Photoresponsive molecular wires of FeII triazole complexes in organic media and light-induced morphological transformations

Controlled self-organization of cyanostilbene: emission tuning and photo-responsiveness

Cyanostilbene modified with dimethylaniline (CMD) could self-assemble into vesicles and fibrous morphologies depending on the solvophobic properties. Furthermore, morphology of well-defined nanostructures could be changed with enhanced emission triggered by the photo-isomerization of cyanostilbene. The present system has potential for building luminescent color conversion materials.

MPTTF-containing tripeptide-based organogels: receptor for 2,4,6-trinitrophenol and multiple stimuli-responsive properties

A series of monopyrrolotetrathiafulvalene-tripeptide conjugates have been synthesized and investigated as new low-molecular mass organogelators. It was found that most of these compounds could immobilize low-polarity solvents readily and the gelation behaviors of these gelators showed a dependence on the amino acid residues. These organogels were thoroughly studied using various techniques including atomic force microscopy (AFM), field-emission scanning electron microscopy (FE-SEM), circular dichroism (CD) spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, (1)H NMR spectroscopy, UV-Vis absorption spectroscopy and X-ray diffraction (XRD). The results showed that the cooperative interplay of hydrogen bonding, π-π stacking and SS interactions were the main driving force for the formation of the gels. Of all the organogels, the aromatic solvent gels, such as toluene gel, exhibited multiple-stimulus responsiveness towards heating, shaking, chemical redox activity and the presence of anions, thus leading to reversible sol-gel phase transitions. Most interestingly, gelation in the presence of 2,4,6-trinitrophenol (TNP) in organic solvents could be observed visually with a concomitant color change through donor-acceptor interactions. The strength of the charge-transfer interaction between gelators and TNP was proportional to the incubation time and increasing critical gelation concentration (CGC). The gels could function as efficient absorbents for potential application in removal of crystal violet and rhodamine B dyes from water.

Photoresponsive gelators

We review the different approaches that have been used to form low molecular weight gels that respond to light.

Modifying a known gelator scaffold for nitrite detection

The process of selecting and modifying a known gelator scaffold to develop a new nitrite-based sensor is described. Five new azo-sulfonate gelators were discovered and characterized. The most promising scaffold exhibits a stable diazonium intermediate, proceeds in a high yield, and gels nitrite-spiked tap, river, and pond water.

Photoinduced macroscopic morphological transformation of an amphiphilic diarylethene assembly: reversible dynamic motion

Self-assembled microstructures of an amphiphilic diarylethene featuring an alkyl chain and triethylene glycol groups showed a photoinduced reversible morphological change in water. Reversible photoisomerization of the core diarylethene gave rise to a reversible morphological transformation between colorless microspheres and colored fibers. When colorless microspheres were irradiated with UV light, colored fibers were formed, and when the colored fibers were irradiated with visible light, the spheres were restored to their original positions where the spheres originally existed. This system showed reversible morphological change through not only photoirradiation but also temperature change. These behaviors can be interpreted as a phase transition between the sphere and fiber states. The dynamic process of the phase transition was monitored by polarized optical microscopy (POM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). It was revealed that the formation of fibers upon UV irradiation occurred radially at the surface of the sphere and the formation of the spheres upon visible-light irradiation occurred at the middle of the fiber. The unique photoinduced mechanical motion provides useful information for the design of sophisticated photoactuators.

A Cu2+ specific metallohydrogel: preparation, multi-responsiveness and pillar[5]arene-induced morphology transformation

A Cu²⁺ specific metallohydrogel was constructed from a terpyridine-based low molecular weight ligand. The metallohydrogel showed multi-responsiveness and its morphology could be transformed by pillararene-based host–guest interaction.

A liquid azobenzene derivative as a solvent-free solar thermal fuel

A liquid solar thermal fuel is developed; a low-molecular weight liquid trans-azobenzene derivative shows facile photoisomerization to the higher-energy cis-isomer in neat condition so that a high volumetric energy density is achieved. Shear viscosity measurements for each isomer liquid unveiled transitions from non-Newtonian to Newtonian fluids.

