Silver nanowires--unique templates for functional nanostructures

Fabrication of PHFPO Surface-Modified Conductive AgNWs/PNAGA Hydrogels with Enhanced Water Retention Capacity toward Highly Sensitive Strain Sensors

Conductive hydrogels, characterized by their unique features of flexibility, biocompatibility, electrical conductivity, and responsiveness to environmental stimuli, have emerged as promising materials for sensitive strain sensors. In this study, a facile strategy to prepare highly conductive hydrogels is reported. Through rational structural and synthetic design, silver nanowires (AgNWs) are incorporated into poly(N-acryloyl glycinamide) (PNAGA) hydrogels, achieving high electrical conductivity (up to 0.88 S m-1), significantly enhanced mechanical properties, and elevated deformative sensitivity. Furthermore, surface modification with polyhexafluoropropylene oxide (PHFPO) has substantially improved the water retention capacity and dressing comfort of this hydrogel material. Based on the above merits, these hydrogels are employed to fabricate highly sensitive wearable strain sensors which can detect and interpret subtle hand and finger movements and enable precise control of machine interfaces. The AgNWs/PNAGA based strain sensors can effectively sense finger motion, enabling the control of robotic fingers to replicate the human hand's gestures. In addition, the high deformative sensitivity and elevated water retention performance of the hydrogels makes them suitable for flow sensing. These conceptual applications demonstrate the potential of this conductive hydrogel in high-performance strain sensors in the future.

Tailor-Made Gold Nanomaterials for Applications in Soft Bioelectronics and Optoelectronics

In modern nanoscience and nanotechnology, gold nanomaterials are indispensable building blocks that have demonstrated a plethora of applications in catalysis, biology, bioelectronics, and optoelectronics. Gold nanomaterials possess many appealing material properties, such as facile control over their size/shape and surface functionality, intrinsic chemical inertness yet with high biocompatibility, adjustable localized surface plasmon resonances, tunable conductivity, wide electrochemical window, etc. Such material attributes have been recently utilized for designing and fabricating soft bioelectronics and optoelectronics. This motivates to give a comprehensive overview of this burgeoning field. The discussion of representative tailor-made gold nanomaterials, including gold nanocrystals, ultrathin gold nanowires, vertically aligned gold nanowires, hard template-assisted gold nanowires/gold nanotubes, bimetallic/trimetallic gold nanowires, gold nanomeshes, and gold nanosheets, is begun. This is followed by the description of various fabrication methodologies for state-of-the-art applications such as strain sensors, pressure sensors, electrochemical sensors, electrophysiological devices, energy-storage devices, energy-harvesting devices, optoelectronics, and others. Finally, the remaining challenges and opportunities are discussed.

MXene/AgNW composite material for selective and efficient removal of radioactive cesium and iodine from water

Toxic fission products, such as cesium (137Cs) and iodine (129I) are of great concern because of their long half-lives and high solubility in water. The simultaneous removal of Cs and I using a single adsorbent is an area of increasing interest. In this study, MXene/silver nanowire (AgNW) composite was synthesized through physical mixing and employed for simultaneous removal of iodide (I-) and cesium (Cs+) ions from contaminated water. The MXene/AgNW composite demonstrated excellent adsorption capacities of 84.70 and 26.22 mg/g for I- and Cs+, respectively. The experimental data supported the hypothesis of multilayer adsorption of Cs+ owing to the inter-lamellar structures and the presence of heterogeneous adsorption sites in MXene. The interaction between I- and the AgNW involved chemisorption followed by monolayer adsorption. MXene/AgNW composite material exhibited promising results in the presence of competitive ions under extreme pH conditions. Thus, synthesized composite materials holds promising potential as an adsorbent for the remediation of radioactive liquid waste.

First-principles study of mercaptoundecanoic acid molecule adsorption and gas molecule penetration onto silver surface: an insight for corrosion protection

Recently, 11-mercaptoundecanoic acid (MUA) molecule has attracted attention as a promising passivation agent of Ag nanowire (NW) network electrode for corrosion inhibition, but the underneath mechanism has not been elaborated. In this work, we investigate adsorption of MUA molecule on Ag(1 0 0) and Ag(1 1 1) surface, adsorption of air gas molecules of H2O, H2S and O2 on MUA molecular end surface, and their penetrations into the Ag surface using the first-principles calculations. Our calculations reveal that the MUA molecule is strongly bound to the Ag surface with the binding energies ranging from -0.47 to -2.06 eV and the Ag-S bond lengths of 2.68-2.97 Å by Lewis acid-base reaction. Furthermore, we find attractive interactions between the gas molecules and the MUA@Ag complexes upon their adsorptions and calculate activation barriers for their migrations from the outermost end of the complexes to the top of Ag surface. It is found that the penetrations of H2O and H2S are more difficult than the O2 penetration due to their higher activation barriers, while the O2 penetration is still difficult, confirming the corrosion protection of Ag NW network by adsorbing the uniform monolayer of MUA. With these findings, this work can contribute to finding a better passivation agent in the strategy of corrosion protection of Ag NW network electrode.

