Foldamers controlled by functional triamino acids: structural investigation of α/γ-hybrid oligopeptides

Peptide-like foldamers controlled by normal amide backbone hydrogen bonding have been extensively studied, and their folding patterns largely rely on configurational and conformational constraints induced by the steric properties of backbone substituents at appropriate positions. In contrast, opportunities to influence peptide secondary structure by functional groups forming individual hydrogen bond networks have not received much attention. Here, peptide-like foldamers consisting of alternating α,β,γ-triamino acids 3-amino-4-(aminomethyl)-2-methylpyrrolidine-3-carboxylate (AAMP) and natural amino acids glycine and alanine are reported, which were obtained by solution phase peptide synthesis. They form ordered secondary structures, which are dominated by a three-dimensional bridged triazaspiranoid-like hydrogen bond network involving the non-backbone amino groups, the backbone amide hydrogen bonds, and the relative configuration of the α,β,γ-triamino and α-amino acid building blocks. This additional stabilization leads to folding in both nonpolar organic as well as in aqueous environments. The three-dimensional arrangement of the individual foldamers is supported by X-ray crystallography, NMR spectroscopy, chiroptical methods, and molecular dynamics simulations.

Redox-Regulated and Guest-Driven Transformations of Aromatic Oligoamide Foldamers in Advanced Structures

In this study, we demonstrate that an aromatic oligoamide sequence assembles into a trimeric helix-turn-helix architecture with a disulfide linkage, and upon cleavage of this linkage, it reconstructs into an antiparallel double helix. The antiparallel double helix is accessible to encapsulate a diacid guest within its cavity, forming a 2:1 host-guest complex. In contrast, hydrogen-bonding interactions between the trimeric-assembled structure and guests induce a conformational shift in the trimeric helix, resulting in a cross-shaped double-helix complex at a 2:2 host-guest ratio. Interconversions between the trimeric helix and the antiparallel double helix, along with their respective host-guest complexes, can be initiated through thiol/disulfide redox-mediated regulation.

Herringbone Helical Foldamers from Aromatic Ether Derived ϵ-Amino Acid Peptides

Oligomers based on an aromatic ether derived ϵ-amino acid peptides folded into herringbone helical structures, induced by successive NH-O-NH & O-NH-O bifurcated hydrogen bonding interactions and reinforced by π-π stacking between aryls from adjacent layers. The diaryl ether bonds -O- worked both as structural units to provide turn motifs for changing the amplitude of the slope along the axis of helix for herringbone formation, and also as acceptors for hydrogen bonding. Attachment of a single chiral carbon to the C-termini of the peptides induced excess of single-handed screw sense and amplification through the chain propagation as exemplified by chain length dependent circular dichroism (CD) investigations.

Molecular Sensing and Manipulation of Protein Oligomerization in Membrane Nanotubes with Bolaamphiphilic Foldamers

Adaptive and reversible self-assembly of supramolecular protein structures is a fundamental characteristic of dynamic living matter. However, the quantitative detection and assessment of the emergence of mesoscale protein complexes from small and dynamic oligomeric precursors remains highly challenging. Here, we present a novel approach utilizing a short membrane nanotube (sNT) pulled from a planar membrane reservoir as nanotemplates for molecular reconstruction, manipulation, and sensing of protein oligomerization and self-assembly at the mesoscale. The sNT reports changes in membrane shape and rigidity caused by membrane-bound proteins as variations of the ionic conductivity of the sNT lumen. To confine oligomerization to the sNT, we have designed and synthesized rigid oligoamide foldamer tapes (ROFTs). Charged ROFTs incorporate into the planar and sNT membranes, mediate protein binding to the membranes, and, driven by the luminal electric field, shuttle the bound proteins between the sNT and planar membranes. Using Annexin-V (AnV) as a prototype, we show that the sNT detects AnV oligomers shuttled into the nanotube by ROFTs. Accumulation of AnV on the sNT induces its self-assembly into a curved lattice, restricting the sNT geometry and inhibiting the material uptake from the reservoir during the sNT extension, leading to the sNT fission. By comparing the spontaneous and ROFT-mediated entry of AnV into the sNT, we reveal how intricate membrane curvature sensing by small AnV oligomers controls the lattice self-assembly. These results establish sNT-ROFT as a powerful tool for molecular reconstruction and functional analyses of protein oligomerization and self-assembly, with broad application to various membrane processes.

