Bioaccessibility of Metallic Nickel and Nickel Oxide Nanoparticles in Four Simulated Biological Fluids

Bioaccessibility of metals from substances and alloys is increasingly used as part of the assessment to predict potential toxicity. However, data are sparse on the metal bioaccessibility from nanoparticle (NP) size metal substances. This study examines nickel ion release from metallic nickel and nickel oxide micron particles (MPs) and NPs in simulated biological fluids at various timepoints including those relevant for specific routes of exposure. The results suggest that MPs of both metallic nickel and nickel oxide generally released more nickel ions in acidic simulated biological fluids (gastric and lysosomal) than NPs of the same substance, with the largest differences being for nickel oxide. In more neutral pH fluids (interstitial and perspiration), nickel metal NPs released more nickel ions than MPs, with nickel oxide results showing a higher release for MPs in interstitial fluid yet a lower release in perspiration fluid. Various experimental factors related to the particle, fluid, and extraction duration were identified that can have an impact on the particle dissolution and release of nickel ions. Overall, the results suggest that based on nickel release alone, nickel NPs are not inherently more hazardous than nickel MPs. Moreover, analyses should be performed on a case-by-case basis with consideration of various experimental factors and correlation with in vivo data.

Nickel (Ni) phytotoxicity and detoxification mechanisms: A review

Scientists studying the environment, physiology, and biology have been particularly interested in nickel (Ni) because of its dual effects (essentiality and toxicity) on terrestrial biota. It has been reported in some studies that without an adequate supply of Ni, plants are unable to finish their life cycle. The safest Ni limit for plants is 1.5 μg g^-1, while the limit for soil is between 75 and 150 μg g^-1. Ni at lethal levels harms plants by interfering with a variety of physiological functions, including enzyme activity, root development, photosynthesis, and mineral uptake. This review focuses on the occurrence and phytotoxicity of Ni with respect to growth, physiological and biochemical aspects. It also delves into advanced Ni detoxification mechanisms such as cellular modifications, organic acids, and chelation of Ni by plant roots, and emphasizes the role of genes involved in Ni detoxification. The discussion has been carried out on the current state of using soil amendments and plant-microbe interactions to successfully remediate Ni from contaminated sites. This review has identified potential drawbacks and difficulties of various strategies for Ni remediation, discussed the importance of these findings for environmental authorities and decision-makers, and concluded by noting the sustainability concerns and future research needs regarding Ni remediation.

An Assessment of the Oral and Inhalation Acute Toxicity of Nickel Oxide Nanoparticles in Rats

Nickel oxide nanoparticles (NiO NPs) have been the focus of many toxicity studies. However, acute toxicity studies that identify toxicological dose descriptors, such as an LC50 or LD50, are lacking. In this paper, the acute toxicity of NiO NPs was evaluated in albino-derived Sprague-Dawley rats through OECD guideline studies conducted by both the oral and inhalation routes of exposure. The animals were assessed for mortality, body weight, behavioral observations, and gross necropsy. Results from previously conducted (unpublished) acute inhalation studies with larger NiO microparticles (MPs) are also included for comparison. Mortality, the primary endpoint in acute toxicity studies, was not observed for rats exposed to NiO NPs via either the oral or inhalation exposure routes, with a determined LD50 of >5000 mg/kg and an LC50 > 5.42 mg/L, respectively. Our results suggest that these NiO NPs do not exhibit serious acute toxicity in rats or warrant an acute toxicity classification under the current GHS classification criteria. This aligns with similar results for NiO MPs from this and previously published studies.

