Magnesium-oxide-enhanced bone regeneration: 3D-printing of gelatin-coated composite scaffolds with sustained Rosuvastatin release

Critical-size bone defects are one of the main challenges in bone tissue regeneration that determines the need to use angiogenic and osteogenic agents. Rosuvastatin (RSV) is a class of cholesterol-lowering drugs with osteogenic potential. Magnesium oxide (MgO) is an angiogenesis component affecting apatite formation. This study aims to evaluate 3D-printed Polycaprolactone/β-tricalcium phosphate/nano-hydroxyapatite/ MgO (PCL/β-TCP/nHA/MgO) scaffolds as a carrier for MgO and RSV in bone regeneration. For this purpose, PCL/β-TCP/nHA/MgO scaffolds were fabricated with a 3D-printing method and coated with gelatin and RSV. The biocompatibility and osteogenicity of scaffolds were examined with MTT, ALP, and Alizarin red staining. Finally, the scaffolds were implanted in a bone defect of rat's calvaria, and tissue regeneration was investigated after 3 months. Our results showed that the simultaneous presence of RSV and MgO improved biocompatibility, wettability, degradation rate, and ALP activity but decreased mechanical strength. PCL/β-TCP/nHA/MgO/gelatin-RSV scaffolds produced sustained release of MgO and RSV within 30 days. CT images showed that PCL/β-TCP/nHA/MgO/gelatin-RSV scaffolds filled approximately 86.83 + 4.9 % of the defects within 3 months and improved angiogenesis, woven bone, and osteogenic genes expression. These results indicate the potential of PCL/β-TCP/nHA/MgO/gelatin-RSV scaffolds as a promising tool for bone regeneration and clinical trials.

Constructing ECM-like Structure on the Plasma Membrane via Peptide Assembly to Regulate the Cellular Response

This feature article introduces the design of self-assembling peptides that serve as the basic building blocks for the construction of extracellular matrix (ECM)-like structure in the vicinity of the plasma membrane. By covalently conjugating a bioactive motif, such as membrane protein binding ligand or enzymatic responsive building block, with a self-assembling motif, especially the aromatic peptide, a self-assembling peptide that retains bioactivity is obtained. Instructed by the target membrane protein or enzyme, the bioactive peptides self-assemble into ECM-like structure exerting various stimuli to regulate the cellular response via intracellular signaling, especially mechanotransduction. By briefly summarizing the properties and applications (e.g., wound healing, controlling cell motility and cell fate) of these peptides, we intend to illustrate the basic requirements and promises of the peptide assembly as a true bottom-up approach in the construction of artificial ECM.

Jellyfish mucin (qniumucin) extracted with a modified protocol indicated its existence as a constituent of the extracellular matrix

Jellyfish (JF) mucin (precisely, a mucin-type glycoprotein named qniumucin: Q-mucin) first discovered in JF is mainly composed of highly O-glycosylated domains, and its unique structure suggests its wide applications as a smart material. In this study, the standard protocol used to date was thoroughly reinvestigated because the processing of raw JF was rather difficult and continuous production from frozen sources was also indispensable. Finally, we concluded that Q-mucin is involved not in mucus but in the mesoglea, i.e., the extracellular matrix (ECM), as a part of a very large polymer complex. We added a treatment procedure with a chelate reagent (e.g. EDTA) to inactivate endogenous proteases that induce the spontaneous decomposition of the collagens in ECM. The amino acid composition (AAC) of each precipitate formed upon EtOH addition indicated that Q-mucin dissociates from the biopolymer complex as a constituent highly soluble in deionized water. Since the remaining portion of ECM still seemed to contain a large amount of the precursor of Q-mucin even after the extraction with water is completed, the yield of Q-mucin is expected to increase markedly if an innovative method to decompose EtOH precipitates is developed. The existence of Q-mucin in ECM seems to be described in parallel with that of proteoglycans (PG) in mammalian cartilage because they resemble each other.