Photochemically reversible liquefaction and solidification of multiazobenzene sugar-alcohol derivatives and application to reworkable adhesives

Multiazobenzene compounds, hexakis-O-[4-(phenylazo)phenoxyalkylcarboxyl]-D-mannitols and hexakis-O-[4-(4-hexylphenylazo)phenoxyalkylcarboxyl]-D-mannitols, exhibit photochemically reversible liquefaction and solidification at room temperature. Their photochemical and thermal phase transitions were investigated in detail through thermal analysis, absorption spectroscopy, and dynamic viscoelasticity measurements, and were compared with those of other sugar-alcohol derivatives. Tensile shear strength tests were performed to determine the adhesions of the compounds sandwiched between two glass slides to determine whether the compounds were suitable for application as adhesives. The adhesions were varied by alternately irradiating the compounds with ultraviolet and visible light to photoinduce phase transitions. The azobenzene hexyl tails, lengths of the methylene spacers, and differences in the sugar-alcohol structures affected the photoresponsive properties of the compounds.

Multistimuli responsive organogels based on a reactive azobenzene gelator

A reactive azobenzene based super organogelator was found to rapidly and reversibly transform a range of hydrophobic solvents from gels to solutions upon changes in temperature, light and shear force. More specifically they formed gels at concentrations as low as 0.08 wt%. Upon heating, exposure to UV light, or application of shear, the π-π bonding was disrupted which resulted in a rapid drop of both modulus and viscosity. This was confirmed by (1)H NMR, SAXS, and rheological measurements. Although many examples of organogelators are known in the literature, this is the first time that a reactive group, a benzoyl chloride, has been incorporated in a supramolecular organogel structure. Moreover, this group is available for subsequent synthetic modifications. The presence of benzoyl chloride groups showed a remarkable effect on the formation and properties of the gels. Compared with other approaches, this strategy is advantageous in terms of structural design since it not only produces a multi-responsive soft material but also allows facile modifications which may expand the applications of organogels to other fields.

A highly selective, Hg2+ triggered hydrogelation: modulation of morphology by chemical stimuli

The morphology of a supramolecular hydrogel based on 4′-[4-(4-aminophenyl)phenyl]-2,2′:6′,2′′-terpyridine, exclusively with Hg²⁺, can be tuned by external chemical stimuli.

Photoisomerization-induced gel-to-sol transition and concomitant fluorescence switching in a transparent supramolecular gel of a cyanostilbene derivative

The light-induced trans-to-cis isomerization of a cyanostilbene moiety in a transparent gel triggers the gel-to-sol transition and fluorescence color switching.

Controlled polymerization and self-assembly of halogen-bridged diruthenium complexes in organic media and their dielectrophoretic alignment

Lipophilic paddlewheel biruthenium complexes [Ru(2)(μ-O(2)CR)(3)X](n) (O(2)CR = 3,4,5-tridodecyloxybenzoate, X = Cl, I) self-assemble in organic media to form halogen-bridged coordination polymers. The polymerization is accompanied by spectral changes in π(RuO,Ru(2)) → π*(Ru(2)) and π(axial ligand) → π*(Ru(2)) absorption bands. These polymeric complexes form lyotropic liquid crystals in n-decane at concentrations above ~100 unit mM. The bridging halogen axial ligands (X = Cl or I) exert significant influences on their electronic structures and self-assembling characteristics: the chloride-bridged polymers give hexagonally aligned ordered columnar structure (columnar hexagonal phase, Col(h)), whereas the iodide-bridged polymers form less ordered columnar nematic (Col(n)) phase, as revealed by small-angle X-ray diffraction measurements. Chloro-bridged coordination polymers dispersed in n-decane are thermally intact even at the elevated temperature of 70 °C. In contrast, iodo-bridged polymers show reversible dissociation and reassembly phenomena depending on temperature. These halogen-bridged coordination polymers show unidirectional alignment upon applying alternating current (ac) electric field as investigated by crossed polarizing optical microscopy and scanning electron microscopy. The unidirectionally oriented columns of chloro-bridged polymers are accumulated upon repetitive application of the ac voltage, whereas iodo-bridged coordination polymers show faster and reversible alignment changes in response to turning on-and-off the electric field. The controlled self-assembly of electronically conjugated linear complexes provide a potential platform to design electric field-responsive nanomaterials.

Supramolecular hydrogels based on short peptides linked with conformational switch

Short peptides appropriately linked with an azobenzene conformational switch were found to be motif and pH dependant supramolecular hydrogelators. The hydrogelation properties of the short peptides linked with the conformational switch were studied in detail with respect to dependence on amino acid residue, pH and salt effect. The presence of amino acids with aromatic side chains such as Phe and Tyr was found to be favorable for the short peptides to gel water at an appropriate pH range. Cationic amino acid residues such as Arg and Lys in the short peptides were found to be unfavorable for hydrogelation. pH and salt effect were also found to be important factors for the hydrogelation properties of the short peptides. A series of short peptides with bioactive sequences were linked with the conformational switch and their hydrogelation properties were investigated. Photoresponsive supramolecular hydrogels were realized based on the E-/Z- transition of the conformational switch upon light irradiation. Proper combination of amino acid residues in the short peptides resulted in smart supramolecular hydrogels with responses to multiple stimuli.