Unnatural helical peptidic foldamers as protein segment mimics

Unnatural helical peptidic foldamers have attracted considerable attention owing to their unique folding behaviours, diverse artificial protein binding mechanisms, and promising applications in chemical, biological, medical, and material fields. Unlike the conventional α-helix consisting of molecular entities of native α-amino acids, unnatural helical peptidic foldamers are generally comprised of well-defined backbone conformers with unique and unnatural structural parameters. Their folded structures usually arise from unnatural amino acids such as N-substituted glycine, N-substituted-β-alanine, β-amino acid, urea, thiourea, α-aminoxy acid, α-aminoisobutyric acid, aza-amino acid, aromatic amide, γ-amino acid, as well as sulfono-γ-AA amino acid. They can exhibit intriguing and predictable three-dimensional helical structures, generally featuring superior resistance to proteolytic degradation, enhanced bioavailability, and improved chemodiversity, and are promising in mimicking helical segments of various proteins. Although it is impossible to include every piece of research work, we attempt to highlight the research progress in the past 10 years in exploring unnatural peptidic foldamers as protein helical segment mimics, by giving some representative examples and discussing the current challenges and future perspectives. We expect that this review will help elucidate the principles of structural design and applications of existing unnatural helical peptidic foldamers in protein segment mimicry, thereby attracting more researchers to explore and generate novel unnatural peptidic foldamers with unique structural and functional properties, leading to more unprecedented and practical applications.

Molecular torsion springs: alteration of helix curvature in frustrated tertiary folds

The first abiotic foldamer tertiary structures have been recently reported in the form of aromatic helix-turn-helix motifs based on oligo-quinolinecarboxamides held together by intramolecular hydrogen bonds. Tertiary folds were predicted by computational modelling of the hydrogen-bonding interfaces between helices and later verified by X-ray crystallography. However, the prognosis of how the conformational preference inherent to each helix influences the tertiary structure warranted further investigation. Several new helix-turn-helix sequences were synthesised in which some hydrogen bonds have been removed. Contrary to expectations, this change did not strongly destabilise the tertiary folds. On closer inspection, a new crystal structure revealed that helices adopt their natural curvature when some hydrogen bonds are missing and undergo some spring torsion upon forming the said hydrogen bonds, thus potentially giving rise to a conformational frustration. This phenomenon sheds light on the aggregation behaviour of the helices when they are not linked by a turn unit.

Inhibition of Amyloid Protein Aggregation Using Selected Peptidomimetics

Aberrant protein aggregation leads to the formation of amyloid fibrils. This phenomenon is linked to the development of more than 40 irremediable diseases such as Alzheimer's disease, Parkinson's disease, type 2 diabetes, and cancer. Plenty of research efforts have been given to understanding the underlying mechanism of protein aggregation, associated toxicity, and the development of amyloid inhibitors. Recently, the peptidomimetic approach has emerged as a potential tool to modulate several protein-protein interactions (PPIs). In this review, we discussed selected peptidomimetic-based approaches for the modulation of important amyloid proteins (Islet Amyloid Polypeptide, Amyloid Beta, α-synuclein, mutant p53, and insulin) aggregation. This approach holds a powerful platform for creating an essential stepping stone for the vital development of anti-amyloid therapeutic agents.

Folding and Duplex Formation in Sequence-Defined Aniline Benzaldehyde Oligoarylacetylenes

In all known genetic polymers, molecular recognition via hydrogen bonding between complementary subunits underpins their ability to encode and transmit information, to form sequence-defined duplexes, and to fold into catalytically active forms. Reversible covalent interactions between complementary subunits provide a different way to encode information, and potentially function, in sequence-defined oligomers. Here, we examine six oligoarylacetylene trimers composed of aniline and benzaldehyde subunits. Four of these trimers self-pair to form two-rung duplex structures, and two form macrocyclic 1,3-folded structures. The equilibrium proportions of these structures can be driven to favor each of the observed structures almost entirely depending upon the concentration of trimers and an acid catalyst. Quenching the acidic trimer solutions with an organic base kinetically traps all species such that they can be isolated and characterized. Mixtures of complementary trimers form exclusively sequence-specific 3-rung duplexes. Our results suggest that reversible covalent bonds could in principle guide the formation of more complex folded conformations of longer oligomers.

