Recent progress in the research of inorganic fullerene-like nanoparticles and inorganic nanotubes

Structural and electronic properties of double wall MoSTe nanotubes

Janus nanotubes originating from rolling up asymmetric dichalcogenide monolayers have shown unique properties compared to their 2D and 3D counterparts. Most of the work on Janus nanotubes is focused on single-wall (SW) tubes. In this work, we have investigated the structural and electronic properties of double wall (DW) MoSTe nanotubes using Density Functional Theory (DFT). The most stable DW, corresponding to a minimum of the strain energy, is formed by combining 16- and 24-unit cells for the inner and outer tubes. This DW configuration shows a slightly smaller inner diameter than the SW tube, which was formed by 18-unit cells due to the intra-wall interaction. The investigation of the band gaps of 2D structures under strain and SW/DW nanotubes revealed that the curvature of the nanotube and the strain induced when forming the tube are the two primary factors enabling the band gap tuning. Moreover, we found that the band gaps of the DW MoSTe tubes close, compared to the SWs, generating tubes with a metallic-like behavior. This property makes DW MoSTe nanotubes promising for electrochemical applications.

Investigation of the Crystallization Kinetics and Melting Behaviour of Polymer Blend Nanocomposites Based on Poly(L-Lactic Acid), Nylon 11 and TMDCs WS2

The aim of this work was to study the crystallization kinetics and melting behaviour of polymer blend nanocomposites based on poly (L-lactic acid) (PLLA), nylon 11 and tungsten disulfide nanotubes (INT-WS2), which are layered transition metal dichalcogenides (TMDCs), using non-isothermal differential scanning calorimetry (DSC). Blends containing different nylon 11 contents ranging from 20 to 80 wt.% with or without INT-WS2 were prepared by melt mixing. Evaluation of their morphology with high-resolution SEM imaging proved that the incorporation of inorganic nanotubes into the immiscible PLLA/nylon 11 mixtures led to an improvement in the dispersibility of the nylon 11 phase, a reduction in its average domain size and, consequently, an increase in its interfacial area. The crystallization temperatures of these PLLA/nylon 11-INT blends were influenced by the cooling rate and composition. In particular, the DSC results appear to demonstrate that the 1D-TMDCs WS2 within the PLLA/nylon 11-INT blend nanocomposites initiated nucleation in both polymeric components, with the effect being more pronounced for PLLA. Moreover, the nucleation activity and activation energy were calculated to support these findings. The nucleation effect of INT-WS2, which influences the melting behaviour of PLLA, is highly important, particularly when evaluating polymer crystallinity. This study opens up new perspectives for the development of advanced PLA-based nanomaterials that show great potential for ecological and biomedical applications.

Surface Functionalization of WS2 Nanosheets with Alkyl Chains for Enhancement of Dispersion Stability and Tribological Properties

Tungsten disulfide (WS₂) exhibits intriguing tribological properties and has been explored as an excellent lubricious material in thin-film and solid lubricants. However, the poor dispersibility of WS₂ has been a major challenge for its utilization in liquid lubricant applications. Herein, a top-down integrated approach is presented to synthesize oxygenated WS₂ (WS₂-O) nanosheets via strong acid-mediated oxidation and ultrasound-assisted exfoliation. The ultrathin sheets of WS₂-O, comprising 4-7 molecular lamellae, exhibit oxygen/hydroxyl functionalities. The organosilanes having variable surface-active leaving groups (chloro and ethoxy) are covalently grafted, targeting the hydroxyl/oxygen functionalities on the surface of WS₂-O nanosheets. The grafting of organosilanes is governed by the reactivity of chloro and ethoxy leaving groups. The DFT calculations further support the covalent interaction between the WS₂-O nanosheets and organosilanes. The alkyl chain-functionalized WS₂-O nanosheets displayed excellent dispersibility in mineral lube base oil. A minute dose of chemically functionalized-WS₂ (0.2 mg.mL^-1) notably enhanced the tribological properties of mineral lube oil by reducing the friction coefficient (52%) and wear volume (79%) for a steel tribopair. Raman analysis of worn surfaces revealed WS₂-derived lubricious thin film formation. The improved tribological properties are attributed to ultralow thickness, stable dispersion, and low shear strength of chemically functionalized WS₂ nanosheets, along with protective thin film formation over the contact interfaces of a steel tribopair. The present work opens a new avenue toward exploiting low-dimensional nanosheets for minimizing energy losses due to high friction.

