A theoretical and electrochemical impedance spectroscopy study of the adsorption and sensing of selected metal ions by 4-morpholino-7-nitrobenzofuran

The selectivity of a novel chemosensor, based on a modified nitrobenzofurazan referred to as NBD-Morph, has been investigated for the detection of heavy metal cations (Co2+, Pb2+, Mg2+, Ag+, Cu2+, Hg2+, Ni2+, and Zn2+). The ligand, 4-morpholino-7-nitrobenzofurazan (NBD-Morph), was characterized using spectroscopic techniques including FT-IR and 1H NMR. Vibrational frequencies obtained from FT-IR and proton NMR (1H) chemical shifts were accurately predicted employing the density functional theory (DFT) at the B3LYP level of theory. Furthermore, an examination of the structural, electronic, and quantum chemical properties was conducted and discussed. DFT calculations were employed to explore the complex formation ability of the NBD-Morph ligand with Co2+, Pb2+, Mg2+, Ag+, Cu2+, Hg2+, Ni2+, and Zn2+ metal cations. The comparison of adsorption energies for all possible conformations reveals that NBD-Morph exhibits sensitivity and selectivity towards metal ions, including Pb2+, Cu2+, Ag+, and Ni2+. However, an assessment of their reactivity using QTAIM topological parameters demonstrated the ligand's greater complexation ability toward Cu2+ or Ni2+ than those formed by Pb2+ or Ag+. Additionally, molecular electrostatic potential (MEP), Hirshfeld surfaces, and their associated 2D-fingerprint plots were applied to a detailed study of the inter-molecular interactions in NBD-Morph-X (X = Pb2+, Cu2+, Ag+, Ni2+) complexes. The electron localization function (ELF) and the localized-orbital locator (LOL) were generated to investigate the charge transfer and donor-acceptor interactions within the complexes. Electrochemical analysis further corroborates the theoretical findings, supporting the prediction of NBD-Morph's sensory ability towards Ni2+ metal cations. In conclusion, NBD-Morph stands out as a promising sensor for Ni2+.

A turn-on signal biosensor for cadmium(II) based on DNAzyme and stem-loop qPCR

Cadmium is a heavy metal that is exceedingly hazardous to humans and can enter the body through tainted food or drink, causing severe harm. It is critical to develop a technology for detecting cadmium in food and water that is sensitive and accurate. One such approach, which employs nucleases, is uncommon. A cadmium(II) turn-on biosensor was successfully created in this work using repetitive cleavage of certain specific nucleases for signal conversion and sophisticated stem-loop qPCR (quantitative polymerase chain reaction) for quick signal amplification and output. The method has strong selectivity and sensitivity for precise quantification, with a detection limit of 6 nmol L-1, i.e. 0.948 g L-1, which is far lower than the 5.0 g L-1 set by the United States Environmental Protection Agency, and it also operates well in retail rice samples.

Gold Nanoparticles as Exquisite Colorimetric Transducers for Water Pollutant Detection

Gold nanoparticles (AuNPs) are useful nanomaterials as transducers for colorimetric sensors because of their high extinction coefficient and ability to change color depending on aggregation status. Therefore, over the past few decades, AuNP-based colorimetric sensors have been widely applied in several environmental and biological applications, including the detection of water pollutants. According to various studies, water pollutants are classified into heavy metals or cationic metal ions, toxins, and pesticides. Notably, many researchers have been interested in AuNP that detect water pollutants with high sensitivity and selectivity, while offering no adverse environmental issues in terms of AuNP use. This review provides a representative overview of AuNP-based colorimetric sensors for detecting several water pollutants. In particular, we emphasize the advantages of AuNP as colorimetric transducers for water pollutant detection in terms of their low toxicity, high stability, facile processability, and unique optical properties. Next, we discuss the status quo and future prospects of AuNP-based colorimetric sensors for the detection of water pollutants. We believe that this review will promote research and development of AuNP as next-generation colorimetric transducers for water pollutant detection.

Carbon-polymer dot-based UV absorption and fluorescence performances for heavy metal ion detection

In previous reports, carbon dots (CDs) were customarily used as fluorescent probes to detect heavy metal ions. However, scientists neglected to take advantage of the excellent UV absorption properties of CDs to detect heavy metal ions. Herein, we synthesized nitrogen-containing carbon polymer dots (N-CPDs) for the determination of Co²⁺ ions in water samples by a one-step hydrothermal method using l-histidine and ethylene imine polymer as raw materials. The N-CPDs were characterized by ultraviolet-visible spectrum (UV-vis), infrared spectrum (FT-IR), X-ray photoelectron spectrum (XPS) and transmission electron microscopy (TEM) techniques. They possess superior full-band UV absorption performance and the surface is rich in multifunctional groups such as -COOH, -CN-, -OH, etc. When Co²⁺ was added to N-CPDs solution, the color of the solution rapidly changed from colorless to yellow-brown, which was visible to the naked eye. The UV absorption intensity of N-CPDs changed, and the fluorescence was instantly quenched, due to the formation of chelate between Co²⁺ and N-CPDs, and the FRET process occurred. The detection of Co²⁺ showed good linearity for both fluorescence and UV absorption spectroscopy modes in the range of 0-200 μM, and the limit of detection were 1.0023 μM and 0.75 μM, respectively. These two methods have the advantages of simple operation, remarkable selectivity and small sample size, which can be applied to the field detection of Co²⁺ in water samples. It is possible to develop the UV absorption properties of CDs to detect the ions.

