Observing multi-frequency structured illumination patterns based on an evanescent field in a millimeter-scale polymer slide

Millimeter-scale slide optical waveguides (OWGs) show the potential to break the barrier of easy-to-use and versatility for total internal reflection (TIR) fluorescence technology. In this paper, multi-frequency structured illumination (SI) patterns resulting from the evanescent field (EF) on the surface of a millimeter-scale polymer slide OWG are observed by measuring the fluorescence intensity distribution of fluorescent dyes deposited on the top of the OWG. The frequency, intensity, and stability of the SI patterns show a strong dependence on the coupling angle of the incident light (changing with the incident position). The distribution of multi-frequency SI patterns in the frequency space is demonstrated for different numerical aperture (NA) imaging systems (NA = 0.3, 0.6, and 0.8), indicating the potential for enhanced resolution for low NA systems with a simple and cheap polymer slide.

Assessment of carvacrol-antibiotic combinations' antimicrobial activity against methicillin-resistant Staphylococcus aureus

Introduction

This study aimed to assess the antimicrobial activity of carvacrol in combination with approved antibiotics against methicillin-resistant Staphylococcus aureus (MRSA). Carvacrol, a phenolic monoterpenoid component of essential oils, has demonstrated antimicrobial properties against gram positive and gram negative bacteria. The study evaluated the antimicrobial effects of carvacrol combined with sulfamethoxazole, linezolid, minocycline, and trimethoprim.

Methods

The MRSA strain (ATCC-33591) was used, and various assays, including MIC determination, checkerboard assay, and microdilution assay were conducted.

Results

The results showed that the combination of carvacrol with antibiotics yielded better outcomes compared to monotherapy, leading to reduced bacterial colonization. Carvacrol, sulfamethoxazole, and trimethoprim exhibited weak anti-staphylococcal effects, while linezolid and minocycline demonstrated stronger effects. This suggests that conventional antibiotic therapy may not be sufficient to effectively treat MRSA infections, potentially causing delays in healing or an exacerbation of the condition. Carvacrol combinations with two antibiotics displayed superior results compared to other pairs, indicating synergistic or additive effects of carvacrol with linezolid, minocycline, and sulfamethoxazole.

Conclusion

These findings propose a new approach for developing drug molecules for MRSA treatment which combine volatile oils with available regimens. Further studies are recommended to evaluate the efficacy and biosafety of these combinations using in vivo or ex vivo models, aiming to minimize side effects and facilitate human trials. This study provides valuable insights into the potential use of carvacrol-antibiotic combinations as a novel therapeutic approach against MRSA.

High Sensitivity Extended Nano-Coulter Counter for Detection of Viral Particles and Extracellular Vesicles

We present a chip-based extended nano-Coulter counter (XnCC) that can detect nanoparticles affinity-selected from biological samples with low concentration limit-of-detection that surpasses existing resistive pulse sensors by 2-3 orders of magnitude. The XnCC was engineered to contain 5 in-plane pores each with an effective diameter of 350 nm placed in parallel and can provide high detection efficiency for single particles translocating both hydrodynamically and electrokinetically through these pores. The XnCC was fabricated in cyclic olefin polymer (COP) via nanoinjection molding to allow for high-scale production. The concentration limit-of-detection of the XnCC was 5.5 × 103 particles/mL, which was a 1,100-fold improvement compared to a single in-plane pore device. The application examples of the XnCC included counting affinity selected SARS-CoV-2 viral particles from saliva samples using an aptamer and pillared microchip; the selection/XnCC assay could distinguish the COVID-19(+) saliva samples from those that were COVID-19(-). In the second example, ovarian cancer extracellular vesicles (EVs) were affinity selected using a pillared chip modified with a MUC16 monoclonal antibody. The affinity selection chip coupled with the XnCC was successful in discriminating between patients with high grade serous ovarian cancer and healthy donors using blood plasma as the input sample.

Development of a new multiplex real-time PCR assay for rapid screening of hospital-acquired infection agents

AIMS

A new multiplex real-time PCR (qPCR) assay was developed to detect antibiotic-resistant hospital-acquired infectious agents in nasal and rectal swab samples in 1.5 h without the need for nucleic acid extraction.

