Electron-deficient cyclopropenium cations as Lewis acids in FLP chemistry

Cyclopropenium cations incorporating electron deficient substituents are Lewis acidic despite the presence of π-electrons. The chloride and electron affinities are examined computationally and experimentally, respectively. These cations form classic Lewis acid-base adducts with PPh3, while sterically demanding phosphines yield frustrated Lewis pairs (FLPs) which participate in FLP additions. Depending on the basicity of the phosphine used, addition to alkynes or alkyne deprotonation is observed. In either case, new C-C bonds are formed, thus extending the utility of the concept of FLP chemistry to these delocalized π-cations.

Does thermotropic liquid crystalline self-assembly control biological activity in amphiphilic amino acids? - tyrosine ILCs as a case study

Amphiphilic amino acids represent promising scaffolds for biologically active soft matter. In order to understand the bulk self-assembly of amphiphilic amino acids into thermotropic liquid crystalline phases and their biological properties a series of tyrosine ionic liquid crystals (ILCs) was synthesized, carrying a benzoate unit with 0-3 alkoxy chains at the tyrosine unit and a cationic guanidinium head group. Investigation of the mesomorphic properties by polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray diffraction (WAXS, SAXS) revealed smectic A bilayers (SmA_d) for ILCs with 4-alkoxy- and 3,4-dialkoxybenzoates, whereas ILCs with 3,4,5-trisalkoxybenzoates showed hexagonal columnar mesophases (Col_h), while different counterions had only a minor influence. Dielectric measurements revealed a slightly higher dipole moment of non-mesomorphic tyrosine-benzoates as compared to their mesomorphic counterparts. The absence of lipophilic side chains on the benzoate unit was important for the biological activity. Thus, non-mesomorphic tyrosine benzoates and crown ether benzoates devoid of additional side chains at the benzoate unit displayed the highest cytotoxicities (against L929 mouse fibroblast cell line) and antimicrobial activity (against Escherichia coli ΔTolC and Staphylococcus aureus) and promising selectivity ratio in favour of antimicrobial activity.

Bis(amino)cyclopropenium Ion as a Hydrogen-Bond Donor Catalyst for 1,6-Conjugate Addition Reactions

The catalytic application of the bis(amino)cyclopropenium ion has been investigated in conjugate addition reactions. The hydrogen atom, which is attached to the cyclopropene ring of bis(amino)cyclopropenium salts, is moderately acidic and can potentially serve as a hydrogen-bond donor catalyst in some organic transformations. This hypothesis has been successfully realized in the 1,6-conjugate addition reactions of p-quinone methides with various nucleophiles such as indole, 2-naphthol, thiols, phenols, and so forth. The spectroscopic studies (NMR and UV-vis) as well as the deuterium isotope labeling studies clearly revealed that the hydrogen atom (C-H) that is present in the cyclopropene ring of the catalyst is indeed solely responsible for catalyzing these transformations. In addition, these studies also strongly indicate that the C-H hydrogen of the cyclopropene ring activates the carbonyl group of the p-quinone methide through hydrogen bonding.

Trisaminocyclopropenium Cations as Small-Molecule Organic Fluorophores: Design Guidelines and Bioimaging Applications

The discovery of fluorescence two centuries ago ushered in, what is today, an illuminating field of science rooted in the rational design of photochromic molecules for task-specific bio-, material-, and medical-driven applications. Today, this includes applications in bioimaging and diagnosis, photodynamic therapy regimes, in addition to photovoltaic devices and solar cells, among a vast multitude of other usages. In furthering this indispensable area of daily life and modern-day scientific research, we report herein the synthesis of a class of trisaminocyclopropenium fluorophores along with a systematic investigation of their unique molecular and electronic dependent photophysical properties. Among these fluorophores, tris[N(naphthalen-2-ylmethyl)phenylamino] cyclopropenium chloride (TNTPC) displayed a strong photophysical profile including a 0.92 quantum yield ascribed to intramolecular charge transfer and intramolecular through-space conjugation. Moreover, this cyclopropenium-based fluorophore functions as a competent imaging agent for DNA visualization and nuclear counterstaining in cell culture. To facilitate the broader use of these compounds, design principles supported by density functional theory calculations for engineering analogs of this class of fluorophores are offered. Collectively, this study adds to the burgeoning interest in cyclopropenium compounds and their unique properties as fluorophores with uses in bioimaging applications.

