Synthesis and Structure-Property Relationship of meso-Substituted Porphyrin- and Benzoporphyrin-Thiophene Conjugates toward Electrochemical Reduction of Carbon Dioxide

A novel series of ZnII-trans-A2B2 porphyrins and benzoporphyrins bearing phenyl and thiophene-based meso-substituents was successfully synthesized and characterized by spectroscopic and electrochemical techniques. Systematic comparison among the compounds in this series, together with the corresponding A4 analogs previously studied by our group, led to the understanding of the effects of π-conjugated system extension of a porphyrin core through β-fused rings, replacement of the phenyl with the thiophene-based meso-groups, and introduction of additional thiophene rings on thienyl substituents on photophysical and electrochemical properties. Oxidative electropolymerization through bithiophenyl units of both A4 and trans-A2B2 analogs was achieved, resulting in porphyrin- and benzoporphyrin-oligothiophene conjugated polymers, which were characterized by cyclic voltammetry and absorption spectrophotometry. Preliminary studies on catalytic performance toward electrochemical reduction of carbon dioxide (CO2) was described herein to demonstrate the potential of the selected compounds for serving as homogeneous and heterogeneous electrocatalysts for the conversion of CO2 to carbon monoxide (CO).

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Investigations of a Copper(II) Bipyridyl-N-Heterocyclic Carbene Macrocycle for CO2 Reduction: Apparent Formation of an Imidazolium Carboxylate Intermediate Leading to Demetalation

A copper complex supported by a redox-active bipyridyl-N-heterocyclic carbene based ligand framework is reported. From X-ray crystallography, the tetradentate macrocycle provides a distorted square planar geometry around the copper metal center. The complex was investigated for the electrocatalytic CO2 reduction reaction (CO2RR) in acetonitrile solutions. Electronic structure calculations were performed on the complex and associated intermediates to provide a fundamental understanding of the metal-ligand redox chemistry and are compared to the previously reported nickel and cobalt analogues. Unlike its predecessors, which are active catalysts for the CO2RR, the copper complex decomposes under reducing conditions in the presence of CO2. A novel decomposition route involving coordination of CO2 to an N-heterocyclic carbene (NHC) donor of the macrocyclic ligand is proposed based on density functional theory (DFT) calculations, which is supported by isolation of a putative ligand-CO2 adduct from the electrolyzed solution and its characterization by 1H NMR spectroscopy and mass spectrometry. The noninnocent behavior of the NHC donors presented here may have important implications for the stability and reactivity of other complexes supported by N-heterocyclic carbenes, and further suggests that cooperative and productive pathways involving metal-bound NHCs could be exploited for CO2 reduction.

Isolation, Characterization and Reactivity of Key Intermediates Relevant to Reductive (Electro)catalysis with Cp*Rh Complexes Containing Pyridyl-MIC (MIC=Mesoionic Carbene) Ligands

In recent years, metal complexes of pyridyl-mesoionic carbene (MIC) ligands have been reported as excellent homogeneous and molecular electrocatalysts. In combination with group 9 metals, such ligands form highly active catalysts for hydrogenation/transfer hydrogenation/hydrosilylation catalysis and electrocatalysts for dihydrogen production. Despite such progress, very little is known about the structural/electrochemical/spectroscopic properties of crucial intermediates for such catalytic reactions with these ligands: solvato complexes, reduced complexes and hydridic species. We present here a comprehensive study involving the isolation, crystallographic characterization, electrochemical/spectroelectrochemical/theoretical investigations, and in-situ reactivity studies of all the aforementioned crucial intermediates involving Cp*Rh and pyridyl-MIC ligands. A detailed mechanistic study of the precatalytic activation of [RhCp*] complexes with pyridyl-MIC ligands is presented. Intriguingly, amphiphilicity of the [RhCp*]-hydride complexes was observed, displaying the substrate dependent transfer of H+ , H or H- . To the best of our knowledge, this study is the first of its kind targeting intermediates and reactive species involving metal complexes of pyridyl-MIC ligands and investigating the interconversion amongst them.

