Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Recent advances in metal sulfide nanoparticle-added bionanocomposite films for food packaging applications

Metal sulfide nanoparticles have recently attracted much attention due to their unique physical and functional properties. Metal sulfide nanoparticles used as optoelectronic and biomedical materials in the past decades are promising for making functional nanocomposite films due to their low toxicity and strong antibacterial activity. Recently, copper sulfide and zinc sulfide nanomaterials have been used to produce food packaging films for active packaging. Metal sulfide nanoparticles added as nanofillers are attracting attention in packaging applications due to their excellent potential to improve mechanical, barrier properties, and antibacterial activity. This review covers the fabrication process and important applications of metal sulfide nanoparticles. The development of metal sulfides reinforcing mainly copper sulfide and zinc sulfide nanomaterials as multifunctional nanofillers in bio-based films for active packaging applications has been comprehensively reviewed. As the recognition of metal sulfide nanoparticles as a functional filler increases, the development and application potential of active packaging films using them is expected to increase.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Binary Cu2-xS Templates Direct the Formation of Quaternary Cu2ZnSnS4 (Kesterite, Wurtzite) Nanocrystals

Kesterite Cu₂ZnSnS₄ (k-CZTS) nanocrystals have received attention for their tunable optoelectronic properties, as well as the earth abundance of their constituent atoms. However, the phase-pure synthesis of these quaternary NCs is challenging due to their polymorphism, as well as the undesired formation of related binary and ternary impurities. A general synthetic route to tackle this complexity is to pass through intermediate template nanocrystals that direct subsequent cation exchange toward the desired quaternary crystalline phase, particularly those that are thermodynamically disfavored or otherwise synthetically challenging. Here, working within this model multinary system, we achieve control over the formation of three binary copper sulfide polymorphs, cubic digenite (Cu_1.8S), hexagonal covellite (CuS), and monoclinic djurleite (Cu_1.94S). Controlled experiments with Cu⁰ seeds show that selected binary phases can be favored by the identity and stoichiometry of the sulfur precursor alone under otherwise comparable reaction conditions. We then demonstrate that the nature of the Cu_2-xS template dictates the final polymorph of the CZTS nanocrystal products. Through digenite, the cation exchange reaction readily yields the k-CZTS phase due to its highly similar anion sublattice. Covellite nanocrystals template the k-CZTS phase but via major structural rearrangement to digenite that requires elevated temperatures in the absence of a strong reducing agent. In contrast, we show that independently synthesized djurleite nanorods template the formation of the wurtzite polymorph (w-CZTS) but with prominent stacking faults in the final product. Applying this refined understanding to the standard one-pot syntheses of k- and w-CZTS nanocrystals, we identify that these reactions are each effectively templated by binary intermediates formed in situ, harnessing their properties to guide the overall synthesis of phase-pure quaternary materials. Our results provide tools for the careful development of tailored nanocrystal syntheses in complex polymorphic systems.

The Effect of the Deposition Method on the Structural and Optical Properties of ZnS Thin Films

ZnS is a wide band gap material which was proposed as a possible candidate to replace CdS as a buffer layer in solar cells. However, the structural and optical properties are influenced by the deposition method. ZnS thin films were prepared using magnetron sputtering (MS), pulsed laser deposition (PLD), and a combined deposition technique that uses the same bulk target for sputtering and PLD at the same time, named MSPLD. The compositional, structural, and optical properties of the as-deposited and annealed films were inferred from Rutherford backscattering spectrometry, X-ray diffraction, X-ray reflectometry, Raman spectroscopy, and spectroscopic ellipsometry. PLD leads to the best stoichiometric transfer from target to substrate, MS makes fully amorphous films, whereas MSPLD facilitates obtaining the densest films. The study reveals that the band gap is only slightly influenced by the deposition method, or by annealing, which is encouraging for photovoltaic applications. However, sulphur vacancies contribute to lowering the bandgap and therefore should be controlled. Moreover, the results add valuable information towards the understanding of ZnS polymorphism. The combined MSPLD method offers several advantages such as an increased deposition rate and the possibility to tune the optical properties of the obtained thin films.

