Preparation of BN Nanoparticle with High Sintering Activity and Its Formation Mechanism

Hexagonal boron nitride (h-BN) nanoparticles have attracted increasing attention due to their unique structure and properties. However, it is difficult to synthesize h-BN nanoparticles with uniform spherical morphology due to their crystal characteristic. The morphology control by tuning their precursor synthesis is a promising and effective strategy to solve this problem. Especially, the treatment temperature of precursors plays an important role in the morphology and surface area of h-BN nanoparticles. Herein, h-BN nanoparticles with different morphologies were synthesized via regulating the treatment temperature of precursors. The result shows that treatment temperature will affect the microstructure and state of precursor and further influence the morphology of h-BN products. Benefiting from the unique structure, the h-BN obtained using 250 °C precursors shows higher specific surface area (61.1 m2 g-1) than that of 85 °C (36.5 m2 g-1) and 145 °C (27.9 m2 g-1). h-BN products obtained using 250 °C precursors show higher specific surface area than that of 85 °C and 145 °C. The optimal condition for obtaining high-quality spherical h-BN is the pretreatment temperature of 250 °C and sintering temperature of 1300 °C. Importantly, compared with commercial h-BN nanoparticles, the synthesized h-BN nanoparticles show more uniform structure and larger specific surface area, indicating that sintering activity will be greatly improved. Furthermore, the reaction pathway and formation mechanism of h-BN was revealed by DFT calculations. The result shows that the five stationary states and five transition states exist in the reaction pathway, and the energy barrier can be overcome at high temperatures to form a ring h-BN. In view of its simplicity and efficiency, this work is promising for designing and guiding the synthesis of h-BN nanoparticles with uniform morphology.

Boron Nitride Nanosheet-Magnetic Nanoparticle Composites for Water Remediation Applications

The combination of 0D nanoparticles with 2D nanomaterials has attracted a lot of attention over the last years due to the unique multimodal properties of resulting 0D-2D nanocomposites. In this work, we developed boron nitride nanosheets (BNNS) functionalized with manganese ferrite magnetic nanoparticles (MNPs). The functionalization process involved attachment of MNPs to exfoliated BNNS by refluxing the precursor materials in a polyol medium. Characterization of the produced BNNS-MNP composites was carried out using powder X-ray diffraction, transmission electron microscopy, vibrating sample magnetometry, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The adhesion of MnFe2O4 magnetic nanoparticles onto the BNNS remained unaffected by repeated sonication and heating in a furnace at 400 °C, underscoring the robust nature of the formed bond. FTIR spectra and XPS deconvolution confirmed the presence of strong bonding between BNNS and the MNPs. Membranes were fabricated from the BNNS and the BNNS-MnFe2O4 nanocomposites for evaluating their efficiency in removing the methylene blue dye pollutant. The membranes have been characterized by scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, and mercury intrusion porosimetry. The effectiveness of dye removal was monitored using ultraviolet-visible spectroscopy. The BNNS-MnFe2O4 nanocomposite membranes exhibited enhanced MB capture compared to membranes made from pure BNNS alone. The recyclability assessment of BNNS-MnFe2O4 demonstrated exceptional performance, retaining 92% efficiency even after eight cycles. These results clearly demonstrate the high potential of these magnetic nanocomposites as reusable materials for water filtration membranes. Furthermore, the introduction of magnetic functionality as part of the membrane brings an exciting opportunity for in situ magnetic heating of the membrane, which shall be explored in future work.

Degradation of Organic Dyes by the UCNP/h-BN/TiO2 Ternary Photocatalyst

In this study, upconversion nanoparticles (UCNPs) with a flower-like morphology were prepared using a urea coprecipitation method. A ternary photocatalyst was first prepared using a solvothermal method involving the use of titanium oxide (TiO2), hexagonal boron nitride (h-BN), and UCNPs (Y2O3, Yb3+, and Tm3+) as raw materials. The surface morphology, crystal structure, and functional groups of these materials were then characterized and analyzed through scanning electron microscopy, transmission electron microscopy, X-ray diffraction analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ultraviolet-visible spectrophotometry, and other techniques. Photocatalytic experiments were also conducted to investigate the effects of different catalyst types, raw material doping ratios, pH values, and catalyst quantities on the photocatalytic degradation of rhodamine B (RhB). The results indicated that doping with h-BN and UCNPs reduced the band gap width of RhB, increased its light absorption rate, and decreased the recombination rate of its photogenerated electrons and holes so that the photocatalytic degradation effect reached 100% within 2 h. After five experimental cycles, the 30% UC-BN-Ti photocatalyst remained highly durable and stable. To investigate the effects of different trapping agents on the degradation of RhB, benzoquinone, isopropanol, and ethylenediaminetetraacetic acid disodium salt were used as free-radical-capturing agents. The results indicated that •O2- was the primary active species in the degradation process. Finally, the pathway and mechanism of the degradation of RhB through ternary composite photocatalysis were identified.

