A Bio-Inspired Free-Standing Film with Versatility: From Heterogeneous CTCs Programed Isolating to Breast Cancer Molecular Typing

Developing a robust strategy for profiling heterogeneous circular tumor cells specifically, distinguishing the phenotypes of which in blood sample of cancer patient precisely, and releasing them sequentially, is significant for cancer management by liquid biopsy. Herein, a bio-inspired free-standing and flexible film composed of TiO2 nanotube and silk fibroin, fabricated with multiply dynamic bioactive surface (TSF/MDBS) by a simple and eco-friendly way including using polydopamine chemistry and dual dynamic covalent chemistry, is reported. The as-prepared TSF/MDBS binds specific peptides toward cells with epithelial biomarker and human epithelial growth factor receptor 2 (HER2) biomarker, and antifouling agents bovine serum albumin for obviating platelets and proteins adhering of blood, can capture heterogeneous CTCs with enhanced capability due to the cytocompatible soft film and exquisite surface design, and further release the captured cells as program, by specifically breaking down the covalent bonds in sequence via the action of adding biocompatible molecules fructose and glutathione. By applying the TSF/MDBS, it can be tailored into desired pieces for identifying CTCs with different phenotypes (HER2-high and HER2-low) from the unprocessed blood samples of breast cancer patients, and finally profiling these heterogeneous CTCs, to discriminate HER2 positive or negative of breast cancer patients in clinical applications.

Cancer Cell Membrane-Based Materials for Biomedical Applications

The nanodelivery system provides a novel direction for disease diagnosis and treatment; however, its delivery effectiveness is restricted by the short biological half-life and inadequate tumor targeting. The immune evasion properties and homologous targeting capabilities of natural cell membranes, particularly those of cancer cell membranes (CCM), have gained significant interest. The integration of CCM and nanoparticles has resulted in the emergence of CCM-based nanoplatforms (CCM-NPs), which have gained significant attention due to their unique properties. CCM-NPs not only prolong the blood circulation time of core nanoparticles, but also direct them for homologous tumor targeting. Herein, the history and development of CCM-NPs as well as how these platforms have been used for biomedical applications are discussed. The application of CCM-NPs for cancer therapy will be described in detail. Translational efforts are currently under way and further research to address key areas of need will ultimately be required to facilitate the successful clinical adoption of CCM-NPs.

Hematoma-like dynamic hydrogelation through natural glycopeptide molecular recognition for infected bone fracture repair

Infected bone fractures remain a major clinical challenge for orthopedic surgeons. From a tissue regeneration perspective, biomaterial scaffolds with antibacterial and osteoinductive activities are highly desired, while advanced materials capable of mimicking the pathological microenvironment during the healing process of infected tissues remain an area deserving more research. Hematoma, the gel-like blood coagulum, plays an essential role in bone fracture repair because of its ability to serve as a dynamic and temporary scaffold with cytokines for both pathogen elimination and tissue healing. In light of this, we designed a dynamic hydrogel with hematoma-like antimicrobial or reparative performance for infected bone fracture repair in this study. The proposed dynamic hydrogel network was based on the reversible recognition of a natural glycopeptide antibiotic vancomycin (Van) and its target dipeptide D-Ala-D-Ala (AA), which could serve as a hematoma-like scaffold for obliterating bacteria in the fracture region and promoting bone repair by introducing an endogenous osteogenic peptide (OGP). In vivo experiments demonstrated that the hydrogel could rapidly eradicate bacteria, improve bone regeneration and restore the local inflammatory microenvironment. Together, findings from this study imply that the use of hematoma-like dynamic hydrogel could lead to a biomimetic revolution in surgical strategies against susceptible bone fractures.

Phototriggered structures: Latest advances in biomedical applications

Non-invasive control of the drug molecules accessibility is a key issue in improving diagnostic and therapeutic procedures. Some studies have explored the spatiotemporal control by light as a peripheral stimulus. Phototriggered drug delivery systems (PTDDSs) have received interest in the past decade among biological researchers due to their capability the control drug release. To this end, a wide range of phototrigger molecular structures participated in the DDSs to serve additional efficiency and a high-conversion release of active fragments under light irradiation. Up to now, several categories of PTDDSs have been extended to upgrade the performance of controlled delivery of therapeutic agents based on well-known phototrigger molecular structures like o-nitrobenzyl, coumarinyl, anthracenyl, quinolinyl, o-hydroxycinnamate and hydroxyphenacyl, where either of one endows an exclusive feature and distinct mechanistic approach. This review conveys the design, photochemical properties and essential mechanism of the most important phototriggered structures for the release of single and dual (similar or different) active molecules that have the ability to quickly reason of the large variety of dynamic biological phenomena for biomedical applications like photo-regulated drug release, synergistic outcomes, real-time monitoring, and biocompatibility potential.

Dynamic photoelectrical regulation of ECM protein and cellular behaviors

Dynamic regulation of cell-extracellular matrix (ECM)-material interactions is crucial for various biomedical applications. In this study, a light-activated molecular switch for the modulation of cell attachment/detachment behaviors was established on monolayer graphene (Gr)/n-type Silicon substrates (Gr/Si). Initiated by light illumination at the Gr/Si interface, pre-adsorbed proteins (bovine serum albumin, ECM proteins collagen-1, and fibronectin) underwent protonation to achieve negative charge transfer to Gr films (n-doping) through π-π interactions. This n-doping process stimulated the conformational switches of ECM proteins. The structural alterations in these ECM interactors significantly reduced the specificity of the cell surface receptor-ligand interaction (e.g., integrin recognition), leading to dynamic regulation of cell adhesion and eventual cell detachment. RNA-sequencing results revealed that the detached bone marrow mesenchymal stromal cell sheets from the Gr/Si system manifested regulated immunoregulatory properties and enhanced osteogenic differentiation, implying their potential application in bone tissue regeneration. This work not only provides a fast and feasible method for controllable cells/cell sheets harvesting but also gives new insights into the understanding of cell-ECM-material communications.