Air pollution particles hijack peroxidasin to disrupt immunosurveillance and promote lung cancer

Although fine particulate matter (FPM) in air pollutants and tobacco smoke is recognized as a strong carcinogen and global threat to public health, its biological mechanism for inducing lung cancer remains unclear. Here, by investigating FPM's bioactivities in lung carcinoma mice models, we discover that these particles promote lung tumor progression by inducing aberrant thickening of tissue matrix and hampering migration of antitumor immunocytes. Upon inhalation into lung tissue, these FPM particles abundantly adsorb peroxidasin (PXDN) - an enzyme mediating type IV collagen (Col IV) crosslinking - onto their surface. The adsorbed PXDN exerts abnormally high activity to crosslink Col IV via increasing the formation of sulfilimine bonds at the NC1 domain, leading to an overly dense matrix in the lung tissue. This disordered structure decreases the mobility of cytotoxic CD8+ T lymphocytes into the lung and consequently impairs the local immune surveillance, enabling the flourishing of nascent tumor cells. Meanwhile, inhibiting the activity of PXDN abolishes the tumor-promoting effect of FPM, indicating the key impact of aberrant PXDN activity on the tumorigenic process. In summary, our finding elucidates a new mechanism for FPM-induced lung tumorigenesis and identifies PXDN as a potential target for treatment or prevention of the FPM-relevant biological risks.

Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics

Polymeric hydrogels are fascinating platforms as 3D scaffolds for tissue repair and delivery systems of therapeutic molecules and cells. Among others, methacrylated gelatin (GelMA) has become a representative hydrogel formulation, finding various biomedical applications. Recent efforts on GelMA-based hydrogels have been devoted to combining them with bioactive and functional nanomaterials, aiming to provide enhanced physicochemical and biological properties to GelMA. The benefits of this approach are multiple: i) reinforcing mechanical properties, ii) modulating viscoelastic property to allow 3D printability of bio-inks, iii) rendering electrical/magnetic property to produce electro-/magneto-active hydrogels for the repair of specific tissues (e.g., muscle, nerve), iv) providing stimuli-responsiveness to actively deliver therapeutic molecules, and v) endowing therapeutic capacity in tissue repair process (e.g., antioxidant effects). The nanomaterial-combined GelMA systems have shown significantly enhanced and extraordinary behaviors in various tissues (bone, skin, cardiac, and nerve) that are rarely observable with GelMA. Here we systematically review these recent efforts in nanomaterials-combined GelMA hydrogels that are considered as next-generation multifunctional platforms for tissue therapeutics. The approaches used in GelMA can also apply to other existing polymeric hydrogel systems.

Regulated Surface Morphology of Polyaniline/Polylactic Acid Composite Nanofibers via Various Inorganic Acids Doping for Enhancing Biocompatibility in Tissue Engineering

Conductive and degradable nanofibrous scaffolds have great potential in promoting cell growth, proliferation, and differentiation under an external electric field. Although the issue of inferior electrical conductivity in body fluids still exists, polyaniline (PANI)-based degradable nanofibers can promote cell adhesion, growth, and proliferation. To investigate whether the effect is caused by the PANI morphology, we selected three inorganic acids as dopants in the process of PANI in situ oxidative polymerization: hydrochloric acid, sulfuric acid, and perchloric acid. The obtained polyaniline/polylactic acid (PANI/PLA) composite nanofibers were characterized via SEM, FTIR, and XPS analysis, and we confirmed that the PLA nanofibers were successfully coated by PANI without any change to the porous structure of the PLA nanofibers. The in vitro mechanical properties and degradability indicated that the oxidation of acid dopants should be considered and that it was likely to have a higher oxidation degradation effect on PLA nanofibers. The contact angle test demonstrated that PANI/PLA composite nanofibers with different surface morphologies have good wettability, implying that they meet the requirements of bone tissue engineering scaffolds. The surface roughness and cell viability demonstrated that different PANI morphologies on the surface can promote cell proliferation. The higher the surface roughness of the PANI, the better the biocompatibility. Consequently, the regulated surface morphology of PANI/PLA composite nanofibers via different acids doping has positive effect on biocompatibility in tissue engineering.

Small Physical Cross-Linker Facilitates Hyaluronan Hydrogels

In this study, we demonstrate that small charged molecules (NH₄⁺, GluA⁺, dHA⁺) can form physical cross-links between hyaluronan chains, facilitating polymerization reactions between synthetically introduced thiol groups (HA-DTPH). These hybrid hydrogels can be obtained under physiological conditions ideally suited for 3D cell culture systems. The type and concentration of a physical crosslinker can be adjusted to precisely tune mechanical properties as well as degradability of the desired hydrogel system. We analyze the influence of hydrogen bond formation, concentration and additional ionic interactions on the polymerization reaction of HA-DTPH hydrogels and characterize the resulting hydrogels in regard to mechanical and biocompatibility aspects.