Synthesis, X-ray Single-Crystal Structural Characterization, and Thermal Analysis of Bis(O-alkylxanthato)Cd(II) and Bis(O-alkylxanthato)Zn(II) Complexes Used as Precursors for Cadmium and Zinc Sulfide Thin Films

This work investigates tuning of the molecular structure of a series of O-alkylxanthato zinc and cadmium precursor complexes to enhance production of ZnS and CdS materials. The structures of several bis(O-alkylxanthato) cadmium(II) complexes (8-13) and bis(O-alkyl xanthato)zinc(II) complexes (18 and 19) are reported based on single crystal X-ray diffraction data. CdS and ZnS films were produced by the spin-coating of these metal complexes followed by their thermal decomposition to the corresponding metal sulfides. Thin films of CdS were deposited by spin-coating the bis(O-alkylxanthato) cadmium(II) precursors (7-13) on glass substrates, followed by annealing at 300 °C for 60 min. Thin films of ZnS were deposited by spin-coating bis(O-alkylxanthato) zinc(II) (14-20), followed by annealing at 200 °C for 60 min. The molecular complexes and solid state materials are characterized using a range of techniques including single-crystal X-ray diffraction, pXRD, EDS and XPS, DSC and TGA, UV-vis and PL spectroscopies, and electron microscopy. These techniques provided information on the influence of alkyl chain length on the thermal conditions required to fabricate metal sulfide films as well as film properties such as film quality, and morphology. For example, the obtained crystallite size of metal sulfide films formed is correlated to the hydrocarbon chain length of xanthate ligands in the precursor. The behavior of the complexes under thermal stress was therefore studied in detail. DTA and TGA profiles explain the relationship between hydrocarbon chain length, decomposition temperatures, and the energies required for decomposition. A higher decomposition temperature for complexes with longer hydrocarbon chains is observed compared to complexes with shorter hydrocarbon chains. Band-gap energies calculated from the optical absorption spectra alongside steady state and time-resolved photoluminescence studies are reported for CdS films.

Effect of electron-phonon interaction and valence band edge shift for carrier-type reversal in layered ZnS/rGO nanocomposites

The artificial stacking of nanohybrid films helps to enhance their properties and thus intrigues researchers to explore this possibility in emerging technologies. The layer-by-layer approach was used to fabricate samples of zinc sulfide/reduced graphene oxide (ZnS/rGO) by using spin coating technique. The structure and optoelectronic properties has been extensively studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV-VIS-NIR spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and Hall measurements. Raman spectrum elucidates the phonon contribution of ZnS and breathing mode of κ-point phonons and sp² bonds of carbon atoms of rGO. The electron-phonon interactions reveal reduction in electron mobility and enhancement in holes contribution with rGO content leading to surface charge transfer doping (SCTD). XPS results explain the valence band edge and conduction band edge to form type-I band alignment to reconfirm carrier-type reversal. A change in the dispersion of refractive indices along with a small rise in the value of absorption coefficient in terahertz (THz) region for ZnS/rGO nanocomposite films has been observed. These results will open up new opportunities to furthering the science of this technologically important class of materials for future electronics.

Emergence and Control of Stacking Fault Formation during Nanoparticle Cation Exchange Reactions

Cation exchange reactions modify the composition of a nanocrystal while retaining other features, including the crystal structure and morphology. In many cases, the anion sublattice is considered to be locked in place as cations rapidly shuttle in and out. Here we provide evidence that the anion sublattice can shift significantly during nanocrystal cation exchange reactions. When the Cu⁺ cations of roxbyite Cu_1.8S nanorods exchange with Zn²⁺ to form ZnS nanorods, a high density of stacking faults emerges. During cation exchange, the stacking sequence of the close-packed anion sublattice shifts at many locations to generate a nanorod product containing a mixture of wurtzite, zincblende, and a wurtzite/zincblende polytype that contains an ordered arrangement of stacking faults. The reagent concentration and reaction temperature, which control the cation exchange rate, serve as synthetic levers that can tune the stacking fault density from high to low, which is important because once introduced, the stacking faults could not be modified through thermal annealing. This level of synthetic control through nanocrystal cation exchange is important for controlling properties that depend on the presence and density of stacking faults.