Derivation of a Ni bioaccessibility value for screening-level risk assessment of Ni substances in ingested materials including soils

The objective of the present study was to derive a Ni bioaccessibility value for screening-level risk assessment of Ni substances in ingested materials including soils where multiple Ni substances are expected but not definitively identified. Broad ranges of Ni mass loading and dissolution time of a simple gastric assay were applied to pure Ni substances (removing the confounding factors of soil constituents on dissolution), thus broadening the applicability of the conclusions. The data were also used to support current knowledge of 'read across' for Ni substances. Release of Ni from pure manufactured Ni substances (Ni metal, NiO, NiSO₄, Ni₃S₂, and NiS) was determined relative to Ni mass and substance surface area loading. Mass loadings ranged from 0.33 to 20.0 g Ni per L of 0.15 M HCl, and dissolution time ranged from 1 to 168 h. Proton exhaustion was indicated only at the highest loading (20 g/L) of NiO and Ni-M. Dissolution of substances other than NiSO₄ was most likely limited by formation of intermediate products at the particle surface or particle agglomeration, impeding access to the principal Ni substance. The bioaccessibility of Ni for these substances was consistent with previously published data: substances other than NiSO₄ were < 48% bioaccessible for a variety of gastric assays, which is much lower than all data for NiSO₄, the usual reference substance. Thus, we suggest that Ni bioaccessibility data from gastric assays that are most relevant to human exposure can be relied upon to develop scientifically sound screening-level human health RA decisions for Ni contamination in soils and sediments in the absence of detailed Ni speciation.

Comparison of quantitative mineralogy and sequential leaching for characterization of Ni in workplace dust collected at a stainless steel operation

Based on epidemiological records of workers at Ni operations, regulatory guidelines commonly target specific Ni compounds for setting exposure limits. Thus, reliable methods of Ni speciation in airborne dust samples are required for effective monitoring of workplace exposure. Zatka sequential leaching has been routinely performed industry-wide since the 1990s for characterization of Ni in dust samples; however, limitations related to leaching kinetics have been identified, and optimization of the methodology is required to improve accuracy of data. In this study, Ni characterization of dust collected from a stainless steel operation was performed using Zatka sequential leaching (original and modified protocols) and quantitative mineralogy (QEMSCAN), a method novel to the field of industrial hygiene. Mineral analysis was also performed on bulk material collected from selected work areas at the plant. The results are compared with the objective of identifying opportunities to optimize the methods for characterizing dust that is unique to stainless steel manufacturing. The quantitative mineralogical analysis determined that the Ni dust is composed of oxidic Ni (chromite and trevorite, >80% of the Ni in most samples) and metallic Ni (Ni-Fe alloy), and the results were validated against chemical assays and alternate methods of mineral characterization. In contrast, the original Zatka method erroneously identified soluble Ni as a major Ni contributor, whereas the modified Zatka method identified sulfidic Ni. The mineralogy identified Ni-barren dust and grain sizes and liberation of individual Ni compounds as potential factors that can affect leaching selectivity. Clearly, for any sequential leaching method to be useful for these workplaces, they should be optimized by including reference materials that are representative of Ni substances present at stainless steel operations (chromite, trevorite, and Ni-Fe alloy). Improving methods of sequential leaching is important because the resolution of quantitative mineralogical techniques diminishes at <3 μm (respirable dust fraction). We recommend that quantitative mineralogy be performed in parallel with methods of sequential leaching to provide a robust system of characterization.

Development of a simulated lung fluid leaching method to assess the release of potentially toxic elements from volcanic ash

Freshly erupted volcanic ash contains a range of soluble elements, some of which can generate harmful effects in living cells and are considered potentially toxic elements (PTEs). This work investigates the leaching dynamics of ash-associated PTEs in order to optimize a method for volcanic ash respiratory hazard assessment. Using three pristine (unaffected by precipitation) ash samples, we quantify the release of PTEs (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, Zn) and major cations typical of ash leachates (Mg, Na, Ca, K) in multiple simulated lung fluid (SLF) preparations and under varying experimental parameters (contact time and solid to liquid ratio). Data are compared to a standard water leach (WL) to ascertain whether the WL can be used as a simple proxy for SLF leaching. The main findings are: PTE concentrations reach steady-state dissolution by 24 h, and a relatively short contact time (10 min) approximates maximum dissolution; PTE dissolution is comparatively stable at low solid to liquid ratios (1:100 to 1:1000); inclusion of commonly used macromolecules has element-specific effects, and addition of a lung surfactant has little impact on extraction efficiency. These observations indicate that a WL can be used to approximate lung bioaccessible PTEs in an eruption response situation. This is a useful step towards standardizing in vitro methods to determine the soluble-element hazard from inhaled ash.

