Self-repairing polymers: poly(dioxaborolane)s containing trigonal planar boron

Tuning the Mechanical and Dynamic Properties of Elastic Vitrimers by Tailoring the Substituents of Boronic Ester

Elastic vitrimers, i.e., elastic polymers with associative dynamic covalent bonds, can afford elastomers with recyclability while maintaining their thermal and chemical stability. Herein, we report a series of boronic ester-based vitrimers with tunable mechanical properties and recyclability by varying the substitute groups of boronic acid in polymer networks. The dynamic polymer networks are formed by reacting diol-containing tetra-arm poly(amidoamine) with boronic acid-terminated tetra-arm poly(ethylene glycol), which possesses different substituents adjacent to boronic acid moieties. Varying the substituent adjacent to the boronic ester unit will significantly affect the binding strength of the boronic ester, therefore affecting their dynamics and mechanical performance. The electron-withdrawing substituents noticeably suppress the dynamics of boronic ester exchange and increase the activation energy and relaxation time while enhancing the mechanical strength of the resulting elastic vitrimers. On the other hand, the presence of electron-rich substituent affords relatively reduced glass transition temperature (Tg), faster relaxation, and prominent recyclability and malleability at lower temperatures. The developed pathway will guide the rational design of elastomers with well-tunable dynamics and processabilities.

Recycling of Thermoset Materials and Thermoset-Based Composites: Challenge and Opportunity

Thermoset materials and their composites are characterized by a long life cycle with their main applications in aircrafts, wind turbines and constructions as insulating materials. Considering the importance of recovery and valorization of these materials at their end-of-life, avoiding landfilling, the interest concerning their recycling grows continuously. The thermoset materials and their composites, to be successfully recovered and valorized, must degrade their three-dimensional structures and recover the mono-oligomers and/or fillers. The thermoset materials could successfully degrade through thermal treatment at different temperatures (for example, above 1000 °C for incineration, ca. 500 °C for oxidation/combustion of organic constituents, etc.), chemical degradation by catalyst, irradiation with or without the presence of water, alcohol, etc., and mechanical recycling, obtaining fine particles that are useful as filler and/or reinforcement additives. Among these recycling methods, this mini-review focuses on the formulation and recovery method of innovative thermoset with in-build recyclability, i.e., materials having chemical links that could be degraded on-demand or containing dynamic covalent bonds to have re-processable and/or recyclable thermoset. This issue could be considered the future perspective in developing novel thermoset materials. The aim of this review is to get an overview of the state of the art in thermoset recycling and of the most commonly used thermoset composites, recovering valuable reinforcing fibers. Additionally, in this work, we also report not only known recycling routes for thermoset and thermoset-based composites, but also new and novel formulating strategies for producing thermosets with built-in recyclability, i.e., containing chemical-triggered on-demand links. This mini-review is also a valuable guide for educational purposes for students and specialized technicians in polymer production and recycling.

Degradable polyprodrugs: design and therapeutic efficiency

Prodrugs are developed to increase the therapeutic properties of drugs and reduce their side effects. Polyprodrugs emerged as highly efficient prodrugs produced by the polymerization of one or several drug monomers. Polyprodrugs can be gradually degraded to release therapeutic agents. The complete degradation of polyprodrugs is an important factor to guarantee the successful disposal of the drug delivery system from the body. The degradation of polyprodrugs and release rate of the drugs can be controlled by the type of covalent bonds linking the monomer drug units in the polymer structure. Therefore, various types of polyprodrugs have been developed based on polyesters, polyanhydrides, polycarbonates, polyurethanes, polyamides, polyketals, polymetallodrugs, polyphosphazenes, and polyimines. Furthermore, the presence of stimuli-responsive groups, such as redox-responsive linkages (disulfide, boronate ester, metal-complex, and oxalate), pH-responsive linkages (ester, imine, hydrazone, acetal, orthoester, P-O and P-N), light-responsive (metal-complex, o-nitrophenyl groups) and enzyme-responsive linkages (ester, peptides) allow for a selective degradation of the polymer backbone in targeted tumors. We envision that new strategies providing a more efficient synergistic therapy will be developed by combining polyprodrugs with gene delivery segments and targeting moieties.

Exchangeable Liquid Crystalline Elastomers and Their Applications

This Review presents and discusses the current state of the art in "exchangeable liquid crystalline elastomers", that is, LCE materials utilizing dynamically cross-linked networks capable of reprocessing, reprogramming, and recycling. The focus here is on the chemistry and the specific reaction mechanisms that enable the dynamic bond exchange, of which there is a variety. We compare and contrast these different chemical mechanisms and the key properties of their resulting elastomers. In the conclusion, we discuss the most promising applications that are enabled by dynamic cross-linking and present a summary table: a library of currently available materials and their main characteristics.

