Dynamic Myofibrillar Remodeling in Live Cardiomyocytes under Static Stretch

Differential sensitivity to longitudinal and transverse stretch mediates transcriptional responses in mouse neonatal ventricular myocytes

To identify how cardiomyocyte mechanosensitive signaling pathways are regulated by anisotropic stretch, micropatterned mouse neonatal cardiomyocytes were stretched primarily longitudinally or transversely to the myofiber axis. Four hours of static, longitudinal stretch induced differential expression of 557 genes, compared with 30 induced by transverse stretch, measured using RNA-seq. A logic-based ordinary differential equation model of the cardiac myocyte mechanosignaling network, extended to include the transcriptional regulation and expression of 784 genes, correctly predicted measured expression changes due to anisotropic stretch with 69% accuracy. The model also predicted published transcriptional responses to mechanical load in vitro or in vivo with 63-91% accuracy. The observed differences between transverse and longitudinal stretch responses were not explained by differential activation of specific pathways but rather by an approximately twofold greater sensitivity to longitudinal stretch than transverse stretch. In vitro experiments confirmed model predictions that stretch-induced gene expression is more sensitive to angiotensin II and endothelin-1, via RhoA and MAP kinases, than to the three membrane ion channels upstream of calcium signaling in the network. Quantitative cardiomyocyte gene expression differs substantially with the axis of maximum principal stretch relative to the myofilament axis, but this difference is due primarily to differences in stretch sensitivity rather than to selective activation of mechanosignaling pathways.NEW & NOTEWORTHY Anisotropic stretch applied to micropatterned neonatal mouse ventricular myocytes induced markedly greater acute transcriptional responses when the major axis of stretch was parallel to the myofilament axis than when it was transverse. Analysis with a novel quantitative network model of mechanoregulated cardiomyocyte gene expression suggests that this difference is explained by higher cell sensitivity to longitudinal loading than transverse loading than by the activation of differential signaling pathways.

A homogenized constrained mixture model of cardiac growth and remodeling: analyzing mechanobiological stability and reversal

Cardiac growth and remodeling (G&R) patterns change ventricular size, shape, and function both globally and locally. Biomechanical, neurohormonal, and genetic stimuli drive these patterns through changes in myocyte dimension and fibrosis. We propose a novel microstructure-motivated model that predicts organ-scale G&R in the heart based on the homogenized constrained mixture theory. Previous models, based on the kinematic growth theory, reproduced consequences of G&R in bulk myocardial tissue by prescribing the direction and extent of growth but neglected underlying cellular mechanisms. In our model, the direction and extent of G&R emerge naturally from intra- and extracellular turnover processes in myocardial tissue constituents and their preferred homeostatic stretch state. We additionally propose a method to obtain a mechanobiologically equilibrated reference configuration. We test our model on an idealized 3D left ventricular geometry and demonstrate that our model aims to maintain tensional homeostasis in hypertension conditions. In a stability map, we identify regions of stable and unstable G&R from an identical parameter set with varying systolic pressures and growth factors. Furthermore, we show the extent of G&R reversal after returning the systolic pressure to baseline following stage 1 and 2 hypertension. A realistic model of organ-scale cardiac G&R has the potential to identify patients at risk of heart failure, enable personalized cardiac therapies, and facilitate the optimal design of medical devices.

Mechanisms of adaptive hypertrophic cardiac remodeling in a large animal model of premature ventricular contraction-induced cardiomyopathy

Frequent premature ventricular contractions (PVCs) promoted eccentric cardiac hypertrophy and reduced ejection fraction (EF) in a large animal model of PVC-induced cardiomyopathy (PVC-CM), but the molecular mechanisms and markers of this hypertrophic remodeling remain unexplored. Healthy mongrel canines were implanted with pacemakers to deliver bigeminal PVCs (50% burden with 200-220 ms coupling interval). After 12 weeks, left ventricular (LV) free wall samples were studied from PVC-CM and Sham groups. In addition to reduced LV ejection fraction (LVEF), the PVC-CM group showed larger cardiac myocytes without evident ultrastructural alterations compared to the Sham group. Biochemical markers of pathological hypertrophy, such as store-operated Ca2+ entry, calcineurin/NFAT pathway, β-myosin heavy chain, and skeletal type α-actin were unaltered in the PVC-CM group. In contrast, pro-hypertrophic and antiapoptotic pathways including ERK1/2 and AKT/mTOR were activated and/or overexpressed in the PVC-CM group, which appeared counterbalanced by an overexpression of protein phosphatase 1 and a borderline elevation of the anti-hypertrophic factor atrial natriuretic peptide. Moreover, the potent angiogenic and pro-hypertrophic factor VEGF-A and its receptor VEGFR2 were significantly elevated in the PVC-CM group. In conclusion, a molecular program is in place to keep this structural remodeling associated with frequent PVCs as an adaptive pathological hypertrophy.

Cardiomyocyte external mechanical unloading activates modifications of α-actinin differently from sarcomere-originated unloading

Loss of myocardial mass in a neonatal rat cardiomyocyte culture is studied to determine whether there is a distinguishable cellular response based on the origin of mechano-signals. The approach herein compares the sarcomeric assembly and disassembly processes in heart cells by imposing mechano-signals at the interface with the extracellular matrix (extrinsic) and at the level of the myofilaments (intrinsic). Experiments compared the effects of imposed internal (inside/out) and external (outside/in) loading and unloading on modifications in neonatal rat cardiomyocytes. Unloading of the cellular substrate by myosin inhibition (1 μm mavacamten), or cessation of cyclic strain (1 Hz, 10% strain) after preconditioning, led to significant disassembly of sarcomeric α-actinin by 6 h. In myosin inhibition, this was accompanied by redistribution of intracellular poly-ubiquitin K48 to the cellular periphery relative to the poly-ubiquitin K48 reservoir at the I-band. Moreover, loading and unloading of the cellular substrate led to a three-fold increase in post-translational modifications (PTMs) when compared to the myosin-specific activation or inhibition. Specifically, phosphorylation increased with loading while ubiquitination increased with unloading, which may involve extracellular signal-regulated kinase 1/2 and focal adhesion kinase activation. The identified PTMs, including ubiquitination, acetylation, and phosphorylation, are proposed to modify internal domains in α-actinin to increase its propensity to bind F-actin. These results demonstrate a link between mechanical feedback and sarcomere protein homeostasis via PTMs of α-actinin that exemplify how cardiomyocytes exhibit differential responses to the origin of force. The implications of sarcomere regulation governed by PTMs of α-actinin are discussed with respect to cardiac atrophy and heart failure.