Bioaccessibilities of metal(loid)s and organic contaminants in particulates measured in simulated human lung fluids: A critical review

Particle-bound pollutants can pose a health risk to humans. Inhalation exposure evaluated by total contaminant concentrations significantly overestimates the potential risk. To assess the risk more accurately, bioavailability, which is the fraction that enters into the systemic circulation, should be considered. Researchers have replaced bioavailability by bioaccessibility due to the rapid and cost-efficient measurement for the latter, especially for assessment by oral ingestion. However, contaminants in particulates have different behavior when inhaled than when orally ingested. Some of the contaminants are exhaled along with exhalation, and others are deposited in the lung with the particulates. In addition, a fraction of the contaminants is released into the lung fluid and absorbed by the lung, and another fraction enters systemic circulation under the action of cell phagocytosis on particulates. Even if the release fraction, i.e., release bioaccessibility, is considered, the measurement faces many challenges. The present study highlights the factors influencing release bioaccessibility and the incorporation of inhalation bioaccessibility into the risk assessment of inhaled contaminants. Currently, there are three types of extraction techniques for simulated human lung fluids, including simple chemical solutions, sequential extraction techniques, and physiologically based techniques. The last technique generally uses three kinds of solution: Gamble's solution, Hatch's solution, and artificial lysosomal fluid, which are the most widely used physiologically based simulated human lung fluids. External factors such as simulated lung fluid composition, pH, extraction time, and sorption sinks can affect release bioaccessibility, whereas particle size and contaminant properties are important internal factors. Overall, release bioaccessibility is less used than bioaccessibility considering the deposition fraction when assessing the risk of contaminants in inhaled particulates. The release bioaccessibility measurement poses two main challenges: developing a unified, accurate, stable, simple, and systematic biologically based method, and validating the method through in-vivo assays.

Changes over time in pulmonary inflammatory response in rat lungs after intratracheal instillation of nickel oxide nanoparticles

OBJECTIVE

Nickel oxide nanoparticles (NiONPs) are representative metal oxide NPs and are categorized as an insoluble nickel compound. Our previous studies suggested that NiONPs have more pulmonary toxicity than micron-sized NiO because they may dissolve slowly and produce many more Ni ions. We confirmed the hypothesis that the slow dissolution of NiONPs induces a change in inflammatory response over time.

METHOD

We reanalyzed our previous data on intratracheally instilled NiONP to rats and focused on Ni retention in the lungs and the lung weight ratio for each rat to the mean of control rat lungs. We also measured the solubility of NiONPs and micron-sized NiO samples by means of an artificial lysosomal fluid (ALF, pH 4.5).

RESULTS

The in vivo test of instilled NiONPs resulted in the biomarkers reaching their peak values at 1 week or 1 month, and not at 3 days, after instillation. We found that as the NiO mass in the lung increased, the lung weight ratios tended to increase. The relationships shifted to more toxic at 3 days to 1 month (P < .01). Compared to the dissolution of NiONPs in the ALF that took roughly 1 week, the dissolution of NiONPs in vivo was take about 1 month or more.

CONCLUSION

When intratracheally instilled NiONPs dissolve slowly in the phagolysosomes of alveolar macrophages (AM), the resulting Ni ions cause the AM to transform into foamy cells at 1 month, and the inflammatory response persists even at 3 months after instillation.

