Direct Detection of Long-Range Interdomain Auger Recombination in Dumbbell-Shaped Quasi-Type-II Nanoparticle

Multicarrier dynamics in heterostructured ZnS-AgInS₂ (ZAIS) dumbbell-like nanoparticle (nanodumbell), which consists of two visible-light absorptive domains (ellipsoidal tip domains) directly linked to each end of a 22 nm length rod domain of the ZAIS nanodumbell with a quasi-type-II heterostructure, was investigated by femtosecond transient absorption spectroscopy under variable excitation intensities. Quantitative analysis together with the numerical simulations for the excitation intensity dependence of the dynamics revealed that only one electron-hole pair survived in the overall dumbbell as a consequence of Auger recombination, even though multiple carriers were formed on both terminal tip domains. This result strongly suggested carrier-carrier interaction between the tip domains, leading to the long-range Auger recombination via tunneling across a rod potential barrier.

Rapid electrochemical quantification of trace Hg2+ using a hairpin DNA probe and quantum dot modified screen-printed gold electrodes

Rapid, simple, sensitive and specific approaches for mercury(ii) (Hg²⁺) detection are essential for toxicology assessment, environmental protection, food analysis and human health. In this study, a ratiometric hairpin DNA probe based electrochemical biosensor, which relies on hairpin DNA probes conjugated with water-soluble and carboxyl functionalized quaternary Zn–Ag–In–S quantum dot (QD) on screen-printed gold electrodes (SPGE), referred to as the HP-QDs-SPGE electrochemical biosensor in this study, was developed for Hg²⁺ detection. Based on the “turn-off” reaction of a hairpin DNA probe binding with a mismatched target and Hg²⁺ through the formation of T–Hg²⁺–T coordination, the HP-QDs-SPGE electrochemical biosensor can rapidly quantify trace Hg²⁺ with high ultrasensitivity, specificity, repeatability and reproducibility. The conformational change of the hairpin DNA probe caused a significant decrease in electrochemical intensity, which could be used for the quantification of Hg²⁺. The linear dynamic range and high sensitivity of the HP-QDs-SPGE electrochemical biosensor for the detection of Hg²⁺ was studied in vitro, with a broad linear dynamic range of 10 pM to 1 μM and detection limits of 0.11 pM. In particular, this HP-QDs-SPGE electrochemical biosensor showed excellent selectivity toward Hg²⁺ ions in the presence of other metal ions. More importantly, this biosensor has been successfully used to detect Hg²⁺ in deionized water, tap water, groundwater and urine samples with good recovery rate and small relative standard deviations. In summary, the developed HP-QDs-SPGE electrochemical biosensor exhibited promising potential for further applications in on-site analysis.

A ratiometric hairpin DNA probe based electrochemical biosensor, which relies on hairpin DNA probes conjugated with water-soluble and carboxyl functionalized quantum dot on screen-printed gold electrodes, was developed for Hg²⁺ detection.

One-Step Aqueous Synthesis of Anionic and Cationic AgInS2 Quantum Dots and Their Utility in Improving the Efficacy of ALA-Based Photodynamic Therapy

Silver-indium-sulfide quantum dots (AIS QDs) have potential applications in many areas, including biomedicine. Their lack of regulated heavy metals, unlike many commercialized QDs, stands out as an advantage, but the necessity for alloyed or core-shell structures and related costly and sophisticated processes for the production of stable and high quantum yield aqueous AIS QDs are the current challenges. The present study demonstrates the one-step aqueous synthesis of simple AgInS2 QD compositions utilizing for the first time either a polyethyleneimine/2-mercaptopropionic acid (AIS-PEI/2MPA) mixture or only 2-mercaptopropionic acid (AIS-2MPA) as the stabilizing molecules, providing a AgInS2 portfolio consisting of cationic and anionic AIS QDs, respectively, and tuneable emission. Small AIS QDs with long-term stability and high quantum yields (19-23%) were achieved at a molar ratio of Ag/In/S 1/10/10 in water without any dopant or a semiconductor shell. The theranostic potential of these cationic and anionic AIS QDs was also evaluated in vitro. Non-toxic doses were determined, and fluorescence imaging potential was demonstrated. More importantly, these QDs were electrostatically loaded with zwitterionic 5-aminolevulinic acid (ALA) as a prodrug to enhance the tumor availability of ALA and to improve ALA-induced porphyrin photodynamic therapy (PDT). This is the first study investigating the influence of nanoparticle charge on ALA binding, release, and therapeutic efficacy. Surface charge was found to be more critical in cellular internalization and dark toxicity rather than drug loading and release. Both QDs provided enhanced ALA release at acidic pH but protected the prodrug at physiological pH, which is critical for tumor delivery of ALA, which suffers from low bioavailability. The PDT efficacy of the ALA-loaded AIS QDs was tested in 2D monolayers and 3D constructs of HT29 and SW480 human colon adenocarcinoma cancer cell lines. The incorporation of ALA delivery by the AIS QDs, which on their own do not cause phototoxicity, elicited significant cell death due to enhanced light-induced ROS generation and apoptotic/necrotic cell death, reducing the IC50 for ALA dramatically to about 0.1 and 0.01 mM in anionic and cationic AIS QDs, respectively. Combined with simple synthetic methods, the strong intracellular photoluminescence of AIS QDs, good biocompatibility of especially the anionic AIS QDs, and the ability to act as drug carriers for effective PDT signify that the AIS QDs, in particular AIS-2MPA, are highly promising theranostic QDs.