Biopolymer Nanocomposite Materials Based on Poly(L-lactic Acid) and Inorganic Fullerene-like WS2 Nanoparticles

In the current study, inorganic fullerene (IF)-like tungsten disulphide (WS2) nanoparticles from layered transition metal dichalcogenides (TMDCs) were introduced into a poly(L-lactic acid) (PLLA) polymer matrix to generate novel bionanocomposite materials through an advantageous melt-processing route. The effectiveness of employing IF-WS2 on the morphology and property enhancement of the resulting hybrid nanocomposites was evaluated. The non-isothermal melt-crystallization and melting measurements revealed that the crystallization and melting temperature as well as the crystallinity of PLLA were controlled by the cooling rate and composition. The crystallization behaviour and kinetics were examined by using the Lui model. Moreover, the nucleating effect of IF-WS2 was investigated in terms of Gutzow and Dobreva approaches. It was discovered that the incorporation of increasing IF-WS2 contents led to a progressive acceleration of the crystallization rate of PLLA. The morphology and kinetic data demonstrate the high performance of these novel nanocomposites for industrial applications.

Bamboo-like π-Nanotubes with Tunable Helicity and Circularly Polarized Luminescence

We report the fabrication of an exotic bamboo-like π-nanotube via the hierarchical self-assembly of a dipeptide-substituted naphthalenediimide gelator with tunable helicity and circularly polarized luminescence (CPL). It was found that in the presence of trifluoroacetic acid (TFA) the gelator molecules self-assembled into a bamboo-like π-nanotube, which is composed of truncated nanocones and CPL active. When defining the diameter ratio of the lower to upper edge of each nanocone as a parameter to express the helicity of different nanotubes, it was found that both the helicity and CPL of these nanotubes can be adjusted by the amount of TFA. Moreover, the helicity of the nanotube can be conveyed to the achiral quantum dots (QDs) and produce a hybrid nanotube/QDs CPL active materials with adjustable dissymmetry factor. This work finds a new type self-assembled bamboo-like π-nanotube and unveils their helicity and CPL control.

Nanocomposite Materials Based on TMDCs WS2 Modified Poly(l-Lactic Acid)/Poly(Vinylidene Fluoride) Polymer Blends

Novel multifunctional biopolymer blend nanocomposites composed of poly(vinylidene fluoride)(PVDF) and tungsten disulfide nanotubes (INT-WS₂) that are layered transition metal dichalcogenides (TMDCs) were easily prepared by applying an economical, scalable, and versatile melt processing route. Furthermore, their synergistic effect to enhance the properties of poly(L-lactic acid) (PLLA) matrix was investigated. From morphological analysis, it was shown that the incorporation of 1D (INT)-WS₂ into the immiscible PLLA/PVDF mixtures (weight ratios: 80/20, 60/40, 40/60, and 20/80) led to an improvement in the dispersibility of the PVDF phase, a reduction in its average domain size, and consequently a larger interfacial area. In addition, the nanoparticles INT-WS₂ can act as effective nucleating agents and reinforcing fillers in PLLA/PVDF blends, and as such, greatly improve their thermal and dynamic-mechanical properties. The improvements are more pronounced in the ternary blend nanocomposites with the lowest PVDF content, likely due to a synergistic effect of both highly crystalline PVDF and 1D-TMDCs nano-additives on the matrix performance. Considering the promising properties of the developed materials, the inexpensive synthetic process, and the extraordinary properties of environmentally friendly and biocompatibe 1D-TMDCs WS₂, this work may open up opportunities to produce new PLLA/PVDF hybrid nanocomposites that show great potential for biomedical applications.

