Quinoacridane[4]arenes─Very Large Conformationally Restricted Macrocycles

Phenol-based macrocycles play a fundamental role in supramolecular chemistry, but their size has been rather limited. Here we report a novel class of very large, bowl-shaped macrocycles with a diameter of 21.8 Å. These quinoacridane[4]arenes are 150% larger than the current record holders, the acridane[4]arenes, and three times the size of resorcin[4]arene. We expect the quinoacridane[4]arenes to be a useful platform for the construction of molecular containers.

A Pillararene-Based Cavitand: Synthesis and Solid-State Capsular Assemblies Induced by Linear Alkanes with Specific Lengths

Herein, a novel pillararene-based cavitand with fixed planar chirality was synthesized by the SuFEx reaction. As demonstrated by single crystal X-ray analysis, host-guest capsules involving this cavitand and linear alkanes with specific lengths are observed in the solid state. The formation of each capsule is driven by hydrogen bonding interactions between a linear alkane molecule and two cavitand molecules, as well as noncovalent interactions between the two cavitand molecules in this capsule.

Pillar[5]arenes decorated with six-membered-ring aromatics at all the substitution positions

Macrocyclic molecules have characteristic properties different from linear ones, such as high symmetry and guest-inclusion ability. To bring drastic changes to these properties, direct introduction of many substituents is a challenging but effective tool. Herein, we attain direct installation of ten six-membered-ring aromatic π-units into both rims of a pillar[5]arene. In contrast to previous pillar[n]arenes with less hindered five-membered-ring units, which showed conformational complexity and crushed crystal structures, the per-phenyl-substituted pillar[5]arene has a cylinder-shaped crystal structure with a dichloromethane inside the cavity and is obtained as a single pair of D 5-symmetric enantiomers. The average dihedral angles between the core and peripheral benzene rings sharply increase from 38° to 66°. These differences indicate the importance of local steric repulsion on both rims for determining the structures and properties of macrocycles.

Host-Guest Chemistry in Binary and Ternary Complexes Utilizing π-Conjugated Carbon Nanorings

The carbon nanorings, possessing a radial π system, have garnered significant attention primarily due to their size-dependent photophysical properties and the presence of a unique curved π-conjugated cavity. This is evidenced by the rapid proliferation of publications. Furthermore, the integration of building blocks into CPP skeletons can confer [n]CPPs with novel and exceptional photophysical and electronic characteristics, as well as chiral properties and host-guest interactions, thereby augmenting the diversity of [n]CPPs. Notably, the curved π surface structures and concave cavity of carbon nanorings enable them to host aromatic or non-aromatic guests with a complementarily curved surface, resulting in interesting binary or ternary complexes. This review provides a comprehensive treatment of literature reports on binary and ternary complexes, focusing on both their host-guest interactions and properties. It is important to note that the scope of this review is limited to host-guest chemistry in binary and ternary complexes based on π-conjugated carbon nanorings.

Self-Inclusion Complexation of Electron-Accepting Guest into Electron-Donating Cyclic Host by Photoexcitation

Self-inclusion complexes consisting of host-guest conjugates are one of the unique supramolecular structures because they form in-state and out-state depending on the external stimuli. Despite many reports of the stimuli-responsive self-inclusion complex formation, study of the structural relaxation from out-state to in-state by photoexcitation has been unexplored. Herein, we report that an electron-donating host and an electron-accepting guest conjugate exhibits the structural relaxation from out-state to in-state by photoexcitation. Formation of the in-state in the excited state resulted in exciplex emission along with the locally excited emission from the out-state. Moreover, this structural relaxation by photoexcitation was suppressed not only by temperature, but also by the presence of guest molecules, resulting in changes in the ratio of the dual emission intensities.

Pillararenes: a new frontier in antimicrobial therapy

Pillararenes have gained great interest among researchers in many fields due to their symmetric structure and facile functionalization. In this review, we summarize recent progress for pillararenes as antimicrobial agents, ranging from cationic pillararenes and peptide-modified pillararenes to sugar-functionalized pillararenes. Moreover, their structure-activity relationships are presented, and their mechanisms of action are discussed. As a state-of-the-art technology, their opportunities and outlook are also outlined in this emerging field. Overall, their potent inhibitory activity and high biocompatibility give them potential for the development of novel antimicrobial agents.

