Enhanced synergistic antiviral effects of thermally expanded graphite and copper oxide nanosheets in the form of a novel nanocomposite against herpes simplex virus type 1

Herpes simplex virus type 1 (HSV-1) is responsible for a wide range of human infections, including skin and mucosal ulcers, encephalitis, and keratitis. The gold standard for treating HSV-1 infections is acyclovir. However, the use of this drug is associated with several limitations such as toxic reactions and the development of drug-resistant strains. So, there is an urgent need to discover and develop novel and effective agents against this virus. For the first time, this study aimed to investigate the antiviral effects of the Thermally Expanded Graphite (TEG)-copper oxide (CuO) nanocomposite against HSV-1 and compare results with its constituent components. After microwave (MW)-assisted synthesis of TEG and CuO nanosheets as well as MW-CuO/TEG nanocomposite and characterization of all these nanomaterials, an MTT assay was used to determine their cytotoxicity. The quantitative real-time PCR was then used to investigate the effects of these nanomaterials on viral load. Three-hour incubation of HSV-1 with TEG nanosheets (500 μg/mL), MW-CuO nanosheets (15 μg/mL), and MW-CuO/TEG nanocomposite (35 μg/mL) resulted in a decrease in viral load with an inhibition rate of 31.4 %, 49.2 %, and 74.4 %, respectively. The results from the post-treatment assay also showed that TEG nanosheets (600 μg/mL), MW-CuO nanosheets (15 μg/mL), and MW-CuO/TEG nanocomposite (10 μg/mL) led to a remarkable decrease in viral load with an inhibition rate of 56.9 %, 63 %, and 99.9 %, respectively. The combination of TEG and MW-CuO nanosheets together and the formation of a nanocomposite structure display strong synergy in their ability to inhibit HSV-1 infection. MW-CuO/TEG nanocomposites can be considered a suitable candidate for the treatment of HSV-1 infection.

Molecular Docking Approach for Biological Interaction of Green Synthesized Nanoparticles

In recent years, significant progress has been made in the subject of nanotechnology, with a range of methods developed to synthesize precise-sized and shaped nanoparticles according to particular requirements. Often, the nanoparticles are created by employing dangerous reducing chemicals to reduce metal ions into uncharged nanoparticles. Green synthesis or biological approaches have been used recently to circumvent this issue because biological techniques are simple, inexpensive, safe, clean, and extremely productive. Nowadays, much research is being conducted on how different kinds of nanoparticles connect to proteins and nucleic acids using molecular docking models. Therefore, this review discusses the most recent advancements in molecular docking capacity to predict the interactions between various nanoparticles (NPs), such as ZnO, CuO, Ag, Au, and Fe3O4, and biological macromolecules.

Copper Oxide Nanoparticle-Based Immunosensor for Zearalenone Analysis by Combining Automated Sample Pre-Processing and High-Throughput Terminal Detection

A rapid and high-throughput fluorescence detection method for zearalenone (ZEN) based on a CuO nanoparticle (NP)-assisted signal amplification immunosensor was developed using an automated sample pretreatment and signal conversion system. CuO NPs with high stability and biocompatibility were used as carriers to immobilize anti-ZEN antibodies. The obtained CuO NP-anti-ZEN can maintain the ability to recognize target toxins and act as both a signal source and carrier to achieve signal conversion using automated equipment. In this process, target toxin detection is indirectly transformed to Cu²⁺ detection because of the large number of Cu²⁺ ions released from CuO NPs under acidic conditions. Finally, a simple and high-throughput fluorescence assay based on a fluorescent tripeptide molecule was employed to detect Cu²⁺, using a multifunctional microporous plate detector. A good linear relationship was observed between the fluorescence signal and the logarithm of ZEN concentration in the range of 16.0–1600.0 μg/kg. Additionally, excellent accuracy with a high recovery yield of 99.2–104.9% was obtained, which was concordant with the results obtained from LC-MS/MS of naturally contaminated samples. The CuO NP-based assay is a powerful and efficient screening tool for ZEN detection and can easily be modified to detect other mycotoxins.