Transition metal dichalcogenide (TMDs) electrodes for supercapacitors: a comprehensive review

As globally, the main focus of the researchers is to develop novel electrode materials that exhibit high energy and power density for efficient performance energy storage devices. This review covers the up-to-date progress achieved in transition metal dichalcogenides (TMDs) (e.g. MoS₂, WS₂, MoSe_2,and WSe₂) as electrode material for supercapacitors (SCs). The TMDs have remarkable properties like large surface area, high electrical conductivity with variable oxidation states. These properties enable the TMDs as the most promising candidates to store electrical energy via hybrid charge storage mechanisms. Consequently, this review article provides a detailed study of TMDs structure, properties, and evolution. The characteristics technique and electrochemical performances of all the efficient TMDs are highlighted meticulously. In brief, the present review article shines a light on the structural and electrochemical properties of TMD electrodes. Furthermore, the latest fabricated TMDs based symmetric/asymmetric SCs have also been reported.

Optimized Metal Chalcogenides for Boosting Water Splitting

Electrocatalytic water splitting (2H2O → 2H2 + O2) is a very promising avenue to effectively and environmentally friendly produce highly pure hydrogen (H2) and oxygen (O2) at a large scale. Different materials have been developed to enhance the efficiency for water splitting. Among them, chalcogenides with unique atomic arrangement and high electronic transport show interesting catalytic properties in various electrochemical reactions, such as the hydrogen evolution reaction, oxygen evolution reaction, and overall water splitting, while the control of their morphology and structure is of vital importance to their catalytic performance. Herein, the general synthetic methods are summarized to prepare metal chalcogenides and different strategies are designed to improve their catalytic performance for water splitting. The remaining challenges in the research and development of metal chalcogenides and possible directions for future research are also summarized.

Hollow Micro/Nanostructured Ceria-Based Materials: Synthetic Strategies and Versatile Applications

Hollow micro/nanostructured CeO₂ -based materials (HMNCMs) have triggered intensive attention as a result of their unique structural traits, which arise from their hollowness and the fascinating physicochemical properties of CeO₂ . This attention has led to widespread applications with improved performance. Herein, a comprehensive overview of methodologies applied for the synthesis of various hollow structures, such as hollow spheres, nanotubes, nanoboxes, and multishelled hollow spheres, is provided. The synthetic strategies toward CeO₂ hollow structures are classified into three major categories: 1) well-established template-assisted (hard-, soft-, and in situ template) methods; 2) newly emerging self-template approaches, including selective etching, Ostwald ripening, the Kirkendall effect, galvanic replacement, etc.; 3) bottom-up self-organized formation synthesis (namely, oriented attachment and self-deformation). Their underlying mechanisms are concisely described and discussed in detail, the differences and similarities of which are compared transversely and longitudinally. Niche applications of HMNCMs in a wide range of fields including catalysis, energy conversion and storage, sensors, absorbents, photoluminescence, and biomedicines are reviewed. Finally, an outlook of future opportunities and challenges in the synthesis and application of CeO₂ -based hollow structures is also presented.

Copper submicrospheres induced by pulsed laser-irradiation with enhanced tribology properties

Copper submicrospheres prepared by one-step laser irradiation showed excellent friction reduction and self-repairing effects as lubricant additives.

Direct Chirality Recognition of Single-Crystalline and Single-Walled Transition Metal Oxide Nanotubes on Carbon Nanotube Templates

Chirality is a significant structural feature for chemistry, biology, physics, and materials science, and especially determines the electrical, mechanical, and optical properties of diverse tubular structures, such as carbon nanotubes (CNTs). To recognize the chirality of nanotubes, templates are introduced as potential tools to obtain crystalline samples with visible chiral fringes under electron microscopes. However, few efforts show optimistic results, and new understanding is desired to control the sample quality with CNT templates. Here, a synthesis strategy of single-crystalline molybdenum trioxide (α-MoO₃ ) nanotubes (MONTs) on CNT surfaces is reported to build a 1D van der Waals (vdW) heterostructure. The chirality of the MONTs can be directly "seen" and their structural selectivity is revealed. First, the centralized distribution of the chiral angles of the MONTs indicates a preferential orientation due to the anisotropic bending rigidity of the 2D layers. Then, the interlayer mismatching rejects the radial stacking of α-MoO₃ to maintain the single-walled nature. These results provide a spontaneous strategy for the efficient recognition and control of chirality, and open up a new avenue for CNT-based functional 1D vdW heterostructures.