Bubble-Mediated Large-Scale Hierarchical Assembly of Ultrathin Pt Nanowire Network Monolayer at Gas/Liquid Interfaces

Extensive macroscale two-dimensional (2-D) platinum (Pt) nanowire network (NWN) sheets are created through a hierarchical self-assembly process with the aid of biomolecular ligands. The Pt NWN sheet is assembled from the attachment growth of 1.9 nm-sized 0-D nanocrystals into 1-D nanowires featuring a high density of grain boundaries, which then interconnect to form monolayer network structures extending into centimeter-scale size. Further investigation into the formation mechanism reveals that the initial emergence of NWN sheets occurs at the gas/liquid interfaces of the bubbles produced by sodium borohydride (NaBH₄) during the synthesis process. Upon the rupture of these bubbles, an exocytosis-like process releases the Pt NWN sheets at the gas/liquid surface, which subsequently merge into a continuous monolayer Pt NWN sheet. The Pt NWN sheets exhibit outstanding oxygen reduction reaction (ORR) activities, with specific and mass activities 12.0 times and 21.2 times greater, respectively, than those of current state-of-the-art commercial Pt/C electrocatalysts.

Self-Healing and Self-Adhesive Substrate-Free Tattoo Electrode

Electronic tattoos have great potential application in the biomedical field; moreover, the substrate-free electronic tattoo offers better comfortability and conformal contact. However, the substrate-free electronic tattoo is more prone to malfunction, including fall off and fracture. In this paper, a self-healing and self-adhesive substate-free tattoo based on PEDOT: PSS is studied and reported. The dry composite electrode will turn into self-healing material while it transforms into hydrogel, and a cut with a width up to 24 μm could be healed in 1 s. In terms of adhesion performance, the substrate-free electrode can hang a 28.2 g weight by a contact area of 8 mm × 8 mm. Additionally, the substate-free electrode could maintain fully conformal contact with porcine skin in 15 days by its self-adhesiveness. When applied as a substrate-free tattoo, the contact impedance and ECG signal measurement performance before and after self-healing are almost the same. At a frequency of 10 Hz, the contact impedance of the undamaged electrode, healed electrode, and Ag/AgCl gel electrode are 32.2 kΩ, 39.2 kΩ, and 62.9 kΩ, respectively. In addition, the ECG signals measured by the undamaged electrode and healed electrode are comparable to that of Ag/AgCl electrode. The self-healing and self-adhesive substrate-free tattoo electrode reported here has broad application in health monitoring.

Bio-Inspired Transparent Soft Jellyfish Robot

Jellyfish are among the widely distributed nature creatures that can effectively control the fluidic flow around their transparent soft body, thus achieving movements in the water and camouflage in the surrounding environments. Till now, it remains a challenge to replicate both transparent appearance and functionalities of nature jellyfish in synthetic systems due to the lack of transparent actuators. In this work, a fully transparent soft jellyfish robot is developed to possess both transparency and bio-inspired omni motions in water. This robot is driven by transparent dielectric elastomer actuators (DEAs) using hybrid silver nanowire networks and conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/waterborne polyurethane as compliant electrodes. The electrode exhibits large stretchability, low stiffness, high transmittance, and excellent conductivity at large strains. Consequently, the highly transparent DEA based on this hybrid electrode, with Very-High-Bond membranes as dielectric layers and polydimethylsiloxane as top coating, can achieve a maximum area strain of 146% with only 3% hysteresis loss. Driven by this transparent DEA, the soft jellyfish robot can achieve vertical and horizontal movements in water, by mimicking the actual pulsating rhythm of an Aurelia aurita. The bio-inspired robot can serve multiple functions as an underwater soft robot. The hybrid electrodes and bio-inspired design approach are potentially useful in a variety of soft robots and flexible devices.

Colloidal Synthesis of Metal Nanocrystals: From Asymmetrical Growth to Symmetry Breaking

Nanocrystals offer a unique platform for tailoring the physicochemical properties of solid materials to enhance their performances in various applications. While most work on controlling their shapes revolves around symmetrical growth, the introduction of asymmetrical growth and thus symmetry breaking has also emerged as a powerful route to enrich metal nanocrystals with new shapes and complex morphologies as well as unprecedented properties and functionalities. The success of this route critically relies on our ability to lift the confinement on symmetry by the underlying unit cell of the crystal structure and/or the initial seed in a systematic manner. This Review aims to provide an account of recent progress in understanding and controlling asymmetrical growth and symmetry breaking in a colloidal synthesis of noble-metal nanocrystals. With a touch on both the nucleation and growth steps, we discuss a number of methods capable of generating seeds with diverse symmetry while achieving asymmetrical growth for mono-, bi-, and multimetallic systems. We then showcase a variety of symmetry-broken nanocrystals that have been reported, together with insights into their growth mechanisms. We also highlight their properties and applications and conclude with perspectives on future directions in developing this class of nanomaterials. It is hoped that the concepts and existing challenges outlined in this Review will drive further research into understanding and controlling the symmetry breaking process.

Room-Temperature ppb-Level H2S Gas Sensors Based on Ag Nanowire/Hollow PPy Nanotube Nanocomposites

H2S gas sensors were fabricated using Ag nanowire/hollow polypyrrole nanotube nanocomposite (Ag NW/hollow PPy NT) film for sensing ppb-level H2S gas at room temperature. The morphology, phase composition and crystalline structure of Ag NW/hollow PPy NT nanocomposites were analyzed via scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD) and Fourier-transform infrared spectroscopy (FTIR). TEM and SEM images revealed that Ag NWs were well dispersed in the hollow PPy NT matrix. IR results showed no interaction between Ag NWs and hollow PPy NTs in the Ag NW/hollow PPy NT nanocomposites. The effect of the amount of added Ag NWs on the response of the Ag NW/hollow PPy NT nanocomposites to the ppb-level H2S gas was investigated. Comparative gas-sensing results revealed that the introduction of Ag NWs onto hollow PPy NTs was effective in promoting the sensor response to H2S gas. More importantly, the Ag NW/hollow PPy NT nanocomposite had a strong response to ppb-level H2S gas at room temperature.