Boronic Acid Esters and Anhydrates as Dynamic Cross-Links in Vitrimers

Growing environmental awareness imposes on polymer scientists the development of novel materials that show a longer lifetime and that can be easily recycled. These challenges were largely met by vitrimers, a new class of polymers that merges properties of thermoplastics and thermosets. This is achieved by the incorporation of dynamic covalent bonds into the polymer structure, which provides high stability at the service temperature, but enables the processing at elevated temperatures. Numerous types of dynamic covalent bonds have been utilized for the synthesis of vitrimers. Amongst them, boronic acid-based linkages, namely boronic acid esters and boroxines, are distinguished by their quick exchange kinetics and the possibility of easy application in various polymer systems, from commercial thermoplastics to low molecular weight thermosetting resins. This review covers the development of dynamic cross-links. This review is aimed at providing the state of the art in the utilization of boronic species for the synthesis of covalent adaptable networks. We mainly focus on the synthetic aspects of boronic linkages-based vitrimers construction. Finally, the challenges and future perspectives are provided.

Basic Approaches to the Design of Intrinsic Self-Healing Polymers for Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) as a revolutionary system for harvesting mechanical energy have demonstrated high vitality and great advantage, which open up great prospects for their application in various areas of the society of the future. The past few years have seen exponential growth in many new classes of self-healing polymers (SHPs) for TENGs. This review presents and evaluates the SHP range for TENGs, and also attempts to assess the impact of modern polymer chemistry on the development of advanced materials for TENGs. Among the most widely used SHPs for TENGs, the analysis of non-covalent (hydrogen bond, metal-ligand bond), covalent (imine bond, disulfide bond, borate bond) and multiple bond-based SHPs in TENGs has been performed. Particular attention is paid to the use of SHPs with shape memory as components of TENGs. Finally, the problems and prospects for the development of SHPs for TENGs are outlined.

Discrete boronate ester ladders from the dynamic covalent self-assembly of oligo(phenylene ethynylene) derivatives and phenylenebis(boronic acid)

Reversible boronate ester chemistry enables the controlled, dynamic self-assembly of olig(phenylene ethynylene)s into highly conjugated ladder frameworks.

Charge reversal and swelling in saccharide binding polyzwitterionic phenylboronic acid-modified poly(4-vinylpyridine) nanoparticles

We present the synthesis and characterization of zwitterionic poly(4-vinylpyridine) nanoparticles quaternized with phenylboronic acid (QxPVP-PBA) whose size and surface charge can be tuned by varying the saccharide and the degree of quaternization.

Cyclosiloxane polymer bearing dynamic boronic acid: synthesis and bottom-up nanocoating

Boronic acid-containing polycyclosiloxane showed unique self-assembly nanofilm formation (6 nm film thickness) on various substrates and provided film-based metal ion sensor capability through dynamic covalent bonding.

Liquid/Liquid Interfacial Synthesis of a Click Nanosheet

A liquid/liquid interfacial synthesis is employed, for the first time, to synthesize a covalent two-dimensional polymer nanosheet. Copper-catalyzed azide-alkyne cycloaddition (CuAAC) between a three-way terminal alkyne and azide at a water/dichloromethane interface generates a 1,2,3-triazole-linked nanosheet. The resultant nanosheet, with a flat and smooth texture, has a maximum domain size of 20 μm and minimum thickness of 5.3 nm. The starting monomers in the organic phase and the copper catalyst in the aqueous phase can only meet at the liquid/liquid interface as a two-dimensional reaction space; this allows them to form the two-dimensional polymer. The robust triazole linkage generated by irreversible covalent-bond formation allows the nanosheet to resist hydrolysis under both acidic and alkaline conditions, and to endure pyrolysis up to more than 300 °C. The coordination ability of the triazolyl group enables the nanosheet to act as a reservoir for metal ions, with an affinity order of Pd²⁺ >Au³⁺ >Cu²⁺ .

Self-Healing Materials for Ecotribology

Hydroxypropyl methylcellulose (HPMC) is a biopolymer that is biodegradable, environmentally friendly, and bio-friendly. Owing to its unique chemical structure, HPMC can reduce the coefficient of friction (COF) and frictional wear and thus possesses excellent lubrication properties. HPMC has good dissolvability in specific solvents. The present research focuses on the reversible dissolution reaction subsequent to the film formation of HPMC, with a view to the healing and lubrication properties of thin films. Raman spectroscopy was used to test the film-forming properties of HPMC and the dissolution characteristics of various solvents. In this study, the solvents were water, methanol, ethanol, and acetone. The results showed that the HPMC film had the highest dissolvability in water. The ball-on-disk wear test was used to analyze the lubrication properties of HPMC, and the results showed that HPMC had the same COF and lubrication properties as the original film after being subjected to the water healing treatment. The HPMC film can be reused, recycled, and refilled, making it an ideal lubricant for next-generation ecotribology.

Dynamic covalent polymers

This Highlight presents an overview of the rapidly growing field of dynamic covalent polymers. This class of polymers combines intrinsic reversibility with the robustness of covalent bonds, thus enabling formation of mechanically stable, polymer-based materials that are responsive to external stimuli. It will be discussed how the inherent dynamic nature of the dynamic covalent bonds on the molecular level can be translated to the macroscopic level of the polymer, giving access to a range of applications, such as stimuli-responsive or self-healing materials. A primary distinction will be made based on the type of dynamic covalent bond employed, while a secondary distinction will be based on the consideration whether the dynamic covalent bond is used in the main chain of the polymer or whether it is used to allow side chain modification of the polymer. Emphasis will be on the chemistry of the dynamic covalent bonds present in the polymer, in particular in relation to how the specific (dynamic) features of the bond impart functionality to the polymer material, and to the conditions under which this dynamic behavior is manifested. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 3551-3577.