Impact of functional inorganic nanotubes f-INTs-WS2 on hemolysis, platelet function and coagulation

Inorganic transition metal dichalcogenide nanostructures are interesting for several biomedical applications such as coating for medical devices (e.g. endodontic files, catheter stents) and reinforcement of scaffolds for tissue engineering. However, their impact on human blood is unknown. A unique nanomaterial surface-engineering chemical methodology was used to fabricate functional polyacidic polyCOOH inorganic nanotubes of tungsten disulfide towards covalent binding of any desired molecule/organic species via chemical activation/reactivity of this former polyCOOH shell. The impact of these nanotubes on hemolysis, platelet aggregation and blood coagulation has been assessed using spectrophotometric measurement, light transmission aggregometry and thrombin generation assays. The functionalized nanotubes do not induce hemolysis but decrease platelet aggregation and induce coagulation through intrinsic pathway activation. The functional nanotubes were found to be more thrombogenic than the non-functional ones, suggesting lower hemocompatibility and increased thrombotic risk with functionalized tungsten disulfide nanotubes. These functionalized nanotubes should be used with caution in blood-contacting devices.

Flatlands in the Holy Land: The Evolution of Layered Materials Research in Israel

The experimental identification of fullerenes in 1985, carbon nanotubes in 1991, inorganic nanotubes in 1992, and graphene in 2004 are cornerstone events that have marked the beginning of the layered nanostructures era of materials science. Nowadays, the synthesis of such low-dimensional systems is a routine practice allowing the controlled fabrication of 0-, 1-, and 2D layered structures of diverse chemical compositions. These systems possess unique physical properties that stem from their structural anisotropy characterized by strong intralayer covalent bonding and weaker interlayer dispersive interactions. This, in turn, results in promising functionality that attracts the attention of scientists from many disciplines including chemists, physicists, material scientists, engineers, as well as life scientists that are interested in both their basic and applied science aspects. Here, a short review of the contribution of the Israeli scientific community to this effort over the past 3 decades, is provided.

Temperature dependence of thermodynamic properties of MoS2 monolayer and single-wall nanotubes: Application of the developed three-body force field

MoS₂ nanostructures, especially mono-, multilayer nanothin films as well as single- and multiwall nanotubes are rather interesting popular objects in nanomaterials chemistry. The thermodynamic properties of inorganic nanotubes, and the temperature dependence of their properties can be efficiently investigated by first-principles and molecular mechanics methods in the framework of harmonic approximation. At the same time, only thin single-wall nanotubes are available for the first-principles calculations. The classical mechanics is suitable to simulate very large atomic systems and their phonon frequencies, but developing sufficiently accurate force field is rather tedious work. Herein, we report the force field fitted to the experimental and first-principles data on the structure of 2H- and 3RMoS₂ polytypes of bulk crystal, structure of monolayer and several bilayers, vibrational frequencies of 2HMoS₂ bulk and monolayer, relative energetic stability of polytypes experimental and first-principles data, elastic constants, strain energy of a (12, 12) MoS₂ nanotube. The thermodynamic functions and their temperature dependence for the armchair and zigzag nanotubes are calculated within the formalism of molecular mechanics using elaborated interatomic potential. The results of molecular mechanics and first-principles method application to the thinnest nanotubes are compared.