Silver, copper and copper oxide nanoparticles in the fight against human viruses: progress and perspectives

The rapid development of nanomedicine has created a high demand for silver, copper and copper oxide nanoparticles. Due to their high reactivity and potent antimicrobial activity, silver and copper-based nanomaterials have been playing an important role in the search for new alternatives for the treatment of several issues of concern, such as pathologies caused by bacteria and viruses. Viral diseases are a significant and constant threat to public health. The most recent example is the pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). In this context, the object of the present review is to highlight recent progress in the biomedical uses of these metal nanoparticles for the treatment and prevention of human viral infections. We discuss the antiviral activity of AgNPs and Cu-based NPs, including their actions against SARS-CoV-2. We also discuss the toxicity, biodistribution and excretion of AgNPs and CuNPs, along with their uses in medical devices or on inert surfaces to avoid viral dissemination by fomites. The challenges and limitations of the biomedical use of these nanoparticles are presented.

Sensitive pH-responsive point-of-care electrochemical immunoassay for influenza A (H1N1) virus using glucose oxidase-functionalized Ti3C2-MXene nanosheets

Influenza A (H1N1) virus is a serious health threat and potential leading cause of death around the world during the processes of immunity and inflammation. Herein a sensitive pH-responsive point-of-care (POC) electrochemical immunoassay was designed for the quantitative monitoring of H1N1 influenza virus using glucose oxidase (GOx) and secondary antibody-functionalized Ti₃C₂-MXene nanosheets. The assay was carried out on the basis of the sandwich-type immunoreaction in the capture antibody-coated microplate. Two-dimensional (2D) Ti₃C₂-MXene nanosheets with a large surface area could efficiently enhance the loading amount of GOx molecules, thereby resulting in the signal amplification. Accompanying the formed immunocomplexes, labeled GOx molecules catalyzed glucose into gluconic acid and hydrogen peroxide. The generated gluconic acid caused a pH change of the detection solution, which was quantitatively determined on a handheld pH meter. Two labeling strategies with and without Ti₃C₂-MXene nanosheets were investigated to determine the target H1N1 influenza virus, and improved properties were acquired with the Ti₃C₂-MXene-labeled system. Under optimum conditions, the Ti₃C₂-MXene-based immunoassay gave good dynamic responses toward the target H1N1 influenza virus from 0.01 μg mL^-1 to 100 μg mL^-1 with a detection limit of 1.3 ng mL^-1. Good reproducibility, high specificity, and acceptable stability were also achieved in the analysis of the target H1N1 influenza virus. Significantly, measurements of the H1N1 influenza virus from clinical human samples were demonstrated to further confirm the method reliability and accuracy of the Ti₃C₂-MXene-based electrochemical immunoassay. Importantly, such a pH-meter-based immunoassay can be suitable for use in point-of-care applications and opens new opportunities for diagnostics.

Application of electrochemical methods for the detection of abiotic stress biomarkers in plants

Abiotic stress is the main cause of low productivity in plants. Therefore, it is important to detect stress and respond to it in a timely manner to avoid irreversible damage to plant productivity and health. The application of traditional methods in agriculture is limited by expensive equipment and cumbersome sample processing. More effective detection methods are urgently needed due to the trace amounts and low stabilities of plant biomarkers. Electrochemical detection methods have the unique advantages of high accuracy, a low detection limit, fast response and easy integration with systems. In this review, the application of three types of electrochemical methods to phytohormone assessment is highlighted including direct electrochemical, immunoelectrochemical, and photoelectrochemical methods. Research on electrochemical methods for detecting abiotic stress biomarkers, including various phytohormones, is also summarized with examples. To date, the detection limit of exogenous plant hormones can reach pg/mL or even lower. Nevertheless, more efforts need to be made to develop a portable instrument for in situ online detection if electrochemical sensors are to be applied to the detection of the endogenous hormones or the physiological state of plants. Additionally, plant-wearable sensors that can be directly attached to or implanted into plants for continuous, noninvasive and real-time monitoring are emphasized. Finally, rational summaries of the considered methods and present challenges and future prospects in the field of abiotic stress detection-based electrochemical biosensors are thoroughly discussed.