Recent Progress of Supramolecular Chemotherapy Based on Host-Guest Interactions

Chemotherapy is widely recognized as an effective approach for treating cancer due to its ability to eliminate cancer cells using chemotherapeutic drugs. However, traditional chemotherapy suffers from various drawbacks, including limited solubility and stability of drugs, severe side effects, low bioavailability, drug resistance, and challenges in tracking treatment efficacy. These limitations greatly hinder its widespread clinical application. In contrast, supramolecular chemotherapy, which relies on host-guest interactions, presents a promising alternative by offering highly efficient and minimally toxic anticancer drug delivery. In this review, an overview of recent advancements in supramolecular chemotherapy based on host-guest interactions is provided. The significant role it plays in guiding cancer therapy is emphasized. Drawing on a wealth of cutting-edge research, herein, a timely and valuable resource for individuals interested in the field of supramolecular chemotherapy or cancer therapy, is presented. Furthermore, this review contributes to the progression of the field of supramolecular chemotherapy toward clinical application.

Kinetically controlled synthesis of rotaxane geometric isomers

Geometric isomerism in mechanically interlocked systems-which arises when the axle of a mechanically interlocked molecule is oriented, and the macrocyclic component is facially dissymmetric-can provide enhanced functionality for directional transport and polymerization catalysis. We now introduce a kinetically controlled strategy to control geometric isomerism in [2]rotaxanes. Our synthesis provides the major geometric isomer with high selectivity, broadening synthetic access to such interlocked structures. Starting from a readily accessible [2]rotaxane with a symmetrical axle, one of the two stoppers is activated selectively for stopper exchange by the substituents on the ring component. High selectivities are achieved in these reactions, based on coupling the selective formation reactions leading to the major products with inversely selective depletion reactions for the minor products. Specifically, in our reaction system, the desired (major) product forms faster in the first step, while the undesired (minor) product subsequently reacts away faster in the second step. Quantitative 1H NMR data, fit to a detailed kinetic model, demonstrates that this effect (which is conceptually closely related to minor enantiomer recycling and related processes) can significantly improve the intrinsic selectivity of the reactions. Our results serve as proof of principle for how multiple selective reaction steps can work together to enhance the stereoselectivity of synthetic processes forming complex mechanically interlocked molecules.

A Nanoplatform Based on Pillar[5]arene Nanovalves for Combined Drug Delivery and Enhanced Antitumor Activity

Modern nanodrug delivery technologies offer new approaches in the fight against cancer. However, due to the heterogeneity of tumors and side effects of anticancer drugs, monotherapies are less effective. Herein, we report a novel pH and light dual-responsive nanodrug delivery platform. The platform was formed by sulfonate-modified gold nanoparticles loaded with the anticancer drugs doxorubicin (DOX) and glucose oxidase (GOx) and then covered by water-soluble pillar[5]arene as a nanovalve. The nanovalve formed by the host-guest interaction between pillar[5]arene and the sulfonic acid group grafted onto the gold nanoparticle increased the drug loading capacity of the nanoplatform and enabled sustained release of the drug in a simulated weakly acidic tumor environment. The released GOx can consume intracellular glucose, namely, starvation therapy, while the generated hydrogen peroxide can further kill tumor cells, complementing DOX chemotherapy. Gold nanoparticles have good photothermal conversion ability and can enhance the drugs release rate under specific wavelengths of light irradiation. The results of in vitro and in vivo experiments showed that this novel nanodrug delivery platform has good biocompatibility and better therapeutic efficacy relative to monotherapy. This study successfully developed a combined chemo/starvation therapy strategy with good tumor suppression, providing a new approach for cancer treatment.

Silapillar[n]arenes: Their Enhanced Electronic Conjugation and Conformational Versatility

During recent decades, methylene-bridged macrocyclic arenes have been widely used in supramolecular chemistry. However, their π-conjugations are very weak, as the methylene bridges disrupt the electronic communication between π orbitals of the aromatic units. Herein, we successfully synthesized a series of silapillar[n]arenes (n = 4, 6, and 8) using silylene bridging. These showed enhanced electronic conjugation compared with the parent pillar[n]arenes because of σ*-π* conjugation between σ* (Si-C) orbitals and π* orbitals of the benzenes. Owing to the longer Si-C bond compared with the C-C bond, silylene-bridging provides additional structural flexibility into the pillar[n]arene scaffolds; a strained silapillar[4]arene was formed, which is unavailable in the parent pillar[n]arenes because of the steric requirements. Furthermore, silapillar[n]arenes displayed interesting size-dependent structural and optical properties.