Group 6 transition metal dichalcogenide nanomaterials: synthesis, applications and future perspectives

Group 6 transition metal dichalcogenides (G6-TMDs), most notably MoS₂, MoSe₂, MoTe₂, WS₂ and WSe₂, constitute an important class of materials with a layered crystal structure. Various types of G6-TMD nanomaterials, such as nanosheets, nanotubes and quantum dot nano-objects and flower-like nanostructures, have been synthesized. High thermodynamic stability under ambient conditions, even in atomically thin form, made nanosheets of these inorganic semiconductors a valuable asset in the existing library of two-dimensional (2D) materials, along with the well-known semimetallic graphene and insulating hexagonal boron nitride. G6-TMDs generally possess an appropriate bandgap (1-2 eV) which is tunable by size and dimensionality and changes from indirect to direct in monolayer nanosheets, intriguing for (opto)electronic, sensing, and solar energy harvesting applications. Moreover, rich intercalation chemistry and abundance of catalytically active edge sites make them promising for fabrication of novel energy storage devices and advanced catalysts. In this review, we provide an overview on all aspects of the basic science, physicochemical properties and characterization techniques as well as all existing production methods and applications of G6-TMD nanomaterials in a comprehensive yet concise treatment. Particular emphasis is placed on establishing a linkage between the features of production methods and the specific needs of rapidly growing applications of G6-TMDs to develop a production-application selection guide. Based on this selection guide, a framework is suggested for future research on how to bridge existing knowledge gaps and improve current production methods towards technological application of G6-TMD nanomaterials.

Nanocomposites based on tubular and onion nanostructures of molybdenum and tungsten disulfides: inorganic design, functional properties and applications

The review concerns the development and the state-of-the-art in studies on the surface modification methods aimed at fabricating promising nanocomposites based on multilayer inorganic tubular and onion (fullerene-like) MoS2 and WS2 nanostructures. The synthetic details and structural features of these materials are considered. Considerable attention is paid to targeted functionalization of molybdenum and tungsten disulfide nanostructures and to fundamental principles that underlie their ability to chemical interactions. The functional properties and applications of the obtained materials are described.

The bibliography includes 183 references.

Metastable exohedrally decorated Borospherene B40

The experimental discovery of borospherene, the only non-carbon fullerene observed in nature, has generated a lot of interest in the scientific community and led to the theoretical prediction of various endohedrally and exohedrally decorated borospherene. We apply Minima Hopping Method (MHM), a global geometry optimization algorithm at the density functional level to check the stability of recently proposed exohedrally decorated borospherenes M₆@B₄₀ for (M = Li, Na, K, Rb, Be, Mg, Ca, Sr, Sc and Ti). By performing short MHM runs, we find that the proposed fullerene structures are not global minima. Our new lowest energy structures are significantly deformed and of much lower symmetry. These low energy structures spontaneously aggregate by forming chemical bonds when they are brought together. Therefore, it would be challenging to synthesize bulk materials made out of the theoretically postulated exohedrally decorated borospherenes such as B₄₀M₆ which might have technologically useful properties.

Chiral Nanotubes

Organic nanotubes, as assembled nanospaces, in which to carry out host-guest chemistry, reversible binding of smaller species for transport, sensing, storage or chemical transformation purposes, are currently attracting substantial interest, both as biological ion channel mimics, or for addressing tailored material properties. Nature's materials and machinery are universally asymmetric, and, for chemical entities, controlled asymmetry comes from chirality. Together with carbon nanotubes, conformationally stable molecular building blocks and macrocycles have been used for the realization of organic nanotubes, by means of their assembly in the third dimension. In both cases, chiral properties have started to be fully exploited to date. In this paper, we review recent exciting developments in the synthesis and assembly of chiral nanotubes, and of their functional properties. This review will include examples of either molecule-based or macrocycle-based systems, and will try and rationalize the supramolecular interactions at play for the three-dimensional (3D) assembly of the nanoscale architectures.

Boron nitride nanotubes and nanoplatelets as reinforcing agents of polymeric matrices for bone tissue engineering

