of the strains which adhered to soil minerals are essential for eliminating organic pollutants from soil. Herein, the interaction (growth, biofilm formation and survive) of Arthrobacter sp. DNS10, an atrazine degrading strain, with three kinds of typical soil minerals, such as montmorillonite, kaolinite and goethite, as well as the atrazine degradation gene (trzN) expression of the strain in the minerals system were studied. The results showed that montmorillonite had significant promotion effect on the growth of strain DNS10, followed by kaolinite, but goethite significantly inhibited the growth of strain DNS10. In contrast, goethite notably promoted the biofilm formation and there was less biofilm detected in montmorillonite containing system. The percentage of the survival bacteria in the biofilm that formed on montmorillonite, kaolinite and goethite was 53.8%, 40.8% and 28.2%. In addition, there were more reactive oxygen species (ROS) were detected in the cells that exposed to goethite than those of the cells exposed to kaolinite and montmorillonite. These results suggest that the electrostatic repulsion between kaolinite/montmorillonite and strain DNS10 prevents them from contacting each other and facilitates bacterial growth by allowing the strain to obtain more nutrients. Oppositely, the needle-like morphology of goethite might damage the strain DNS10 cell when they were combined by electrostatic attraction, and the goethite induced ROS also aggravate the cytotoxicity of goethite on strain DNS10. In addition, the relative transcription of trzN in the cells contacted with montmorillonite, kaolinite and goethite was 0.94-, 0.27- and 0.20- fold of the no mineral exposure treatment. Briefly, this research suggests that the minerals with different structure and/or physicochemical characteristics might cause various trend for the biofilm formation and degradation potential of the bacteria.

Modified aluminosilicates display antibacterial activity against nontuberculous mycobacteria and adsorb mycolactone and Mycobacterium ulcerans in vitro

Mycobacterium ulcerans (MU) infection of skin and soft tissue leads to chronic skin ulceration known as Buruli ulcer. MU releases a lipid-like toxin, mycolactone, that diffuses into the tissue, effecting disease through localized tissue necrosis and immunosuppression. Cutaneous Buruli ulcer wounds slowly advance from a painless pre-ulcerative stage to an ulcerative lesion, leading to disparities in the timing of medical intervention and treatment outcomes. Novel Buruli ulcer wound management solutions could complement and supplement systemically administered antimicrobials and reduce time to healing. Capitalizing on nanopore structure, adsorption, and exchange capacities, aluminosilicate nanozeolites (nZeos) and geopolymers (GPs) were developed and investigated in the context of therapeutics for mycobacterial disease ulcerative wound care. nZeos were ion exchanged with copper or silver to assess the antimicrobial activity against MU and Mycobacterium marinum, a rapid growing, genetic ancestor of MU that also causes skin and soft tissue infections. Silver- and copper-exchanged nZeos were bactericidal against MU, while only silver-exchanged nZeos killed M. marinum. To mediate adsorption at a biological scale, GPs with different pore sizes and altered surface modifications were generated and assessed for the ability to adsorb MU and mycolactone. Macroporous GPs with and without stearic acid modification equivalently adsorbed MU cells, while mesoporous GPs with stearic acid adsorbed mycolactone toxin significantly better than mesoporous GPs or GPs modified with phenyltriethoxysilane (PTES). In cytotoxicity assays, Cu-nZeos lacked toxicity against Detroit 551, U-937, and WM-115 cells. GPs demonstrated limited cytotoxicity in Detroit 551 and WM-115, but produced time-dependent toxicity in U-937 cells. With their large surface area and adsorptive capacities, aluminosilicates nZeos and GPs may be modified and developed to support conventional BU wound care. Topical application of nZeos and GPs could kill MU within the cutaneous wound environment and physically remove MU and mycolactone with wound dressing changes, thereby improving wound healing and overall patient outcomes.

The Effects of Blue Light on Human Fibroblasts and Diabetic Wound Healing

Diabetes is a serious threat to global health and is among the top 10 causes of death. The Diabetic foot ulcer (DFU) is among the most common and severe complications of the disease. Bacterial infections are common; therefore, timely aggressive management, using multidisciplinary management approaches is needed to prevent complications, morbidity, and mortality, particularly in view of the growing cases of antibiotic-resistant bacteria. Photobiomodulation (PBM) involves the application of low-level light at specific wavelengths to induce cellular photochemical and photophysical responses. Red and near-infrared (NIR) wavelengths have been shown to be beneficial, and recent studies indicate that other wavelengths within the visible spectrum could be helpful as well, including blue light (400–500 nm). Reports of the antimicrobial activity and susceptibility of blue light on several strains of the same bacterium show that many bacteria are less likely to develop resistance to blue light treatment, meaning it is a viable alternative to antibiotic therapy. However, not all studies have shown positive results for wound healing and fibroblast proliferation. This paper presents a critical review of the literature concerning the use of PBM, with a focus on blue light, for tissue healing and diabetic ulcer care, identifies the pros and cons of PBM intervention, and recommends the potential role of PBM for diabetic ulcer care.

Waste treatment innovation for infusion bottles using soil solution

The amount of medical waste, especially infusion bottles, is a problem for environmental pollution. Improper management of infusion bottle waste can have an impact on disease transmission. The medical waste treatment used high technology and high costs will be a financial burden, so simple and effective treatment innovations is needed. This study uses an experimental method of removing bacteria from infusion bottles using a mixture of water and Andoso soil as a solution for washing infusion bottle waste. The soil solution concentration used in washing was 45% with a contact time of 2 minutes. The experiment was carried out with two repetitions. The treatment effect on decreasing the number of bacteria using a multiple linear regression mathematical model. The results showed that the disinfection process of bacterial-contaminated infusion bottles using water required rinsing up to six times, whereas using 45% andosol soil solution only rinsed once. The effectiveness of the disinfection of infusion bottles contaminated with bacteria using soil solution reduces the number of bacteria by 98%.

A Mini Review of Antibacterial Properties of Al2O3 Nanoparticles

Bacterial antibiotic resistance is one of the most serious modern biomedical problems that prioritizes the search for new agents to combat bacterial pathogens. It is known that nanoparticles of many metals and metal oxides can have an antibacterial effect. However, the antibacterial efficacy of aluminum oxide nanoparticles has been studied little compared to the well-known antimicrobial properties of nanoparticles of oxides of metals such as zinc, silver, iron, and copper. In this review, we have focused on the experimental studies accumulated to date demonstrating the antibacterial effect of aluminum oxide nanoparticles. The review discusses the main ways of synthesis and modification of these nanoparticles, provides the proposed mechanisms of their antibacterial action against gram-positive and gram-negative bacteria, and also compares the antibacterial efficacy depending on morphological characteristics. We have also partially considered the activity of aluminum oxide nanoparticles against water microalgae and fungi. In general, a more detailed study of the antibacterial properties of aluminum oxide nanoparticles is of great interest due to their low toxicity to eukaryotic cells.