Nanowire Waveguides and Lasers: Advances and Opportunities in Photonic Circuits

Due to their single-crystalline structures, comparatively large aspect ratios, tight optical confinement and smooth surfaces, nanowires have increasingly attracted research interests for both fundamental studies and technological applications in on-chip photonic devices. This class of nanostructures typically have cross-sections of 2~200 nm and lengths upwards of several micrometers, allowing for the bridging of the nanoscopic and macroscopic world. In particular, the lasing behaviors can be established from a nanowire resonator with positive feedback via end-facet reflection, making the nanowire a promising candidate in the next generation of optoelectronics. Consequently, versatile nanowire-based devices ranging from nanoscale coherent lasers, optical sensors, waveguides, optical switching, and photonic networks have been proposed and experimentally demonstrated in the past decade. In this article, significant progresses in the nanowire fabrication, lasers, circuits, and devices are reviewed. First, we focus on the achievements of nanowire synthesis and introduce the basics of nanowire optics. Following the cavity configurations and mode categories, then the different light sources consisting of nanowires are presented. Next, we review the recent progress and current status of functional nanowire devices. Finally, we offer our perspective of nanowires regarding their challenges and future opportunities in photonic circuits.

Synthesis and characterization of zinc di(O-2,2-dimethylpentan-3-yl dithiocarbonates) bearing pyridine or tetramethylethylenediamine coligands and investigation of their thermal conversion mechanisms towards nanocrystalline zinc sulfide

Metal xanthates are versatile single source precursors for the preparation of various metal sulfides. In this study, we present the synthesis of the two novel zinc xanthate complexes bis(O-2,2-dimethylpentan-3-yl-dithiocarbonato)(N,N,N',N'-tetramethylethylenediamine)zinc(ii) and bis(O-2,2-dimethylpentan-3-yl-dithiocarbonato)(pyridine)zinc(ii). A thorough investigation of these compounds revealed distinct differences in their structural and thermal properties. While in the complex containing the chelating tetramethylethylenediamine, the xanthate groups coordinate in a monodentate way, they are bidentally coordinated to the zinc atom in the pyridine containing complex. Both compounds show a two-step thermal decomposition with an onset temperature of 151 °C and 156 °C for the tetramethylethylenediamine and pyridine containing complex, respectively. Moreover, different mechanisms are revealed for the two phases of the decomposition based on high resolution mass spectrometry investigations. By the thermal conversion process nanocrystalline zinc sulfide is produced and the coligand significantly influences its primary crystallite size, which is 4.4 nm using the tetramethylethylenediamine and 11.4 nm using the pyridine containing complex for samples prepared at a temperature of 400 °C.

The Role of Polarity in Nonplanar Semiconductor Nanostructures

The lack of mirror symmetry in binary semiconductor compounds turns them into polar materials, where two opposite orientations of the same crystallographic direction are possible. Interestingly, their physical properties (e.g., electronic or photonic) and morphological features (e.g., shape, growth direction, and so forth) also strongly depend on the polarity. It has been observed that nanoscale materials tend to grow with a specific polarity, which can eventually be reversed for very specific growth conditions. In addition, polar-directed growth affects the defect density and topology and might induce eventually the formation of undesirable polarity inversion domains in the nanostructure, which in turn will affect the photonic and electronic final device performance. Here, we present a review on the polarity-driven growth mechanism at the nanoscale, combining our latest investigation with an overview of the available literature highlighting suitable future possibilities of polarity engineering of semiconductor nanostructures. The present study has been extended over a wide range of semiconductor compounds, covering the most commonly synthesized III-V (GaN, GaP, GaAs, GaSb, InN, InP, InAs, InSb) and II-VI (ZnO, ZnTe, CdS, CdSe, CdTe) nanowires and other free-standing nanostructures (tripods, tetrapods, belts, and membranes). This systematic study allowed us to explore the parameters that may induce polarity-dependent and polarity-driven growth mechanisms, as well as the polarity-related consequences on the physical properties of the nanostructures.