Synthesis and characterization of PCU@C-Ag/AgCl nanoparticles as an antimicrobial material for respiratory tract infection

The pregnant cow urine (PCU) is an active source of antimicrobial agents that is used for fabricating chitosan coated Ag/AgCl nanoparticles (NPs) in the present study. These PCU@C-Ag/AgCl NPs were physicochemically characterized and evaluated for antimicrobial activity against selected respiratory tract infection (RTI) pathogens. The absorption band around 420 nm in UV-Visible spectrum indicated the presence of Ag NPs. The spherical shape of NPs was observed using TEM. Also, the crystalline structure was confirmed using the XRD pattern. The PCU@C-Ag/AgCl NPs showed strong antimicrobial activity against all tested RTI pathogens. In addition, FESEM analysis showed morphological changes in RTI bacterial pathogens. Thereby, PCU@C-Ag/AgCl NPs may be used as an antimicrobial material to treat RTIs in near future at clinical level.

UV-Light Mediated Biosynthesis of Silver Nanowires; Characterization, Dye Degradation Potential and Kinetic Studies

Herrin, a simple and eco-friendly method for the synthesis of silver nanowires (Ag-NWs) has been reported. Silver nanowires were synthesized using Psidium guajava seed extract that acted as a reducing agent as well as a stabilizing agent for silver nitrate solution. Synthesis was carried out at 50 °C temperature under continuous UV-irradiation. Silver nanowires were initially characterized by a UV-visible and FTIR spectrophotometer. In addition, morphology and particle size of synthesized Ag-NWs were determined using Field Emission Scanning Electron Microscopy and X-ray diffraction (XRD) techniques. Nanowires were found to have 12.8 μm length and 200–500 nm diameter and cubic phase morphology. Furthermore, the catalytic potential of Ag-NWs for the degradation of methyl orange dye (MO) was determined. The selected dye was degraded successfully that confirmed the catalytic potential of Ag-NWs. The authors concluded that Ag-NWs can be synthesized using plant extract having excellent morphological features as well as impressive catalytic potential.

Synthesis, characterization and application of intracellular Ag/AgCl nanohybrids biosynthesized in Scenedesmus sp. as neutral lipid inducer and antibacterial agent

The current research focuses on the Intracellular biosynthesis of Ag/AgCl nanohybrids in microalgae, Scenedesmus sp. The effect of biosynthesis process on growth and lipid profile of cells is key element of this study. Ag/AgCl nanohybrids synthesized intracellularly were characterized by UV-Vis spectrophotometer, Powder X-Ray Diffraction (P-XRD), Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HRTEM). 10-20 nm and 10-50 nm sized spherical shaped nanoparticles of polycrystalline nature were grown using 0.5 and 1 mM of AgNO₃ precursor, respectively and Scenedesmus sp. as reducing agent. Total lipid content of the cells treated with 0.5 mM and 1 mM AgNO₃ was static and found to be 43.2 ± 0.01 μg/mL and 48.2 ± 0.02 μg/mL respectively at 120 h of Ag/AgCl nanoparticles biosynthesis. FAME (Fatty Acid Methyl Ester) profile was improved due to intracellular nanoparticles biosynthesis with maximum C16:0 (palmitic acid) (35.7%) in cells treated with 0.5 mM AgNO₃ used for Ag/AgCl nanohybrids synthesis. Palmitic acid in cells exposed to 0.5 mM concentration of metallic precursor increased by 75.86%. Synthesized nanoparticles were tested on four bacterial strains to establish its antibacterial efficiency showing appropriate zone of inhibition at varying concentrations. Present study efficiently demonstrates the utility of microalgae integrating nanoparticles biosynthesis and lipid accumulation.

The smart growth of self-assembled silver nanoloops

Enclosed silver nanoloops have unique features in manipulating and controlling light. However, even the conception of their growth mechanism has not been established. The intermediate structure at the growth stage were revealed as the crucial issue for studying their smart growth mechanism of silver nanoloops and nanowires. Early growth stage showed that silver nanorods and nanoparticles were grown in their respective polyvinylpyrrolidone micelles. Then, the silver nanorods and nanoparticles were assembled in a rod-particle-rod pattern via micelle-micelle coupling, forming linear silver nanowires. These silver nanowires were attracted by Van der Waals forces forming the initial nanoloop. Notably, there was a silver nanoparticle between the ends of two adjacent nanowires. This silver nanoparticle acted like solder and played a crucial role in connecting the two adjacent nanowires; consequently, a silver nanoloop was formed. This finding also suggested that similar smart growth patterns might exist for other one-dimensional and looped nanomaterials.