Synthetic antibacterial minerals: harnessing a natural geochemical reaction to combat antibiotic resistance

The overuse of antibiotics in clinical and livestock settings is accelerating the selection of multidrug resistant bacterial pathogens. Antibiotic resistant bacteria result in increased mortality and financial strain on the health care and livestock industry. The development of new antibiotics has stalled, and novel strategies are needed as we enter the age of antibiotic resistance. Certain naturally occurring clays have been shown to have antimicrobial properties and kill antibiotic resistant bacteria. Harnessing the activity of compounds within these clays that harbor antibiotic properties offers new therapeutic opportunities for fighting the potentially devastating effects of the post antibiotic era. However, natural samples are highly heterogenous and exhibit variable antibacterial effectiveness, therefore synthesizing minerals of high purity with reproducible antibacterial activity is needed. Here we describe for the first time synthetic smectite clay minerals and Fe-sulfide microspheres that reproduce the geochemical antibacterial properties observed in natural occurring clays. We show that these mineral formulations are effective at killing the ESKAPE pathogens (Enterococcus sp., Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter sp., Pseudomonas aeruginosa and Enterobacter sp.) by maintaining Fe2+ solubility and reactive oxygen species (ROS) production while buffering solution pH, unlike the application of metals alone. Our results represent the first step in utilizing a geochemical process to treat antibiotic resistant topical or gastrointestinal infections in the age of antibiotic resistance.

Separation and Characterization of Cellulose Fibers from Cannabis Bast Using Foamed Nickel by Cathodic Electro-Fenton Oxidation Strategy

Degumming is the most important link in the textile industry. The main purpose of degumming is to effectively remove non-cellulose substances in plant bast fibers. In this research, we propose an electro-Fenton (EF) system with a nickel-foam (Ni-F) cathode in weak acid pH (EF/Ni-F) to degum cannabis fiber in EF while reducing the content of pollutants in degumming wastewater. FT-IR, XPS, XRD, SEM, and TG were employed to thoroughly understand the reaction characteristics to characterize chemical components, element qualities, the crystallinity, and the morphologies of degummed fibers. Additionally, physical and mechanical properties such as breaking strength, elongation at breaking, residual glue rate, whiteness, and diameter of degummed fibers were measured. Through testing, it was found that the fiber degummed by the EF method had higher breaking strength, lower residual tackiness, and higher whiteness than other methods. The antibacterial test was used to detect the effect of fiber on Staphylococcus aureus before and after degumming. EF could remove more colloidal components from cannabis than other methods, and the mechanical properties were also enhanced. The characteristics of the degummed fiber further confirmed the effectiveness of the new degumming method. Moreover, the antibacterial experiment found that the antibacterial property of the degummed fiber was enhanced. The colloidal components in the degumming wastewater were flocculated and precipitated. The upper liquid of the solution had low chromaticity, low COD value, and weak acid pH value, which can meet the discharge requirements. The above test proves that EF is an effective degumming method that is environmentally friendly, takes less time, and enhances antibacterial performance.

NanoSIP: NanoSIMS Applications for Microbial Biology

High-resolution imaging with secondary ion mass spectrometry (nanoSIMS) has become a standard method in systems biology and environmental biogeochemistry and is broadly used to decipher ecophysiological traits of environmental microorganisms, metabolic processes in plant and animal tissues, and cross-kingdom symbioses. When combined with stable isotope-labeling-an approach we refer to as nanoSIP-nanoSIMS imaging offers a distinctive means to quantify net assimilation rates and stoichiometry of individual cell-sized particles in both low- and high-complexity environments. While the majority of nanoSIP studies in environmental and microbial biology have focused on nitrogen and carbon metabolism (using ¹⁵N and ¹³C tracers), multiple advances have pushed the capabilities of this approach in the past decade. The development of a high-brightness oxygen ion source has enabled high-resolution metal analyses that are easier to perform, allowing quantification of metal distribution in cells and environmental particles. New preparation methods, tools for automated data extraction from large data sets, and analytical approaches that push the limits of sensitivity and spatial resolution have allowed for more robust characterization of populations ranging from marine archaea to fungi and viruses. NanoSIMS studies continue to be enhanced by correlation with orthogonal imaging and 'omics approaches; when linked to molecular visualization methods, such as in situ hybridization and antibody labeling, these techniques enable in situ function to be linked to microbial identity and gene expression. Here we present an updated description of the primary materials, methods, and calculations used for nanoSIP, with an emphasis on recent advances in nanoSIMS applications, key methodological steps, and potential pitfalls.

Antibacterial Activity of Clay Soils against Food-Borne Salmonella typhimurium and Staphylococcus aureus

Natural clays have recently been proven to possess antibacterial properties. Effective natural antimicrobial agents are needed to combat bacterial contamination on food contact surfaces, which are increasingly more prevalent in the food chain. This study sought to determine the antibacterial activity of clays against the food-borne pathogens Salmonella typhimurium ATCC 14028 and Staphylococcus aureus ATCC 13565. Soils were processed to yield leachates and suspensions from untreated and treated clays. Soil particle size, pH, cation-exchange capacity, metal composition and mineralogy were characterized. Antibacterial screening was performed on six Malaysian soils via the disc diffusion method. In addition, a time-kill assay was conducted on selected antibacterial clays after 6 h of exposure. The screening revealed that Munchong and Carey clays significantly inhibit Salmonella typhimurium (11.00 ± 0.71 mm) and S. aureus (7.63 ± 0.48 mm), respectively. Treated Carey clay leachate and suspension completely kill Salmonella typhimurium, while S. aureus viability is reduced (2 to 3 log₁₀). The untreated Carey and all Munchong clays proved ineffective as antibacterials. XRD analysis confirmed the presence of pyrite and magnetite. Treated Carey clays had a higher soluble metal content compared to Munchong; namely Al (92.63 ± 2.18 mg/L), Fe (65.69 ± 3.09 mg/L) and Mg (88.48 ± 2.29 mg/L). Our results suggest that metal ion toxicity is responsible for the antibacterial activity of these clays.

Antibacterial Mechanisms of Reduced Iron-Containing Smectite-Illite Clay Minerals

Reduced nontronite has been demonstrated to be antibacterial through the production of hydroxyl radical (^•OH) from the oxidation of structural Fe(II). Herein, we investigated the antibacterial activity of more common smectite-illite (S-I) clays toward Escherichia coli cells, including montmorillonite SWy-3, illite IMt-2, 50-50 S-I rectorite RAr-1, 30-70 S-I ISCz-1, and nontronite NAu-2. Under an oxic condition, reduced clays (with a prefix r before mineral names) produced reactive oxygen species (ROS), and the antibacterial activity followed the order of rRAr-1 > rSWy-3 ≥ rNAu-2 ≫ rIMt-2 ≥ rISCz-1. The strongest antibacterial activity of rRAr-1 was contributed by a combination of ^•OH and Fe(IV) generated from structural Fe(II)/adsorbed Fe²⁺ and soluble Fe²⁺, respectively. Higher levels of lipid and protein oxidation, intracellular ROS accumulation, and membrane disruption were consistent with this antibacterial mechanism of rRAr-1. The antibacterial activity of other S-I clays depended on layer expandability, which determined the reactivity of structural Fe(II) and the production of ^•OH, with the expandable smectite being the most antibacterial and nonexpandable illite the least. Our results provide new insights into the antibacterial mechanisms of clay minerals.