A Discrete Chloride Monohydrate: A Solid-State Structural and Spectroscopic Characterization

The solid-state structure of a discrete chloride monohydrate species, [Cl(H₂O)]^-, is reported for the first time. It was isolated as a salt of the tris(dipropylamino)cyclopropenium cation and has been structurally characterized by X-ray and neutron diffraction. Infrared (IR), far-infrared, and Raman spectroscopic studies were also carried out. Additionally, the D₂O and HDO isotopomers were investigated. Of the six fundamental vibrational modes, only the out-of-plane bend ν₃ was not observed as it forms an IR- and Raman-inactive local mode phonon.

Asymmetric trisalkylamine cyclopropenium derivatives with antimicrobial activity

Cationic molecules are found in abundance as antimicrobial agents with a well-defined mechanism of action and significant therapeutic benefits. Quaternary ammonium-containing compounds are frequently employed due to their facile synthesis and tunable properties. Over time, however, bacterial resistance to these compounds has become a significant obstacle. We report here a series of asymmetric trisalkylamine cyclopropenium cationic derivatives as chemical isosteres of quaternary ammonium compounds, capable of strong antimicrobial activity and overcoming microbial resistance. These small molecules were prepared by one-pot reaction of tetrachlorocyclopropene (TCC) with unhindered secondary amines in the presence of Hünig's base. In this work we describe the synthesis, purification, and characterization of five trisamino-cyclopropenium derivatives and confirm their structures by spectral analysis and mass-spectrometry. Three of the compounds displayed considerable antimalarial activity (IC₅₀ < 0.1 µM) without demonstrating significant toxic effects in vitro (TC₅₀ > 1 µM). This class of cyclopropenium-based compounds provides an opening for the discovery of potent and non-toxic antimicrobial agents.

Self-Assembly of Aminocyclopropenium Salts: En Route to Deltic Ionic Liquid Crystals

Aminocyclopropenium ions have raised much attention as organocatalysts and redox active polymers. However, the self-assembly of amphiphilic aminocyclopropenium ions remains challenging. The first deltic ionic liquid crystals based on aminocyclopropenium ions have been developed. Differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction provided insight into the unique self-assembly and nanosegregation of these liquid crystals. While the combination of small headgroups with linear p-alkoxyphenyl units led to bilayer-type smectic mesophases, wedge-shaped units resulted in columnar mesophases. Upon increasing the size and polyphilicity of the aminocyclopropenium headgroup, a lamellar phase was formed.

Rational Synthesis, Structures and Properties of the Ionic Liquid Binary Iodine-Bromine Octahalide Series [In Br8-n ]2- (n=0, 2, 3, 4)

A series of octanuclear iodine-bromine interhalides [I_n Br_8-n ]^2- (n=0, 2, 3, 4) were prepared systematically in two steps. Firstly, addition of a dihalogen (Br₂ or IBr) to the triaminocyclopropenium bromide salt [C₃ (NEt₂ )₃ ]Br forms the corresponding trihalide salt with Br₃ ^- or IBr₂ ^- anions, respectively. Secondly, addition to Br₃ ^- of half an equivalent of Br₂ gives the octabromine polyhalide [Br₈ ]^2- , whereas addition to IBr₂ ^- of half an equivalent of Br₂ , IBr or I₂ gives the corresponding interhalides: [I₂ Br₆ ]^2- , [I₃ Br₅ ]^2- , and [I₄ Br₄ ]^2- , respectively. The four octahalides were characterized by X-ray crystallography, computational studies, Raman and Far-IR spectroscopies, as well as by TGA and melting point. All of the salts were found to be ionic liquids.