Assessment of oral and lung bioaccessibility of Cd and Pb from smelter-impacted dust

Soil and dust contamination by metals engenders significant environmental and health problems in northern France where a lead smelter was in activity for more than a century. This study aims to examine the long-term effects of the smelter, 10 years after its closedown, on the presence of metal in sidewalk dust for a better assessment of the local population's exposure to Cd and Pb. The investigation included: (i) the metal distribution in different dust particle sizes and (ii) the assessment of metal bioaccessibility via ingestion and inhalation of dust. Seventy-two sidewalk dust samples were collected using a dust-sampling vacuum. The samples were sieved to collect different particle sizes from 0.3 to 1000 μm. The unified bioaccessibility method (UBM) was employed to evaluate the oral bioaccessibility of metals in the different particle sizes. The pulmonary bioaccessible fraction of Cd and Pb via the finest particles was extracted with lung-simulating solution (artificial lysosomal fluid). Ten years after the smelter closedown, (i) a strong relationship was observed between the concentrations of metals in dust and the distance to the former smelter, whatever the particle size; (ii) both total and oral bioaccessible concentrations of metals were high in the finest fraction (0.3-5 μm) and decreased when the particle size increased; (iii) a higher oral bioaccessibility of Cd and Pb was measured in the gastric phase (on average 43% for both metals for all particle sizes) and compared to the gastrointestinal phase (on average 16% for both metals for all particle sizes); and (iv) metal bioaccessibility via inhalation of dust was relatively high (on average 74 and 69%, for Cd and Pb, respectively). The results of the present study suggest that this environmental compartment may be a sensitive and effective indicator of anthropogenic metal contamination and the human exposure in urban areas.

In Vitro Investigations of Human Bioaccessibility from Reference Materials Using Simulated Lung Fluids

An investigation for assessing pulmonary bioaccessibility of metals from reference materials is presented using simulated lung fluids. The objective of this paper was to contribute to an enhanced understanding of airborne particulate matter and its toxic potential following inhalation. A large set of metallic elements (Ba, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sr, and Zn) was investigated using three lung fluids (phosphate-buffered saline, Gamble's solution and artificial lysosomal fluid) on three standard reference materials representing different types of particle sources. Composition of the leaching solution and four solid-to-liquid (S/L) ratios were tested. The results showed that bioaccessibility was speciation- (i.e., distribution) and element-dependent, with percentages varying from 0.04% for Pb to 86.0% for Cd. The higher extraction of metallic elements was obtained with the artificial lysosomal fluid, in which a relative stability of bioaccessibility was observed in a large range of S/L ratios from 1/1000 to 1/10,000. For further investigations, it is suggested that this method be used to assess lung bioaccessibility of metals from smelter-impacted dusts.

A critical review of approaches and limitations of inhalation bioavailability and bioaccessibility of metal(loid)s from ambient particulate matter or dust

Inhalation of metal(loid)s in ambient particulate matter (APM) represents a significant exposure pathway to humans. Although exposure assessment associated with this pathway is currently based on total metal(loid) content, a bioavailability (i.e. absorption in the systemic circulation) and/or bioaccessibility (i.e. solubility in simulated lung fluid) based approach may more accurately quantify exposure. Metal(loid) bioavailability-bioaccessibility assessment from APM is inherently complex and lacks consensus. This paper reviews the discrepancies that impede the adoption of a universal protocol for the assessment of inhalation bioaccessibility. Exposure assessment approaches for in-vivo bioavailability, in-vitro cell culture and in-vitro bioaccessibility (composition of simulated lungs fluid, physico-chemical and methodological considerations) are critiqued in the context of inhalation exposure refinement. An important limitation of bioavailability and bioaccessibility studies is the use of considerably higher than environmental metal(loid) concentration, which diminishing their relevance to human exposure scenarios. Similarly, individual metal(loid) studies have been criticised due to complexities of APM metal(loid) mixtures which may impart synergistic or antagonistic effects compared to single metal(loid) exposure. Although a number of different simulated lung fluid (SLF) compositions have been used in metal(loid) bioaccessibility studies, information regarding the comparative leaching efficiency among these different SLF and comparisons to in-vivo bioavailability data is lacking. In addition, the particle size utilised is often not representative of what is deposited in the lungs while assay parameters (extraction time, solid to liquid ratio, temperature and agitation) are often not biologically relevant. Research needs are identified in order to develop robust in-vitro bioaccessibility protocols for the assessment or prediction of metal(loid) bioavailability in APM for the refinement of inhalation exposure.