Renewable Hydrogen Production and Storage Via Enzymatic Interconversion of CO2 and Formate with Electrochemical Cofactor Regeneration

The urgent need to reduce CO2 emissions has motivated the development of CO2 capture and utilization technologies. An emerging application is CO2 transformation into storage chemicals for clean energy carriers. Formic acid (FA), a valuable product of CO2 reduction, is an excellent hydrogen carrier. CO2 conversion to FA, followed by H2 release from FA, are conventionally chemically catalyzed. Biocatalysts offer a highly specific and less energy-intensive alternative. CO2 conversion to formate is catalyzed by formate dehydrogenase (FDH), which usually requires a cofactor to function. Several FDHs have been incorporated in bioelectrochemical systems where formate is produced by the biocathode and the cofactor is electrochemically regenerated. H2 production from formate is also catalyzed by several microorganisms possessing either formate hydrogenlyase or hydrogen-dependent CO2 reductase complexes. Combination of these two processes can lead to a CO2 -recycling cycle for H2 production, storage, and release with potentially lower environmental impact than conventional methods.

Exploring the mechanistic role of alloying elements in copper-based electrocatalysts for the reduction of carbon dioxide to methane

The promise of electrochemically reducing excess anthropogenic carbon dioxide into useful chemicals and fuels has gained significant interest. Recently, indium-copper (In-Cu) alloys have been recognized as prospective catalysts for the carbon dioxide reduction reaction (CO2RR), although they chiefly yield carbon monoxide. Generating further reduced C1 species such as methane remains elusive due to a limited understanding of how In-Cu alloying impacts electrocatalysis. In this work, we investigated the effect of alloying In with Cu for CO2RR to form methane through first-principles simulations. Compared with pure copper, In-Cu alloys suppress the hydrogen evolution reaction while demonstrating superior initial CO2RR selectivity. Among the alloys studied, In7Cu10 exhibited the most promising catalytic potential, with a limiting potential of -0.54 V versus the reversible hydrogen electrode. Analyses of adsorbed geometries and electronic structures suggest that this decreased overpotential arises primarily from electronic perturbations around copper and indium ions and carbon-oxygen bond stability. This study outlines a rational strategy to modulate metal alloy compositions and design synergistic CO2RR catalysts possessing appreciable activity and selectivity.

Photoinduced Catalytic Organic-Hydride Transfer to CO2 Mediated with Ruthenium Complexes as NAD+ /NADH Redox Couple Models

The catalytic organic-hydride transfer to CO₂ was first achieved through the photoinduced two-electron reduction of the [Ru(bpy)₂ (pbn)]²⁺ /[Ru(bpy)₂ (pbnHH)]²⁺ (bpy=2,2'-bipyridine, pbn=2-(pyridin-2-yl)benzo[b]-1,5-naphthyridine, and pbnHH=2-(pyridin-2-yl)-5,10-dihydrobenzo[b]-1,5-naphthyridine) redox couple in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH). The active species for the catalytic hydride transfer to carbon dioxide giving formate is [Ru(bpy)(bpy⋅^- )(pbnHH)]⁺ formed by one-electron reduction of [Ru(bpy)₂ (pbnHH)]²⁺ with BI⋅.

Recent Applications and Strategies to Enhance Performance of Electrochemical Reduction of CO2 Gas into Value-Added Chemicals Catalyzed by Whole-Cell Biocatalysts