Plasmon-enhanced hydrogen evolution reaction on a Ag-branched-nanowire/Pt nanoparticle/AgCl nanocomposite

A plasmon-enhanced photocatalytic system was designed with Ag-Pt-AgCl nanocomposites. Branched nanowires of Ag (AgBNWs) were first synthesized on indium-doped tin oxide-coated glass by electrodeposition. Then, the AgBNWs were dipped into an aqueous solution of Na2[PtCl6] at different concentrations from 1 to 5 mM to deposit Pt nanoparticles (PtNPs) on the AgBNWs via galvanic displacement. During the PtNP deposition, eluted Ag+ ions reacted with Cl- ions to precipitate AgCl on the AgBNWs. The obtained AgBNW/PtNP/AgCl nanocomposites exhibited plasmonic absorption at approximately 465 nm. The nanocomposites were then examined as photoelectrodes for hydrogen evolution. The hybridization of the PtNPs on the AgBNWs significantly decreased the overpotential for water splitting in the dark, and the large number of PtNPs resulted in a higher efficiency compared to a conventional catalyst. Under blue-light irradiation (479 nm, 100 mW cm-2), the overpotential decreased by -110 mV, and the current density increased by 27.8 mA cm-2. Under red-light irradiation (631 nm, 100 mW cm-2), the shift in onset potential was small, which could be attributed to the mismatching of the plasmonic absorption band with the excitation wavelength. The nanocomposite without AgCl (AgBNW/PtNP) was less effective at lowering the overpotential but more effective at improving the onset potential than AgBNW/PtNP/AgCl. These electrochemical behaviors were explained by the synergistic effect of the plasmon-induced photocurrent and charge transfer between Ag, Pt, and AgCl. The nanocomposite retained its photocatalytic activity after 400 cycles; therefore, the AgBNW/PtNP/AgCl nanocomposite could be useful for hydrogen evolution devices.

Silver Nanowire Synthesis and Strategies for Fabricating Transparent Conducting Electrodes

One-dimensional metal nanowires, with novel functionalities like electrical conductivity, optical transparency and high mechanical stiffness, have attracted widespread interest for use in applications such as transparent electrodes in optoelectronic devices and active components in nanoelectronics and nanophotonics. In particular, silver nanowires (AgNWs) have been widely researched owing to the superlative thermal and electrical conductivity of bulk silver. Herein, we present a detailed review of the synthesis of AgNWs and their utilization in fabricating improved transparent conducting electrodes (TCE). We discuss a range of AgNW synthesis protocols, including template assisted and wet chemical techniques, and their ability to control the morphology of the synthesized nanowires. Furthermore, the use of scalable and cost-effective solution deposition methods to fabricate AgNW based TCE, along with the numerous treatments used for enhancing their optoelectronic properties, are also discussed.

Far-field optical imaging of surface plasmons with a subdiffraction limited separation

When an ultrathin silver nanowire with a diameter less than 100 nm is placed on a photonic band gap structure, surface plasmons can be excited and propagate along two side-walls of the silver nanowire. Although the diameter of the silver nanowire is far below the diffraction limit, two bright lines can be clearly observed at the image plane by a standard wide-field optical microscope. Simulations suggest that the two bright lines in the far-field are caused by the unique phase distribution of plasmons on the two side-walls of the silver nanowire. Combining with the sensing ability of surface plasmons to its environment, the configuration reported in this work is capable of functioning as a sensing platform to monitor environmental changes in the near-field region of this ultrathin nanowire.

Inkjet printing of silver nanowires on flexible surfaces and methodologies to improve the conductivity and stability of the printed patterns

Silver nanowires (AgNWs) are known to be used for printing on rigid as well as flexible surfaces. Here we have developed a systematic approach for using AgNWs synthesized by the polyol method for printing on flexible surfaces using a simple inkjet printing method. Optimized ink formulation used in this work comprises a mixture of Ag NWs suspended in ethylene glycol directly taken after synthesis and isopropyl alcohol. Using such formulation saves time and loss of material while transferring to other solvents, which is the usual practice. The printed patterns demonstrate high conductivity and stability over many months, which can revolutionize the applications of functional nanomaterials in low-cost printed electronics. The importance of fragmentation of nanowires only to achieve specific aspect ratios, to facilitate easy jetting and to prevent clogging is demonstrated. Varied concentrations (10 mg mL^-1 to 50 mg mL^-1) of Ag NWs are used in ink formulations in order to print highly conductive patterns (resistance < 50 Ω sq^-1) in a minimal number of passes. The same composition was also seen to facilitate simple and time-efficient nano-welding at room temperature, which improves the conductivity and stability of the printed patterns.

Growth mechanism and photoelectric properties of a silver nanowire network prepared by solid state ionics method

A macroscopic silver nanowire (AgNW) network is grown by solid state ionics method. The ion flow during growth of the AgNW network is controlled by maintaining a current in the order of 10^-7 A. Scanning electron microscopy (SEM) analysis reveals that the growth direction of AgNWs in the network is irregular and spread evenly in all directions and the nanowires are 40-160 nm in diameter. The microcosmic mechanism of silver nanostructures grown by the solid state ionics method is established by real time and in situ SEM analysis of the growth process of the AgNW networks. To study the photoelectric properties of the network, a self-supported AgNW network sample (∼1 mm wide and 8 mm long) is irradiated with lasers of different wavelengths of 375, 405, 532, 633, 808, and 1064 nm and 10.6 μm, and changes in the current between the two ends of the sample are recorded. The network displays negative photoconductance effect, and the maximum light responsivity is 43 mA W^-1. The network displays light responsivity in the ultraviolet light-to-mid-infrared light region, with response times of tens of milliseconds. These findings indicate that the AgNW network has broad application prospect in ultra-wide spectrum photoelectric detection.