Graphene oxide/alginate/silk fibroin composite as a novel bionanostructure with improved blood compatibility, less toxicity and enhanced mechanical properties

For biomedical applications, the design and synthesis of biocompatible nanostructures, are considered as critical challenges. In this study, graphene oxide (GO) was covalently modified by natural sodium alginate (Alg) polymer. By adding silk fibroin (SF) to this nanostructure, a hybrid nanobiocomposite (GO/Alg/SF) was resulted and its unique features were determined using FT-IR, EDX, FE-SEM, XRD and TG analyses. Because of using less toxic and high biocompatible materials, specific biological results were achieved. The cell viability of this novel nanostructure was 89.2 % and its hemolytic effect was less than 6% while the highest concentration (1000 μg/mL) of this nanostructure was chosen for these purposes. Also, high mechanical properties including the compressive strength (0.87 ± 0.034 (MPa)) and the compressive modulus (2.25 ± 0.091 (MPa)) were exposed. This nanostructure can be considered as a scaffold for wound dressing applications due to the mentioned properties.

A Hybrid Model of Cartilage Regeneration Capturing the Interactions Between Cellular Dynamics and Porosity

To accelerate the development of strategies for cartilage tissue engineering, models are necessary to investigate the interactions between cellular dynamics and the local microenvironment. We use a discrete framework to capture the individual behavior of cells, modeling experiments where cells are seeded in a porous scaffold or hydrogel and over the time course of a month, the scaffold slowly degrades while cells divide and synthesize extracellular matrix constituents. The movement of cells and the ability to proliferate is a function of the local porosity, defined as the volume fraction of fluid in the surrounding region. A phenomenological approach is used to capture a continuous profile for the degrading scaffold and accumulating matrix, which will then change the local porosity throughout the construct. We parameterize the model by first matching total cell counts in the construct to chondrocytes seeded in a polyglycolic acid scaffold (Freed et al. in Biotechnol Bioeng 43:597-604, 1994). We investigate the influence of initial scaffold porosity on the total cell count and spatial profiles of cell and ECM in the construct. Cell counts were higher at day 30 in scaffolds of lower initial porosity, and similar cell counts were obtained using different models of scaffold degradation and matrix accumulation (either uniform or cell-specific). Using this modeling framework, we study the interplay between a phenomenological representation of scaffold architecture and porosity as well as the potential continuous application of growth factors. We determine parameter regimes where large cellular aggregates occur, which can hinder matrix accumulation and cellular proliferation. The developed modeling framework can easily be extended and can be used to identify optimal scaffolds and culture conditions that lead to a desired distribution of extracellular matrix and cell counts throughout the construct.

Fabrication and functionalization of 3D-printed soft and hard scaffolds with growth factors for enhanced bioactivity

Strategies to improve the acceptance of scaffolds by the body is crucial in tissue engineering (TE) which requires tailoring of the pore structure, mechanical properties and surface characteristics of the scaffolds. In the current study we used a 3-dimensional (3D) printing technique to tailor the pore structure and mechanical properties of (i) nanocellulose based hydrogel scaffolds for soft tissue engineering and (ii) poly lactic acid (PLA) based scaffolds for hard tissue engineering in combination with surface treatment by protein conjugation for tuning the scaffold bioactivity. Dopamine coating of the scaffolds enhanced the hydrophilicity and their capability to bind bioactive molecules such as fibroblast growth factor (FGF-18) for soft TE scaffolds and arginyl glycyl aspartic acid (RGD) peptide for hard TE scaffolds, which was confirmed using MALDI-TOFs. This functionalization approach enhanced the performance of the scaffolds and provided antimicrobial activity indicating that these scaffolds can be used for cartilage or bone regeneration applications. Blood compatibility studies revealed that both the materials were compatible with human red blood cells. Significant enhancement of cell attachment and proliferation confirmed the bioactivity of growth factor functionalized 3D printed soft and hard tissues. This approach of combining 3D printing with biological tuning of the interface is expected to significantly advance the development of biomedical materials related to soft and hard tissue engineering.