Ascorbic acid induces MLC2v protein expression and promotes ventricular-like cardiomyocyte subtype in human induced pluripotent stem cells derived cardiomyocytes

Introduction: The potentially unlimited number of cardiomyocyte (CMs) derived from human induced pluripotent stem cells (hiPSCs) in vitro facilitates high throughput applications like cell transplantation for myocardial repair, disease modelling, and cardiotoxicity testing during drug development. Despite promising progress in these areas, a major disadvantage that limits the use of hiPSC derived CMs (hiPSC-CMs) is their immaturity. Methods: Three hiPSC lines (PCBC-hiPSC, DP3-hiPSCs, and MLC2v-mEGFP hiPSC) were differentiated into CMs (PCBC-CMs, DP3-CMs, and MLC2v-CMs, respectively) with or without retinoic acid (RA). hiPSC-CMs were either maintained up to day 30 of contraction (D30C), or D60C, or purified using lactate acid and used for experiments. Purified hiPSC-CMs were cultured in basal maturation medium (BMM) or BMM supplemented with ascorbic acid (AA) for 14 days. The AA treated and non-treated hiPSC-CMs were characterized for sarcomeric proteins (MLC2v, TNNI3, and MYH7), ion channel proteins (Kir2.1, Nav1.5, Cav1.2, SERCA2a, and RyR), mitochondrial membrane potential, metabolomics, and action potential. Bobcat339, a selective and potent inhibitor of DNA demethylation, was used to determine whether AA promoted hiPSC-CM maturation through modulating DNA demethylation. Results: AA significantly increased MLC2v expression in PCBC-CMs, DP3-CMs, MLC2v-CMs, and RA induced atrial-like PCBC-CMs. AA treatment significantly increased mitochondrial mass, membrane potential, and amino acid and fatty acid metabolism in PCBC-CMs. Patch clamp studies showed that AA treatment induced PCBC-CMs and DP3-CMs adaptation to a ventricular-like phenotype. Bobcat339 inhibited MLC2v protein expression in AA treated PCBC-CMs and DP3-CMs. DNA demethylation inhibition was also associated with reduced TET1 and TET2 protein expressions and reduced accumulation of the oxidative product, 5 hmC, in both PCBC-CMs and DP3-CMs, in the presence of AA. Conclusions: Ascorbic acid induced MLC2v protein expression and promoted ventricular-like CM subtype in hiPSC-CMs. The effect of AA on hiPSC-CM was attenuated with inhibition of TET1/TET2 mediated DNA demethylation.

Mechanisms of trastuzumab induced cardiotoxicity - is exercise a potential treatment?

The use of the adjuvant therapeutic antibody trastuzumab in breast cancer is associated with a range of cardiotoxic side effects despite successfully reducing the severity of outcomes cancer patients,. The most common cardiac effect, a reduction in left ventricular ejection fraction (LVEF), is a known precursor to heart failure and often requires interruption of chemotherapy to avoid endangering patients further. An understanding of trastuzumab's cardiac-specific interactions is therefore critical in devising new methods to not only avoid permanent cardiac damage, but also prolong treatment time, and therefore effectiveness, for breast cancer patients. Increasingly, the use of exercise as a treatment has been indicated across the field of cardio-oncology due to encouraging evidence that it can protect against LVEF reductions and heart failure. This review explores the mechanisms of trastuzumab-mediated cardiotoxicity, as well as the physiological effects of exercise on the heart, in order to assess the suitability of exercise intervention for breast cancer patients on trastuzumab antibody-therapy. We furthermore draw comparison to existing evidence for exercise intervention as a cardioprotective treatment in doxorubicin-induced cardiotoxicity. Although preclinical evidence seems to support exercise-based approaches also in trastuzumab-cardiotoxicity, current clinical evidence is too limited to confidently recommend it as a treatment, largely owing to issues of adherence. Future studies should therefore examine how the variety and duration of exercise can be adjusted to improve treatment effectiveness at a more personalised level.

Dynamic mechanobiology of cardiac cells and tissues: Current status and future perspective

Mechanical forces impact cardiac cells and tissues over their entire lifespan, from development to growth and eventually to pathophysiology. However, the mechanobiological pathways that drive cell and tissue responses to mechanical forces are only now beginning to be understood, due in part to the challenges in replicating the evolving dynamic microenvironments of cardiac cells and tissues in a laboratory setting. Although many in vitro cardiac models have been established to provide specific stiffness, topography, or viscoelasticity to cardiac cells and tissues via biomaterial scaffolds or external stimuli, technologies for presenting time-evolving mechanical microenvironments have only recently been developed. In this review, we summarize the range of in vitro platforms that have been used for cardiac mechanobiological studies. We provide a comprehensive review on phenotypic and molecular changes of cardiomyocytes in response to these environments, with a focus on how dynamic mechanical cues are transduced and deciphered. We conclude with our vision of how these findings will help to define the baseline of heart pathology and of how these in vitro systems will potentially serve to improve the development of therapies for heart diseases.

Sarcomere maturation: function acquisition, molecular mechanism, and interplay with other organelles

During postnatal cardiac development, cardiomyocytes mature and turn into adult ones. Hence, all cellular properties, including morphology, structure, physiology and metabolism, are changed. One of the most important aspects is the contractile apparatus, of which the minimum unit is known as a sarcomere. Sarcomere maturation is evident by enhanced sarcomere alignment, ultrastructural organization and myofibrillar isoform switching. Any maturation process failure may result in cardiomyopathy. Sarcomere function is intricately related to other organelles, and the growing evidence suggests reciprocal regulation of sarcomere and mitochondria on their maturation. Herein, we summarize the molecular mechanism that regulates sarcomere maturation and the interplay between sarcomere and other organelles in cardiomyocyte maturation.

This article is part of the theme issue ‘The cardiomyocyte: new revelations on the interplay between architecture and function in growth, health, and disease’.

Current methods for fabricating 3D cardiac engineered constructs

3D cardiac engineered constructs have yielded not only the next generation of cardiac regenerative medicine but also have allowed for more accurate modeling of both healthy and diseased cardiac tissues. This is critical as current cardiac treatments are rudimentary and often default to eventual heart transplants. This review serves to highlight the various cell types found in cardiac tissues and how they correspond with current advanced fabrication methods for creating cardiac engineered constructs capable of shedding light on various pathologies and providing the therapeutic potential for damaged myocardium. In addition, insight is given toward the future direction of the field with an emphasis on the creation of specialized and personalized constructs that model the region-specific microtopography and function of native cardiac tissues.