This study investigates the mechanical properties and in vitro cytotoxicity of one- and two-dimensional boron nitride nanomaterials-reinforced biodegradable polymeric nanocomposites. Poly(propylene fumarate) (PPF) nanocomposites were fabricated using crosslinking agent N-vinyl pyrrolidone and inorganic nanomaterials: boron nitride nanotubes (BNNTs) and boron nitride nanoplatelets (BNNPs) dispersed at 0.2 wt % in the polymeric matrix. The incorporation of BNNPs and BNNTs resulted in a ∼38 and ∼15% increase in compressive (Young's) modulus, and ∼31 and ∼6% increase in compressive yield strength compared to PPF control, respectively. The nanocomposites showed a time-dependent increased protein adsorption for collagen I protein. The cytotoxicity evaluation of aqueous BNNT and BNNP dispersions (at 1-100 μg/mL concentrations) using murine MC3T3 preosteoblast cells showed ∼73-99% viability. The cytotoxicity evaluation of media extracts of nanocomposites before crosslinking, after crosslinking, and upon degradation (using 1×-100× dilutions) showed dose-dependent cytotoxicity responses. Crosslinked nanocomposites showed excellent (∼79-100%) cell viability, cellular attachment (∼57-67%), and spreading similar to cells grown on the surface of tissue culture polystyrene control. The media extracts of degradation products showed a dose-dependent cytotoxicity. The favorable cytocompatibility results in combination with improved mechanical properties of BNNT and BNNP nanocomposites opens new avenues for further in vitro and in vivo safety and efficacy studies towards bone tissue engineering applications. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 406-419, 2017.

Sorting Carbon Nanotubes

Sorting of single-wall carbon nanotubes by their electronic and atomic structures in liquid phases is reviewed in this chapter. We first introduce the sorting problem, and then provide an overview of several sorting methodologies, following roughly the chronological order of their development over the past 15 years or so. Major methods discussed include ion-exchange chromatography, density-gradient ultracentrifugation, selective extraction in organic solvents, gel chromatography, and aqueous two-phase extraction. A main focus of the review is on the common mechanisms underlining all sorting processes. We propose that differences in solvation among different nanotube species are the ultimate driving force of sorting, and we corroborate this proposal by presenting analysis on how the differences are realized in electronic-structure-based sorting and atomic-structure-based sorting. In the end, we offer some suggestions on future directions that may grow out of carbon nanotube sorting. In particular, the prospect of expanding the function of DNA/carbon nanotube hybrid to control inter-particle interactions both inside and outside the nanotube is discussed.

Recent advances in controlling the internal and external properties of self-assembling cyclic peptide nanotubes and dimers

Tuning the internal and external properties of self-assembling cyclic peptide nanotubes.

Hollow Structured Micro/Nano MoS₂ Spheres for High Electrocatalytic Activity Hydrogen Evolution Reaction

Molybdenum disulfide (MoS2) has attracted extensive attention as a non-noble metal electrocatalyst for hydrogen evolution reaction (HER). Controlling the skeleton structure at the nanoscale is paramount to increase the number of active sites at the surface. However, hydrothermal synthesis favors the presence of the basal plane, limiting the efficiency of catalytic reaction. In this work, perfect hollow MoS2 microspheres capped by hollow MoS2 nanospheres (hH-MoS2) were obtained for the first time, which creates an opportunity for improving the HER electrocatalytic performance. Benefiting from the controllable hollow skeleton structure and large exposed edge sites, high-efficiency HER activity was obtained for stacked MoS2 thin shells with a mild degree of disorder, proving the presence of rich active sites and the validity of the combined structure. In general, the obtained hollow micro/nano MoS2 nanomaterial exhibits optimized electrocatalytic activity for HER with onset overpotential as low as 112 mV, low Tafel slope of 74 mV decade(-1), high current density of 10 mA cm(-2) at η = 214 mV, and high TOF of 0.11 H2 s(-1) per active site at η = 200 mV.

Ultrafast Microwave Nano-manufacturing of Fullerene-Like Metal Chalcogenides

Metal Chalcogenides (MCs) have emerged as an extremely important class of nanomaterials with applications ranging from lubrication to energy storage devices. Here we report our discovery of a universal, ultrafast (60 seconds), energy-efficient, and facile technique of synthesizing MC nanoparticles and nanostructures, using microwave-assisted heating. A suitable combination of chemicals was selected for reactions on Polypyrrole nanofibers (PPy-NF) in presence of microwave irradiation. The PPy-NF serves as the conducting medium to absorb microwave energy to heat the chemicals that provide the metal and the chalcogenide constituents separately. The MCs are formed as nanoparticles that eventually undergo a size-dependent, multi-stage aggregation process to yield different kinds of MC nanostructures. Most importantly, this is a single-step metal chalcogenide formation process that is much faster and much more energy-efficient than all the other existing methods and can be universally employed to produce different kinds of MCs (e.g., MoS₂, and WS₂).