New Cyanostyrylcopillar[5]arene Derivative: Synthesis, Photophysical Study, Chromogenic Detection of Aliphatic Amines, and Biofilm-Antibiofilm Activity

The synthesis, characterization, and application of a new cyanostyrylcopillar[5]arene 1 is reported. Single-crystal X-ray diffraction and other spectroscopic techniques confirm the identity of the new copillar 1. The X-ray diffraction study reveals that the copillar 1 exhibits a 1D supramolecular chain in the solid state involving π···π interactions along the crystallographic c-axis and 1D chains are further connected by interchain C-H···π interactions to establish 2D supramolecular layers within the crystallographic bc-plane. 2D supramolecular chains on further packing introduce a 3D structure with void spaces filled with hexane molecules. Through minimal deviation in the dihedral angle, the cyano-substituted ethylenic group in 1 shows a conjugation with the phenolic -OH, favoring intramolecular bond conjugation (ITBC) and colorimetrically detects the aliphatic amines over aromatic amines in CH3CN. Among the aliphatic amines, tertiary amines are differentiated from primary and secondary amines by the naked eye through color change. Both in solution and solid states, 1 displays vapor phase detection of volatile aliphatic amines. Antibacterial activity analysis shows that while 1 exhibits the antibiofilm action against Gram-positive pathogenic bacteria, Staphylococcus aureus, it promotes biofilm formation by Gram-negative pathogenic bacteria, Pseudomonas aeruginosa.

Highly selective Cu2+ detection with a naphthalimide-functionalised pillar[5]arene fluorescent chemosensor

Ligand 1, a rim-differentiated pillar[5]arene macrocycle modified with five naphthalimide groups through click chemistry, serves as an effective ratiometric fluorescent chemosensor for Cu2+. In contrast to the monomeric naphthalimide control compound 2, which shows only monomer emission, ligand 1 demonstrates dual emission characteristics encompassing both the monomer and excimer of the naphthalimide moieties. The binding properties of ligand 1 toward 15 different metal ions were systematically investigated in CH2Cl2/CH3CN (v/v, 1 : 1) by UV-vis and fluorescence spectroscopy. Remarkably, ligand 1 exhibits exceptional selectivity for Cu2+ ions. Upon complexation with Cu2+, the excimer emission of ligand 1 diminishes, concomitant with an enhancement of its monomer emission. The binding ratio for 1·Cu2+ was determined to be 1 : 1, with an association constant of (3.39 ± 0.40) × 105 M-1 calculated using a nonlinear least-squares curve-fitting method. Furthermore, the limit of detection (LOD) was found to be 185 ± 7 nM. Our results from 1H NMR titration, high-resolution mass spectrometry analysis and density functional theory calculations of 1·Cu2+ suggest synergistic coordination between Cu2+ and the triazole groups on ligand 1.

Water-soluble organic macrocycles based on dye chromophores and their applications

Traditional water-soluble organic macrocyclic receptors generally lack photofunctionality, thus monitoring the drug delivery and the phototheranostic applications of these host-guest macrocyclic systems has been greatly restricted. To address this issue, incorporating π-conjugated dye chromophores as building blocks into macrocyclic molecules is a straightforward and promising strategy. This approach not only imparts intrinsic optical features to the macrocycles themselves but also enhances the host-guest binding ability due to the large planar structures of the dyes. In this feature article, we focus on recent advances in water-soluble macrocyclic compounds based on organic dye chromophores, such as naphthalimide (NDI), perylene diimides (PDI), azobenzene (azo), tetraphenylethylene (TPE) and anthracene, and provide an overview of their various applications including molecular recognition, drug release, biological imaging, photothermal therapy, etc. We hope that this article could be helpful and instructive for the design of water-soluble dye-based macrocycles and the further development of their biomedical applications, particularly in combination with drug therapy and phototheranostics.

Silver and Gold Pillarplex Pseudorotaxanes from α,ω-Dicarboxylic Acids

A series of pseudorotaxanes with supramolecular organometallic silver(I) and gold(I) pillarplexes acting as rings and different α,ω-dicarboxylic acids as axle components are reported. The successful formation of the host-guest complexes is shown by 1 H NMR spectroscopy and respective NMR titration. Additional evaluation with ITC titration experiments yielded dissociation constants (Kd ) ranging from 10-5 to 10-7  M. Single-crystal X-Ray diffraction analysis reveals a particularly exciting pore alignment of different examples in the solid state depending on the length of the guest. The work highlights, that dicarboxylic acids can penetrate the tight tubular pillarplex pore, paving the way to future mechanically interlocked molecules and materials.

Efficient manipulation of Förster resonance energy transfer through host-guest interaction enables tunable white-light emission and devices in heterotopic bisnanohoops

In this study, we synthesized and reported the heterotopic bisnanohoops P5-[8,10]CPPs containing cycloparaphenylenes (CPPs) and a pillar[5]arene unit, which act not only as energy donors but also as a host for binding energy acceptors. We demonstrated that a series of elegant FRET systems could be constructed successfully through self-assembly between donors P5-[8,10]CPPs and acceptors with different emissions via host-guest interaction. These FRET systems further allow us to finely adjust the donors P5-[8,10]CPPs and acceptors (BODIPY-Br and Rh-Br) for achieving multiple color-tunable emissions, particularly white-light emission. More importantly, these host-guest complexes were successfully utilized in the fabrication of white-light fluorescent films and further integrated with a 365 nm LED lamp to create white LED devices. The findings highlight a new application of carbon nanorings in white-light emission materials, beyond the common recognition of π-conjugated molecules.