Exploring Helical Folding in Oligomers of Cyclopentane-Based ϵ-Amino Acids: A Computational Study

The conformational preferences of oligopeptides of an ϵ‐amino acid (2‐((1R,3S)‐3‐(aminomethyl)cyclopentyl)acetic acid, Amc₅a) with a cyclopentane substituent in the C^β−C^γ−C^δ sequence of the backbone were investigated using DFT methods in chloroform and water. The most preferred conformation of Amc₅a oligomers (dimer to hexamer) was the H₁₆ helical structure both in chloroform and water. Four residues were found to be sufficient to induce a substantial H₁₆ helix population in solution. The Amc₅a hexamer adopted a stable left‐handed (M)‐2.3₁₆ helical conformation with a rise of 4.8 Å per turn. The hexamer of Ampa (an analogue of Amc₅a with replacing cyclopentane by pyrrolidine) adopted the right‐handed mixed (P)‐2.9_18/16 helical conformation in chloroform and the (M)‐2.4₁₆ helical conformation in water. Therefore, hexamers of ϵ‐amino acid residues exhibited different preferences of helical structures depending on the substituents in peptide backbone and the solvent polarity as well as the chain length.

Tweezer-type binding cavity formed by the helical folding of a carbazole-pyridine oligomer

We have synthesised a new aromatic foldamer based on the carbazole-pyridine oligomers that adopt helical conformations via dipole-dipole interactions and π-stacking between two ethynyl bond-linked monomers. This foldamer scaffold has been further modified into a synthetic receptor with a tweezer-type binding cavity outside the helical backbone upon folding, in contrast to most aromatic foldamers with internal binding cavities. The tweezer-type cavity is composed of two parallel pyrenyl planes, allowing for the intercalation of a naphthalenediimide guest via π-stacking and CH⋯O interactions, as demonstrated using its ¹H NMR spectra and X-ray crystal structure.

Guest-Driven Control of Folding in a Crown-Ether-Functionalized ortho-Phenylene

A crown-ether-functionalized o-phenylene tetramer has been synthesized and coassembled with monotopic and ditopic, achiral and chiral secondary ammonium ion guests. NMR spectroscopy shows that the o-phenylene forms both 1:1 and 1:2 complexes with monotopic guests while remaining well-folded. Binding of an elongated ditopic guest, however, forces the o-phenylene to misfold by pulling the terminal rings apart. A chiral ditopic guest biases the o-phenylene twist sense.

Linear Dichroism Activity of Chiral Poly(p-Aryltriazole) Foldamers

Controllable higher-order assembly is a central aim of macromolecular chemistry. An essential challenge to developing these molecules is improving our understanding of the structures they adopt under different conditions. Here, we demonstrate how flow linear dichroism (LD) spectroscopy is used to provide insights into the solution structure of a chiral, self-assembled fibrillar foldamer. Poly(para-aryltriazole)s fold into different structures depending on the monomer geometry and variables such as solvent and ionic strength. LD spectroscopy provides a simple route to determine chromophore alignment in solution and is generally used on natural molecules or molecular assemblies such as DNA and M13 bacteriophage. In this contribution, we show that LD spectroscopy is a powerful tool in the observation of self-assembly processes of synthetic foldamers when complemented by circular dichroism, absorbance spectroscopy, and microscopy. To that end, poly(para-aryltriazole)s were aligned in a flow field under different solvent conditions. The extended aromatic structures in the foldamer give rise to a strong LD signal that changes in sign and in intensity with varying solvent conditions. A key advantage of LD is that it only detects the large assemblies, thus removing background due to monomers and small oligomers.

Using a Coarse-Grained Modeling Framework to Identify Oligomeric Motifs with Tunable Secondary Structure

Coarse-grained modeling can be used to explore general theories that are independent of specific chemical detail. In this paper, we present cg_openmm, a Python-based simulation framework for modeling coarse-grained hetero-oligomers and screening them for structural and thermodynamic characteristics of cooperative secondary structures. cg_openmm facilitates the building of coarse-grained topology and random starting configurations, setup of GPU-accelerated replica exchange molecular dynamics simulations with the OpenMM software package, and features a suite of postprocessing thermodynamic and structural analysis tools. In particular, native contact analysis, heat capacity calculations, and free energy of folding calculations are used to identify and characterize cooperative folding transitions and stable secondary structures. In this work, we demonstrate the capabilities of cg_openmm on a simple 1-1 Lennard-Jones coarse-grained model, in which each residue contains 1 backbone and 1 side-chain bead. By scanning both nonbonded and bonded force-field parameter spaces at the coarse-grained level, we identify and characterize sets of parameters which result in the formation of stable helices through cooperative folding transitions. Moreover, we show that the geometries and stabilities of these helices can be tuned by manipulating the force-field parameters.