Mimicking Native Heart Tissue Physiology and Pathology in Silk Fibroin Constructs through a Perfusion-Based Dynamic Mechanical Stimulation Microdevice

In vitro cardiomyocyte (CM) maturation is an imperative step to replicate native heart tissue-like structures as cardiac tissue grafts or as drug screening platforms. CMs are known to interpret biophysical cues such as stiffness, topography, external mechanical stimulation or dynamic perfusion load through mechanotransduction and change their behavior, organization, and maturation. In this regard, a silk-based cardiac tissue (CT) coupled with a dynamic perfusion-based mechanical stimulation platform (DMM) for achieving maturation and functionality in vitro is tried to be delivered. Silk fibroin (SF) is used to fabricate lamellar scaffolds to provide native tissue-like anisotropic architecture and is found to be nonimmunogenic and biocompatible allowing cardiomyocyte attachment and growth in vitro. Further, the scaffolds display excellent mechanical properties by their ability to undergo cyclic compressions without any deformation when places in the DMM. Gradient compression strains (5% to 20%), mimicking the native physiological and pathological conditions, are applied to the cardiomyocyte culture seeded on lamellar silk scaffolds in the DMM. A strain-dependent difference in cardiomyocyte maturation, gene expression, sarcomere elongation, and extracellular matrix formation is observed. These silk-based CTs matured in the DMM can open up several avenues toward the development of host-specific grafts and in vitro models for drug screening.

Cardiomyocyte Microtubules: Control of Mechanics, Transport, and Remodeling

Microtubules are essential cytoskeletal elements found in all eukaryotic cells. The structure and composition of microtubules regulate their function, and the dynamic remodeling of the network by posttranslational modifications and microtubule-associated proteins generates diverse populations of microtubules adapted for various contexts. In the cardiomyocyte, the microtubules must accommodate the unique challenges faced by a highly contractile, rigidly structured, and long-lasting cell. Through their canonical trafficking role and positioning of mRNA, proteins, and organelles, microtubules regulate essential cardiomyocyte functions such as electrical activity, calcium handling, protein translation, and growth. In a more specialized role, posttranslationally modified microtubules form load-bearing structures that regulate myocyte mechanics and mechanotransduction. Modified microtubules proliferate in cardiovascular diseases, creating stabilized resistive elements that impede cardiomyocyte contractility and contribute to contractile dysfunction. In this review, we highlight the most exciting new concepts emerging from recent studies into canonical and noncanonical roles of cardiomyocyte microtubules.

Thyroid hormone-dependent regulation of metabolism and heart regeneration

While adult zebrafish and newborn mice possess a robust capacity to regenerate their hearts, this ability is generally lost in adult mammals. The logic behind the diversity of cardiac regenerative capacity across the animal kingdom is not well understood. We have recently reported that animal metabolism is inversely correlated to the abundance of mononucleated diploid cardiomyocytes in the heart, which retain proliferative and regenerative potential. Thyroid hormones are classical regulators of animal metabolism, mitochondrial function, and thermogenesis, and a growing body of scientific evidence demonstrates that these hormonal regulators also have direct effects on cardiomyocyte proliferation and maturation. We propose that thyroid hormones dually control animal metabolism and cardiac regenerative potential through distinct mechanisms, which may represent an evolutionary tradeoff for the acquisition of endothermy and loss of heart regenerative capacity. In this review, we describe the effects of thyroid hormones on animal metabolism and cardiomyocyte regeneration and highlight recent reports linking the loss of mammalian cardiac regenerative capacity to metabolic shifts occurring after birth.

A rapid electromechanical model to predict reverse remodeling following cardiac resynchronization therapy

Cardiac resynchronization therapy (CRT) is an effective therapy for patients who suffer from heart failure and ventricular dyssynchrony such as left bundle branch block (LBBB). When it works, it reverses adverse left ventricular (LV) remodeling and the progression of heart failure. However, CRT response rate is currently as low as 50-65%. In theory, CRT outcome could be improved by allowing clinicians to tailor the therapy through patient-specific lead locations, timing, and/or pacing protocol. However, this also presents a dilemma: there are far too many possible strategies to test during the implantation surgery. Computational models could address this dilemma by predicting remodeling outcomes for each patient before the surgery takes place. Therefore, the goal of this study was to develop a rapid computational model to predict reverse LV remodeling following CRT. We adapted our recently developed computational model of LV remodeling to simulate the mechanics of ventricular dyssynchrony and added a rapid electrical model to predict electrical activation timing. The model was calibrated to quantitatively match changes in hemodynamics and global and local LV wall mass from a canine study of LBBB and CRT. The calibrated model was used to investigate the influence of LV lead location and ischemia on CRT remodeling outcome. Our model results suggest that remodeling outcome varies with both lead location and ischemia location, and does not always correlate with short-term improvement in QRS duration. The results and time frame required to customize and run this model suggest promise for this approach in a clinical setting.

Striated muscle proteins are regulated both by mechanical deformation and by chemical post-translational modification

All cells sense force and build their cytoskeleton to optimize function. How is this achieved? Two major systems are involved. The first is that load deforms specific protein structures in a proportional and orientation-dependent manner. The second is post-translational modification of proteins as a consequence of signaling pathway activation. These two processes work together in a complex way so that local subcellular assembly as well as overall cell function are controlled. This review discusses many cell types but focuses on striated muscle. Detailed information is provided on how load deforms the structure of proteins in the focal adhesions and filaments, using α-actinin, vinculin, talin, focal adhesion kinase, LIM domain-containing proteins, filamin, myosin, titin, and telethonin as examples. Second messenger signals arising from external triggers are distributed throughout the cell causing post-translational or chemical modifications of protein structures, with the actin capping protein CapZ and troponin as examples. There are numerous unanswered questions of how mechanical and chemical signals are integrated by muscle proteins to regulate sarcomere structure and function yet to be studied. Therefore, more research is needed to see how external triggers are integrated with local tension generated within the cell. Nonetheless, maintenance of tension in the sarcomere is the essential and dominant mechanism, leading to the well-known phrase in exercise physiology: "use it or lose it."

The influence of boundary conditions and protein availability on the remodeling of cardiomyocytes

The heart muscle is capable of growing and remodeling in response to changes in its mechanical and hormonal environment. While this capability is essential to the healthy function of the heart, under extreme conditions it may also lead to heart failure. In this work, we derive a thermodynamically based and microscopically motivated model that highlights the influence of mechanical boundary conditions and hormonal changes on the remodeling process in cardiomyocytes. We begin with a description of the kinematics associated with the remodeling process. Specifically, we derive relations between the macroscopic deformation, the number of sarcomeres, the sarcomere stretch, and the number of myofibrils in the cell. We follow with the derivation of evolution equations that describe the production and the degradation of protein in the cytosol. Next, we postulate a dissipation-based formulation that characterizes the remodeling process. We show that this process stems from a competition between the internal energy, the entropy, the energy supplied to the system by ATP and other sources, and dissipation mechanisms. To illustrate the merit of this framework, we study four initial and boundary conditions: (1) a myocyte undergoing isometric contractions in the presence of either an infinite or a limited supply of proteins and (2) a myocyte that is free to dilate along the radial direction with an infinite and a limited supply of proteins. This work underscores the importance of boundary conditions on the overall remodeling response of cardiomyocytes, suggesting a plausible mechanism that might play a role in distinguishing eccentric vs. concentric hypertrophy.