METHODS

Spiked negative clinical specimens were used for the analytical performance evaluation. Double-blind samples were collected from 1788 patients to assess the relative clinical performance of the qPCR assay to the conventional culture-based methods. Bio-Speedy® Fast Lysis Buffer (FLB) and 2× qPCR-Mix for hydrolysis probes (Bioeksen R&D Technologies, Istanbul, Turkey) and LightCycler® 96 Instrument (Roche Inc., Branchburg, NJ, USA) were used for all molecular analyses. The samples were transferred into 400 L FLB, homogenized and immediately used in qPCRs. The target DNA regions are vanA and vanB genes for vancomycin-resistant Enterococcus (VRE); bla_KPC, bla_NDM, bla_VIM, bla_IMP, bla_OXA-23, bla_OXA-48, bla_OXA-58 genes for carbapenem-resistant Enterobacteriaceae (CRE); and mecA, mecC and spa for methicillin-resistant Staphylococcus aureus (MRSA).

RESULTS

No qPCR tests produced positive results for the samples spiked with the potential cross-reacting organisms. The limit of detection (LOD) of the assay for all targets was 100 colony-forming unit (cfu)/swab-sample. Results of the repeatability studies in two different centers were in 96%-100% (69/72-72/72) agreement. The relative specificity and sensitivity of the qPCR assay were respectively 96.8% and 98.8% for VRE; 94.9% and 95.1% for CRE; 99.9% and 97.1% for MRSA.

CONCLUSIONS

The developed qPCR assay can screen antibiotic-resistant hospital-acquired infectious agents in infected/colonized patients with an equal clinical performance to the culture-based methods.

In-plane Extended Nano-coulter Counter (XnCC) for the Label-free Electrical Detection of Biological Particles

We report an in-plane extended nanopore Coulter counter (XnCC) chip fabricated in a thermoplastic via imprinting. The fabrication of the sensor utilized both photolithography and focused ion beam milling to make the microfluidic network and the in-plane pore sensor, respectively, in Si from which UV resin stamps were generated followed by thermal imprinting to produce the final device in the appropriate plastic (cyclic olefin polymer, COP). As an example of the utility of this in-plane extended nanopore sensor, we enumerated SARS-CoV-2 viral particles (VPs) affinity-selected from saliva and extracellular vesicles (EVs) affinity-selected from plasma samples secured from mouse models exposed to different ionizing radiation doses.

Advances in Nucleic Acid Amplification-Based Microfluidic Devices for Clinical Microbial Detection

Accurate and timely detection of infectious pathogens is urgently needed for disease treatment and control of possible outbreaks worldwide. Conventional methods for pathogen detection are usually time-consuming and labor-intensive. Novel strategies for the identification of pathogenic nucleic acids are necessary for practical application. The advent of microfluidic technology and microfluidic devices has offered advanced and miniaturized tools to rapidly screen microorganisms, improving many drawbacks of conventional nucleic acid amplification-based methods. In this review, we summarize advances in the microfluidic approach to detect pathogens based on nucleic acid amplification. We survey microfluidic platforms performing two major types of nucleic acid amplification strategies, namely, polymerase chain reaction (PCR) and isothermal nucleic acid amplification. We also provide an overview of nucleic acid amplification-based platforms including studies and commercialized products for SARS-CoV-2 detection. Technologically, we focus on the design of the microfluidic devices, the selected methods for sample preparation, nucleic acid amplification techniques, and endpoint analysis. We also compare features such as analysis time, sensitivity, and specificity of different platforms. The first section of the review discusses methods used in microfluidic devices for upstream clinical sample preparation. The second section covers the design, operation, and applications of PCR-based microfluidic devices. The third section reviews two common types of isothermal nucleic acid amplification methods (loop-mediated isothermal amplification and recombinase polymerase amplification) performed in microfluidic systems. The fourth section introduces microfluidic applications for nucleic acid amplification-based detection of SARS-CoV-2. Finally, the review concludes with the importance of full integration and quantitative analysis for clinical microbial identification.