Subtle Modification of Imine-linked Helical Receptors to Significantly Alter their Binding Affinities and Selectivities for Chiral Guests

Aromatic helical receptors P-1 and P-2 were slightly modified by aerobic oxidation to afford new receptors P-7 and P-8 with right-handed helical cavities. This subtle modification induced significant changes in the binding properties for chiral guests. Specifically, P-1 was reported to bind d-tartaric acid (K_a =35500 M^-1 ), used as a template, much strongly than l-tartaric acid (326 M^-1 ). In contrast, its modified receptor P-7 exhibited significantly reduced affinities for d-tartaric acid (3600 M^-1 ) and l-tartaric acid (125 M^-1 ). More dramatic changes in the affinities and selectivities were observed for P-2 and P-8 upon binding of polyol guests. P-2 was determined to selectively bind d-sorbitol (52000 M^-1 ) over analogous guests, but P-8 showed no binding selectivity: d-sorbitol (1890 M^-1 ), l-sorbitol (3330 M^-1 ), d-arabitol (959 M^-1 ), l-arabitol (4970 M^-1 ) and xylitol (4960 M^-1 ) in 5% (v/v) DMSO/CH₂ Cl₂ at 25±1 °C. These results clearly demonstrate that even subtle post-modifications of synthetic receptors may significantly alter their binding affinities and selectivities, in particular for guests of long and flexible chains.

Folding and duplex formation in mixed sequence recognition-encoded m-phenylene ethynylene polymers

Oligomers equipped with complementary recognition units have the potential to encode and express chemical information in the same way as nucleic acids. The supramolecular assembly properties of m-phenylene ethynylene polymers equipped with H-bond donor (D = phenol) and H-bond acceptor (A = phosphine oxide) side chains have been investigated in chloroform solution. Polymerisation of a bifunctional monomer in the presence of a monofunctional chain stopper was used for the one pot synthesis of families of m-phenylene ethynylene polymers with sequences ADnA or DAnD (n = 1-5), which were separated by chromatography. All of the oligomers self-associate due to intermolecular H-bonding interactions, but intramolecular folding of the monomeric single strands can be studied in dilute solution. NMR and fluorescence spectroscopy show that the 3-mers ADA and DAD do not fold, but there are intramolecular H-bonding interactions for all of the longer sequences. Nevertheless, 1 : 1 mixtures of sequence complementary oligomers all form stable duplexes. Duplex stability was quantified using DMSO denaturation experiments, which show that the association constant for duplex formation increases by an order of magnitude for every base-pairing interaction added to the chain, from 103 M-1 for ADA·DAD to 105 M-1 for ADDDA·DAAAD. Intramolecular folding is the major pathway that competes with duplex formation between recognition-encoded oligomers and limits the fidelity of sequence-selective assembly. The experimental approach described here provides a practical strategy for rapid evaluation of suitability for the development of programmable synthetic polymers.

N-Alkylated Aromatic Poly- and Oligoamides

N-alkylated aromatic poly- and oligoamides are a particular class of abiotic foldamers that is deprived of the capability of forming intramolecular hydrogen-bonding networks to stabilize their tri-dimensional structure. The alkylation of the backbone amide nitrogen atoms greatly increases the chemical diversity accessible for aromatic poly- and oligoamides. However, the nature and the conformational preferences of the N,N-disubstituted amides profoundly modify the folding properties of these aromatic poly- and oligoamides. In this Review, representative members of this class of aromatic poly- and oligoamides will be highlighted, among them N-alkylated phenylene terephthalamides, benzanilides, pyridylamides, and aminomethyl benzamide oligomers. The principal synthetic pathways to the main classes of N-alkylated aromatic polyamides with narrow to broad molecular-weight distribution, or oligoamides with specific sequences, will be detailed and their foldameric properties will be discussed. The Review will end by describing the few applications reported to date and future prospects for the field.