3D printed scaffolds with tailored bioactivity using protein conjugation.

Tissue-derived decellularized extracellular matrices toward cartilage repair and regeneration

The inability of cartilage tissue to self-heal due to its avascular nature often leads to conditions such as osteoarthritis, traumatic rupture of cartilage, and osteochondrosis. The cartilage provides cushioning effects between the joints and avoids bone frictions. The extracellular matrix (ECM) of cartilage consists predominantly of collagens, elastin, proteoglycans and glycoproteins. A number of tissue engineered ECM derived biological scaffolds and matrices are available for cartilage regeneration. The decellularized tissues provide appropriate bioactive cues in the absence of cellular components, hence avoiding immunological issue. However, the decellularization process involves several cellular disruption techniques that may alter the ECM architecture affecting bioactivity. Therefore, development of cell-free cartilage biomaterials with unaltered ECM integrity and bioactivity is of paramount necessity by smart selection of modified techniques and agents. Herein, we described about various decellularization methods, agents, techniques, and their applications in tissue/cartilage decellularization. It also contemplates various difficulties and future perspectives to troubleshoot the existing obstructions in tissue-derived cartilage matrices and their applications.

Printability of pulp derived crystal, fibril and blend nanocellulose-alginate bioinks for extrusion 3D bioprinting

BACKGROUND

One of the main challenges for extrusion 3D bioprinting is the identification of non-synthetic bioinks with suitable rheological properties and biocompatibility. Our aim was to optimize and compare the printability of crystal, fibril and blend formulations of novel pulp derived nanocellulose bioinks and assess biocompatibility with human nasoseptal chondrocytes.

METHODS

The printability of crystalline, fibrillated and blend formulations of nanocellulose was determined by assessing resolution (grid-line assay), post-printing shape fidelity and rheology (elasticity, viscosity and shear thinning characteristics) and compared these to pure alginate bioinks. The optimized nanocellulose-alginate bioink was bioprinted with human nasoseptal chondrocytes to determine cytotoxicity, metabolic activity and bioprinted construct topography.

RESULTS

All nanocellulose-alginate bioink combinations demonstrated a high degree of shear thinning with reversible stress softening behavior which contributed to post-printing shape fidelity. The unique blend of crystal and fibril nanocellulose bioink exhibited nano- as well as micro-roughness for cellular survival and differentiation, as well as maintaining the most stable construct volume in culture. Human nasoseptal chondrocytes demonstrated high metabolic activity post printing and adopted a rounded chondrogenic phenotype after prolonged culture.

CONCLUSIONS

This study highlights the favorable rheological, swelling and biocompatibility properties of nanocellulose-alginate bioinks for extrusion-based bioprinting.

3D hierarchical scaffolds enabled by a post-patternable, reconfigurable, and biocompatible 2D vitrimer film for tissue engineering applications

A mechanically tissue-like, biocompatible vitrimer yields 3D hierarchical tissue engineering scaffolds via hot embossing patterning and additional reconfiguration processes.

Assembly and Self-Assembly of Nanomembrane Materials-From 2D to 3D

Nanoscience and nanotechnology offer great opportunities and challenges in both fundamental research and practical applications, which require precise control of building blocks with micro/nanoscale resolution in both individual and mass-production ways. The recent and intensive nanotechnology development gives birth to a new focus on nanomembrane materials, which are defined as structures with thickness limited to about one to several hundred nanometers and with much larger (typically at least two orders of magnitude larger, or even macroscopic scale) lateral dimensions. Nanomembranes can be readily processed in an accurate manner and integrated into functional devices and systems. In this Review, a nanotechnology perspective of nanomembranes is provided, with examples of science and applications in semiconductor, metal, insulator, polymer, and composite materials. Assisted assembly of nanomembranes leads to wrinkled/buckled geometries for flexible electronics and stacked structures for applications in photonics and thermoelectrics. Inspired by kirigami/origami, self-assembled 3D structures are constructed via strain engineering. Many advanced materials have begun to be explored in the format of nanomembranes and extend to biomimetic and 2D materials for various applications. Nanomembranes, as a new type of nanomaterials, allow nanotechnology in a controllable and precise way for practical applications and promise great potential for future nanorelated products.

