Defect Engineering of High-Entropy Oxides for Superior Catalytic Oxidation Performance

High-entropy oxides (HEOs) are crucial in various fields (power storage/conversion, electronic devices, and catalysis) owing to their adjustable structural characteristics, fabulous stability, and massive components. However, the current strategies for synthesizing HEOs suffer from low surface area and limited active sites. Herein, we present a salt-assisted strategy with remarkable universality for the preparation of HEOs with high surface area [e.g., HP-(FeCrCoNiCu)xOy: 59 m2/g, HP-(ZnMgNiCuCo)xOy: 49 m2/g, and HP-(CrMnFeNiZn)xOy: 11 m2/g], where HP means high porosity. Especially, HP-(FeCrCoNiCu)xOy with rich-oxygen vacancies promotes catalytic efficiency for hydrocarbon and alcohol oxidation owing to its hierarchical texture and massive oxygen vacancies. Furthermore, density functional theory is utilized to well illustrate the relationship of the structure and catalytic efficiency within the catalysts. This work offers realistic pathway for the large-scale application of HEOs in catalytic areas.

Impact of the Experimental Parameters on Catalytic Activity When Preparing Polymer Protected Bimetallic Nanoparticle Catalysts on Activated Carbon

Sol immobilization is used to produce bimetallic catalysts with higher activity to monometallic counterparts for a wide range of environmental and commercial catalytic transformations. Analysis of complementary surface characterization (XPS, Boehm's titration, and zeta potential measurements) was used to elucidate alterations in the surface functionality of two activated carbon supports during acid exposure. When considered in parallel to the experimentally determined electrostatic and conformational changes of the polymer surrounding the nanoparticles, an electrostatic model is proposed describing polymer protected nanoparticle deposition with several polymer-carbon support examples described. Consideration of the electrostatic interactions ensures full deposition of the polymer protected nanoparticles and at the same time influences the structure of the bimetallic nanoparticle immobilized on the support. The normalized activity of AuPd catalysts prepared with 133 ppm H₂SO₄ has a much higher activity for the direct synthesis of hydrogen peroxide compared to catalysts prepared in the absence of acid. Detailed characterization by XPS indicates that the surface becomes enriched in Au in the Au-Pd samples prepared with acid, suggesting an improved dispersion of smaller bimetallic nanoparticles, rich in Au, that are known to be highly active for the direct synthesis reaction. Subsequent microscopy measurements confirmed this hypothesis, with the acid addition catalysts having a mean particle size ∼2 nm smaller than the zero acid counterparts. The addition of acid did not result in a morphology change, and random alloyed bimetallic AuPd nanoparticles were observed in catalysts prepared by sol immobilization in the presence and absence of acid. This work shows that the deposition of polymer protected AuPd nanoparticles onto activated carbon is heavily influenced by the acid addition step in the sol immobilization process. The physicochemical properties of both the polymer and the activated carbon support should be considered when designing a bimetallic nanoparticle catalyst by sol immobilization to ensure the optimum performance of the final catalyst.

Gold Nanoparticles as Efficient Catalysts in Organic Transformations

This review summarizes the utilization of gold nanoparticles as efficient catalysts for a variety of chemical transformations like oxidation, hydrogenation, and coupling reactions as compared to conventional catalytic materials. This review explores the gold nanoparticles-based catalysts for the liquid phase chemo-selective organic transformations which are proving to be evergreen reactions and have importance for industrial applications. Apart from organic transformation reactions, gold nanoparticles have been found to be applicable in removing the atmospheric contaminants and improving the efficiency of the fuel cells by removing the impurities of carbon monoxide.

Hydrogen Peroxide as a Green Oxidant for the Selective Catalytic Oxidation of Benzylic and Heterocyclic Alcohols in Different Media: An Overview

Among a plethora of known and established oxidant in organic chemistry, hydrogen peroxide stands in a special position. It is commercially and inexpensively available, highly effective, selective, and more importantly it is compatible with current environmental concerns, dictated by principles of green chemistry. Several chemicals or their intermediates that are important in our daily life such as pharmaceuticals, flavors, fragrances, etc. are products of oxidation of alcohols. In this review, we introduce hydrogen peroxide as an effective, selective, green and privileged oxidant for the catalyzed oxidation of primary and secondary benzylic and heterocyclic alcohols to corresponding carbonyl compounds in different media such as aqueous media, under solvent-free conditions, various organic solvent, and dual-phase system.