Secondary Structure in Nonpeptidic Supramolecular Block Copolymers

Proteins contain a level of complexity-secondary and tertiary structures-that polymer chemists aim to imitate. The bottom-up synthesis of protein-mimicking polymers mastering sequence variability and dispersity remains challenging. Incorporating polymers with predefined secondary structures, such as helices and π-π stacking sheets, into block copolymers circumvents the issue of designing and predicting one facet of their 3D architecture. Block copolymers with well-defined secondary-structure elements formed by covalent chain extension or supramolecular self-assembly may be considered for localized tertiary structures.In this Account, we describe a strategy toward block copolymers composed of units bearing well-defined secondary structures mixed in a "plug-and-play" manner that approaches a modicum of the versatility seen in nature. Our early efforts focused on the concept of single-chain collapse to achieve folded secondary structures through either hydrogen bonding or quadrupole attractive forces. These cases, however, required high dilution. Therefore, we turned to the ring-opening metathesis polymerization (ROMP) of [2.2]paracyclophane-1,9-dienes (pCpd), which forms conjugated, fluorescent poly(p-phenylenevinylene)s (PPVs) evocative of β-sheets. Helical building blocks arise from polymers such as poly(isocyanide)s (PICs) or poly(methacrylamide)s (PMAcs) containing bulky, chiral side groups while the coil motif can be represented by any flexible chain; we frequently chose poly(styrene) (PS) or poly(norbornene) (PNB). We installed moieties for supramolecular assembly at the chain ends of our "sheets" to combine them with complementary helical or coil-shaped polymeric building blocks.Assembling hierarchical materials tantamount to the complexity of proteins requires directional interactions with high specificity, covalent chain extension, or a combination of both chemistries. Our design is based on functionalized reversible addition-fragmentation chain-transfer (RAFT) agents that allowed for the introduction of recognition motifs at the terminus of building blocks and chain-terminating agents (CTAs) that enabled the macroinitiation of helical polymers from the chain end of ROMP-generated sheets and/or coils. To achieve triblock copolymers with a heterotelechelic helix, we relied on supramolecular assembly with helix and coil-shaped building blocks. Our most diverse structures to date comprised a middle block of PPV sheets, parallel or antiparallel, and supramolecularly or covalently linked, respectively, end-functionalized with molecular recognition units (MRUs) for orthogonal supramolecular assembly. We explored PPV sheets with multiple folds achieved by chain extension using alternating pCpd and phenyl-pentafluorophenyl β-hairpin turns. Using single-molecule polarization spectroscopy, we showed that folding occurs preferentially in multistranded over double-stranded PPV sheets. Our strategy toward protein-mimicking and foldable polymers demonstrates an efficient route toward higher ordered, well-characterized materials by taking advantage of polymers that naturally manifest secondary structures. Our studies demonstrate the retention of distinct architectures after complex assembly, a paradigm that we believe may extend to other polymeric folding systems.

Light-mediated control of activity in a photosensitive foldamer that mimics an esterase

We report a catalytic foldamer in which a fumaramide chromophore links a Ser residue to a helical domain that contains within its sequence the residues His and Asp. Photoisomerization of the fumaramide chromophore (with E geometry) to the corresponding maleamide (with Z geometry) brings together a 'catalytic triad' of Ser, His, and Asp, triggering esterase activity that is absent in the fumaramide isomer. The fumaramide/maleamide linker thus acts as a light-sensitive switchable cofactor for activation of catalytic activity in short foldamers.

Photoresponsive Prion-Mimic Foldamer to Induce Controlled Protein Aggregation

Proteins reconfigure their 3D-structure, and consequently their function, under the control of specific molecular interactions that sense, process and transmit information from the surrounding environment. When this fundamental process is hampered, many pathologies occur as in the case of protein misfolding diseases. In this work, we follow the early steps of α-synuclein (aS) aggregation, a process associated with Parkinson's disease etiopathogenesis, that is promptly promoted by a light-mediated binding between the protein and a photoactive foldamer. The latter can switch between two conformations, one of which generates supramolecular fibrillar seeds that act as molecular templates able to induce a fast β-sheet transition for aS monomers that successively undergo fibrillar polymerization. The proposed method represents a powerful tool to study protein aggregation relevant to misfolding diseases in a controlled and inducible system.

Oligo-Quinolylene-Vinylene Foldamers

Quinoline based aromatic amide foldamers are known to adopt stable folded conformations. We have developed a synthetic approach to produce similar oligomers where all amide bonds, or part of them, have been replaced by an isosteric vinylene group. The results of solution and solid state structural studies show that oligomers exclusively containing vinylene linkages are not well folded, and adopt predominantly flat conformations. In contrast, a vinylene segment flanked by helical oligoamides also folds in a helix, albeit with a slightly lower curvature. The presence of vinylene functions also result in an extension of π-conjugation across the oligomer that may change charge transport properties. Altogether, these results pave the way to foldamers in which both structural control and specific electronic properties may be engineered.