Biofunctionalized and self-supported polypyrrole frameworks as nanostructured ECM-like biointerfaces

Hybrid nanobiointerfaces were designed as an original contribution to the challenge of synthesizing nanostructured biomaterials integrating a set of cell fate-determining cues, originally provided to cells by the extracellular matrix (ECM). The produced biointerfaces consist of a stiff framework of intersected polypyrrole (PPy) nanotubes supporting a soft multilayer composed of ECM-derived biomacromolecules: collagen (Col) and hyaluronic acid (HA). PPy frameworks with highly tunable characteristics were synthesized through chemical oxidative polymerization of pyrrole monomers, templated within track-etched polycarbonate (PC) membranes featuring a network of intersected nanopores. PPy interfaces with a porosity of 80%, composed of nanotubes with an average diameter ranging from 40 to 300 nm, intersecting at an angle of 90°, were shown to be self-supported. These rigid PPy nanostructured interfaces were functionalized with a self-assembling (HA/Col) multilayer deposited via a layer-by-layer process. Biofunctionalized and unmodified PPy frameworks were both shown to promote sustained cell adhesion, therefore demonstrating the cytocompatibility of the engineered matrices. Such nanobiointerfaces, combining a mechanically-stable framework of tunable dimensions with a soft biopolymeric multilayer of highly versatile nature, pave the way towards cell-instructive biomaterials able to gather a wide range of cues guiding cell behavior. The developed self-supported structures could be used as a coating or as membranes bridging different tissues.

A versatile template-based approach allows for the synthesis of nanostructured biointerfaces, made of core–shell nanotubes, combining bioactivity and mechanical stability.

The Components of Bone and What They Can Teach Us about Regeneration

The problem of bone regeneration has engaged both physicians and scientists since the beginning of medicine. Not only can bone heal itself following most injuries, but when it does, the regenerated tissue is often indistinguishable from healthy bone. Problems arise, however, when bone does not heal properly, or when new tissue is needed, such as when two vertebrae are required to fuse to stabilize adjacent spine segments. Despite centuries of research, such procedures still require improved therapeutic methods to be devised. Autologous bone harvesting and grafting is currently still the accepted benchmark, despite drawbacks for clinicians and patients that include limited amounts, donor site morbidity, and variable quality. The necessity for an alternative to this "gold standard" has given rise to a bone-graft and substitute industry, with its central conundrum: what is the best way to regenerate bone? In this review, we dissect bone anatomy to summarize our current understanding of its constituents. We then look at how various components have been employed to improve bone regeneration. Evolving strategies for bone regeneration are then considered.

Development of a Micronized Meniscus Extracellular Matrix Scaffold for Potential Augmentation of Meniscal Repair and Regeneration

Decellularized scaffolds composed of extracellular matrix (ECM) hold promise for repair and regeneration of the meniscus, given the potential for ECM-based biomaterials to aid in stem cell recruitment, infiltration, and differentiation. The objectives of this study were to decellularize canine menisci to fabricate a micronized, ECM-derived scaffold and to determine the cytocompatibility and repair potential of the scaffold ex vivo. Menisci were decellularized with a combination of physical agitation and chemical treatments. For scaffold fabrication, decellularized menisci were cryoground into a powder and the size and morphology of the ECM particles were evaluated using scanning electron microscopy. Histologic and biochemical analyses of the scaffold confirmed effective decellularization with loss of proteoglycan from the tissue but no significant reduction in collagen content. When washed effectively, the decellularized scaffold was cytocompatible to meniscal fibrochondrocytes, synoviocytes, and whole meniscal tissue based on the resazurin reduction assay and histologic evaluation. In an ex vivo model for meniscal repair, radial tears were augmented with the scaffold delivered with platelet-rich plasma as a carrier, and compared to nonaugmented (standard-of-care) suture techniques. Histologically, there was no evidence of cellular migration or proliferation noted in any of the untreated or standard-of-care treatment groups after 40 days of culture. Conversely, cellular infiltration and proliferation were noted in scaffold-augmented repairs. These data suggest the potential for the scaffold to promote cellular survival, migration, and proliferation ex vivo. Further investigations are necessary to examine the potential for the scaffold to induce cellular differentiation and functional meniscal fibrochondrogenesis.

