Natural Silk as a Photonics Component: a Study on Its Light Guiding and Nonlinear Optical Properties

Tailoring hydrophobicity and strength in spider silk-inspired coatings via thermal treatments

The advent of advanced coatings has transformed material functionalities, extending their roles from basic coverage and visual appeal to include unique properties such as self-healing, superior hydrophobicity, and antimicrobial action. However, the traditional dependency on petrochemical-derived materials for these coatings raises environmental concerns. This study proposes the use of renewable and alternative materials for coating development. We present the use of bioengineered spider silk-inspired protein (SSIP), produced through recombinant technology, as a viable, eco-friendly alternative due to their ease of processing under ambient pressure and the utilization of water as a solvent, alongside their exceptional physicochemical properties. Our research investigates the effects of different thermal treatments and protein concentrations on the mechanical strength and surface water repellency of coatings on silica bases. Our findings reveal a direct correlation between the temperature of heat treatment and the enhancements in surface hydrophobicity and mechanical strength, where elevated temperatures facilitate increased resistance to water and improved mechanical integrity. Consequently, we advocate SSIPs present a promising, sustainable choice for advanced coatings, providing a pathway to fine-tune coating recipes for better mechanical and hydrophobic properties with a reduced ecological footprint, finding potential uses in various fields such as electronics.

Mechanically Robust Biopolymer Optical Fibers with Enhanced Performance in the Near-Infrared Region

Polymer optical fibers (POFs) are lightweight, fatigue-tolerant, and suitable for local area networks, automobiles, aerospace, smart textiles, supercomputers, and servers. However, commercially available POFs are exclusively fabricated using synthetic polymers derived from nonrenewable resources. Recently, attempts have been made to fabricate biocompatible and biopolymeric optical fibers. However, their limitations in mechanical performance, thermal stability, and optical properties foil practical applications in waveguiding. Here, we report a comprehensive study of the preparation of biopolymer optical fibers with tailored mechanical strength, thermal properties, and their short-distance applications. Specifically, we use alginate as one of the key components with methylcelluloses to promote readily scalable wet spinning at ambient conditions to fabricate 21 combinations of composite fibers. The fibers display high maximum strain (up to 58%), Young's modulus (up to 11 GPa), modulus of toughness (up to 63 MJ/m3), and a high strength (up to 195 MPa), depending on the composition and fabrication conditions. The modulus of toughness is comparable to that of glass optical fibers, while the maximum strain is nearly 15 times higher. The mechanically robust fibers with high thermal stability allow rapid humidity, touch sensing, and complex shapes such as serpentine, coil, or twisted structures without losing their light transmission properties. More importantly, the fibers display enhanced optical performance and sensitivity in the near-infrared (NIR) region, making them suitable for advanced biomedical applications. Our work suggests that biobased materials offer innovative solutions to create short-distance optical fibers from fossil fuel-free resources with novel functionalities.

Open-source toolbox for photographic characterization of optical propagation

An alternative method for characterizing optical propagation in waveguide structures based on scattered light imaging is presented and demonstrated for the spectral range of 450-980 nm. Propagation losses as low as 1.40 dB/cm are demonstrated in alumina spiral waveguides. AlGaAs-on-insulator waveguides are measured using a tunable laser and compared to cut-back measurements. On AlGaAs, a one-sigma uncertainty of 1.40 and 2.23 dB/cm for TE and TM polarizations is obtained for repetitions of measurements conducted on the same waveguide, highlighting the approach's reproducibility. An open-source toolbox is introduced, allowing for reliable processing of data and estimation of optical propagation losses.

Bioactive self-assembling silk fibroin-sericin films for skin tissue engineering

The quest for an ideal wound dressing material has been a strong motivation for researchers to explore novel biomaterials for this purpose. Such explorations have led to the extensive use of silk fibroin (SF) as a suitable polymer for several applications over the years. Unfortunately, another major silk protein-sericin has not received its due attention yet in spite of having favorable biological properties. In this study, we report an approach of blending SF and silk sericin (SS) without the usage of chemical crosslinkers is made possible by the usage of formic acid which evaporates to induceβ-sheets formation to form cytocompatible films. Raman spectroscopy confirms the presence of SF/SS components in blend and formation ofβ-sheet in films.In situ, gelation kinetics studies were conducted to understand the change in gelation properties with addition of sericin into SF. Methyl thiazolyl tetrazolium and live/dead assays were performed to study cellular attachment, viability and proliferation on SF/SS films. The antibacterial properties of SF/SS films were tested using Gram-negative and Gram-positive bacteria. The re-structured SF/SS films were stable, transparent, show good mechanical properties, antibacterial activity and cytocompatibility, therefore can serve as suitable biomaterial candidates for skin regeneration applications.

The LINC complex regulates Achilles tendon elastic modulus, Achilles and tail tendon collagen crimp, and Achilles and tail tendon lateral expansion during early postnatal development

There is limited understanding of how mechanical signals regulate tendon development. The nucleus has emerged as a major regulator of cellular mechanosensation, via the linker of nucleoskeleton and cytoskeleton (LINC) protein complex. Specific roles of LINC in tenogenesis have not been explored. In this study, we investigate how LINC regulates tendon development by disabling LINC-mediated mechanosensing via dominant negative (dn) expression of the Klarsicht, ANC-1, and Syne Homology (KASH) domain, which is necessary for LINC to function. We hypothesized that LINC regulates mechanotransduction in developing tendon, and that disabling LINC would impact tendon mechanical properties and structure in a mouse model of dnKASH. We used Achilles (AT) and tail (TT) tendons as representative energy-storing and limb-positioning tendons, respectively. Mechanical testing at postnatal day 10 showed that disabling the LINC complex via dnKASH significantly impacted tendon mechanical properties and cross-sectional area, and that effects differed between ATs and TTs. Collagen crimp distance was also impacted in dnKASH tendons, and was significantly decreased in ATs, and increased in TTs. Overall, we show that disruption to the LINC complex specifically impacts tendon mechanics and collagen crimp structure, with unique responses between an energy-storing and limb-positioning tendon. This suggests that nuclear mechanotransduction through LINC plays a role in regulating tendon formation during neonatal development.