Tunable structural and optical properties of AgxCuyInS2 colloidal quantum dots

Herein is discussed tunable absorption and emission properties of AgxCuyInS2 quantum dots involving wurtzite to chalcopyrite phase transformation dependent on Ag+ dopant content.

Probing How Various Metal Ions Interact with the Surface of QDs: Implication of the Interaction Event on the Photophysics of QDs

With an aim to understand the mechanism of interaction between quantum dots (QDs) and various metal ions, fluorescence response of less-toxic and water-soluble glutathione-capped Zn-Ag-In-S (GSH@ZAIS) QDs in the presence of different metal ions has been investigated at both ensemble and single-molecule level. Fourier transform infrared (FT-IR) spectroscopy has also been performed to obtain a molecular level understanding of the interaction event. The steady-state data reveal no significant change in QD emission for alkali and alkaline earth metal ions, while there is a decrease in fluorescence intensity for transition metal (TM) and some heavy transition metal (HTM) ions. Interestingly, a significant fluorescent enhancement (FE) (19-96%) of QDs is found for Cd²⁺ ions. Time-resolved fluorescence studies reveal that all the three decay components of QDs decrease in the presence of first-row TM ions. However, in the case of Cd²⁺, the shorter component is found to increase while the longer one decreases. The analysis of data reveals that photoinduced electron transfer is responsible for fluorescence quenching of QDs in the presence of first-row TM ions and destruction/removal of trap/defect states in the case of Cd²⁺ causes the FE. In FT-IR experiments, a prominent peak at 670 cm^-1, corresponding to Cd-S stretching vibrations, indicates strong ground-state interactions between the -SH of GSH and Cd²⁺ ions. Moreover, a decrease in the diffusion coefficient of QDs in the presence of Cd²⁺ ions during fluorescence correlation spectroscopy (FCS) studies further substantiates the removal of GSH by Cd²⁺ from the surface of QDs. The optical output of this study demonstrates that ZAIS can be used for fluorescence signaling of various metal ions and in particular selective detection of Cd²⁺. More importantly, these results also suggest that Cd²⁺ can effectively be used for enhancing the fluorescence quantum yield of thiol-capped QDs such as GSH@ZAIS.

FRET-Based Analysis of AgInS2/ZnAgInS/ZnS Quantum Dot Recombination Dynamics

Ternary quantum dots (QDs) are very promising nanomaterials with a range of potential applications in photovoltaics, light-emitting devices, and biomedicine. Despite quite intensive studies of ternary QDs over the last years, the specific relaxation channels involved in their emission mechanisms are still poorly understood, particularly in the corresponding core-shell nanostructures. In the present work, we have studied the recombination pathways of AgInS₂ QDs stabilized with the ZnAgInS alloy layer and the ZnS shell (AIS/ZAIS/ZnS QDs) using time-resolved fluorescence spectroscopy. We have also investigated FRET in complexes of AIS/ZAIS/ZnS QDs and cyanine dyes with the absorption bands overlapping in the different regions of the QD emission spectrum, which allowed us to selectively quench the radiative transitions of the QDs. Our studies have demonstrated that FRET from QDs to dyes results in decreasing of all QD PL decay components with the shortest lifetime decreasing the most and the longest one decreasing the least. This research presents important approaches for the investigation of ternary QD luminescence mechanisms by the selective quenching of recombination pathways. These studies are also essential for potential applications of ternary QDs in photodynamic therapy, multiplex analysis, and time-resolved FRET sensing.

Flexible translucent chitosan-glycerin/QD nanocomposite glue for anti-counterfeiting films with strong adhesion and stability

With the rapid development of commodity circulation, more attention has been paid to the anticounterfeiting technology of commodities, including stability, universality and ease of distinguishing. The authors report the use of gelatin-chitosan-glycerin/QD nanocomposite-functionalized glue for luminescent anti-counterfeiting labels. As the blend and plasticizer, the addition of chitosan and glycerin effectively improved the flexibility and formability of the gelatin-chitosan-glycerin/QD composite films, which show excellent mechanical properties, including high transparency, luminescence and flexibility, and they are easy to prepare on a large scale, providing certain reference values for new anticounterfeiting technology applying a variety of morphologies.

