Dual-responsive chondroitin sulfate self-assembling nanoparticles for combination therapy in metastatic cancer cells

In this study, we developed self-assembling nanoparticles (LCPs) able to trigger the release of Chlorambucil (Chl) and Doxorubicin (DOX) to MDA-MB-231 cells by exploiting the enzyme and redox signals. The DOX loaded LCPs was prepared by the self-assembly of two chondroitin sulphate (CS) derivatives, obtained by the covalent conjugation of Lipoic Acid (LA) and Chlorambucil (Chl) to the CS backbone. After the physic-chemical characterization of the conjugates by FT-IR, 1H NMR, and determination of the critical aggregation concentration, spherical nanoparticles with mean hydrodynamic diameter of 45 nm (P.D.I. 0.24) and Z-potential of - 44 mV were obtained by water addition/solvent evaporation method. In vitro experiments for the release of Chl and DOX were performed in healthy and cancer cells, using a cell culture media to maintain the physiological intracellular conditions (pH 7.4) (and concentration of esterase and GSH. The results allowed the selective release of the payloads to be detected: Chl release of 0 and 41% were obtained after 2 h incubation in normal and in cancer cells respectively, while values of 35 (in healthy cells) and 60% (in cancer cells) were recorded for DOX release after 96 h. Finally, viability studies proved the ability of the newly proposed nanosystem to enhance the cytotoxic activity of the two drugs against cancer cells.

Dual drug loaded polypeptide delivery systems for cancer therapy

The present study was aimed to prepare and examine in vitro novel dual-drug loaded delivery systems. Biodegradable nanoparticles based on poly(L-glutamic acid-co-D-phenylalanine) were used as nanocarriers for encapsulation of two drugs from the paclitaxel, irinotecan, and doxorubicin series. The developed delivery systems were characterised with hydrodynamic diameters less than 300 nm (PDI < 0.3). High encapsulation efficiencies (≥75%) were achieved for all single- and dual-drug formulations. The release studies showed faster release at acidic pH, with the release rate decreasing over time. The release patterns of the co-encapsulated forms of substances differed from those of the separately encapsulated drugs, suggesting differences in drug-polymer interactions. The joint action of encapsulated drugs was analysed using the colon cancer cells, both for the dual-drug delivery sytems and a mixture of single-drug formulations. The encapsulated forms of the drug combinations demonstrated comparable efficacy to the free forms, with the encapsulation enhancing solubility of the hydrophobic drug paclitaxel.

Ferulic acid-loaded polymeric nanoparticles prepared from nano-emulsion templates facilitate internalisation across the blood-brain barrier in model membranes

A hydroxycinnamic acid derivative, namely ferulic acid (FA) has been successfully encapsulated in polymeric nanoparticles (NPs) based on poly(lactic-co-glycolic acid) (PLGA). FA-loaded polymeric NPs were prepared from O/W nano-emulsion templates using the phase inversion composition (PIC) low-energy emulsification method. The obtained PLGA NPs exhibited high colloidal stability, good drug-loading capacity, and particle hydrodynamic diameters in the range of 74 to 117 nm, depending on the FA concentration used. In vitro drug release studies confirmed a diffusion-controlled mechanism through which the amount of released FA reached a plateau at 60% after 6 hours-incubation. Five kinetic models were used to fit the FA release data as a function of time. The Weibull distribution and Korsmeyer-Peppas equation models provided the best fit to our experimental data and suggested quasi-Fickian diffusion behaviour. Moderate dose-response antioxidant and radical scavenging activities of FA-loaded PLGA NPs were demonstrated using the DPPH˙ assay achieving inhibition activities close to 60 and 40%, respectively. Cell culture studies confirmed that FA-loaded NPs were not toxic according to the MTT colorimetric assay, were able to internalise efficiently SH-SY5Y neuronal cells and supressed the intracellular ROS-level induced by H₂O₂ leading to 52% and 24.7% of cellular viability at 0.082 and 0.041 mg mL^-1, respectively. The permeability of the NPs through the blood brain barrier was tested with an in vitro organ-on-a-chip model to evaluate the ability of the FA-loaded PLGA and non-loaded PLGA NPs to penetrate to the brain. NPs were able to penetrate the barrier, but permeability decreased when FA was loaded. These results are promising for the use of loaded PLGA NPs for the management of neurological diseases.

Amphiphilic Polypeptides Obtained by Post-Polymerization Modification of Poly-l-Lysine as Systems for Combined Delivery of Paclitaxel and siRNA

The development of effective anti-cancer therapeutics remains one of the current pharmaceutical challenges. The joint delivery of chemotherapeutic agents and biopharmaceuticals is a cutting-edge approach to creating therapeutic agents of enhanced efficacy. In this study, amphiphilic polypeptide delivery systems capable of loading both hydrophobic drug and small interfering RNA (siRNA) were developed. The synthesis of amphiphilic polypeptides included two steps: (i) synthesis of poly-αl-lysine by ring-opening polymerization and (ii) its post-polymerization modification with hydrophobic l-amino acid and l-arginine/l-histidine. The obtained polymers were used for the preparation of single and dual delivery systems of PTX and short double-stranded nucleic acid. The obtained double component systems were quite compact and had a hydrodynamic diameter in the range of 90-200 nm depending on the polypeptide. The release of PTX from the formulations was studied, and the release profiles were approximated using a number of mathematical dissolution models to establish the most probable release mechanism. A determination of the cytotoxicity in normal (HEK 293T) and cancer (HeLa and A549) cells revealed the higher toxicity of the polypeptide particles to cancer cells. The separate evaluation of the biological activity of PTX and anti-GFP siRNA formulations testified the inhibitory efficiency of PTX formulations based on all polypeptides (IC₅₀ 4.5-6.2 ng/mL), while gene silencing was effective only for the Tyr-Arg-containing polypeptide (56-70% GFP knockdown).