First principles modeling of Mo6S9 nanowires via condensation of Mo4S6 clusters and the effect of iodine doping on structural and electronic properties

By employing first principles DFT calculations, we propose a new stable model for Mo6S9 nanowires (NWs) obtained by condensing tetrahedral Mo4S6 clusters rather than octahedral Mo6S8 clusters, which are known as magic clusters in the Mo-S polyhedral cluster family. The pristine NW is found to be metallic and its local structure and physical properties can be tuned by doping of iodine atoms. This doping increases the number of Mo-Mo bonds in the NW, thus, Mo4 tetrahedra are initially fused to the Mo6 octahedron, and then, to the Mo8 dodecahedron. Further, a close correlation among the Mo-Mo bonding in the local structure, mechanical and electronic properties, is observed from our study. Finally, the stability of the pristine and iodine doped Mo8S12-xIx NW structures obtained from condensation of Mo4 tetrahedra are found to be quite comparable with that of already reported Mo6S9-xIx NWs with Mo6 octahedra as building blocks.

Supracolloidal fullerene-like cages: design principles and formation mechanisms

A vast collection of fascinating supracolloidal fullerene-like cages has been achievedviathe self-assembly of soft three-patch particles designed to mimic non-planar sp²hybridized carbon atoms in fullerenes, through the rational design of patch configuration, size, and interaction.

Polymer blend nanocomposites based on poly(l-lactic acid), polypropylene and WS2 inorganic nanotubes

The overall thermal and mechanical properties of PLLA/PP_PP-g-MAH/INT-WS₂ confirm the high-performance of these novel biopolymer blend nanocomposites, which opens new possibilities for use in biomedical applications.

Incorporation of inorganic fullerene-like WS2 into poly(ethylene succinate) to prepare novel biodegradable nanocomposites: a study on isothermal and dynamic crystallization

Novel biodegradable nanocomposites based on PES and environmentally-friendly IF-WS₂ were prepared with enhanced crystallization behavior in isothermal and non-isothermal modes.

Enhancing the mechanical and thermal properties of boron nitride nanoplatelets/elastomer nanocomposites by latex mixing

Hexagonal boron nitride nanoplatelets (BNNPs) can serve as two-dimensional (2D) fillers for elastomer nanocomposites due to their excellent and intriguing mechanical and thermal properties.

Growth Control of MoS2 Nanosheets on Carbon Cloth for Maximum Active Edges Exposed: An Excellent Hydrogen Evolution 3D Cathode

To greatly improve the hydrogen evolution reaction (HER) performance, it is the key approach to expose as many active edges of MoS2 as possible. This target is the research hotspot and difficulty of MoS2 which is a promising HER catalyst. In this work, we realized the active-edges control of MoS2 nanosheets on carbon cloth (CC) by growth control during the synthesis procedure. Moreover, MoS2 nanosheets vertically grown on carbon cloth (MoS2⊥CC) was confirmed to be the best morphology with maximum active edges exposed. Multifactors structure control resulted in abundant active-edges exposure and effective electron delivery, thus excellent HER activity. This three-dimensional cathode, MoS2⊥CC, can reach a great current density of 200 mA/cm(2) at a small overpotential of 205 mV. The preeminent HER performance can rival the best MoS2-based catalyst ever reported.

WS2 inorganic nanotubes reinforced poly(l-lactic acid)/hydroxyapatite hybrid composite biomaterials

This study confirms the potential use of WS₂ inorganic nanotubes to prepare a novel PLLA/HA hybrid nanocomposite for biomedical applications.

Bio-based polymer nanocomposites based on nylon 11 and WS2 inorganic nanotubes

This study confirms the potential use of novel bio-nylon 11/INT-WS₂ for many eco-friendly and biomedical applications.