Boron Nitride Nanosheets Functionalized with Fe3O4 and CoFe2O4 Magnetic Nanoparticles for Nanofiltration Applications

Nanofiltration (NF) is one of the emerging technologies that is very promising for water purification among many other applications. 2D boron nitride (BN) based nanomaterials are excellent building blocks for NF membranes. In our work, BN nanosheets (BNNS) have been functionalized with magnetic nanoparticles (MNPs) to form BNNS-MNP nanocomposites. It was found that the nanocomposites are stable with the MNPs giving very good coverage with both magnetite and cobalt ferrite MNPs and showing good attachment and stability to sonication. These nanocomposites have been tested for removal of methylene blue (MB) dye and MNPs from water. BNNS-magnetite nanocomposites showed higher removal efficiency of the MB from water than the corresponding pure BNNS, while the BNNS-cobalt ferrite removal efficiency was slightly less than the pure BNNS. The BNNS-cobalt ferrite material was regenerated by burning off the MB and recycled to show the recyclability of this material. The BNNS membranes were tested for filtration of 14 ± 4 nm magnetite MNPs and were found to capture 100% of the nanoparticles with no MNPs left in the filtrate. Thus, we have developed magnetic nanocomposite membranes, which have demonstrated great potential for water remediation. We believe that this research opens up promising ways for production of 2D nanocomposite materials with multiple applications.

How to Tailor Porous Boron Nitride Properties for Applications in Interfacial Processes

The research of new porous materials for applications in interfacial processes is key to addressing global energy and sustainability challenges. For example, porous materials can be used to store fuels such as hydrogen or methane or to separate chemical mixtures reducing the energy currently required by thermal separation processes. Their catalytic properties can be exploited to convert adsorbed molecules into valuable or less hazardous chemicals, thereby reducing energy consumption or pollutants emissions. Porous boron nitride (BN) has appeared as a promising material for applications in molecular separations, gas storage, and catalysis owing to its high surface area and thermal stability, as well as its tunable physical properties and chemistry. However, the production of porous BN is still limited to the laboratory scale, and its formation mechanism, as well as ways to control porosity and chemistry, are yet to be fully understood. In addition, studies have pointed toward the instability of porous BN materials when exposed to humidity, which could significantly impact performance in industrial applications. Studies on porous BN performance and recyclability when employed in adsorption, gas storage, and catalysis remain limited, despite encouraging preliminary studies. Moreover, porous BN powder must be shaped into macrostructures (e.g., pellets) to be used commercially. However, common methods to shape porous materials into macrostructures often cause a reduction in the surface area and/or mechanical strength. In recent years, research groups, including ours, have started addressing the challenges discussed above. Herein, we summarize our collective findings through a selection of key studies. First, we discuss the chemistry and structure of BN, clarifying confusion around terminology and discussing the hydrolytic instability of the material in relation to its structure and chemistry. We demonstrate a way to reduce the instability in water while still maintaining high specific surface area. We propose a mechanism for the formation of porous BN and discuss the effects of different synthesis parameters on the structure and chemistry of porous BN, therefore providing a way to tune its properties for selected applications. While the syntheses covered often lead to a powder product, we also present ways to shape porous BN powders into macrostructures while still maintaining high accessible surface area for interfacial processes. Finally, we evaluate porous BN performance for chemical separations, gas storage, and catalysis. While the above highlights key advances in the field, further work is needed to allow deployment of porous BN. Specifically, we suggest evaluating its hydrolytic stability, refining the ways to shape the material into stable and reproducible macrostructures, establishing clear design rules to produce BN with specific chemistry and porosity, and, finally, providing standardized test procedures to evaluate porous BN catalytic and sorptive properties to facilitate comparison.

Efficient and Reusable Sorbents Based on Nanostructured BN Coatings for Water Treatment from Antibiotics

Increasing contamination of wastewater with antibiotics used in agriculture, animal husbandry, and medicine is a serious problem for all living things. To address this important issue, we have developed an efficient platform based on a high specific surface area hexagonal boron nitride (BN) coating formed by numerous nanopetals and nanoneedles. The maximum sorption capacity of 1 × 1 cm² BN coatings is 502.78 µg/g (tetracycline, TET), 315.75 µg/g (ciprofloxacin, CIP), 400.17 µg/g (amoxicillin, AMOX), and 269.7 µg/g (amphotericin B, AMP), which exceeds the sorption capacity of many known materials. Unlike nanoparticles, BN-coated Si wafers are easy to place in and remove from antibiotic-contaminated aqueous solutions, and are easy to clean. When reusing the adsorbents, 100% efficiency was observed at the same time intervals as in the first cleaning cycle: 7 days (TET) and 14 days (CIP, AMOX, AMP) at 10 µg/mL, 14 days (TET, CIP, and AMOX) and 28 days (AMP) at 50 µg/mL, and 14 days (TET) and 28 days (CIP, AMOX and AMP) at 100 µg/mL. The results obtained showed that TET and CIP are best adsorbed on the surface of BN, so TET was chosen as an example for further theoretical modeling of the sorption process. It was found that adsorption is the main mechanism, and this process is spontaneous and endothermic. This highlights the importance of a high specific surface area for the efficient removal of antibiotics from aqueous solutions.