Natural Clay as a Low-Cost Adsorbent for Crystal Violet Dye Removal and Antimicrobial Activity

This investigation aimed at evaluating the efficiency of micro and nanoclays as a low-cost material for the removal of crystal violet (CV) dye from an aqueous solution. The impacts of various factors (contact time, pH, adsorbent dosage, temperature, initial dye concentration) on the adsorption process have been taken into consideration. Six micro and nanoclay samples were obtained by treating clay materials collected from different locations in the Albaha region, Saudi Arabia. Out of the six tested micro and nanoclays materials, two (NCQ1 and NCQ3) were selected based on the highest adsorption efficiency for complete experimentation. The morphology and structure of the selected micro and nanoclay adsorbents were characterized by various techniques: SEM-EDX, FTIR, XRF, XRD, and ICP-MS. The XRF showed that the main oxides of both nanoclays were SiO₂, Al₂O₃, Fe₂O₃, K₂O, CaO, and MgO, and the rest were impurities. All the parameters affecting the adsorption of CV dye were optimized in a batch system, and the optimized working conditions were an equilibrium time of 120 min, a dose of 30 mg, a temperature of 25 °C, and an initial CV concentration of 400 mg/L. The equilibrium data were tested using nonlinear isotherm and kinetic models, which showed that the Freundlich isotherm and pseudo-second-order kinetics gave the best fit with the experimental data, indicating a physico-chemical interaction occurred between the CV dye and both selected micro and nanoclay surfaces. The maximum adsorption capacities of NCQ1 and NCQ3 adsorbents were 206.73 and 203.66 mg/g, respectively, at 25 °C. The thermodynamic factors revealed that the CV dye adsorption of both micro and nanoclays was spontaneous and showed an exothermic process. Therefore, the examined natural micro and nanoclays adsorbents are promising effective adsorbents for the elimination of CV dye from an aqueous environment.

The complex role of microbial metabolic activity in fossilization

Bacteria play an important role in the fossilization of soft tissues; their metabolic activities drive the destruction of the tissues and also strongly influence mineralization. Some environmental conditions, such as anoxia, cold temperatures, and high salinity, are considered widely to promote fossilization by modulating bacterial activity. However, bacteria are extremely diverse, and have developed metabolic adaptations to a wide range of stressful conditions. Therefore, the influence of the environment on bacterial activity, and of their metabolic activity on fossilization, is complex. A number of examples illustrate that simple, general assumptions about the role of bacteria in soft tissue fossilization cannot explain all preservational pathways: (i) experimental results show that soft tissues of cnidaria decay less in oxic than anoxic conditions, and in the fossil record are found more commonly in fossil sites deposited under oxic conditions rather than anoxic environments; (ii) siderite concretions, which often entomb soft tissue fossils, precipitate due to a complex mixture of sulfate- and iron reduction by some bacterial species, running counter to original theories that iron reduction is the primary driver of siderite concretion growth; (iii) arthropod brains, now widely accepted to be preserved in many Cambrian fossil sites, are one of the first structures to decay in taphonomic experiments, indicating that their fossilization processes are complex and influenced by bacterial activity. In order to expand our understanding of the complex process of bacterially driven soft tissue fossilization, more research needs to be done, on fossils themselves and in taphonomic experiments, to determine how the complex variation in microbial metabolic activity influences decay and mineralization.

The role of soils in provision of genetic, medicinal and biochemical resources

Intact, 'healthy' soils provide indispensable ecosystem services that largely depend on the biotic activity. Soil health is connected with human health, yet, knowledge of the underlying soil functioning remains incomplete. This review highlights selected services, i.e. (i) soil as a genetic resource and hotspot of biodiversity, forming the basis for providing (ii) biochemical resources and (iii) medicinal services and goods. Soils harbour an unrivalled biodiversity of organisms, especially microorganisms. Some of the abilities of autochthonous microorganisms and their relevant enzymes serve (i) to improve natural soil functions and in particular plant growth, e.g. through beneficial plant growth-promoting, symbiotic and mycorrhizal microorganisms, (ii) to act as biopesticides, (iii) to facilitate biodegradation of pollutants for soil bioremediation and (iv) to yield enzymes or chemicals for industrial use. Soils also exert direct effects on human health. Contact with soil enriches the human microbiome, affords protection against allergies and promotes emotional well-being. Medicinally relevant are soil substrates such as loams, clays and various minerals with curative effects as well as pharmaceutically active organic chemicals like antibiotics that are formed by soil microorganisms. By contrast, irritating minerals, soil dust inhalation and misguided soil ingestion may adversely affect humans. This article is part of the theme issue 'The role of soils in delivering Nature's Contributions to People.

Cephradine drug release using electrospun chitosan nanofibers incorporated with halloysite nanoclay

The chitosan/polyvinyl alcohol/halloysite nanoclay (CS/PVA/HNC) loaded with cephradine drug electrospun nanofibers (NFs) were fabricated and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) techniques. FTIR analysis confirmed the hydrogen bonding between the polymer chain and the developed siloxane linkages. SEM analysis revealed the formation of uniform NFs having beads free and smooth surface with an average diameter in 50–200 nm range. The thermal stability of the NFs was increased by increasing the HNC concentration. The antimicrobial activity was examined against Escherichia  coli and staphylococcus strains and the NFs revealed auspicious antimicrobial potential. The drug release was studied at pH 7.4 (in PBS) at 37 °C. The drug release analysis showed that 90% of the drug was released from NFs in 2 h and 40 min. Hence, the prepared NFs could be used as a potential drug carrier and release in a control manner for biomedical application.

The ecology and bioactivity of some Greco-Roman medicinal minerals: the case of Melos earth pigments

Mineral compounds, as pigments and therapeutics, appeared regularly in the technical and medical texts of the Greco-Roman (G-R) world. We have referred to them as 'G-R medicinal minerals' and we suggest that despite their seeming familiarity, there are actually many unknowns regarding their precise nature and/or purported pharmacological attributes. Earth pigments are part of that group. This paper presents a brief overview of our work over the past twenty years relating to: a. the attempt to locate a select number of them in the places of their origin; b. their chemical/mineralogical characterization; c. the study of their ecology via the identification of the microorganisms surrounding them; d. their testing as antibacterials against known pathogens. In the process, and to fulfil the above, we have developed a novel methodological approach which includes a range of analytical techniques used across many disciplines (mineralogy, geochemistry, DNA extraction and microbiology). This paper focuses on a select number of earth pigments deriving from the island of Melos in the SW Aegean, celebrated in antiquity for its Melian Earth, a white pigment, and asks whether they might display antibacterial activity. We demonstrate that some (but not all) yellow, green and black earth pigments do. We also show that the manner in which they were dispensed (as powders or leachates) was equally important. The results, although preliminary, are informative. Given their use since deep time, earth pigments have never lost their relevance. We suggest that the study of their ecology/mineralogy and potential bioactivity allows for a better understanding of how our perception of them, as both pigments and therapeutics, may have evolved.