Preformed Pd-Based Nanoparticles for the Liquid Phase Decomposition of Formic Acid: Effect of Stabiliser, Support and Au–Pd Ratio

Hydrogen is one of the most promising energy carriers for the production of electricity based on fuel cell hydrogen technology. Recently, hydrogen storage chemicals, such as formic acid, have been proposed to be part of the long-term solution towards hydrogen economy for the future of our planet. Herein we report the synthesis of preformed Pd nanoparticles using colloidal methodology varying a range of specific experimental parameters, such as the amount of the stabiliser and reducing agent, nature of support and Pd loading of the support. The aforementioned parameters have shown to affect mean Pd particle size, Pd oxidation, atomic content of Pd on the surface as well as on the catalytic performance towards formic acid decomposition. Reusability studies were carried out using the most active monometallic Pd material with a small loss of activity after five uses. The catalytic performance based on the Au–Pd atomic ratio was evaluated and the optimum catalytic performance was found to be with the Au/Pd atomic ratio of 1/3, indicating that the presence of a small amount of Pd is essential to promote significantly Au activity for the liquid phase decomposition of formic acid. Thorough characterisation has been carried out by means of XPS, SEM-EDX, TEM and BET. The observed catalytic performance is discussed in terms of the structure/morphology and composition of the supported Pd and Au–Pd nanoparticles.

Mesoporous silica-encapsulated gold core–shell nanoparticles for active solvent-free benzyl alcohol oxidation

Silica-encapsulated gold core@shell nanoparticles (Au@SiO₂ CSNPs) were synthesized via a tunable bottom-up procedure to catalyze the aerobic oxidation of benzyl alcohol.

Enhanced catalyst selectivity in the direct synthesis of H2O2 through Pt incorporation into TiO2 supported AuPd catalysts

The introduction of low levels of Pt dopant into AuPd nanoparticles supported on TiO₂ significantly enhances their catalytic performance for the direct synthesis of H₂O₂.

Solvent-Free Catalytic Oxidation of Benzyl Alcohol over Au-Pd Bimetal Deposited on TiO2: Comparison of Rutile, Brookite, and Anatase

TiO₂ (P25)-supported Au-Pd bimetal nanoparticles displayed excellent performance in the solvent-free benzyl alcohol catalytic oxidation. However, little research attention has been paid to investigate the effects of TiO₂ form on the catalytic activity of Au-Pd/TiO₂. In the present research, rutile, brookite, and anatase TiO₂ were successfully synthesized and subsequently applied as the carrier to load Au-Pd nanoparticles by the deposition-precipitation method. The experimental results indicated that the benzyl alcohol conversion employing the rutile TiO₂-supported Au-Pd catalyst is higher than the conversion of anatase and brookite TiO₂-loaded Au-Pd catalysts. However, the Au-Pd/TiO₂-rutile displayed the lowest and highest selectivity toward benzaldehyde and toluene, respectively. ICP-AES, XRD, XPS, and TEM were conducted to characterize these catalysts. The corresponding experimental results revealed that the excellent performance of Au-Pd/TiO₂-rutile catalyst was attributed to both the smaller Au-Pd nanoparticle size distribution and the higher concentrations of O_α and Pd²⁺ species on the catalyst surface. In the recycle experiments, the Au-Pd/TiO₂-rutile catalyst displayed lower reaction stability compared with the Au-Pd/TiO₂-anatase and Au-Pd/TiO₂-brookite, which might be due to the coverage of larger amount of aldehyde products on the surface.