Synthesis, properties and applications of semiconductor nanostructured zinc sulfide

Experimental results obtained in recent years on the synthesis, structure and properties of nanostructured zinc sulfide are summarized and analyzed. The crystal polymorphs of zinc sulfide and methods for the synthesis of zinc sulfide as quantum dots, nanospheres, doped nanoparticles, thin films and heteronanostructures with different morphology are described. The attention is focused on the emission and semiconductor properties of the title compound. The potential applications of zinc sulfide-based nanostructures are considered.

The bibliography includes 194 references.

A Raman spectral probe on polar w-ZnS nanostructures and surface optical phonon modes in nanowires

In the present study, different morphologies of ZnS nanostructures have been synthesized through a hydrothermal method and their Raman spectral modes are investigated. Raman scattering from surface optical (SO) modes has been seen and identified as a strange shoulder band of LO at 340 cm-1 in nanowires (NWs) with a hexagonal wurtzite structure of ZnS in air medium. X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques have been used to confirm the hexagonal phase and the modulation in the surface during the growth process, which causes the translational symmetry breaking to activate the SO mode. The appearance of a strong SO mode in NWs has been obviously confirmed by the frequency downshift of the SO mode in different dielectric media with dielectric constants ranging from 1 to 2.56. The SO phonon mode shift due to the roughness in the NW faces has been estimated from the wave-vector that activates the SO mode and an approximate dielectric continuum (DC) model has been used to understand the SO modes in NWs. The surface perturbation responsible for the activation of the SO mode has been estimated and is compared with the surface modulation along the growth axis of the NW from the TEM images.

Exploring Au Droplet Motion in Nanowire Growth: A Simple Route toward Asymmetric GaP Morphologies

Here we show a new nanowire growth procedure, exploring the thermally activated motion of Au droplets on III-V surfaces. We show that by setting a single growth parameter we can activate the crawling motion of Au droplets in vacuum and locally modify surface composition in order to enhance vapor-solid (VS) growth along oxide-free areas on the trail of the metal particle. Asymmetric VS growth rates are comparable in magnitude to the vapor-liquid-solid growth, producing unconventional wurtzite GaP morphologies, which shows negligible defect density as well as optical signal in the green spectral region. Finally, we demonstrate that this effect can also be explored in different substrate compositions and orientations with the final shape finely tuned by group III flow and nanoparticle size. This distinct morphology for wurtzite GaP nanomaterials can be interesting for the design of nanophotonics devices.

The deposition of thin films of cadmium zinc sulfide Cd1-x Zn x S at 250 °C from spin-coated xanthato complexes: a potential route to window layers for photovoltaic cells

Thin films of Cd_1-x Zn _x S (CZS) were prepared by a novel spin coating/melt method from cadmium ethylxanthato [Cd(C₂H₅OCS₂)₂] and zinc ethylxanthato [Zn(C₂H₅OCS₂)₂] in x ratios of 0-0.15 and of 1. A solution of the precursor(s) in THF was spin coated onto a glass substrate and then heated at 250 °C for 1 h under N₂. The thickness of the film formed can be controlled by varying the solution composition and/or the spin rate of the coating. A total metal precursor solution concentration of 50 mM was used in all cases. The films were characterized by p-XRD, SEM, EDX, ICP-AES, XPS, UV-Vis absorption spectroscopy, Raman spectroscopy and resistivity measurements. The band gaps of the films were between 2.35-2.58 and 3.75 eV (0 ≤ x ≤ 0.15 and at x = 1). The resistivity of Cd_1-x Zn _x S films was found to vary linearly with zinc contents, and the properties of the films suggest potential application to photovoltaics as window layers. This work is the first study to demonstrate Cd_1-x Zn _x S thin films by a spin coating/melt method from xanthato precursors.