Exploring High Aspect Ratio Gold Nanotubes as Cytosolic Agents: Structural Engineering and Uptake into Mesothelioma Cells

The generation of effective and safe nanoagents for biological applications requires their physicochemical characteristics to be tunable, and their cellular interactions to be well characterized. Here, the controlled synthesis is developed for preparing high-aspect ratio gold nanotubes (AuNTs) with tailorable wall thickness, microstructure, composition, and optical characteristics. The modulation of optical properties generates AuNTs with strong near infrared absorption. Surface modification enhances dispersibility of AuNTs in aqueous media and results in low cytotoxicity. The uptake and trafficking of these AuNTs by primary mesothelioma cells demonstrate their accumulation in a perinuclear distribution where they are confined initially in membrane-bound vesicles from which they ultimately escape to the cytosol. This represents the first study of the cellular interactions of high-aspect ratio 1D metal nanomaterials and will facilitate the rational design of plasmonic nanoconstructs as cytosolic nanoagents for potential diagnosis and therapeutic applications.

Gold nanotubes: synthesis, properties and biomedical applications

This review (with 106 references) summarizes the latest progress in the synthesis, properties and biomedical applications of gold nanotubes (AuNTs). Following an introduction into the field, a first large section covers two popular AuNTs synthesis methods. The hard template method introduces anodic alumina oxide template (AAO) and track-etched membranes (TeMs), while the sacrificial template method based on galvanic replacement introduces bimetallic, trimetallic AuNTs and AuNT-semiconductor hybrid materials. Then, the factors affecting the morphology of AuNTs are discussed. The next section covers their unique surface plasmon resonance (SPR), surface-enhanced Raman scattering (SERS) and their catalytic properties. This is followed by overviews on the applications of AuNTs in biosensors, protein transportation, photothermal therapy and imaging. Several tables are presented that give an overview on the wealth of synthetic methods, morphology factors and biological application. A concluding section summarizes the current status, addresses current challenges and gives an outlook on potential applications of AuNTs in biochemical detection and drug delivery.Graphical abstract.

Autophagy Modulated by Inorganic Nanomaterials

With the rapid development of nanotechnology, inorganic nanomaterials (NMs) have been widely applied in modern society. As human exposure to inorganic NMs is inevitable, comprehensive assessment of the safety of inorganic NMs is required. It is well known that autophagy plays dual roles in cell survival and cell death. Moreover, inorganic NMs have been proven to induce autophagy perturbation in cells. Therefore, an in-depth understanding of inorganic NMs-modulated autophagy is required for the safety assessment of inorganic NMs. This review presents an overview of a set of inorganic NMs, consisting of iron oxide NMs, silver NMs, gold NMs, carbon-based NMs, silica NMs, quantum dots, rare earth oxide NMs, zinc oxide NMs, alumina NMs, and titanium dioxide NMs, as well as how each modulates autophagy. This review emphasizes the potential mechanisms underlying NMs-induced autophagy perturbation, as well as the role of autophagy perturbation in cell fate determination. Furthermore, we also briefly review the potential roles of inorganic NMs-modulated autophagy in diagnosis and treatment of disease.

Recent Advances on Controlled Synthesis and Engineering of Hollow Alloyed Nanotubes for Electrocatalysis

The past decade has witnessed great progress in the synthesis and electrocatalytic applications of 1D hollow alloy nanotubes with controllable compositions and fine structures. Hollow nanotubes have been explored as promising electrocatalysts in the fuel cell reactions due to their well-controlled surface structure, size, porosity, and compositions. In addition, owing to the self-supporting ability of 1D structure, hollow nanotubes are capable of avoiding catalyst aggregation and carbon corrosion during the catalytic process, which are two other issues for the widely investigated carbon-supported nanoparticle catalysts. It is currently a great challenge to achieve high activity and stability at a relatively low cost to realize commercialization of these catalysts. An overview of the structural and compositional properties of 1D hollow alloy nanotubes, which provide a large number of accessible active sites, void spaces for electrolytes/reactants impregnation, and structural stability for suppressing aggregation, is presented. The latest advances on several strategies such as hard template and self-templating methods for controllable synthesis of hollow alloyed nanotubes with controllable structures and compositions are then summarized. Benefiting from the advantages of the unique properties and facile synthesis approaches, the capability of 1D hollow nanotubes is then highlighted by discussing examples of their applications in fuel-cell-related electrocatalysis. Finally, the remaining challenges and potential solutions in the field are summarized to provide some useful clues for the future development of 1D hollow alloy nanotube materials.

Increasing Silver Nanowire Network Stability through Small Molecule Passivation

Silver nanowire (AgNW) transparent electrodes show promise as an alternative to indium tin oxide (ITO). However, these nanowire electrodes degrade in air, leading to significant resistance increases. We show that passivating the nanowire surfaces with small organic molecules of 11-mercaptoundecanoic acid (MUA) does not affect electrode transparency contrary to typical passivation films, and is inexpensive and simple to deposit. The sheet resistance of a 32 nm diameter silver nanowire network coated with MUA increases by only 12% over 120 days when exposed to atmospheric conditions but kept in the dark. The increase is larger when exposed to daylight (588%), but is still nearly two orders of magnitude lower than the resistance increase of unpassivated networks. The difference between the experiments performed under daylight versus the dark exemplifies the importance of testing passivation materials under light exposure.

Rational synthesis of silver nanowires at an electrode interface by diffusion limitation

We report an approach to synthesize silver nanowires by diffusion limitation.