Emulsion-induced polymersomes taming tetrodotoxin for prolonged duration local anesthesia

Injectable local anesthetics that can provide a continuous nerve block approximating the duration of a pain state would be a life-changing solution for patients experiencing post-operative pain or chronic pain. Tetrodotoxin (TTX) is a site 1 sodium channel blocker that is extremely potent compared to clinically used local anesthetics. Challengingly, TTX doses are limited by its associated systemic toxicity, thus shortening the achievable duration of nerve blocks. Here, we explore emulsion-induced polymersomes (EIP) as a drug delivery system to safely use TTX for local anesthesia. By emulsifying hyperbranched polyglycerol-poly (propylene glycol)-hyperbranched polyglycerol (HPG-PPG-HPG) in TTX aqueous solution, HPG-PPG-HPG self-assembled into micrometer-sized polymersomes within seconds. The formed polymersomes have microscopically visible internal aqueous pockets that encapsulate TTX with an encapsulation efficiency of up to 94%. Moreover, the polymersomes are structurally stable, enabling sustained TTX release. In vivo, the freshly prepared EIP/TTX formulation can be directly injected and increased the tolerated dose of TTX in Sprague-Dawley rats to 11.5 μg without causing any TTX-related systemic toxicity. In the presence of the chemical penetration enhancer (CPE) sodium octyl sulfate (SOS), a single perineural injection of EIP/TTX/SOS formulation produced a reliable sciatic nerve block for 22 days with minimal local toxicity.

Modeling Polyzwitterion-Based Drug Delivery Platforms: A Perspective of the Current State-of-the-Art and Beyond

Drug delivery platforms are anticipated to have biocompatible and bioinert surfaces. PEGylation of drug carriers is the most approved method since it improves water solubility and colloid stability and decreases the drug vehicles’ interactions with blood components. Although this approach extends their biocompatibility, biorecognition mechanisms prevent them from biodistribution and thus efficient drug transfer. Recent studies have shown (poly)zwitterions to be alternatives for PEG with superior biocompatibility. (Poly)zwitterions are super hydrophilic, mainly stimuli-responsive, easy to functionalize and they display an extremely low protein adsorption and long biodistribution time. These unique characteristics make them already promising candidates as drug delivery carriers. Furthermore, since they have highly dense charged groups with opposite signs, (poly)zwitterions are intensely hydrated under physiological conditions. This exceptional hydration potential makes them ideal for the design of therapeutic vehicles with antifouling capability, i.e., preventing undesired sorption of biologics from the human body in the drug delivery vehicle. Therefore, (poly)zwitterionic materials have been broadly applied in stimuli-responsive “intelligent” drug delivery systems as well as tumor-targeting carriers because of their excellent biocompatibility, low cytotoxicity, insignificant immunogenicity, high stability, and long circulation time. To tailor (poly)zwitterionic drug vehicles, an interpretation of the structural and stimuli-responsive behavior of this type of polymer is essential. To this end, a direct study of molecular-level interactions, orientations, configurations, and physicochemical properties of (poly)zwitterions is required, which can be achieved via molecular modeling, which has become an influential tool for discovering new materials and understanding diverse material phenomena. As the essential bridge between science and engineering, molecular simulations enable the fundamental understanding of the encapsulation and release behavior of intelligent drug-loaded (poly)zwitterion nanoparticles and can help us to systematically design their next generations. When combined with experiments, modeling can make quantitative predictions. This perspective article aims to illustrate key recent developments in (poly)zwitterion-based drug delivery systems. We summarize how to use predictive multiscale molecular modeling techniques to successfully boost the development of intelligent multifunctional (poly)zwitterions-based systems.

Application of polymersomes in membrane protein study and drug discovery: Progress, strategies, and perspectives

Membrane proteins (MPs) play key roles in cellular signaling pathways and are responsible for intercellular and intracellular interactions. Dysfunctional MPs are directly related to the pathogenesis of various diseases, and they have been exploited as one of the most sought-after targets in the pharmaceutical industry. However, working with MPs is difficult given that their amphiphilic nature requires protection from biological membrane or membrane mimetics. Polymersomes are bilayered nano-vesicles made of self-assembled block copolymers that have been widely used as cell membrane mimetics for MP reconstitution and in engineering of artificial cells. This review highlights the prevailing trend in the application of polymersomes in MP study and drug discovery. We begin with a review on the techniques for synthesis and characterization of polymersomes as well as methods of MP insertion to form proteopolymersomes. Next, we review the structural and functional analysis of the different types of MPs reconstituted in polymersomes, including membrane transport proteins, MP complexes, and membrane receptors. We then summarize the factors affecting reconstitution efficiency and the quality of reconstituted MPs for structural and functional studies. Additionally, we discuss the potential in using proteopolymersomes as platforms for high-throughput screening (HTS) in drug discovery to identify modulators of MPs. We conclude by providing future perspectives and recommendations on advancing the study of MPs and drug development using proteopolymersomes.