Modulation of human mesenchymal stem cell survival on electrospun mesh with co-immobilized epithelial growth factor and gelatin

Co-immobilization of EGF and gelatin on a fibrous mesh promotes spreading and viability of hMSC, and coupled EGF involves involucrin expression and procollagen secretion, indicating trans-differentiation to keratinocyte-like cell.

Engineered ECM-like microenvironment with fibrous particles for guiding 3D-encapsulated hMSC behaviours

The incorporation of RGD-coupled fibrous particles into the alginate hydrogel promotes 3D-encapsulated cell behaviours by allowing mutual binding with the particles.

Effect of structure, topography and chemistry on fibroblast adhesion and morphology

Surface biofunctionalisation of many biodegradable polymers is one of the used strategies to improve the biological activity of such materials. In this work, the introduction of collagen type I over the surface of a biodegradable polymer (poly lactic acid) processed in the forms of films and fibers leads to an enhancing of the cellular adhesion of human dermal fibroblast when compared to unmodified polymer and biomolecule-physisorbed polymer surface. The change of topography of the material does not affect the cellular adhesion but results in a higher proliferation of the fibroblast cultured over the fibers. Moreover, the difference of topography governs the cellular morphology, i.e. cells adopt a more stretched conformation where cultured over the films while a more elongated with lower area morphology are obtained for the cells grown over the fibers. This study is relevant for designing and modifying different biodegradable polymers for their use as scaffolds for different applications in the field of Tissue Engineering and Regenerative Medicine.

Thixotropic silk nanofibril-based hydrogel with extracellular matrix-like structure

We present an injectable hydrogel based on silk fibroin (SF) nanofibrils which may offer benefits for cell encapsulation and delivery.

Synthesis and characterization of protected oligourethanes as crosslinkers of collagen-based scaffolds

This paper describes the preparation and characterization of water-soluble urethane oligomers bearing protected isocyanate groups. It also points out its ability to crosslink decellularized pericardium.

Engineered nanomembranes for directing cellular organization toward flexible biodevices

Controlling the cellular microenvironment can be used to direct the cellular organization, thereby improving the function of synthetic tissues in biosensing, biorobotics, and regenerative medicine. In this study, we were inspired by the microstructure and biological properties of the extracellular matrix to develop freestanding ultrathin polymeric films (referred as "nanomembranes") that were flexible, cell adhesive, and had a morphologically tailorable surface. The resulting nanomembranes were exploited as flexible substrates on which cell-adhesive micropatterns were generated to align C2C12 skeletal myoblasts and embedded fibril carbon nanotubes enhanced the cellular elongation and differentiation. Functional nanomembranes with tunable morphology and mechanical properties hold great promise in studying cell-substrate interactions and in fabricating biomimetic constructs toward flexible biodevices.

Materiomics: an -omics approach to biomaterials research

The past fifty years have seen a surge in the use of materials for clinical application, but in order to understand and exploit their full potential, the scientific complexity at both sides of the interface--the material on the one hand and the living organism on the other hand--needs to be considered. Technologies such as combinatorial chemistry, recombinant DNA as well as computational multi-scale methods can generate libraries with a very large number of material properties whereas on the other side, the body will respond to them depending on the biological context. Typically, biological systems are investigated using both holistic and reductionist approaches such as whole genome expression profiling, systems biology and high throughput genetic or compound screening, as already seen, for example, in pharmacology and genetics. The field of biomaterials research is only beginning to develop and adopt these approaches, an effort which we refer to as "materiomics". In this review, we describe the current status of the field, and its past and future impact on the biomedical sciences. We outline how materiomics sets the stage for a transformative change in the approach to biomaterials research to enable the design of tailored and functional materials for a variety of properties in fields as diverse as tissue engineering, disease diagnosis and de novo materials design, by combining powerful computational modelling and screening with advanced experimental techniques.