Facile reversible UV-controlled and fast transition from emulsion to gel by using a photoresponsive polymer with a malachite green group

In this paper we describe the facile reversible UV-controlled and fast transition from emulsion to gel by using a photoresponsive polymer with a malachite green group. The photoresponsive polymer with the hydrophobic malachite green group can be used for the formation of an oil-in-water emulsion. However, upon UV irradiation of 5 min, the photochromic malachite green group could be ionized to its corresponding cation, leading to the transformation from emulsion to gel. Upon shaking, such gel can recover the emulsion state, and further UV irradiation can turn the emulsion into gel again. Such transition from emulsion to gel by photochemical reaction and reverse shaking treatment can be repeated several times. It is anticipated greatly that this line of research may provide new insight into the mechanism behind stimuli-responsive systems, facilitating the design and synthesis of new responsive molecules for the fabrication of stimuli-responsive materials with designed functions.

Self-assembly of two-component gels: stoichiometric control and component selection

Two-component systems capable of self-assembling into soft gel-phase materials are of considerable interest due to their tunability and versatility. This paper investigates two-component gels based on a combination of a L-lysine-based dendron and a rigid diamine spacer (1,4-diaminobenzene or 1,4-diaminocyclohexane). The networked gelator was investigated using thermal measurements, circular dichroism, NMR spectroscopy and small angle neutron scattering (SANS) giving insight into the macroscopic properties, nanostructure and molecular-scale organisation. Surprisingly, all of these techniques confirmed that irrespective of the molar ratio of the components employed, the "solid-like" gel network always consisted of a 1:1 mixture of dendron/diamine. Additionally, the gel network was able to tolerate a significant excess of diamine in the "liquid-like" phase before being disrupted. In the light of this observation, we investigated the ability of the gel network structure to evolve from mixtures of different aromatic diamines present in excess. We found that these two-component gels assembled in a component-selective manner, with the dendron preferentially recognising 1,4-diaminobenzene (>70 %), when similar competitor diamines (1,2- and 1,3-diaminobenzene) are present. Furthermore, NMR relaxation measurements demonstrated that the gel based on 1,4-diaminobenzene was better able to form a selective ternary complex with pyrene than the gel based on 1,4-diaminocyclohexane, indicative of controlled and selective pi-pi interactions within a three-component assembly. As such, the results in this paper demonstrate how component selection processes in two-component gel systems can control hierarchical self-assembly.

Rapid and reversible gel-sol transition of self-assembled gels induced by photoisomerization of dendritic azobenzenes

An asymmetric bis-dendritic gelator (1) consisting of an azobenzene dendron and an aliphatic amide dendron was synthesized to achieve a photoresponsive self-assembly. The compound gelled in a wide range of organic solvents, even at concentrations as low as 0.02% (w/v) in cyclohexane. The self-assembled fibrillar network structure was confirmed by field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and X-ray diffraction (XRD) analyses. The rapid and reversible gel-sol transition by irradiation with UV and visible light was investigated by UV-vis and Fourier transform infrared (FT-IR) spectroscopy, FE-SEM, and XRD analyses. Upon irradiation of the gel with UV, trans-to-cis isomerization of the azobenzene groups occurred, and the gel turned into a sol state. The gel was recovered immediately by the reverse cis-to-trans isomerization after the exposure to visible light. The trans-to-cis isomerization of the azobenzenes disrupted the hydrogen bonding of azobenzene amide groups, together with the hydrogen bonding in the aliphatic amide dendron. This facile communication between the two amide dendrons leads to the dissociation of the gel fibers and collapse of the gel.

Di-μ-chlorido-bis-{aqua-chlorido[3-ethyl-4-phenyl-5-(2-pyrid-yl)-4H-1,2,4-triazole-κN,N]manganese(II)}

In the centrosymmetric dinuclear title compound, [Mn₂Cl₄(C₁₅H₁₄N₄)₂(H₂O)₂], the Mn^II atom is coordinated by an N,N′-bidentate ligand, a water mol­ecule, a terminal chloride ion and two bridging chloride ions in a distorted MnN₂OCl₃ octa­hedral geometry. The Mn⋯Mn separation is 3.6563 (9) Å. In the crystal structure, O—H⋯N and O—H⋯Cl hydrogen bonds help to establish the packing.