Improving the Antimicrobial and Mechanical Properties of Epoxy Resins via Nanomodification: An Overview

The main purpose of this work is to provide a comprehensive overview on the preparation of multifunctional epoxies, with improved antimicrobial activity and enhanced mechanical properties through nanomodification. In the first section, we focus on the approaches to achieve antimicrobial activity, as well as on the methods used to evaluate their efficacy against bacteria and fungi. Relevant application examples are also discussed, with particular reference to antifouling and anticorrosion coatings for marine environments, dental applications, antimicrobial fibers and fabrics, and others. Subsequently, we discuss the mechanical behaviors of nanomodified epoxies with improved antimicrobial properties, analyzing the typical damage mechanisms leading to the significant toughening effect of nanomodification. Some examples of mechanical properties of nanomodified polymers are provided. Eventually, the possibility of achieving, at the same time, antimicrobial and mechanical improvement capabilities by nanomodification with nanoclay is discussed, with reference to both nanomodified epoxies and glass/epoxy composite laminates. According to the literature, a nanomodified epoxy can successfully exhibit antibacterial properties, while increasing its fracture toughness, even though its tensile strength may decrease. As for laminates-obtaining antibacterial properties is not followed by improved interlaminar properties.

Abiotic dechlorination in the presence of ferrous minerals

Laboratory batch experiments were performed to assess the reduction of trichloroethene (TCE) and oxygen via natural ferrous minerals. TCE reduction under anoxic conditions was measured via the generation of reduced gases, while oxygen reduction via the generation of hydroxyl radicals was measured as a surrogate for potential TCE oxidation. Results showed that TCE reduction under anoxic conditions was observed for ankerite, siderite, and illite, but not for biotite; acetylene was the primary identified dechlorination product. With the exception of biotite, first-order dechlorination rate constants increased with increasing ferrous content of the mineral, with rate constants ranging from 3.1 × 10^-8 to 4.8 10^-7 L g^-1 d^-1. Measured reduction potentials (mV vs SHE) ranged from -104 for illite to +84 for biotite. When normalizing measured first-order dechlorination rate constants to the estimated ferrous iron mineral specific surface area (where surface area was based on nitrogen adsorption analysis of the minerals), TCE dechlorination rate constants increased with increasing reduction potentials. Under oxic conditions, hydroxyl radicals were generated with each of the four minerals. However, mineral activity showed no readily apparent correlation to ferrous content or mineral surface area. In terms of TCE and oxygen reduced per mole of ferrous iron initially present in each mineral, illite was the most reactive of the four minerals. Together, these results suggest that several ferrous minerals may contribute to abiotic dechlorination in the natural environment, and (at least for TCE reduction under anoxic conditions) measurement of ferrous mineral content and reduction potential may serve as useful tools for estimating TCE first-order abiotic dechlorination rate constants.

Antibody-Functionalized Halloysite Nanotubes for Targeting Bacterial Cells

Halloysite nanotubes (HNTs) are naturally occurring tubular clay particles which have emerged in recent years as a promising nanomaterial for numerous applications. Specifically, HNTs’ large pore volume and high specific surface area in combination with their biocompatibility make them ideal nanocarriers for bioactive compounds. This research aims to design and synthesize functionalized HNTs, which could selectively bind to target bacterial cells in suspension. Such a system can allow us to treat target cells within a challenging heterogeneous population, such as contaminated ecosystems or gut flora. HNTs functionalization is achieved by immobilizing specific antibodies onto the nanotube surface. The synthetic route is realized by the following subsequent steps: acidic etching of the HNTs, silanization of reactive surface hydroxyls, conjugation of protein A, and oriented immobilization of the antibody. HNT functionalization is studied by a set of analytical techniques including attenuated total reflectance Fourier-transform infrared spectroscopy, zeta potential measurements, thermal gravimetric analysis, scanning and transmission electron microscopy, as well as fluorescence microscopy. The selective binding of the functionalized HNTs to their target bacteria is observed upon incubation with live homogenous and heterogeneous cultures using fluorescence microscopy and high-throughput flow cytometry. Plate count and live/dead staining experiments demonstrate the biocompatibility of the antibody-HNT hybrid with its target bacteria. The suggested HNT-based smart carrier constitutes a generic platform for targeted delivery that could be selectively tailored against any microorganism by facile antibody adjustment.

Enhanced antimicrobial activity and physicochemical stability of rapid pyro-fabricated silver-kaolinite nanocomposite

The present research aims to enhance the antimicrobial activity of kaolinite surfaces by a one-step cost-effective and energy-efficient dry thermal reaction, producing an antibacterial and antifungal silver-kaolinite (Ag-Kao) nanocomposite agent. Pharmaceutical grade kaolin powder samples, with variable kaolinite structural order-disorder degree, were homogeneously mixed with silver nitrate in a proportion 1:4 AgNO₃:kaolin (w/w) and sintered at 400 °C for 30 min. The composition, microstructure, microtexture and surface characteristics of the pyro-fabricated nanocomposites were characterized by XRD/XRF diffractometry, differential scanning calorimetry DSC, FT-IR spectroscopy, TEM/EDX, zeta potential (mV) measured within the 2-12 pH range, and BET method. Physicochemical stability was evaluated by silver dissociation testing under close-neutral and acidic conditions with Ag content assay using ICP-OES. The resulting Ag-Kao nanocomposites exhibited bulk silver contents ranging from 9.29% to 13.32% with high physicochemical stability in both neutral and acidic mediums (Ag dissociation rate <0.5% in 5 days). Ag nanocrystals exhibited particle sizes ranging from 5 to 30 nm, which were embedded and reinforced within the kaolinite matrix. The sizes of the Ag nanocrystals and their distribution patterns on the edges and faces of kaolinite platelets were controlled by the structural order-disorder degree. Highly ordered kaolinites (Hinckley Index, HI > 1) produced platelet edge-clustered silver nanocrystals due to the abundance of the dangling hydroxyls on platelet edges, while the highly disordered kaolinite (HI < 1) provided homogeneous platelet basal-doped silver nanocrystals due to the presence of some residual charges by exposed basal hydroxyl groups with interplatelet silver diffusivity. At pH 2, the magnitude of the positive surface charge was influenced by the silver nanocrystal size. Nanocomposites with the smallest silver nanocrystals (10-5 nm) exhibited the highest positive zeta potential (+15.2 mV to +17.0 mV), while those with larger silver nanocrystals (up to 30 nm) indicated lower positive zeta potential values (+9.5 mV to +3.6 mV). Under the same testing conditions using the Mueller-Hinton broth microdilution method, the raw kaolin samples did not show any significant antimicrobial activity, while all the pyro-fabricated Ag-Kao nanocomposite samples showed potent antibacterial and antifungal activity at low doses (MIC range 0.1-0.0125 mg/mL). Therefore, modulation of the effective electrostatic surface charge of the kaolinite platelets, via thermal doping of silver within their basal planes and edges, was found to be strongly dependent on the pH as well as the size and microtexture of the silver nanocrystals (mainly controlled by the order-disorder degree HI). The resulting modified nanostructure, with physicochemical stability and the efficient surface properties of the designed pyro-fabricated nanocomposite, led to an enhanced synergistic biophysical antimicrobial activity.