In Situ Mineralizing Spinning of Strong and Tough Silk Fibers for Optical Waveguides

Biopolymer-based optical waveguides with low-loss light guiding performance and good biocompatibility are highly desired for applications in biomedical photonic devices. Herein, we report the preparation of silk optical fiber waveguides through bioinspired in situ mineralizing spinning, which possess excellent mechanical properties and low light loss. Natural silk fibroin was used as the main precursor for the wet spinning of the regenerated silk fibroin (RSF) fibers. Calcium carbonate nanocrystals (CaCO₃ NCs) were in situ grown in the RSF network and served as nucleation templates for mineralization during the spinning, leading to the formation of strong and tough fibers. CaCO₃ NCs can guide the structure transformation of silk fibroin from random coils to β-sheets, contributing to enhanced mechanical properties. The tensile strength and toughness of the obtained fibers are up to 0.83 ± 0.15 GPa and 181.98 ± 52.42 MJ·m^-3, obviously higher than those of natural silkworm silks and even comparable to spider silks. We further investigated the performance of the fibers as optical waveguides and observed a low light loss of 0.46 dB·cm^-1, which is much lower than natural silk fibers. We believed that these silk-based fibers with excellent mechanical and light propagation properties are promising for applications in biomedical light imaging and therapy.

Investigation of silk as a phantom material for ultrasound and photoacoustic imaging

Comprehensive characterization of biomedical imaging systems require phantoms that are easy to fabricate and can mimic human tissue. Additionally, with the arrival of engineered tissues, it is key to develop phantoms that can mimic bioengineered samples. In ultrasound and photoacoustic imaging, water-soluble phantom materials such as gelatin undergo rapid degradation while polymer-based materials such as polyvinyl alcohol are not conducive for generating bioengineered tissues that can incorporate cells. Here we propose silk protein-based hydrogels as an ultrasound and photoacoustic phantom material that has potential to provide a 3D environment for long-term sustainable cell growth. Common acoustic, optical, and biomechanical properties such as ultrasound attenuation, reduced scattering coefficient, and Young's modulus were measured. The results indicate that silk acoustically mimics many tissue types while exhibiting similar reduced optical scattering in the wavelength range of 400-1200 nm. Furthermore, silk-based materials can be stored long-term with no change in acoustic and optical properties, and hence can be utilized to assess the performance of ultrasound and photoacoustic systems.

Comparison of toxicity and cellular responses following pulmonary exposure to different types of nanofibers

Pulmonary effects of inhaled microfibers are an emerging public health concern. In this study, we investigated toxicity following pulmonary exposure to synthetic polyethylene oxide fibroin (PEONF) and silk fibroin (SFNF) nanofibers and the cellular responses. When instilled intratracheally weekly for four weeks, body weight gain was significantly reduced in female mice exposed to the higher dose of SFNF when compared with the control group. The total number of cells in the lungs was more significant in all treated groups than in the control, whereas the relative portion of neutrophils and eosinophils increased significantly only in female mice exposed to SFNF. Both types of nanofibers induced notable pathological changes and increased pulmonary expression of MCP-1α, CXCL1, and TGF-β. More importantly, blood calcium, creatinine kinase, sodium, and chloride concentration were affected significantly, showing sex- and material-dependent differences. The relative portion of eosinophils increased only in SFNF-treated mice. In addition, both types of nanofibers induced necrotic and late apoptotic cell death in alveolar macrophages after 24 h of exposure, with accompanying oxidative stress, increased NO production, cell membrane rupture, intracellular organelle damage, and intracellular calcium accumulation. Additionally, multinucleated giant cells were formed in cells exposed to PEONF or SFNF. Taken together, the findings indicate that inhaled PEONF and SFNF may cause systemic adverse health effects with lung tissue damage, showing differences by sex- and material. Furthermore, PEONF- and SFNF-induced inflammatory response may be partly due to the low clearance of dead (or damaged) pulmonary cells and the excellent durability of PEONF and SFNF.

Biocompatible spider silk-based metal-dielectric fiber optic sugar sensor

Various optical components employed in biomedical applications have been fabricated using spider silk because of its superior properties, such as elasticity, tensile strength, biodegradability, and biocompatibility. In this study, a highly sensitive fiber optic sugar sensor is fabricated using metal-nanolayer-coated spider silk. The spider silk, which is directly collected from Nephila pilipes, a giant wood spider, is naturally a protein-based biopolymer with great flexibility, low attenuation, and easy functionalization. The surface of the spider silk-based fiber is coated with a metal nano-layer by using the glancing angle deposition technique. This fiber optic sugar sensor is based on the principle of the change in the refractive indices of sugar solutions. The attained experimental results show that the proposed sugar sensor is highly sensitive in the detection of fructose, sucrose, and glucose concentrations. This work may provide a new way to realize precise and sensitive online sugar measurements for point-of-care diagnostics.