Bioengineering Systems for Modulating Notch Signaling in Cardiovascular Development, Disease, and Regeneration

The Notch intercellular signaling pathways play significant roles in cardiovascular development, disease, and regeneration through modulating cardiovascular cell specification, proliferation, differentiation, and morphogenesis. The dysregulation of Notch signaling leads to malfunction and maldevelopment of the cardiovascular system. Currently, most findings on Notch signaling rely on animal models and a few clinical studies, which significantly bottleneck the understanding of Notch signaling-associated human cardiovascular development and disease. Recent advances in the bioengineering systems and human pluripotent stem cell-derived cardiovascular cells pave the way to decipher the role of Notch signaling in cardiovascular-related cells (endothelial cells, cardiomyocytes, smooth muscle cells, fibroblasts, and immune cells), and intercellular crosstalk in the physiological, pathological, and regenerative context of the complex human cardiovascular system. In this review, we first summarize the significant roles of Notch signaling in individual cardiac cell types. We then cover the bioengineering systems of microfluidics, hydrogel, spheroid, and 3D bioprinting, which are currently being used for modeling and studying Notch signaling in the cardiovascular system. At last, we provide insights into ancillary supports of bioengineering systems, varied types of cardiovascular cells, and advanced characterization approaches in further refining Notch signaling in cardiovascular development, disease, and regeneration.

Characterization of Exercise-Induced Myocardium Growth Using Finite Element Modeling and Bayesian Optimization

Cardiomyocyte growth can occur in both physiological (exercised-induced) and pathological (e.g., volume overload and pressure overload) conditions leading to left ventricular (LV) hypertrophy. Studies using animal models and histology have demonstrated the growth and remodeling process at the organ level and tissue-cellular level, respectively. However, the driving factors of growth and the mechanistic link between organ, tissue, and cellular growth remains poorly understood. Computational models have the potential to bridge this gap by using constitutive models that describe the growth and remodeling process of the myocardium coupled with finite element (FE) analysis to model the biomechanics of the heart at the organ level. Using subject-specific imaging data of the LV geometry at two different time points, an FE model can be created with the inverse method to characterize the growth parameters of each subject. In this study, we developed a framework that takes in vivo cardiac magnetic resonance (CMR) imaging data of exercised porcine model and uses FE and Bayesian optimization to characterize myocardium growth in the transverse and longitudinal directions. The efficacy of this framework was demonstrated by successfully predicting growth parameters of 18 synthetic LV targeted masks which were generated from three LV porcine geometries. The framework was further used to characterize growth parameters in 4 swine subjects that had been exercised. The study suggested that exercise-induced growth in swine is prone to longitudinal cardiomyocyte growth (58.0 ± 19.6% after 6 weeks and 79.3 ± 15.6% after 12 weeks) compared to transverse growth (4.0 ± 8.0% after 6 weeks and 7.8 ± 9.4% after 12 weeks). This framework can be used to characterize myocardial growth in different phenotypes of LV hypertrophy and can be incorporated with other growth constitutive models to study different hypothetical growth mechanisms.

Cofilin Loss in Drosophila Muscles Contributes to Muscle Weakness through Defective Sarcomerogenesis during Muscle Growth

Sarcomeres, the fundamental contractile units of muscles, are conserved structures composed of actin thin filaments and myosin thick filaments. How sarcomeres are formed and maintained is not well understood. Here, we show that knockdown of Drosophila cofilin (DmCFL), an actin depolymerizing factor, disrupts both sarcomere structure and muscle function. The loss of DmCFL also results in the formation of sarcomeric protein aggregates and impairs sarcomere addition during growth. The activation of the proteasome delays muscle deterioration in our model. Furthermore, we investigate how a point mutation in CFL2 that causes nemaline myopathy (NM) in humans affects CFL function and leads to the muscle phenotypes observed in vivo. Our data provide significant insights to the role of CFLs during sarcomere formation, as well as mechanistic implications for disease progression in NM patients.

How sarcomeres are added and maintained in a growing muscle cell is unclear. Balakrishnan et al. observed that DmCFL loss in growing muscles affects sarcomere size and addition through unregulated actin polymerization. This results in a collapse of sarcomere and muscle structure, formation of large protein aggregates, and muscle weakness.

Bioinspired Device Improves The Cardiogenic Potential of Cardiac Progenitor Cells

OBJECTIVE

Functional cardiac tissue engineering holds promise as a candidate approach for myocardial infarction. Tissue engineering has emerged to generate functional tissue constructs and provide an alternative means to repair and regenerate damaged heart tissues.

MATERIALS AND METHODS

In this experimental study, we fabricated a composite polycaprolactone (PCL)/gelatine electrospun scaffold with aligned nanofibres. The electrospinning parameters and optimum proportion of the PCL/ gelatine were tested to design a scaffold with aligned and homogenized nanofibres. Using scanning electron microscopy (SEM) and mechanophysical testes, the PCL/gelatine composite scaffold with a ratio of 70:30 was selected. In order to simulate cardiac contraction, a developed mechanical loading device (MLD) was used to apply a mechanical stress with specific frequency and tensile rate to cardiac progenitor cells (CPCs) in the direction of the aligned nanofibres. Cell metabolic determination of CPCs was performed using real-time polymerase chain reaction(RT-PCR).

RESULTS

Physicochemical and mechanical characterization showed that the PCL/gelatine composite scaffold with a ratio of 70:30 was the best sample. In vitro analysis showed that the scaffold supported active metabolism and proliferation of CPCs, and the generation of uniform cellular constructs after five days. Real-time PCR analysis revealed elevated expressions of the specific genes for synchronizing beating cells (MYH-6, TTN and CX-43) on the dynamic scaffolds compared to the control sample with a static culture system.

CONCLUSION

Our study provides a robust platform for generation of synchronized beating cells on a nanofibre patch that can be used in cardiac tissue engineering applications in the near future.