•

A light-activated molecular switch for regulation of cell attachment/detachment behaviors was established on (Gr/Si) substrates.

•

Light-induced charge transfer from ECM protein to Gr/Si through π-π interactions, resulting in the conformational alteration of ECM proteins.

•

Structural changes in ECM weakened the binding between RGD and integrin, inducing cell detachment.

•

This work provides a feasible method for cell harvesting and improves the understanding of cell-ECM-material communications.

Functional Blood-Brain Barrier Model with Tight Connected Minitissue by Liquid Substrates Culture

The functional blood-brain barrier (BBB) model can provide a reliable tool for better understanding BBB transport mechanisms and in vitro preclinical experimentation. However, recapitulating microenvironmental complexities and physiological functions in an accessible approach remains a major challenge. Here, a new BBB model with a high-cell spatial density and tightly connected biomimetic minitissue is presented. The minitissue, pivotal functional structure of the BBB model, is fabricated by a novel and easy-to-use liquid substrate culture (LSC) method, which allows cells to self-assemble and self-heal into macrosized, tightly connected membranous minitissue. The minitissue with uniform thickness can be easily harvested in their entirety with extracellular matrix. Attributed to the tightly connected minitissue formed by LSC, the fabricated BBB biomimetic model has 1 to 2 orders of magnitude higher transendothelial electric resistance than the commonly reported BBB model. It also better prevents the transmission of large molecular substances, recapitulating the functional features of BBB. Furthermore, the BBB biomimetic model provides feedback regarding BBB-destructive drugs, exhibits selective transmission, and shows efflux pump activity. Overall, this model can serve as an accessible tool for life science or clinical medical researchers to enhance the understanding of human BBB and expedite the development of new brain-permeable drugs.

Reversible Self-Assembled Monolayers with Tunable Surface Dynamics for Controlling Cell Adhesion Behavior

Cells adhering onto surfaces sense and respond to chemical and physical surface features. The control over cell adhesion behavior influences cell migration, proliferation, and differentiation, which are important considerations in biomaterial design for cell culture, tissue engineering, and regenerative medicine. Here, we report on a supramolecular-based approach to prepare reversible self-assembled monolayers (rSAMs) with tunable lateral mobility and dynamic control over surface composition to regulate cell adhesion behavior. These layers were prepared by incubating oxoacid-terminated thiol SAMs on gold in a pH 8 HEPES buffer solution containing different mole fractions of ω-(ethylene glycol)_2-4- and ω-(GRGDS)-, α-benzamidino bolaamphiphiles. Cell shape and morphology were influenced by the strength of the interactions between the amidine-functionalized amphiphiles and the oxoacid of the underlying SAMs. Dynamic control over surface composition, achieved by the addition of inert filler amphiphiles to the RGD-functionalized rSAMs, reversed the cell adhesion process. In summary, rSAMs featuring mobile bioactive ligands offer unique capabilities to influence and control cell adhesion behavior, suggesting a broad use in biomaterial design, tissue engineering, and regenerative medicine.

DNA-POINT: DNA Patterning of Optical Imprint for Nanomaterials Topography

Engineering well-defined scale-spanning structures through transfer of diverse biomolecules and materials to a surface is of tremendous interest in life sciences research yet remains profoundly challenging. Here, we report a novel method, termed as DNA patterning of optical imprint for nanomaterials topography (DNA-POINT), for rapid photopatterning of large area, geometrically complex surfaces via light-responsive DNA. Our method employs top-down multiphoton-driven patterning of azobenzene-modified DNA strands, offering precise position control of molecules and nanoparticles along the axial plane and a template for bottom-up self-assembly of multiple layers of different chemical composition along the vertical plane. We demonstrate the surface patterning of plasmonic gold nanoparticles, fluorophore-labeled oligonucleotides, and multiple layers consisting of molecule-nanoparticle hybrid patterns into preconceived shapes without compromising on the functionality of the biomolecules. Furthermore, we exhibit scanning mode operation of DNA-POINT, thereby paving the way for maskless and cleanroom-free fast fabrication of biochips for high-throughput diagnostics and biosensing applications.

DNA modified MSN-films as versatile biointerfaces to study stem cell adhesion processes

A significant bottleneck in the clinical translation of stem cells remains eliciting the desired stem cell behavior once transplanted in the body. In their natural environment, stem cell fate is regulated by their interaction with extracellular matrix (ECM), mainly through integrin-mediated cell adhesion. 2D biointerfaces that selectively present ECM-derived ligands can be used as valuable tools to study and improve our understanding on how stem cells interact with their environment. Here we developed a new type of biointerface based on mesoporous silica nanoparticles (MSN) which are interesting nanomaterials for biointerface engineering because they allow close control over surface physiochemical properties. To create the platform, DNA functionalized MSN (MSN-ssDNA) with varying PEG linker length were developed. Cell adhesion tripeptide RGD was conjugated to a complementary DNA strand, which could specifically bind to MSN-ssDNA to create MSN-dsDNA-RGD films. We showed that MSN-dsDNA-RGD films could promote hMSCs adhesion and spreading, whereas MSN-dsDNA films without RGD resulted in poor cell spreading with round morphology, and low cell adhesion. In addition, we showed that cell adhesion to the films is PEG length-dependent. The design of the platform allows easy incorporation of other and multiple ECM ligands, as well as soluble cues, making MSN-ssDNA based biointerfaces a novel tool to study ligand-stem cell interactions.

Reversible dougong structured receptor-ligand recognition for building dynamic extracellular matrix mimics

This paper reports an exciting breakthrough in dynamic biomaterials design mimicking the reversible interlocking and remoldable structure of extracellular matrix (ECM). Specifically, we realize a nature-derived molecular recognition event (i.e., the antibiotic glycopeptide vancomycin [Van] and the dipeptide d-Ala-d-Ala [AA] receptor–ligand interaction) as a reversible strategy for fabrication of dynamic biointerface and 3D ECM mimics. We believe that the specific but reversible Van–AA molecular recognition would be a strategy for dynamic biomaterial fabrication, and that the easy-handling merit, ECM-like remoldability, and inherent antibacterial activity will bring insights to biomaterial scaffold design in tissue engineering and regenerative medicine.