Metal-Nanostructure-Decorated Spider Silk for Highly Sensitive Refractive Index Sensing

Highly sensitive detection of refractive index (RI) is essential for the analysis of the bio-microenvironment and basic cellular reactions. To achieve this, optic-fiber RI sensors based on localized surface plasmon resonance (LSPR) have been widely used for their flexibility and high sensitivity. However, the current optic-fiber RI sensors are mainly fabricated using glass, which makes them face the challenges in biocompatibility and biosafety. In this work, a RI sensor with high sensitivity is fabricated using metal-nanostructure-decorated spider silk. The spider silk, which is directly dragged from Araneus ventricosus, is natural protein-based biopolymer with low attenuation, good biocompatibility and biodegradability, large RI, great flexibility, and easy functionalization. Hence, the spider silk can be an ideal alternative to glass for sensing in biological environments with a wide RI range. Different kinds of metal nanostructures, such as gold nanorods (GNRs), gold nanobipyramids (GNBP), and Ag@GNRs, are decorated on the surface of the spider silk utilizing the surface viscidity of the silk. By directing a beam of white light into the spider silk, the LSPR of the metal nanostructures was excited and a highly sensitive RI sensing (the highest sensitivity of 1746 nm per refractive index was achieved on the GNBP-decorated spider silk) was obtained. This work may pave a new way to precise and sensitive biosensing and bioanalysis.

An Image-Analysis-Based Method for the Prediction of Recombinant Protein Fiber Tensile Strength

Silk fibers derived from the cocoon of silk moths and the wide range of silks produced by spiders exhibit an array of features, such as extraordinary tensile strength, elasticity, and adhesive properties. The functional features and mechanical properties can be derived from the structural composition and organization of the silk fibers. Artificial recombinant protein fibers based on engineered spider silk proteins have been successfully made previously and represent a promising way towards the large-scale production of fibers with predesigned features. However, for the production and use of protein fibers, there is a need for reliable objective quality control procedures that could be automated and that do not destroy the fibers in the process. Furthermore, there is still a lack of understanding the specifics of how the structural composition and organization relate to the ultimate function of silk-like fibers. In this study, we develop a new method for the categorization of protein fibers that enabled a highly accurate prediction of fiber tensile strength. Based on the use of a common light microscope equipped with polarizers together with image analysis for the precise determination of fiber morphology and optical properties, this represents an easy-to-use, objective non-destructive quality control process for protein fiber manufacturing and provides further insights into the link between the supramolecular organization and mechanical functionality of protein fibers.

Diverse silk and silk-like proteins derived from terrestrial and marine organisms and their applications

Organisms develop unique systems in a given environment. In the process of adaptation, they employ materials in a clever way, which has inspired mankind extensively. Understanding the behavior and material properties of living organisms provides a way to emulate these natural systems and engineer various materials. Silk is a material that has been with human for over 5000 years, and the success of mass production of silkworm silk has realized its applications to medical, pharmaceutical, optical, and even electronic fields. Spider silk, which was characterized later, has expanded the application sectors to textile and military materials based on its tough mechanical properties. Because silk proteins are main components of these materials and there are abundant creatures producing silks that have not been studied, the introduction of new silk proteins would be a breakthrough of engineering materials to open innovative industry fields. Therefore, in this review, we present diverse silk and silk-like proteins and how they are utilized with respect to organism's survival. Here, the range of organisms are not constrained to silkworms and spiders but expanded to other insects, and even marine creatures which produce silk-like proteins that are not observed in terrestrial silks. This viewpoint broadening of silk and silk-like proteins would suggest diverse targets of engineering to design promising silk-based materials. STATEMENT OF SIGNIFICANCE: Silk has been developed as a biomedical material due to unique mechanical and chemical properties. For decades, silks from various silkworm and spider species have been intensively studied. More recently, other silk and silk-like proteins with different sequences and structures have been reported, not only limited to terrestrial organisms (honeybee, green lacewing, caddisfly, and ant), but also from marine creatures (mussel, squid, sea anemone, and pearl oyster). Nevertheless, there has hardly been well-organized literature on silks from such organisms. Regarding the relationship among sequence-structure-properties, this review addresses how silks have been utilized with respect to organism's survival. Finally, this information aims to improve the understanding of diverse silk and silk-like proteins which can offer a significant interest to engineering fields.

Phototherapy and optical waveguides for the treatment of infection

With rapid emergence of multi-drug resistant microbes, it is imperative to seek alternative means for infection control. Optical waveguides are an auspicious delivery method for precise administration of phototherapy. Studies have shown that phototherapy is promising in fighting against a myriad of infectious pathogens (i.e. viruses, bacteria, fungi, and protozoa) including biofilm-forming species and drug-resistant strains while evading treatment resistance. When administered via optical waveguides, phototherapy can treat both superficial and deep-tissue infections while minimizing off-site effects that afflict conventional phototherapy and pharmacotherapy. Despite great therapeutic potential, exact mechanisms, materials, and fabrication designs to optimize this promising treatment option are underexplored. This review outlines principles and applications of phototherapy and optical waveguides for infection control. Research advances, challenges, and outlook regarding this delivery system are rigorously discussed in a hope to inspire future developments of optical waveguide-mediated phototherapy for the management of infection and beyond.

Biocompatible and Biodegradable Polymer Optical Fiber for Biomedical Application: A Review

This article discusses recent advances in biocompatible and biodegradable polymer optical fiber (POF) for medical applications. First, the POF material and its optical properties are summarized. Then, several common optical fiber fabrication methods are thoroughly discussed. Following that, clinical applications of biocompatible and biodegradable POFs are discussed, including optogenetics, biosensing, drug delivery, and neural recording. Following that, biomedical applications expanded the specific functionalization of the material or fiber design. Different research or clinical applications necessitate the use of different equipment to achieve the desired results. Finally, the difficulty of implanting flexible fiber varies with its flexibility. We present our article in a clear and logical manner that will be useful to researchers seeking a broad perspective on the proposed topic. Overall, the content provides a comprehensive overview of biocompatible and biodegradable POFs, including previous breakthroughs, as well as recent advancements. Biodegradable optical fibers have numerous applications, opening up new avenues in biomedicine.