Synthesis of Turbostratic Boron Nitride: Effect of Urea Decomposition

Since the recent discovery of the template-free synthesis of porous boron nitride, research on the synthesis and application of the material has steadily increased. Nevertheless, the formation mechanism of boron nitride is not yet fully understood. Especially for the complex precursor decomposition of urea-based turbostratic boron nitride (t-BN), a profound understanding is still lacking. Therefore, in this publication, we investigate the influence of different common pre-heating temperatures of 100, 200, 300, and 400 °C on the subsequent properties of t-BN. We show that the structure and porosity of t-BN can be changed by preheating, where a predominantly mesoporous material can be obtained. Within these investigations, the sample BN-300/2 depicts the highest mesopore surface area of 242 m² g^-1 with a low amount of micropores compared to other BNs. By thermal gravimetric analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy, valid details about the formation of intermediates, types of chemical bonds, and the generation of t-BN are delivered. Hence, we conclude that the formation of a mesoporous material arises due to a more complete decomposition of the urea precursor by pre-heating.

Experimental and Theoretical Study of Sorption Capacity of Hexagonal Boron Nitride Nanoparticles: Implication for Wastewater Purification from Antibiotics

The constant accumulation of antibiotics and their degradation products in wastewater as a result of human activity poses a serious threat to humanity and other living beings. To contribute to solving this important problem, hollow hexagonal boron nitride nanoparticles (BNNPs) with a spherical shape and smooth surface were synthesized, which were characterized as an efficient adsorbent for wastewater treatment from three types of antibiotics: ciprofloxacin (CIP), tetracycline (TC), and benzylpenicillin (BP). As follows from DFT calculations, the interaction of antibiotic molecules (AM) with the BN surface is neither purely physical nor purely chemical, and negative binding energy (BE) indicates that the adsorption process is spontaneous and endothermic. The calculated electron density redistributions at the AM/BN interfaces show that antibiotics interact with BN mainly through oxygen-containing groups. In addition, this interaction causes the BN surface to bend, which increases both the BE and the contact area. The removal efficiency of antibiotics (Re, %) depends on their initial concentration. At an initial concentration of 10 µg/mL, Re₅₀ and Re₁₀₀ were observed after 24 h and 14 days, respectively. With an increase in the initial concentration to 40 μg/mL, Re₅₀ and Re₁₀₀ were achieved after 5 and 28 days (with the exception of ciprofloxacin (~80% Re)). The maximum sorption capacity of BNNPs (q_e) was determined to be 297.3 mg/g (TC), 254.8 mg/g (BP), and 238.2 mg/g (CIP), which is significantly superior to many other systems. Tetracycline is adsorbed much faster than the other two antibiotics, which is confirmed by both theoretical and experimental data. Based on the results of the DFT analysis, a simple and efficient sorbent regeneration strategy was proposed, which ensures complete removal of antibiotics after 14 (BP), 21 (TC), and 10 (CIP) days. Thus, the obtained results clearly show that BNNPs are promising sorbents for various classes of antibiotics, including aminoglycosides, tetracyclines, and β-lactams.

Properties and applications of boron nitride nanotubes

Nanomaterials have received increasing attention due to their controllable physical and chemical properties and their improved performance over their bulk structures during the last years. Carbon nanostructures are one of the most widely searched materials for use in different applications ranging from electronic to biomedical because of their exceptional physical and chemical properties. However, BN nanostructures surpassed the attention of the carbon-based nanostructure because of their enhanced thermal and chemical stabilities in addition to structural similarity with the carbon nanomaterials. Among these nanostructures, one dimensional-BN nanostructures are on the verge of development as new materials to fulfill some necessities for different application areas based on their excellent and unique properties including their tunable surface and bandgap, electronic, optical, mechanical, thermal, and chemical stability. Synthesis of high-quality boron nitride nanotubes (BNNTs) in large quantities with novel techniques provided greater access, and increased their potential use in nanocomposites, biomedical fields, and nanodevices as well as hydrogen uptake applications. In this review, properties and applications of one-dimensional BN (1D) nanotubes, nanofibers, and nanorods in hydrogen uptake, biomedical field, and nanodevices are discussed in depth. Additionally, research on native and modified forms of BNNTs and also their composites with different materials to further improve electronic, optical, structural, mechanical, chemical, and biological properties are also reviewed. BNNTs find many applications in different areas, however, they still need to be further studied for improving the synthesis methods and finding new possible future applications.