Dynamic biomaterials excel at recapitulating the reversible interlocking and remoldable structure of the extracellular matrix (ECM), particularly in manipulating cell behaviors and adapting to tissue morphogenesis. While strategies based on dynamic chemistries have been extensively studied for ECM-mimicking dynamic biomaterials, biocompatible molecular means with biogenicity are still rare. Here, we report a nature-derived strategy for fabrication of dynamic biointerface as well as a three-dimensional (3D) hydrogel structure based on reversible receptor–ligand interaction between the glycopeptide antibiotic vancomycin and dipeptide d-Ala-d-Ala. We demonstrate the reversible regulation of multiple cell types with the dynamic biointerface and successfully implement the dynamic hydrogel as a functional antibacterial 3D scaffold to treat tissue repair. In view of the biogenicity and high applicability, this nature-derived reversible molecular strategy will bring opportunities for malleable biomaterial design with great potential in biomedicine.

Unexpected hydrophobicity on self-assembled monolayers terminated with two hydrophilic hydroxyl groups

Current major approaches to access surface hydrophobicity include directly introducing hydrophobic nonpolar groups/molecules onto the surface or elaborately fabricating surface roughness. Here, for the first time, molecular dynamics simulations show an unexpected hydrophobicity with a contact angle of 82° on a flexible self-assembled monolayer terminated only with two hydrophilic OH groups ((OH)₂-SAM). This hydrophobicity, verified by a water slip phenomenon characterizing the friction on the (OH)₂-SAM surface, is attributed to the formation of a hexagonal-ice-like H-bonding structure in the OH matrix of (OH)₂-SAM, which sharply reduces the hydrogen bonds between the surface and the water molecules above. The unique simple interface presented here offers a significant molecular-level platform for examining the bio-interfacial interactions ranging from biomolecule binding to cell adhesion.

Photoswitchable Machine-Engineered Plasmonic Nanosystem with High Optical Response for Ultrasensitive Detection of microRNAs and Proteins Adaptively

Modulating optoelectronic properties of inorganic nanostructures tethered with light-responsive molecular switches by their conformational change in the solid state is fundamentally important for advanced nanoscale-device fabrication, specifically in biosensing applications. Herein, we present an entirely new solid-state design approach employing the light-induced reversible conformational change of spiropyran (SP)-merocyanine (MC) covalently attached to gold triangular nanoprisms (Au TNPs) via alkylthiolate self-assembled monolayers to produce a large localized surface plasmon resonance response (∼24 nm). This shift is consistent with the increase in thickness of the local dielectric shell-surrounded TNPs and perhaps short-range dipole-dipole (permanent and induced) interactions between TNPs and the zwitterionic MC form. Water contact angle measurement and Raman spectroscopy characterization unequivocally prove the formation of a stable TNP-MC structural motif. Utilizing this form, we fabricated the first adaptable nanoplasmonic biosensor, which uses an identical structural motif for ultrasensitive, highly specific, and programmable detection of microRNAs and proteins at attomolar concentrations in standard human plasma and urine samples, and at femtomolar concentrations from bladder cancer patient plasma (n = 10) and urine (n = 10), respectively. Most importantly, the TNP-MC structural motif displays a strong binding affinity with receptor molecules (i.e., single-stranded DNA and antibody) producing a highly stable biosensor. Taken together, the TNP-MC structural motif represents a multifunctional super biosensor with the potential to expand clinical diagnostics through simplifying biosensor design and providing highly accurate disease diagnosis.

A versatile pH-responsive peptide based dynamic biointerface for tracking bacteria killing and infection resistance

Herein we reported a versatile dynamic biointerface based on pH-responsive peptide self-assembly and disassembly to capture the bacteria to avoid bacteria further infected tissue around that can release peptides from the surface in a slightly acidic environment to kill the bacteria with the specificity. The exposed biointerface still presented infection resistance.

Enzyme-Initiated Assembly of an Extracellular-Like Two-Dimensional Nanonetwork as a Method to Detect Procancerous Activity

Extracellular matrix (ECM) enzymes such as lysyl oxidase (LOX) provide a new possibility to contain the invasive progress of cancer. Unlike conventional enzymes, the activity of ECM enzymes is not simply the conversion of the substrate to the product; the amount of enzymes such as matrix metalloproteinases in the ECM changes the structural integrity and morphology of the ECM. These are all important aspects that must be monitored in a spatiotemporally coupled fashion to fully understand their procancerous effect. To achieve this goal, a new molecular probe is developed, which, unlike antibodies or aptamers, can interact with the target enzyme in a more interactive way: the probe can withdraw the metal ion cofactor of the enzyme and modulate its catalytic ability. This can lead to self-propagated cross-linking of the probes to form a network not dissimilar to the collagen and elastin network of the ECM, formed through LOX activity. Thus, the biosensing process itself is a biomimetic of what may occur in vivo in the ECM, and three distinct types of signal readouts can be simultaneously recorded on the sensing surface to provide a fuller picture of ECM enzyme activity, not achievable with traditional designs. Using this method, a parallel between the detected signal and the progress of colorectal cancer can be observed. These results may point to prospective application of this method in evaluating ECM-related tumor invasiveness in the future.

Multifunctional-imprinted nanocomposite membranes with thermo-responsive biocompatibility for selective/controllable recognition and separation application

Inspired by the biomimetic modification strategy of dopamine self-polymerization technique, molecularly imprinted nanocomposite membranes (MINCMs) with thermo-responsive rebinding and separation performance were synthesized and evaluated. Herein, the Au/SiO₂-based multilevel structure had been successfully obtained onto the polydopamine (pDA) modified membrane surfaces. Afterward, the poly(N-isopropylacrylamide)-based biomolecule-imprinted sites were adequately constructed by developing a photoinitiated atom transfer radical polymerization (pATRP) imprinting strategy using the high-biocompatible ovalbumin (Ova, pI 4.6) as template molecule. Therefore, thermo-responsive 'specific recognition sites' toward Ova were then achieved on the as-prepared MINCMs after the well-designed imprinting process. When the external temperature was set at 37 °C, excellent ovalbumin rebinding capacity (33.26 mg/g), selectivity factor (3.06) and structural stability were obtained. Importantly, as to the controllable biocompatibility research of this work, the bare glass and Ova-bound-MINCMs (the MINCMs were bound with Ova) showed basically the same cell adhesion behaviors and viability, indicating the excellent biocompatibility of the Ova-bound-MINCMs. Additionally, efficient and rapid regulation of cell adhesion/detachment on ovalbumin-bound MINCMs could be still obtained even after 10 cycles of temperature-switch process, which indicated that the as-prepared MINCMs had strong ability to work under high intensity and long continuous operation.