Quadruple analyte responsive platform: Point-of-care testing and multi-coding logic computation based on metal ions recognition and selective response

While it is recognized that instrumentation techniques can provide precise and sensitive solutions to heavy metal ion monitoring, it remains challenging to transform laboratory testing into a convenient, on-site, and quantitative sensing platform for point-of-care testing (POCT) in a resource-constrained setting. To address these limitations, an affordable and user-friendly colorimetric POCT sensing system is proposed here for selectively monitoring four metal ions (Fe³⁺, Co²⁺, Pb²⁺, and Cd²⁺) based on the sulfur quantum dots (S dots). Quadruple distinct visual signals (green, brown, precipitation, and bright yellow) are presented on the fabricated paper-based analytical devices (PADs) when mixing S dots and metal ions. The high-quality photographs of the PADs are captured by a scanner, while a smartphone App converts visual signals to HSV values. The quantitative analysis relies on the digital colorimetric reading, and the limits of detection are 0.59, 0.47, 0.82, and 0.53 μM for Fe³⁺, Co²⁺, Cd²⁺, and Pb²⁺, respectively. This metal ions-responsive platform is engineered as a smart strategy for multiple logic operations (YES, NOT, AND, INHIBIT, and NOR) by integrating multi-responsive blocks into the S dots with encoded patterns, which improves the computing capability. Accordingly, this strategy demonstrates its potential for on-site environmental testing and sophisticated molecular computation.

Rapid Detection of Neisseria gonorrhoeae Genomic DNA Using Gold Nanoprobes Which Target the Gonococcal DNA Uptake Sequence

The rapid spread of antimicrobial resistant Neisseria gonorrhoeae continues to pose a serious threat to global health. To successfully treat and control gonococcal infections, rapid diagnosis is critical. Currently, nucleic acid amplification tests are the recommended diagnostic, however, these are both technically demanding and time consuming, making them unsuitable for resource-poor clinics. Consequently, there is a substantial need for an affordable, point-of-care diagnostic to use in these settings. In this study, DNA-functionalised gold nanoparticles (gold nanoprobes), with the ability to specifically detect the DNA Uptake Sequence (DUS) of Neisseria gonorrhoeae, were prepared. Using complementary annealing, the gold nanoprobes were shown to hybridise to genomic gonococcal DNA, causing a significant shift in their salt stability. By exploiting the shift in nanoprobe stability under the presence of target DNA, a solution-based colorimetric diagnostic for gonococcal DNA was prepared. Detection of purified genomic DNA was achieved in under 30 minutes, with a detection limit of 15.0 ng. Significantly, testing with DNA extracted from an off-target control organism suggested specificity for Neisseria. These results highlight the potential of DUS-specific gold nanoprobes in the rapid point-of-care diagnosis of gonococcal infections.

Hybrid Nanocomposites of Plasmonic Metal Nanostructures and 2D Nanomaterials for Improved Colorimetric Detection

Plasmonic phenomena and materials have been extensively investigated for a long time and gained popularity in the last few years, finding in the design of the biosensors platforms promising applications offering devices with excellent performances. Hybrid systems composed of graphene, or other 2D materials, and plasmonic metal nanostructures present extraordinary optical properties originated from the synergic connection between plasmonic optical effects and the unusual physicochemical properties of 2D materials, thus improving their application in a broad range of fields. In this work, firstly, an overview of the structures and properties of 2D nanomaterials will be provided along with the physics of surface plasmon resonance and localized surface plasmon resonance. In the second part of the work, some examples of colorimetric biosensors exploiting the outstanding properties of hybrids nanocomposites will be presented. Finally, concluding perspectives on the actual status, challenges, and future directions in plasmonic sensing biosensing will be provided. Special emphasis will be given to how this technology can be used to support digitalization and virtualization in pandemic handling.

Silicon nanoparticles / gold nanoparticles composite as a fluorescence probe for sensitive and selective detection of Co2+ and vitamin B12 based on the selective aggregation and inner filter effect