Carbon dioxide (CO2) is one of the major greenhouse gases that has been shown to cause global warming. Decreasing CO2 emissions plays an important role to minimize the impact of climate change. The utilization of CO2 gas as a cheap and sustainable source to produce higher value-added chemicals such as formic acid, methanol, methane, and acetic acid has been attracting much attention. The electrochemical reduction of CO2 catalyzed by whole-cell biocatalysts is a promising process for the production of value-added chemicals because it does not require costly enzyme purification steps and the supply of exogenous cofactors such as NADH. This study covered the recent applications of the diversity of microorganisms (pure cultures such as Shewanella oneidensis MR1, Sporomusa species, and Clostridium species and mixed cultures) as whole-cell biocatalysts to produce a wide range of value-added chemicals including methane, carboxylates (e.g., formate, acetate, butyrate, caproate), alcohols (e.g., ethanol, butanol), and bioplastics (e.g., Polyhydroxy butyrate). Remarkably, this study provided insights into the molecular levels of the proteins/enzymes (e.g., formate hydrogenases for CO2 reduction into formate and electron-transporting proteins such as c-type cytochromes) of microorganisms which are involved in the electrochemical reduction of CO2 into value-added chemicals for the suitable application of the microorganism in the chemical reduction of CO2 and enhancing the catalytic efficiency of the microorganisms toward the reaction. Moreover, this study provided some strategies to enhance the performance of the reduction of CO2 to produce value-added chemicals catalyzed by whole-cell biocatalysts.

Electrochemical Characterization and CO2 Reduction Reaction of a Family of Pyridazine-Bridged Dinuclear Mn(I) Carbonyl Complexes

Three recently synthesized neutral dinuclear carbonyl manganese complexes with the pyridazine bridging ligand, of general formula [Mn₂(μ-ER)₂(CO)₆(μ-pydz)] (pydz = pyridazine; E = O or S; R = methyl or phenyl), have been investigated by cyclic voltammetry in dimethylformamide and acetonitrile both under an inert argon atmosphere and in the presence of carbon dioxide. This family of Mn(I) compounds behaves interestingly at negative potentials in the presence of CO₂. Based on this behavior, which is herein discussed, a rather efficient catalytic mechanism for the CO₂ reduction reaction toward the generation of CO has been hypothesized.

Counter Electrode Reactions-Important Stumbling Blocks on the Way to a Working Electro-organic Synthesis

Over the past two decades, electro-organic synthesis has gained significant interest, both in technical and academic research as well as in terms of applications. The omission of stoichiometric oxidizers or reducing agents enables a more sustainable route for redox reactions in organic chemistry. Even if it is well-known that every electrochemical oxidation is only viable with an associated reduction reaction and vice versa, the relevance of the counter reaction is often less addressed. In this Review, the importance of the corresponding counter reaction in electro-organic synthesis is highlighted and how it can affect the performance and selectivity of the electrolytic conversion. A selection of common strategies and unique concepts to tackle this issue are surveyed to provide a guide to select appropriate counter reactions for electro-organic synthesis.

Bioelectrocatalytic CO2 Reduction by Redox Polymer-Wired Carbon Monoxide Dehydrogenase Gas Diffusion Electrodes

The development of electrodes for efficient CO₂ reduction while forming valuable compounds is critical. The use of enzymes as catalysts provides the advantage of high catalytic activity in combination with highly selective transformations. We describe the electrical wiring of a carbon monoxide dehydrogenase II from Carboxydothermus hydrogenoformans (ChCODH II) using a cobaltocene-based low-potential redox polymer for the selective reduction of CO₂ to CO over gas diffusion electrodes. High catalytic current densities of up to -5.5 mA cm^-2 are achieved, exceeding the performance of previously reported bioelectrodes for CO₂ reduction based on either carbon monoxide dehydrogenases or formate dehydrogenases. The proposed bioelectrode reveals considerable stability with a half-life of more than 20 h of continuous operation. Product quantification using gas chromatography confirmed the selective transformation of CO₂ into CO without any parasitic co-reactions at the applied potentials.

Importance of steric bulkiness of iridium photocatalysts with PNNP tetradentate ligands for CO2 reduction

A series of Ir complexes has been developed as multifunctional photocatalysts for CO₂ reduction to give HCO₂H selectively. The catalytic activities and photophysical properties vary widely across the series, and the bulky group insertion resulted in the formation of HCO₂H and CO with the catalyst turnover number of >10 400.