Pd Nanoparticles Supported on Amine-Functionalized MgAl Layered Double Hydroxides for Solvent-Free Aerobic Oxidation of Benzyl Alcohol

Pd nanoparticles (NPs) supported on amine-functionalized layered double hydroxides (LDHs) (Pd/NH2-LDH-NS) were successfully obtained by implanting aminopropyltriethoxysilane (APTS) on MgAl LDH nanosheets (LDH-NS), followed by impregnating [Pd(NH3)4]Cl2 and reduction with NaBH4. The physicochemical characteristics of the obtained Pd/NH2-LDH-NS were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR),, N2 adsorption–desorption, inductive coupled plasma (ICP), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy(XPS), and their catalytic performance was tested in the selective oxidation of benzyl alcohol with molecular oxygen under solvent-free and base-free conditions. The results showed that the implanted –NH2 groups can promote the dispersion of the supported Pd NPs via complexation of the implanted –NH2 groups to Pd NPs, and they can increase the surface basicity of the catalysts, thus enhancing the catalytic activity and selectivity to benzylaldehyde. Pd/NH2-LDH-NS exhibited enhanced catalytic activity (31.6%) and selectivity (>98%) compared to the corresponding Pd/LDH-NS, Pd/LDH, Pd/SiO2, and Pd/Al2O3. Moreover, Pd/NH2-LDH-NS was remarkably stable and could be reused at least four times without a significant loss in activity and selectivity.

Heterogeneous Gold Catalysis: From Discovery to Applications

In the present review, the important and current developments of gold catalysts for a wide range of applications are comprehensively summarized. This review also provides a detailed study of the literature data concerning the preparation, characterization, and catalytic applications of gold catalysts. Additionally, the main aspects of using supported gold nanoparticles (AuNPs) as catalysts for oxidation reactions are considered. In particular, the oxidation of benzyl alcohol to benzaldehyde and the production of adipic acid from cyclohexane are discussed in detail. Lastly, the key properties of gold catalysts are described, and an outlook on the application of gold catalysts is presented.

Synthesis of highly uniform and composition-controlled gold-palladium supported nanoparticles in continuous flow

The synthesis of supported bimetallic nanoparticles with well-defined size and compositional parameters has long been a challenge. Although batch colloidal methods are commonly used to pre-form metal nanoparticles with the desired size-range in solution, inhomogeneous mixing of the reactant solutions often leads to variations in size, structure and composition from batch-to-batch and even particle-to-particle. Here we describe a millifluidic approach for the production of oxide supported monometallic Au and bimetallic AuPd nanoparticles in a continuous fashion. This optimised method enables the production of nanoparticles with smaller mean sizes, tighter particle size distributions and a more uniform particle-to-particle chemical composition as compared to the conventional batch procedure. In addition, we describe a facile procedure to prepare bimetallic Au@Pd core-shell nanoparticles in continuous flow starting from solutions of the metal precursors. Moreover, the relative ease of scalability of this technique makes the proposed methodology appealing not only for small-scale laboratory purposes, but also for the industrial-scale production of supported metal nanoparticles.

What is the effect of Sn and Mo oxides on gold catalysts for selective oxidation of benzyl alcohol?

A series of SnO_x and MoO_x promoted gold nanoparticle catalysts were used for the aerobic oxidation of benzyl alcohol.

Selective Benzyl Alcohol Oxidation over Pd Catalysts

In the last decades, the selective liquid phase oxidation of alcohols to the corresponding carbonyl compounds has been a subject of growing interest. Research has focused on green methods that use “clean” oxidants such as O2 in combination with supported metal nanoparticles as the catalyst. Among the alcohols, benzyl alcohol is one of the most studied substrates. Indeed, benzyl alcohol can be converted to benzaldehyde, largely for use in the pharmaceutical and agricultural industries. This conversion serves as model reaction in testing new potential catalysts, that can then be applied to other systems. Pd based catalysts have been extensively studied as active catalytic metals for alcohol oxidation for their high activity and selectivity to the corresponding aldehyde. Several catalytic materials obtained by careful control of the morphology of Pd nanoparticles, (including bimetallic systems) and by tuning the support properties have been developed. Moreover, reaction conditions, including solvent, temperature, pressure and alcohol concentration have been investigated to tune the selectivity to the desired products. Different reaction mechanisms and microkinetic models have been proposed. The aim of this review is to provide a critical description of the recent advances on Pd catalyzed benzyl alcohol oxidation.

Au–Pd NPs immobilised on nanostructured ceria and titania: impact of support morphology on the catalytic activity for selective oxidation

Au–Pd colloidal NPs immobilised on ceria nanorods are highly active catalysts for selective oxidation.