Thermo-responsive imprinted hydrogel with switchable sialic acid recognition for selective cancer cell isolation from blood

In this work, a sialic acid (SA)-imprinted thermo-responsive hydrogel layer was prepared for selective capture and release of cancer cells. The SA-imprinting process was performed at 37 °C using thermo-responsive functional monomer, thus generating switchable SA-recognition sites with potent SA binding at 37 °C and weak binding at a lower temperature (e.g., 25 °C). Since SA is often overexpressed at the glycan terminals of cell membrane proteins or lipids, the SA-imprinted hydrogel layer could be used for selective cancer cell recognition. Our results confirmed that the hydrogel layer could efficiently capture cancer cells from not only the culture medium but also the real blood samples. In addition, the captured cells could be non-invasively released by lowing the temperature. Considering the non-invasive processing mode, considerable capture efficiency, good cell selectivity, as well as the more stable and durable SA-imprinted sites compared to natural antibodies or receptors, this thermo-responsive hydrogel layer could be used as a promising and general platform for cell-based cancer diagnosis.

•

Thermo-responsive sialic acid (SA)-imprinted hydrogel layer was prepared.

•

The hydrogel layer could efficiently and selective capture cancer cells at 37 °C.

•

The captured cancer cells could be released at a lower temperature (e.g., 25 °C).

•

The hydrogel layer could be used for capture and release cancer cells from blood.

Bioinspired surfaces with wettability: biomolecule adhesion behaviors

Surface wettability plays an important role in regulating biomolecule adhesion behaviors. The biomolecule adhesion behaviors of superwettable surfaces have become an important topic as an important part of the interactions between materials and organisms. In addition to general research on the moderate wettability of surfaces, the studies of biomolecule adhesion behaviors extend to extreme wettability ranges such as superhydrophobic, superhydrophilic and slippery surfaces and attract both fundamental and practical interest. In this review, we summarize the recent studies on biomolecule adhesion behaviors on superwettable surfaces, especially superhydrophobic, superhydrophilic and slippery surfaces. The first part will focus on the influence of extreme wettability on cell adhesion behaviors. The second part will concentrate on the adhesion behaviors of biomacromolecules on superwettable surfaces including proteins and nucleic acids. Finally, the influences of wettability on small molecule adhesion behaviors on material surfaces have also been investigated. The mechanism of superwettable surfaces and their influences on biomolecule adhesion behaviors have been studied and highlighted.

In Situ Cell Membrane Fusion for Engineered Tumor Cells by Worm-like Nanocell Mimics

Cell-based therapy is a promising clinic strategy to address many unmet medical needs. However, engineering cells faces some inevitable challenges, such as limited sources of cells, cell epigenetic alterations, and short shelf life during in vitro culture. Here, the worm-like nanocell mimics are fabricated to engineer effectively the tumor cells in vivo through the synergistic combination of nongenetic membrane surface engineering and inside encapsulation using in situ cell membrane fusion. The specific targeting and deformability of nanocell mimics play a vital role in membrane fusion mechanisms. The engineered primary tumor cells improved the tumor penetration of therapeutic cargoes via extracellular vesicles, while the engineered circulating tumor cells (CTCs) can capture the homologous cells to form the CTC clusters in the bloodstream and eliminate the CTC clusters in the lung, thus achieving excellent antitumor and antimetastasis efficacy. Above all, we find an intriguing phenomenon, in situ cell membrane fusion by the worm-like nanocell mimics, and our finding of in situ cell membrane fusion inspired us to engineer tumor cells in vivo. The present study would be a particularly meaningful strategy to directly engineer cells in vivo for cell-based therapy.

Emerging functional materials based on chemically designed molecular recognition

The specific interactions responsible for molecular recognition play a crucial role in the fundamental functions of biological systems. Mimicking these interactions remains one of the overriding challenges for advances in both fundamental research in biochemistry and applications in material science. However, current molecular recognition systems based on host–guest supramolecular chemistry rely on familiar platforms (e.g., cyclodextrins, crown ethers, cucurbiturils, calixarenes, etc.) for orienting functionality. These platforms limit the opportunity for diversification of function, especially considering the vast demands in modern material science. Rational design of novel receptor-like systems for both biological and chemical recognition is important for the development of diverse functional materials. In this review, we focus on recent progress in chemically designed molecular recognition and their applications in material science. After a brief introduction to representative strategies, we describe selected advances in these emerging fields. The developed functional materials with dynamic properties including molecular assembly, enzyme-like and bio-recognition abilities are highlighted. We have also selected materials with dynamic properties in contract to traditional supramolecular host–guest systems. Finally, the current limitations and some future trends of these systems are discussed.

Unidirectional rotating molecular motors dynamically interact with adsorbed proteins to direct the fate of mesenchymal stem cells

Artificial rotary molecular motors convert energy into controlled motion and drive a system out of equilibrium with molecular precision. The molecular motion is harnessed to mediate the adsorbed protein layer and then ultimately to direct the fate of human bone marrow-derived mesenchymal stem cells (hBM-MSCs). When influenced by the rotary motion of light-driven molecular motors grafted on surfaces, the adsorbed protein layer primes hBM-MSCs to differentiate into osteoblasts, while without rotation, multipotency is better maintained. We have shown that the signaling effects of the molecular motion are mediated by the adsorbed cell-instructing protein layer, influencing the focal adhesion-cytoskeleton actin transduction pathway and regulating the protein and gene expression of hBM-MSCs. This unique molecular-based platform paves the way for implementation of dynamic interfaces for stem cell control and provides an opportunity for novel dynamic biomaterial engineering for clinical applications.