A porous boron nitride nanorods-based QuEChERS analysis method for detection of five neonicotinoid pesticide residues in goji berries

To accurately determine neonicotinoid pesticide residues in goji berries, porous boron nitride nanorods (p-BNNRs) were prepared and used as a new QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) clean-up sorbent. Combined with ultrahigh-pressure liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), a modified QuEChERS method was developed to determine five neonicotinoid pesticide residues in goji berries. In goji berries, the p-BNNRs were shown to have a greater clean-up ability than typical clean-up materials (C18, PSA) The recoveries of the five targets ranged from 78.1 to 117.3% at three fortified levels, and the LODs ranged from 2.2 to 3.7 μg kg^-1. The results indicate that this approach could be successfully used to quickly determine of the five neonicotinoid insecticide residues in goji berries for risk assessment purposes, demonstrating the applicability and suitability of p-BNNRs for the routine evaluation of neonicotinoid insecticide residues in goji berries.

Cytotoxic and photocatalytic studies of hexagonal boron nitride nanotubes: a potential candidate for wastewater and air treatment

Boron nitride (BN) nanomaterials are rapidly being investigated for potential applications in biomedical sciences due to their exceptional physico-chemical characteristics. However, their safe use demands a thorough understanding of their possible environmental and toxicological effects. The cytotoxicity of boron nitride nanotubes (BNNTs) was explored to see if they could be used in living cell imaging. It was observed that the cytotoxicity of BNNTs is higher in cancer cells (65 and 80%) than in normal cell lines (40 and 60%) for 24 h and 48 h respectively. The influence of multiple experimental parameters such as pH, time, amount of catalyst, and initial dye concentration on percentage degradation efficiency was also examined for both catalyst and dye. The degradation effectiveness decreases (92 to 25%) as the original concentration of dye increases (5-50 ppm) due to a decrease in the availability of adsorption sites. Similarly, the degradation efficiency improves up to 90% as the concentration of catalyst increases (0.01-0.05 g) due to an increase in the adsorption sites. The influence of pH was also investigated, the highest degradation efficiency for MO dye was observed at pH 4. Our results show that lower concentrations of BNNTs can be employed in biomedical applications. Dye degradation properties of BNNTs suggest that it can be a potential candidate as a wastewater and air treatment material.

High-Performance Boron Nitride Based Membranes for Water Purification

In recent years, nanotechnology-based approaches have resulted in the development of new alternative sustainable technologies for water purification. Two-dimensional (2D) nanomaterials are an emerging class of materials for nanofiltration membranes. In this work, we report the production, characterisation and testing of a promising nanofiltration membrane made from water-exfoliated boron nitride (BN) 2D nanosheets. The membranes have been tested for water purification and removal of typical water-soluble dyes such as methyl orange, methylene blue and Evans blue, with the water-exfoliated BN membranes achieving retention values close to 100%. In addition, we compared the performance of membranes made from water-exfoliated BN with those produced from BN using sonication-assisted liquid exfoliation in selected organic solvents such as 2-propanol and N-methyl-2-pyrrolidone. It was found that membranes from the water-exfoliated BN showed superior performance. We believe this research opens up a unique opportunity for the development of new high-performance environmentally friendly membranes for nanofiltration and new sustainable separation technologies.

Exploiting the optical sensing of fluorophore-tagged DNA nucleobases on hexagonal BN and Al-doped BN sheets: a computational study

Hexagonal boron nitride (h-BN) sheets possess high fluorescence quenching ability and high affinity towards DNA/RNA, and they can be used as a sensing platform for rapid detection. We report the absorption and emission properties of DNA nucleobases such as adenine (A), cytosine (C), guanine (G), and thymine (T) tagged with benzoxazole on h-BN and aluminium-doped h-BN (Al_hBN) sheets. The binding affinity of studied nucleobases on h-BN sheets at the M062X/6-31G* level of theory showed the following adsorption trend: G ≥ T ≥ A > C, which is in good agreement with the previous results. The calculated stability trend of nucleobases on the Al_hBN sheet follows as C > G > A > T at the same level of theory. The physically adsorbed behavior of nucleobases to h-BN sheets was confirmed by the non-covalent interactions (NCIs) and the total density of states (TDOS) plots. The NCI results indicated that van der Waals interactions contribute significantly to the adsorption of nucleobases on h-BN sheets. Atoms in molecules (AIM) calculations revealed the electrostatic interactions between nucleobases and the Al_hBN sheet. The quenching phenomenon of nucleobase-tagged fluorophores on h-BN and Al_hBN sheets was investigated by TD-DFT calculations using the same level of theory. The thymine-tagged fluorophore upon adsorption to the pristine h-BN sheet was found to be blue-shifted (∼43 nm); however, the guanine-tagged fluorophore with Al_hBN showed a remarkable difference from other nucleobase-tagged fluorophores in the absorption and emission spectrum. Guanine-tagged fluorophores showed a smaller blue shift (∼7 nm) in the absorption spectrum; however, it showed a larger red shift (∼55 nm) than the other nucleobase-tagged fluorophores on Al_hBN sheets and can be useful in recognizing a sequence-specific phenomenon as a fluorescent biosensor of DNA and RNA to ascertain the presence of such nucleobases.