Which Metals are Green for Catalysis? Comparison of the Toxicities of Ni, Cu, Fe, Pd, Pt, Rh, and Au Salts

Environmental profiles for the selected metals were compiled on the basis of available data on their biological activities. Analysis of the profiles suggests that the concept of toxic heavy metals and safe nontoxic alternatives based on lighter metals should be re-evaluated. Comparison of the toxicological data indicates that palladium, platinum, and gold compounds, often considered heavy and toxic, may in fact be not so dangerous, whereas complexes of nickel and copper, typically assumed to be green and sustainable alternatives, may possess significant toxicities, which is also greatly affected by the solubility in water and biological fluids. It appears that the development of new catalysts and novel applications should not rely on the existing assumptions concerning toxicity/nontoxicity. Overall, the available experimental data seem insufficient for accurate evaluation of biological activity of these metals and its modulation by the ligands. Without dedicated experimental measurements for particular metal/ligand frameworks, toxicity should not be used as a "selling point" when describing new catalysts.

Exposure of nano- and ultrafine Ni particles to synthetic biological solutions: predicting fate-related dissolution and accumulation

The growing production and use of nickel (Ni) nanopowders with low biopersistence makes dissolution and accumulation degree in a body an important parameters needed for the risk assessment of nanoparticles. We propose an experimental approach for rapid determination of the dissolution degree of nanoscale (77 nm) and ultrafine (275 nm) Ni particles in synthetic biological solutions. It has been shown that after 2 h of exposure to simulating saliva and lysosomal liquid the dissolution degree of nanoparticles can reach 30 and 60 wt.%, respectively. With decreasing of the particle’s size, they are characterized by increased solubility in saliva and the pulmonary tract; and the particles completely dissolve in 24 h. There was an attempt to predict the potential extent of accumulation of nickel compounds in the human body with particles entering the body by saliva or with breathing: with 3.8 times size decrease the probability of nickel accumulation in a body can rise in 3.5 times.

Derivation of PM10 size-selected human equivalent concentrations of inhaled nickel based on cancer and non-cancer effects on the respiratory tract

Abstract Nickel (Ni) in ambient air is predominantly present in the form of oxides and sulfates, with the distribution of Ni mass between the fine (particle aerodynamic diameter < 2.5 µm; PM2.5) and coarser (2.5-10 µm) size-selected aerosol fractions of PM10 dependent on the aerosol's origin. When deriving a long-term health protective reference concentration for Ni in ambient air, the respiratory toxicity and carcinogenicity effects of the predominant Ni compounds in ambient air must be considered. Dosimetric adjustments to account for differences in aerosol particle size and respiratory tract deposition and/or clearance among rats, workers, and the general public were applied to experimentally- and epidemiologically-determined points of departure (PODs) such as no(low)-effect concentrations, for both cancer and non-cancer respiratory effects. This approach resulted in the derivation of threshold-based PM10 size-selected equivalent concentrations (modified PODs) of 0.5 µg Ni/m(3) based on workers' cancer effects and 9-11 µg Ni/m(3) based on rodent respiratory toxicity effects. Sources of uncertainty in exposure extrapolations are described. These are not reference concentrations; rather the derived PM10 size-selected modified PODs can be used as the starting point for the calculation of ambient air reference concentrations for Ni. The described approach is equally applicable to other particulates.