Methylcellulose-Cellulose Nanocrystal Composites for Optomechanically Tunable Hydrogels and Fibers

Chemical modification of cellulose offers routes for structurally and functionally diverse biopolymer derivatives for numerous industrial applications. Among cellulose derivatives, cellulose ethers have found extensive use, such as emulsifiers, in food industries and biotechnology. Methylcellulose, one of the simplest cellulose derivatives, has been utilized for biomedical, construction materials and cell culture applications. Its improved water solubility, thermoresponsive gelation, and the ability to act as a matrix for various dopants also offer routes for cellulose-based functional materials. There has been a renewed interest in understanding the structural, mechanical, and optical properties of methylcellulose and its composites. This review focuses on the recent development in optically and mechanically tunable hydrogels derived from methylcellulose and methylcellulose-cellulose nanocrystal composites. We further discuss the application of the gels for preparing highly ductile and strong fibers. Finally, the emerging application of methylcellulose-based fibers as optical fibers and their application potentials are discussed.

Photonic Nanojet Modulation Achieved by a Spider-Silk-Based Metal–Dielectric Dome Microlens

The photonic nanojet is a non-resonance focusing phenomenon with high intensity and narrow spot that can serve as a powerful biosensor for in vivo detection of red blood cells, micro-organisms, and tumor cells in blood. In this study, we first demonstrated photonic nanojet modulation by utilizing a spider-silk-based metal–dielectric dome microlens. A cellar spider was employed in extracting the silk fiber, which possesses a liquid-collecting ability to form a dielectric dome microlens. The metal casing on the surface of the dielectric dome was coated by using a glancing angle deposition technique. Due to the nature of surface plasmon polaritons, the characteristics of photonic nanojets are strongly modulated by different metal casings. Numerical and experimental results showed that the intensity of the photonic nanojet was increased by a factor of three for the gold-coated dome microlens due to surface plasmon resonance. The spider-silk-based metal-dielectric dome microlens could be used to scan a biological target for large-area imaging with a conventional optical microscope.

Luminescent Gold Nanocluster-Methylcellulose Composite Optical Fibers with Low Attenuation Coefficient and High Photostability

Because of their lightweight structure, flexibility, and immunity to electromagnetic interference, polymer optical fibers (POFs) are used in numerous short-distance applications. Notably, the incorporation of luminescent nanomaterials in POFs offers optical amplification and sensing for advanced nanophotonics. However, conventional POFs suffer from nonsustainable components and processes. Furthermore, the traditionally used luminescent nanomaterials undergo photobleaching, oxidation, and they can be cytotoxic. Therefore, biopolymer-based optical fibers containing nontoxic luminescent nanomaterials are needed, with efficient and environmentally acceptable extrusion methods. Here, such an approach for fibers wet-spun from aqueous methylcellulose (MC) dispersions under ambient conditions is demonstrated. Further, the addition of either luminescent gold nanoclusters, rod-like cellulose nanocrystals or gold nanocluster-cellulose nanocrystal hybrids into the MC matrix furnishes strong and ductile composite fibers. Using cutback attenuation measurement, it is shown that the resulting fibers can act as short-distance optical fibers with a propagation loss as low as 1.47 dB cm^-1 . The optical performance is on par with or even better than some of the previously reported biopolymeric optical fibers. The combination of excellent mechanical properties (Young's modulus and maximum strain values up to 8.4 GPa and 52%, respectively), low attenuation coefficient, and high photostability makes the MC-based composite fibers excellent candidates for multifunctional optical fibers and sensors.

Conductive In Situ Reduced Graphene Oxide-Silk Fibroin Bionanocomposites

This research paper describes the fabrication of bionanocomposites (BNCs) based on silk fibroin (SF) and reduced graphene oxide (rGO). The recorded UV-visible (UV-vis) spectra of the sample confirm the reduction of GO to rGO in SF by showing a plasmon resonance band within the wavelength range of 261-268 nm. The X-ray diffraction (XRD) peak at 11.6° corresponding to the GO intensity decreases with increasing reaction time, resulting in rGO in the SF host matrix. The morphological behavior of the SF-rGO BNCs is scrutinized using scanning electron microscopy (SEM), and the images clearly indicate the existence of rGO within the matrix. The increasing amount of GO in the SF shows broken graphene sheets, which can increase the surface roughness and establish a strong physical contact between the SF and rGO nanosheets. The high-resolution transmission electron microscope (HR-TEM) image of the bionanocomposite showed that the formed rGO encompassments of fewer layers are stacked, each with fewer wrinkles and folding. The Raman spectroscopy confirmed the formation of rGO by showing the increased intensity ratio of D to G band (I D/I G) in the bionanocomposite samples. The rGO effect on the electrical conductivity is measured, and the results show that DC conductivity increases from 1.28 × 10-9 to 82.4 × 10-9 S/cm with an increase in the GO content in the SF biopolymer. The investigations demonstrate loss of the insulation property and improved conducting behavior of the SF biopolymer.