Nucleic acid amplification-based microfluidic approaches for antimicrobial susceptibility testing

Because of the global spread of antimicrobials, there is an urgent need to develop rapid and effective tools for antimicrobial susceptibility testing to help clinicians prescribe accurate and appropriate antibiotic doses sooner. The conventional methods for antimicrobial susceptibility testing are usually based on bacterial culture methods, which are time-consuming, complicated, and labor-intensive. Therefore, other approaches are needed to address these issues. Recently, microfluidic technology has gained significant attention in infection management due to its advantages including rapid detection, high sensitivity and specificity, highly automated assay, simplicity, low cost, and potential for point-of-care testing in low-resource areas. Microfluidic advances for antimicrobial susceptibility testing can be classified into phenotypic (usually culture-based) and genotypic tests. Genotypic antimicrobial susceptibility testing is the detection of resistant genes in a microorganism using methods such as nucleic acid amplification. This review (with 107 references) surveys the different forms of nucleic acid amplification-based microdevices used for genotypic antimicrobial susceptibility testing. The first section reviews the serious threat of antimicrobial-resistant microorganisms and the urgent need for fast check-ups. Next, several conventional antimicrobial susceptibility testing methods are discussed, and microfluidic technology as a promising candidate for rapid detection of antimicrobial-resistant microorganisms is briefly introduced. The next section highlights several advancements of microdevices, with an emphasis on their working principles and performance. The review concludes with the importance of fully integrated microdevices and a discussion on future perspectives.

Nanoparticle-Mediated Capture and Electrochemical Detection of Methicillin-Resistant Staphylococcus aureus

The spread of antibiotic-resistant bacteria poses a global threat to public health. Conventional bacterial detection and identification methods often require pre-enrichment and/or sample preprocessing and purification steps that can prolong diagnosis by days. Methicillin-resistant Staphylococcus aureus (MRSA) is one of the most widespread antibiotic-resistant bacteria and is the leading cause of hospital-acquired infections. Here, we have developed a method to specifically capture and detect MRSA directly from patient nasal swabs with no prior culture and minimal processing steps using a microfluidic device and antibody-functionalized magnetic nanoparticles. Bacteria are captured based on antibody recognition of a membrane-bound protein marker that confers β-lactam antibiotic resistance. MRSA identification is then achieved by the use of a strain-specific antibody functionalized with alkaline phosphatase for electrochemical detection. This approach ensures that only those bacteria of the target strain and resistance profile are measured. The method has a limit of detection of 845 CFU/mL and excellent discrimination against high concentrations of common nontarget nasal flora with a turnaround time of under 4.5 h. This detection method was successfully validated using clinical nasal swab specimens ( n = 30) and has the potential to be tailored to various bacterial targets.

Microfluidics: innovative approaches for rapid diagnosis of antibiotic-resistant bacteria

The emergence of antibiotic-resistant bacteria has become a major global health concern. Rapid and accurate diagnostic strategies to determine the antibiotic susceptibility profile prior to antibiotic prescription and treatment are critical to control drug resistance. The standard diagnostic procedures for the detection of antibiotic-resistant bacteria, which rely mostly on phenotypic characterization, are time consuming, insensitive and often require skilled personnel, making them unsuitable for point-of-care (POC) diagnosis. Various molecular techniques have therefore been implemented to help speed up the process and increase sensitivity. Over the past decade, microfluidic technology has gained great momentum in medical diagnosis as a series of fluid handling steps in a laboratory can be simplified and miniaturized on to a small platform, allowing marked reduction of sample amount, high portability and tremendous possibility for integration with other detection technologies. These advantages render the microfluidic system a great candidate to be developed into an easy-to-use sample-to-answer POC diagnosis suitable for application in remote clinical settings. This review provides an overview of the current development of microfluidic technologies for the nucleic acid based and phenotypic-based detections of antibiotic resistance.

Titania Nanocrystal Surface Functionalization through Silane Chemistry for Low Temperature Deposition on Polymers

A method to obtain photocatalytically active thin films of anatase nanocrystals on polymer substrates was explored. Anatase nanocrystals were synthesized by a fast hydrolysis synthesis in an apolar solvent and characterized with regard to their crystallinity, size, and dispersibility and the stability of the resulting suspensions. The stable titania nanocrystal suspensions were further processed for their use in polar solvents using ligand exchange. Oleic acid was exchanged for 3-aminopropyltriethoxysilane (APTES), resulting in aqueous suspensions of charge-stabilized nanocrystals. These were adapted for use as coating suspensions for surface-treated PMMA substrates in order to obtain thin films containing anatase nanocrystals covalently coupled to the surface of the PMMA substrates. Thereby, the ligand exchange was beneficial for increasing the compatibility and durability of the inorganic/organic composite, by the formation of a covalent amide bond between the silane ligands on the nanocrystals and the carboxylic acid groups on the polymer substrate. The surface morphology, transparency, and photocatalytic activity toward the degradation of organic pollutants of the coatings, obtained through dip-coating, were evaluated.