Reconstruction of historical exposures at a Welsh nickel refinery (1953-2000)

Past epidemiological studies of workers in a nickel refinery in Clydach, Wales, have shown evidence of large excess respiratory cancer mortality risks [lung cancer relative risk (RR) ≈ 3; nasal cancer RR ≈ 140] in those employed prior to 1930, with risks dropping dramatically in workers hired subsequently. The pre-1930 risks have generally been attributed to high exposures to mixtures of nickel compounds. More recent studies of this refinery's workers have focused on those first hired in 1953, when many of the operations that presumably gave rise to the high exposures were no longer in operation. While these studies have shown greatly decreased lung cancer risks overall (RR ≈ 1.4), and no substantive evidence of increased nasal cancer risk, the absence of reliable exposure estimates have made it difficult to ascertain whether the increased lung cancer risks are nickel related or due to other factors. This study uses nickel measurements from the 1970s to the present, documentation of process changes, and dust measurements taken around the 1950s to construct an exposure matrix for the recent cohort. It provides evidence of at least 30-fold decreases in levels of nickel exposure from the 1950s to the present, with estimated inhalable nickel concentrations in the 1950s in excess of 5mg Ni m(-3).

Dissolution of the metal sensitizers Ni, Be, Cr in artificial sweat to improve estimates of dermal bioaccessibility

Dermal exposure to sensitizing metals is a serious occupational and public health problem. The usual approach to dermal exposure assessment is to process samples by chemical methods that use reactants to digest the metal particles and quantify the mass. In the case of dermal exposure assessment, these reactants are not representative of the skin surface film liquids and hence, may overestimate bioaccessibility. We hypothesize that the amount and form of sensitizer on a sample that leaches in a biological fluid, as can be estimated using artificial sweat, may be a more relevant metric for assessing health risks. Beryllium metal (Be), nickel metal (Ni), and chromium carbide (Cr3C2) particles were characterized and masses of sensitizing ions were measured using established reactant-assisted digestion procedures and extraction in artificial sweat under physiologically relevant conditions. Chromium ions released into artificial sweat were speciated to understand valence states. The ratios of the fraction of metal dissolved in artificial sweat relative to that dissolved by chemical-specific reactants were 1/2 (Be), 1/108 (Ni), and 1/2500 (Cr). The divalent Be and Ni cations were stable in artificial sweat over time (did not precipitate) whereas hexavalent chromium [Cr(VI)] ions decayed over time. Further analysis using speciated isotope dilution mass spectrometry revealed that the decay of Cr(VI) was accompanied by the formation of Cr(III) in the sweat model. Use of reactant-assisted analytical chemistry to quantify amounts of metal sensitizers on samples could overestimate biologically relevant exposure. In addition to mass, the valence state also influences penetration through the outer stratum corneum of the skin and is an important consideration when assessing exposure to complex sensitizers such as Cr which have multiple valence states with differing penetration efficiencies.

Nitrogen-doped, carbon-rich, highly photoluminescent carbon dots from ammonium citrate

The synthesis of water-soluble nitrogen-doped carbon dots has received great attention, due to their wide applications in oxygen reduction reaction, cell imaging, sensors, and drug delivery. Herein, nitrogen-doped, carbon-rich, highly photoluminescent carbon dots have been synthesized for the first time from ammonium citrate under hydrothermal conditions. The obtained nitrogen-doped carbon dots possess bright blue luminescence, short fluorescence lifetime, pH-sensitivity and excellent stability at a high salt concentration. They have potential to be used for pH sensors, cell imaging, solar cells, and photocatalysis.

Nickel release and surface characteristics of fine powders of nickel metal and nickel oxide in media of relevance for inhalation and dermal contact