Upconversion Nanoparticle Decorated Spider Silks as Single-Cell Thermometers

Noninvasive and sensitive thermometry of a single living cell is crucial to the analysis of fundamental cellular processes and applications to cancer diagnosis. Optical fibers decorated with temperature-sensitive nanomaterials have become widely used instruments for biosensing temperature. However, current silica fibers exhibit low compatibility and degradability in biosystems. In this work, we employ spider silks as natural optical fibers to construct biocompatible thermometers. The spider silks were drawn directly from Araneus ventricosus and were decorated with core-shell upconversion nanoparticles (UCNPs) via a photophoretic effect. By measuring the fluorescence spectra of the UCNPs on the spider silks, the membrane temperature of a single breast cancer cell was obtained with absolute and relative sensitivities ranging from 3.3 to 4.5 × 10^-3 K^-1 and 0.2 to 0.8% K^-1, respectively. Additionally, the temperature variation during apoptosis was monitored by the thermometer in real time. This work provides a biocompatible tool for precise biosensing and single-cell analysis.

Printed Soft Optical Waveguides of PLA Copolymers for Guiding Light into Tissue

The application of optical technologies in treating pathologies and monitoring disease states requires the development of soft, minimal invasive and implantable devices to deliver light to tissues inside the body. Here, we present soft and degradable optical waveguides from poly(d,l-lactide) and derived copolymers fabricated by extrusion printing in the desired dimensions and shapes. The obtained optical waveguides propagate VIS to NIR light in air and in tissue at penetration depths of tens of centimeters. Besides, the printed waveguides have elastomeric properties at body temperature and show softness and flexibility in the range relevant for implantable devices in soft organs. Printed waveguides were able to guide light across 8 cm tissue and activate photocleavage chemical reactions in a photoresponsive hydrogel (in vitro). The simplicity and flexibility of the fiber processing method and the optical and mechanical performance of the obtained waveguides exemplify how rational study of medically approved biomaterials can lead to useful inks for printing cost-effective and flexible optical components for potential use in medical contexts.

Interplay between Light and Functionalized Silk Fibroin and Applications

Silkworm silk has been considered to be a luxurious textile for more than five thousand years. Native silk fibroin (SF) films have excellent (ca. 90%) optical transparency and exhibit fluorescence under UV light. The silk dyeing process is very important and difficult, and methods such as pigmentary coloration and structural coloration have been tested for coloring silk fabrics. To functionalize silk that exhibits fluorescence, the in vivo and in vitro assembly of functional compounds with SF and the resulting amplification of fluorescence emission are examined. Finally, we discuss the applications of SF materials in basic optical elements, light energy conversion devices, photochemical reactions, sensing, and imaging. This review is expected to provide insight into the interaction between light and silk and to inspire researchers to develop silk materials with a consideration of history, material properties, and future prospects.

Chemical Synthesis of Silk-Mimetic Polymers

Silk is a naturally occurring high-performance material that can surpass man-made polymers in toughness and strength. The remarkable mechanical properties of silk result from the primary sequence of silk fibroin, which bears semblance to a linear segmented copolymer with alternating rigid ("crystalline") and flexible ("amorphous") blocks. Silk-mimetic polymers are therefore of great emerging interest, as they can potentially exhibit the advantageous features of natural silk while possessing synthetic flexibility as well as non-natural compositions. This review describes the relationships between primary sequence and material properties in natural silk fibroin and furthermore discusses chemical approaches towards the synthesis of silk-mimetic polymers. In particular, step-growth polymerization, controlled radical polymerization, and copolymerization with naturally derived silk fibroin are presented as strategies for synthesizing silk-mimetic polymers with varying molecular weights and degrees of sequence control. Strategies for improving macromolecular solubility during polymerization are also highlighted. Lastly, the relationships between synthetic approach, supramolecular structure, and bulk material properties are explored in this review, with the aim of providing an informative perspective on the challenges facing chemical synthesis of silk-mimetic polymers with desirable properties.

Silkworms as a factory of functional wearable energy storage fabrics

Feeding Bombyx mori larvae with chemically-modified diets affects the structure and properties of the resulted silk. Herein, we provide a road map for the use of silkworms as a factory to produce semiconducting/metallic natural silk that can be used in many technological applications such as supercapacitor electrodes. The silkworms were fed with four different types of chemicals; carbon material (graphite), sulfide (MoS2), oxide (TiO2 nanotubes), and a mixture of reactive chemicals (KMnO4/MnCl2). All the fed materials were successfully integrated into the resulted silk. The capacitive performance of the resulted silk was evaluated as self-standing fabric electrodes as well as on glassy carbon substrates. The self-standing silk and the silk@glassy carbon substrate showed a great enhancement in the capacitive performance over that of the unmodified counterparts. The specific capacitance of the self-standing blank silk negative and positive electrodes was enhanced 4 and 5 folds at 10 mV/s, respectively upon the modification with KMnO4/MnCl2 compared to that of the plain silk electrodes.

Soft and Stretchable Polymeric Optical Waveguide-Based Sensors for Wearable and Biomedical Applications

The past decades have witnessed the rapid development in soft, stretchable, and biocompatible devices for applications in biomedical monitoring, personal healthcare, and human-machine interfaces. In particular, the design of soft devices in optics has attracted tremendous interests attributed to their distinct advantages such as inherent electrical safety, high stability in long-term operation, potential to be miniaturized, and free of electromagnetic interferences. As the alternatives to conventional rigid optical waveguides, considerable efforts have been made to develop light-guiding devices by using various transparent and elastic polymers, which offer desired physiomechanical properties and enable wearable/implantable applications in optical sensing, diagnostics, and therapy. Here, we review recent progress in soft and stretchable optical waveguides and sensors, including advanced structural design, fabrication strategies, and functionalities. Furthermore, the potential applications of those optical devices for various wearable and biomedical applications are discussed. It is expected that the newly emerged soft and stretchable optical technologies will provide a safe and reliable alternative to next-generation, smart wearables and healthcare devices.