Self-Assembled Nanoparticles Based on Block-Copolymers of Poly(2-Deoxy-2-methacrylamido-d-glucose)/Poly(N-Vinyl Succinamic Acid) with Poly(O-Cholesteryl Methacrylate) for Delivery of Hydrophobic Drugs

The self-assembly of amphiphilic block-copolymers is a convenient way to obtain soft nanomaterials of different morphology and scale. In turn, the use of a biomimetic approach makes it possible to synthesize polymers with fragments similar to natural macromolecules but more resistant to biodegradation. In this study, we synthesized the novel bio-inspired amphiphilic block-copolymers consisting of poly(N-methacrylamido-d-glucose) or poly(N-vinyl succinamic acid) as a hydrophilic fragment and poly(O-cholesteryl methacrylate) as a hydrophobic fragment. Block-copolymers were synthesized by radical addition-fragmentation chain-transfer (RAFT) polymerization using dithiobenzoate or trithiocarbonate chain-transfer agent depending on the first monomer, further forming the hydrophilic block. Both homopolymers and copolymers were characterized by ¹H NMR and Fourier transform infrared spectroscopy, as well as thermogravimetric analysis. The obtained copolymers had low dispersity (1.05-1.37) and molecular weights in the range of ~13,000-32,000. The amphiphilic copolymers demonstrated enhanced thermal stability in comparison with hydrophilic precursors. According to dynamic light scattering and nanoparticle tracking analysis, the obtained amphiphilic copolymers were able to self-assemble in aqueous media into nanoparticles with a hydrodynamic diameter of approximately 200 nm. An investigation of nanoparticles by transmission electron microscopy revealed their spherical shape. The obtained nanoparticles did not demonstrate cytotoxicity against human embryonic kidney (HEK293) and bronchial epithelial (BEAS-2B) cells, and they were characterized by a low uptake by macrophages in vitro. Paclitaxel loaded into the developed polymer nanoparticles retained biological activity against lung adenocarcinoma epithelial cells (A549).

Near-Infrared Heptamethine Cyanine Dyes for Nanoparticle-Based Photoacoustic Imaging and Photothermal Therapy

We have synthesized and characterized a library of near-infrared (NIR) heptamethine cyanine dyes for biomedical application as photoacoustic imaging and photothermal agents. These hydrophobic dyes were incorporated into a polymer-based nanoparticle system to provide aqueous solubility and protection of the photophysical properties of each dye scaffold. Among those heptamethine cyanine dyes analyzed, 13 compounds within the nontoxic polymeric nanoparticles have been selected to exemplify structural relationships in terms of photostability, photoacoustic imaging, and photothermal behavior within the NIR (∼650-850 nm) spectral region. The most contributing structural features observed in our dye design include hydrophobicity, rotatable bonds, heavy atom effects, and stability of the central cyclohexene ring within the dye core. The NIR agents developed within this project serve to elicit a structure-function relationship with emphasis on their photoacoustic and photothermal characteristics aiming at producing customizable NIR photoacoustic and photothermal tools for clinical use.

Ionic Liquid-Controlled Shape Transformation of Spherical to Nonspherical Polymersomes via Hierarchical Self-Assembly of a Diblock Copolymer

Here, we report the self-assembly of poly(ethylene glycol) methyl ether-block-poly(ε-caprolactone) (PEG-b-PCL) copolymer in three ionic liquids (ILs) possessing different cations with common bis(trifluoromethylsulfonyl)imide anion. The observed polymeric nanostructures in ILs were directly visualized by room temperature conventional transmission and field emission scanning electron microscopy and were further examined for their size and shape by dynamic light scattering technique. The results show that through changes in the concentration of PEG-b-PCL and/or changing the solvent by using a different IL, we can effectively induce shape transformation of self-assembled PEG-b-PCL nanostructures in order to generate nonspherical polymersomes, such as worm-like aggregates, stomatocytes, nanotubes, large hexagonal and tubular-shaped polymersomes. These findings provide a promising platform for the design of biodegradable soft dynamic systems in the micro-/nano-motor field for cancer-targeted delivery, diagnosis and imaging-guided therapy, and controlled release of therapeutic drugs for treatment of many diseases. Non-spherical polymersome-based vaccines may be taken up more efficiently, especially against viruses for pulmonary drug delivery than the spherical polymersomes-based.

Synthesis of polymer nanoparticles via electrohydrodynamic emulsification-mediated self-assembly

HYPOTHESIS

Electrospray can rapidly produce fine, organic solvent-in-water emulsions in the absence of surfactant via electrohydrodynamic emulsification (EE), a reverse configuration of traditional electrospray. This paper investigates whether EE can produce high-quality nanocomposites comprised of block co-polymers and organic nanoparticles (NPs) via the interfacial instability (IS) self-assembly method. Surfactant-free approaches may increase encapsulation efficiency and product uniformity, process speed, and ease of downstream product purification.