Mechanical stretch promotes antioxidant responses and cardiomyogenic differentiation in P19 cells

Accumulating evidence has suggested that mechanical stimuli play a crucial role in regulating the lineage-specific differentiation of stem cells through fine-tuning redox balance. We aimed to investigate the effects of cyclic tensile strain (CTS) on the expression of antioxidant enzymes and cardiac-specific genes in P19 cells, a widely characterized tool for cardiac differentiation research. A stretching device was applied to generate different magnitude and duration of cyclic strains on P19 cells. The messenger RNA and protein levels of targeted genes were determined by real-time polymerase chain reaction and Western blot assays, respectively. Proper magnitude and duration of cognitive stimulation therapy (CST) stimulation substantially enhanced the expression of both antioxidant enzymes and cardiac-specific genes in P19 cells. Sirtuin 1 (SIRT1) played an essential role in the CTS-induced cardiomyogenic differentiation of P19, as evidenced by changes in the expression of antioxidant enzymes and cardiac-specific genes. Mechanical loading promoted the cardiomyogenic differentiation of P19 cells. SIRT1 was involved in CST-mediated P19 differentiation, implying that SIRT1 might serve as an important target for developing methods to promote cardiomyogenic differentiation of stem cells.

Microtubules orchestrate local translation to enable cardiac growth

Hypertension, exercise, and pregnancy are common triggers of cardiac remodeling, which occurs primarily through the hypertrophy of individual cardiomyocytes. During hypertrophy, stress-induced signal transduction increases cardiomyocyte transcription and translation, which promotes the addition of new contractile units through poorly understood mechanisms. The cardiomyocyte microtubule network is also implicated in hypertrophy, but via an unknown role. Here, we show that microtubules are indispensable for cardiac growth via spatiotemporal control of the translational machinery. We find that the microtubule motor Kinesin-1 distributes mRNAs and ribosomes along microtubule tracks to discrete domains within the cardiomyocyte. Upon hypertrophic stimulation, microtubules redistribute mRNAs and new protein synthesis to sites of growth at the cell periphery. If the microtubule network is disrupted, mRNAs and ribosomes collapse around the nucleus, which results in mislocalized protein synthesis, the rapid degradation of new proteins, and a failure of growth, despite normally increased translation rates. Together, these data indicate that mRNAs and ribosomes are actively transported to specific sites to facilitate local translation and assembly of contractile units, and suggest that properly localized translation – and not simply translation rate – is a critical determinant of cardiac hypertrophy. In this work, we find that microtubule based-transport is essential to couple augmented transcription and translation to productive cardiomyocyte growth during cardiac stress.

New contractile units are required during cardiac hypertrophy, though it remains unclear precisely where and how these new sarcomeres are added. Here the authors reveal that in the heart, microtubules spatiotemporally regulate mRNAs and ribosomes to build new sarcomeres, a role which is essential for growth.

Stimuli-responsive biomaterials for cardiac tissue engineering and dynamic mechanobiology

Since the term "smart materials" was put forward in the 1980s, stimuli-responsive biomaterials have been used as powerful tools in tissue engineering, mechanobiology, and clinical applications. For the purpose of myocardial repair and regeneration, stimuli-responsive biomaterials are employed to fabricate hydrogels and nanoparticles for targeted delivery of therapeutic drugs and cells, which have been proved to alleviate disease progression and enhance tissue regeneration. By reproducing the sophisticated and dynamic microenvironment of the native heart, stimuli-responsive biomaterials have also been used to engineer dynamic culture systems to understand how cardiac cells and tissues respond to progressive changes in extracellular microenvironments, enabling the investigation of dynamic cell mechanobiology. Here, we provide an overview of stimuli-responsive biomaterials used in cardiovascular research applications, with a specific focus on cardiac tissue engineering and dynamic cell mechanobiology. We also discuss how these smart materials can be utilized to mimic the dynamic microenvironment during heart development, which might provide an opportunity to reveal the fundamental mechanisms of cardiomyogenesis and cardiac maturation.

Mechanical stimuli for left ventricular growth during pressure overload

BACKGROUND

The mechanical stimulus (i.e. stress or stretch) for growth occurring in the pressure-overloaded left ventricle (LV) is not exactly known.

OBJECTIVE

To address this issue, we investigate the correlation between local ventricular growth (indexed by local wall thickness) and the local acute changes in mechanical stimuli after aortic banding.

METHODS

LV geometric data were extracted from 3D echo measurements at baseline and 2 weeks in the aortic banding swine model (n = 4). We developed and calibrated animal-specific finite element (FE) model of LV mechanics against pressure and volume waveforms measured at baseline. After the simulation of the acute effects of pressure-overload, the local changes of maximum, mean and minimum myocardial stretches and stresses in three orthogonal material directions (i.e., fiber, sheet and sheet-normal) over a cardiac cycle were quantified. Correlation between mechanical quantities and the corresponding measured local changes in wall thickness was quantified using the Pearson correlation number (PCN) and Spearman rank correlation number (SCN).

RESULTS

At 2 weeks after banding, the average septum thickness decreased from 10.6 ± 2.92mm to 9.49 ± 2.02mm, whereas the LV free-wall thickness increased from 8.69 ± 1.64mm to 9.4 ± 1.22mm. The FE results show strong correlation of growth with the changes in maximum fiber stress (PCN = 0.5471, SCN = 0.5111) and changes in the mean sheet-normal stress (PCN= 0.5266, SCN = 0.5256). Myocardial stretches, however, do not have good correlation with growth.

CONCLUSION

These results suggest that fiber stress is the mechanical stimuli for LV growth in pressure-overload.

In Vivo-Like Morphology of Intercalated Discs Achieved in a Neonatal Cardiomyocyte Culture Model

In vitro cultures to be used in various analytical investigations of cardiomyocyte (CM) growth and function for enhancing insight into physiological and pathological mechanisms should closely express in vivo morphology. The aim of the studies is to explore how to use microfabrication and physical-cue-addition techniques to establish a neonatal rat CM culture model that expresses an end-to-end connected rod shape with in vivo-like intercalated discs (ICDs). Freshly isolated neonatal rat CMs were cultured on microgrooved polydimethylsiloxane substrate. Cell alignment and ICD orientation were evaluated using confocal fluorescence and transmission electron microscopy under various combinations of different culture conditions. Cyclic stretch and blebbistatin tests were conducted to explore mechanical and electrical effects. Laboratory-made MATLAB software was developed to quantify cell alignment and ICD orientation. Our results demonstrate that the mechanical effect associated with the electrical stimulation may contribute to step-like ICD formation viewed from the top. In addition, our study reveals that a suspended elastic substrate that was slack with scattered folds, not taut, enabled CM contraction of equal strength on both apical and basal cell surfaces, allowing the cultured CMs to express a three-dimensional rod shape with disc-like ICDs viewed cross-sectionally. Impact statement In this article, we describe how the tugging forces generated by cardiomyocytes (CMs) facilitate the formation of the morphology of the intercalated discs (ICDs) to achieve mechanoelectrical coupling between CMs. Correspondingly, we report experimental techniques we developed to enable the in vivo-like behavior of the tugging forces to support the development of in vivo-like morphology in ICDs. These techniques will enhance insight into physiological and pathological mechanisms related to the development of tissue-engineered cardiac constructs in various analytical investigations of CM growth and function.