Cobalt as a transition metal ion is a biologically essential trace element, and plays an important role in various biological systems. The silicon nanoparticles (SiNPs) / gold nanoparticles (AuNPs) composite as a simple and efficient fluorescent probe was developed to detect Co²⁺ and vitamin B₁₂ (VB₁₂) based on the selective aggregation and inner filter effect (IFE). The green-emitting SiNPs were synthesized by one-pot hydrothermal method, and the AuNPs were synthesized and modified with thioglycolic acid and cetyltrimethylammonium bromide. The fluorescent probe was fabricated by simple mixing the SiNPs and AuNPs together. In the presence of Co²⁺/VB₁₂, AuNPs are selectively aggregated, which results in the enhancement of the local surface plasmon resonance absorption centered at 520 nm and the green fluorescence of SiNPs is significantly quenched via IFE. The fluorescence quenching efficiency of the probe is linearly proportional to the concentration of Co²⁺ in the range of 0.1-80 µM with a low detection limit of 60 nM, which is far lower than the guideline value of Co²⁺ in drinking water (1.7 µM). For vitamin B₁₂ (VB₁₂), its linear relationship is in the range of 0.1-100 µM, and the limit of detection is 69 nM. Furthermore, the proposed method shows good selectivity for the detection of Co²⁺ and VB₁₂, and does not need sophisticated pretreatment, only through simple filter. It has been applied in actual environmental water samples and drug tablets with satisfactory results.

Peptide-Based Sensing, Logic Computing, and Information Security on the Antimonene Platform

Peptides have higher information density than DNA and equivalent molecular recognition ability and durability. However, there are currently no reports on the comprehensive use of peptides' recognition ability and structural diversity for sensing, logic computing, information coding, and protection. Herein, we, for the first time, demonstrate peptide-based sensing, logic computing, and information security on the antimonene platform. The molecular recognition capability and structural diversity (amino acid sequence) of peptides (Pb²⁺-binding peptide DHHTQQHD as a model) adsorbed on the antimonene universal fluorescence quenching platform were comprehensively utilized to sense targets (Pb²⁺) and give a response (fluorescence turn-on) and then to encode, encrypt, and hide information. Fluorescently labeled peptides used as the recognition probe and the information carrier were quenched and hidden by the large-plane two-dimensional material antimonene and specifically bound by Pb²⁺ as the stego key, resulting in fluorescence recovery. The above interaction and signal change can be considered as a peptide-based sensing and steganographic process to further implement quantitative detection of Pb²⁺, complex logic operation, information coding, encrypting, and hiding using a peptide sequence and the binary conversion of its selectivity. This research provides a basic paradigm for the construction of a molecular sensing and informatization platform and will inspire the development of biopolymer-based molecular information technology (processing, communication, control, security).

Peptide Linked Diacetylene Amphiphiles for Detection of Epitope Specific Antibodies

Antibodies produced in response to adaptive immunity provide a receptor with multiple sites for binding to a distinct epitope of an antigen. Determining antibody levels to specific antigens has important clinical applications in assessing immune status or deficiency, monitoring infectious or autoimmune diseases, and diagnosing allergies. Leveraging that a specific antibody will bind to a distinct small peptide epitope without requiring the entire antigen to be present, we demonstrate in this work a proof-of-concept assay to detect the presence of an antibody by using peptide epitopes linked to an amphiphile to generate a vesicle-based sensing system. By affording multiple copies of the epitope site on the vesicle, we revealed that the vesicles visibly aggregate in response to an antibody specific for that epitope due to multivalent binding provided by the antibody. We also uncovered the role of peptide surface density in providing accessible epitopes on the vesicles for antibody binding. In summary, using a peptide derived from the coat protein of human influenza virus directly linked to a diacetylene-containing amphiphile afforded peptide-laden vesicles that proved capable of detecting the presence of antibodies specific for human influenza hemagglutinin.

Electrochemical detection of Cd(ii) ions in complex matrices with nanopipets

Heavy metal contamination and its detrimental health effects are a growing concern globally. Several metal mitigation systems and regulatory approaches have been implemented to minimize the negative impacts on human health. However, none of these function at maximum efficiency, mainly due to the lack of accurate information about metal speciation. Therefore, there is a critical need to develop novel, cheap, efficient, and robust metal detecting sensors. In this study, we describe the application of a nanopipet based electrochemical sensor to detect aqueous Cd(ii) ions. The inner radius of our nanopipets is ∼300 nm, and the fundamental mechanism behind our sensor's response is ion transfer between two immiscible electrolyte solutions (ITIES). The absence of redox behavior makes ITIES an excellent, attractive electrochemical tool to study various ions in aqueous solutions. In this study, we used 1,10-phenanthroline as our ionophore in the organic phase (dichloroethane) to facilitate the transfer of Cd(ii) ions from the polar aqueous phase to the less polar organic phase. Unlike previous studies, we characterized our nanopipet in complicated matrices, including, but not limited to, tris buffer and artificial seawater. We performed quantitative assessments to determine our sensor's limit of detection, stability, sensitivity, and selectivity. We further show that our nanosensor can detect free Cd(ii) ions in the presence of strong complexing agents such as ethylenediaminetetraacetic acid, 2,3-dimercaptosuccinic acid, etc. We quantified the concentration of free Cd(ii) ions in a water sample collected from a local lagoon. Thus, we showcased the power of our nanopipets to act as a robust, accurate, and efficient speciation sensor to detect Cd(ii) ions in environmental samples.