Pipette-like action of a reusable and NIR light-responsive film for the aspiration and removal of viable cancer cells

A reusable and NIR light-responsive composite membrane is developed to capture/release viable cancer cells.

Synthetic mycomelanin thin films as emergent bio-inspired interfaces controlling the fate of embryonic stem cells

Mycomelanin thin films from 1,8-dihydroxynaphthalene can serve as a biointerface inducing adhesion and proliferation of ESCs and promoting their differentiation towards endodermal lineages.

Bistable adhesion behavior of an anisotropic particle on a sliding polymer brush

Bistable adhesion behavior of an anisotropic particle adsorbed on a sliding polymer brush was found by a single chain in mean field theory (SCMFT) study. Adjacent to the normal adhesion state at which the entropy is depressed, an additional abnormal adhesion state appears. The numerical results demonstrate that the physical mechanism of the bistable adhesion behavior is from the cooperation of the reptation motion of the sliding polymers and the rotating motion of the anisotropic particle. In the abnormal adhesion state, the orientational entropy of the anisotropic particle dominates the adhesion behavior, although the translational entropy is depressed. This bistable adhesion behavior works like a lasso rope in that the abnormal state provides a wide, sensitive, and responsive range, and the normal state furnishes stable adhesion depending on the particle anisotropy.

A Magnetic Dynamic Microbiointerface with Biofeedback Mechanism for Cancer Cell Capture and Release

Dynamic biointerfaces with reversible surface bioactivities enable dynamic modulation of cell-material interactions, thus attracting great attention in biomedical science. Herein, we demonstrated a paradigm shift of dynamic biointerfaces from macroscopical substrates to micron-sized particles by reversible engineering of a phenylboronic acid (PBA)-functionalized magnetic microbead with mussel-inspired cancer cell-targeting peptide. Due to reversible catechol-boronate interactions between the peptides and microbeads, the micron-sized dynamic biointerface exhibited sugar-responsive cancer-targeting activity, showing the potential as a microplatform for magnetic and noninvasive isolation of cancer cells through natural biofeedback mechanism (e.g., human glycemic volatility). Our results demonstrated that the dynamic magnetic platform was capable of selective cancer cell capture (∼85%) and sugar-triggered release of them (>93%) in cell culture medium with high efficiency. More importantly, by using this platform, a decent number of target cells (∼23 on average) could be magnetically isolated and identified from artificial CTC blood samples (1 mL) spiked with 100 cancer cells. In view of the biomimetic nature, high capture efficiency, excellent selectivity, and superiority in cell separation and purification processes, the dynamic magnetic microplatform reported here would be a promising and general tool for rare cell detection and separation and cell-based disease diagnosis.

Theoretical Study of the Optimal Design of a UV-Controllable Smart Surface Decorated by a Hybrid Azobenzene-Containing Polymer Layer

Although grafting polymers onto surfaces is widely suggested for designing smart systems, optimizing the performance of such systems is not simple. In this article, we investigate an azo-polymer-based smart surface using the single-chain-in-mean-field theory. Through the numerical simulations, we study the adhesion/erasion transition of the system and show that the performance of the smart surface can be characterized by the difference between the effective nanoparticle-surface interactions in the UV-on and UV-off states. Further exploring the optimization of the smart surface, we find that the distribution function of the receptor can have typical bimodal characteristics, which is crucial for optimizing the position of the azo-bond along the azo-polymer, f. Moreover, the presence of the homopolymer is also essential for the optimal performance of the smart surface, and we build a reference map for the good combinations of f and the homopolymer design f_homo.

A photochromic upconversion nanoarchitecture: towards activatable bioimaging and dual NIR light-programmed singlet oxygen generation

A novel upconversion nanoarchitecture is designed, whose 980 nm light photosensitized activity could be activated by 808 nm light.

The precise control of singlet oxygen (¹O₂) generation is in great demand for biological studies and precision medicine. Here, a nanoarchitecture is designed and synthesized for generating ¹O₂ in a dual NIR light-programmable manner, while shifting to the therapeutic window. The nanoarchitecture is constructed by controlled synthesis of mesoporous silica-coated upconversion nanoparticles (UCNPs), wherein the porphyrin photosensitizers (PSs) are covalently embedded inside the silica walls while NIR (808 nm)-responsive diarylethene (DAE) photochromic switches are loaded in the nanopores. Upon irradiation with 980 nm NIR light, the UCNP core absorbs low energy photons and transfers energy to the PSs in the silica wall, leading to efficient ¹O₂ generation. Furthermore, this 980 nm NIR light photosensitized activity can be remotely controlled by irradiation with a distinct NIR wavelength (808 nm). The ¹O₂ generation is inhibited when the DAE installed in the nanopores is in the closed form, whereas irradiation of the nanoconstruct with 808 NIR light leads to the transformation of DAE to the open form, and thus enabling full recovery of the 980 nm NIR light excited ¹O₂ generation capability. The NIR light-mediated on-demand “activation” of the nanoarchitecture for bioimaging and controllable photodynamic therapy is further demonstrated in vitro and in vivo.

Pyro-Electrification of Freestanding Polymer Sheets: A New Tool for Cation-Free Manipulation of Cell Adhesion in vitro

Localized electric fields have become, in recent years, a source of inspiration to researchers and laboratories thanks to a huge amount of applications derived from it, including positioning of microparticles as building blocks for electrical, optical, and magnetic devices. The possibility of producing polymeric materials with surface charge thus opens new perspectives for applications where process simplicity and cost-effectiveness of flexible electronics are of fundamental importance. In particular, the influence of surface charges is widely studied and is a critical issue especially when new materials and functional technologies are introduced. Here, we report a voltage-free pyro-electrification (PE) process able to induce a permanent dipole orientation into polymer sheets under both mono- and bipolar distribution. The technique makes use of the pyroelectric effect for generating electric potentials on the order of kilovolts by an easy-to-accomplish thermal treatment of ferroelectric lithium niobate (LN) crystals. The PE allows us to avoid the expensive and time-consuming fabrication of high-power electrical circuits, as occurs in traditional generator-based techniques. Since the technique is fully compatible with spin-coating-based procedures, the pyro-electrified polymer sheets are easily peeled off the surface of the LN crystal after PE completion, thus providing highly stable and freestanding charged sheets. We show the reliability of the technique for different polymers and for different applications ranging from live cell patterning to biofilm formation tests for bacteria linked to food-processing environments.