Detection and disinfection of COVID-19 virus in wastewater

The coronavirus disease 2019, COVID-19, caused by the severe acute respiratory syndrome coronavirus 2, SARS-CoV-2, appears as a major pandemic having adverse impact on public health and economic activities. Since viral replication in human enterocytes results in its faecal shedding, wastewater surveillance is an ideal, non-invasive, cost-effective and an early warning epidemiological approach to detect the genetic material of SARS-CoV-2. Here, we review techniques for the detection of SARS-CoV-2 in municipal wastewater, and disinfectants used to control viral spread. For detection, concentration of ribonucleic acid involves ultrafiltration, ultracentrifugation and polyethylene glycol precipitation. Identification is done by reverse transcriptase amplification, nucleic acid sequence-based amplification, helicase dependent amplification, loop-mediated isothermal amplification, recombinase polymerase amplification, high throughput screening and biosensor assays. Disinfectants include ultraviolet radiations, ozone, chlorine dioxide, hypochlorites and hydrogen peroxide. Wastewater surveillance data indicates viral presence within longer detection window, and provides transmission dynamics earlier than classical methods. This is particularly relevant for pre-symptomatic and asymptomatic COVID-19 cases.

Survey of Saliva Components and Virus Sensors for Prevention of COVID-19 and Infectious Diseases

The United States Centers for Disease Control and Prevention considers saliva contact the lead transmission means of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which causes the coronavirus disease 2019 (COVID-19). Saliva droplets or aerosols expelled by heavy breathing, talking, sneezing, and coughing may carry this virus. People in close distance may be exposed directly or indirectly to these droplets, especially those droplets that fall on surrounding surfaces and people may end up contracting COVID-19 after touching the mucosa tissue on their faces. It is of great interest to quickly and effectively detect the presence of SARS-CoV-2 in an environment, but the existing methods only work in laboratory settings, to the best of our knowledge. However, it may be possible to detect the presence of saliva in the environment and proceed with prevention measures. However, detecting saliva itself has not been documented in the literature. On the other hand, many sensors that detect different organic components in saliva to monitor a person's health and diagnose different diseases that range from diabetes to dental health have been proposed and they may be used to detect the presence of saliva. This paper surveys sensors that detect organic and inorganic components of human saliva. Humidity sensors are also considered in the detection of saliva because a large portion of saliva is water. Moreover, sensors that detect infectious viruses are also included as they may also be embedded into saliva sensors for a confirmation of the virus' presence. A classification of sensors by their working principle and the substance they detect is presented. This comparison lists their specifications, sample size, and sensitivity. Indications of which sensors are portable and suitable for field application are presented. This paper also discusses future research and challenges that must be resolved to realize practical saliva sensors. Such sensors may help minimize the spread of not only COVID-19 but also other infectious diseases.

Interaction of nanoparticles with biological macromolecules: a review of molecular docking studies

The high frequency of using engineered nanoparticles in various medical applications entails a deep understanding of their interaction with biological macromolecules. Molecular docking simulation is now widely used to study the binding of different types of nanoparticles with proteins and nucleic acids. This helps not only in understanding the mechanism of their biological action but also in predicting any potential toxicity. In this review, the computational techniques used in studying the nanoparticles interaction with biological macromolecules are covered. Then, a comprehensive overview of the docking studies performed on various types of nanoparticles will be offered. The implication of these predicted interactions in the biological activity and/or toxicity is also discussed for each type of nanoparticles.

Opportunities and Challenges for Biosensors and Nanoscale Analytical Tools for Pandemics: COVID-19

Biosensors and nanoscale analytical tools have shown huge growth in literature in the past 20 years, with a large number of reports on the topic of 'ultrasensitive', 'cost-effective', and 'early detection' tools with a potential of 'mass-production' cited on the web of science. Yet none of these tools are commercially available in the market or practically viable for mass production and use in pandemic diseases such as coronavirus disease 2019 (COVID-19). In this context, we review the technological challenges and opportunities of current bio/chemical sensors and analytical tools by critically analyzing the bottlenecks which have hindered the implementation of advanced sensing technologies in pandemic diseases. We also describe in brief COVID-19 by comparing it with other pandemic strains such as that of severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS) for the identification of features that enable biosensing. Moreover, we discuss visualization and characterization tools that can potentially be used not only for sensing applications but also to assist in speeding up the drug discovery and vaccine development process. Furthermore, we discuss the emerging monitoring mechanism, namely wastewater-based epidemiology, for early warning of the outbreak, focusing on sensors for rapid and on-site analysis of SARS-CoV2 in sewage. To conclude, we provide holistic insights into challenges associated with the quick translation of sensing technologies, policies, ethical issues, technology adoption, and an overall outlook of the role of the sensing technologies in pandemics.