Traditional knowledge and practice of the Triassic variegated clay from Silesia (Krasiejów), Poland, in human medicine

BACKGROUND

Krasiejów clay (in German: Krascheow) became famous following the discovery of numerous fossilised bones of Upper Triassic amphibians and reptiles, which have been extracted from clay deposits since the 1980s. These organic remnants remained in Krasiejów clay due to the large amount of slime deposits and the optimal concentration of basal mineral salts. The main aims of the paper are to determine the historical evolution of the use of clay in Silesia for therapeutic purposes and to provide a summary of the historical uses of Krasiejów clay as a medical treatment, based on the knowledge of the local population.

METHODS

The mode of utilisation of Triassic variegated claystone treatment from Krasiejów was surveyed based on oral communication with local people. This information was collected over the last 35 years (1982-2017) by interviewing those who used clay as a traditional remedy, especially the eldest residents. Each resident was interviewed several times regarding the healing properties of Krasiejów clay, including the causes and symptoms of the ailments treated, mode of clay preparation, application methods, and dosage through semistructured interviews.

RESULTS

Clay from Krasiejów was used in medicine after proper preparation. The clay underwent a complicated preparation process before the use in wraps, compresses, poultices, and baths as a skin peeling agent and even as a potion to be drunk. All recorded applications, diseases, and ailments to which it were applied are described here in detail, divided into treatments with warm, and cold clay.

CONCLUSIONS

Krasiejów variegated claystone had different benefits depending on the form in which it was used; different diseases were treated with warm and cold clay. According to informants, many of these diseases have been successfully treated, in particular eczema of various origins, purulent ulcers on the skin, and following internal use, digestive ailments. According to informants, in cases where the disease could not be cured, for instance, psoriasis, a significant improvement in the condition of the skin was visible in a short period of time. Clay from Krasiejów should be subjected to more detailed physicochemical analyses to determine its exact chemical composition and healing properties.

A New Look at the Purported Health Benefits of Commercial and Natural Clays

Clays attributed to have medicinal properties have been used since prehistoric times and are still used today as complementary medicines, which has given rise to unregulated “bioceutical” clays to treat skin conditions. Recently, clays with antibacterial characteristics have been proposed as alternatives to antibiotics, potentially overcoming modern day antibiotic resistance. Clays with suggested antibacterial properties were examined to establish their effects on common wound-infecting bacteria. Geochemical, microscopical, and toxicological characterization of clay particulates, their suspensions and filtered leachates was performed on THP-1 and HaCaT cell lines. Cytoskeletal toxicity, cell proliferation/viability (MTT assays), and migration (scratch wounds) were further evaluated. Clays were assayed for antibacterial efficacy using minimum inhibitory concentration assays. All clays possessed a mineral content with antibacterial potential; however, clay leachates contained insufficient ions to have any antibacterial effects. All clay leachates displayed toxicity towards THP-1 monocytes, while clay suspensions showed less toxicity, suggesting immunogenicity. Reduced clay cytotoxicity on HaCaTs was shown, as many leachates stimulated wound-healing responses. The “Green” clay exhibited antibacterial effects and only in suspension, which was lost upon neutralization. pH and its interaction with clay particle surface charge is more significant than previously understood to emphasize dangers of unregulated marketing and unsubstantiated bioceutical claims.

Elimination of total coliforms and Escherichia coli from water by means of filtration with natural clays and silica sand in developing countries

This research presents the results of a pilot system used for water treatment to be supplied to single-family or small housing nucleus at rural sector. The pilot system is constituted by an up-flow aerated filter with ceramic carrier, followed by a second down-flow filter of silica sand. The pilot plant was installed in a rural sector of the province of Loja, Ecuador, with the main purpose of monitoring the reduction in bacteria in the water for human consumption. Two natural clays from the area were tested. They were transformed into sphere-type ceramics, and then, they were placed in the pilot filters. These both natural clays are inorganic materials with high content of aluminosilicate clay minerals with favourable characteristics to achieve greater efficiency for the reduction in bacteria. The acclimatization time of 60 days allowed to achieve optimum treatment efficiency performance until 90 days of operation. The physicochemical parameters, namely temperature, pH, dissolved oxygen and total dissolved solids, were monitored throughout the experiments. Regarding microbiological parameters, up to 99% of total coliforms removal was reached for the clay called CF-CC and 79% for the other, called CF-CV. In addition, 100% of total coliforms and Escherichia Coli removal was reached for both clay systems. Social and economic viability of the proposed treatment is also analysed in the manuscript.

Halloysite nanotubes - the nano-bio interface

The numerous biological applications of nanoparticles in general and nano-clays in particular are rooted in understanding and harnessing their dynamic nano-bio interface. Among clays, the intrinsically-mesoporous halloysite nanotubes (HNTs) have emerged in recent years as promising nanomaterials. The diverse interactions of these nanotubes with living cells, encompassing electrostatic, van der Waals, and ion exchange, along with cellular response, are crucial in determining the behaviour of HNTs in biological systems. Thus, rational engineering of the nanotube properties allows for vast applications ranging from bacteria encapsulation for bioremediation, through algae flocculation for aquaculture, to intracellular drug delivery. This review summarizes the many aspects of the nano-bio interface of HNTs with different cell types (bacteria, algae and fungi, and mammalian cells), highlighting biocompatibility/bio-adverse properties, interaction mechanisms, and the latest cutting-edge technologies.

Bacteriostatic and bactericidal clays: an overview

This article aims to draw an overview on the actual knowledge on bacteriostatic and bactericidal natural clays. Particular emphasis is given to the role of clay itself, the action of reduced metals located either in the structure of clay minerals or external to them as constituents of associate minerals, and the definition of the mechanisms of action based on the achievements found in all available studies being carried out so far. The term bactericidal is herein used when a clay or a clay mineral kill the bacteria, whereas the term bacteriostatic is used when those minerals stop bacteria growth and replication. The second part of this article deals with experimental studies on bactericidal natural clay, experience and perspective for the preparation of bactericidal natural clays, interesting on the authors perspective and experience for the preparation of pathogens safe both therapeutic and cosmetic natural mud/natural peloid, and better yet of both therapeutic 87oooand cosmetic peloid itself and designed and engineered peloid. The authors also show how to convert non-antimicrobial clay into antimicrobial one, opening the way in the field of pelotherapy to the preparation of sanitary safe peloids addressed, for instance, to the treatment of rheumatic disabilities, as well as to the preparation of antimicrobial peloids and, in particular, of dermatological ointments, all able to fight infectious skin disorders.