Structure and Reactivity of Polynuclear Divalent Lanthanide Disiloxanediolate Complexes

Trinuclear molecular complexes of europium (II) and ytterbium(II) [Ln₃{(Ph₂SiO)₂O}₃(THF)₆], 1-Ln₃L₃ (Ln = Eu and Yb), supported by the dianionic tetraphenyl disiloxanediolate ligand, were synthesized via protonolysis of the [Ln{N(SiMe₃)₂}₂(THF)₂] complexes. In contrast, the reaction of [Sm{N(SiMe₃)₂}₂(THF)₂] with the (Ph₂SiOH)₂O ligand led to the isolation of the mixed-valent Sm(II)/Sm(III) complex [Sm₃{(Ph₂SiO)₂O}₃{N(SiMe₃)₂}(THF)₄], 2-Sm₃L₃, which was crystallographically characterized. The Eu(II) complex 1-Eu₃L₃ displays weak ferromagnetic coupling between the Eu(II) metal centers (J = 0.1035 cm^-1). The addition of 3 equiv of (Ph₂SiOK)₂O to 1-Eu₃L₃ resulted in the formation of the polynuclear Eu(II) dimer of dimers [K₄Eu₂{(Ph₂SiO)₂O}₄(Et₂O)₂]₂, 3-Eu₂L₄. Complexes 1-Ln₃L₃ (Ln = Eu and Yb) are stable in solution at room temperature, while 3-Eu₂L₄ shows higher reactivity and rapidly decomposes to give the mixed-valent Eu(II)/Eu(III) species [K₃Eu₂{(Ph₂SiO)₂O}₄], 4-Eu₂L₄. Complex 1-Yb₃L₃ affects the slow reductive disproportionation of carbon dioxide, but 1-Eu₃L₃ does not display any reactivity toward CO₂. However, the presence of one additional (Ph₂SiO^-)₂O per Eu(II) metal center in 3-Eu₂L₄ increases dramatically the reductive ability of the Eu(II) metal centers, affording the first example of carbon dioxide activation by an isolated divalent europium complex. The reduction of CO₂ by 3-Eu₂L₄ is immediate, and carbonate is formed selectively after the addition of a stoichiometric amount of CO_2.

Fabrication of a biocathode for formic acid production upon the immobilization of formate dehydrogenase from Candida boidinii on a nanoporous carbon

The immobilization of the non-metallic enzyme formate dehydrogenase from Candida boidinii (CbFDH) into a nanoporous carbon with appropriate pore structure was explored for the bioelectrochemical conversion of CO₂ to formic acid (FA). Higher FA production rates were obtained upon immobilization of CbFDH compared to the performance of the enzyme in solution, despite the lower nominal CbFDH to NADH (β-nicotinamide adenine dinucleotide reduced) cofactor ratio and the lower amount of enzyme immobilized. The co-immobilization of the enzyme and a rhodium complex as mediator in the nanoporous carbon allowed the electrochemical regeneration of the cofactor. Preparative electrosynthesis of FA carried out on biocathodes of relatively large dimensions (ca. 3 cm × 2 cm) confirmed the higher production rate of FA for the immobilized enzyme. Furthermore, the incorporation of a Nafion binder in the biocathodes did not modify the immobilization extent of the CbFDH in the carbon support. Coulombic efficiencies close to 46% were obtained for the electrosynthesis carried out at -0.8 V for the biocathodes prepared using the lowest Nafion binder content and the co-immobilized enzyme and rhodium redox mediator. Although these values may yet be improved, they confirm the feasibility of these biocathodes in larger scales (6 cm²) beyond most common electrode dimensions reported in the literature (ca. a few mm²).

Computational study on the reactivity of imidazolium-functionalized manganese bipyridyl tricarbonyl electrocatalysts [Mn[bpyMe(Im-R)](CO)3Br]+ (R = Me, Me2 and Me4) for CO2-to-CO conversion over H2 formation