Solar-assisted isotropically thermoconductive sponge for highly viscous crude oil spill remediation

Efficiently cleaning up high-viscosity crude oil spills is still a serious global problem. In this paper, a composite filler PPy-polydopamine/BN (PPB) with high photothermal effect and high thermal conductivity was first prepared. Then the polyurethane sponge is decorated with polydimethylsiloxane and PPB to obtain a solar-assisted isotropically thermoconductive adsorbent (PPB@PU), which exhibits remarkable stability and durable mechanical properties. Meanwhile, the PPB@PU sponge has good thermal conductivity, and its surface temperature rises to 91°C in just 1 min under irradiation (1 sun). Therefore, the PPB@PU sponge can quickly heat and adsorb the crude oil contacted by the surface, significantly speed up the crude oil recovery process, and the adsorption capacity is as high as about 45 g/g. Finally, the oil adsorption method of the three-dimensional adsorbent is demonstrated, which provides a new idea for the subsequent development of advanced oil spill adsorbent.

•

PPB@PU sponge exhibits good superhydrophobic/lipophilicity and mechanical stability

•

PPB@PU sponge has outstanding photothermal conversion and thermal conductivity

•

PPB@PU sponge can efficiently recover heavy oil for large-scale oil spill cleanup

Boron nitride-based materials for water purification: Progress and outlook

Analogous to the carbon family, boron nitride (BN)-based materials have gained considerable attention in recent times for applications in various fields. Owing to their extraordinary characteristics, i.e., high surface area, low density, superior thermal stability, mechanical strength, and conductivity, excellent corrosion, and oxidation resistance, the BN nanomaterials have been explored in water remediation. This article critically evaluates the latest development in applications of BN-based materials in water purification with focus on adsorption, synthesis of novel membranes and photocatalytic degradation of pollutants. The adsorption of various noxious pollutants, i.e., dyes, organic compounds, antibiotics, and heavy metals from aqueous medium BN-based materials are described in detail by illustrating the adsorption mechanism and regeneration potential. The major hurdles and opportunities related to the synthesis and water purification applications of BN-based materials are underscored. Finally, a roadmap is suggested for future research to assure the effective applications of BN-based materials in water purification. This review is beneficial in understanding the current status of these unique materials in water purification and accelerating the research focusing their future water remediation applications.

Boron nitride-palladium nanostructured catalyst: efficient reduction of nitrobenzene derivatives in water

Boron nitride (BN) supported palladium (Pd) nanostructured catalyst, as an alternative support for heterogeneous reduction of nitrobenzene derivatives, was prepared by a mild reduction of a Pd precursor in water. The structural characteristics and distribution of the synthesized Pd nanoparticles (NPs) on BN support were investigated by transmission electron microscopy, scanning transmission electron microscopy, energy-dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy methods. The potential and efficiency of the BN supported Pd NPs as an active and stable nanostructured catalyst were verified in the reduction of nitroaromatics. Excellent yields of the corresponding aryl amines in water were obtained and due discussion were included about the catalytic activity of the synthesized catalyst. It was also indicated that the nanostructured catalyst can be recycled at least for six consecutive cycles in the reduction of nitrobenzene, without losing significant activity.

Porous Boron Nitride Materials: Influence of Structure, Chemistry and Stability on the Adsorption of Organics

Porous boron nitride (BN) is structurally analogous to activated carbon. This material is gaining increasing attention for its potential in a range of adsorption and chemical separation applications, with a number of recent proof-of-concept studies on the removal of organics from water. Today though, the properties of porous BN-i.e., surface area, pore network, chemistry-that dictate adsorption of specific organics remain vastly unknown. Yet, they will need to be optimized to realize the full potential of the material in the envisioned applications. Here, a selection of porous BN materials with varied pore structures and chemistries were studied for the adsorption of different organic molecules, either directly, through vapor sorption analyses or as part of a water/organic mixture in the liquid phase. These separations are relevant to the industrial and environmental sectors and are envisioned to take advantage of the hydrophobic character of the BN sheets. The materials were tested and regenerated and their physical and chemical features were characterized before and after testing. This study allowed identifying the adsorption mechanisms, assessing the performance of porous BN compared to benchmarks in the field and outlining ways to improve the adsorption performance further.

Porous boron nitride nanoribbons with large width as superior adsorbents for rapid removal of cadmium and copper ions from water

Porous boron nitride nanoribbons with large width and their possible mechanism for the removal of heavy metals.

Template-free synthesis of three dimensional porous boron nitride nanosheets for efficient water cleaning

Preparation of efficient and reusable adsorption materials for water treatment and purification is still remarkably challenging. In this paper, three dimensional porous boron nitride nanosheets (3D porous BNNSs) with high chemical stability and excellent adsorption capacity for organic dyes have been successfully synthesized through a template-free route. The 3D porous BNNSs consist of uniform nanosheets with average diameter of about 200 nm and thickness of about 3 nm. The adsorption conditions have been optimized by varying the experimental parameters such as initial dye concentration, solution pH, contact time, etc. As expected, the 3D porous BNNSs exhibit superior adsorption activity toward methylene blue (MB) in aqueous solution: more than 95.3% of the dye can be removed within 5 min compared with the adsorption efficiency of 10% for conventional activated carbon and 67.5% for the 3D porous BNNSs reported previously at pH 8.0 and 30 °C. The unique 3D structure and high density adsorption sites are believed to play a key role in the efficient removal performance. Moreover, about 94.5% of the starting adsorption capacity is maintained after ten adsorption-regeneration cycles. With the high adsorption efficiency and reusability performance, the 3D porous BNNSs are suitable for water cleaning and meet the requirement of mass production.