Dynamic Synthetic Biointerfaces: From Reversible Chemical Interactions to Tunable Biological Effects

Dynamic synthetic biointerface is a new concept of biomaterials with smart surface properties capable of controlled display of bioactive ligands, dynamic modulation of cell-biomaterial interactions, and subsequently clever manipulation of fundamental cell behaviors like adhesion, migration, proliferation, differentiation, apoptosis, and so on. As mimics of the extracellular matrix (ECM), such molecularly dynamic biointerfaces have attracted increasing attention because of their tunable biological effects with great significance in in situ cell biology, tissue engineering, drug targeting, and cell isolation for cancer theranostics. Approaches to control bioligand presentation on materials mainly rely on surface functionalization with dynamic or reversible chemical linkers to which the ligands are tethered. Photoelectric-transformable or photocleavable chemistry, host-guest supramolecular chemistry, and multiple noncovalent interactions were initially employed for fabrication of dynamic synthetic biointerfaces. However, the external stimuli required in these systems, including electrochemical potential, electrochemical reaction, and near-infrared or UV light, are mostly invasive to living cells; and few of them are able to respond to the stimuli occurring in natural biological processes. In addition, most of current systems focused only on the control of cell adhesion, other cell behaviors like migration, differentiation and apoptosis have rarely been explored. Therefore, the development of novel synthetic biointerfaces that permit access to noninvasive control of diverse cell behaviors still represents a key challenge in biomaterials science. Our group pioneers the use of reversible covalent bonds, metal coordinative interactions, and the molecular affinity of molecularly imprinted synthetic receptors as the dynamic driving forces for the fabrication of smart biointerfaces. Several typical biological stimuli, such as glycemic volatility, body temperature fluctuations, regional disparity of pH values, and specific biomolecules, were tactfully involved in our systems. In this Account, we highlight the strategies we have used on the exploitation of dynamic synthetic biointerfaces based on the above three types of reversible chemical interactions. While our attention has been focused on biologically stimuli-responsive or other noninvasive ligand presentation, the versatility of dynamic synthetic biointerfaces in control of cell adhesion, directing cell differentiation, and targeting cell apoptosis has also been successfully demonstrated. In addition, a paradigm shift of dynamic synthetic biointerfaces from macroscopic to microscopic scale (e.g., nanobiointerfaces) was conceptually demonstrated in our research. The potential applications of these developed dynamic systems, including fundamental cell biology, surface engineering of biomaterials, scaffold-free tissue engineering, cell-based cancer diagnosis, and drug targeting cancer therapy, were also introduced, respectively. Although the development of dynamic synthetic biointerfaces is still in its infancy, we strongly believe that further efforts in this field will play a continuously and increasingly significant role in bridging the gap between chemistry and biology.

Sequential Photoactivation of Self-Assembled Monolayers to Direct Cell Adhesion and Migration

Dynamic substrates for cell culture control the spatial and temporal presentation of extracellular matrix ligands that interact with adherent cells. This paper reports a photoactive surface chemistry that can repeatedly activate regions of the substrate for cell adhesion, spreading, and migration. The approach uses self-assembled monolayers presenting the integrin ligand RGD that is caged with a nitrophenyl-based photoprotecting group. The group is also modified with a maltoheptaose oligosaccharide to prevent nonspecific protein adsorption and cell attachment. The peptide is uncaged when irradiated with a laser source at 405 nm on a microscope to reveal micron-size regions for single cell attachment. This method is applied to studies of gap junction-mediated communication between two neighboring cells and requires the patterning of an initial receiver cell population and then the patterning of a second sender population to give a culture wherein each pair of cells are separated by 30 μm. Finally, activation of the region between the cells permits cell-cell contact and gap junction assembly between the sender and receiver cells. This example demonstrates the broad relevance of this method to studying complex phenotypes in cell culture.

A Versatile Protein and Cell Patterning Method Suitable for Long-Term Neural Cultures

Herein, we present an easy-to-use protein and cell patterning method relying solely on pipetting, rinsing steps and illumination with a desktop lamp, which does not require any expensive laboratory equipment, custom-built hardware or delicate chemistry. This method is based on the adhesion promoter poly(allylamine)-grafted perfluorophenyl azide, which allows UV-induced cross-linking with proteins and the antifouling molecule poly(vinylpyrrolidone). Versatility is demonstrated by creating patterns with two different proteins and a polysaccharide directly on plastic well plates and on glass slides, and by subsequently seeding primary neurons and C2C12 myoblasts on the patterns to form islands and mini-networks. Patterning characterization is done via immunohistochemistry, Congo red staining, ellipsometry, and infrared spectroscopy. Using a pragmatic setup, patterning contrasts down to 5 μm and statistically significant long-term stability superior to the gold standard poly(l-lysine)-grafted poly(ethylene glycol) could be obtained. This simple method can be used in any laboratory or even in classrooms and its outstanding stability is especially interesting for long-term cell experiments, e.g., for bottom-up neuroscience, where well-defined microislands and microcircuits of primary neurons are studied over weeks.