We have recently reported a series of imidazolium-functionalized manganese bipyridyl tricarbonyl electrocatalysts, [Mn[bpyMe(Im-R)](CO)3Br]+ (R = Me, Me2, and Me4), for CO2-to-CO conversion in the presence of H2O as the proton source [J. Am. Chem. Soc., 2019, 141, 6569]. These catalysts feature slightly acidic imidazolium moieties in the secondary coordination sphere and reduce CO2 at mild electrochemical potentials. Here, we employ density functional theory (DFT) calculations to understand the electronic structure and reactivity for the CO2 reduction reaction (CO2RR) over the competing hydrogen evolution reaction (HER) using [Mn[bpyMe(ImMe)](CO)3Br]+ (1+). Our work indicates that, in the absence of water, the imidazolium ligand stabilizes the Mn-CO2 adduct through hydrogen bonding-like interactions, similar to the activated CO2 molecule in the C-cluster of the Ni,Fe-carbon monoxide dehydrogenase II, and assists the protonation steps during CO2RR and HER. More significantly, based on the energy span model, we demonstrate that the selectivity for CO2 fixation over proton reduction results from a higher activation energy for yielding the manganese dihydrogen intermediate before H2 release, which is the TOF determining transition state (TDTS) under an applied potential of Φ = -1.82 V versus Fc0/+. The calculated TOF also reflects the selectivity for CO2RR, which is four orders of magnitude larger than for HER, consistent with the CPE experiments that show no hydrogen was obtained. In the case of CO2 reduction, the TOF determining intermediate (TDI) corresponds to the doubly reduced active catalyst, 1C2(red2), which features a manganese(0) center that couples ferromagnetically with one unpaired electron in the π* orbital of bipyridine. On the other hand, for HER, the metal-hydride intermediate, 1C2(I11-R), is the TDI. Finally, second-order perturbation analyses imply that the strongest hydrogen bonding-like interaction at the C2 position in 1+ contributes to the higher catalytic activity with respect to [Mn[bpyMe(ImMe2)](CO)3Br]+ (2+) and [Mn[bpyMe(ImMe4)](CO)3Br]+ (3+) for CO2 fixation, consistent with the experimental data.

Soluble, crystalline, and thermally stable alkali CO2 - and carbonite (CO2 2-) clusters supported by cyclic(alkyl)(amino) carbenes

The mono- and dianions of CO2 (i.e., CO2 - and CO2 2-) have been studied for decades as both fundamentally important oxycarbanions (anions containing only C and O atoms) and as critical species in CO2 reduction and fixation chemistry. However, CO2 anions are highly unstable and difficult to study. As such, examples of stable compounds containing these ions are extremely limited; the unadulterated alkali salts of CO2 (i.e., MCO2, M2CO2, M = alkali metal) decompose rapidly above 15 K, for example. Herein we report the chemical reduction of a cyclic (alkyl)(amino) carbene (CAAC) adduct of CO2 at room temperature by alkali metals, which results in the formation of CAAC-stabilized alkali CO2 - and CO2 2- clusters. One-electron reduction of CAAC-CO2 adduct (1) with lithium, sodium or potassium metal yields stable monoanionic radicals [M(CAAC-CO2)] n (M = Li, Na, K, 2-4) analogous to the alkali CO2 - radical, and two-electron alkali metal reduction affords dianionic clusters of the general formula [M2(CAAC-CO2)] n (5-8) with reduced CO2 units which are structurally analogous to the carbonite anion CO2 2-. It is notable that crystalline clusters of these alkali-CO2 salts may also be isolated via the "one-pot" reaction of free CO2 with free CAAC followed by the addition of alkali metals - a process which does not occur in the absence of carbene. Each of the products 2-8 was investigated using a combination of experimental and theoretical methods.

Utilization of CO2 Feedstock for Organic Synthesis by Visible-Light Photoredox Catalysis

CO₂ is a highly abundant, green, and sustainable carbon feedstock. Despite its kinetic inertness and thermodynamic stability, the development of various catalytic techniques has enabled the conversion of CO₂ to value-added products such as carboxylic acids, amino acids, and heterocyclic compounds, where visible-light photocatalysis has emerged to be an efficient promoter of these processes. This Minireview covers the progress in the areas of CO₂ incorporation onto organic matters based on the combined venture of renewable resources of CO₂ and light energy with significant emphasis on the last three years' developments.