Adsorption of estrone with few-layered boron nitride nanosheets: Kinetics, thermodynamics and mechanism

Boron nitride Nanosheets (BNNSs) was fabricated with a method of heating the mixture of boric acid and urea in N₂ atmosphere and used to remove estrone (E₁) from water. The obtained BNNSs exhibited a higher surface area of 896 m²/g, a large pore volume of 0.76 cm³/g, and only few layers (0.398 nm) with the boric acid and urea ratio of 1:80. The layer number of BNNSs decreased from 15 to 4 with the mole ratio of boric acid and urea decreasing from 1:20 to 1:80, which was identified by SEM, TEM, AFM and BET measurements. More importantly, BNNSs presented an outstanding adsorption performance for estrone with the adsorption capacity of 249.15 mg E₁/g BNNSs. The adsorption process could be best fitted by pseudo second-order kinetic model and the equilibrium data at different temperatures were well fitted by Langmuir isotherm model. The thermodynamics analysis revealed that E₁ adsorption on BNNSs was spontaneous (ΔG = -29.33 kJ mol^-1), enthalpy-retarded (ΔH = 29.75 kJ mol^-1), entropy-driven (ΔS = 198.26 J mol^-1 K^-1), and mostly chemical adsorption. The adsorption rates of E₁ in water were sharply enhanced with thinner BNNSs as absorbents and removal efficiency by BN-60 regenerated after 6 times was above 95%, it was shown that the surface areas, mesopores and remarkable structure played important roles in the adsorption process. The firmness of E₁ onto BNNSs and the stability of adsorption efficiency made BNNSs as a potential absorbent for efficient removal of E₁ from wastewater.

Intracellular toxicity exerted by PCBs and role of VBNC bacterial strains in biodegradation

Polychlorinated biphenyls (PCBs) are xenobiotic compounds that persists in the environment for long-term, though its productivity is banned. Abatement of the pollutants have become laborious due to it's recalcitrant nature in the environment leading to toxic effects in humans and other living beings. Biphenyl degrading bacteria co-metabolically degrade low chlorinated PCBs using the active metabolic pathway. bph operon possess different genetic arrangements in gram positive and gram negative bacteria. The binding ability of the genes and the active sites were determined by PCB docking studies. The active site of bphA gene with conserved amino acid residues determines the substrate specificity and biodegradability. Accumulation of toxic intermediates alters cellular behaviour, biomass production and downturn the metabolic activity. Several bacteria in the environment attain unculturable state which is viable and metabolically active but not cultivable (VBNC). Resuscitation-promoting factor (Rpf) and Rpf homologous protein retrieve the culturability of the so far uncultured bacteria. Recovery of this adaptive mechanism against various physical and chemical stressors make a headway in understanding the functionality of both environmental and medically important unculturable bacteria. Thus, this paper review about the general aspects of PCBs, cellular toxicity exerted by PCBs, role of unculturable bacterial strains in biodegradation, genes involved and degradation pathways. It is suggested to extrapolate the research findings on extracellular organic matters produced in culture supernatant of VBNC thus transforming VBNC to culturable state.

Novel multifunctional cheese-like 3D carbon-BN as a highly efficient adsorbent for water purification

In this paper, a novel three dimensional carbon boron nitride (3D C-BN) was successfully prepared. The obtained material has porous cheese-like structure and pore size ranging from 2 nm to 100 nm. Attractively, the 3D C-BN, which combines the adsorption advantages of BN and carbon together, exhibits excellent adsorption properties for organic dyes, oils and heavy metal ions. The maximum removal capacities of 3D C-BN for methyl blue (MB) and congo red (CR) are 408 mg g⁻¹ and 307 mg g⁻¹, respectively. Furthermore, 3D C-BN can quickly and efficiently remove oils (salad oil, gasoline and pump oil) and heavy metal ions (Cr³⁺, Cd²⁺ and Ni²⁺) from waste water. The macro bulk 3D C-BN, which is more convenient to use than powdered materials, can be reused by burning or heating in air and still maintains high adsorption capacity. Significantly, these superior performances can find practical application in water purification.

Copper catalyzed growth of hexagonal boron nitride nanotubes on a tungsten substrate

Copper nanoparticles were introduced as the catalyst for the direct growth of BNNTs on a metallic substrate leading to their direct application in electronics.