EXPERIMENTS

All particles were produced using EE-mediated self-assembly (SA) (EE-SA). Particles were produced using poly(lactic-co-glycolic acid) (PLGA) polymers as proof of concept. Then, block copolymer (BCP) micelles were synthesized from polystyrene-block-poly(ethylene oxide) (PS-b-PEO) (PS 9.5 kDa:PEO 18.0 kDa) in the presence and absence of superparamagnetic iron oxide nanoparticles (SPIONs) or quantum dots (QDs). Encapsulant concentration was varied, and the effect of encapsulant NP ligands on final particle size was investigated.

FINDINGS

EE-SA generated both pure polymer NPs and nanocomposites containing SPIONs and QDs. PLGA particles spanned from sub- to super-micron sizes. PS-b-PEO NPs and nanocomposites were highly monodisperse, and more highly loaded than those made via a conventional, surfactant-rich IS process. Free ligands decreased the size of pure BCP particles. Increasing encapsulant levels led to a morphological transition from spherical to worm-like to densely loaded structures.

A robust optimization approach for the breast cancer targeted design of PEtOx-b-PLA polymersomes

The equipping of nanoparticles with the peptide moiety recognizing a particular receptor, enables cell or tissue-specific targeting, therefore the optimization of the targeted nanoparticles is a key factor in the formulation design process. In this paper, we report the optimization concept of Doxorubicin encapsulating PEtOx-b-PLA polymersome formulation equipped with Peptide18, which is a breast cancer recognizing tumor homing peptide, and the unveiling of the cell-specific delivery potential. The most dominant formulation parameters, which are the polymer to Doxorubicin mass ratio (w/w) and the aqueous to organic phase ratio (v/v), were optimized using Central Composite Design (CCD) based Response Surface Methodology. The characteristics of optimum polymersome formulation were determined as the hydrodynamic diameter of 146.35 nm, the PDI value of 0.136, and the encapsulation efficiency of 57.11% and TEM imaging, which are in agreement with the DLS data, showed the spherical morphology of the polymersomes. In order to demonstrate the breast cancer-specific delivery of targeted polymersomes, the flow cytometry and confocal microscopy analyses were carried out. The targeted polymersomes were accumulated 8 times higher in AU565 cells compared to MCF10A cells and the intracellular Doxorubicin was almost 10 times higher in AU565 cells. The CCD-mediated optimized targeted polymersomes proposed in this report holds the promise of targeted therapy for breast cancer and can be potentially used for the development of novel treatments.

Growth of Giant Peptide Vesicles Driven by Compartmentalized Transcription-Translation Activity

Compartmentalization and spatial organization of biochemical reactions are essential for the establishment of complex metabolic pathways inside synthetic cells. Phospholipid and fatty acid membranes are the most natural candidates for this purpose, but also polymers have shown great potential as enclosures of artificial cell mimics. Herein, we report on the formation of giant vesicles in a size range of 1 μm-100 μm using amphiphilic elastin-like polypeptides. The peptide vesicles can accommodate cell-free gene expression reactions, which is demonstrated by the transcription of a fluorescent RNA aptamer and the production of a fluorescent protein. Importantly, gene expression inside the vesicles leads to a strong growth of their size-up to an order of magnitude in volume in several cases-which is driven by changes in osmotic pressure, resulting in fusion events and uptake of membrane peptides from the environment.

Voriconazole Ternary Micellar Systems for the Treatment of Ocular Mycosis: Statistical Optimization and In Vivo Evaluation

Voriconazole (VRC) is a broad spectrum, second generation triazole antifungal. The main use of VRC is via the oral and intravenous route. The study aimed to formulate VRC into ternary micellar systems (TMSs) for the topical treatment of ocular mycosis. TMSs were successfully prepared by water addition/solvent evaporation method, applying a 3-factor D-optimal design. The numerical optimization process suggested an optimal formula (OTMS) composed of total Pluronics to drug weight ratio of 22.89: 1, 1:1 weight ratio of Pluronic® P123 and F68, and 2% w/v of Labrasol. OTMS had high solubilization efficiency of 98.0%, small micellar size of 21.8 nm and suitable zeta potential and polydispersity index values of -9.0 mV and 0.261, respectively. OTMS exhibited acceptable stability for 3 months. Transmission electron microscopy demonstrated the spherical morphology of micelles. OTMS was expected to cause no ocular irritation or blurring in vision as reflected by pH and refractive index measurements. The histopathological study revealed the safety of OTMS for ocular use. The fungal susceptibility testing using Candida albicans demonstrated the superiority of OTMS to VRC suspension, with greater and more durable growth inhibition. Therefore, ocular application of optimized VRC-loaded TMSs can be a promising treatment for ocular mycosis.