Broad-Spectrum Antimicrobial and Antibiofilm Activity of a Natural Clay Mineral from British Columbia, Canada

Worldwide increases in antibiotic resistance and the dearth of new antibiotics have created a global crisis in the treatment of infectious diseases. These concerns highlight the pressing need for novel antimicrobial agents. Natural clay minerals have a long history of therapeutic and biomedical applications and have lately received specific attention for their potent antimicrobial properties. In particular, Kisameet clay (KC) has strong antibacterial activity against a variety of multidrug-resistant (MDR) bacterial pathogens in vitro Here, we have extended the known spectrum of activity of KC by demonstrating its efficacy against two major fungal pathogens, Candida albicans and Cryptococcus neoformans In addition, KC also exhibits potent activity against the opportunistic bacterial pathogen Mycobacterium marinum, a model organism for M. ulcerans infection. Moreover, aqueous KC leachates (KC-L) exhibited broad-spectrum antibacterial activity, eradicated Gram-negative and Gram-positive biofilms, and prevented their formation. The mechanism(s) underlying KC antibacterial activity appears to be complex. Adjusting KC-L to neutral pH rendered it inactive, indicating a contribution of pH, although low pH alone was insufficient for its antibacterial activity. Treatment of KC minerals with cation-chelating agents such as EDTA, 2,2'-bipyridyl, and deferoxamine reduced the antibacterial activity, while supplementation of KC-L with these chelating agents eliminated the inhibitory activity. Together, the data suggest a positive role for divalent and trivalent cations, including iron and aluminum, in bacterial inhibition by KC. Collectively, these studies demonstrate the range of KC bioactivity and provide a better understanding of the mechanism underlying its antibacterial effects.IMPORTANCE The escalating emergence of multidrug-resistant (MDR) bacteria, together with the paucity of novel antimicrobial agents in antibiotic development, is recognized as a worldwide public health crisis. Kisameet clay (KC), found in British Columbia (BC), Canada, is a clay mineral with a long history of therapeutic applications among people of the First Nations. We previously reported the antibacterial activity of KC against a group of MDR clinical pathogens. Here, we demonstrate its activity against two major human-pathogenic fungal species, as well as against bacterial biofilms, which underlie many recalcitrant bacterial infections. In these studies, we also identified several geochemical characteristics of KC, such as metal ions and low pH, which are involved in its antibacterial activity. These findings provide a better understanding of the components of KC antibacterial activity and a basis for developing defined preparations of this clay mineral for therapeutic applications.

Strong mineralogic control of soil organic matter composition in response to nutrient addition across diverse grassland sites

Soil organic matter (SOM) dynamics are central to soil biogeochemistry and fertility. The retention of SOM is governed initially by interactions with minerals, which mediate the sorption of chemically diverse organic matter (OM) molecules via distinct surface areas and chemical functional group availabilities. Unifying principles of mineral-OM interactions remain elusive because of the multi-layered nature of biochemical-mineral interactions that contribute to soil aggregate formation and the heterogeneous nature of soils among ecosystems. This study sought to understand how soil mineralogy as well as nitrogen (N) enrichment regulate OM composition in grassland soils. Using a multi-site grassland experiment, we demonstrate that the composition of mineral-associated OM depended on the clay content and specific mineral composition in soils across the sites. With increasing abundance of ferrihydrite (Fh) across six different grassland locations, OM in the hydrophobic zone became more enriched in lipid- and protein-like compounds, whereas the kinetic zone OM became more enriched in lignin-like molecules. These relationships suggest that the persistence of various classes of OM in soils may depend on soil iron mineralogy and provide experimental evidence to support conceptual models of zonal mineral-OM associations. Experimental N addition disrupted the accumulation of protein-like molecules in the hydrophobic zone and the positive correlation of lignin-like molecules in the kinetic zone with Fh content, compared to unfertilized soils. These data suggest that mineralogy and clay content together influence the chemical composition not only of mineral-associated OM, but also of soluble compounds within the soil matrix. If these relationships are prevalent over larger spatial and temporal scales, they provide a foundation for understanding SOM cycling and persistence under a variety of environmental contexts.

Correlation between Elemental Composition/Mobility and Skin Cell Proliferation of Fibrous Nanoclay/Spring Water Hydrogels

Inorganic hydrogels formulated with spring waters and clay minerals are used to treat musculoskeletal disorders and skin affections. Their underlying mechanism of action for skin disorders is not clear, although it is usually ascribed to the chemical composition of the formulation. The aim of this study was to assess the composition and in vitro release of elements with potential wound healing effects from hydrogels prepared with two nanoclays and natural spring water. In vitro Franz cell studies were used and the element concentration was measured by inductively coupled plasma techniques. Biocompatibility studies were used to evaluate the potential toxicity of the formulation against fibroblasts. The studied hydrogels released elements with known therapeutic interest in wound healing. The released ratios of some elements, such as Mg:Ca or Zn:Ca, played a significant role in the final therapeutic activity of the formulation. In particular, the proliferative activity of fibroblasts was ascribed to the release of Mn and the Zn:Ca ratio. Moreover, the importance of formulative studies is highlighted, since it is the optimal combination of the correct ingredients that makes a formulation effective.

Lake Zeiļu Clay Application Induced Changes in Human Skin Hydration, Elasticity, Transepidermal Water Loss and PH in Healthy Individuals

Clay has a great biomedical application potential, however there are just a few instrumental studies and the impact of lake clay on the skin has not yet been studied. The DermaLab skin analysis system (Cortex Technology) was used for hydration, elasticity, transepidermal water loss (TEWL) and pH measurements after lake clay facial applications. Research included short-term tests (measurements 20 and 60 min after clay application) and long-term tests (application every 4th day for 3 weeks with measurements 20–24 h post-application). Control measurements and application tests to exclude contact allergy were made beforehand. No volunteer (n = 30) had positive allergic reaction. The matched-pairs design was applied: the right and left parts of forehead were used for the test and control groups. The Wilcoxon signed-rank test (significance level p = 0.001) was applied for statistical analysis. There were statistically significant pH changes demonstrated during the short-term measurements. The long-term measurements provided data that clay significantly improves skin hydration and elasticity.

Incorporation of quaternary ammonium chitooligosaccharides on ZnO/palygorskite nanocomposites for enhancing antibacterial activities

Quaternary ammonium chitooligosaccharides (QACOS) was incorporated onto the ZnO/palygorskite (ZnO/PAL) nanocomposite by a simple electrostatic self-assembly process to produce a new organic-inorganic nanocomposite (QACOS/ZnO/PAL) with excellent antibacterial activity. After loading QACOS, the Zeta potential of ZnO/PAL was changed from -26.7 to +30.3 mV, which facilitates to improve the targeting behavior of ZnO/PAL towards bacteria and its contact with bacteria, resulting in a significant improvement of antibacterial capability. The MIC values of QACOS/ZnO/PAL for inhibiting bacteria (0.5 mg/mL for E. coli and 1 mg/L for S. aureus) were superior to ZnO/PAL and QACOS, demonstrated an expected synergistic antibacterial effect between QACOS and ZnO/PAL. The improved contact and interface interaction between QACOS/ZnO/PAL and bacteria makes it easier to destroy the structural integrity of bacteria. As a whole, the incorporation of polysaccharide as regulators of surface charge opens up a new way to further enhance the antibacterial activity of inorganic antibacterial materials.