Silver Nanowire-Based Fluorescence Thermometer for a Single Cell

A fluorescence thermometer based on silver nanowires (AgNWs) is realized by assembling Texas Red (TR)-marked thermal-sensitive DNA stem-loops (TR-DNA stem-loop) on the surface of AgNWs. Temperature configures the structure of the TR-DNA stem-loop and resultantly adjusts the energy transfer between TR and the AgNWs, which could sensitively control the fluorescence intensity of the thermometer. The thermometer is sensitive to the temperature ranging from 30 to 40 °C with the sensitivity of 2.6%/°C. Under the assistance of laser confocal microscopy, a temperature change within a single cell was observed by the monofilament AgNW-based thermometer.

Silver nanowires as infrared-active materials for surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) is increasing in significance as a bioanalytical tool. Novel nanostructured metal substrates are required to improve performances and versatility of SERS spectroscopy. In particular, as biological tissues are relatively transparent in the infrared wavelength range, SERS-active materials suitable for infrared laser excitation are needed. Nanowires appear interesting in this respect as they show a very broad localized surface plasmon resonance band, ranging from near UV to near infrared wavelengths. The SERS activity of silver nanowires has been tested at three wavelengths and a fair enhancement at 1064 and 514 nm has been observed, whereas a very weak enhancement was present when exciting close to the nanowire extinction maximum. These experimentally measured optical properties have been contrasted with finite element method simulations. Furthermore, laser-induced optoacoustic spectroscopy measurements have shown that the extinction at 1064 nm is completely due to scattering. This result has an important implication that no heating occurs when silver nanowires are utilized as SERS-active substrates, thereby preventing possible thermal damage.

Spontaneous and Selective Nanowelding of Silver Nanowires by Electrochemical Ostwald Ripening and High Electrostatic Potential at the Junctions for High-Performance Stretchable Transparent Electrodes

Metal nanowires have been gaining increasing attention as the most promising stretchable transparent electrodes for emerging field of stretchable optoelectronic devices. Nanowelding technology is a major challenge in the fabrication of metal nanowire networks because the optoelectronic performances of metal nanowire networks are mostly limited by the high junction resistance between nanowires. We demonstrate the spontaneous and selective welding of Ag nanowires (AgNWs) by Ag solders via an electrochemical Ostwald ripening process and high electrostatic potential at the junctions of AgNWs. The AgNWs were welded by depositing Ag nanoparticles (AgNPs) on the conducting substrate and then exposing them to water at room temperature. The AgNPs were spontaneously dissolved in water to form Ag⁺ ions, which were then reduced to single-crystal Ag solders selectively at the junctions of the AgNWs. Hence, the welded AgNWs showed higher optoelectronic and stretchable performance compared to that of as-formed AgNWs. These results indicate that electrochemical Ostwald ripening-based welding can be used as a promising method for high-performance metal nanowire electrodes in various next-generation devices such as stretchable solar cells, stretchable displays, organic light-emitting diodes, and skin sensors.

Extending the Propagation Distance of a Silver Nanowire Plasmonic Waveguide with a Dielectric Multilayer Substrate

Chemical-synthesized silver nanowires have been proven as an efficient architecture for plasmonic waveguides, but the high propagation loss prevents their widely applications. Here, we demonstrate that the propagation distance of the plasmons along a silver nanowire can be extended if this nanowire was placed on a dielectric multilayer substrate containing a photonic band gap but not placed on a commonly used glass substrate. The propagation distance at 630 nm wavelength can reach 16 μm, even when the silver nanowire is as thin as 90 nm in diameter. Experimental and simulation results further show that the polarization of this propagating plasmon mode was nearly parallel to the surface of the dielectric multilayer, so it can be excited by a transverse-electric polarized Bloch surface wave propagating along a polymer nanowire with diameter at only about 170 nm on the same dielectric multilayer. Numerical simulations were also carried out and are consistent with the experiment results. Our work provides a platform with which to extend the propagation distance of the plasmonic waveguide and also for the integration between photonic and plasmonic waveguides on the nanometer scale.

Enhanced flexibility and electron-beam-controlled shape recovery in alumina-coated Au and Ag core-shell nanowires

The proper choice of coating materials and methods in core-shell nanowire (NW) engineering is crucial to assuring improved characteristics or even new functionalities of the resulting composite structures. In this paper, we have reported electron-beam-induced reversible elastic-to-plastic transition in Ag/Al₂O₃ and Au/Al₂O₃ NWs prepared by the coating of Ag and Au NWs with Al₂O₃ by low-temperature atomic layer deposition. The observed phenomenon enabled freezing the bent core-shell NW at any arbitrary curvature below the yield strength of the materials and later restoring its initially straight profile by irradiating the NW with electrons. In addition, we demonstrated that the coating efficiently protects the core material from fracture and plastic yield, allowing it to withstand significantly higher deformations and stresses in comparison to uncoated NW.

Stable and Controllable Synthesis of Silver Nanowires for Transparent Conducting Film

Silver nanowires without particles are synthesized by a solvothermal method at temperature 150 °C. Silver nanowires are prepared via a reducing agent of glycerol and a capping agent of polyvinylpyrrolidone (M _w  ≈ 1,300,000). Both of them can improve the purity of the as-prepared silver nanowires. With controllable shapes and sizes, silver nanowires are grown continuously up to 10-20 μm in length with 40-50 nm in diameter. To improve the yield of silver nanowires, the different concentrations of AgNO₃ synthesis silver nanowires are discussed. The characterizations of the synthesized silver nanowires are analyzed by UV-visible absorption spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscope (AFM), and silver nanowires are pumped on the cellulose membrane and heated stress on the PET. Then, the cellulose membrane is dissolved by the steam of acetone to prepare flexible transparent conducting thin film, which is detected 89.9 of transmittance and 58 Ω/□. Additionally, there is a close loop connected by the thin film, a blue LED, a pair of batteries, and a number of wires, to determinate directly the film if conductive or not.