Differences in surface oxide characteristics and extent of nickel release have been investigated in two thoroughly characterized micron-sized (mainly <4 μm) nickel metal powders and a nickel oxide bulk powder when immersed in two different synthetic fluids, artificial sweat (ASW-pH 6.5) and artificial lysosomal fluid (ALF-pH 4.5) for time periods up to 24h. The investigation shows significantly more nickel released from the nickel metal powders (<88%) compared to the NiO powder (<0.1%), attributed to differences in surface properties. Significantly more nickel was released from the nickel metal powder with a thin surface oxide predominantly composed of non-stoichiometric nickel oxide (probably Ni(2)O(3)), compared to the release from the nickel metal powder with a thicker surface oxide predominantly composed of NiO and to a lesser extent Ni(2)O(3) (88% and 25% release after 24 h in ALF, respectively). Significantly lower amounts of nickel were released from the nickel metal powders in ASW (2.2% and <1%, respectively). The importance of particle and surface characteristics for any reliable risk assessment is discussed, and generated data compared with literature findings on bioaccessibility (released fraction) of nickel from powders of nickel metal and nickel oxide, and massive forms of nickel metal and nickel-containing alloys.

A cross-talk between NFAT and NF-κB pathways is crucial for nickel-induced COX-2 expression in Beas-2B cells

Cyclooxygenase-2 (COX-2) is a critical enzyme implicated in chronic inflammation-associated cancer development. Our studies have shown that the exposure of Beas-2B cells, a human bronchial epithelial cell line, to lung carcinogenic nickel compounds results in increased COX-2 expression. However, the signaling pathways leading to nickel-induced COX-2 expression are not well understood. In the current study, we found that the exposure of Beas-2B cells to nickel compounds resulted in the activation of both nuclear factor of activated T cell (NFAT) and nuclear factor-κB (NF-κB). The expression of COX-2 induced upon nickel exposure was inhibited by either a NFAT pharmacological inhibitor or the knockdown of NFAT3 by specific siRNA. We further found that the activation of NFAT and NF-κB was dependent on each other. Since our previous studies have shown that NF-κB activation is critical for nickel-induced COX-2 expression in Beas-2B cells exposed to nickel compounds under same experimental condition, we anticipate that there might be a cross-talk between the activation of NFAT and NF-κB for the COX-2 induction due to nickel exposure in Beas-2B cells. Furthermore, we showed that the scavenging of reactive oxygen species (ROS) by introduction of mitochondrial catalase inhibited the activation of both NFAT and NF-κB, and the induction of COX-2 due to nickel exposure. Taken together, our results defining the evidence showing a key role of the cross-talk between NFAT and NF-κB pathways in regulating nickel-induced COX-2 expression, further provide insight into the understanding of the molecular mechanisms linking nickel exposure to its lung carcinogenic effects.

In vitro estimates of bioaccessible nickel in field-contaminated soils, and comparison with in vivo measurement of bioavailability and identification of mineralogy

This study determined nickel (Ni) bioaccessibility in weathered smelter-contaminated soils, separately for particle-sized fractions using two in vitro methods: simulated gastrointestinal digestion (PBET) and PBET followed by absorption by Caco-2 cells. Relative bioavailability of Ni in soils was determined in vivo using rats, validating in vitro estimates; a mineralogical basis of variation in bioavailability/bioaccessibility among soils was explored. In vitro assays identified the same difference in bioaccessibility for Ni among particle size fractions. PBET estimates were more precise, thus likely to be more useful in discerning differences among soils. In vivo bioavailability for Ni was below limit of detection for the small soil particles, and 31% and 56% for the larger particles. The relative bioavailability calculated from this work suggests that risk from ingesting Ni-contaminated soils could be overestimated by between 2- and 50-fold if the estimates of exposure are not adjusted for the lower bioavailability of weathered Ni originating from smelter emissions. The overestimation that would occur by using total Ni is greatest for the particle size that is most likely to adhere to the hands of children, demonstrating the importance of particle-size separation of soils for bioavailability determination and risk assessment.