Direct Patterning of Zinc Sulfide on a Sub-10 Nanometer Scale via Electron Beam Lithography

Nanostructures of metal sulfides are conventionally prepared via chemical techniques and patterned using self-assembly. This poses a considerable amount of challenge when arbitrary shapes and sizes of nanostructures are desired to be placed at precise locations. Here, we describe an alternative approach of nanoscale patterning of zinc sulfide (ZnS) directly using a spin-coatable and electron beam sensitive zinc butylxanthate resist without the lift-off or etching step. Time-resolved electron beam damage studies using micro-Raman and micro-FTIR spectroscopies suggest that exposure to a beam of electrons leads to quick disappearance of xanthate moieties most likely via the Chugaev elimination, and further increase of electron dose results in the appearance of ZnS, thereby making the exposed resist insoluble in organic solvents. Formation of ZnS nanocrystals was confirmed by high-resolution transmission electron microscopy and selected area electron diffraction. This property was exploited for the fabrication of ZnS lines as small as 6 nm and also enabled patterning of 10 nm dots with pitches as close as 22 nm. The ZnS patterns fabricated by this technique showed defect-induced photoluminescence related to sub-band-gap optical transitions. This method offers an easy way to generate an ensemble of functional ZnS nanostructures that can be arbitrarily patterned and placed in a precise way. Such an approach may enable programmable design of functional chalcogenide nanostructures.

Sulfur ion concentration dependent morphological evolution of CdS thin films and its subsequent effect on photo-electrochemical performance

The sulfur ion concentration dependent morphological evolution and its subsequent effect on photo-electrochemical properties of chemically synthesized CdS thin films have been systematically investigated. The plausible growth mechanism for the morphological evolution of CdS thin films due to a change in sulfur ion concentration has been proposed. Scanning electron micrographs (SEMs) reveal that the morphology of CdS thin films has been changed from spherical grains to vertically aligned nanoflakes by systematic control of sulfur ion concentration. This article elucidates the astute relationships between precursor concentrations, reaction rate and morphological evolution. The X-ray diffraction (XRD) patterns reveal the formation of hexagonal wurtzite CdS thin films with the preferred (002) orientation for CdS nanoflakes, which is further supported by the analysis of the high resolution transmission electron micrographs (HRTEMs). Optical absorption studies show a red shift in the absorption edge with an increase in sulfur concentration. The beneficial role of nanoflake formation is easily reflected in the photo-electrochemical performance. Improved solar cell performances are observed for CdS nanoflakes grown with a sulfur to cadmium ion concentration ratio of 4 (S : Cd = 4).

CuGaS2-ZnS p-n nanoheterostructures: a promising visible light photo-catalyst for water-splitting hydrogen production

In this work, novel CuGaS₂-ZnS p-n type semiconductor nanoheterostructures were synthesized by a solution route, and demonstrated experimentally to be a very promising visible light active photo-catalyst for water-splitting hydrogen production. The construction of CuGaS₂-ZnS heterostructures follows a multi-step strategy, employing Cu_1.94S nanocrystals first as catalytic assistants for the hetero-growth of ZnS on their surfaces, and then as sacrificial seeds for the formation of CuGaS₂. Excitingly, attributed to the efficient charge separation introduced by the p-n heterojunctions, the hydrogen production ability of the CuGaS₂-ZnS nanoheterostructures under visible light irradiation is 15 times higher than that of the CuGaS₂ component, and comparable to that of the CdS nanophase which is currently regarded as one of the most active visible photo-catalysts for hydrogen generation.