New Unsymmetrical Bisacridine Derivatives Noncovalently Attached to Quaternary Quantum Dots Improve Cancer Therapy by Enhancing Cytotoxicity toward Cancer Cells and Protecting Normal Cells

The use of nanoparticles for the controlled drug delivery to cells has emerged as a good alternative to traditional systemic delivery. Quantum dots (QDs) offer potentially invaluable societal benefits such as drug targeting and in vivo biomedical imaging. In contrast, QDs may also pose risks to human health and the environment under certain conditions. Here, we demonstrated that a unique combination of nanocrystals core components (Ag-In-Zn-S) would eliminate the toxicity problem and increase their biomedical applications. The alloyed quaternary nanocrystals Ag-In-Zn-S (QD_green, Ag_1.0In_1.2Zn_5.6S_9.4; QD_red, Ag_1.0In_1.0Zn_1.0S_3.5) were used to transport new unsymmetrical bisacridine derivatives (UAs, C-2028 and C-2045) into lung H460 and colon HCT116 cancer cells for improving the cytotoxic and antitumor action of these compounds. UAs were coupled with QD through physical adsorption. The obtained results clearly indicate that the synthesized nanoconjugates exhibited higher cytotoxic activity than unbound compounds, especially toward lung H460 cancer cells. Importantly, unsymmetrical bisacridines noncovalently attached to QD strongly protect normal cells from the drug action. It is worth pointing out that QD_green or QD_red without UAs did not influence the growth of cancer and normal cells, which is consistent with in vivo results. In noncellular systems, at pH 5.5 and 4.0, which relates to the conditions of endosomes and lysosomes, the UAs were released from QD-UAs nanoconjugates. An increase of total lysosomes content was observed in H460 cells treated with QDs-UAs which can affect the release of the UAs from the conjugates. Moreover, confocal laser scanning microscopy analyses revealed that QD-UAs nanoconjugates enter H460 cells more efficiently than to HCT116 and normal cells, which may be the reason for their higher cytotoxicity against lung cancer. Summarizing, the noncovalent attachment of UAs to QDs increases the therapeutic efficiency of UAs by improving cytotoxicity toward lung H460 cancer cells and having protecting effects on normal cells.

Highly efficient energy transfer from a water soluble zinc silver indium sulphide quantum dot to organic J-aggregates

Highly efficient energy transfer from a water soluble quantum dot to organic J-aggregates in an inorganic–organic nanohybrid associate.

Semiconductor nanocrystal-polymer hybrid nanomaterials and their application in molecular imprinting

Quantum dots (QDs) are attractive semiconductor fluorescent nanomaterials with remarkable optical and electrical properties. The broad absorption spectra and high stability of QD transducers are advantageous for sensing and bioimaging. Molecular imprinting is a technique for manufacturing synthetic polymeric materials with a high recognition ability towards a target analyte. The high selectivity of the molecularly imprinted polymers (MIPs) is a result of the fabrication process based on the template-tailored polymerization of functional monomers. The three-dimensional cavities formed in the polymer network can serve as the recognition elements of sensors because of their specificity and stability. Appending specific molecularly imprinted layers to QDs is a promising strategy to enhance the stability, sensitivity, and selective fluorescence response of the resulting sensors. By merging the benefits of MIPs and QDs, inventive optical sensors are constructed. In this review, the recent synthetic strategies used for the fabrication of QD nanocrystals emphasizing various approaches to effective functionalization in aqueous environments are discussed followed by a detailed presentation of current advances in QD conjugated MIPs (MIP-QDs). Frontiers in manufacturing of specific imprinted layers of these nanomaterials are presented and factors affecting the specific behaviour of an MIP shell are identified. Finally, current limitations of MIP-QDs are defined and prospects are outlined to amplify the capability of MIP-QDs in future sensing.

The Composition-Dependent Photoluminescence Properties of Non-Stoichiometric ZnxAgyInS1.5+x+0.5y Nanocrystals

A facile hot injection approach to synthesize high-quality non-stoichiometric Zn_xAg_yInS_1.5+x+0.5y nanocrystals (NCs) in the size range of 2.8–3.1 nm was presented. The fluorescence spectra had single band gap features, and indicated the formation of alloy states rather than simple composite structures. The chemical compositions, photoluminescence (PL) emission wavelengths, and quantum yields of Zn_xAg_yInS_1.5+x+0.5y nanocrystals were significantly influenced by the concentration of an organic capping agent. The appropriate proportion of 1-dodecanthiol in the precursor prevented the precipitation, increased the fluorescence quantum yield, and improved their optical properties. The proper ratio of capping agent allowed Zn, Ag, and In to form a better crystallinity and compositional homogeneity of Zn_xAg_yInS_1.5+x+0.5y nanocrystals. The photoluminescence was tunable from blue to red in the range of 450–700 nm as the Ag content changed independently. The PL and absorption spectra of Zn_xAg_yInS_1.5+x+0.5y nanocrystals showed a significant blue shift with the decrease of Ag content in the precursor. As there were no obvious differences on the average particle sizes of Zn_xAg_yInS_1.5+x+0.5y samples, these results fully revealed the composition-dependent photoluminescence properties of Zn_xAg_yInS_1.5+x+0.5y nanocrystals. The relative quantum yield reached 35%. The fluorescence lifetimes (τ₁=115–148 ns and τ₂=455–483 ns) were analogous to those of AgInS₂ and (AgIn)_xZn_2(1−x)S₂.