Potential of nonporous adaptive crystals for hydrocarbon separation

Hydrocarbon separation is an important process in the field of petrochemical industry, which provides a variety of raw materials for industrial production and a strong support for the development of national economy. However, traditional separation processes involve huge energy consumption. Adsorptive separation based on nonporous adaptive crystal (NAC) materials is considered as an attractive green alternative to traditional energy-intensive separation technologies due to its advantages of low energy consumption, high chemical and thermal stability, excellent selective adsorption and separation performance, and outstanding recyclability. Considering the exceptional potential of NAC materials for hydrocarbon separation, this review comprehensively summarizes recent advances in various supramolecular host-based NACs. Moreover, the current challenges and future directions are illustrated in detail. It is expected that this review will provide useful and timely references for researchers in this area. Based on a large number of state-of-the-art studies, the review will definitely advance the development of NAC materials for hydrocarbon separation and stimulate more interesting studies in related fields.

Diastereoselective Rotaxane Synthesis with Pillar[5]arenes via Co-crystallization and Solid-State Mechanochemical Processes

Chiral rotaxanes have attracted much attention in recent decades for their unique chirality based on their interlocked structures. Thus, selective synthesis methods of chiral rotaxanes have been developed. The introduction of substituents with chiral centers to produce diastereomers is a powerful strategy for the construction of chiral rotaxanes. However, in case of a small energy difference between the diastereomers, diastereoselective synthesis is extremely difficult. Herein, we report a new diastereoselective rotaxane synthesis method using solid-phase diastereoselective [3]pseudorotaxane formation and mechanochemical solid-phase end-capping reactions of the [3]pseudorotaxanes. By co-crystallization of stereodynamic planar chiral pillar[5]arene with stereogenic carbons at both rims and axles with suitable end groups and lengths, the [3]pseudorotaxane with a high diastereomeric excess (ca. 92% de) was generated in the solid state because of higher effective molarity with aid by packing effects and significant energy differences between [3]pseudorotaxane diastereomers. In contrast, the de of the pillar[5]arene was low in solution (ca. 10% de) because of a small energy difference between diastereomers. Subsequent end-capping reactions of the polycrystalline [3]pseudorotaxane with high de in solvent-free conditions successfully yielded rotaxanes while maintaining the high de generated by the co-crystallization.

Synthesis of porous dimethoxypillar[5]arene knitted β-cyclodextrin copolymers for efficient adsorption of organic micropollutants

Herein, through knitting benzylated β-cyclodextrin (BnCD) by dimethoxypillar[5]arene (P[5]), porous copolymers (P[5]-BnCDs) containing two kinds of macrocycles were synthesized with yields not <97 %. The molar ratio of P[5]/BnCD greatly influenced the P[5]-BnCDs' porosity and adsorption performance. When the molar ratio of P[5]/BnCD was 4/1, the P[5]-BnCD (4-1), demonstrated a surface area up to 515.95 m²/g and showed fast adsorption kinetic, high adsorption capacity and good reusability towards the model organic micropollutants (OMPs). The adsorption fitted well with the pseudo-second-order and the Langmuir models, while the thermodynamic studies revealed spontaneous physisorption process. The adsorption mechanism was dominant by host-guest and hydrophobic interactions and the adsorption at environmentally relevant concentrations experiments showed the practicality and superiority in extraction of the OMPs at μg/L level. This study paves a way for the development of versatile porous organic polymers with multiple macrocycles for efficient removal of OMPs from water.

Impacts of potential anticancer agents based on pillar[5]arene for head and neck squamous cell carcinoma cells

PURPOSE

This study was conducted to investigate impacts of potential anticancer (associated with apoptosis and caspase pathways) of two newly synthesized derivatives of pillar[5]arene, named as d-Q-P5 and p-Q-P5, on Squamous cell carcinomas of the head and neck (HNSCC) cells.

MATERIALS AND METHODS

The MTT method was used to determine the IC₅₀ doses of the derivatives on HNSCC cells, and the changes in gene expression were analyzed by real-time polymerase chain reaction (qPCR). The apoptosis change was confirmed by flow cytometry analysis.