Spectroscopic and Computational Investigations of The Thermodynamics of Boronate Ester and Diazaborole Self-Assembly

The solution phase self-assembly of boronate esters, diazaboroles, oxathiaboroles, and dithiaboroles from the condensation of arylboronic acids with aromatic diol, diamine, hydroxythiol, and dithiol compounds in chloroform has been investigated by (1)H NMR spectroscopy and computational methods. Six arylboronic acids were included in the investigations with each boronic acid varying in the substituent at its 4-position. Both computational and experimental results show that the para-substituent of the arylboronic acid does not significantly influence the favorability of forming a condensation product with a given organic donor. The type of donor, however, greatly influences the favorability of self-assembly. (1)H NMR spectroscopy indicates that condensation reactions between arylboronic acids and catechol to give boronate esters are the most favored thermodynamically, followed by diazaborole formation. Computational investigations support this conclusion. Neither oxathiaboroles nor dithiaboroles form spontaneously at equilibrium in chloroform at room temperature. Computational results suggest that the effect of borylation on the frontier orbitals of each donor helps to explain differences in the favorability of their condensation reactions with arylboronic acids. The results can inform the use of boronic acids as they are increasingly utilized in the dynamic self-assembly of organic materials and as components in dynamic combinatorial libraries.

Porous polyurethanes based on hyperbranched amino ethers of boric acid

Novel polyurethanes with hierarchical supramolecular structure were synthesized via polyaddition reaction of amino ethers of boric acid and polyisocyanate.

Hierarchical supramolecules and organization using boronic acid building blocks

Current progress on hierarchical supramolecules using boronic acids has been highlighted in this feature article. The feasibility of the structure-directing ability is fully discussed from the standpoint of the generation of new smart materials.

Fluorescent boronic acid polymer grafted on silica particles for affinity separation of saccharides

Boronic acid affinity gels are important for effective separation of biological active cis-diols, and are finding applications both in biotech industry and in biomedical research areas. To increase the efficacy of boronate affinity separation, it is interesting to introduce repeating boronic acid units in flexible polymer chains attached on solid materials. In this work, we synthesize polymer brushes containing boronic acid repeating units on silica gels using surface-initiated atom transfer radical polymerization (ATRP). A fluorescent boronic acid monomer is first prepared from an azide-tagged fluorogenic boronic acid and an alkyne-containing acrylate by Cu(I)-catalyzed 1,3-dipolar cycloaddition reaction (the CuAAC click chemistry). The boronic acid monomer is then grafted to the surface of silica gel modified with an ATRP initiator. The obtained composite material contains boronic acid polymer brushes on surface and shows favorable saccharide binding capability under physiological pH conditions, and displays interesting fluorescence intensity change upon binding fructose and glucose. In addition to saccharide binding, the flexible polymer brushes on silica also enable fast separation of a model glycoprotein based on selective boronate affinity interaction. The synthetic approach and the composite functional material developed in this work should open new opportunities for high efficiency detection, separation, and analysis of not only simple saccharides, but also glycopeptides and large glycoproteins.

A spiroborate-based anionic bis-N-heterocyclic carbene

A twisted bis-benzimidazolium salt was isolated from the reaction of 5,6-dihydroxyl-benzimidazolium and benzenediboronic acid. Deprotonation of the azolium salt led to the formation of a spiroborate-linked bis-NHC, which was further transformed into the corresponding diborane adduct and the di-Rh complex.

Intramolecular interactions in ortho-methoxyalkylphenylboronic acids and their catechol esters

Catechol esters of ortho-methoxyalkylphenylboronic acids have been synthesized and characterized by (17)O NMR spectroscopy. The results were compared with the data for the parent acids. The influence of intramolecular and intermolecular hydrogen bonds on the properties of the boronic acids has been discussed. The (17)O NMR data for the boronic esters proved that there are no O → B interactions in the investigated compounds. This fact is connected with weak Lewis acidity of the parent acids and their low sugars' receptors activity. Crystal structure of ortho-methoxyphenylboronic acid catechol ester was determined.

Glucose-Sensitivity of Boronic Acid Block Copolymers at Physiological pH

Well-defined boronic acid block copolymers were demonstrated to exhibit glucose-responsive disassembly at physiological pH. A boronic acid-containing acrylamide monomer with an electron-withdrawing substituent on the pendant phenylboronic acid moiety was polymerized by reversible addition-fragmentation chain transfer (RAFT) polymerization to yield a polymer with a boronic acid pK_a = 8.2. Below this value, a block copolymer of this monomer with poly(N,N-dimethylacrylamide) self-assembled into aggregates. Addition of base to yield a pH > pK_a or addition of glucose at pH = 7.4 resulted in aggregate dissociation that may prove promising for controlled delivery applications under physiological relevant conditions.