Spider silk colour covaries with thermal properties but not protein structure

Understanding how and why animal secretions vary in property has important biomimetic implications as desirable properties might covary. Spider major ampullate (MA) silk, for instance, is a secretion earmarked for biomimetic applications, but many of its properties vary among and between species across environments. Here, we tested the hypothesis that MA silk colour, protein structure and thermal properties covary when protein uptake is manipulated in the spider Trichonephila plumipes. We collected silk from adult female spiders maintained on a protein-fed or protein-deprived diet. Based on spectrophotometric quantifications, we classified half the silks as 'bee visible' and the other half 'bee invisible'. Wide angle X-ray diffraction and differential scanning calorimetry were then used to assess the silk's protein structure and thermal properties, respectively. We found that although protein structures and thermal properties varied across our treatments only the thermal properties covaried with colour. This ultimately suggests that protein structure alone is not responsible for MA silk thermal properties, nor does it affect silk colours. We speculate that similar ecological factors act on silk colour and thermal properties, which should be uncovered to inform biomimetic programmes.

Interacting Metal-Insulator-Metal Resonator by Nanoporous Silver and Silk Protein Nanomembranes and Its Water-Sensing Application

Planar and lithography-free metal-insulator-metal (MIM) resonators based on the Fabry-Pérot etalon are attractive for biochemical sensing applications because of their acceptable optical performance and cost-effectiveness. However, injecting analytes into the insulating layer where the optical field is localized (high light-matter interaction) is difficult. Here, planar and lithography-free MIM resonators interacting with their environment are reported. In the MIM, molecules of a liquid can infiltrate the inherent nanopores in the deposited silver nanomembrane and be absorbed into the silk protein hydrogel membrane. The silk layer is swollen when water molecules are absorbed, inducing a large shift in the resonance wavelength. Thus, in this study, the proposed MIM resonator was applied as a highly sensitive water sensor, and a water content as low as 0.008% in organic solvents could be determined by reading the shift in the transmission peak. This limit can be lowered further by using a high-resolution spectrometer and a thicker silk layer. In addition, the area of interaction can be artificially selected by applying an elastomer stamp and a patterned photoresist window.

Programmable Vanishing Multifunctional Optics

Physically transient optics, a form of optics that can physically disappear with precisely controlled degradation behaviors, has widespread applications including information security, drug release, and degradable implants. Here, a set of silk-based programmable vanishing, biologically functional, multichromatic diffractive optical elements (MC-DOEs) is reported. Silk proteins produced by silkworms and spiders are mechanically robust, biocompatible, biodegradable, and importantly, optically transparent, which open up new opportunities for a set of fully degradable transient optical devices with no need of metallic or semiconductor components. Compared with monochromatic DOEs, MC-DOEs carry out richer information for more practical applications such as encryption and decryption of multilevel information, quantitative sensing/monitoring of chemical/biological cascade reactions, and effective treatment of infections caused by multiple pathogens.

Formation of high-quality photonic nanojets by decorating spider silk

The photonic nanojet is a highly concentrated beam with low divergence on the shadow side of dielectric microparticles. In this Letter, we first theoretically and experimentally investigate the formation of high-quality photonic nanojets by decorating spider silk. The dragline silks are directly extracted from cellar spiders and capable of efficiently collecting ultraviolet cure adhesive. The liquid-collecting capacity of the captured silk is the result of a singular fiber structure with periodic spindle knots. Using a scanning-optical-microscope system, we show that high-quality photonic nanojets are generated by silk fiber with spindle knots. With the variation in spindle-knot dimensions, the properties of photonic nanojets, such as intensity distribution, focal length, and full width at half-maximum, are able to tune flexibly. By combining the unique biocompatibility, flexibility, and tensile strength, the silk filaments with spindle knots pave a potential way for original bio-photonic applications.

Light-Guiding Biomaterials for Biomedical Applications

Optical techniques used in medical diagnosis, surgery, and therapy require efficient and flexible delivery of light from light sources to target tissues. While this need is currently fulfilled by glass and plastic optical fibers, recent emergence of biointegrated approaches, such as optogenetics and implanted devices, call for novel waveguides with certain biophysical and biocompatible properties and desirable shapes beyond what the conventional optical fibers can offer. To this end, exploratory efforts have begun to harness various transparent biomaterials to develop waveguides that can serve existing applications better and enable new applications in future photomedicine. Here, we review the recent progress in this new area of research for developing biomaterial-based optical waveguides. We begin with a survey of biological light-guiding structures found in plants and animals, a source of inspiration for biomaterial photonics engineering. We describe natural and synthetic polymers and hydrogels that offer appropriate optical properties, biocompatibility, biodegradability, and mechanical flexibility have been exploited for light-guiding applications. Finally, we briefly discuss perspectives on biomedical applications that may benefit from the unique properties and functionalities of light-guiding biomaterials.