Peptide-Based Capture of Chikungunya Virus E2 Protein Using Porous Silicon Biosensor

The detection of pathogens presents specific challenges in ensuring that biosensors remain operable despite exposure to elevated temperatures or other extreme conditions. The most vulnerable component of a biosensor is typically the bioreceptor. Accordingly, the robustness of peptides as bioreceptors offers improved stability and reliability toward harsh environments compared to monoclonal antibodies that may lose their ability to bind target molecules after such exposures. Here, we demonstrate peptide-based capture of the Chikungunya virus E2 protein in a porous silicon microcavity biosensor at room temperature and after exposure of the peptide-functionalized biosensor to high temperature. Contact angle measurements, attenuated total reflectance-Fourier transform infrared spectra, and optical reflectance measurements confirm peptide functionalization and selective E2 protein capture. This work opens the door for other pathogenic biomarker detection using peptide-based capture agents on porous silicon and other surface-based sensor platforms.

Peptide-based system for sensing Pb2+ and molecular logic computing

Peptides with recognition, assembly, various activities exhibit strong power and application prospects in sensing, material science, biomedicine. However, peptide-based sensing and expanding application is still at an early stage. Herein, a peptide-based sensing and logic system was developed for highly sensitive and selective detection of Pb²⁺ and implementation of logic operations. Our Pb²⁺ assay method was ultra-rapid (less than 1 min), direct, simple with detection limit of 0.75 nM. Flexibility and scalability of peptide-based solution system facilitated the execution of sensing and logic operations from simple to complex. This research will not only inspire discovery and comprehensive applications (such as sensing and assembly) of more functional peptides, but also provide more opportunities for development and design of peptide-based systems and molecular information technologies.

Nanoremediation technologies for sustainable remediation of contaminated environments: Recent advances and challenges

A major and growing concern within society is the lack of innovative and effective solutions to mitigate the challenge of environmental pollution. Uncontrolled release of pollutants into the environment as a result of urbanisation and industrialisation is a staggering problem of global concern. Although, the eco-toxicity of nanotechnology is still an issue of debate, however, nanoremediation is a promising emerging technology to tackle environmental contamination, especially dealing with recalcitrant contaminants. Nanoremediation represents an innovative approach for safe and sustainable remediation of persistent organic compounds such as pesticides, chlorinated solvents, brominated or halogenated chemicals, perfluoroalkyl and polyfluoroalkyl substances (PFAS), and heavy metals. This comprehensive review article provides a critical outlook on the recent advances and future perspectives of nanoremediation technologies such as photocatalysis, nano-sensing etc., applied for environmental decontamination. Moreover, sustainability assessment of nanoremediation technologies was taken into consideration for tackling legacy contamination with special focus on health and environmental impacts. The review further outlines the ecological implications of nanotechnology and provides consensus recommendations on the use of nanotechnology for a better present and sustainable future.

Fluorescent pattern recognition of metal ions by nanoparticles of bovine serum albumin as a chemical nose/tongue

A sensor array mimicking a chemical nose/tongue based on bovine serum albumin nanoparticles (BSANsn) has been developed for the fluorescence pattern recognition of metal ions in biofluids. Three types of BSANsn (BSANs10, BSANs20, and BSANs40) show the same excitation/emission peak at 478/526 nm. According to the differential fluorescence variation, the sensor array shows particular fluorescence response patterns depending upon metal ions. Upon principal component analysis (PCA), it was found that the sensor array can distinguish 18 metal ions clearly at a concentration of as low as 10 μM. Moreover, different concentrations of metal ions and mixed metal ions of diverse kinds or valence states can be differentiated by the sensor in biofluids. In addition, the results were well consistent with those obtained with the traditional ICP-AES method.

One-pot synthesis of nitrogen-doped carbon dots for highly sensitive determination of cobalt ions and biological imaging

In this work, a facile, economical and green method for the preparation of nitrogen-doped carbon dots (N-CDs) was established via hydrothermal synthesis using p-phenylenediamine and asparagine. The as-prepared N-CDs were characterized by Transmission electron microscopy (TEM), X-ray diffraction patterns (XRD), Raman, Fourier transform infrared spectroscopy (FT-IR) and other methods. Furthermore, the N-CDs showed high sensitivity toward cobalt (II) ion (Co²⁺). Interestingly, the fluorescence of N-CDs was quenched linearly in the 0.3-65 μM Co²⁺ concentrations range, under the optimum conditions, displaying a fast response toward Co²⁺ with the detection limit as low as 22 nM. Simultaneously, this method was applied in the analysis of water samples with considerable results. Finally, the N-CDs were successfully utilized as the imaging probe of live root tip tissue of Arabidopsis thaliana, demonstrating that the N-CDs possessed significant theoretical research meaning in the fields of biological correlation analysis, environmental monitoring and disease diagnosis.

Environmentally benign synthesis of fluorescent carbon nanodots using waste PET bottles: highly selective and sensitive detection of Pb2+ ions in aqueous medium

Green fluorescent carbon nanodots (size ∼6 nm) as a turn-off fluorescent optical nano-sensor for selective and sensitive detection of Pb²⁺ ions from aqueous medium.