Native-Based Dissipative Particle Dynamics Approach for α-Helical Folding

We developed a dissipative particle dynamics (DPD) approach that captures polyalanine folding into a stable helical conformation. Within the proposed native-based approach, the DPD parameters are derived based on the contact map constructed from the molecular dynamics (MD) simulations. We show that the proposed approach reproduces the folding of polypeptides of various lengths, including bundle formation for sufficiently long polypeptides. The proposed approach also allows one to capture the folding of the helical segments of the lysozyme. With further development of computationally efficient native-based DPD approaches for folding, modeling of a range of biomaterials incorporating α-helical segments could be extended to time and length scales far beyond those accessible in molecular dynamics simulations.

A Triptycene-Based Enantiopure Bis(Diazadibenzoanthracene) by a Chirality-Assisted Synthesis Approach

By applying a chirality-assisted synthesis (CAS) approach enantiopure diaminodibromotriptycenes were converted to rigid chiral helical diazadibenzoanthracenes, which show besides pronounced Cotton effects in circular dichroism spectra higher photoluminescence quantum yields as comparable carbacyclic analogues. For the enantiopure building blocks, a protocol was developed allowing the large scale synthesis without the necessity of separation via HPLC.

Aromatic Helical Foldamers as Nucleophilic Catalysts for the Regioselective Acetylation of Octyl β-d-Glucopyranoside

Two indolocarbazole-naphthyridine foldamers 2 and 3 that fold into helical conformations were prepared. The 4-(N,N-dimethylamino)pyridine (DMAP) moiety was introduced at one end of the foldamer strands to develop foldamer-based catalysts for the site-selective acylation of polyols. These foldamers adopt helical conformations containing internal cavities capable of binding octyl β-d-glucopyranoside. The association constants were determined to be 1.9 (±0.1)×10⁵  M^-1 for 2 and 2.1 (±0.1)×10⁵  M^-1 for 3 in CH₂ Cl₂ at 25 °C. In the presence of DMAP, 2 or 3 as the catalysts, octyl β-d-glucopyranoside was subjected to acetylation under identical reaction conditions. The DMAP-catalysed reaction afforded the random distribution of the monoacetylates (6-OAc : 4-OAc : 3-OAc : 2-OAc=33 : 24 : 41 : 2). In contrast, foldamers 2 and 3 led to the predominant formation of 6-OAc. The relative distributions were estimated to be 6-OAc : 4-OAc : 3-OAc=88 : 4 : 6 : ∼0 with 2 and 6-OAc : 4-OAc : 3-OAc : 2-OAc=90 : 3 : 6 : 1 with 3.

Multiturn Hollow Helices: Synthesis and Folding of Long Aromatic Oligoamides

Aromatic oligoamides adopting helical conformations are synthesized by coupling carboxyl-terminated basic units having two, four, and eight residues to amine-terminated oligomer precursors. Coupling yields show no noticeable reduction with the size of the basic units or the final product. One- and two-dimensional NMR spectroscopy and computational studies demonstrate the reliable helical folding of these oligomers. The X-ray structure of 16mer 7 reveals a compact, multiturn helix having a 9 Å inner pore.

The Diverse World of Foldamers: Endless Possibilities of Self-Assembly

Different classes of foldamers, which are synthetic oligomers that adopt well-defined conformations in solution, have been the subject of extensive studies devoted to the elucidation of the forces driving their secondary structures and their potential as bioactive molecules. Regardless of the backbone type (peptidic or abiotic), the most important features of foldamers are the high stability, easy predictability and tunability of their folding, as well as the possibility to endow them with enhanced biological functions, with respect to their natural counterparts, by the correct choice of monomers. Foldamers have also recently started playing a starring role in the self-assembly of higher-order structures. In this review, selected articles will be analyzed to show the striking number of self-assemblies obtained for foldamers with different backbones, which will be analyzed in order of increasing complexity. Starting from the simplest self-associations in solution (e.g., dimers of β-strands or helices, bundles, interpenetrating double and multiple helices), the formation of monolayers, vesicles, fibers, and eventually nanostructured solid tridimensional morphologies will be subsequently described. The experimental techniques used in the structural investigation, and in the determination of the driving forces and mechanisms underlying the self-assemblies, will be systematically reported. Where applicable, examples of biomimetic self-assembled foldamers and their interactions with biological components will be described.

Dramatic Enhancement of Binding Affinities Between Foldamer-Based Receptors and Anions by Intra-Receptor π-Stacking

As a synthetic model for intra-protein interactions that reinforce binding affinities between proteins and ligands, the energetic interplay of binding and folding was investigated using foldamer-based receptors capable of adopting helical structures. The receptors were designed to have identical hydrogen-bonding sites for anion binding but different aryl appendages that simply provide additional π-stacking within the helical backbones without direct interactions with the bound anions. In particular, the presence of electron-deficient aryl appendages led to dramatic enhancements in the association constant between the receptor and chloride or nitrate ions, by up to three orders of magnitude. Extended stacking within the receptor contributes to the stabilization of the entire folding structure of complexes, thereby enhancing binding affinities.