Fluorescent-Magnetic-Catalytic Nanospheres for Dual-Modality Detection of H9N2 Avian Influenza Virus

The outbreak of H9N2 avian influenza virus (H9N2 AIV) brings high mortality and huge economic losses every year. Sensitive and reliable detection methods are essential to timely diagnosis and treatment. Herein, a dual-modality immunoassay is proposed for H9N2 AIV detection by employing fluorescent-magnetic-catalytic nanospheres (FMCNs) as labels and alkaline phosphatase (ALP)-induced metallization as a signal amplification strategy. The excellent magnetic properties of FMCNs endow the assay a potential application in complex samples. Also, the excellent fluorescence properties of FMCNs enable fluorescence modality readout. The antibodies on the FMCN surface can achieve efficient capture and separation of targets. Amplified electrochemical modality readout can be obtained through ALP-catalyzed silver deposition. Dual-modality immunoassay combined the advantages of electrochemical assay with fluorescence assay and provides accurate detection results to meet different testing needs. With two quantitative analysis forms, H9N2 AIV can be detected by electrochemical signals with a quantitation range of 0.1 to 1000 ng/mL and a detection limit of 10 pg/mL. The linear range is 300 to 1000 ng/mL with a detection limit of 69.8 ng/mL by the fluorescence signal readout. Moreover, the specificity, anti-interference ability, accuracy, and diversity of the proposal have unlimited potential for early diagnosis of suspect infections.

Reduction of the Cytotoxicity of Copper (II) Oxide Nanoparticles by Coating with a Surface-Binding Peptide

Copper (II) oxide nanoparticles (CuO-NPs) have been studied as potential antimicrobial agents, similar to silver or platinum nanoparticles. However, the use of excess NPs is limited by their safety and toxicity in beneficial microflora and human cells. In this study, we evaluated the cytotoxicity of CuO-NPs by coating with a novel cyclic peptide, CuO binding peptide 1 (CuBP1), cyclic-SCATPFSPQVCS, which binds to the surface of CuO-NPs. CuBP1 was identified using biopanning of a T7 phage display system and was found to promote the aggregation of CuO-NPs under mild conditions. The treated CuO-NPs with CuBP1 caused the reduction of the cytotoxicity against Escherichia coli, Lactobacillus helveticus, and five other microorganisms, including bacteria and eukaryotes. Similar effects were also demonstrated against human embryonic kidney (HEK293) cells in vitro. Our findings suggested that the CuO-NPs coated with a surface-binding peptide may have applications as a safe antimicrobial agent without excessive cytotoxic activity against beneficial microflora and human cells. Moreover, a similar tendency may be achieved with other metal particles, such as silver or platinum NPs, by using optimal metal binding peptides.

Nanoparticle-based Point of Care Immunoassays for in vitro Biomedical Diagnostics

In resource-limited settings, the availability of medical practitioners and early diagnostic facilities are inadequate relative to the population size and disease burden. To address cost and delayed time issues in diagnostics, strip-based immunoassays, e.g. dipstick, lateral flow assay (LFA) and microfluidic paper-based analytical devices (microPADs), have emerged as promising alternatives to conventional diagnostic approaches. These assays rely on chromogenic agents to detect disease biomarkers. However, limited specificity and sensitivity have motivated scientists to improve the efficiency of these assays by conjugating chromogenic agents with nanoparticles for enhanced qualitative and quantitative output. Various nanomaterials, which include metallic, magnetic and luminescent nanoparticles, are being used in the fabrication of biosensors to detect and quantify biomolecules and disease biomarkers. This review discusses some of the principles and applications of such nanoparticle-based point of care biosensors in biomedical diagnosis.

A Colorimetric Enzyme-Linked Immunosorbent Assay with CuO Nanoparticles as Signal Labels Based on the Growth of Gold Nanoparticles In Situ

A colorimetric immunoassay has been reported for prostate-specific antigen (PSA) detection with CuO nanoparticles (CuO NPs) as signal labels. The method is based on Cu²⁺-catalyzed oxidation of ascorbic acid (AA) by O₂ to depress the formation of colored gold nanoparticles (AuNPs). Specifically, HAuCl₄ can be reduced by AA to produce AuNPs in situ. In the presence of target, CuO NPs-labeled antibodies were captured via the sandwich-type immunoreaction. After dissolving CuO nanoparticles with acid, the released Cu²⁺ catalyzed the oxidation of AA by O₂, thus depressing the generation of AuNPs. To demonstrate the accuracy of the colorimetric assay, the released Cu²⁺ was further determined by a fluorescence probe. The colorimetric immunoassay shows a linear relationship for PSA detection in the range of 0.1~10 ng/mL. The detection limit of 0.05 ng/mL is comparable to that obtained by other CuO NPs-based methods. The high throughput, simplicity, and sensitivity of the proposed colorimetric immunoassay exhibited good applicability for assays of serum samples.