Polypeptide Self-Assembled Nanoparticles as Delivery Systems for Polymyxins B and E

Polymyxins are peptide antibiotics that are highly efficient against many multidrug resistant pathogens. However, the poor stability of polymyxins in the bloodstream requires the administration of high drug doses that, in turn, can lead to polymyxin toxicity. Consequently, different delivery systems have been considered for polymyxins to overcome these obstacles. In this work, we report the development of polymyxin delivery systems based on nanoparticles obtained from the self-assembly of amphiphilic random poly(l-glutamic acid-co-d-phenylalanine). These P(Glu-co-dPhe) nanoparticles were characterized in terms of their size, surface charge, stability, cytotoxicity, and uptake by macrophages. The encapsulation efficiency and drug loading into P(Glu-co-dPhe) nanoparticles were determined for both polymyxin B and E. The release kinetics of polymyxins B and E from nanoformulations was studied and compared in buffer solution and human blood plasma. The release mechanisms were analyzed using a number of mathematical models. The minimal inhibitory concentrations of the nanoformulations were established and compared with those determined for the free antibiotics.

Modulating the Selectivity and Stealth Properties of Ellipsoidal Polymersomes through a Multivalent Peptide Ligand Display

There is a need for improved nanomaterials to simultaneously target cancer cells and avoid non-specific clearance by phagocytes. An ellipsoidal polymersome system is developed with a unique tunable size and shape property. These particles are functionalized with in-house phage-display cell-targeting peptide to target a medulloblastoma cell line in vitro. Particle association with medulloblastoma cells is modulated by tuning the peptide ligand density on the particles. These polymersomes has low levels of association with primary human blood phagocytes. The stealth properties of the polymersomes are further improved by including the peptide targeting moiety, an effect that is likely driven by the peptide protecting the particles from binding blood plasma proteins. Overall, this ellipsoidal polymersome system provides a promising platform to explore tumor cell targeting in vivo.

Thermoresponsive Polysaccharide Graft Polymer Vesicles with Tunable Size and Structural Memory

Controlling polymer vesicle size is difficult and a major obstacle for their potential use in biomedical applications, such as drug-delivery carriers and nanoreactors. Herein, we report size-tunable polymer vesicles based on self-assembly of a thermoresponsive amphiphilic graft copolymer. Unilamellar polymer vesicles form upon heating chilled polymer solutions, and vesicle size can be tuned in the range of 40-70 nm by adjusting the initial polymer concentration. Notably, the polymer can reversibly switch between a monomer state and a vesicle state in accordance with a cooling/heating cycle, which changes neither the size nor the size distribution of the vesicles. This lack of change suggests that the polymer memorizes a particular vesicle conformation. Given our vesicles' size tunability and structural memory, our research considerably expands the fundamental and practical scope of thermoresponsive amphiphilic graft copolymers and renders amphiphilic graft copolymers useful tools for synthesizing functional self-assembled materials.

Faceted polymersomes: a sphere-to-polyhedron shape transformation

The creation of "soft" deformable hollow polymeric nanoparticles with complex non-spherical shapes via block copolymer self-assembly remains a challenge. In this work, we show that a perylene-bearing block copolymer can self-assemble into polymeric membrane sacs (polymersomes) that not only possess uncommonly faceted polyhedral shapes but are also intrinsically fluorescent. Here, we further reveal for the first time an experimental visualization of the entire polymersome faceting process. We uncover how our polymersomes facet through a sphere-to-polyhedron shape transformation pathway that is driven by perylene aggregation confined within a topologically spherical polymersome shell. Finally, we illustrate the importance in understanding this shape transformation process by demonstrating our ability to controllably isolate different intermediate polymersome morphologies. The findings presented herein should provide opportunities for those who utilize non-spherical polymersomes for drug delivery, nanoreactor or templating applications, and those who are interested in the fundamental aspects of polymersome self-assembly.

Novel Formulations of C-Peptide with Long-Acting Therapeutic Potential for Treatment of Diabetic Complications

The development and application of novel nanospheres based on cationic and anionic random amphiphilic polypeptides with prolonged stability were proposed. The random copolymers, e.g., poly(l-lysine-co-d-phenylalanine) (P(Lys-co-dPhe)) and poly(l-glutamic acid-co-d-phenylalanine) (P(Glu-co-dPhe)), with different amount of hydrophilic and hydrophobic monomers were synthesized. The polypeptides obtained were able to self-assemble into nanospheres. Such characteristics as size, PDI and ζ-potential of the nanospheres were determined, as well as their dependence on pH was also studied. Additionally, the investigation of their biodegradability and cytotoxicity was performed. The prolonged stability of nanospheres was achieved via introduction of d-amino acids into the polypeptide structure. The cytotoxicity of nanospheres obtained was tested using HEK-293 cells. It was proved that no cytotoxicity up to the concentration of 500 µg/mL was observed. C-peptide delivery systems were realized in two ways: (1) peptide immobilization on the surface of P(Glu-co-dPhe) nanospheres; and (2) peptide encapsulation into P(Lys-co-dPhe) systems. The immobilization capacity and the dependence of C-peptide encapsulation efficiency, as well as maximal loading capacity, on initial drug concentration was studied. The kinetic of drug release was studied at model physiological conditions. Novel formulations of a long-acting C-peptide exhibited their effect ex vivo by increasing activity of erythrocyte Na⁺/K⁺-adenosine triphosphatase.