Immobilization of molecular catalysts for artificial photosynthesis

Artificial photosynthesis offers a way of producing fuels or high-value chemicals using a limitless energy source of sunlight and abundant resources such as water, CO2, and/or O2. Inspired by the strategies in natural photosynthesis, researchers have developed a number of homogeneous molecular systems for photocatalytic, photoelectrocatalytic, and electrocatalytic artificial photosynthesis. However, their photochemical instability in homogeneous solution are hurdles for scaled application in real life. Immobilization of molecular catalysts in solid supports support provides a fine blueprint to tackle this issue. This review highlights the recent developments in (i) techniques for immobilizing molecular catalysts in solid supports and (ii) catalytic water splitting, CO2 reduction, and O2 reduction with the support-immobilized molecular catalysts. Remaining challenges for molecular catalyst-based devices for artificial photosynthesis are discussed in the end of this review.

From Molecules to Porous Materials: Integrating Discrete Electrocatalytic Active Sites into Extended Frameworks

Metal-organic and covalent-organic frameworks can serve as a bridge between the realms of homo- and heterogeneous catalytic systems. While there are numerous molecular complexes developed for electrocatalysis, homogeneous catalysts are hindered by slow catalyst diffusion, catalyst deactivation, and poor product yield. Heterogeneous catalysts can compensate for these shortcomings, yet they lack the synthetic and chemical tunability to promote rational design. To narrow this knowledge gap, there is a burgeoning field of framework-related research that incorporates molecular catalysts within porous architectures, resulting in an exceptional catalytic performance as compared to their molecular analogues. Framework materials provide structural stability to these catalysts, alter their electronic environments, and are easily tunable for increased catalytic activity. This Outlook compares molecular catalysts and corresponding framework materials to evaluate the effects of such integration on electrocatalytic performance. We describe several different classes of molecular motifs that have been included in framework materials and explore how framework design strategies improve on the catalytic behavior of their homogeneous counterparts. Finally, we will provide an outlook on new directions to drive fundamental research at the intersection of reticular-and electrochemistry.

Homogeneous and heterogeneous molecular catalysts for electrochemical reduction of carbon dioxide

Carbon dioxide (CO2) is a greenhouse gas whose presence in the atmosphere significantly contributes to climate change. Developing sustainable, cost-effective pathways to convert CO2 into higher value chemicals is essential to curb its atmospheric presence. Electrochemical CO2 reduction to value-added chemicals using molecular catalysis currently attracts a lot of attention, since it provides an efficient and promising way to increase CO2 utilization. Introducing amino groups as substituents to molecular catalysts is a promising approach towards improving capture and reduction of CO2. This review explores recently developed state-of-the-art molecular catalysts with a focus on heterogeneous and homogeneous amine molecular catalysts for electroreduction of CO2. The relationship between the structural properties of the molecular catalysts and CO2 electroreduction will be highlighted in this review. We will also discuss recent advances in the heterogeneous field by examining different immobilization techniques and their relation with molecular structure and conductive effects.

Computational screening of transition metal/p-block hybrid electrocatalysts for CO2 reduction

Among all the pollutants in the atmosphere, CO₂ has the highest impact on global warming, and with the rising levels of this pollutant, studies on developing various technologies to convert CO₂ into carbon-neutral fuels and chemicals have become more valuable. In this work, we present a detailed computational study of electrochemical reduction of CO₂ reaction (the CO₂ RR) to methane and/or methanol over different transition metal-p block catalysts using density functional theory calculations. In addition to the catalyst structure, we studied reaction mechanisms using free energy diagrams that explain the product selectivity with respect to the competing hydrogen evolution reaction. Furthermore, we developed scaling relations between all the active C bound intermediate species with ΔG_(CO*) and O bound species with ΔG_(OH*) The limiting potential lines with ΔG_(OH*) as the descriptor are much less negative compared to U_L lines with ΔG_(CO*) as the descriptor indicating that catalyst materials following pathways via OH- bound intermediate species require more negative potentials than CO*→ HCO* and CO₂ → COOH* steps to convert into products. We developed thermodynamic volcano plots with two descriptors; the CO* and OH* binding free energies and determined the best catalyst material among the initially investigated catalyst materials expecting this plot will provide guidance to the future work on improving the activity of transition metal-p block catalysts for this important reduction reaction.