A facile approach to fabricate self-assembled magnetic nanotheranostics for drug delivery and imaging

Superparamagnetic iron oxide (SPIO) nanoparticles have been extensively employed for theranostic applications due to their good biocompatibility and excellent magnetic resonance imaging (MRI) properties. However, these particles typically require surface modification due to their hydrophobic surfaces caused by the oil-phase surfactants used in the fabrication and thus, the drug loading on their surface is usually limited. Here, we provided a novel and facile approach to conveniently perform surface modification of SPIO while simultaneously loading a large amount of drug. By synthesizing an amphiphilic irinotecan-based compound with a hydrophobic tail enabling insertion into the SPIO assembly, an excellent SPIO-based theranostic nanomedicine (SPIO@IR) was produced. SPIO@IR not only extensively improved the drug efficacy, but also allowed visualization by MRI in biological systems.

Encapsulation and solubilization of ultrastable quantum dots with multidentate bilayer ligands and rheological behaviour

Quantum dots with unique optical and chemical properties show great potential applications in biology and chemical and medical science. Nevertheless, their practical applications in various fields are greatly limited due to the presence of hydrophobic organic surfaces. In this paper, we report a simple and effective method based on ligand exchange and proton donor-receptor reaction to prepare ultrastable and amphiphilic quantum dots having bilayer ligands with ultidentate structure, which provide active sites for subsequent functional conjugation. Our results show that these quantum dots exhibit monodispersity, excellent stability and solvent-free fluidity. In addition, they maintain their optical properties in a chemical environment due to the large amount of amphiphilic amine salts as ligands, which also endow quantum dots with lower cytotoxicity and higher antibacterial activity. The synthesis strategy in this study provides a new insight into the design and fabrication of promising multifunctional materials for biology, medicine, and energy and display technologies.

Mn Doped AZIS/ZnS Nanocrystals (NCs): Effects of Ag and Mn Levels on NC Optical Properties

In this work, Mn-doped AZIS/ZnS NCs were prepared using a nucleation doping approach with the tuning of Mn and Ag levels in their synthesis. The optical properties of Mn:AZIS/ZnS NCs are found to be significantly affected by Ag and Mn levels. Specifically, more Ag and Mn atoms in Mn:AZIS/ZnS NCs cause their fluorescence red-shift, and as the Ag or Mn level reaches a high threshold, the fluorescence lifetime of Mn:AZIS/ZnS NC has a significant drop. The reasons for the effects of Mn and Ag levels on NC optical properties were explored and discussed. Through this study, it is also found that with certain Ag and Mn levels in synthesis, some Mn:AZIS/ZnS NCs present optimal optical properties including high brightness (QY > 40%), long fluorescence lifetime (> 1.2 ms), low energy for excitation (excitable at 405 nm), and no reabsorption. The feasibility of the optimized NCs for time-gated fluorescence measurement using a portable/compact instrument was further demonstrated, which indicates the application potential of the NCs in time-gated biosensing including point-of-care testing. Notably, this study also discloses that Mn:AZIS/ZnS NCs with different lifetimes can be achieved by tuning Mn and Ag levels in synthesis, which may further broaden the applications of Mn:AZIS/ZnS NCs in multiplexing detection/measurement.

Biocompatible Semiconductor Quantum Dots as Cancer Imaging Agents

Approximately 1.7 million new cases of cancer will be diagnosed this year in the United States leading to 600 000 deaths. Patient survival rates are highly correlated with the stage of cancer diagnosis, with localized and regional remission rates that are much higher than for metastatic cancer. The current standard of care for many solid tumors includes imaging and biopsy with histological assessment. In many cases, after tomographical imaging modalities have identified abnormal morphology consistent with cancer, surgery is performed to remove the primary tumor and evaluate the surrounding lymph nodes. Accurate identification of tumor margins and staging are critical for selecting optimal treatments to minimize recurrence. Visible, fluorescent, and radiolabeled small molecules have been used as contrast agents to improve detection during real-time intraoperative imaging. Unfortunately, current dyes lack the tissue specificity, stability, and signal penetration needed for optimal performance. Quantum dots (QDs) represent an exciting class of fluorescent probes for optical imaging with tunable optical properties, high stability, and the ability to target tumors or lymph nodes based on surface functionalization. Here, state-of-the-art biocompatible QDs are compared with current Food and Drug Administration approved fluorophores used in cancer imaging and a perspective on the pathway to clinical translation is provided.