Silver Nanowires for Reconfigurable Bloch Surface Waves

The use of a single silver nanowire as a flexible coupler to transform a free space beam into a Bloch surface wave propagating on a dielectric multilayer is proposed. Based on Huygens' Principle, when a Gaussian beam is focused onto a straight silver nanowire, a Bloch surface wave is generated and propagates perpendicular to the nanowire. By curving the silver nanowire, the surface wave can be focused. Furthermore, the spatial phase of the incident laser beam can be actively controlled with the aid of a spatial light modulator, resulting in the reconfigurable or dynamically controlled Bloch surface waves. The low cost of the chemically synthesized silver nanowires and the high flexibility with regard to tuning the spatial phase of the incident light make this approach very promising for various applications including optical micromanipulation, fluorescence imaging, and sensing.

N-Doped Porous Carbon Nanofibers/Porous Silver Network Hybrid for High-Rate Supercapacitor Electrode

A three-dimensional cross-linked porous silver network (PSN) is fabricated by silver mirror reaction using polymer foam as the template. The N-doped porous carbon nanofibers (N-PCNFs) are further prepared on PSN by chemical vapor deposition and treated by ammonia gas subsequently. The PSN substrate serving as the inner current collector will improve the electron transport efficiency significantly. The ammonia gas can not only introduce nitrogen doping into PCNFs but also increase the specific surface area of PCNFs at the same time. Because of its large surface area (801 m²/g), high electrical conductivity (211 S/cm), and robust structure, the as-constructed N-PCNFs/PSN demonstrates a specific capacitance of 222 F/g at the current density of 100 A/g with a superior rate capability of 90.8% of its initial capacitance ranging from 1 to 100 A/g while applied as the supercapacitor electrode. The symmetric supercapacitor device based on N-PCNFs/PSN displays an energy density of 8.5 W h/kg with power density of 250 W/kg and excellent cycling stability, which attains 103% capacitance retention after 10 000 charge-discharge cycles at a high current density of 20 A/g, which indicates that N-PCNFs/PSN is a promising candidate for supercapacitor electrode materials.

AuAg@CdS double-walled nanotubes: synthesis and nonlinear absorption properties

Novel AuAg@CdS double-walled nanotubes (DWNTs) were successfully fabricated through a three-step solvothermal method, starting with silver nanowires as the template. In the DWNTs, a uniform layer of a CdS shell is coated onto the AuAg nanotubes, finally forming the one-dimensional nanocomposites. Nonlinear optical analysis indicated that the plasmon-exciton interaction in the AuAg@CdS DWNTs induced an obviously saturated absorption response under visible light excitation, in contrast to individual AuAg nanotubes and CdS shells. Furthermore, the effective nonlinear absorption coefficient of the AuAg@CdS DWNTs was 7 times larger than that of the CdS shell, which was attributed to the local field enhancement effect. Such a unique morphological configuration and optical properties make AuAg@CdS DWNTs an ideal candidate for next generation nano-photonic devices employed as a mode-locking element, optical switch, and so on.

Curving silver nanowires using liquid droplets for highly stretchable and durable percolation networks

Silver (Ag) nanowires (NWs) are promising building blocks for the fabrication of stretchable electrodes, but they may undergo mechanical fracture at low tensile strains, which leads to degradation in electrical performance of Ag NW-based stretchable electrodes. Here we report on a simple route to create the percolation networks of Ag NW rings via a conventional spray coating process. We discovered that Ag NWs can be bent into curved shapes within micrometer-sized liquid droplets generated during the spraying process due to elasto-capillary interaction. This curving phenomenon allowed the deposition of Ag NW rings directly on a desired substrate without the need for any complicated process. The network of Ag NW rings effectively releases the applied tensile strains thanks to curved shapes of the constituent NWs, enabling the achievement of excellent electromechanical stability as well as high stretchability. Our approach not only provides a simple, low cost, and scalable route to the fabrication of high-performance Ag NW-based stretchable electrodes, but also opens a new and useful way of engineering the structure of NWs for various applications.

Multifunctionality of silver closo-boranes

Silver compounds share a rich history in technical applications including photography, catalysis, photocatalysis, cloud seeding and as antimicrobial agents. Here we present a class of silver compounds (Ag₂B₁₀H₁₀ and Ag₂B₁₂H₁₂) that are semiconductors with a bandgap at 2.3 eV in the green visible light spectrum. The silver boranes have extremely high ion conductivity and dynamic-anion facilitated Ag⁺ migration is suggested based on the structural model. The ion conductivity is enhanced more than two orders of magnitude at room temperature (up to 3.2 mS cm⁻¹) by substitution with AgI to form new compounds. Furthermore, the closo-boranes show extremely fast silver nano-filament growth when excited by electrons during transmission electron microscope investigations. Ag nano-filaments can also be reabsorbed back into Ag₂B₁₂H₁₂. These interesting properties demonstrate the multifunctionality of silver closo-boranes and open up avenues in a wide range of fields including photocatalysis, solid state ionics and nano-wire production.