The Social and Material Life of Antimicrobial Clay: Exploring Antimicrobial Resistance, Medicines' Materiality, and Medicines Optimization

While sociologists have made significant theoretical contributions to the antimicrobial resistance (AMR) debate, little attention has been given to the antimicrobial products themselves. Here we advocate a significant new direction which centers on the social and material life of antimicrobials, specifically on what they are made from and how this affects their use. This focus is timely because, in the context of declining efficacy of biomedical antibiotics, diverse materials are increasingly taking center stage in research and drug discovery as potential agents for new antimicrobial treatments. Of particular significance are natural antimicrobials, such as plants, honey and clay, whose antimicrobial potential is well-documented and which are increasingly moving into mainstream antimicrobial research. Alongside this biomedical focus, we suggest that the social and material lives of these antimicrobial materials require attention to (i) highlight the ways they have been, and continue to be, used in diverse cultures globally, (ii) explore ways we might theorize these materials within wider AMR debates, and (iii) examine the impact of antimicrobials' materiality on their use by patients. This article takes the example of clay, whose antimicrobial properties are well-established and which has been used to treat wounds and gastrointestinal problems for millennia. We first locate clay as an exemplar of a wider shift toward natural products drug discovery in pharmaceutical science and antimicrobial research. We then offer a number of theoretical "ways in" for sociologists to begin making sense of clay as it comes under the western biomedical gaze. We map these conceptual lenses on to clay's physical and symbolic mobility from its use in the global south into western biomedical research and commercialization. We particularly concentrate on post-colonial theory as a means to understand clay's movement from global south to north; laboratory studies to examine its symbolic transformation to a black-boxed antimicrobial artifact; and valuation practices as a lens to capture its movement from the margins to the mainstream. We finish by reflecting on the importance of materiality in addressing optimal use of medicines and by advocating an interdisciplinary approach to AMR which positions sociology as a key contributor to AMR solutions.

Mechanisms of Enhanced Antibacterial Activity by Reduced Chitosan-Intercalated Nontronite

Previous studies have documented the antibacterial activity of certain iron-containing clays. However, the repulsion between negatively charged bacteria and the clay surface makes this process inefficient. The objective of this study is to improve the bactericidal efficiency of clays by reversing their surface charge from negative to positive. To achieve this objective, positively charged chitosan, a nontoxic and biodegradable polymer, was intercalated into nontronite NAu-2. Chitosan-intercalated NAu-2 (C-NAu-2) was chemically reduced to obtain reduced C-NAu-2 (rC-NAu-2). Relative to reduced nontronite (rNAu-2), the antibacterial activity of rC-NAu-2 is higher and more persistent over a pH range of 6-8. The close spatial association between positively charged rC-NAu-2 and negatively charged bacteria increases the chances of cell membrane attack by extracellular ROS, the influx of soluble Fe²⁺ into the bacterial cell, and the yield of intracellular ROS. All these factors contribute to the enhanced antibacterial activity of rC-NAu-2. In contrast to rNAu-2 treated E. coli cells, where membrane damage and intracellular ROS/Fe accumulation are restricted to the polar regions, the close bacteria-clay association in rC-NAu-2 results in nonselective membrane damage and more uniform intracellular ROS/Fe distribution across whole bacterial cells. These results advance the antibacterial model by highlighting the importance of bacteria-clay interactions to the antibacterial activity of Fe-bearing clays.

Natural Inorganic Ingredients in Wound Healing

Background:

One of the major clinical challenges is to achieve a rapid and efficient treatment of complex chronic wounds. Nowadays, most wound dressings currently available are unable to find a solution the challenges of resistance to bacterial infection, protein adsorption and increased levels of exudates. Natural inorganic ingredients (clay minerals, metal cations, zeolites, etc) could be the key to solve the problem satisfactorily. Some of these materials have shown biocompatibility and ability to enhance cell adhesion, proliferation and cellular differentiation and uptake. Besides, some natural inorganic ingredients effectively retain drugs, allowing the design of drug delivery matrices.

Objective:

possibilities of natural inorganic ingredients in wound healing treatments have been reviewed, the following sections have been included: 1. Introduction 2. Functions of Inorganic Ingredients in wound healing 2.1. Antimicrobial effects 2.2. Hemostatic effects 3. Clay minerals for wound healing 3.1. Clay minerals 3.2. Clay mineral semisolid formulations 3.3. Clay/polymer composites and nanocomposites 3.4. Clay minerals in wound dressings 4. Other inorganic materials for wound healing 4.1. Zeolites 4.2. Silica and other silicates 4.3. Other minerals 4.4. Transition metals 5. Conclusion

Conclusion:

inorganic ingredients possess useful features in the development of chronic wounds advanced treatments. They improve physical (mechanical resistance and water vapor transmission), chemical (release of drugs, hemostasis and/or adsorption of exudates and moisture) and biological (antimicrobial effects and improvement of healing) properties of wound dressings. In summary, inorganic ingredients have proved to be a promising and easily accessible products in the treatment of wounds and, more importantly, chronic wounds.

Mud therapy and rehabilitation - scientific relevance in the last six years (2015 – 2020) Systematic literature review and meta-analysis based on the PRISMA paradigm

Abstract Background. Balneotherapy is a stimulation - adaptation treatment method applied in the forms of bathing, drinking, and inhalation cures performed with natural therapeutic factors, a method which is acting in three main ways: thermally, mechanically, and chemically. Mud or peloids are natural therapeutic factors formed by natural processes under the influence of biological and geological phenomena, which in a finely dissolved state and mixed with water (mud) are used in medical practice in the form of baths or local procedures. Objective. This systematic review aims to rigorously select related articles and identify within their content, the main possible uses of therapeutic mud and physiological mechanisms, to see the main region of scientific interest for pelotherapy, and to discuss the value of mud therapy in rehabilitation medicine. Methods. The working method is based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. We searched for open-access articles published in English, between January 2015 and December 2020, from the following databases: Cochrane, Elsevier, NCBI/PubMed, NCBI/PMC, PEDro, and ISI Web of Knowledge/Science (the latter was also used to identify ISI indexed articles). The contextually searched syntax used was ”Pelotherapy/Peloidotherapy/Mud-therapy/ /Fango-therapy AND Rehabilitation”. The selected articles were analyzed in detail regarding pathologies addressed by mud therapy and country scientific relevance for this therapeutic method. The meta-analysis proceeded was designated to estimate the prevalence of various pathologies in the use of mud therapy. Results. Our search identified, first, 394 articles. Based on the successive filtering stages and, respectively, on the classification criteria of the Physiotherapy Evidence Database (PEDro), we finally identified/retained and analyzed 68 articles. Although, in principle, a rigorous method – and we have followed the PRISMA type paradigm – there still might be some missing works of our related article selection. On the other hand, to augment/ consolidate our documentation base, we have used also 40 papers freely found in the literature, and even – aiming, too, at an as exhaustive knowledge underpinning as possible – derogatively, we have also considered some articles which, probably being very new, couldn't yet have reached the PEDro threshold score we have settled. Conclusions. This paper overviews the current state-of-the-art knowledge in the approach of peloidotherapy in rehabilitation, with a focal point on the therapeutic properties of peloids. Keywords: mud-therapy, pelotherapy, peloidotherapy, fango therapy, rehabilitation, balneotherapy, natural therapeutic factors,