Colorimetric Nanoplasmonics to Spot Hyperglycemia From Saliva

Early diagnostics and point-of-care (POC) devices can save people's lives or drastically improve their quality. In particular, millions of diabetic patients worldwide benefit from POC devices for frequent self-monitoring of blood glucose. Yet, this still involves invasive sampling processes, which are quite discomforting for frequent measurements, or implantable devices dedicated to selected chronic patients, thus precluding large-scale monitoring of the globally increasing diabetic disorders. Here, we report a non-invasive colorimetric sensing platform to identify hyperglycemia from saliva. We designed plasmonic multibranched gold nanostructures, able to rapidly change their shape and color (naked-eye detection) in the presence of hyperglycemic conditions. This "reshaping approach" provides a fast visual response and high sensitivity, overcoming common detection issues related to signal (color intensity) losses and bio-matrix interferences. Notably, optimal performances of the assay were achieved in real biological samples, where the biomolecular environment was found to play a key role. Finally, we developed a dipstick prototype as a rapid home-testing kit.

A paper-based conductive immunosensor for the determination of Salmonella Typhimurium

We report for the first time a highly sensitive and rapid quantitative method for the detection of Salmonella Typhimurium (S. Typhimurium) using a conductive immunosensor on a paper-based device (PAD). S. Typhimurium monoclonal antibodies (MA) were first immobilized on a paper-based device and then captured by S. Typhimurium. After an immunoreaction on the device, the polyclonal antibody-colloidal gold conjugate (PA-AuNPs) was dropped to bind with S. Typhimurium. After a complete sandwich reaction, a dark red color appeared on the paper-based device, which can be observed by the naked eye for a rapid screening test. The electrical conductivity of PA-AuNPs between the screen-printed electrodes on the paper-based device was also measured for an accurate quantitative analysis. The electrical conductivity correlated well with the concentration of S. Typhimurium, which was controlled by the amount of S. Typhimurium attached to the polyclonal antibody-colloidal gold conjugate. The device showed a linear correlation for the concentration of the S. Typhimurium in the range of 10-10⁸ CFU mL^-1 in a logarithmic plot, with an R² value of 0.9882 and a limit of detection (LOD) as low as 10 CFU mL^-1. This simple, highly sensitive, and rapid method for the S. Typhimurium detection was successfully performed within 30 min, and it can be developed into small portable measuring devices in order to facilitate preliminary screening tests.

A label-free multifunctional nanosensor based on N-doped carbon nanodots for vitamin B12 and Co2+ detection, and bioimaging in living cells and zebrafish

Multifunctional N-doped carbon nanodots (N-CNDs) with a fluorescence (FL) quantum yield (QY) of 13.6% have been synthesized via a facile one-step hydrothermal process using Artemisia annua and 1,2-ethylenediamine as precursors. As-prepared N-CNDs showed excellent FL properties and were developed as a multifunctional sensing platform for vitamin B₁₂ (VB₁₂) and Co²⁺ determination, and bioimaging in living cells and zebrafish. The FL of N-CNDs is quenched efficiently in the presence of VB₁₂ on the basis of the inner filter effect (IFE) or Co²⁺ by static quenching, respectively. EDTA as a masking agent enables Co²⁺ to be effectively eliminated and N-CNDs were used to selectively detect VB₁₂ in the presence of both VB₁₂ and Co²⁺. The present FL nanosensor can detect VB₁₂ and Co²⁺ in the linear ranges of 0.5-35 μM and 2.5-25 μM with the corresponding detection limits of 47.4 nM and 230.5 nM, respectively. The study proved that the determination of Co²⁺ was based on the static quenching to form a complex between the amino group of N-CNDs and Co²⁺. Inspired by these outstanding properties, practical applications of this nanosensor for the detection of VB₁₂ in actual samples (human serum, egg yolk, VB₁₂ tablets and VB₁₂ injection) and Co²⁺ in water samples were further verified with satisfactory results. The as-constructed N-CNDs have negligible toxicity and good biocompatibility, which facilitates utilization of N-CNDs in bioimaging of A549 cells and zebrafish, and sensing VB₁₂ in living cells.

Sensitively detecting mTBI biomarker S100B by using peptide-modified ratiometric fluorescent C/AuNCs nanoprobe

Mild traumatic brain injury (mTBI) has become a tough nut in forensic science because of its minor damages but serious consequences. Utilizing biomarkers to diagnose mTBI has become a promising approach due to various shortcomings of traditional diagnostic methods. In this work, we developed a peptide-modified ratiometric fluorescent nanoprobe based on carbon dots (CDs) and gold nanoclusters (AuNCs) for the measurements of a pivotal biomarker S100B protein in the early diagnosis of mTBI. It has been found that florescence intensity of AuNCs at 580 nm was decreased as report signal while the florescence intensity of CDs was unchanged as reference signal in this sensing system when the surface modified peptide bind tightly with calcium-activated S100B. Under the optimized conditions, S100B concentration ranging from 0.03 to 1 μg/mL was successfully determined within 30 min, and the detection limit of 0.01 μg/mL was acquired through the standard rule (S/N = 3). Moreover, the detection of S100B in spiked blood samples were conducted with satisfactory recoveries. The as-prepared ratiometric fluorescent nanoprobe was proved to be a time-saving, convenient, and sensitive strategy, and it showed great prospects in the early diagnosis of mTBI in forensic practice.