Luminescence and photoelectrochemical properties of size-selected aqueous copper-doped Ag-In-S quantum dots

Ternary luminescent copper and silver indium sulfide quantum dots (QDs) can be an attractive alternative to cadmium and lead chalcogenide QDs. The optical properties of Cu-In-S and Ag-In-S (AIS) QDs vary over a broad range depending on the QD composition and size. The implementation of ternary QDs as emitters in bio-sensing applications can be boosted by the development of mild and reproducible syntheses directly in aqueous solutions as well as the methods of shifting the photoluminescence (PL) bands of such QDs as far as possible into the near IR spectral range. In the present work, the copper-doping of aqueous non-stoichiometric AIS QDs was found to result in a red shift of the PL band maximum from around 630 nm to ∼780 nm and PL quenching. The deposition of a ZnS shell results in PL intensity recovery with the highest quantum yield of 15%, with almost not change in the PL band position, opposite to the undoped AIS QDs. Size-selective precipitation using 2-propanol as a non-solvent allows discrimination of up to 9 fractions of Cu-doped AIS/ZnS QDs with the average sizes in the fractions varying from around 3 to 2 nm and smaller and with reasonably the same composition irrespective of the QD size. The decrease of the average QD size results in a blue PL shift yielding a series of bright luminophors with the emission color varies from deep-red to bluish-green and the PL efficiency increases from 11% for the first fraction to up to 58% for the smallest Cu-doped AIS/ZnS QDs. The rate constant of the radiative recombination of the size-selected Cu-doped AIS/ZnS QDs revealed a steady growth with the QD size decrease as a result of the size-dependent enhancement of the spatial exciton confinement. The copper doping was found to result in an enhancement of the photoelectrochemical activity of CAIS/ZnS QDs introduced as spectral sensitizers of mesoporous titania photoanodes of liquid-junction solar cells.

Stable nanoconjugates of transferrin with alloyed quaternary nanocrystals Ag-In-Zn-S as a biological entity for tumor recognition

One way to limit the negative effects of anti-tumor drugs on healthy cells is targeted therapy employing functionalized drug carriers. Here we present a biocompatible and stable nanoconjugate of transferrin anchored to Ag-In-Zn-S quantum dots modified with 11-mercaptoundecanoic acid (Tf-QD) as a drug carrier versus typical anticancer drug, doxorubicin. Detailed investigations of Tf-QD nanoconjugates without and with doxorubicin by fluorescence studies and cytotoxic measurements showed that the biological activity of both the transferrin and doxorubicin was fully retained in the nanoconjugate. In particular, the intercalation capabilities of free doxorubicin versus ctDNA remained essentially intact upon its binding to the nanoconjugate. In order to evaluate these capabilities, we studied the binding constant of doxorubicin attached to Tf-QDs with ctDNA as well as the binding site size on the ctDNA molecule. The binding constant slightly decreased compared to that of free doxorubicin while the binding site size, describing the number of consecutive DNA lattice residues involved in the binding, increased. It was also demonstrated that the QDs alone and in the form of a nanoconjugate with Tf were not cytotoxic towards human non-small cell lung carcinoma (H460 cell line) and the tumor cell sensitivity of the DOX-Tf-QD nanoconjugate was comparable to that of doxorubicin alone.

Preparation and characterization of universal Fe3O4@SiO2/CdTe nanocomposites for rapid and facile detection and separation of membrane proteins

The separation and enrichment of cell membrane proteins was achieved by the construction of bi-functional magnetic fluorescent nanoprobes.

Mn Doped AIZS/ZnS Nanocrystals: Synthesis and Optical Properties

In this work, Mn doped AIZS/ZnS (Mn:AIZS/ZnS) nanocrystals (NCs) have been synthesized in an approach using heat-up and drop-wise addition of precursors. On the basis of the characterization of these doped NCs on their optical properties and materials, it is found that: (1) as more Mn atoms are doped into NCs, the doped NCs present photoluminescence (PL) red-shift and quantum yield quenching; (2) the doped NCs possess a short PL lifetime in tens of microseconds and a long PL lifetime in hundreds of microseconds, and the short lived PL is more dominant than the long lived one; and (3) the doped NCs present a reversible PL thermal quenching in a range from room temperature to 170°C. Possible PL mechanisms of these NCs were discussed by analyzing their time-resolved PL spectra and thermal stability.

One-Pot Aqueous Synthesis of Fluorescent Ag-In-Zn-S Quantum Dot/Polymer Bioconjugates for Multiplex Optical Bioimaging of Glioblastoma Cells

Cancer research has experienced astonishing advances recently, but cancer remains a major threat because it is one of the leading causes of death worldwide. Glioblastoma (GBM) is the most malignant brain tumor, where the early diagnosis is vital for longer survival. Thus, this study reports the synthesis of novel water-dispersible ternary AgInS2 (AIS) and quaternary AgInS2-ZnS (ZAIS) fluorescent quantum dots using carboxymethylcellulose (CMC) as ligand for multiplexed bioimaging of malignant glioma cells (U-87 MG). Firstly, AgInS2 core was prepared using a one-pot aqueous synthesis stabilized by CMC at room temperature and physiological pH. Then, an outer layer of ZnS was grown and thermally annealed to improve their optical properties and split the emission range, leading to core-shell alloyed nanostructures. Their physicochemical and optical properties were characterized, demonstrating that luminescent monodispersed AIS and ZAIS QDs were produced with average sizes of 2.2 nm and 4.3 nm, respectively. Moreover, the results evidenced that they were cytocompatible using in vitro cell viability assays towards human embryonic kidney cell line (HEK 293T) and U-87 MG cells. These AIS and ZAIS successfully behaved as fluorescent nanoprobes (red and green, resp.) allowing multiplexed bioimaging and biolabeling of costained glioma cells using confocal microscopy.