[Re(η6-arene)2]+ as a highly stable ferrocene-like scaffold for ligands and complexes

Ferrocenes are versatile ligand scaffolds, complexes of which have found numerous applications in catalysis. Structurally similar but of higher redox stabilites are sandwich complexes of the [Re(η6-arene)2]+ type. We report herein routes for conjugating potential ligands to a single or to both arenes in this scaffold. Since the arene rings can freely rotate, the [Re(η6-arene)2]+ has a high degree of structural flexibility. Polypyridyl ligands were successfully introduced. The coordination of Co(ii) to such a model tetrapyridyl-Re(i)-bis-benzene complex produced a bimetallic Re(i)-Co(ii) complex. To show the stability of the resulting architecture, a selected complex was subjected to photocatalytic reactions. It showed good activity in proton reduction over a long time and did not decompose, corroborating its extraordinary stability even under light irradiation. Its activity compares well with the parent catalyst in turn over numbers and frequencies. The supply of electrons limits catalytic turnover frequency at concentrations below ∼10 μM. We also show that other ligands can be introduced along these strategies. The great diversity offered by [Re(η6-arene)2]+ sandwich complexes from a synthetic point allows this concept to be extended to other catalytic processes, comparable to ferrocenes.

Enhanced Electrochemical CO2 Reduction by a Series of Molecular Rhenium Catalysts Decorated with Second-Sphere Hydrogen-Bond Donors

A series of rhenium(I) fac-tricarbonyl complexes containing pendent arylamine functionality in the second coordination sphere have been developed and studied as electrocatalysts for carbon dioxide (CO₂) reduction. Aniline moieties were appended at the 6 position of a 2,2'-bipyridine (bpy) donor in which the primary amine was positioned at the ortho- (1-Re), meta- (2-Re), and para- (3-Re) sites of the aniline substituent to generate a family of isomers. The relationship between the catalyst structure and activity was explored across the series, and the catalytic performance was compared to that of the benchmark catalyst Re(bpy)(CO)₃Cl (ReBpy). Catalysts 1-Re, 2-Re, and 3-Re outperform the benchmark catalyst both in anhydrous acetonitrile and with added trifluoroethanol (TFE) as an external proton source. In the presence of TFE, the aniline-substituted catalysts convert CO₂ to carbon monoxide (CO) with high Faradaic efficiencies (≥89%) and have superior turnover frequencies (TOFs) relative to ReBpy (72.9 s^-1), with 2-Re having the highest TOF of the series at 239 s^-1, a value that is twice that of the next most active catalyst. TOFs of 123 and 109 s^-1 were observed for the ortho- and para-substituted aniline complexes (1-Re and 3-Re), respectively. Indeed, catalytic activities vary widely across the series, showing a high sensitivity to the position of the amine functionality relative to the rhenium active site. IR and UV-vis spectroelectrochemical experiments were conducted on the aniline-substituted systems, revealing important differences between the catalysts and mechanistic insight.

Evaluation of Influencing Factors in Tetravalent Uranium Complex-Mediated CO2 Functionalization by Density Functional Theory

The functionalization of CO₂ mediated by a series of U(IV) mixed-sandwich compounds, (COT^TIPS2)Cp*UR (R = -CH₃, -CH₂Ph, -CH₂TMS, -CH(TMS)₂, -NHPh, -OPh, -SPh, -SePh; COT^TIPS2 = C₈H₆(SiⁱPr₃-1,4)₂; Cp* = C₅Me₅; TMS = SiMe₃), was investigated by the density functional theory method. A two-step mechanism was revealed, in which the insertion of CO₂ into the U-C bond was identified as the rate-determining step via a transition state featured by a four-membered ring with a free-energy barrier of 18.8 kcal/mol to the reaction of the (COT^TIPS2)Cp*UCH₃ system. The whole reaction was strongly exothermic by 45.0 kcal/mol. Substitution effect was discussed, including the bulkiness of the R group and the nature of the ligating atom, and steric hindrance and electrostatic interactions were found to be responsible for the observed variation in reactivity. The reactivity of U(III) and U(IV) complexes in CO₂ functionalization was also compared and discussed. The results were consistent with experimental studies and complemented with molecular level of understanding on the mechanisms of CO₂ functionalization promoted by tetravalent U complexes.