Fluoride Ionic Liquids in Salts of Ethylmethylimidazolium and Substituted Cyclopropenium Cation Families

A series of solvent-stabilized ionic liquid fluorides were prepared, [EMIM]F.nCH3COOH n = 1. 0, 1.6, 2.1, 2.4, and 3.2, either via exchange from the chloride salt using KF or AgF, or by neutralization of the hydroxide salt using HF. Azeotrope drying was used to remove water. Their viscosity, conductivity and density properties were determined. A diethanol solvate of the triaminocyclopropenium salt [C3(NPr2)3]F was found to be stable and its viscosity, conductivity and density properties were also determined. The monoethanol solvate, however, was found to be unstable with trace water present. Intramolecular stabilization of fluoride was achieved by using OH functionalized cations: [C3(NEt2)2N(CH2CH2OH)2]F, [C3(N(CH2CH2OH)2)3]F, and [Me3NCH2CH2OH]F.H2O, The first of these is an ionic liquid at ambient temperature and has a TGA mass loss onset at 175°C, indicating a useful range of liquid state stability.

Chiral protic imidazolium salts with a (-)-menthol fragment in the cation: synthesis, properties and use in the Diels-Alder reaction

New chiral protic imidazolium salts containing a (1R,2S,5R)-(-)-menthol substituent in the cation and four different anions (chloride, hexafluorophosphate, trifluoromethanesulfonate and bis(trifluoromethylsulfonyl)imide) were efficiently prepared and extensively characterized. Detailed NMR analysis was performed, and a comparison of the chemical shifts of the protons and carbons of the imidazolium cation as a function of the combined anion was discussed. The specific rotation, solubility in commonly used solvents, thermal properties including phase transition temperatures, and thermal stability were also determined. Three of the synthesized tertiary salts (Cl, PF6 or OTf anion) were crystalline solids; 1-H-3-[(1R,2S,5R)-(-)-menthoxymethyl]-imidazolium bis(trifluoromethylsulfonyl)imide, (-)[H-Ment-Im][NTf2] was a liquid at room temperature. The chiral protic salts were used in a Diels-Alder reaction as a test reaction, and the results were compared with those from aprotic chiral ionic liquids having the same chiral substituent in the cation (1R,2S,5R)-(-)-menthol with a bis(trifluoromethylsulfonyl)imide anion. Both protic and aprotic chiral salts, used in a Diels-Alder reaction, were pure (-)-enantiomers, which was determined by NMR with Δ-TRISPHAT tetrabutylammonium salt as a chiral shift reagent. Protic salts offered distinctly higher endo/exo ratios than aprotic ones, but an enantiomeric excess was not obtained. The stereoselectivity reached the same high level even after the fourth recycle of (-)[H-Ment-Im][NTf2] in the reaction of ethyl-vinyl ketone with cyclopentadiene at temperature of -35 °C.

Synthesis and physical properties of tris(dialkylamino)cyclopropenium dicyanamide ionic liquids

The synthesis and properties of 16 tris(dialkylamino)cyclopropenium (TDAC) cations with the dicyanamide (DCA) anion, [N(CN)₂]⁻, are described. D_3h- and C_3h-symmetric cations ([C₃(NR₂)₃]DCA (R = Me, Et, Pr, Bu, Pent, Hex, Dec) and [C₃(NRMe)₃]DCA (R = Bu, St), respectively) were synthesised by reaction of C₃Cl₅H with the corresponding amine. Reaction of the alkoxydiaminocyclopropenium salt [C₃(NEt₂)₂(OMe)]⁺ with amines led to a series of C_2v-symmetric salts [C₃(NEt₂)₂(NR₂)]DCA (R = Me, Bu, Hex) and two C_s-symmetric salts and [C₃(NEt₂)₂(NRMe)]DCA (R = Me, Bu). Similarly, [C₃(NMe₂)₂(OMe)]⁺, was used to prepare the C_s-symmetric salts [C₃(NMe₂)₂(NRMe)]DCA (R = Pr, Bu). In addition to characterisation by NMR, mass spectrometry and microanalysis, the salts were characterised by DSC, TGA, density, viscosity, conductivity and miscibility/solubility studies. Comparisons have been made with similar series of bistriflimide (NTf₂⁻) salts that have been previously reported to see whether the same trends are observed with a different anion.

An investigation of symmetry (D_3h, C_3h, C_2v and C_s) and alkyl chain length (6–60 alkyl carbon atoms) effects on the physical properties of peralkylated triaminocyclopropenium dicyanamide salts.