Silver compounds have long been known to possess exceptional solid-state conductivity. Here the authors present silver closo-boranes in which facile Ag⁺ migration occurs, leading to exceptionally high ion conductivities and potential utility in silver nanowire production and photocatalysis due to their semiconductivity.

Investigation of Ag-TiO2 Interfacial Reaction of Highly Stable Ag Nanowire Transparent Conductive Film with Conformal TiO2 Coating by Atomic Layer Deposition

The atomic layer deposition (ALD) technique is applied to coat Ag nanowires (NWs) with a highly uniform and conformal TiO₂ layer to improve the stability and sustainability of Ag NW transparent conductive films (TCFs) at high temperatures. The TiO₂ layer can be directly deposited on Ag NWs with a surface polyvinylpyrrolidone (PVP) coat that acts a bed for TiO₂ seeding in the ALD process. The ALD TiO₂ layer significantly enhances the thermal stability at least 100 fold when aged between 200-400 °C and also provides an extra function of violet-blue light filtration for Ag NW TCFs. Investigation into the interaction between TiO₂ and Ag reveals that the conformal TiO₂ shell could effectively prevent Ag from 1D-to-3D ripening. However, Ag could penetrate the conformal TiO₂ shell and form nanocrystals on the TiO₂ shell surface when it is aged at 400 °C. According to experimental data and thermodynamic evaluation, the Ag penetration leads to an interlayer composed of mixed Ag-Ag₂O-amorphous carbon phases and TiO_2-x at the Ag-TiO₂ interface, which is thought to be caused by extremely high vapor pressure of Ag at the Ag-TiO₂ interface at a higher temperature (e.g., 400 °C).

Understanding the mechanisms leading to failure in metallic nanowire-based transparent heaters, and solution for stability enhancement

Silver nanowire (AgNW) networks are emerging as one of the most promising alternatives to indium tin oxide (ITO) for transparent electrodes in flexible electronic devices. They can be used in a variety of optoelectronic applications such as solar cells, touch panels and organic light-emitting diodes. Recently they have also proven to be very efficient when used as transparent heaters (THs). In addition to the study of AgNW networks acting as THs in regular use, i.e. at low voltage and moderate temperature, their stability and physical behavior at higher voltages and for longer durations should be studied in view of their integration into real devices. The properties of AgNW networks deposited by spray coating on glass or flexible transparent substrates are thoroughly studied via in situ measurements. The AgNW networks' behavior at different voltages for different durations and under different atmospheric conditions, both in air and under vacuum, has been examined. At low voltage, a reversible electrical response is observed while irreversibility and even failure are observed at higher voltages. In order to gain a deeper insight into the behavior of AgNW networks used as THs, simple but realistic physical models are proposed and are found to be in fair agreement with the experimental data. Finally, as the stability of AgNW networks is a key issue, we demonstrate that coating AgNW networks with a very thin layer of TiO₂ using atomic layer deposition (ALD) improves the material's resistance against electrical and thermal instabilities without altering optical transmittance. We show that the critical annealing temperature associated to network breakdown increases from 270 °C for the as-deposited AgNW networks to 420 °C for AgNW networks coated with TiO₂. Similarly, the electrical failure which occurs at 7 V for the as-deposited networks increases to 13 V for TiO₂-coated networks. TiO₂ is also proved to stabilize AgNW networks during long duration operation and at high voltage. Temperature higher than 235 °C was achieved at 7 V without failure.

Spray-assisted alignment of Layer-by-Layer assembled silver nanowires: a general approach for the preparation of highly anisotropic nano-composite films

The present article focuses on the build-up and the properties of oriented silver nanowire monolayer films and Layer-by-Layer assembled multilayer films. We describe the template-free oriented spray-assisted assembly of silver nanowires at solid/air-interfaces using Grazing Incidence Spraying, a simple and versatile approach that allows the formation of highly oriented thin films with a tunable density and in-plane orientation. Depending on the spraying conditions the nematic order parameter, which describes the angular spread of misaligned nanowires, can be as high as 0.98 (a value of 1.00 corresponding to a perfectly parallel alignment). The combination with the Layer-by-Layer assembly allows building multilayer thin films possessing in-plane anisotropy. In order to demonstrate that the local alignment does not cancel out on the macroscopic scale but leads to direction-dependent properties, we use linearly polarized UV-Vis-NIR spectroscopy to probe the selective excitation of the transverse and longitudinal localized plasmon resonances of the nanowires. The polarization efficiency of the thin films increases strongly with the in-plane density, the degree of orientation, and the number of silver nanowire layers. Multilayer films containing 4 layers of nanowires oriented in the same direction reach a polarization efficiency of up to 97% in the near-infrared region.

Large-Scale Spinning of Silver Nanofibers as Flexible and Reliable Conductors

Conducting metal nanowires can be assembled into thin films for flexible electronics and optoelectronics applications including transparent electrodes, nanocircuits, and electronic skin, however, the junction resistances and low aspect ratios still limit its performance. Herein we report high-quality silver nanofibers (AgNFs) synthesized by a gas-assistant solution spinning method. Compared with traditional Ag nanowires that usually have lengths below 100 μm, AgNFs are infinitely long and can be easily assembled into large-scale 2D and 3D flexible conductors with fused junctions between nanofibers. The AgNF networks showed high transparency, low sheet resistance (e. g, 6 Ω sq(-1) at ∼97% transparency), and high flexibility as transparent electrodes, whereas the 3D AgNF sponge could be used as a deformable and robust 3D conductor.