Star-Graft Quarterpolymer-Based Polymersomes as Nanocarriers for Co-Delivery of Hydrophilic/Hydrophobic Chemotherapeutic Agents

We report the fabrication of polymersomes, using as building blocks star-graft quarterpolymers, composed of hydrophobic polystyrene and pH-sensitive poly(2-vinylpyridine)-b-poly(acrylic acid) (P2VP-b-PAA) arms, emanated from a common nodule, enriched by thermosensitive poly(N-isopropylacrylamide) grafts covalently bonded on the PAA block-arms. These multicompartmental polymersomes were evaluated as nanocarriers for the encapsulation and controlled co-delivery of doxorubicin (hydrophilic) and paclitaxel (hydrophobic) chemotherapeutic agents. The polymersomes can load these drugs in different compartments and can efficiently be internalized in the human lung adenocarcinoma epithelial cells, delivering their cargo and inducing high cell apoptosis. The release kinetics of both anticancer agents was controlled differently by the environmental conditions (pH and temperature). Enhanced release was observed at the acidic pH 6.0 and under physiological temperature (37 °C). At the same total drug level, co-delivery of these drugs with the polymersomes caused enhanced cytotoxicity and induced significantly higher cell apoptosis in the cancer cell line compared to the polymersomes loaded with either of the two drugs.

Facile synthesis of pH-responsive polymersomes based on lipidized PEG for intracellular co-delivery of curcumin and methotrexate

pH-responsive polymersomes were obtained by self-assembling of a carboxyl-terminated PEG amphiphile achieved via esterification of PEG diacid with PEG40stearate. The obtained vesicular systems had spherical shape and a mean diameter of 70 nm. The pH sensitivity was assessed by measuring the variations of particles mean diameter after incubation in media mimicking the physiological (pH 7.4) or tumor (pH 5.0) conditions, recording a significant increase of the vesicles dimensions at acidic pH. The ability of the polymersomes to carry both hydrophobic and hydrophilic drugs was evaluated by loading the vesicles with curcumin and methotrexate, respectively, obtaining high encapsulation efficiencies and pH-dependent release profiles. The drug-loaded polymeric vesicles exhibited improved cytotoxic potential against MCF-7 cancer cell line and were found to be highly hemocompatible. Finally, cellular uptake experiments on MCF-7 cancer cells were conducted to demonstrate the ability of the designed polymersomes to enhance drug penetration inside the cells.

Amphiphilic polypeptides with prolonged enzymatic stability for the preparation of self-assembled nanobiomaterials

Aib residue distribution in Lys/Aib polymers influences the morphology of forming nanoparticles and the rate of their enzymatic degradation.

Formation of non-spherical polymersomes driven by hydrophobic directional aromatic perylene interactions

Polymersomes, made up of amphiphilic block copolymers, are emerging as a powerful tool in drug delivery and synthetic biology due to their high stability, chemical versatility, and surface modifiability. The full potential of polymersomes, however, has been hindered by a lack of versatile methods for shape control. Here we show that a range of non-spherical polymersome morphologies with anisotropic membranes can be obtained by exploiting hydrophobic directional aromatic interactions between perylene polymer units within the membrane structure. By controlling the extent of solvation/desolvation of the aromatic side chains through changes in solvent quality, we demonstrate facile access to polymersomes that are either ellipsoidal or tubular-shaped. Our results indicate that perylene aromatic interactions have a great potential in the design of non-spherical polymersomes and other structurally complex self-assembled polymer structures.

Self-assembled polypeptide nanoparticles for intracellular irinotecan delivery

In this research poly(l-lysine)-b-poly(l-leucine) (PLys-b-PLeu) polymersomes were developed. It was shown that the size of nanoparticles depended on pH of self-assembly process and varied from 180 to 650nm. The biodegradation of PLys-b-PLeu nanoparticles was evaluated using in vitro polypeptide hydrolysis in two model enzymatic systems, as well as in human blood plasma. The experiments on the visualization of cellular uptake of rhodamine 6g-loaded and fluorescein-labeled nanoparticles were carried out and the possibility of their penetration into the cells was approved. The cytotoxicity of polymersomes obtained was tested using three cell lines, namely, HEK, NIH-3T3 and A549. It was shown that tested nanoparticles did not demonstrate any cytotoxicity in the concentrations up to 2mg/mL. The encapsulation of specific to colorectal cancer anti-tumor drug irinotecan into developed nanocontainers was performed by means of pH gradient method. The dispersion of drug-loaded polymersomes in PBS was stable at 4°C for a long time (at least 1month) without considerable drug leakage. The kinetics of drug release was thoroughly studied using two model enzymatic systems, human blood serum and PBS solution. The approximation of irinotecan release profiles with different mathematical drug release models was carried out and allowed identification of the release mechanism, as well as the morphological peculiarities of developed particles. The dependence of encapsulation efficiency, as well as maximal loading capacity, on initial drug concentration was studied. The maximal drug loading was found as 320±55μg/mg of polymersomes. In vitro anti-tumoral activity of irinotecan-loaded polymersomes on a colon cancer cell line (Caco-2) was measured and compared to that for free drug.