AgInS2-ZnS Quantum Dots: Excited State Interactions with TiO2 and Photovoltaic Performance

Multinary quantum dots such as AgInS₂ and alloyed AgInS₂-ZnS are an emerging class of semiconductor materials for applications in photovoltaic and display devices. The nanocrystals of (AgInS₂)_x-(ZnS)_1-x (for x = 0.67) exhibit a broad emission with a maximum at 623 nm and interact strongly with TiO₂ nanostructures by injecting electrons from the excited state. The electron transfer rate constant as determined from transient absorption spectroscopy was 1.8 × 10¹⁰ s^-1. The photovoltaic performance was evaluated over a period of a few weeks to demonstrate the stability of AgInS₂-ZnS when utilized as sensitizers in solar cells. We report a power conversion efficiency of 2.25% of our champion cell 1 month after its fabrication. The limitations of AgInS₂-ZnS nanocrystals in achieving greater solar cell efficiency are discussed.

0D-2D Quantum Dot: Metal Dichalcogenide Nanocomposite Photocatalyst Achieves Efficient Hydrogen Generation

Hydrogen generation via photocatalysis-driven water splitting provides a convenient approach to turn solar energy into chemical fuel. The development of photocatalysis system that can effectively harvest visible light for hydrogen generation is an essential task in order to utilize this technology. Herein, a kind of cadmium free Zn-Ag-In-S (ZAIS) colloidal quantum dots (CQDs) that shows remarkably photocatalytic efficiency in the visible region is developed. More importantly, a nanocomposite based on the combination of 0D ZAIS CQDs and 2D MoS₂ nanosheet is developed. This can leverage the strong light harvesting capability of CQDs and catalytic performance of MoS₂ simultaneously. As a result, an excellent external quantum efficiency of 40.8% at 400 nm is achieved for CQD-based hydrogen generation catalyst. This work presents a new platform for the development of high-efficiency photocatalyst based on 0D-2D nanocomposite.

Labeling and in vivo visualization of transplanted adipose tissue-derived stem cells with safe cadmium-free aqueous ZnS coating of ZnS-AgInS2 nanoparticles

The facile synthesis of ZnS-AgInS₂ (ZAIS) as cadmium-free QDs and their application, mainly in solar cells, has been reported by our groups. In the present study, we investigated the safety and the usefulness for labeling and in vivo imaging of a newly synthesized aqueous ZnS-coated ZAIS (ZnS-ZAIS) carboxylated nanoparticles (ZZC) to stem cells. ZZC shows the strong fluorescence in aqueous solutions such as PBS and cell culture medium, and a complex of ZZC and octa-arginine (R8) peptides (R8-ZZC) can achieve the highly efficient labeling of adipose tissue-derived stem cells (ASCs). The cytotoxicity of R8-ZZC to ASCs was found to be extremely low in comparison to that of CdSe-based QDs, and R8-ZZC was confirmed to have no influence on the proliferation rate or the differentiation ability of ASCs. Moreover, R8-ZZC was not found to induce the production of major inflammatory cytokines (TNF-α, IFN-γ, IL-12p70, IL-6 and MCP-1) in ASCs. Transplanted R8-ZZC-labeled ASCs could be quantitatively detected in the lungs and liver mainly using an in vivo imaging system. In addition, high-speed multiphoton confocal laser microscopy revealed the presence of aggregates of transplanted ASCs at many sites in the lungs, whereas individual ASCs were found to have accumulated in the liver.

Synthetic strategies and biomedical applications of I–III–VI ternary quantum dots

In this review, we discuss recent advances of I–III–VI QDs with a major focus on synthesis and biomedical applications; advantages include low toxicity and fluorescent tuning in the biological window.

Controlling Shape Anisotropy of ZnS-AgInS2 Solid Solution Nanoparticles for Improving Photocatalytic Activity

Independently controlling the shape anisotropy and chemical composition of multinary semiconductor particles is important for preparing highly efficient photocatalysts. In this study, we prepared ZnS-AgInS₂ solid solution ((AgIn)_xZn_2(1-x)S₂, ZAIS) nanoparticles with well-controlled anisotropic shapes, rod and rice shapes, by reacting corresponding metal acetates with a mixture of sulfur compounds with different reactivities, elemental sulfur, and 1,3-dibutylthiourea, via a two-step heating-up process. The chemical composition predominantly determined the energy gap of ZAIS particles: the fraction of Zn²⁺ in rod-shaped particles was tuned by the ratio of metal precursors used in the nanocrystal formation, while postpreparative Zn²⁺ doping was necessary to increase the Zn²⁺ fraction in the rice-shaped particles. The photocatalytic H₂ evolution rate with irradiation to ZAIS particles dispersed in an aqueous solution was significantly dependent on the chemical composition in the case of using photocatalyst particles with a constant morphology. In contrast, photocatalytic activity at the optimum ZAIS composition, x of 0.35-0.45, increased with particle morphology in the order of rice (size: ca. 9 × ca. 16 nm) < sphere (diameter: ca. 5.5 nm) < rod (size: 4.6 × 27 nm). The highest apparent quantum yield for photocatalytic H₂ evolution was 5.9% for rod-shaped ZAIS particles, being about two times larger than that obtained with spherical particles.