Advances in biomimetic regeneration of elastic matrix structures

Elastin is a vital component of the extracellular matrix, providing soft connective tissues with the property of elastic recoil following deformation and regulating the cellular response via biomechanical transduction to maintain tissue homeostasis. The limited ability of most adult cells to synthesize elastin precursors and assemble them into mature crosslinked structures has hindered the development of functional tissue-engineered constructs that exhibit the structure and biomechanics of normal native elastic tissues in the body. In diseased tissues, the chronic overexpression of proteolytic enzymes can cause significant matrix degradation, to further limit the accumulation and quality (e.g., fiber formation) of newly deposited elastic matrix. This review provides an overview of the role and importance of elastin and elastic matrix in soft tissues, the challenges to elastic matrix generation in vitro and to regenerative elastic matrix repair in vivo, current biomolecular strategies to enhance elastin deposition and matrix assembly, and the need to concurrently inhibit proteolytic matrix disruption for improving the quantity and quality of elastogenesis. The review further presents biomaterial-based options using scaffolds and nanocarriers for spatio-temporal control over the presentation and release of these biomolecules, to enable biomimetic assembly of clinically relevant native elastic matrix-like superstructures. Finally, this review provides an overview of recent advances and prospects for the application of these strategies to regenerating tissue-type specific elastic matrix structures and superstructures.

Nanofibrillar cellulose hydrogel promotes three-dimensional liver cell culture

Over the recent years, various materials have been introduced as potential 3D cell culture scaffolds. These include protein extracts, peptide amphiphiles, and synthetic polymers. Hydrogel scaffolds without human or animal borne components or added bioactive components are preferred from the immunological point of view. Here we demonstrate that native nanofibrillar cellulose (NFC) hydrogels derived from the abundant plant sources provide the desired functionalities. We show 1) rheological properties that allow formation of a 3D scaffold in-situ after facile injection, 2) cellular biocompatibility without added growth factors, 3) cellular polarization, and 4) differentiation of human hepatic cell lines HepaRG and HepG2. At high shear stress, the aqueous NFC has small viscosity that supports injectability, whereas at low shear stress conditions the material is converted to an elastic gel. Due to the inherent biocompatibility without any additives, we conclude that NFC generates a feasible and sustained microenvironment for 3D cell culture for potential applications, such as drug and chemical testing, tissue engineering, and cell therapy.

Liver progenitor cell interactions with the extracellular matrix

Liver progenitor cells (LPCs) are a promising source of cells to treat liver disease by cell therapy, due to their capability for self-replication and bipotentiality. In order to establish useful culture systems of LPCs and apply them to future clinical therapies, it is necessary to understand their interactions with their microenvironment and especially with the extracellular matrix (ECM). There is considerable evidence from in vivo studies that matrix proteins affect the activation, expansion, migration and differentiation of LPCs, but the information on the role that specific ECMs play in regulating LPCs in vitro is more limited. Nevertheless, current studies suggest that laminin, collagen type III, collagen type IV and hyaluronic acid help to maintain the undifferentiated phenotype of LPCs and promote their proliferation when cultured in media supplemented with growth factors chosen for LPC expansion, whereas collagen type I and fibronectin are generally associated with a differentiated phenotype under the same conditions. Experimental evidence suggests that α6β1 and α5β1 integrins as well as CD44 on the surface of LPCs, and their related downstream signals, are important mediators of interactions between LPCs and the ECM. The interactions of LPCs with the ECM form the focus of this review and the contribution of ECM molecules to strategies for optimizing in vitro LPC cultures for therapeutic applications is discussed.

Self-assembly of collagen-mimetic peptide amphiphiles into biofunctional nanofiber

Molecular assembly of protein and peptide is highly specific and frequently occurs in biological systems. Collagen, which is the most abundant component in extracellular matrix, can assemble into fiber and play an essential role in cell adhesion and growth. Since native collagen is difficult to modify and can engender pathogenic and immunological side effects, its application on tissue regeneration is limited. The preparation of collagen-mimetic materials, hence, is gaining interest in the field of tissue regeneration. Collagen peptides have been synthesized to mimic some properties of collagen, such as its triple helix. However, few studies have been done to prepare artificial collagen fiber to mimic its high-level structure and biofunctions. In this work, a novel collagen-mimetic peptide amphiphile (CPA) was prepared by conjugating a single hydrophobic tail with a collagen-mimetic peptide, supplemented with bioactive glycine-phenylalanine-hydroxyproline-glycine-glutamate-arginine (GFOGER). The physical studies indicated that the CPA had a collagen-mimetic triple-helical conformation and was able to self-assemble into nanofiber. In addition, the CPA conjugated with the integrin-specific GFOGER sequence was shown to promote collagen-mimetic cell adhesion and development. The self-assembled peptide nanofiber was shown to have the ability to structurally and biologically mimic native collagen fiber. We anticipate that this artificial collagen fiber holds great potential as collagen-mimetic materials for tissue regeneration applications.