Effect of isovalent dopants on photodegradation ability of ZnS nanoparticles

Isovalent (Mn, Cd, Cu, Co)-doped-ZnS nanoparticles having size vary in between 2 to 5nm are synthesized by co-precipitation route. Their photocatalytic activity for decoloration of Cango Red and Malachite Green dyes is tested in visible radiation under natural conditions. Structural and morphological features of the samples are investigated by X-ray diffraction, Raman spectroscopy, Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM) and UVVis spectrometer. Single phase zinc blende structure of as-synthesized undoped and doped-ZnS is confirmed by XRD and revealed by Rietveld fitting. SEM and TEM images show ultrafine nanoparticles having size in the range of 2 to 5nm. UV-Vis absorption spectra exhibit blue shift in absorption edge of undoped and doped ZnS as compared to bulk counterpart. The photocatalytic activity as a function of dopant concentration and irradiation time is systematically studied. The rate of de-coloration of dyes is detected by UVVis absorption spectroscopy and organic dye mineralization is confirmed by table of carbon (TOC) study. The photocatalytic activity of Mn-doped ZnS is highest amongst all dopants; however Co as a dopant is found to reduce photocatalytic activity than pure ZnS.

Recent developments of zinc oxide based photocatalyst in water treatment technology: A review

Today, a major issue about water pollution is the residual dyes from different sources (e.g., textile industries, paper and pulp industries, dye and dye intermediates industries, pharmaceutical industries, tannery and craft bleaching industries, etc.), and a wide variety of persistent organic pollutants have been introduced into our natural water resources or wastewater treatment systems. In fact, it is highly toxic and hazardous to the living organism; thus, the removal of these organic contaminants prior to discharge into the environment is essential. Varieties of techniques have been employed to degrade those organic contaminants and advanced heterogeneous photocatalysis involving zinc oxide (ZnO) photocatalyst appears to be one of the most promising technology. In recent years, ZnO photocatalyst have attracted much attention due to their extraordinary characteristics. The high efficiency of ZnO photocatalyst in heterogeneous photocatalysis reaction requires a suitable architecture that minimizes electron loss during excitation state and maximizes photon absorption. In order to further improve the immigration of photo-induced charge carriers during excitation state, considerable effort has to be exerted to further improve the heterogeneous photocatalysis under UV/visible/solar illumination. Lately, interesting and unique features of metal doping or binary oxide photocatalyst system have gained much attention and became favourite research matter among various groups of scientists. It was noted that the properties of this metal doping or binary oxide photocatalyst system primarily depend on the nature of the preparation method and the role of optimum dopants content incorporated into the ZnO photocatalyst. Therefore, this paper presents a critical review of recent achievements in the modification of ZnO photocatalyst for organic contaminants degradation.

The hydrothermal evolution of the phase and shape of ZnS nanostructures and their gas-sensing properties

The evolution of the phase of ZnS was achieved by adjusting the hydrothermal holding time or the dosage of the surfactant.

Fluorometric sensing of ultralow As(III) concentrations using Ag doped hollow CdS/ZnS bi-layer nanoparticles

Arsenic poisoning from drinking water has been an important global issue in recent years. Because of the high level toxicity of arsenic to human health, an easy, inexpensive, low level and highly selective detection technique is of great importance to take any early precautions. This study reports the synthesis of Ag doped hollow CdS/ZnS bi-layer (Ag-h-CdS/ZnS) nanoparticles for the easy fluorometric determination of As(iii) ions in the aqueous phase. The hollow bi-layer structures were synthesized by a sacrificial core method using AgBr as the sacrificial core and the core was removed by dissolution in an ammonium hydroxide solution. The synthesized nanoparticles were characterized using different instrumental techniques. A good linear relationship was obtained between fluorescence quenching intensity and As(iii) concentration in the range of 0.75-22.5 μg L(-1) at neutral pH with a limit of detection as low as 0.226 μg L(-1).