Development of a smartphone-based rapid dual fluorescent diagnostic system for the simultaneous detection of influenza A and H5 subtype in avian influenza A-infected patients

Accurate and rapid diagnosis of highly pathogenic avian influenza A H5N1 is of critical importance for the effective clinical management of patients. Here, we developed a rapid and simultaneous detection toolkit for influenza A H5 subtype viruses in human samples based on a bioconjugate of quantum dots (QDs) assembly and a smartphone-based rapid dual fluorescent diagnostic system (SRDFDS). Methods: Two types of QDs were assembled on a latex bead to enhance the detection sensitivity and specificity of influenza A infection (QD580) and H5 subtype (QD650). The dual signals of influenza A and H5 subtype of H5N1-infected patients were detected simultaneously and quantified separately by SRDFDS equipped with two emission filters. Results: Our results showed a high sensitivity of 92.86% (13/14) and 78.57% (11/14), and a specificity of 100% (38/38, P < 0.0001) and 97.37% (37/38) for influenza A and H5 subtype detection, respectively. Conclusion: Therefore, our multiplex QD bioconjugates and SRDFDS-based influenza virus detection toolkit potentially provide accurate and meaningful diagnosis information with improved detection accuracies and sensitivities for H5N1 patients.

Trypsin electrochemical sensing using two-dimensional molecularly imprinted polymers on 96-well microplates

Molecular imprinting is an efficient technology to create artificial receptors with antibody-like binding properties for a variety of applications such as separation and sensing. In this work, a new sensing method was introduced by combining a two-dimensional molecularly imprinted polymer (2D-MIP) film with copper oxide nanoparticles (CuO NPs) labeling for signal conversion and amplification. CuO labeling can effectively monitor the thickness of 2D-MIPs to achieve the best imprinting effect. Trypsin imprinted polymer based electrochemical sensor on 96-well microplates was constructed and a good dynamic response was observed in the range of 0.5-500 ng/mL. Furthermore, detections of trypsin in fetal bovine serum were demonstrated using the imprinted polymer thin films. Our electrochemical sensors possess an excellent specificity, fast kinetics, high sensitivity and low cost, which have great potential in biological analysis.

Preparation of Functionalized Magnetic Fe₃O₄@Au@polydopamine Nanocomposites and Their Application for Copper(II) Removal

Polydopamine (PDA) displays many striking properties of naturally occurring melanin in optics, electricity, and biocompatibility. Another valuable feature of polydopamine lies in its chemical structure that incorporates many functional groups such as amine, catechol and imine. In this study, a nanocomposite of magnetic Fe₃O₄@Au@polydopamine nanopaticles (Fe₃O₄@Au@ PDA MNPs) was synthesized. Carboxyl functionalized Fe₃O₄@Au nanoparticles (NPs) were successfully embedded in a layer of PDA through dopamine oxypolymerization in alkaline solution. Through the investigation of adsorption behavior to Cu(II), combined with high sensitive electrochemical detection, the as-prepared magnetic nanocomposites (MNPs) have been successfully applied in the separation and analysis of Cu(II). The experimental parameters of temperature, Cu(II) concentration and pH were optimized. Results showed that the as-prepared MNPs can reach saturation adsorption after adsorbing 2 h in neutral environment. Furthermore, the as-prepared MNPs can be easily regenerated by temperature control and exhibits a good selectivity compared to other metal ions. The prepared Fe₃O₄@Au@PDA MNPs are expected to act as a kind of adsorbent for Cu(II) deep removal from contaminated waters.

Antigen-responsive fluorescent antibody probes generated by selective N-terminal modification of IgGs

Fluorescent antibody probes showing antigen-dependent fluorescence responses were developed by N-terminal-selective reductive alkylation of IgGs.

Methods of Synthesis, Properties and Biomedical Applications of CuO Nanoparticles

This study aims to provide an updated survey of the main synthesis methods of copper oxide (CuO) nanoparticles in order to obtain tailored nanosystems for various biomedical applications. The synthesis approach significantly impacts the properties of such nanoparticles and these properties in turn have a significant impact on their biomedical applications. Although not widely investigated as an efficient drug delivery system, CuO nanoparticles have great biological properties including effective antimicrobial action against a wide range of pathogens and also drug resistant bacteria. These properties have led to the development of various approaches with direct applications to the biomedical field, such as tailored surfaces with antimicrobial effect, wound dressings and modified textiles. It is also believed that these nanosystems could represent efficient alternatives in the development of smart systems utilized both for the detection of pathogens and for the treatment of infections.