Bandgap and Structure Engineering via Cation Exchange: From Binary Ag2S to Ternary AgInS2, Quaternary AgZnInS alloy and AgZnInS/ZnS Core/Shell Fluorescent Nanocrystals for Bioimaging

Attention on semiconductor nanocrystals have been largely focused because of their unique optical and electrical properties, which can be applied as light absorber and luminophore. However, the band gap and structure engineering of nanomaterials is not so easy because of their finite size. Here we demonstrate an approach for preparing ternary AgInS2 (AIS), quaternary AgZnInS (AZIS), AgInS2/ZnS and AgZnInS/ZnS nanocompounds based on cation exchange. First, pristine Ag2S quantum dots (QDs) with different sizes were synthesized in one-pot, followed by the partial cation exchange between In(3+) and Ag(+). Changing the initial ratio of In(3+) to Ag(+), reaction time and temperature can control the components of the obtained AIS QDs. Under the optimized conditions, AIS QDs were obtained for the first time with a cation disordered cubic phase and high photoluminescence (PL) quantum yield (QY) up to 32% in aqueous solution, demonstrating the great potential of cation exchange in the synthesis for nanocrystals with excellent optical properties. Sequentially, Zn(2+) ions were incorporated in situ through a second exchange of Zn(2+) to Ag(+)/In(3+), leading to distinct results under different reaction temperature. Addition of Zn(2+) precursor at room temperature produced AIS/ZnS core/shell NCs with successively enhancement of QY, while subsequent heating could obtain AZIS homogeneous alloy QDs with a successively blue-shift of PL emission. This allow us to tune the PL emission of the products from 483 to 675 nm and fabricate the chemically stable QDs core/ZnS shell structure. Based on the above results, a mechanism about the cation exchange for the ternary nanocrystals of different structures was proposed that the balance between cation exchange and diffusion is the key factor of controlling the band gap and structure of the final products. Furthermore, photostability and in vitro experiment demonstrated quite low cytotoxicity and remarkably promising applications in the field of clinical diagnosis.

Heat-up Synthesis of Ag-In-S and Ag-In-S/ZnS Nanocrystals: Effect of Indium Precursors on Their Optical Properties

Cadmium-free I-III-VI nanocrystals (NCs) have recently attracted much research interests due to their excellent optical properties and low toxicity. In this work, with a simple heat-up synthetic system to prepare high quality Ag-In-S (AIS) NCs and their core/shell structures (AIS/ZnS NCs), we investigated the effect of different indium precursors (indium acetate and indium chloride) on NC optical properties. The measurements on photoluminescence spectra of AIS NCs show that the photoluminescence peak-wavelength of AIS NCs using indium acetate is in the range from 596 to 604 nm, and that of AIS NCs using indium chloride is from 641 to 660 nm. AIS and AIS/ZnS NCs using indium acetate present around 15% and 40% QYs, and both AIS and AIS/ZnS NCs using indium chloride present around 31% QYs. The photoluminescence decay study indicates that the lifetime parameters of AIS and AIS/ZnS using indium chloride are 2 ~ 4 times larger than those of AIS and AIS/ZnS NCs using indium acetate. Moreover, AIS NCs using indium chloride have a slower photobleaching dynamics than AIS NCs using indium acetate, and ZnS shell coating on both types of AIS NCs significantly enhances their photostability against UV exposure. We believe that the unique optical properties of AIS and AIS/ZnS NCs will open an avenue for these materials to be employed in broad electronic or biomedical applications.

Photoluminescence properties of AgInS2-ZnS nanocrystals: the critical role of the surface

AgInS2-ZnS (ZAIS) nanocrystals are very good candidates for easily synthesized, highly efficient cadmium-free nano-phosphors. They can be employed for the development of next generation white-LED technologies, taking advantage of their nanometric size. This paper describes the combined use of time-resolved emission spectroscopy and photoluminescence quantum yield measurements to quantitatively compare the efficiency of each recombination pathway involved in the photoluminescence of ZAIS nanocrystals. This approach, applied to nanocrystals of different sizes, compositions and surface chemistry revealed the critical role of surface effects. Moreover, we developed a new type of surface passivation that increases the photoluminescence quantum yield of all nanocrystal compositions by 15 to 20%. This molecular surface passivation can be applied as a replacement or in addition to the already established ZnS shell passivation method.

Facile Synthesis of Cadmium-Free Zn-In-S:Ag/ZnS Nanocrystals for Bio-Imaging

High quality cadmium-free Zn-In-S:Ag doped-nanocrystals (d-NCs) were synthesized via a simple one-step noninjection route using silver nitrate, indium acetate, zinc acetate, oleylamine, S powder and 1-dodecanethiol as starting materials in an organic phase. The size and optical properties can be effectively tailored by controlling the reaction time, reaction temperature, Ag(+) dopant concentration, and the molar ratio of In to Zn. The photoluminescence wavelength of as-prepared Zn-In-S:Ag NCs covered a broad visible range from 458 nm to 603 nm. After being passivated by protective ZnS shell, the photoluminescence quantum yield (PLQY) of Zn-In-S:Ag(+) /ZnS was greatly improved to 43.5%. More importantly, the initial high PLQY of the obtained core/shell d-NCs in organic media can be preserved when being transferred into the aqueous media via ligand exchange. Finally, high quality Zn-In-S:Ag(+) /ZnS d-NCs in aqueous phase were applied as bio-imaging agents for identifying living KB cells.