RESULTS

The results showed that the d-Q-P5 and p-Q-P5 effectively inhibited the proliferation of the cells by upregulating proapoptotic genes (Bax, Bad, p53, Bak, and Apaf-1) and genes involved in the caspase pathway (Casp2, Casp3, and Casp9), while downregulating the antiapoptotic gene (Bcl-2).

CONCLUSIONS

This study is the first to demonstrate the potential anticancer effects of these two agents on HNSCC cells by positively regulating apoptosis gene expression.

Decasubstituted Pillar[5]arene Derivatives Containing L-Tryptophan and L-Phenylalanine Residues: Non-Covalent Binding and Release of Fluorescein from Nanoparticles

Sensitive systems with controlled release of drugs or diagnostic markers are attractive for solving the problems of biomedicine and antitumor therapy. In this study, new decasubstituted pillar[5]arene derivatives containing L-Tryptophan and L-Phenylalanine residues have been synthesized as pH-responsive drug nanocarriers. Fluorescein dye (Fluo) was loaded into the pillar[5]arene associates and used as a spectroscopic probe to evaluate the release in buffered solutions with pH 4.5, 7.4, and 9.2. The nature of the substituents in the pillar[5]arene structure has a huge influence on the rate of delivering. When the dye was loaded into the associates based on pillar[5]arene derivatives containing L-Tryptophan, the Fluo release occurs in the neutral (pH = 7.4) and alkaline (pH = 9.2) buffered solutions. When the dye was loaded into the associates based on pillar[5]arene with L-Phenylalanine fragments, the absence of release was observed in every pH evaluated. This happens as the result of different packing of the dye in the structure of the associate. This fact was confirmed by different fluorescence mechanisms (aggregation-caused quenching and aggregation-induced emission) and association constants. It was shown that the macrocycle with L-Phenylalanine fragments binds the dye more efficiently (lgK_a = 3.92). The experimental results indicate that the pillar[5]arene derivatives with amino acids fragments have a high potential to be used as a pH-responsive drug delivery devices, especially for promoting the intracellular delivering, due to its nanometric size.

Per-Arylation of Pillar[n]arenes: An Effective Tool to Modify the Properties of Macrocycles

Installation of various substituents is a reliable and versatile way to alter the properties of macrocyclic molecules, but high-yield and controlled methods are not always available especially for multifold reactions. Herein, we report 10- and 12-fold introduction of aryl substituents onto both rims of cylinder-shaped pillar[n]arenes, which usually have alkoxy substituents slanting to the cylinder axes. Although alkoxy pillar[5]arenes exist as D₅-symmetric enantiomeric pairs, arylated pillar[5]arenes provide crushed single-crystal structures and stereoisomerism including C₂-symmetric conformations depending on the aryl groups. Pillar[n]arenes with 2-benzofuranyl groups display bright fluorescence with quantum yields of 88-90% and no host-guest complexation with electron-deficient molecules in solution due to large deviation from alkoxy compounds. A benzofuran-appended pillar[6]arene instead captures small gaseous molecules in the solid state, probably owing to outside spaces surrounded by aromatic rings.

Pillar[n]arene-calix[m]arene hybrid macrocyclic structures

To reserve planar chirality, enhance molecular recognition, and build advanced self-assemblies, hybrid macrocyclic hosts containing rigid pillar[n]arene and flexible calix[m]arene were designed, prepared and investigated for interesting applications. This review summarizes and discusses different synthetic strategies for constructing hybrid macrocyclic structures. Pillar[n]arene dimer with rigid aromatic double bridges provided the possibility of introducing calix[m]arene cavities, where the planar chirality was reserved in the structure of pillararene. The capacity for molecular recognition was enhanced by hybrid macrocyclic cavities. Interestingly, the obtained pillar[n]arene-calix[m]arene could self-assemble into "channels" and "honeycomb" in both the solid state and solution phase as well as donate the molecular architecture as the wheel for the formation of mechanically interlocked molecules, such as rotaxane. In addition, the pillar[n]arene and calix[m]arene could also be coupled together to produce pillar[n]arene embeded 1,3-alternate and cone conformational calix[m]arene derivatives, which could catalyze the oxidative polymerization of aniline in aqueous solutions. Except for building hybrid cyclophanes by covalent bonds, weak supramolecular interactions were used to prepare pillar[n]arene-calix[m]arene analogous composites with other pillar-like pillar[n]pyridiniums and calix-like calix[m]pyrroles, exhibiting reasonable performances in enhancing molecular recognition and trapping solvent molecules.