Chemical and mechanical modulation of polymeric micelle assembly

Recently, polymeric micelles self-assembled from amphiphilic polymers have been studied for various industrial and biomedical applications. This nanoparticle self-assembly typically occurs in a solvent-exchange process. In this process, the quality of the resulting particles is uncontrollably mediated by polymeric solubility and mixing conditions. Here, we hypothesized that improving the solubility of an amphiphilic polymer in an organic solvent via chemical modification while controlling the mixing rate of organic and aqueous phases would enhance control over particle morphology and size. We examined this hypothesis by synthesizing a poly(2-hydroxyethyl)aspartamide (PHEA) grafted with controlled numbers of octadecyl (C₁₈) chains and oligovaline groups (termed "oligovaline-PHEA-C₁₈"). The mixing rate of DMF and water was controlled either by microfluidic mixing of laminar DMF and water flows or through turbulent bulk mixing. Interestingly, oligovaline-PHEA-C₁₈ exhibited an increased solubility in DMF compared with PHEA-C₁₈, as demonstrated by an increase of mixing energy. In addition, increasing the mixing rate between water and DMF using the microfluidic mixer resulted in a decrease of the diameter of the resulting polymeric micelles, as compared with the particles formed from a bulk mixing process. Overall, these findings will expand the parameter space available to control particle self-assembly while also serving to improve existing nanoparticle processing techniques.

Drug resistance reversal by combretastatin-A4 phosphate loaded with doxorubicin in polymersomes independent of angiogenesis effect

OBJECTIVES

This study aimed to evaluate that the polymersomes (Ps-DOX-CA4P) dual-loaded with combretastatin-A4 phosphate (CA4P) and doxorubicin (DOX) overcame drug resistance and sensitized tumour cells to chemotherapeutic drugs.

METHODS

Ps-DOX-CA4P were prepared by solvent evaporation method using mPEG-b-PLA as carriers. The potential capability of CA4P to reverse DOX resistance was verified by cytotoxicity test, apoptosis assay and cellular uptake of DOX. The comparison between free drugs and drug-loaded polymersomes was also made on a single-layer cell model and multicellular tumour spheroids to display the superiority of the drug vehicles. Furthermore, we put the emphasis on the investigation into underlying mechanisms for CA4P overcoming DOX resistance.

KEY FINDINGS

Results showed Ps-DOX-CA4P achieved increased uptake of DOX, enhanced cytotoxicity and apoptotic rate in MCF-7/ADR cells as well as MCF-7/ADR tumour spheroids. The potential molecular mechanisms may be related to inhibiting P-glycoprotein function by downregulating protein kinase Cα, stimulating ATPase activity, depleting ATP and increasing intracellular reactive oxygen species levels.

CONCLUSIONS

The findings validated the sensitization property of CA4P on DOX independent of its well-known angiogenesis effect, which would provide a novel and promising strategy for drug-resistant cancer therapy.

Simulation of self-assembly of polyzwitterions into vesicles

Using the Langevin dynamics method and a coarse-grained model, we have studied the formation of vesicles by hydrophobic polymers consisting of periodically placed zwitterion side groups in dilute salt-free aqueous solutions. The zwitterions, being permanent charge dipoles, provide long-range electrostatic correlations which are interfered by the conformational entropy of the polymer. Our simulations are geared towards gaining conceptual understanding in these correlated dipolar systems, where theoretical calculations are at present formidable. A competition between hydrophobic interactions and dipole-dipole interactions leads to a series of self-assembled structures. As the spacing d between the successive zwitterion side groups decreases, single chains undergo globule → disk → worm-like structures. We have calculated the Flory-Huggins χ parameter for these systems in terms of d and monitored the radius of gyration, hydrodynamic radius, spatial correlations among hydrophobic and dipole monomers, and dipole-dipole orientational correlation functions. During the subsequent stages of self-assembly, these structures lead to larger globules and vesicles as d is decreased up to a threshold value, below which no large scale morphology forms. The vesicles form via a polynucleation mechanism whereby disk-like structures form first, followed by their subsequent merger.

Fluorescent microspheres for one-photon and two-photon imaging of mesenchymal stem cells

Preparation of fluorescent beads to quantitatively evaluate the one-photon and two-photon imaging of hMSCs that have endocytosed AO-PLGA nanospheres.

Prostate-Specific Membrane Antigen Targeted Polymersomes for Delivering Mocetinostat and Docetaxel to Prostate Cancer Cell Spheroids

Prostate cancer cells overexpress the prostate-specific membrane antigen (PSMA) receptors on the surface. Targeting the PSMA receptor creates a unique opportunity for drug delivery. Docetaxel is a Food and Drug Administration-approved drug for treating metastatic and androgen-independent prostate cancer, and mocetinostat is a potent inhibitor of class I histone deacetylases. In this study, we prepared reduction-sensitive polymersomes presenting folic acid on the surface and encapsulating either docetaxel or mocetinostat. The presence of folic acid allowed efficient targeting of the PSMA receptor and subsequent internalization of the polymeric vesicles in cultured LNCaP prostate cancer cell spheroids. The intracellular reducing agents efficiently released docetaxel and mocetinostat from the polymersomes. The combination of the two drug-encapsulated polymersome formulations significantly (p < 0.05) decreased the viability of the LNCaP cells (compared to free drugs or control) in three-dimensional spheroid cultures. The calculated combination index value indicated a synergistic effect for the combination of mocetinostat and docetaxel. Thus, our PSMA-targeted drug-encapsulated polymersomes has the potential to lead to a new direction in prostate cancer therapy that decreases the toxicity and increases the efficacy of the drug delivery systems.