Heterofunctional nanosheet controlling cell adhesion properties by collagen coating

Recently, biomaterials have been widely used in a variety of medical applications. We previously reported that a poly-l-lactic acid (PLLA) nanosheet shows anti-adhesive properties and constitutes a useful biomaterial for preventing unwanted wound adhesion in surgical operations. In this article, we examine whether the PLLA nanosheet can be specifically modified with biomacromolecules on one surface only. Such an approach would endow each side of the nanosheet with discrete functions, that is anti-adhesive and pro-healing properties. We fabricated two distinct PLLA nanosheets: (i) collagen cast on the surface of a PLLA nanosheet (Col-Cast-PLLA) and (ii) collagen spin-coated on the nanosheet (Col-Spin-PLLA). In the Col-Spin-PLLA nanosheet, the collagen layer had a thickness of 5–10 nm on the PLLA surface and displayed increased hydrophilicity compared to both PLLA and Col-Cast-PLLA nanosheets. In addition, atomic force microscopy showed disorganized collagen fibril formation on the PLLA layer when covered using the spin-coating method, while apparent bundle formations of collagen were formed in the Col-Cast-PLLA nanosheet. The Col-Spin-PLLA nanosheet provided a microenvironment for cells to adhere and spread. By contrast, the Col-Cast-PLLA nanosheet displayed reduced cell adhesion compared to the Col-Spin-PLLA nanosheet. Consistent with these findings, immunocytochemical analysis clearly showed fine networks of actin filaments in cells cultured on the Col-Spin-PLLA, but not the Col-Cast-PLLA nanosheet. Therefore, the Col-Spin-PLLA nanosheet was shown to be more suitable for acting as a scaffold. In conclusion, we have succeeded in developing a heterofunctional nanosheet comprising a collagen modified side, which has the ability to rapidly adhere cells, and an unmodified side, which acts as an adhesion barrier, by using a spin-coating technique.

Designing poly[(R)-3-hydroxybutyrate]-based polyurethane block copolymers for electrospun nanofiber scaffolds with improved mechanical properties and enhanced mineralization capability

Efforts to mineralize electrospun hydrophobic polyester scaffold often require prior surface modification such as plasma or alkaline treatment, which may affect the mechanical integrity of the resultant scaffold. Here through rational design we developed a series of polyurethane block copolymers containing poly[(R)-3-hydroxybutyrate] (PHB) as hard segment and poly(ethylene glycol) (PEG) as soft segment that could be easily fabricated into mineralizable electrospun scaffold without the need of additional surface treatment. To ensure that the block copolymers do not swell excessively in water, PEG content in the polymers was kept below 50 wt %. To obtain good dry and hydrated state mechanical properties with limited PEG, low-molecular-weight PHB-diol with M(n) 1230 and 1790 were used in various molar feed ratios. The macromolecular characteristics of the block copolymers were confirmed by (1)H NMR spectroscopy, gel permeation chromatography (GPC), and thermal gravimetric analyses (TGA). With the incorporation of the hydrophilic PEG segments, the surface and bulk hydrophilicity of the block copolymers were significantly improved. Differential scanning calorimetry (DSC) revealed that the block copolymers had low PHB crystallinity and no PEG crystallinity. This was further confirmed by X-ray diffraction analyses (XRD) in both dry and hydrated states. With short PHB segments and soft PEG coupled together, the block copolymers were no longer brittle. Tensile measurements showed that the block copolymers with higher PEG content or shorter PHB segments were more ductile. Furthermore, their ductility was enhanced in hydrated states with one particular example showing increment in strain at break from 1090 to 1962%. The block copolymers were fabricated into an electrospun fibrous scaffold that was easily mineralized by simple incubation in simulated body fluid. The materials have good potential for bone regeneration application and may be extended to other applications by simply coating them with other biologically active substances.