Systems biology approach to exploring the effect of cyclic stretching on cardiac cell physiology

Although mechanical forces are involved in pressure-overloaded cardiomyopathy, their effects on gene transcription profiles are not fully understood. Here, we used next-generation sequencing (NGS) to investigate changes in genomic profiles after cyclic mechanical stretching of human cardiomyocytes. We found that 85, 87, 32, 29, and 28 genes were differentially expressed after 1, 4, 12, 24, and 48 hours of stretching. Furthermore, 10 of the 29 genes that were up-regulated and 11 of the 28 that were down-regulated after 24 h showed the same changes after 48 h. We then examined expression of the genes that encode serpin family E member 1 (SERPINE1), DNA-binding protein inhibitor 1 (ID1), DNA-binding protein inhibitor 3 (ID3), and CCL2, a cytokine that acts as chemotactic factor in monocytes, in an RT-PCR experiment. The same changes were observed for all four genes after all cyclic stretching durations, confirming the NGS results. Taken together, these findings suggest that cyclical stretching can alter cardiac cell physiology by activating cardiac cell metabolism and impacting cholesterol biosynthesis signaling.

Progressive Myofibril Reorganization of Human Cardiomyocytes on a Dynamic Nanotopographic Substrate

Cardiomyocyte (CM) alignment with striated myofibril organization is developed during early cardiac organogenesis. Previous work has successfully achieved in vitro CM alignment using a variety of biomaterial scaffolds and substrates with static topographic features. However, the cellular processes that occur during the response of CMs to dynamic surface topographic changes, which may provide a model of in vivo developmental progress of CM alignment within embryonic myocardium, remains poorly understood. To gain insights into these cellular processes involved in the response of CMs to dynamic topographic changes, we developed a dynamic topographic substrate that employs a shape memory polymer coated with polyelectrolyte multilayers to produce a flat-to-wrinkle surface transition when triggered by a change in incubation temperature. Using this system, we investigated cellular morphological alignment and intracellular myofibril reorganization in response to the dynamic wrinkle formation. Hence, we identified the progressive cellular processes of human-induced pluripotent stem cell-CMs in a time-dependent manner, which could provide a foundation for a mechanistic model of cardiac myofibril reorganization in response to extracellular microenvironment changes.

Heart Plasticity in Response to Pressure- and Volume-Overload: A Review of Findings in Compensated and Decompensated Phenotypes

The adult human heart has an exceptional ability to alter its phenotype to adapt to changes in environmental demand. This response involves metabolic, mechanical, electrical, and structural alterations, and is known as cardiac plasticity. Understanding the drivers of cardiac plasticity is essential for development of therapeutic agents. This is particularly important in contemporary cardiology, which uses treatments with peripheral effects (e.g., on kidneys, adrenal glands). This review focuses on the effects of different hemodynamic loads on myocardial phenotype. We examine mechanical scenarios of pressure- and volume overload, from the initial insult, to compensated, and ultimately decompensated stage. We discuss how different hemodynamic conditions occur and are underlined by distinct phenotypic and molecular changes. We complete the review by exploring how current basic cardiac research should leverage available cardiac models to study mechanical load in its different presentations.

Multiscale Models of Cardiac Muscle Biophysics and Tissue Remodeling in Hypertrophic Cardiomyopathies

Myocardial hypertrophy is the result of sustained perturbations to the mechanical and/or neurohormonal homeostasis of cardiac cells and is driven by integrated, multiscale biophysical and biochemical processes that are currently not well defined. In this brief review, we highlight recent computational and experimental models of cardiac hypertrophy that span mechanisms from the molecular level to the tissue level. Specifically, we focus on: (i) molecular-level models of the structural dynamics of sarcomere proteins in hypertrophic hearts, (ii) cellular-level models of excitation-contraction coupling and mechanosensitive signaling in disease-state myocytes, and (iii) organ-level models of myocardial growth kinematics and predictors thereof. Finally, we discuss how spanning these scales and combining multiple experimental/computational models will provide new information about the processes governing hypertrophy and potential methods to prevent or reverse them.

Mechanical Forces Regulate Cardiomyocyte Myofilament Maturation via the VCL-SSH1-CFL Axis

Mechanical forces regulate cell behavior and tissue morphogenesis. During cardiac development, mechanical stimuli from the heartbeat are required for cardiomyocyte maturation, but the underlying molecular mechanisms remain unclear. Here, we first show that the forces of the contracting heart regulate the localization and activation of the cytoskeletal protein vinculin (VCL), which we find to be essential for myofilament maturation. To further analyze the role of VCL in this process, we examined its interactome in contracting versus non-contracting cardiomyocytes and, in addition to several known interactors, including actin regulators, identified the slingshot protein phosphatase SSH1. We show how VCL recruits SSH1 and its effector, the actin depolymerizing factor cofilin (CFL), to regulate F-actin rearrangement and promote cardiomyocyte myofilament maturation. Overall, our results reveal that mechanical forces generated by cardiac contractility regulate cardiomyocyte maturation through the VCL-SSH1-CFL axis, providing further insight into how mechanical forces are transmitted intracellularly to regulate myofilament maturation.

Model of Anisotropic Reverse Cardiac Growth in Mechanical Dyssynchrony

Based on recent single-cell experiments showing that longitudinal myocyte stretch produces both parallel and serial addition of sarcomeres, we developed an anisotropic growth constitutive model with elastic myofiber stretch as the growth stimuli to simulate long-term changes in biventricular geometry associated with alterations in cardiac electromechanics. The constitutive model is developed based on the volumetric growth framework. In the model, local growth evolutions of the myocyte’s longitudinal and transverse directions are driven by the deviations of maximum elastic myofiber stretch over a cardiac cycle from its corresponding local homeostatic set point, but with different sensitivities. Local homeostatic set point is determined from a simulation with normal activation pattern. The growth constitutive model is coupled to an electromechanics model and calibrated based on both global and local ventricular geometrical changes associated with chronic left ventricular free wall pacing found in previous animal experiments. We show that the coupled electromechanics-growth model can quantitatively reproduce the following: (1) Thinning and thickening of the ventricular wall respectively at early and late activated regions and (2) Global left ventricular dilation as measured in experiments. These findings reinforce the role of elastic myofiber stretch as a growth stimulant at both cellular level and tissue-level.