Cost-effective and sensitive colorimetric immunosensing using an iron oxide-to-Prussian blue nanoparticle conversion strategy

The development of new sensitive, cost-effective and user-friendly colorimetric bioassays is in increasing demand to meet the requirement of modern clinical diagnostics and field detection. Herein, a novel iron oxide-to-Prussian blue (PB) nanoparticle (NP) conversion strategy was developed and applied to sensitive colorimetric immunosensing of cancer biomarkers. In a typical sandwich-type immunosensing system, the captured spherical antibody-conjugated iron oxide NPs were transformed into cubic PB NPs, which exhibited a highly visible blue color with high molar extinction coefficients. Hence, a new colorimetric immunosensing strategy was developed as a result of this low cost and simple transformation process. Without the aid of any complex nanoparticle stabilizing ligands and signal amplification processes, prostate-specific antigen as a model analyte can be detected at a concentration as low as 1.0 ng mL(-1) by the naked eye with good reliability for detection of real human serum samples. This is the first attempt to develop and apply the iron oxide-to-PB NP colorimetric conversion strategy for immunosensing, and shows great promise for the development of new sensitive, cost-effective and user-friendly colorimetric bioassays in various bioanalytical applications, especially in low-resource settings.

Electrical immunosensor based on dielectrophoretically-deposited carbon nanotubes for detection of influenza virus H1N1

The influenza virus has received extensive attention due to the recent H1N1 pandemics originating from swine. This study reports a label-free, highly sensitive, and selective electrical immunosensor for the detection of influenza virus H1N1 based on dielectrophoretically deposited single-walled carbon nanotubes (SWCNTs). COOH-functionalized SWCNTs were deposited on a self-assembled monolayer of polyelectrolyte polydiallyldimethyl-ammonium chloride (PDDA) between two gold electrodes by dielectrophoretic and electrostatic forces, which resulted in reproducible, uniform, aligned, and aggregation-free SWCNT channels (2-10 μm in length). Avidin was immobilized onto the PDDA-SWCNT channels, and viral antibodies were immobilized using biotin-avidin coupling. The resistance of the channels increased with the binding of the influenza viruses to the antibodies. These immunosensors showed linear behavior as the virus concentration was varied from 1 to 10(4) PFU ml(-1) along with a detection time of 30 min. The immunosensors with a 2 μm channel length detected 1 PFU ml(-1) of the influenza virus accurately (R(2) = 0.99) and selectively from MS2 bacteriophages. These immunosensors have the potential to become an important component of a point-of-care test kit that will enable a rapid clinical diagnosis.

Branched zinc oxide nanorods arrays modified paper electrode for electrochemical immunosensing by combining biocatalytic precipitation reaction and competitive immunoassay mode

Branched zinc oxide nanorods (BZR) arrays, an array with high charge carries collection efficiency and specific surface area, are grown on the reduced graphene oxide-paper working electrode for the first time to construct a paper-based electrochemical (EC) immunosensor. Typically, the BZR are fabricated via a simple hydrothermal process, which can provide abundant sites for antibodies loading. By combining the large surface area of porous zinc oxide (PZS) and good biocompatibility of gold nanoparticles (AuNPs), PZS-AuNPs (PZS@Au) nanocomposites are designed to label horseradish peroxide (HRP) and antigens. After a competitive reaction between antigens and PZS@Au nanocomposites labeled antigens, the signal labels are introduced into the immunosensor, in which, HRP participate in biocatalytic precipitation process. The produced precipitate reduces the electrode surface area and hinders the electron transfer. With the increase of concentration of antigens, the signal labels introduced into the sensor decrease, thus, a signal-on immunoassay for α-fetoprotein detection is constructed. The proposed paper-based EC immunosensor combines enzymatic biocatalytic precipitation reaction and competitive immunoassay mode for the first time, and possesses a wide linear range from 0.2 pg mL(-1) to 500 ng mL(-1) with a detection limit of 0.08 pg mL(-1). In addition, the proposed method is simple, sensitive and specific and can be a promising platform for other protein detection.