Rapid ratiometric detection of Cd2+ based on the formation of ZnSe/CdS quantum dots

Developing simple and sensitive non-aggregation strategy for detecting Cd²⁺ is necessary for improving the selectivity and sensitivity of probe. Here, we establish a simple, rapid and ratiometric strategy for the recognition of Cd²⁺ based on the formation of core-shell ZnSe/CdS structure using ZnSe quantum dots (QDs). The transformation from binary ZnSe QDs to core-shell ZnSe/CdS QDs both change the elemental composition and structure of ZnSe QDs, leading to the changes in band gap of ZnSe QDs, which could be observed in the UV-vis spectra. In the detection process, ZnSe QDs only possess absorption peak at 343 nm, the formation of ZnSe/CdS after the addition of Cd²⁺ leads to the appearance of the new peak at 397 nm, while other heavy metal ions could not cause the appearance of new absorption peak. Therefore, this strategy shows good selectivity for Cd²⁺ detection. Based on this strategy, the limit of detection (LOD) for Cd²⁺ is 11 nM by UV-vis spectroscopy with a desirable relation of linearity (R² = 0.999) between A₃₉₇/A₃₄₃ and Cd²⁺ contents, which is superior to the LOD of most reported nanomaterials. The response time for Cd²⁺ detection is as short as 60 s, which is suitable for rapid detection. This ratiometric probe has also been applied to the detection of Cd²⁺ in tap water samples, the recovery of Cd²⁺ was between 94.9% and 105.6% for tap water samples, indicating the high accuracy of our ratiometric assay. Our strategy not only provided a new method for detecting Cd²⁺, but also put forward an implication that the band energy changes of QDs caused by heavy metal ions can be applied in the selective and sensitive detection of heavy metal ions.

Self-assembled gold nanoparticles and amphiphile peptides: a colorimetric probe for copper(ii) ion detection

We show that arginine/phenylalanine based peptides can be used to control the aggregation of gold nanoparticles in different ways. The arrangement provides a colorimetric approach to detect Cu²⁺ ions in water.

Target triggered fluorescence "turn-off" of silicon nanoparticles for cobalt detection and cell imaging with high sensitivity and selectivity

Cobalt ions (Co²⁺) are among heavy metals ions which cause pollution in environment because of their toxicity and improper degradation. In this work, a new fluorescent approach based on silicon nanoparticles (Si NPs) was designed for Co²⁺ detection. The fluorescent Si NPs were prepared by mixing 3-aminopropyl trimethoxysilane (APTES) and basic fuchsin, and under the excitation of 400 nm, they emitted green fluorescence at 515 nm. The prepared Si NPs were highly soluble in water, stable to salt and pH, and their fluorescence emission was extremely constant, with the quantum yield of 2.28%. The detailed mechanism studies showed that Co²⁺ effectively quenched the fluorescence of Si NPs by forming static complex. After optimizing the reaction parameters, a good linear relationship for Co²⁺ was observed from 0.2 to 60 μM, and the limit of detection was 0.14 μM that is lower than the guideline announced by Department of Environmental Protection for drinking water (1.7 μM). The preparation method of Si NPs was cheap, rapid and simple, and the fluorescent approach was applied to determine Co²⁺ in Yellow river water, drinking water, and industrial wastewater. Moreover, the Si NPs has good response to exogenous Co²⁺ in HepG2 cell imaging.

Design and analysis of surface plasmon resonance optical sensor for determining cobalt ion based on chitosan-graphene oxide decorated quantum dots-modified gold active layer

In this study, the incorporation of surface plasmon resonance (SPR) spectroscopy with novel chitosan-graphene oxide/cadmium sulphide quantum dots (CdS QDs) active layer for cobalt ion (Co²⁺) detection has been developed. The interaction of different Co²⁺ concentrations with the novel modified active layer was monitored using the SPR technique. From the SPR results, detection range, sensitivity, full width at half maximum (FWHM), detection accuracy (DA) and signal-to-noise ratio (SNR) have been analysed. The results showed the detection range of this optical sensor was 0.01 to 10 ppm, and it was saturated for higher concentration of Co²⁺. The sensitivity obtained was 0.1188 ppm^-1 for low concentration of Co²⁺ ranged from 0.01 to 1 ppm. The FWHM and DA were consistent for all concentration of Co²⁺, while the SNR of the SPR signal increased with the Co²⁺ concentration. The SPR angle shifts were also fitted using Langmuir, Freundlich and Sips (Langmuir-Freundlich) isotherm models, where Sips model fitted the best with the binding affinity of 0.939 ppm^-1. The results proved that the novel chitosan-graphene oxide/CdS QDs modified gold thin film can detect Co²⁺ via SPR spectroscopy.