Changes in the crystallographic structures of cardiac myosin filaments detected by polarization-dependent second harmonic generation microscopy

Detecting the structural changes caused by volume and pressure overload is critical to comprehending the mechanisms of physiologic and pathologic hypertrophy. This study explores the structural changes at the crystallographic level in myosin filaments in volume- and pressure-overloaded myocardia through polarization-dependent second harmonic generation microscopy. Here, for the first time, we report that the ratio of nonlinear susceptibility tensor components d₃₃/d₁₅ increased significantly in volume- and pressure-overloaded myocardial tissues compared with the ratio in normal mouse myocardial tissues. Through cell stretch experiments, we demonstrated that mechanical tension plays an important role in the increase of d₃₃/d₁₅ in volume- and pressure-overloaded myocardial tissues.

Hang on tight: reprogramming the cell with microstructural cues

Cells interact intimately with complex microdomains in their extracellular matrix (ECM) and maintain a delicate balance of mechanical forces through mechanosensitive cellular components. Tissue injury results in acute degradation of the ECM and disruption of cell-ECM contacts, manifesting in loss of cytoskeletal tension, leading to pathological cell transformation and the onset of disease. Recently, microscale hydrogel constructs have been developed to provide cells with microdomains to form focal adhesion binding sites, which enable restoration of cytoskeletal tension. These synthetic anchors can recapitulate the complex 3D architecture of the native ECM to provide microtopographical cues. The mechanical deformation of proteins at the cell surface can activate signaling cascades to modulate downstream gene-level transcription, making this a unique materials-based approach for reprogramming cell behavior. An overview of the mechanisms underlying these mechanosensitive interactions in fibroblasts, stem and other cell types is provided to review their effects on cellular reprogramming. Recent investigations on the fabrication, functionalization and implementation of these materials and microtopographical features for drug testing and therapeutic applications are discussed.

A microscopically motivated model for the remodeling of cardiomyocytes

We present a thermodynamically based model that captures the remodeling effects in cardiac muscle cells. This work begins with the formulation of the kinematics of a cardiomyocyte resulting from a prescribed macroscopic deformation and the reorganization of the internal structure. Specifically, relations between the macroscopic deformation and the number of sarcomeres, the sarcomere stretch, and the number of myofibrils in the cell are determined. The remodeling process is split into two separate phases-(1) elongation/shortening of the existing myofibrils by addition/detachment of sarcomeres and (2) formation of new myofibrils. The remodeling associated with each phase is modeled through a dissipation postulate. We show that remodeling is based on a competition between the internal energy, the entropy, the energy supplied to the system by ATP and other sources to drive the remodeling process, and dissipation mechanisms. While the variations in entropy associated with phase (1) are neglected, the substantial entropy loss associated with the formation of new myofibrils is determined. To illustrate the merit of the proposed framework, we compute the response of cardiomyocytes subjected to isometric axial stretch that are either free to deform or fixed in the transverse direction. We also examine the predictions of this model for cardiomyocytes subjected to various cyclic loadings. The proposed framework is capable of capturing a wide range of remodeling effects and agrees with experimental observations.

Modeling cardiac complexity: Advancements in myocardial models and analytical techniques for physiological investigation and therapeutic development in vitro

Cardiomyopathies, heart failure, and arrhythmias or conduction blockages impact millions of patients worldwide and are associated with marked increases in sudden cardiac death, decline in the quality of life, and the induction of secondary pathologies. These pathologies stem from dysfunction in the contractile or conductive properties of the cardiomyocyte, which as a result is a focus of fundamental investigation, drug discovery and therapeutic development, and tissue engineering. All of these foci require in vitro myocardial models and experimental techniques to probe the physiological functions of the cardiomyocyte. In this review, we provide a detailed exploration of different cell models, disease modeling strategies, and tissue constructs used from basic to translational research. Furthermore, we highlight recent advancements in imaging, electrophysiology, metabolic measurements, and mechanical and contractile characterization modalities that are advancing our understanding of cardiomyocyte physiology. With this review, we aim to both provide a biological framework for engineers contributing to the field and demonstrate the technical basis and limitations underlying physiological measurement modalities for biologists attempting to take advantage of these state-of-the-art techniques.

CapZ integrates several signaling pathways in response to mechanical stiffness

Changes in mechanical load, hormones, or metabolic stress provoke remodeling of the actin-based thin filaments within muscle fibers. Solís and Russell show that several signaling pathways converge at the actin-capping protein CapZ to regulate muscle fiber growth in response to mechanical stiffness and neurohumoral signaling.

Muscle adaptation is a response to physiological demand elicited by changes in mechanical load, hormones, or metabolic stress. Cytoskeletal remodeling processes in many cell types are thought to be primarily regulated by thin filament formation due to actin-binding accessory proteins, such as the actin-capping protein. Here, we hypothesize that in muscle, the actin-capping protein (named CapZ) integrates signaling by a variety of pathways, including phosphorylation and phosphatidylinositol 4,5-bisphosphate (PIP2) binding, to regulate muscle fiber growth in response to mechanical load. To test this hypothesis, we assess mechanotransduction signaling that regulates muscle growth using neonatal rat ventricular myocytes cultured on substrates with the stiffness of the healthy myocardium (10 kPa), fibrotic myocardium (100 kPa), or glass. We investigate how PIP2 signaling affects CapZ using the PIP2 sequestering agent neomycin and the effect of PKC-mediated CapZ phosphorylation using the PKC-activating drug phorbol 12-myristate 13-acetate (PMA). Molecular simulations suggest that close interactions between PIP2 and the β-tentacle of CapZ are modified by phosphorylation at T267. Fluorescence recovery after photobleaching (FRAP) demonstrates that the kinetic binding constant of CapZ to sarcomeric thin filaments in living muscle cells increases with stiffness or PMA treatment but is diminished by PIP2 reduction. Furthermore, CapZ with a deletion of the β-tentacle that lacks the phosphorylation site T267 shows increased FRAP kinetics with lack of sensitivity to PMA treatment or PIP2 reduction. Förster resonance energy transfer (FRET) probes the molecular interactions between PIP2 and CapZ, which are decreased by PIP2 availability or by the β-tentacle truncation. These data suggest that CapZ is bound to actin tightly in the idle, locked state, with little phosphorylation or PIP2 binding. However, this tight binding is loosened in growth states triggered by mechanical stimuli such as substrate stiffness, which may have relevance to fibrotic heart disease.

Titin-based mechanosensing modulates muscle hypertrophy

BACKGROUND

Titin is an elastic sarcomeric filament that has been proposed to play a key role in mechanosensing and trophicity of muscle. However, evidence for this proposal is scarce due to the lack of appropriate experimental models to directly test the role of titin in mechanosensing.