Immobilizing cobalt phthalocyanine into a porous carbonized wood membrane as a self-supported heterogenous electrode for selective and stable CO2 electroreduction in water

Immobilizing CoPc into a porous carbonized wood membrane (CoPc/CWM) leads to a self-supported heterogenous electrode for efficient CO₂ electroreduction in water.

Strategies for Bioelectrochemical CO2 Reduction

Atmospheric CO₂ is a cheap and abundant source of carbon for synthetic applications. However, the stability of CO₂ makes its conversion to other carbon compounds difficult and has prompted the extensive development of CO₂ reduction catalysts. Bioelectrocatalysts are generally more selective, highly efficient, can operate under mild conditions, and use electricity as the sole reducing agent. Improving the communication between an electrode and a bioelectrocatalyst remains a significant area of development. Through the examples of CO₂ reduction catalyzed by electroactive enzymes and whole cells, recent advancements in this area are compared and contrasted.

Molecular cobalt corrole complex for the heterogeneous electrocatalytic reduction of carbon dioxide

Electrochemical conversion of CO2 to alcohols is one of the most challenging methods of conversion and storage of electrical energy in the form of high-energy fuels. The challenge lies in the catalyst design to enable its real-life implementation. Herein, we demonstrate the synthesis and characterization of a cobalt(III) triphenylphosphine corrole complex, which contains three polyethylene glycol residues attached at the meso-phenyl groups. Electron-donation and therefore reduction of the cobalt from cobalt(III) to cobalt(I) is accompanied by removal of the axial ligand, thus resulting in a square-planar cobalt(I) complex. The cobalt(I) as an electron-rich supernucleophilic d8-configurated metal centre, where two electrons occupy and fill up the antibonding dz2 orbital. This orbital possesses high affinity towards electrophiles, allowing for such electronically configurated metals reactions with carbon dioxide. Herein, we report the potential dependent heterogeneous electroreduction of CO2 to ethanol or methanol of an immobilized cobalt A3-corrole catalyst system. In moderately acidic aqueous medium (pH = 6.0), the cobalt corrole modified carbon paper electrode exhibits a Faradaic Efficiency (FE%) of 48 % towards ethanol production.

Solvents and Supporting Electrolytes in the Electrocatalytic Reduction of CO2

Different electrolytes applied in the aqueous electrocatalytic CO₂ reduction reaction (CO₂RR) considerably influence the catalyst performance. Their concentration, species, buffer capacity, and pH value influence the local reaction conditions and impact the product distribution of the electrocatalyst. Relevant properties of prospective solvents include their basicity, CO₂ solubility, conductivity, and toxicity, which affect the CO₂RR and the applicability of the solvents. The complexity of an electrochemical system impedes the direct correlation between a single parameter and cell performance indicators such as the Faradaic efficiency; thus the effects of different electrolytes are often not fully comprehended. For an industrial application, a deeper understanding of the effects described in this review can help with the prediction of performance, as well as the development of scalable electrolyzers. In this review, the application of supporting electrolytes and different solvents in the CO₂RR reported in the literature are summarized and discussed.

CO2 capture and sequestration in stable Ca-oxalate, via Ca-ascorbate promoted green reaction

The increase in the amount of carbon dioxide (CO₂) emissions related to many anthropic activities is a persistent and growing problem. During the last years, many solutions have been set out, none of them being the ultimate one. Investigators agree on the need of a synergic approach to the problem, in terms of many complementary methods of sequestration that, combined with the reduction of production, will be able to decrease the concentration of the CO₂ in the atmosphere. In this work, we explore the use of a green reaction to trap the CO₂ into a stable crystalline phase (weddellite) resorting to a multidisciplinary approach. CO₂ is reduced and precipitated as calcium oxalate through vitamin C as a sacrificial reductant. Calcium oxalate crystals obtained show a startling good quality that increases their already great stability over a wide chemical and physical conditions' range.