Gas Sensors Based on Metal Sulfide Zn(1-x)Cd(x)S Nanowires with Excellent Performance

Metal sulfide Zn1-xCdxS nanowires (NWs) covering the entire compositional range prepared by one step solvothermal method were used to fabricate gas sensors. This is the first time for ternary metal sulfide nanostructures to be used in the field of gas sensing. Surprisingly, the sensors based on Zn1-xCdxS nanowires were found to exhibit enhanced response to ethanol compared to those of binary CdS and ZnS NWs. Especially for the sensor based on the Zn1-xCdxS (x = 0.4) NWs, a large sensor response (s = 12.8) and a quick rise time (2 s) and recovery time (1 s) were observed at 206 °C toward 20 ppm ethanol, showing preferred selectivity. A dynamic equilibrium mechanism of oxygen molecules absorption process and carrier intensity change in the NWs was used to explain the higher response of Zn1-xCdxS. The reason for the much quicker response and recovery speed of the Zn1-xCdxS NWs than those of the binary ZnS NWs was also discussed. These results demonstrated that the growth of metal sulfide Zn1-xCdxS nanostructures can be utilized to develop gas sensors with high performance.

An Effective Electrical Throughput from PANI Supplement ZnS Nanorods and PDMS-Based Flexible Piezoelectric Nanogenerator for Power up Portable Electronic Devices: An Alternative of MWCNT Filler

We demonstrate the requirement of electrical poling can be avoided in flexible piezoelectric nanogenerators (FPNGs) made of low-temperature hydrothermally grown wurtzite zinc sulfide nanorods (ZnS-NRs) blended with polydimethylsiloxane (PDMS). It has been found that conductive fillers, such as polyaniline (PANI) and multiwall carbon nanotubes (MWCNTs), can subsequently improve the overall performance of FPNG. A large electrical throughput (open circuit voltage ∼35 V with power density ∼2.43 μW/cm(3)) from PANI supplement added nanogenerator (PZP-FPNG) indicates that it is an effective means to replace the MWCNTs filler. The time constant (τ) estimated from the transient response of the capacitor charging curves signifying that the FPNGs are very much capable to charge the capacitors in very short time span (e.g., 3 V is accomplished in 50 s) and thus expected to be perfectly suitable in portable, wearable and flexible electronics devices. We demonstrate that FPNG can instantly lit up several commercial Light Emitting Diodes (LEDs) (15 red, 25 green, and 55 blue, individually) and power up several portable electronic gadgets, for example, wrist watch, calculator, and LCD screen. Thus, a realization of potential use of PANI in low-temperature-synthesized ZnS-NRs comprising piezoelectric based nanogenerator fabrication is experimentally verified so as to acquire a potential impact in sustainable energy applications. Beside this, wireless piezoelectric signal detection possibility is also worked out where a concept of self-powered smart sensor is introduced.

A monolithic white laser

Monolithic semiconductor lasers capable of emitting over the full visible-colour spectrum have a wide range of important applications, such as solid-state lighting, full-colour displays, visible colour communications and multi-colour fluorescence sensing. The ultimate form of such a light source would be a monolithic white laser. However, realizing such a device has been challenging because of intrinsic difficulties in achieving epitaxial growth of the mismatched materials required for different colour emission. Here, we demonstrate a monolithic multi-segment semiconductor nanosheet based on a quaternary alloy of ZnCdSSe that simultaneously lases in the red, green and blue. This is made possible by a novel nanomaterial growth strategy that enables separate control of the composition, morphology and therefore bandgaps of the segments. Our nanolaser can be dynamically tuned to emit over the full visible-colour range, covering 70% more perceptible colours than the most commonly used illuminants.

Precise Determination of the Crystallographic Orientations in Single ZnS Nanowires by Second-Harmonic Generation Microscopy

We report on the systematical study of the second-harmonic generation (SHG) in single zinc sulfide nanowires (ZnS NWs). The high-quality ZnS NWs with round cross-section were fabricated by chemical vapor deposition method. The transmission electron microscopy images show that the actual growth axis has a deviation angle of 0°∼20° with the preferential growth direction [120], which leads to the various polarization-dependent SHG response patterns in different individual ZnS NWs. The SHG response is quite sensitive to the orientations of c axis as well as the (100) and (010) crystal-axis of ZnS NWs; thus, all the three crystal-axis orientations of ZnS NWs are precisely determined by the SHG method. A high SHG conversion efficiency of 7 × 10(-6) is obtained in single ZnS NWs, which shows potential applications in nanoscale ultraviolet light source, nonlinear optical microscopy, and nanophotonic devices.