Pillar[n]arene-Mimicking/Assisted/Participated Carbon Nanotube Materials

The recent progress in pillar[n]arene-assisted/participated carbon nanotube hybrid materials were initially summarized and discussed. The molecular structure of pillar[n]arene could serve different roles in the fabrication of attractive carbon nanotube-based materials. Firstly, pillar[n]arene has the ability to provide the structural basis for enlarging the cylindrical pillar-like architecture by forming one-dimensional, rigid, tubular, oligomeric/polymeric structures with aromatic moieties as the linker, or forming spatially "closed", channel-like, flexible structures by perfunctionalizing with peptides and with intramolecular hydrogen bonding. Interestingly, such pillar[n]arene-based carbon nanotube-resembling structures were used as porous materials for the adsorption and separation of gas and toxic pollutants, as well as for artificial water channels and membranes. In addition to the art of organic synthesis, self-assembly based on pillar[n]arene, such as self-assembled amphiphilic molecules, is also used to promote and control the dispersion behavior of carbon nanotubes in solution. Furthermore, functionalized pillar[n]arene derivatives integrated carbon nanotubes to prepare advanced hybrid materials through supramolecular interactions, which could also incorporate various compositions such as Ag and Au nanoparticles for catalysis and sensing.

Copillar[5]arene Chemistry: Synthesis and Applications

Research on pillar[n]arenes has witnessed a very quick expansion. This emerging class of functionalized macrocyclic oligoarenes not only offers host–guest properties due to the presence of the central cavity, but also presents a wide variety of covalent functionalization possibilities. This short review focuses on copillararenes, a subfamily of pillar[n]arenes. In copillararenes, at least one of the hydroquinone units bears different functional groups compared to the others. After having defined the particular features of copillararenes, this short review compares the different synthetic strategies allowing their construction. Some key applications and future perspectives are also described.

1 Introduction

2 General Features of Pillar[5]arenes

3 Synthesis of Functionalized Copillar[4+1]arenes

4 Concluding Remarks

Tetraphenylethylene-embedded [15]paracyclophanes: AIEgen and macrocycle merged novel supramolecular hosts used for sensing Ni2+ ions

Transformation of [1₅]paracyclophanes ([15]PCP) into fluorophores has been achieved by embedding tetraphenylethene (TPE) units into their skeletons at the meso-positions. The obtained two hosts demonstrated distinct aggregation-induced emission (AIE) properties and their fluorescence could be selectively quenched by Ni²⁺ ions.

ortho-Functionalization of Pillar[5]arene: An Approach to Mono-ortho-Alkyl/Aryl-Substituted A1/A2-Dihydroxypillar[5]arene

Despite the fact that the rim and lateral functionalizations of pillar[n]arenes have been well explored, ortho-functionalization has rarely been realized. In this work, we report a facile method of introducing a single functionality ortho to the hydroxyl group in A1/A2-dihydroxypillar[5]arene via a Grignard addition to pillar[4]arene[1]quinone followed by a dienone-phenol rearrangement. The described ortho-alkylation/arylation method allowed formation of various mono ortho-alkyl/aryl-substituted A1/A2-dihydroxypillar[5]arenes previously difficult to obtain.

Simultaneous Organic and Inorganic Host‐Guest Chemistry within Pillararene‐Protein Cage Frameworks

Supramolecular self‐assembly of biomolecules provides a powerful bottom‐up strategy to build functional nanostructures and materials. Among the different biomacromolecules, protein cages offer various advantages including uniform size, versatility, multi‐modularity, and high stability. Additionally, protein cage crystals present confined microenvironments with well‐defined dimensions. On the other hand, molecular hosts, such as cyclophanes, possess a defined cavity size and selective recognition of guest molecules. However, the successful combination of macrocycles and protein cages to achieve functional co‐crystals has remained limited. In this study, we demonstrate electrostatic binding between cationic pillar[5]arenes and (apo)ferritin cages that results in porous and crystalline frameworks. The electrostatically assembled crystals present a face‐centered cubic (FCC) lattice and have been characterized by means of small‐angle X‐ray scattering and cryo‐TEM. These hierarchical structures result in a multiadsorbent framework capable of hosting both organic and inorganic pollutants, such as dyes and toxic metals, with potential application in water‐remediation technologies.

Host–guest sensing towards sodium cyclamate based on a cationic pillar[6]arene reduced graphene nano-composite

A competitive fluorescence sensing for the detection of sodium cyclamate based on a cationic water-soluble pillar[6]arene graphene nano-composite.

Water-soluble pillar[5]arene-modified graphdiyne functional material and its application towards ultrasensitive and robust electrochemical methylamphetamine determination

Schematic illustration of the application of the novel material WP5–GDY/GCE for the electrochemical sensing of methylamphetamine (MA).