Development of an in vitro method to estimate lung bioaccessibility of metals from atmospheric particles

The research presented here was initiated to improve the current knowledge on easily released metals from atmospheric particles. The objectives of this paper were to develop an in vitro method to estimate lung bioaccessibility and to provide quantitative data on metals bioaccessibility. A large set of metals has been investigated (Ba, Cd, Ce, Co, Cu, La, Mn, Mo, Ni, Pb, Rb, Sb and Zn) using two distinct fluids (water and Gamble solution) on four reference materials representing different types of particle sources. Through this study, different parameters such as extraction-time, composition of the leaching solution and solid-to-liquid (S/L) ratios were investigated. The findings obtained for four SRMs suggest that the bioaccessibility is maximized after a 24 h extraction for a range of S/L ratios varying from 1/500 to 1/50,000. We clearly demonstrate that the higher bioaccessibility of metals is obtained with the Gamble solution. Moreover, our results imply that bioaccessibility is speciation and element dependent with percentages varying from 3.3% for Pb to 92.5% for Zn. An estimation of uncertainties of 11% to 30% was obtained for metals bioaccessibility in the four reference materials. In addition, the extraction procedure was validated by performing a mass balance on both soluble and insoluble fractions. This developed method may be used to evaluate the pulmonary bioaccessibility of trace elements present in the atmospheric particles without major artefacts.

Characterization and assessment of dermal and inhalable nickel exposures in nickel production and primary user industries

The aim of this study was to measure the levels of nickel in the skin contaminant layer of workers involved in specific processes and tasks within the primary nickel production and primary nickel user industries. Dermal exposure samples were collected using moist wipes to recover surface contamination from defined areas of skin. These were analysed for soluble and insoluble nickel species. Personal samples of inhalable dust were also collected to determine the corresponding inhalable nickel exposures. The air samples were analysed for total inhalable dust and then for soluble, sulfidic, metallic, and oxidic nickel species. The workplace surveys were carried out in five different workplaces, including three nickel refineries, a stainless steel plant, and a powder metallurgy plant, all of which were located in Europe. Nickel refinery workers involved with electrolytic nickel recovery processes had soluble dermal nickel exposure of 0.34 microg cm(-2) [geometric mean (GM)] to the hands and forearms. The GM of soluble dermal nickel exposure for workers involved in packing nickel salts (nickel chloride hexahydrate, nickel sulphate hexahydrate, and nickel hydroxycarbonate) was 0.61 microg cm(-2). Refinery workers involved in packing nickel metal powders and end-user powder operatives in magnet production had the highest dermal exposure (GM = 2.59 microg cm(-2) soluble nickel). The hands, forearms, face, and neck of these workers all received greater dermal nickel exposure compared with the other jobs included in this study. The soluble nickel dermal exposures for stainless steel production workers were at or slightly above the limit of detection (0.02 microg cm(-2) soluble nickel). The highest inhalable nickel concentrations were observed for the workers involved in nickel powder packing (GM = 0.77 mg m(-3)), although the soluble component comprised only 2% of the total nickel content. The highest airborne soluble nickel exposures were associated with refineries using electrolytic processes for nickel recovery (GM = 0.04 mg m(-3) total nickel, containing 82% soluble nickel) and those jobs involving contact with soluble nickel compounds (GM = 0.02 mg m(-3) total nickel content, containing 76% soluble nickel). The stainless steel workers were exposed to low concentrations of relatively insoluble airborne nickel species (GM = 0.03 mg m(-3) total nickel, containing 1% soluble nickel). A statistically significant correlation was observed between dermal exposures for all anatomical areas across all tasks. In addition, the dermal and inhalable (total) nickel exposures were similarly associated. Overall, dermal exposures to nickel, nickel compounds, and nickel alloys were relatively low. However, exposures were highly variable, which can be explained by the inconsistent use of personal protective equipment, varying working practices, and different standards of automation and engineering controls within each exposure category.

Temperature effect on nickel release in ammonium citrate

Leaching in ammonium citrate has been extensively used to assess the fraction of water-soluble nickel compounds present in nickel producing and using workplace aerosols. Leaching in ammonium citrate according to the first step of the Zatka protocol was found to overestimate the water-soluble nickel fraction by more than ten-fold compared to synthetic lung fluid (37 degrees C), when nickel carbonate and subsulfide were present. These results suggest that exposure matrices based on this method should be reexamined. Leaching studies of refinery particles are needed to further clarify this important issue.