Synthesis of silicate-bridged ZnO/g-C3N4 nanocomposites as efficient photocatalysts and its mechanism

The built silicate bridges are favorable for charge transfer and separation, which lead to the greatly enhanced photoactivities of ZnO/g-C₃N₄.

Single-source mediated facile electrosynthesis of p-Cu2S thin films on TCO (SnO2:F) with enhanced photocatalytic activities

Electrosynthesis of Cu₂S thin films on TCO using a single-source precursor, [Cu(mdpa)₂][CuCl₂]. Deposition of the thin films occurs with the optimization of precursor concentration.

Large area quantitative analysis of nanostructured thin-films

Proposed and verified method offers an unique quantitative large scale nanostructures' evaluation.

ZnS nanoparticles as an efficient recyclable heterogeneous catalyst for one-pot synthesis of 4-substituted-1,5-benzodiazepines

An efficient and novel method was developed for the synthesis of 4-substituted-1,5-benzodiazepine derivatives via a one-pot three-component catalytic reaction.

Self-powered pendulum and micro-force active sensors based on a ZnS nanogenerator

A pendulum and micro-force active sensors have been first made from zinc sulfur nanowires based nanogenerator. The ZnS nanogenerator can be self-powered to trace a simple harmonic motion of a pendulum that released from different angle. A various momentums from 0.077 N s to 0.177 N s were able to detect owing to the output voltage and current of the ZnS nanogenerator were proportional to the momentum.

Novel synthesis of C, N doped rice grain shaped ZnS nanomaterials – towards enhanced visible light photocatalytic activity for aqueous pollutant removal and H2 production

Novel synthesis of C, N doped rice grain shaped visible active ZnS nano photocatalysts. Enhanced activity for the pollutant removal and H₂ production from water.

A regenerable oxide-based H2S adsorbent with nanofibrous morphology

Hydrogen sulphide is found in raw fuels such as natural gas and coal/biomass-derived syngas. It is poisonous to catalysts and corrosive to metals and therefore needs to be removed. This is often achieved using metal oxides as reactive adsorbents, but metal oxides perform poorly when subjected to repeated cycles of sulphidation and re-oxidation as a result of complex structural and chemical changes. Here, we show that Zn-Ti-O-based adsorbents with nanofibrous morphology can sustain their initial reactivity and sulphur removal capacity over multiple regeneration cycles. These nanostructured sorbents offer rapid reaction rates that overcome the gas-transport limitations of conventional pellet-based sorbents and allow all of the material to be used efficiently. Regeneration can be carried out at the same temperature as the sulphidation step because of the higher reactivity, which prevents sorbent deterioration and reduces energy use. The efficient regeneration of the adsorbent is also aided by structural features such as the growth of hierarchical nanostructures and preferential stabilization of a wurtzite phase in the sulphidation product.

ZnS nanostructure arrays: a developing material star

Semiconductor nanostructure arrays are of great scientific and technical interest because of the strong non-linear and electro-optic effects that occur due to carrier confinement in three dimensions. The use of such nanostructure arrays with tailored geometry, array density, and length-diameter-ratio as building blocks are expected to play a crucial role in future nanoscale devices. With the unique properties of a direct wide-bandgap semiconductor, such as the presence of polar surfaces, excellent transport properties, good thermal stability, and high electronic mobility, ZnS nanostructure arrays has been a developing material star. The research on ZnS nanostructure arrays has seen remarkable progress over the last five years due to the unique properties and important potential applications of nanostructure arrays, which are summarized here. Firstly, a survey of various methods to the synthesis of ZnS nanostructure arrays will be introduced. Next recent efforts on exploiting the unique properties and applications of ZnS nanostructure arrays are discussed. Potential future directions of this research field are also highlighted.