Application of metasurface-enhanced infra-red spectroscopy to distinguish between normal and cancerous cell types

Fourier transform infrared (FTIR) spectra of biological cells can reveal clinically important information about cells' composition, including their normal or cancerous status. The recently emerged diagnostic technique of spectral cytopathology (SCP) combines FTIR with multivariate statistical analysis to detect cell abnormalities, differentiate between cell types, and monitor disease progression. We demonstrate a new variant of SCP, a metasurface-enhanced infrared reflection spectroscopic cytopathology (MEIRSC) that utilises judiciously designed plasmonic metasurfaces to localize and enhance the evanescent field near the cell's membrane, and to carry out spectroscopic interrogations of the cells attached to the metasurface using reflected infrared light. Our findings indicate that the MEIRSC approach enables us to differentiate between normal and cancerous human colon cells. The sensitivity of MEIRSC is such that a very small (about 50 nm deep) portion of the cell can yield valuable diagnostic information.

Coatings on mammalian cells: interfacing cells with their environment

The research community is intent on harnessing increasingly complex biological building blocks. At present, cells represent a highly functional component for integration into higher order systems. In this review, we discuss the current application space for cellular coating technologies and emphasize the relationship between the target application and coating design. We also discuss how the cell and the coating interact in common analytical techniques, and where caution must be exercised in the interpretation of results. Finally, we look ahead at emerging application areas that are ideal for innovation in cellular coatings. In all, cellular coatings leverage the machinery unique to specific cell types, and the opportunities derived from these hybrid assemblies have yet to be fully realized.

Tracking down the origin of peculiar vibrational spectra of aromatic self-assembled thiolate monolayers

Several studies have previously observed surprisingly low frequencies for the C-H stretching modes of self-assembled monolayers (SAMs) prepared from aromatic thiols. The reason for this property has so far remained elusive. Therefore, we report a novel study of the vibrational spectra of SAMs prepared on Au from two different aromatic thiols, namely, 4'-nitro-1,1'-biphenyl-4-thiol (NBPT) and 4-aminothiophenol (ATP). The SAMs were prepared by vapor deposition (VD) in ultrahigh vacuum (UHV) as well as by the solution method (SM) and their quality was controlled by X-ray photoelectron spectroscopy (XPS). In addition, amino terminated SAMs were also obtained by electron irradiation and by chemical reduction of NBPT SAMs. Beside infrared reflection absorption spectroscopy (IRRAS), we have employed high resolution electron energy loss spectroscopy (HREELS), by which VD SAMs can be studied in situ, i.e. without exposing them to air. Hence, we can exclude possible contributions of solvent molecules to the vibrational spectra. Nonetheless, HREELS in fact reveals the same large red shift of the C-H stretching modes in the SAMs as also observed in ex situ IRRAS experiments. In contrast, HREELS for physisorbed ATP and ATP in a KBr pellet measured by transmission infrared spectroscopy exhibit the expected aromatic bands. Using a computational approach, we can exclude molecular packing effects as origin of this shift. Therefore, we propose chemical changes in the aromatic rings during SAM formation as an alternative explanation for the observed frequency shift. As another striking effect, the N-H stretching vibrational modes of the amino-terminated SAMs are extremely weak in both IRRAS and HREELS despite the fact that XPS confirms the presence of amino groups. A very weak signal is observed only in the case of an electron irradiated NBPT SAM. In contrast, an energy loss ascribed to the N-H stretching vibrations is clearly observed in HREELS of ATP physisorbed on an ATP SAM and on graphite as well as in the transmission infrared spectrum of ATP in KBr. The extremely low intensity of these vibrations in the SAM is traced back to the inherently low transition dipole moment for the excitation of N-H stretching modes in free N-H groups. Furthermore, the calculations suggest that the much stronger signals of N-H stretching modes involved in hydrogen-bonding with adjacent amino groups are suppressed because these vibrations are oriented parallel to the surface.

Molecular bionics - engineering biomaterials at the molecular level using biological principles

Life and biological units are the result of the supramolecular arrangement of many different types of molecules, all of them combined with exquisite precision to achieve specific functions. Taking inspiration from the design principles of nature allows engineering more efficient and compatible biomaterials. Indeed, bionic (from bion-, unit of life and -ic, like) materials have gained increasing attention in the last decades due to their ability to mimic some of the characteristics of nature systems, such as dynamism, selectivity, or signalling. However, there are still many challenges when it comes to their interaction with the human body, which hinder their further clinical development. Here we review some of the recent progress in the field of molecular bionics with the final aim of providing with design rules to ensure their stability in biological media as well as to engineer novel functionalities which enable navigating the human body.

Reconfiguring surface functions using visible-light-controlled metal-ligand coordination

Most surfaces are either static or switchable only between “on” and “off” states for a specific application. It is a challenge to develop reconfigurable surfaces that can adapt to rapidly changing environments or applications. Here, we demonstrate fabrication of surfaces that can be reconfigured for user-defined functions using visible-light-controlled Ru–thioether coordination chemistry. We modify substrates with Ru complex Ru-H₂O. To endow a Ru-H₂O-modified substrate with a certain function, a functional thioether ligand is immobilized on the substrate via Ru–thioether coordination. To change the surface function, the immobilized thioether ligand is cleaved from the substrate by visible-light-induced ligand dissociation, and then another thioether ligand with a distinct function is immobilized on the substrate. Different thioethers endow the surface with different functions. Based on this strategy, we rewrite surface patterns, manipulate protein adsorption, and control surface wettability. This strategy enables the fabrication of reconfigurable surfaces with customizable functions on demand.

Configuring surfaces on-demand for desired functionalities is an ongoing challenge. Here, diverse and tailorable modifications of quartz and porous silica surfaces that are rapidly and reversibly switchable by the use of visible light are achieved via ruthenium-thioether coordination.

Independent Control over Multiple Cell Types in Space and Time Using Orthogonal Blue and Red Light Switchable Cell Interactions

Independent control over multiple cell-material interactions with high spatiotemporal resolution is a key for many biomedical applications and understanding cell biology, as different cell types can perform different tasks in a multicellular context. In this study, the binding of two different cell types to materials is orthogonally controlled with blue and red light providing independent regulation in space and time. Cells expressing the photoswitchable protein cryptochrome 2 (CRY2) on cell surface bind to N-truncated CRY-interacting basic helix-loop-helix protein 1 (CIBN)-immobilized substrates under blue light and cells expressing the photoswitchable protein phytochrome B (PhyB ) on cell surface bind to phytochrome interaction factor 6 (PIF6)-immobilized substrates under red light, respectively. These light-switchable cell interactions provide orthogonal and noninvasive control using two wavelengths of visible light. Moreover, both cell-material interactions are dynamically switched on under light and reversible in the dark. The specificity of the CRY2/CIBN and PhyB/PIF6 interactions and their response to different wavelengths of light allow selectively activating the binding of one cell type with blue and the other cell type with red light in the presence of the other cell type.

Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers

In this paper, fabrication methods that generate novel surfaces using the azlactone-based block co-polymer, poly (glycidyl methacrylate)-block-poly (vinyl dimethyl azlactone) (PGMA-b-PVDMA), are presented. Due to the high reactivity of azlactone groups towards amine, thiol, and hydroxyl groups, PGMA-b-PVDMA surfaces can be modified with secondary molecules to create chemically or biologically functionalized interfaces for a variety of applications. Previous reports of patterned PGMA-b-PVDMA interfaces have used traditional top-down patterning techniques that generate non-uniform films and poorly controlled background chemistries. Here, we describe customized patterning techniques that enable precise deposition of highly uniform PGMA-b-PVDMA films in backgrounds that are chemically inert or that have biomolecule-repellent properties. Importantly, these methods are designed to deposit PGMA-b-PVDMA films in a manner that completely preserves azlactone functionality through each processing step. Patterned films show well-controlled thicknesses that correspond to polymer brushes (~90 nm) or to highly crosslinked structures (~1-10 μm). Brush patterns are generated using either the parylene lift-off or interface directed assembly methods described and are useful for precise modulation of overall chemical surface reactivity by adjusting either the PGMA-b-PVDMA pattern density or the length of the VDMA block. In contrast, the thick, crosslinked PGMA-b-PVDMA patterns are obtained using a customized micro-contact printing technique and offer the benefit of higher loading or capture of secondary material due to higher surface area to volume ratios. Detailed experimental steps, critical film characterizations, and trouble-shooting guides for each fabrication method are discussed.

A photoelectrochemical platform for the capture and release of rare single cells

For many normal and aberrant cell behaviours, it is important to understand the origin of cellular heterogeneity. Although powerful methods for studying cell heterogeneity have emerged, they are more suitable for common rather than rare cells. Exploring the heterogeneity of rare single cells is challenging because these rare cells must be first pre-concentrated and undergo analysis prior to classification and expansion. Here, a versatile capture & release platform consisting of an antibody-modified and electrochemically cleavable semiconducting silicon surface for release of individual cells of interest is presented. The captured cells can be interrogated microscopically and tested for drug responsiveness prior to release and recovery. The capture & release strategy was applied to identify rare tumour cells from whole blood, monitor the uptake of, and response to, doxorubicin and subsequently select cells for single-cell gene expression based on their response to the doxorubicin.

Many cell capture systems exist but the characterisation and controlled release of single cells is a challenge. Here, the authors report on the development of a duel trigger release system using a combination of photo and electro triggers to allow for light based analysis without unwanted release.

Surface-modified polymers for cardiac tissue engineering

Cardiovascular disease (CVD), leading to myocardial infarction and heart failure, is one of the major causes of death worldwide. The physiological system cannot significantly regenerate the capabilities of a damaged heart. The current treatment involves pharmacological and surgical interventions; however, less invasive and more cost-effective approaches are sought. Such new approaches are developed to induce tissue regeneration following injury. Hence, regenerative medicine plays a key role in treating CVD. Recently, the extrinsic stimulation of cardiac regeneration has involved the use of potential polymers to stimulate stem cells toward the differentiation of cardiomyocytes as a new therapeutic intervention in cardiac tissue engineering (CTE). The therapeutic potentiality of natural or synthetic polymers and cell surface interactive factors/polymer surface modifications for cardiac repair has been demonstrated in vitro and in vivo. This review will discuss the recent advances in CTE using polymers and cell surface interactive factors that interact strongly with stem cells to trigger the molecular aspects of the differentiation or formulation of cardiomyocytes for the functional repair of heart injuries or cardiac defects.

Archaeal tetraether lipid coatings-A strategy for the development of membrane analog spacer systems for the site-specific functionalization of medical surfaces

The primary goal of our investigation was the development of a versatile immobilization matrix based on archaeal tetraether lipids that meets the most important prerequisites to render an implant surface bioactive by binding specific functional groups or functional polymers with the necessary flexibility and an optimal spatial arrangement to be bioavailable. From this point of view, it appears obvious that numerous efforts made recently to avoid initial bacterial adhesion on catheter surfaces as an important prerequisite of material associated infection episodes have shown only a limited efficiency since the bioactive entities could not be presented in an optimal conformation and a stable density. A significant improvement of this situation can be achieved by highly specific biomimetic modifications of the catheter surfaces. The term "biomimetic" originates from the fact that specific archaeal tetraether lipids were introduced to form a membrane analog monomolecular spacer system, which (1) can be immobilized on nearly all solid surfaces and (2) chemically modified to present a tailor-made functionality in contact with aqueous media either to avoid or inhibit surface fouling or to equip any implant surface with the necessary chemical functionality to enable cell adhesion and tissue integration. Ultrathin films based on tetraether lipids isolated from archaea Thermoplasma acidophilum were used as a special biomimetic immobilization matrix on the surface of commercial medical silicon elastomers. A complete performance control of the membrane analog coatings was realized in addition to biofunctionality tests, including the proof of cytotoxicity and hemocompatibility according to DIN EN ISO 10993. In order to make sure that the developed immobilization matrix including the grafted functional groups are biocompatible under in vivo-conditions, specific animal tests were carried out to examine the in vivo-performance. It can be concluded that the tetraether lipid based coating systems on silicone have shown no signs of cytotoxicity and a good hemocompatibility. Moreover, no mutagenic effects, no irritation effects, and no sensitization effects could be demonstrated. After an implantation period of 28 days, no irregularities were found.