Proton Transfer Mediated Recognition of Amines by Ionizable Macrocyclic Receptors

Ammonium ion/carboxylate ion pairing is a key interaction ubiquitous in biological systems, but amine recognition by ionizable molecular receptors, mediated by host-to-guest proton transfer, has too often been overlooked as...

Fine-Tuning Macrocycle Cavity to Selectively Bind Guests in Water for Near-Infrared Photothermal Conversion

The rational and specific synthesis of the required organic macrocycles to bind the size-matched targeted guests without undesired macrocyclic byproducts remains a great challenge. Herein, based on a new naphthalimide...

Synthesis of a novel aminobenzene-containing hemicucurbituril and its fluorescence spectral properties with ions

A novel hemicucurbituril-based macrocycle, alternately consisting of amidobenzene and 2-imidazolidione moieties was designed and synthesized. Based on the fragment coupling strategy, nitrobenzene-containing hemicucurbituril was firstly prepared facilely under alkaline environment, and reduction of the nitro groups produced the desired amidobenzene-containing hemicucurbituril. As an original fluorescent chemosensor, it exhibited strong interactions with Fe³⁺ over other metal cations. The experimental evidence of fluorescence spectra suggested that a 1:1 complex was formed between this macrocycle and Fe³⁺ with an association constant up to (2.1 ± 0.3) × 10⁴ M⁻¹. Meanwhile, this macrocycle showed no obvious or only slight enhancement of the fluorescence intensity with selected anions.

Planar Chirality: A mine for catalysis and structure discovery

Planar chirality is one of the most fascinating expressions of chirality, exploited by Nature to lock three-dimensional chiral conformations and, more recently, by chemists to create new chiral reagents, catalysts and functional organic materials. Nevertheless, the shortage of protocols able to induce and secure asymmetry during the generation of these unique chiral entities has dissuaded chemists to exploit their structural properties. This Minireview intends to illustrate the limited but remarkable catalytic methodologies reported for the production of planar chirality in strained molecules and serve as source of inspiration for the development of new unconventional protocols that are expected to come in the near future.

On iodido bismuthates, bismuth complexes and polyiodides with bismuth in the system BiI3/18-crown-6/I2

The iodido bismuthates [Bi(18-crown-6)I2][BiI4] (1) and [Bi(18-crown-6)I2][Bi3I10] (2), the neutral complex [Bi(C6H14O4)I3](18-crown-6) (3) as well as the polyiodides [Bi(18-crown-6)I2][I5](18-crown-6) (4), [Bi(18-crown-6)I2]2[I14] (5) and [Bi(18-crown-6)I2]2[I19] (6) were prepared by reaction of BiI3, 18-crown-6, and I2 at T = 60–120 °C. The compounds 1–5 were prepared in [n-Bu3MeN][N(Tf)2] as an ionic liquid ([n-Bu3MeN]: tributylmethylammonium, [N(Tf)2]: bis(trifluoromethylsulfonyl)imide), whereas 6 was obtained only by direct reaction of the starting materials. The title compounds exhibit two different constitutions of the [Bi(18-crown-6)I2]+ cation as well as a non-charged, molecular [Bi(C6H14O4)I3] unit with a triethylene glycol ligand generated in situ by cleavage of the crown ether. Infinite chain-like [ BiI 2 / 1 I 4 / 2 ] − ∞ 1 ${}_{\infty }{}^{1}\left[{{\text{BiI}}_{2/1}{\text{I}}_{4/2}\right]}^{-}$ and [ Bi 6 I 18 / 1 I 4 / 2 ∞ 1 ] − ${{}_{\infty }{}^{1}\left[{\text{Bi}}_{6}{\text{I}}_{18/1}{\text{I}}_{4/2}\right]}^{-}$ anions occur in 1 and 2, whereas various polyiodide anions (e.g. [I3]−, [I5]−, [I7]−, [I9]−) with partly complex interaction are observed in 4, 5, and 6. The title compounds were characterized by single-crystal X-ray diffraction analysis and infrared spectroscopy. In the case of 1 and 2, the optical band gap was determined to be E g  = 1.91 and 1.62 eV, respectively. Especially, the ionic-liquid-based synthesis affords the different metastable compounds with variable composition and structure in a narrow temperature range.

Tetraphenylethene-Embedded Pillar[5]arene and [15]Paracyclophane: Distorted Cavities and Host-Guest Binding Properties

Two aggregation-induced emission (AIE) macrocycles (DMP[5]-TPE and PCP[5]-TPE) were prepared by embedding Tetraphenylethene (TPE) unit into the skeletons of Dimethoxypillar[5]arene (DMP[5]) and [15]Paracyclophane ([15]PCP) at meso position, respectively. In crystal, the PCP[5]-TPE showed a distorted cavity, and the incubation of hexane inside the DMP[5]-TPE cavity caused a distinct change in the molecular conformation compared to PCP[5]-TPE. There was no complexation between PCP[5]-TPE and 1,4-dicyanobutane (DCB). UV absorption experiments showed the distorted cavity of DMP[5]-TPE hindered association with DCB.