Distinctive Stress-Stiffening Responses of Regenerated Silk Fibroin Protein Polymers under Nanoscale Gap Geometries: Effect of Shear on Silk Fibroin-Based Materials

Interfacial dynamics, assembly processes, and changes in nanostructures and mechanical properties of Bombyx mori silk fibroin (SF) proteins under varying degrees of nanoconfinement without and with lateral shear are investigated. When only compressive confinement forces were applied, SF proteins adsorbed on the surfaces experienced conformational changes following the Alexander-de Gennes theory of polymer brushes. By contrast, when SF proteins were exposed to a simultaneous nanoconfinement and shear, remarkable changes in interaction forces were observed, displaying the second order phase transitions, which are attributed to the formation of SF micelles and globular superstructural aggregates via hierarchical assembly processes. The resultant nanostructured SF aggregates show several folds greater elastic moduli than those of SF films prepared by drop-casting and compression-only and even degummed SF fibers. Such a striking improvement in mechanical strength is ascribed to a directional organization of β-sheet nanocrystals, effectively driven by nanoconfinement and shear stress-induced stiffing and ordering mechanisms.

Anderson light localization in biological nanostructures of native silk

Light in biological media is known as freely diffusing because interference is negligible. Here, we show Anderson light localization in quasi-two-dimensional protein nanostructures produced by silkworms (Bombyx mori). For transmission channels in native silk, the light flux is governed by a few localized modes. Relative spatial fluctuations in transmission quantities are proximal to the Anderson regime. The sizes of passive cavities (smaller than a single fibre) and the statistics of modes (decomposed from excitation at the gain–loss equilibrium) differentiate silk from other diffusive structures sharing microscopic morphological similarity. Because the strong reflectivity from Anderson localization is combined with the high emissivity of the biomolecules in infra-red radiation, silk radiates heat more than it absorbs for passive cooling. This collective evidence explains how a silkworm designs a nanoarchitectured optical window of resonant tunnelling in the physically closed structures, while suppressing most of transmission in the visible spectrum and emitting thermal radiation.

Light in biological media is known as freely diffusing because interference is negligible. Here, the authors demonstrate Anderson localization of light from quasi-two-dimensional nanostructures in silk fibres.

The Investigation of the Waveguiding Properties of Silk Fibroin from the Visible to Near-Infrared Spectrum

Silk fibroin protein has been reinvented as a new optical material for biophotonic applications because of its optical transparency, biocompatibility, and easy fabrication process. It is used in various silk-based optical devices, which makes it desirable to investigate the optical properties of silk from diverse perspectives. This paper presents our investigation of the optical properties of silk fibroin, extracted from Bombyx mori cocoons. We have measured transmission spectra from the visible to near-infrared region and investigated waveguiding properties by the prism-coupling technique for five wavelengths (473.0, 632.8, 964.0, 1311, and 1552 nm). From the measurements, we determined the values of refractive indices. The measurements also proved waveguiding properties for all of the wavelengths. Optical scattering losses were measured by the fiber probe technique at 632.8 nm and were estimated to be 0.22 dB·cm⁻¹.

Progress and Opportunities in Soft Photonics and Biologically Inspired Optics

Optical components made fully or partially from reconfigurable, stimuli-responsive, soft solids or fluids-collectively referred to as soft photonics-are poised to form the platform for tunable optical devices with unprecedented functionality and performance characteristics. Currently, however, soft solid and fluid material systems still represent an underutilized class of materials in the optical engineers' toolbox. This is in part due to challenges in fabrication, integration, and structural control on the nano- and microscale associated with the application of soft components in optics. These challenges might be addressed with the help of a resourceful ally: nature. Organisms from many different phyla have evolved an impressive arsenal of light manipulation strategies that rely on the ability to generate and dynamically reconfigure hierarchically structured, complex optical material designs, often involving soft or fluid components. A comprehensive understanding of design concepts, structure formation principles, material integration, and control mechanisms employed in biological photonic systems will allow this study to challenge current paradigms in optical technology. This review provides an overview of recent developments in the fields of soft photonics and biologically inspired optics, emphasizes the ties between the two fields, and outlines future opportunities that result from advancements in soft and bioinspired photonics.

Towards the use of bioresorbable fibers in time-domain diffuse optics

In the last years bioresorbable materials are gaining increasing interest for building implantable optical components for medical devices. In this work we show the fabrication of bioresorbable optical fibers designed for diffuse optics applications, featuring large core diameter (up to 200 μm) and numerical aperture (0.17) to maximize the collection efficiency of diffused light. We demonstrate the suitability of bioresorbable fibers for time-domain diffuse optical spectroscopy firstly checking the intrinsic performances of the setup by acquiring the instrument response function. We then validate on phantoms the use of bioresorbable fibers by applying the MEDPHOT protocol to assess the performance of the system in measuring optical properties (namely, absorption and scattering coefficients) of homogeneous media. Further, we show an ex-vivo validation on a chicken breast by measuring the absorption and scattering spectra in the 500-1100 nm range using interstitially inserted bioresorbable fibers. This work represents a step toward a new way to look inside the body using optical fibers that can be implanted in patients. These fibers could be useful either for diagnostic (e. g. for monitoring the evolution after surgical interventions) or treatment (e. g. photodynamic therapy) purposes. Picture: Microscopy image of the 100 μm core bioresorbable fiber.

Bio-Optics and Bio-Inspired Optical Materials

Through the use of the limited materials palette, optimally designed micro- and nanostructures, and tightly regulated processes, nature demonstrates exquisite control of light-matter interactions at various length scales. In fact, control of light-matter interactions is an important element in the evolutionary arms race and has led to highly engineered optical materials and systems. In this review, we present a detailed summary of various optical effects found in nature with a particular emphasis on the materials and optical design aspects responsible for their optical functionality. Using several representative examples, we discuss various optical phenomena, including absorption and transparency, diffraction, interference, reflection and antireflection, scattering, light harvesting, wave guiding and lensing, camouflage, and bioluminescence, that are responsible for the unique optical properties of materials and structures found in nature and biology. Great strides in understanding the design principles adapted by nature have led to a tremendous progress in realizing biomimetic and bioinspired optical materials and photonic devices. We discuss the various micro- and nanofabrication techniques that have been employed for realizing advanced biomimetic optical structures.