Clickable Poly(ionic liquids): A Materials Platform for Transfection

The potential applications of cationic poly(ionic liquids) range from medicine to energy storage, and the development of efficient synthetic strategies to target innovative cationic building blocks is an important goal. A post-polymerization click reaction is reported that provides facile access to trisaminocyclopropenium (TAC) ion-functionalized macromolecules of various architectures, which are the first class of polyelectrolytes that bear a formal charge on carbon. Quantitative conversions of polymers comprising pendant or main-chain secondary amines were observed for an array of TAC derivatives in three hours using near equimolar quantities of cyclopropenium chlorides. The resulting TAC polymers are biocompatible and efficient transfection agents. This robust, efficient, and orthogonal click reaction of an ionic liquid, which we term ClickabIL, allows straightforward screening of polymeric TAC derivatives. This platform provides a modular route to synthesize and study various properties of novel TAC-based polymers.

Macrosteres: The Deltic Guanidinium Ion

The "deltic guanidinium" ion is described here as a "macrostere" of the guanidinium ion. The use of the 2,4-dimethoxybenzyl protecting group allows for the synthesis of the fully unsubstituted parent compound and a variety of derivatives bearing multiple N-H functions for the first time. Deltic urea, deltic thiourea, and deltic benzamidine are also synthesized. A comparison of the physical properties of guanidinium and deltic guanidinium ions is provided. The use of a deltic guanidinium dendrimer for cell transport is demonstrated.

Synthesis, characterization and properties of amino acid ionic liquids derived from the triaminocyclopropenium cation

Amino acid ionic liquids based on the triaminocyclopropenium cation form a variety of structural types depending on the amino acid. Dications were obtained with Lys, His, Arg, and Cys.

Phase-transfer and other types of catalysis with cyclopropenium ions

This work establishes the cyclopropenium ion as a viable platform for efficient phase-transfer catalysis of a diverse range of organic transformations. The amenability of these catalysts to large-scale synthesis and structural modification is demonstrated. Evaluation of the molecular structure of an optimal catalyst reveals some unique structural features of these systems. Finally, a discussion of electronic charge distribution underscores an important consideration for catalyst design.

The evolution of cyclopropenium ions into functional polyelectrolytes

Versatile polyelectrolytes with tunable physical properties have the potential to be transformative in applications such as energy storage, fuel cells and various electronic devices. Among the types of materials available for these applications, nanostructured cationic block copolyelectrolytes offer mechanical integrity and well-defined conducting paths for ionic transport. To date, most cationic polyelectrolytes bear charge formally localized on heteroatoms and lack broad modularity to tune their physical properties. To overcome these challenges, we describe herein the development of a new class of functional polyelectrolytes based on the aromatic cyclopropenium ion. We demonstrate the facile synthesis of a series of polymers and nanoparticles based on monomeric cyclopropenium building blocks incorporating various functional groups that affect physical properties. The materials exhibit high ionic conductivity and thermal stability due to the nature of the cationic moieties, thus rendering this class of new materials as an attractive alternative to develop ion-conducting membranes.

Synthesis and physical properties of tris(dialkylamino)cyclopropenium bistriflamide ionic liquids

An investigation of symmetry (D_3h, C_3h, C_2v and C_s) and alkyl chain length (6–60 alkyl carbon atoms) effects on the physical properties of peralkylated triaminocyclopropenium bistriflamide salts.

Rapid and efficient functionalized ionic liquid-catalyzed aldol condensation reactions associated with microwave irradiation

Five quaternary ammonium ionic liquid (IL) and two tetrabutylphosphonium ILs were prepared and characterized. An environmentally benign and convenient functionalized ionic liquid catalytic system was thus explored in the aldol condensation reactions of aromatic aldehydes with acetone. The aldol reactions proceeded more efficiently through microwave-assisted heating than through conventional thermal heating. The yield of products obtained under microwave heating for 30 min was approximately 90%, and the ILs can be recovered and reused at least five times without apparent loss of activity. In addition, this catalytic system can be successfully extended to the Henry reactions.