Polypyridine-Based Helical Amide Foldamer Channels: Rapid Transport of Water and Protons with High Ion Rejection

Synthetic strategies that enable rapid construction of covalent organic nanotubes with an angstrom-scale tubular pore remain scarcely reported. Reported here is a remarkably simple and mild one-pot polymerization protocol, employing POCl₃ as the polymerization agent. This protocol efficiently generates polypyridine amide foldamer-based covalent organic nanotubes with a 2.8 nm length at a yield of 50 %. Trapping single-file water chains in the 2.8 Å tubular cavity, rich in hydrogen-bond donors and acceptors, these tubular polypyridine ensembles rapidly and selectively transport water at a rate of 1.6×10⁹  H₂ O⋅S^-1 ⋅channel^-1 and protons at a speed as fast as gramicidin A, with a high rejection of ions.

Parallel Homochiral and Anti-Parallel Heterochiral Hydrogen-Bonding Interfaces in Multi-Helical Abiotic Foldamers

A hydrogen-bonding interface between helical aromatic oligoamide foldamers has been designed to promote the folding of a helix-turn-helix motif with a head-to-tail arrangement of two helices of opposite handedness. This design complements an earlier helix-turn-helix motif with a head-to-head arrangement of two helices of identical handedness interface. The two motifs were shown to have comparable stability and were combined in a unimolecular tetra-helix fold constituting the largest abiotic tertiary structure to date.

Absolute handedness control of oligoamide double helices by chiral oxazolylaniline induction

Aromatic oligoamide double helices bearing a chiral oxazolylaniline moiety were synthesized and their helix handedness was completely controlled (de > 99%).

The influence of substituents on gelation and stacking order of oligoaramid - based supramolecular networks

Self-assembly has proven to be a powerful tool for functional, smart materials such as hydrogels derived from low molecular weight compounds. However, the targeted design of functional gelators remains difficult. Here, we present a set of four Y-shaped aromatic amide tetramers with varying functionalities able to undergo different non-covalent interactions. These compounds were explored towards their self-assembly behavior and hydrogel formation by experimental methods such as UV-vis spectroscopy, rheology, small angle X-ray scattering (SAXS), scanning/transmission electron, and atomic force microscopy. Additionally, we investigated the main mechanisms behind oligomer aggregation and the structure of the resulting supramolecular chains through full atomistic molecular dynamics simulations.

Interplay of secondary and tertiary folding in abiotic foldamers

The first true abiotic tertiary folded structures, i.e. at the exclusion of any aliphatic amino acid, have recently been introduced under the form of aromatic oligoamide helix-turn-helix foldamers stabilized by hydrogen bonds in organic solvents. We present an investigation of the interplay of secondary and tertiary folding and of some cooperative effects in these systems. A solid phase synthesis approach to the preparation of these sequences was developed to facilitate systematic variation. Flexible pyridine-based units were introduced in various proportions in replacement of more rigid quinoline-based units. Conformational behaviour was assessed in solution by NMR, in the solid state by X-ray crystallography, and computationally through molecular dynamics simulations. Altogether, our results demonstrate that tertiary folding stabilizes otherwise flexible secondary structures, and that the disruption of tertiary folds upon adding polar solvents follows different mechanisms depending on whether secondary structures are inherently stable or not. These findings constitute a solid basis on which to further increase the size and complexity of abiotic folded structures and to eventually orchestrate folding dynamics and responsiveness.

Tunable E- Z Photoisomerization in α,β-Peptide Foldamers Featuring Multiple ( E/ Z)-3-Aminoprop-2-enoic Acid Units

Systems in which an external stimulus elicits a response through some sort of modification at the molecular or supramolecular level bear potential for the development of smart materials and devices. This work describes a versatile synthetic approach suitable for the stepwise incorporation of multiple, even consecutive, units of the simplest C^α,β-unsaturated β-amino acid, ( E/ Z)-3-aminoprop-2-enoic acid, in peptide-based foldamers. The properties of these, including photoinduced E/ Z isomerizations, were investigated.