Synthetic Engineering of Spider Silk Fiber as Implantable Optical Waveguides for Low-Loss Light Guiding

A variety of devices used for biomedical engineering have been fabricated using protein polymer because of their excellent properties, such as strength, toughness, biocompatibility, and biodegradability. In this study, we fabricated an optical waveguide using genetically engineered spider silk protein. This method has two significant advantages: (1) recombinant spider silk optical waveguide exhibits excellent optical and biological properties and (2) biosynthesis of spider silk protein can overcome the limitation to the research on spider silk optical waveguide due to the low yield of natural spider silk. In detail, two kinds of protein-based optical waveguides made from recombinant spider silk protein and regenerative silkworm silk protein were successfully prepared. Results suggested that the recombinant spider silk optical waveguide showed a smoother surface and a higher refractive index when compared with regenerative silkworm silk protein. The optical loss of recombinant spider silk optical waveguide was 0.8 ± 0.1 dB/cm in air and 1.9 ± 0.3 dB/cm in mouse muscles, which were significantly lower than those of regenerative silkworm silk optical waveguide. Moreover, recombinant spider silk optical waveguide can meet the demand to guide and efficiently deliver light through biological tissue. In addition, recombinant spider silk optical waveguide showed low toxicity to cells in vitro and low-level inflammatory reaction with surrounding tissue in vivo. Therefore, recombinant spider silk optical waveguide is a promising implantable device to guide and deliver light with low loss.

Silk: Optical Properties over 12.6 Octaves THz-IR-Visible-UV Range

Domestic (Bombyx mori) and wild (Antheraea pernyi) silk fibers were characterised over a wide spectral range from THz 8 cm -1 ( λ = 1.25 mm, f = 0.24 THz) to deep-UV 50 × 10 3 cm - 1 ( λ = 200 nm, f = 1500 THz) wavelengths or over a 12.6 octave frequency range. Spectral features at β-sheet, α-coil and amorphous fibroin were analysed at different spectral ranges. Single fiber cross sections at mid-IR were used to determine spatial distribution of different silk constituents and revealed an α-coil rich core and more broadly spread β-sheets in natural silk fibers obtained from wild Antheraea pernyi moths. Low energy T-ray bands at 243 and 229 cm -1 were observed in crystalline fibers of domestic and wild silk fibers, respectively, and showed no spectral shift down to 78 K temperature. A distinct 20±4 cm-1 band was observed in the crystalline Antheraea pernyi silk fibers. Systematic analysis and assignment of the observed spectral bands is presented. Water solubility and biodegradability of silk, required for bio-medical and sensor applications, are directly inferred from specific spectral bands.

New insights and perspectives into biological materials for flexible electronics

Materials based on biological materials are becoming increasingly competitive and are likely to be critical components in flexible electronic devices.

A pair of novel Zn(ii) enantiomeric coordination polymers based on a chiral multicarboxylate ligand: synthesis, crystal structures and molecular recognition properties

A pair of Zn(ii) enantiomeric coordination polymers, 1-R and 1-S, were synthesized via solvothermal reactions, exhibiting luminescence recognizing properties toward nitro aromatic compounds and ferric cations.

3D Printing of Hierarchical Silk Fibroin Structures

Like many other natural materials, silk is hierarchically structured from the amino acid level up to the cocoon or spider web macroscopic structures. Despite being used industrially in a number of applications, hierarchically structured silk fibroin objects with a similar degree of architectural control as in natural structures have not been produced yet due to limitations in fabrication processes. In a combined top-down and bottom-up approach, we exploit the freedom in macroscopic design offered by 3D printing and the template-guided assembly of ink building blocks at the meso- and nanolevel to fabricate hierarchical silk porous materials with unprecedented structural control. Pores with tunable sizes in the range 40-350 μm are generated by adding sacrificial organic microparticles as templates to a silk fibroin-based ink. Commercially available wax particles or monodisperse polycaprolactone made by microfluidics can be used as microparticle templates. Since closed pores are generated after template removal, an ultrasonication treatment can optionally be used to achieve open porosity. Such pore templating particles can be further modified with nanoparticles to create a hierarchical template that results in porous structures with a defined nanotopography on the pore walls. The hierarchically porous silk structures obtained with this processing technique can potentially be utilized in various application fields from structural materials to thermal insulation to tissue engineering scaffolds.

Antibiotic free selection for the high level biosynthesis of a silk-elastin-like protein

Silk-elastin-like proteins (SELPs) are a family of genetically engineered recombinant protein polymers exhibiting mechanical and biological properties suited for a wide range of applications in the biomedicine and materials fields. They are being explored as the next generation of biomaterials but low productivities and use of antibiotics during production undermine their economic viability and safety. We have developed an industrially relevant, scalable, fed-batch process for the high level production of a novel SELP in E. coli in which the commonly used antibiotic selection marker of the expression vector is exchanged for a post segregational suicide system, the separate-component-stabilisation system (SCS). SCS significantly augments SELP productivity but also enhances the product safety profile and reduces process costs by eliminating the use of antibiotics. Plasmid content increased following induction but no significant differences in plasmid levels were discerned when using SCS or the antibiotic selection markers under the controlled fed-batch conditions employed. It is suggested that the absence of competing plasmid-free cells improves host cell viability and enables increased productivity with SCS. With the process developed, 12.8 g L⁻¹ purified SELP was obtained, this is the highest SELP productivity reported to date and clearly demonstrates the commercial viability of these promising polymers.