Peptide Nanocarriers for Detection of Heavy Metal Ions Using Resistive Pulse Sensing

The use of nanocarriers within resistive pulse sensing facilitates the detection and quantification of analytes. To date the field has been dominated by polyionic carriers or nanomaterials. Together they combine the recognition elements of a ligand with a stable support, facilitating the sample handling, analysis times, and multiplex detection. Here we develop the use of peptide-functionalized superparamagnetic nanocarriers to extract and quantify metal ions in solution. The interaction between nickel and the peptide ligand is measured as a change in translocation velocity of the carrier. The magnitude of change is proportional to the concentration of the metal ions in solution. Unlike DNA aptamers where a change in the tertiary structure and the folding of the polyanionic backbone influences the carrier velocity, the peptides here had a lower net charge under the assay conditions. To try and enhance the signal we engineered charged groups within the peptide to explore the effects on the signal. In all cases the metal ion binding dominated the velocity of the carrier. The assay was shown to work across 3 orders of magnitude and can detect Ni²⁺ in the presence of some other heavy metal ions. We demonstrate this by quantifying Ni²⁺ in both tap and pond water. The work allows for future multiplexed sensing strategies using both peptides and DNA aptamers in resistive pulse sensors.

One Step Preparation of Peptide-Coated Gold Nanoparticles with Tunable Size

Gold nanoparticles (AuNPs) made from self-assembling peptides have been used in many research fields and attracted a great deal of attention due to their high stability, biocompatibility and functionality. However, existing preparation methods for peptide-coated AuNPs are post-synthesis processes, which are complicated and time consuming. Therefore, a one-step preparation method for peptide-coated AuNPs is proposed here. The AuNPs obtained by this method exhibit good stability. Importantly, peptide-coated AuNPs with precise different sizes can be prepared by this method through pH control of reducing reagent tyrosine in range of 10.0~12.7. Thus, the one-step preparation method proposed here provides a significant tool for the research in different fields concerning NP size, stability and biocompatibility.

Functionalized gold nanoparticles for sample preparation: A review

Sample preparation is a crucial step for the reliable and accurate analysis of both small molecule and biopolymers which often involves processes such as isolation, pre-concentration, removal of interferences (purification), and pre-processing (e.g., enzymatic digestion) of targets from a complex matrix. Gold nanoparticle (GNP)-assisted sample preparation and pre-concentration has been extensively applied in many analytical procedures in recent years due to the favorable and unique properties of GNPs such as size-controlled synthesis, large surface-to-volume ratio, surface inertness, straightforward surface modification, easy separation requiring minimal manipulation of samples. This review article primarily focuses on applications of GNPs in sample preparation, in particular for bioaffinity capture and biocatalysis. In addition, their most common synthesis, surface modification and characterization methods are briefly summarized. Proper surface modification for GNPs designed in accordance to their target application directly influence their functionalities, e.g., extraction efficiencies, and catalytic efficiencies. Characterization of GNPs after synthesis and modification is worthwhile for monitoring and controlling the fabrication process to ensure proper quality and functionality. Parameters such as morphology, colloidal stability, and physical/chemical properties can be assessed by methods such as surface plasmon resonance, dynamic light scattering, ζ-potential determinations, transmission electron microscopy, Taylor dispersion analysis, and resonant mass measurement, among others. The accurate determination of the surface coverage appears to be also mandatory for the quality control of functionality of the nanoparticles. Some promising applications of (functionalized) GNPs for bioanalysis and sample preparation are described herein.

Low-temperature phyto-synthesis of copper oxide nanosheets: Its catalytic effect and application for colorimetric sensing

The last decade has seen a remarkable detonation in modifying chemical processes for nanomaterial synthesis to make them 'green'. Owing to the unique properties of nanomaterial and with regard to environmental issues, in this study, a new alternative and fast eco-friendly approach for the synthesis of copper oxide nanosheets (CuO-NSs) using Terminalia catappa (Indian almond) leaf extract as a renewable and non-toxic reducing agent and efficient stabilizer was reported. It is noteworthy to mention that the present fabrication process can open up the possibility of fast, low cost and high efficiency synthesis of CuO nanostructures with an interesting morphology of nanosheets at ambient temperature and pressure. Optimization of important factors such as pH, the quantity of leaf extract, copper precursor concentration, incubation time and temperature on the formation of CuO-NSs were investigated. The formation of bioreduced CuO-NSs was certified by UV-Vis spectroscopy, XRD, TEM analysis and FT-IR spectroscopy. Due to good stability, and excellent catalytic activity of the synthesized CuO-NSs, they are exerted to degrade of MB dye in water as a model color pollutant in the presence of NaBH₄ at room temperature. Furthermore, color properties of CuO nanostructures aid us to apply these biosynthesized nanomaterials in the design of optical sensors for detection of Fe²⁺ and Fe³⁺ ions. In view of many advantages of the current optical sensors based on CuO-NSs, such as eco-friendly, cost-effective, and straightforward design, the sensing system presents a potential application in environmental science.