Control of conformation in α-helix mimicking aromatic oligoamide foldamers through interactions between adjacent side-chains

The design, synthesis and structural characterization of non-natural oligomers that adopt well-defined conformations, so called foldamers, is a key objective in developing biomimetic 3D functional architectures. For the aromatic oligoamide foldamer family, use of interactions between side-chains to control conformation is underexplored. The current manuscript addresses this objective through the design, synthesis and conformational analyses of model dimers derived from 3-O-alkylated para-aminobenzoic acid monomers. The O-alkyl groups on these foldamers are capable of adopting syn- or anti-conformers through rotation around the Ar-CO/NH axes. In the syn-conformation this allows the foldamer to act as a topographical mimic of the α-helix whereby the O-alkyl groups mimic the spatial orientation of the i and i + 4 side-chains from the α-helix. Using molecular modelling and 2D NMR analyses, this work illustrates that covalent links and hydrogen-bonding interactions between side-chains can bias the conformation in favour of the α-helix mimicking syn-conformer, offering insight that may be more widely applied to control secondary structure in foldamers.

Correlations between secondary structure- and protein-protein interface-mimicry: the interface mimicry hypothesis

An active segment of the research community designing small molecules ("minimalist mimics" of peptide fragments) to interfere with protein-protein interactions have based their studies on an implicit hypothesis. Here we refer to this as the Secondary Structure Hypothesis, that might be defined as, "If a small molecule can orient amino acid side-chains in directions that resemble side-chains of the parent secondary structure at the interface, then that small molecule is a candidate to perturb the protein-protein interaction". Rigorous tests of this hypothesis require co-crystallization of minimalist mimics with protein receptors, and comparison of the bound conformations with the interface secondary structures they were designed to resemble. Unfortunately, to the best of our knowledge, there is no such analysis in the literature, and it is unlikely that enough examples will emerge in the near future to test the hypothesis. Research described here was designed to challenge this hypothesis from a different perspective. In a previous study, preferred conformations of a series of novel minimalist mimics were simulated then systematically overlaid on >240 000 crystallographically characterized protein-protein interfaces. Select data from that overlay procedure revealed chemotypes that overlay side chains on various PPI interfaces with a relatively high frequency of occurrence. The first aim of this work was to determine if good secondary structure mimics overlay frequently on PPI interfaces. The second aim of this work was to determine if overlays of preferred conformers at interface regions involve secondary structures. Thus situations where these conformations overlaid extremely well on PPI interfaces were analyzed to determine if secondary structures featured the PPI regions where these molecules overlaid in the previous study. Combining conclusions from these two studies enabled us to formulate a hypothesis that is complementary to the Secondary Structure Hypothesis, but, unlike this, is supported by abundant data. We call this the Interface Mimicry Hypothesis.

Complex Molecules That Fold Like Proteins Can Emerge Spontaneously

Folding can bestow macromolecules with various properties, as evident from nature's proteins. Until now complex folded molecules are the product either of evolution or of an elaborate process of design and synthesis. We now show that molecules that fold in a well-defined architecture of substantial complexity can emerge autonomously and selectively from a simple precursor. Specifically, we have identified a self-synthesizing macrocyclic foldamer with a complex and unprecedented secondary and tertiary structure that constructs itself highly selectively from 15 identical peptide-nucleobase subunits, using a dynamic combinatorial chemistry approach. Folding of the structure drives its synthesis in 95% yield from a mixture of interconverting molecules of different ring sizes in a one-step process. Single-crystal X-ray crystallography and NMR reveal a folding pattern based on an intricate network of noncovalent interactions involving residues spaced apart widely in the linear sequence. These results establish dynamic combinatorial chemistry as a powerful approach to developing synthetic molecules with folding motifs of a complexity that goes well beyond that accessible with current design approaches. The fact that such molecules can form autonomously implies that they may have played a role in the origin of life at earlier stages than previously thought possible.

Encapsulation of dihydrogenphosphate ions as a cyclic dimer to the cavities of site-specifically modified indolocarbazole-pyridine foldamers

Site-specifically modified aromatic foldamers can encapsulate dihydrogen phosphate ions as a cyclic dimer via the formation of twelve hydrogen bonds.

Quadruple hybridization of quinoline–triazole oligomers

A series of quinoline–triazole oligomers self-assembled into quadruple helical structures is presented.

Highly efficient synthesis of hydrogen-bonded aromatic tetramers as macrocyclic receptors for selective recognition of lithium ions

Lithium ion receptor based on novel hydrogen-bonded aromatic tetramer biphenyl-cyclo[4]aramide has been developed.

Biomimetic folding of small organic molecules driven by multiple non-covalent interactions

The supramolecular self-folding of UPy-based monomers with low molecular weight driven by multiple non-covalent interactions has been developed.