A combination of positive dielectrophoresis driven on-line enrichment and aptamer-fluorescent silica nanoparticle label for rapid and sensitive detection of Staphylococcus aureus

Staphylococcus aureus (S. aureus) is an important human pathogen that causes several diseases ranging from superficial skin infections to life-threatening diseases. Here, a method combining positive dielectrophoresis (pDEP) driven on-line enrichment and aptamer-fluorescent silica nanoparticle label has been developed for the rapid and sensitive detection of S. aureus in microfluidic channels. An aptamer, having high affinity to S. aureus, is used as the molecular recognition tool and immobilized onto chloropropyl functionalized fluorescent silica nanoparticles through a click chemistry approach to obtain S. aureus aptamer-nanoparticle bioconjugates (Apt(S.aureus)/FNPs). The pDEP driven on-line enrichment technology was used for accumulating the Apt(S.aureus)/FNP labeled S. aureus. After incubating with S. aureus, the mixture of Apt(S.aureus)/FNP labeled S. aureus and Apt(S.aureus)/FNPs was directly introduced into the pDEP-based microfluidic system. By applying an AC voltage in a pDEP frequency region, the Apt(S.aureus)/FNP labelled S. aureus moved to the electrodes and accumulated in the electrode gap, while the free Apt(S.aureus)/FNPs flowed away. The signal that came from the Apt(S.aureus)/FNP labelled S. aureus in the focused detection areas was then detected. Profiting from the specificity of aptamer, signal amplification of FNP label and pDEP on-line enrichment, this assay can detect as low as 93 and 270 cfu mL(-1)S. aureus in deionized water and spiked water samples, respectively, with higher sensitivities than our previously reported Apt(S.aureus)/FNP based flow cytometry. Moreover, without the need for separation and washing steps usually required for FNP label involved bioassays, the total assay time including sample pretreatment was within 2 h.

UV activation of polymeric high aspect ratio microstructures: ramifications in antibody surface loading for circulating tumor cell selection

The need to activate thermoplastic surfaces using robust and efficient methods has been driven by the fact that replication techniques can be used to produce microfluidic devices in a high production mode and at low cost, making polymer microfluidics invaluable for in vitro diagnostics, such as circulating tumor cell (CTC) analysis, where device disposability is critical to mitigate artifacts associated with sample carryover. Modifying the surface chemistry of thermoplastic devices through activation techniques can be used to increase the wettability of the surface or to produce functional scaffolds to allow for the covalent attachment of biologics, such as antibodies for CTC recognition. Extensive surface characterization tools were used to investigate UV activation of various surfaces to produce uniform and high surface coverage of functional groups, such as carboxylic acids in microchannels of different aspect ratios. We found that the efficiency of the UV activation process is highly dependent on the microchannel aspect ratio and the identity of the thermoplastic substrate. Colorimetric assays and fluorescence imaging of UV-activated microchannels following EDC/NHS coupling of Cy3-labeled oligonucleotides indicated that UV-activation of a PMMA microchannel with an aspect ratio of ~3 was significantly less efficient toward the bottom of the channel compared to the upper sections. This effect was a consequence of the bulk polymer's damping of the modifying UV radiation due to absorption artifacts. In contrast, this effect was less pronounced for COC. Moreover, we observed that after thermal fusion bonding of the device's cover plate to the substrate, many of the generated functional groups buried into the bulk rendering them inaccessible. The propensity of this surface reorganization was found to be higher for PMMA compared to COC. As an example of the effects of material and microchannel aspect ratios on device functionality, thermoplastic devices for the selection of CTCs from whole blood were evaluated, which required the immobilization of monoclonal antibodies to channel walls. From our results, we concluded the CTC yield and purity of isolated CTCs were dependent on the substrate material with COC producing the highest clinical yields for CTCs as well as better purities compared to PMMA.