Biopores/membrane proteins in synthetic polymer membranes

BACKGROUND

Mimicking cell membranes by simple models based on the reconstitution of membrane proteins in lipid bilayers represents a straightforward approach to understand biological function of these proteins. This biomimetic strategy has been extended to synthetic membranes that have advantages in terms of chemical and mechanical stability, thus providing more robust hybrid membranes.

SCOPE OF THE REVIEW

We present here how membrane proteins and biopores have been inserted both in the membrane of nanosized and microsized compartments, and in planar membranes under various conditions. Such bio-hybrid membranes have new properties (as for example, permeability to ions/molecules), and functionality depending on the specificity of the inserted biomolecules. Interestingly, membrane proteins can be functionally inserted in synthetic membranes provided these have appropriate properties to overcome the high hydrophobic mismatch between the size of the biomolecule and the membrane thickness.

MAJOR CONCLUSION

Functional insertion of membrane proteins and biopores in synthetic membranes of compartments or in planar membranes is possible by an appropriate selection of the amphiphilic copolymers, and conditions of the self-assembly process. These hybrid membranes have new properties and functionality based on the specificity of the biomolecules and the nature of the synthetic membranes.

GENERAL SIGNIFICANCE

Bio-hybrid membranes represent new solutions for the development of nanoreactors, artificial organelles or active surfaces/membranes that, by further gaining in complexity and functionality, will promote translational applications. This article is part of a Special Issue entitled: Lipid order/lipid defects and lipid-control of protein activity edited by Dirk Schneider.

Mitochondria-targeted fluorescent polymersomes for drug delivery to cancer cells

Mitochondria is an attractive target to deliver anticancer drugs. We have synthesized a cationic triphenylphosphonium ion conjugated fluorescent polymer which self-assembles into nanosized polymersomes and targets the encapsulated anticancer drug doxorubicin to cancer cell mitochondria.

Nano-capsules of amphiphilic poly(ethylene glycol)-block-poly(bisphenol A carbonate) copolymers via thermodynamic entrapment

Fast and simple preparation of nano-capsules by water addition to poly(ethylene glycol)-block-poly(bisphenol A carbonate) copolymers in THF.

One-pot RAFT and fast polymersomes assembly: a ‘beeline’ from monomers to drug-loaded nanovectors

A ‘fast RAFT’ strategy that allows the engineering of drug-containing polymer vesicles in only a few hours, starting from functional monomers.

Hydrophobically Modified Keratin Vesicles for GSH-Responsive Intracellular Drug Release

Redox-responsive polymersomes were prepared by self-assembly of a hydrophobically modified keratin and employing a water addition/solvent evaporation method. Polyethylene glycol-40 stearate (PEG40ST) was chosen as hydrophobic block to be coupled to keratin via radical grafting. The amphiphilic polymer exhibited low critical aggregation concentration (CAC; 10 μg/mL), indicating a good thermodynamic stability. The polymeric vesicles loaded both hydrophilic methotrexate and hydrophobic curcumin with high entrapment efficiencies, and showed a GSH-dependent drug release rate. Confocal studies on HeLa cells revealed that the obtained polymersomes were efficiently internalized. Biocompatibility properties of the proposed delivery vehicle were assessed in HET-CAM test and Balb-3T3 mouse fibroblasts. Polymersomes loaded with either methotrexate or curcumin inhibited HeLa and CHO-K1 cancer cells proliferation. Overall, the proposed keratin polymersomes could be efficient nanocarriers for chemotherapeutic agents.

Bio-inspired synthetic nanovesicles for glucose-responsive release of insulin

A new glucose-responsive formulation for self-regulated insulin delivery was constructed by packing insulin, glucose-specific enzymes into pH-sensitive polymersome-based nanovesicles assembled by a diblock copolymer. Glucose can passively transport across the bilayer membrane of the nanovesicle and be oxidized into gluconic acid by glucose oxidase, thereby causing a decrease in local pH. The acidic microenvironment causes the hydrolysis of the pH sensitive nanovesicle that in turn triggers the release of insulin in a glucose responsive fashion. In vitro studies validated that the release of insulin from nanovesicle was effectively correlated with the external glucose concentration. In vivo experiments, in which diabetic mice were subcutaneously administered with the nanovesicles, demonstrate that a single injection of the developed nanovesicle facilitated stabilization of the blood glucose levels in the normoglycemic state (<200 mg/dL) for up to 5 days.

Peptide amphiphile nanoparticles enhance the immune response against a CpG-adjuvanted influenza antigen

Cationic peptide amphiphile nanoparticles are employed for co-delivery of immune modulator CpG and antigen. This results in better targeting to the antigen presenting cells and eliciting strong Th1 response, which is effective against the intracellular pathogens.