Hexagonal boron nitride nanosheets as a multifunctional background-free matrix to detect small molecules and complicated samples by MALDI mass spectrometry

h-BN nanosheets were applied as a background-free matrix for the analysis and imaging of small molecules and as an adsorbent to enrich samples.

Microwave-assisted rapid synthesis of graphene-analogue hexagonal boron nitride (h-BN) nanosheets and their application for the ultrafast and selective adsorption of cationic dyes from aqueous solutions

Graphene-analogue hexagonal boron nitride (h-BN) nanosheets are successfully synthesizedviaa facile and fast microwave-assisted method in 10 min and used as a novel adsorbent for the ultrafast removal of cationic organic dyes in aqueous solution.

Porous boron nitride coupled with CdS for adsorption–photocatalytic synergistic removal of RhB

Adsorption–photocatalytic synergistic removal of organic pollutants based on porous BN coupled with a small amount of CdS.

Boron nitride nanoplates supported zero-valent iron nanocomposites for enhanced decolorization of methyl orange with the assistance of ultrasonic irradiation

In this work, boron nitride nanoplates (BNNPs) supported nanoscale zero-valent iron (nZVI) was prepared through facile liquid-phase chemical reduction of ferric ion by borohydride under ambient conditions in the presence of BNNPs. The nZVI@BNNPs hybrids were characterized by scanning electron microscopy, X-ray diffraction and magnetic properties measurement. The hybrid material was evaluated for decolorization of a common azo dye, methyl orange (MO), with the assistance of ultrasonic irradiation. Results exhibited that a complete decolorization of 100 mg/L MO was achieved within 6 min using nZVI@BNNPs as the active material. Compared with bare nZVI and BNNPs, nZVI@BNNPs provided a faster reaction process for MO decolorization. The kinetic rate constants of MO decolorization reached 0.8175 min(-1) under ultrasound-assisted condition due to the synergistic effect of ultrasonic irradiation. Fluorescence spectrum experiment confirmed that hydroxyl radicals could be generated in the system combined nZVI with ultrasonic irradiation, and as a result, hydroxyl radicals would contribute to the decolorization process of MO.

An amperometric glucose enzyme biosensor based on porous hexagonal boron nitride whiskers decorated with Pt nanoparticles

A novel amperometric electrode is fabricated using platinum nanoparticle (Pt NP) decorated porous hexagonal boron nitride (h-BN) whiskers.

Three-dimensional carbon boron nitrides with a broken, hollow, spherical shell for water treatment

Broken hollow spherical shell like 3D C-BNs with a very fast dye adsorption rate for water purification.

Controllable synthesis of few-layered and hierarchically porous boron nitride nanosheets

Few-layered porous boron nitride nanosheets prepared using MgB₂ as a dynamic template show good CO₂ adsorption selectivity.

Nanosheet-structured boron nitride spheres with a versatile adsorption capacity for water cleaning

Here, we report the synthesis of nanosheet-structured boron nitride spheres (NSBNSs) by a catalyzing thermal evaporation method from solid B powders. The NSBNSs consist of radially oriented ultrathin nanosheets with the sheet edges oriented on the surface. Formation of this unique structure occurs only at a certain reaction temperature. The diameter from 4 μm to 700 nm and the nanosheet thickness from 9.1 to 3.1 nm of the NSBNSs can be well-controlled by appropriately changing the mass ratio of boron powders and catalyst. The NSBNSs possess versatile adsorption capacity, exhibiting excellent adsorption performance for oil, dyes, and heavy metal ions from water. The oil uptake reaches 7.8 times its own weight. The adsorption capacities for malachite green and methylene blue are 324 and 233 mg/g, while those for Cu(2+), Pb(2+), and Cd(2+) are 678.7, 536.7, and 107.0 mg/g, respectively. The adsorption capacities of the NSBNSs for Cu(2+) and Pb(2+) are higher or much higher than those of the adsorbents reported previously. These results demonstrate the great potential of NSBNSs for water treatment and cleaning.

One pot synthesis of mesoporous boron nitride using polystyrene-b-poly(ethylene oxide) block copolymer

We report a successful synthesis of Mesoporous Boron Nitride (MBN) powder through a facile one-pot synthesis strategy.

An effective route for the synthesis of boron nitride micro-nano structures and the growth mechanism

Boron nitride (BN) nanosheet-assembled microwires were successfully synthesized on the large scale and with high purity via an efficient method.

Soft template mediated synthesis of Bi–In–Zn–S and its efficient visible-light-driven decomposition of methylene blue

Bi–In–Zn–S nanostructures were successfully synthesized in PEG-PPG-PEG at various temperatures and are used as recyclable photocatalysts for the degradation of methylene blue under visible light (sunlight and 200 W tungsten lamp).