The selective hydrogenation of furfural over supported palladium nanoparticle catalysts prepared by sol-immobilisation: effect of catalyst support and reaction conditions

Pd-TiO₂ nanoparticles prepared by sol-immobilisation are very active for selective hydrogenation of furfural under mild conditions, and addition of Pt enhances performance to achieve a 95% yield of tetrahydrofurfuryl alcohol.

Cinnamaldehyde hydrogenation using Au–Pd catalysts prepared by sol immobilisation

We report the catalytic performance of Au–Pd nanoparticles prepared via a sol immobilisation technique for the catalytic hydrogenation of cinnamaldehyde under mild reaction conditions.

Efficient and Highly Selective Solvent-Free Oxidation of Primary Alcohols to Aldehydes Using Bucky Nanodiamond

Selective oxidation of alcohols to aldehydes is widely applicable to the synthesis of various green chemicals. The poor chemoselectivity for complicated primary aldehydes over state-of-the-art metal-free or metal-based catalysts represents a major obstacle for industrial application. Bucky nanodiamond is a potential green catalyst that exhibits excellent chemoselectivity and cycling stability for the selective oxidation of primary alcohols in diverse structures (22 examples, including aromatic, substituted aromatic, unsaturated, heterocyclic, and linear chain alcohols) to their corresponding aldehydes. The results are comparable to reported transition-metal catalysts including conventional Pt/C and Ru/C catalysts for certain substrates under solvent-free conditions. The possible activation process of the oxidant and substrates by the surface oxygen groups and defect species are revealed with model catalysts, ex situ electrochemical measurements, and ex situ attenuated total reflectance. The zigzag edges of sp² carbon planes are shown to play a key role in these reactions.

Methanobactin-mediated synthesis of bimetallic Au-Pd/Al2O3 toward an efficient catalyst for glucose oxidation

A green bioreductive approach with methanobactin was adopted to fabricate bimetallic Au-Pd/Al2O3 catalysts for solvent-free oxidation of glucose to gluconic acid with H2O2 at atmospheric pressure. The catalyst was characterised by diffuse reflectance UV-vis spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction techniques to understand synergistic interactions between Au and Pd. Effects of Au to Pd molar ratio on the catalytic activity of Au-Pd/Al2O3 were investigated. The Au-Pd/Al2O3 catalyst with Au/Pd molar ratio of 0.8:0.2 exhibited excellent catalytic performance. With the catalyst, the oxidation activities of glucose to gluconic acid 2856 mmol min-1 g-1 and selectivity 99.6% were attained at 323 K with H2O2. The results indicated the activity and selectivity was affected by the ratio of Au/Pd on the Al2O3. The formation of Au0.8Pd0.2/Al2O3 was favourable for the catalytic reaction.

Understanding and controlling the structure and segregation behaviour of AuRh nanocatalysts

Heterogeneous catalysis, which is widely used in the chemical industry, makes a great use of supported late-transition-metal nanoparticles, and bimetallic catalysts often show superior catalytic performances as compared to their single metal counterparts. In order to optimize catalyst efficiency and discover new active combinations, an atomic-level understanding and control of the catalyst structure is desirable. In this work, the structure of catalytically active AuRh bimetallic nanoparticles prepared by colloidal methods and immobilized on rutile titania nanorods was investigated using aberration-corrected scanning transmission electron microscopy. Depending on the applied post-treatment, different types of segregation behaviours were evidenced, ranging from Rh core – Au shell to Janus via Rh ball – Au cup configuration. The stability of these structures was predicted by performing density-functional-theory calculations on unsupported and titania-supported Au-Rh clusters; it can be rationalized from the lower surface and cohesion energies of Au with respect to Rh, and the preferential binding of Rh with the titania support. The bulk-immiscible AuRh/TiO₂ system can serve as a model to understand similar supported nanoalloy systems and their synergistic behaviour in catalysis.