'Green' synthesis of metals and their oxide nanoparticles: applications for environmental remediation

In materials science, “green” synthesis has gained extensive attention as a reliable, sustainable, and eco-friendly protocol for synthesizing a wide range of materials/nanomaterials including metal/metal oxides nanomaterials, hybrid materials, and bioinspired materials. As such, green synthesis is regarded as an important tool to reduce the destructive effects associated with the traditional methods of synthesis for nanoparticles commonly utilized in laboratory and industry. In this review, we summarized the fundamental processes and mechanisms of “green” synthesis approaches, especially for metal and metal oxide [e.g., gold (Au), silver (Ag), copper oxide (CuO), and zinc oxide (ZnO)] nanoparticles using natural extracts. Importantly, we explored the role of biological components, essential phytochemicals (e.g., flavonoids, alkaloids, terpenoids, amides, and aldehydes) as reducing agents and solvent systems. The stability/toxicity of nanoparticles and the associated surface engineering techniques for achieving biocompatibility are also discussed. Finally, we covered applications of such synthesized products to environmental remediation in terms of antimicrobial activity, catalytic activity, removal of pollutants dyes, and heavy metal ion sensing.

Optical assays based on colloidal inorganic nanoparticles

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs in nanocomposites can have additional advantages. Magnetic NPs and ZnO, TiO2 and ZnS as well as insulator NPs including SiO2 can be employed in colorimetric assays, and some can act as peroxidase mimics in catalytic applications. This review covers the synthesis and stabilization of inorganic NPs and their diverse applications in colorimetric and optical assays for analytes related to environmental contamination (metal ions and pesticides), and for early diagnosis and monitoring of diseases, using medically important biomarkers.

Rational design of an anchoring peptide for high-efficiency and quantitative modification of peptides and DNA strands on gold nanoparticles

The pentapeptide Cys-Ala-Leu-Asn-Asn (CALNN) could stabilize gold nanoparticles (AuNPs), most of which serve as anchoring blocks for various bioanalyses by introducing recognition blocks. However, the typical conjugation strategy greatly suffers from excessive use of peptides, overnight incubation and consequently low efficiency. In this study, new design criteria for the efficacious anchor were established. In addition, a stable, instantaneous and effective modification of the anchoring peptide RRFPDD or its derivatives on AuNPs is first proposed for the first time. With low consumption of peptides (50 μM), the loading process could be realized in 100 seconds. The anchor RRFPDD also allowed for the quantitative adsorption of appended recognition blocks (e.g., peptides or DNAs), thus adjusting their proportions for better performance. In particular, the biological characteristics of those recognition blocks were fully retained. Furthermore, the anchor RRFPDD contributed to a time-saving and high-efficiency (85%) hydrolysis of peptide-capped AuNPs. Considering these advantages of the new anchor, a reliable assay for cardiac troponin I (cTnI) was developed with a detection limit as low as 0.45 ng mL-1, and also successfully applied in human serum samples.

Peptide-functionalized gold nanoparticles: versatile biomaterials for diagnostic and therapeutic applications

Colloidal gold solutions have been used for centuries in a wide variety of applications including staining glass and in the colouring of ceramics. More recently, gold nanoparticles (GNPs) have been studied extensively due to their interesting size-dependent electronic and optical properties. GNPs can be functionalized easily with biomolecules that contain thiols, amines, or even phosphine moieties. For example, the reaction of thiol-containing peptides with GNPs has been used extensively to prepare novel hybrid materials for biomedical applications. A range of different types of peptides can be used to access biomaterials that are designed to perform a specific role such as cancer cell targeting. In addition, specific peptide sequences that are responsive to external stimuli (e.g. temperature or pH) can be used to stabilise/destabilise the aggregation of colloidal GNPs. Such systems have exciting potential applications in the field of colorimetric sensing (including bio-sensing) and in targeted drug delivery platforms. In this review, we will give an overview of the current methods used for preparing peptide functionalized GNPs, and we will discuss their key properties outlining the various applications of this class of biomaterial. In particular, the potential applications of peptide functionalized GNPs in areas of sensing and targeted drug delivery will be discussed.

Localized surface plasmon resonance based biosensing

INTRODUCTION

Bioanalytical sensing based on the principle of localized surface plasmon resonance experiences is currently an extremely rapid development. Novel sensors with new kinds of plasmonic transducers and innovative concepts for the signal development as well as read-out principles were identified. This review will give an overview of the development of this field. Areas covered: The focus is primarily on types of transducers by preparation or dimension, factors for optimal sensing concepts and the critical view of the usability of these devices as innovative sensors for bioanalytical applications. Expert commentary: Plasmonic sensor devices offer a high potential for future biosensing given that limiting factors such as long-time stability of the transducers, the required high sensitivity and the cost-efficient production are addressed. For higher sensitivity, the design of the sensor in shape and material has to be combined with optimal enhancement strategies. Plasmonic nanoparticles from bottom-up synthesis with a post-synthetic processing show a high potential for cost-efficient sensor production. Regarding the measurement principle, LSPRi offers a large potential for multiplex sensors and can provide a high-throughput as well as highly paralleled sensing. The main trends are expected towards optimal LSPR concepts which represent cost-efficient and robust point-of-care solutions, and the use of multiplexed devices for clinical applications.