Pillar[5]arene-Based Dual Chiral Organoboranes with Allowed Host-Guest Chemistry and Circularly Polarized Luminescence

We first describe two examples of highly luminescent organoboranes (NP5BN1 and NP5BN2) with dual chirality that were achieved by molecular functionalization of planar chiral pillar[5]arenes with naphthyls. Sufficiently strong steric effects are imposed by triarylamine (Ar₃N) and triarylborane (Ar₃B) moieties and further enhanced by the proximity of the chiral building blocks, leading to the isolation of multiple enantiomers via chiral high-performance liquid chromatography. The intramolecular charge transfer from N-donor to B-acceptor across both chiral subunits enabled the circularly polarized luminescence and thermally robust colorimetric responses in their emissions. Furthermore, their remarkable host-guest chemistry was allowed at no expense in the pursuit of advanced chiroptical properties using pillar[5]arene-based supramolecular scaffolds.

Supramolecular tuning of thioflavin-T aggregation hosted by polystyrene sulfonate

Tunable and controllable emission is an extremely desirable feature for advanced functional materials that finds usage in optoelectronic utilization, fluorescence probing/sensing, drug-delivery monitoring, etc. In the present contribution, we have employed a macrocyclic host molecule, sulfobutyl ether-β-cyclodextrin (SBE-β-CD), as a tuning agent for an intensely emissive aggregate assembly of a molecular rotor dye, thioflavin-T (ThT), in the presence of an anionic polyelectrolyte, polystyrene sulfonate (PSS). The macrocyclic host breaks the PSS templated ThT aggregates and leads to encapsulation of released ThT molecules, tailoring the emission response of the system in terms of intensity and wavelength. Utilizing the established selectivity of the cyclodextrin-adamantane system, reverse control of this tunable emission has been further achieved. The controllable fluorescence system has been extensively investigated using ground-state absorption, steady-state and time-resolved emission spectroscopy. This kind of supramolecular tailoring of self-assembled aggregate emission has enormous potential in the field of fluorescence sensors and probes, and imaging and tracking in biological systems.

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells

Multi-branched molecules have recently demonstrated interesting behaviour as charge-transporting materials within the fields of perovskite solar cells (PSCs). For this reason, extended triarylamine dendrons have been grafted onto a pillar[5]arene core to generate dendrimer-like compounds, which have been used as hole-transporting materials (HTMs) for PSCs. The performances of the solar cells containing these novel compounds have been extensively investigated. Interestingly, a positive dendritic effect has been evidenced as the hole transporting properties are improved when going from the first to the second-generation compound. The stability of the devices based on the best performing pillar[5]arene material has been also evaluated in a high-throughput ageing setup for 500 h at high temperature. When compared to reference devices prepared from spiro-OMeTAD, the behaviour is similar. An analysis of the economic advantages arising from the use of the pillar[5]arene-based material revealed however that our pillar[5]arene-based material is cheaper than the reference.

Supramolecular Control on the Optical Properties of a Dye-Polyelectrolyte Assembly

Control of fluorescent molecular assemblies is an exciting area of research with large potential for various important applications, such as, fluorescence sensing/probing, cell imaging and monitoring drug-delivery. In the present contribution, we have demonstrated control on the extent of aggregation of a dye-polyelectrolyte assembly using a macrocyclic host molecule, sulfobutylether-β-cyclodextrin (SBE-β-CD). Initially, a cationic molecular rotor based organic dye, Auramine-O (AuO), undergoes aggregation in the presence of an anionic polyelectrolyte, polystyrene sulfonate (PSS), and displays a broad intense new emission band along with large variation in its absorption features and excited-state lifetime. A manipulation of the monomer-aggregate equilibrium of the dye-polyelectrolyte assembly has been achieved by introducing a cyclodextrin based supramolecular host, SBE-β-CD, which leads to relocation of AuO molecules from polyelectrolyte (PSS) to supramolecular host cavity, owing to the formation of a host-guest complex between AuO and SBE-β-CD. A reversible control on this manipulation of monomer-aggregate equilibrium is further achieved by introducing a competitive guest for the host cavity i. e., 1-Adamantanol. Thus, we have demonstrated an interesting control on the dye-polyelectrolyte aggregate assembly using a supramolecular host molecule which open up exciting possibilities to construct responsive materials using a repertoire of various host-specific guest molecules.