Synergy and Anti-Synergy between Palladium and Gold in Nanoparticles Dispersed on a Reducible Support

Highly active and stable bimetallic Au-Pd catalysts have been extensively studied for several liquid-phase oxidation reactions in recent years, but there are far fewer reports on the use of these catalysts for low-temperature gas-phase reactions. Here we initially established the presence of a synergistic effect in a range of bimetallic Au-Pd/CeZrO₄ catalysts, by measuring their activity for selective oxidation of benzyl alcohol. The catalysts were then evaluated for low-temperature WGS, CO oxidation, and formic acid decomposition, all of which are believed to be mechanistically related. A strong anti-synergy between Au and Pd was observed for these reactions, whereby the introduction of Pd to a monometallic Au catalyst resulted in a significant decrease in catalytic activity. Furthermore, monometallic Pd was more active than Pd-rich bimetallic catalysts. The nature of the anti-synergy was probed by several ex situ techniques, which all indicated a growth in metal nanoparticle size with Pd addition. However, the most definitive information was provided by in situ CO-DRIFTS, in which CO adsorption associated with interfacial sites was found to vary with the molar ratio of the metals and could be correlated with the catalytic activity of each reaction. As a similar correlation was observed between activity and the presence of Au⁰* (as detected by XPS), it is proposed that peripheral Au⁰* species form part of the active centers in the most active catalysts for the three gas-phase reactions. In contrast, the active sites for the selective oxidation of benzyl alcohol are generally thought to be electronically modified gold atoms at the surface of the nanoparticles.

Au-Pd alloy nanoparticles supported on layered double hydroxide for heterogeneously catalyzed aerobic oxidative dehydrogenation of cyclohexanols and cyclohexanones to phenols

Phenol, an important industrial chemical, is widely produced using the well-developed cumene process. However, demand for the development of a novel alternative method for synthesizing phenol from benzene has been increasing. Herein, we report a novel system for the synthesis of phenols through aerobic oxidative dehydrogenation of cyclohexanols and cyclohexanones, including ketone-alcohol (KA) oil, catalyzed by Mg-Al-layered double hydroxide (LDH)-supported Au-Pd alloy nanoparticles (Au-Pd/LDH). Alloying of Au and Pd and basicity of LDH are key factors in achieving the present transformation. Although monometallic Au/LDH, Pd/LDH, and their physical mixture showed almost no catalytic activity, Au-Pd/LDH exhibited markedly high catalytic activity for the dehydrogenative phenol production. Mechanistic studies showed that β-H elimination from Pd-enolate species is accelerated by Au species, likely via electronic ligand effects. Moreover, the effect of supports was critical; despite the high catalytic performance of Au-Pd/LDH, Au-Pd bimetallic nanoparticles supported on Al2O3, TiO2, MgO, and CeO2 were ineffective. Thus, the basicity of LDH plays a deterministic role in the present dehydrogenation possibly through its assistance in the deprotonation steps. The synthetic scope of the Au-Pd/LDH-catalyzed system was very broad; various substituted cyclohexanols and cyclohexanones were efficiently converted into the corresponding phenols, and N-substituted anilines were synthesized from cyclohexanones and amines. In addition, the observed catalysis was truly heterogeneous, and Au-Pd/LDH could be reused without substantial loss of its high performance. The present transformation is scalable, utilizes O2 in air as the terminal oxidant, and generates water as the only by-product, highlighting the potential practical utility and environmentally benign nature of the present transformation. Dehydrogenative aromatization of cyclohexanols proceeds through (1) oxidation of cyclohexanols to cyclohexanones; (2) dehydrogenation of cyclohexanones to cyclohexenones; and (3) disproportionation of cyclohexenones to afford the desired phenols. In the present Au-Pd/LDH-catalyzed transformation, the oxidation of the Pd-H species is included in the rate-determining step.

New challenges in gold catalysis: bimetallic systems

Since the discovery of the peculiar catalytic activity of gold catalysts, it became clear that gold could play a fundamental role also as a modifier.

Hybrid Ni–Al layered double hydroxide/graphene composite supported gold nanoparticles for aerobic selective oxidation of benzyl alcohol

A NiAl-LDH/RGO composite-supported Au catalyst was synthesized and exhibited high activity and stability in the selective oxidation of benzyl alcohol.

Au–Rh and Au–Pd nanocatalysts supported on rutile titania nanorods: structure and chemical stability

Au–Rh and Au–Pd nanoalloys synthesized by colloidal methods and immobilized on rutile titania nanorods are more stable than their monometallic counterparts for tetralin hydrogenation in the presence of sulfur.