Polymer-Derived Boron Nitride: A Review on the Chemistry, Shaping and Ceramic Conversion of Borazine Derivatives

Boron nitride (BN) is a III-V compound which is the focus of important research since its discovery in the early 19th century. BN is electronic to carbon and thus, in the same way that carbon exists as graphite, BN exists in the hexagonal phase. The latter offers an unusual combination of properties that cannot be found in any other ceramics. However, these properties closely depend on the synthesis processes. This review states the recent developments in the preparation of BN through the chemistry, shaping and ceramic conversion of borazine derivatives. This concept denoted as Polymer-Derived Ceramics (PDCs) route allows tailoring the chemistry of precursors to elaborate complex BN shapes which cannot be obtained by conventional process. The effect of the chemistry of the molecular precursors, i.e., borazine and trichloroborazine, and their polymeric derivatives i.e., polyborazylene and poly[tri(methylamino)borazine], in which the specific functional groups and structural motifs determine the shaping potential by conventional liquid-phase process and plastic-forming techniques is discussed. Nanotubes, nano-fibers, coatings, monoliths and fiber-reinforced matrix composites are especially described. This leads to materials which are of significant engineering interest.

Ultrathin-shell boron nitride hollow spheres as sorbent for dispersive solid-phase extraction of polychlorinated biphenyls from environmental water samples

Boron nitride hollow spheres with ultrathin-shells were synthesized and used as sorbents for dispersive solid-phase extraction of aromatic pollutants at trace levels from environmental water samples. Polychlorinated biphenyls (PCBs) were selected as target compounds. Sample quantification and detection were performed by gas chromatography-tandem mass spectrometry. Extraction parameters influencing the extraction efficiency were optimized through response surface methodology using the Box-Behnken design. The proposed method achieved good linearity within the concentration range of 0.15-250 ng L(-1) PCBs, low limits of detection (0.04-0.09 ng L(-1), S/N=3:1), good repeatability of the extractions (relative standard deviation, <12%, n=6), and satisfactory recoveries between 84.9% and 101.0% under optimal conditions. Real environmental samples collected from rivers, local lakes, rain and spring waters were analyzed using the developed method. Results demonstrated that the hexagonal boron nitride-based material has significant potential as a sorbent for organic pollutant extraction from environmental water samples.

Template-free synthesis of functional 3D BN architecture for removal of dyes from water

Three-dimensional (3D) architectures are of interest in applications in electronics, catalysis devices, sensors and adsorption materials. However, it is still a challenge to fabricate 3D BN architectures by a simple method. Here, we report the direct synthesis of 3D BN architectures by a simple thermal treatment process. A 3D BN architecture consists of an interconnected flexible network of nanosheets. The typical nitrogen adsorption/desorption results demonstrate that the specific surface area for the as-prepared samples is up to 1156 m² g⁻¹, and the total pore volume is about 1.17 cm³ g⁻¹. The 3D BN architecture displays very high adsorption rates and large capacities for organic dyes in water without any other additives due to its low densities, high resistance to oxidation, good chemical inertness and high surface area. Importantly, 88% of the starting adsorption capacity is maintained after 15 cycles. These results indicate that the 3D BN architecture is potential environmental materials for water purification and treatment.

Porous Boron Nitride with Tunable Pore Size

On the basis of a global structural search and first-principles calculations, we predict two types of porous boron-nitride (BN) networks that can be built up with zigzag BN nanoribbons (BNNRs). The BNNRs are either directly connected with puckered B (N) atoms at the edge (type I) or connected with sp(3)-bonded BN chains (type II). Besides mechanical stability, these materials are predicted to be thermally stable at 1000 K. The porous BN materials entail large surface areas, ranging from 2800 to 4800 m(2)/g. In particular, type-II BN material with relatively large pores is highly favorable for hydrogen storage because the computed hydrogen adsorption energy (-0.18 eV) is very close to the optimal adsorption energy (-0.15 eV) suggested for reversible hydrogen storage at room temperature. Moreover, the type-II materials are semiconductors with width-dependent direct bandgaps, rendering the type-II BN materials promising not only for hydrogen storage but also for optoelectronic and photonic applications.

Adsorption of nucleobase pairs on hexagonal boron nitride sheet: hydrogen bonding versus stacking

The adsorption of hydrogen-bonded and stacked nucleobase pairs on the hexagonal boron nitride (h-BN) surface was studied by density functional theory and molecular dynamics methods. Eight types of nucleobase pairs (i.e., GG, AA, TT, CC, UU, AT, GC, and AU) were chosen as the adsorbates. The adsorption configurations, interaction energies, and electronic properties of the nucleobase pair on the h-BN surface were obtained and compared. The density of states analysis result shows that both the hydrogen-bonded and stacked nucleobase pairs were physisorbed on h-BN with minimal charge transfer. The hydrogen-bonded base pairs lying on the h-BN surface are significantly more stable than the stacked forms in both the gas and water phase. The molecular dynamics simulation result indicates that h-BN possessed high sensitivity for the nucleobases and the h-BN surface adsorption could revert the base pair interaction from stacking back to hydrogen bonding in aqueous environment. The h-BN surface could immobilize the nucleobases on its surface, which suggests the use of h-BN has good potential in DNA/RNA detection biosensors and self-assembly nanodevices.