Elevated Arsenic and Lead Concentrations in Natural Healing Clay Applied Topically as a Treatment for Ulcerative Dermatitis in Mice

Ulcerative dermatitis in laboratory mice remains an ongoing clinical problem and animal welfare issue. Many products have been used to treat dermatitis in mice, with varying success. Recently, the topical administration of healing clays, such as bentonite and green clays, has been explored as a viable, natural treatment. We found high concentrations of arsenic and lead in experimental samples of therapeutic clay. Given the known toxic effects of these environmental heavy metals, we sought to determine whether the topical administration of a clay product containing bioavailable arsenic and lead exerted a biologic effect in mice that potentially could introduce unwanted research variability. Two cohorts of 20 singly housed, shaved, dermatitis free, adult male CD1 mice were dosed daily for 2 wk by topical application of saline or green clay paste. Samples of liver, kidney and whole blood were collected and analyzed for total arsenic and lead concentrations. Hepatic and renal concentrations of arsenic were not different between treated and control mice in either cohort; however, hepatic and renal concentrations of lead were elevated in clay treated mice compared to controls in both cohorts. In addition, in both cohorts, the activity of δ-aminolevulinate acid dehydratase, an enzyme involved with heme biosynthesis and a marker of lead toxicity, did not differ significantly between the clay-treated mice and controls. We have demonstrated that these clay products contain high concentrations of arsenic and lead and that topical application can result in the accumulation of lead in the liver and kidneys; however, these concentrations did not result in measurable biologic effects. These products should be used with caution, especially in studies of lead toxicity, heme biosynthesis, and renal α2 microglobulin function.

Temporal effects of repeated application of biogas slurry on soil antibiotic resistance genes and their potential bacterial hosts

Biogas slurry, a liquid end product of animal manure fermentation, is widely used as fertilizer in crop fields. Land application may introduce antibiotics and related resistance genes from livestock production into agricultural soil. Nevertheless, changes in antimicrobial resistance in soil where biogas slurry has been repeatedly applied are not fully understood. In the present study, 13 veterinary antibiotics were analyzed in soils that were repeatedly sprayed with biogas slurry, and simultaneously, temporal changes in antibiotic resistance genes (ARGs) and bacterial community composition were investigated using a real-time quantitative PCR assay and MiSeq sequencing. Long-term repeated application of biogas slurry did not result in excessive accumulation of antibiotic residuals in the soil but increased the abundance of ARGs and facilitated ARG transfer among potential hosts. Although the quantitative PCR assay showed a decreasing trend for the relative abundance of ARGs over time, a relevance network analysis revealed highly complex bacteria-ARG co-occurrence after long-term application, which implied that repeated application might intensify horizontal gene transfer (HGT) of ARGs among different bacterial hosts in soil. The increased relative abundance of the intl1 gene supported the shift in ARG-bacteria co-occurrence. Furthermore, ordination analysis showed that the distributions of antibiotic resistance bacteria (ARB) and ARGs were closely related to application duration than to the influence of antibiotic residuals in the biogas slurry-treated soil environment. Additionally, natural level of ARG abundance in untreated soils indirectly suggested the presence/absence of antibiotics was not a key determinant causing the spread of antimicrobial resistance. This study provides improved insight into the effects of long-term repeated application of biogas slurry on the shift in ARG abundances and bacteria-ARG co-occurrence in soils, highlighting the need to focus on the influence of changed soil environment on the ARG transfer.

The response of periodontal cells to kaolinite

OBJECTIVES

The impact of kaolinite on human periodontal cells is yet unknown. The aim of the study was to assess the response of human periodontal cells to kaolinite.

METHODS

Human periodontal cells were treated with kaolinite at reducing concentrations from 30 to 0.0015 mg/mL and with conditioned medium, which was depleted of kaolinite. Cell viability was evaluated with a resazurin-based toxicity assay, Live-Dead staining, and MTT assay and staining. The pro-angiogenic factors vascular endothelial growth factor (VEGF) and interleukin (IL)-6 and IL-8 were quantified via ELISA in periodontal fibroblasts. L-929, a standard cell-line used for cytotoxicity studies, served as control cell line. Composition of kaolinite was verified using energy-dispersive X-ray spectroscopy.

RESULTS

Kaolinite in suspension but not in conditioned medium impaired cell viability dose-dependently. VEGF, IL-6, and IL-8 production was not substantially modulated by kaolinite or the conditioned medium in periodontal cells.

CONCLUSION

Overall, kaolinite can decrease cell viability dose-dependently while conditioned medium showed no toxic effect. No pronounced impact of kaolinite on VEGF, IL-6, and IL-8 production was observed. This study provided first insights into the impact of kaolinite on human periodontal cells thereby inferring to the basis for the evaluation of kaolinite as a carrier in regenerative dentistry.

CLINICAL RELEVANCE

Kaolinite, a clay mineral, is successfully used in medicine due to its favorable properties. Also, applications in conservative dentistry are described. However, the response of oral cells to kaolinite is still unclear. Here, we assessed the impact of kaolinite on human periodontal cells.

Impact of tetracycline-clay interactions on bacterial growth

Antibiotics are extremely effective against bacterial infections due to their selective toxicity for bacteria rather than the host. Extensive use and misuse of antibiotics resulted in significant increases in antibiotic levels in aquatic and soil environments. Bacteria exposed to antibiotics with low concentrations may develop antibiotic resistance. In this study a swelling 2:1 clay mineral montmorillonite (MMT) and a non-swelling 1:1 clay mineral kaolinite were premixed with tetracycline (TC) of varying concentrations. The gram-negative bacteria Escherichia coli (E. coli) and Salmonella enterica (S. enterica) of both TC sensitive and TC resistant strains were tested for their growth in the presence TC-loaded clay minerals of different amounts and under different physico-chemical conditions. The antimicrobial activity of TC was significantly decreased in the presence of MMT. In the absence of MMT, no bacteria growth was found at a TC concentration 0.25mg/mL and above. On the contrast, in the presence of MMT, 50% growth was still found for a TC resistant E. coli at a TC concentration of 5mg/g. The influence of kaolinite was to a lesser degree. These results suggest that antimicrobial agents present in clayey soils could be responsible for possible mutation of bacteria of high antibiotic resistance.

Antimicrobial Applications of Clay Nanotube-Based Composites

Halloysite nanotubes with different outer surface/inner lumen chemistry (SiO₂/Al₂O₃) are natural objects with a 50 nm diameter hollow cylindrical structure, which are able to carry functional compounds both inside and outside. They are promising for biological applications where their drug loading capacity combined with a low toxicity ensures the safe interaction of these nanomaterials with living cells. In this paper, the antimicrobial properties of the clay nanotube-based composites are reviewed, including applications in microbe-resistant biocidal textile, paints, filters, and medical formulations (wound dressings, drug delivery systems, antiseptic sprays, and tissue engineering scaffolds). Though halloysite-based antimicrobial materials have been widely investigated, their application in medicine needs clinical studies. This review suggests the scalable antimicrobial nano/micro composites based on natural tubule clays and outlines research and development perspectives in the field.