Synthesized ultrathin MoS2 nanosheets perpendicular to graphene for catalysis of hydrogen evolution reaction

The S atoms bind to active sites of RGO for the nucleation of MoS₂ and its subsequent growth perpendicular to RGO.

Enhanced field emission of WS₂ nanotubes

Results on electron field emission from free standing tungsten disulfide (WS2) nanotubes (NTs) are presented. Experiments show that the NTs protruding on top of microstructures are efficient cold emitters with turn-on fields as low as 1 V/μm and field enhancement of few thousands. Furthermore, the emission current shows remarkable stability over more than eighteen hours of continuous operation. Such performance and long-term stability of the WS2 cathodes is comparable to that reported for optimized carbon nanotube (CNTs) based emitters. Besides this, it is found that the WS2 cathodes prepared are less sensitive than CNTs in chemical reactive ambients. The high field enhancement and superior reliability achieved indicates a potential for vacuum nanoelectronics and flat panel display applications.

Mechanisms in the solution growth of free-standing two-dimensional inorganic nanomaterials

Free-standing two-dimensional (2D) nanomaterials have attracted extensive and growing research interest owing to their exotic physical and mechanical properties, which have enabled their applications in electronics, optoelectronics, electrochemical and biomedical devices. Current synthesis strategies rely largely on top-down approaches such as etching and exfoliation. Among bottom-up approaches in literature, there lacks a systematic understanding of the mechanisms of 2D crystal growth, unlike one-dimensional nanomaterials whose growth mechanisms have been well documented. To date, the growth design of free-standing 2D nanomaterials has remained a case-by-case practice. This review focuses on the bottom-up solution synthesis of free-standing 2D nanomaterials and summarizes the general mechanisms and empirical methodologies that can lead to 2D crystal growth. A brief outlook on the development of synthesis and application of solution-grown 2D nanomaterials is also presented.

Vertical heterostructures of layered metal chalcogenides by van der Waals epitaxy

We report a facile chemical vapor deposition (CVD) growth of vertical heterostructures of layered metal dichalcogenides (MX2) enabled by van der Waals epitaxy. Few layers of MoS2, WS2, and WSe2 were grown uniformly onto microplates of SnS2 under mild CVD reaction conditions (<500 °C) and the heteroepitaxy between them was confirmed using cross-sectional transmission electron microscopy (TEM) and unequivocally characterized by resolving the large-area Moiré patterns that appeared on the basal planes of microplates in conventional TEM (nonsectioned). Additional photoluminescence peaks were observed in heterostructures of MoS2-SnS2, which can be understood with electronic structure calculations to likely result from electronic coupling and charge separation between MoS2 and SnS2 layers. This work opens up the exploration of large-area heterostructures of diverse MX2 nanomaterials as the material platform for electronic structure engineering of atomically thin two-dimensional (2D) semiconducting heterostructures and device applications.

Enhancing the mechanical properties of BN nanosheet-polymer composites by uniaxial drawing

We have used liquid exfoliation of hexagonal Boron-Nitride (BN) to prepare composites of BN nanosheets of three different sizes in polyvinylchloride matrices. These composites show low levels of reinforcement, consistent with poor alignment of the nanosheets as-described by a modified version of Halpin-Tsai theory. However, drawing of the composites to 300% strain results in a considerable increase in mechanical properties with the maximum composite modulus and strength both ∼×3 higher than that of the pristine polymer. In addition, the rate of increase of modulus with BN volume fraction was up to 3-fold larger than for the unstrained composites. This is higher than can be explained by drawing-induced alignment using Halpin-Tsai theory. However, the data was consistent with a combination of alignment and strain-induced de-aggregation of BN multilayers.

Structure analysis on the nanoscale: closed WS2 nanoboxes through a cascade of topo- and epitactic processes

Closed WS₂ nanoboxes were formed by topotactic sulfidization of a WO₃/WO₃·⅓H₂O intergrowth phase. The box-like morphology can be traced back to a topotactic dehydration reaction of the precursor followed by an epitactic induction of intermediate hexagonal WO₃.