METHODS

We used unilateral diaphragm denervation (UDD) in mice, an in vivo model in which the denervated hemidiaphragm is passively stretched by the contralateral, innervated hemidiaphragm and hypertrophy rapidly occurs.

RESULTS

In wildtype mice, the denervated hemidiaphragm mass increased 48 ± 3% after 6 days of UDD, due to the addition of both sarcomeres in series and in parallel. To test whether titin stiffness modulates the hypertrophy response, RBM20ΔRRM and TtnΔIAjxn mouse models were used, with decreased and increased titin stiffness, respectively. RBM20ΔRRM mice (reduced stiffness) showed a 20 ± 6% attenuated hypertrophy response, whereas the TtnΔIAjxn mice (increased stiffness) showed an 18 ± 8% exaggerated response after UDD. Thus, muscle hypertrophy scales with titin stiffness. Protein expression analysis revealed that titin-binding proteins implicated previously in muscle trophicity were induced during UDD, MARP1 & 2, FHL1, and MuRF1.

CONCLUSIONS

Titin functions as a mechanosensor that regulates muscle trophicity.

Living Matter: Mesoscopic Active Materials

An introduction to the physical properties of living active matter at the mesoscopic scale (tens of nanometers to micrometers) and their unique features compared with "dead," nonactive matter is presented. This field of research is increasingly denoted as "biological physics" where physics includes chemical physics, soft matter physics, hydrodynamics, mechanics, and the related engineering sciences. The focus is on the emergent properties of these systems and their collective behavior, which results in active self-organization and how they relate to cellular-level biological function. These include locomotion (cell motility and migration) forces that give rise to cell division, the growth and form of cellular assemblies in development, the beating of heart cells, and the effects of mechanical perturbations such as shear flow (in the bloodstream) or adhesion to other cells or tissues. An introduction to the fundamental concepts and theory with selected experimental examples related to the authors' own research is presented, including red-blood-cell membrane fluctuations, motion of the nucleus within an egg cell, self-contracting acto-myosin gels, and structure and beating of heart cells (cardiomyocytes), including how they can be driven by an oscillating, mechanical probe.

PKC epsilon signaling effect on actin assembly is diminished in cardiomyocytes when challenged to additional work in a stiff microenvironment

The stiffness of the microenvironment surrounding a cell can result in cytoskeletal remodeling, leading to altered cell function and tissue macrostructure. In this study, we tuned the stiffness of the underlying substratum on which neonatal rat cardiomyocytes were grown in culture to mimic normal (10 kPa), pathological stiffness of fibrotic myocardium (100 kPa), and a nonphysiological extreme (glass). Cardiomyocytes were then challenged by beta adrenergic stimulation through isoproterenol treatment to investigate the response to acute work demand for cells grown on surfaces of varying stiffness. In particular, the PKCɛ signaling pathway and its role in actin assembly dynamics were examined. Significant changes in contractile metrics were seen on cardiomyocytes grown on different surfaces, but all cells responded to isoproterenol treatment, eventually reaching similar time to peak tension. In contrast, the assembly rate of actin was significantly higher on stiff surfaces, so that only cells grown on soft surfaces were able to respond to acute isoproterenol treatment. Förster Resonance Energy Transfer of immunofluorescence on the cytoskeletal fraction of cardiomyocytes confirmed that the molecular interaction of PKCɛ with the actin capping protein, CapZ, was very low on soft substrata but significantly increased with isoproterenol treatment, or on stiff substrata. Therefore, the stiffness of the culture surface chosen for in vitro experiments might mask the normal signaling and affect the ability to translate basic science more effectively into human therapy.

Contractile deficits in engineered cardiac microtissues as a result of MYBPC3 deficiency and mechanical overload

The integration of in vitro cardiac tissue models, human induced pluripotent stem cells (hiPSCs) and genome-editing tools allows for the enhanced interrogation of physiological phenotypes and the recapitulation of disease pathologies. Here, in a cardiac tissue model consisting of filamentous 3D matrices populated with cardiomyocytes (CMs) derived from healthy wild-type hiPSCs (WT hiPSC-CMs) or from isogenic hiPSCs deficient in the sarcomere protein cardiac myosin binding protein C (MYBPC3^−/− hiPSC-CMs), we show that the WT microtissues adapted to the mechanical environment with increased contraction force commensurate to matrix stiffness, whereas the MYBPC3^−/− microtissues exhibited impaired force-development kinetics regardless of matrix stiffness and deficient contraction force only when grown on matrices with high fiber stiffness. Under mechanical overload, the MYBPC3^−/− microtissues had a higher degree of calcium transient abnormalities, and exhibited an accelerated decay of calcium dynamics as well as calcium desensitization, which accelerated when contracting against stiffer fibers. Our findings suggest that MYBPC3 deficiency and the presence of environmental stresses synergistically lead to contractile deficits in the cardiac tissues.

Maturation of Pluripotent Stem Cell-Derived Cardiomyocytes: a Critical Step for Drug Development and Cell Therapy

Cardiomyocytes derived from human pluripotent stem cells (hPSCs) are emerging as an invaluable alternative to primarily sourced cardiomyocytes. The potentially unlimited number of hPSC-derived cardiomyocytes (hPSC-CMs) that may be obtained in vitro facilitates high-throughput applications like cell transplantation for myocardial repair, cardiotoxicity testing during drug development, and patient-specific disease modeling. Despite promising progress in these areas, a major disadvantage that limits the use of hPSC-CMs is their immaturity. Improvements to the maturity of hPSC-CMs are necessary to capture physiologically relevant responses. Herein, we review and discuss the different maturation strategies undertaken by others to improve the morphology, contractility, electrophysiology, and metabolism of these derived cardiomyocytes.

Modeling Human Cardiac Hypertrophy in Stem Cell-Derived Cardiomyocytes

Cardiac hypertrophy accompanies many forms of cardiovascular diseases. The mechanisms behind the development and regulation of cardiac hypertrophy in the human setting are poorly understood, which can be partially attributed to the lack of a human cardiomyocyte-based preclinical test system recapitulating features of diseased myocardium. The objective of our study is to determine whether human embryonic stem cell-derived cardiomyocytes (hESC-CMs) subjected to mechanical stretch can be used as an adequate in vitro model for studying molecular mechanisms of cardiac hypertrophy. We show that hESC-CMs subjected to cyclic stretch, which mimics mechanical overload, exhibit essential features of a hypertrophic state on structural, functional, and gene expression levels. The presented hESC-CM stretch approach provides insight into molecular mechanisms behind mechanotransduction and cardiac hypertrophy and lays groundwork for the development of pharmacological approaches as well as for discovering potential circulating biomarkers of cardiac dysfunction.