Tumor cell-targeted Zn3In2S6 and Ag–Zn–In–S quantum dots for color adjustable luminophores

We report on the synthesis of water dispersible Zn₃In₂S₆ and Ag–Zn–In–S QDs and their relaxation dynamics.

Quaternary alloy quantum dots with widely tunable emission – a versatile system to fabricate dual-emission nanocomposites for bio-imaging

Highly luminescent Zn-I-III-VI-based QDs with widely composition-tuned PL emissions have been synthesized for multiscale biomedical optical imaging.

High color rendering index warm white light emitting diodes fabricated from AgInS2/ZnS quantum dot/PVA flexible hybrid films

A high color rendering warm-white LED is fabricated by fixing suitable thicknesses of the green and red AIS/ZnS QD/PVA luminescent films on top of a conventional blue InGaN chip.

Room temperature synthesis of manganese oxide quantum dots and their application as a fluorescent probe for the detection of metal ions in aqueous media

A rapid and facile route to access fluorescent manganese oxide quantum dots (MOQDs) has been developed at room temperature; the as-prepared MOQDs can serve as a fluorescent probe for the detection of metal ions in aqueous media.

Temperature-dependent photoluminescence of cadmium-free Cu-Zn-In-S quantum dot thin films as temperature probes

We reported temperature-dependent photoluminescence (PL) studies on Cu-Zn-In-S quantum dot (QD) thin films. In this paper, cadmium-free and luminescent Cu-Zn-In-S quantum dot thin films were in situ formed by thermal decomposition of molecular-based precursors in the open air, without need of the complicated quantum dot synthesis. Molecular-based precursor solutions were prepared by dissolving Cu2O, ZnO, and In(OH)3 in the ethanol solution of butylamine and carbon disulfide. The effects of sintering temperature, sintering time, and the concentration of capping agents on the photoluminescence properties of Cu-Zn-In-S QD thin films have been systematically investigated. It was found that alkali metal ions play an important role in enhancing the PL quantum yield of quantum dot thin films. The as-prepared QD thin films show composition-tunable emission in the range of 535 nm to 677 nm, and the absolute PL quantum yields can reach as high as 22.1%. All of the as-deposited QD thin films show a single-exponential decay to temperature, indicating that these cadmium-free QD thin films have high potential as temperature probes.

Synthetic Developments of Nontoxic Quantum Dots

Semiconductor nanocrystals, or quantum dots (QDs), are candidates for biological sensing, photovoltaics, and catalysis due to their unique photophysical properties. The most studied QDs are composed of heavy metals like cadmium and lead. However, this engenders concerns over heavy metal toxicity. To address this issue, numerous studies have explored the development of nontoxic (or more accurately less toxic) quantum dots. In this Review, we select three major classes of nontoxic quantum dots composed of carbon, silicon and Group I-III-VI elements and discuss the myriad of synthetic strategies and surface modification methods to synthesize quantum dots composed of these material systems.

Polymeric complex micelles with double drug-loading strategies for folate-mediated paclitaxel delivery

Drug loading is a key procedure in the preparation of drug-loaded nano-carriers. In this study, the paclitaxel (PTX)-loaded polymeric complex micelles (FA-P123-PTX/PTX micelles) with double drug-loading strategies were designed and prepared to improve the drug loading percentage of carriers and its anti-tumor efficiency. PTX was simultaneously conjugated to pluronic P123 (P123) polymer and encapsulated inside the P123 complex micelle. Folate (FA) was linked to the surface of micelles for the active target delivery of micelles to tumor cells. The FA-P123-PTX/PTX micelles showed spherical shaped with high drug loading of 18.08±0.64%. The results of cellular uptake studies suggested that FA could promote the internalization of micelles into the FR positive cells. FA-P123-PTX/PTX micelles showed significant higher anti-tumor activity against FR positive tumor cells compared to Taxol(®) (p<0.05). Moreover, the FA-P123-PTX/PTX micelles exhibited higher anti-tumor efficacy in B16 bearing mice with better safety property compared with Taxol(®). These results suggested that FA-P123-PTX/PTX micelles with double drug-loading strategies showed great potential for targeted delivery of anti-cancer drugs.

Water-soluble Zn–Ag–In–Se quantum dots with bright and widely tunable emission for biomedical optical imaging

In this work, we synthesized water-soluble quaternary cadmium-free Zn–Ag–In–Se quantum dots with bright and widely tunable emission, and explored their potential in tumor-specific imaging in vitro and in vivo.

Effective cellular internalization of silica-coated CdSe quantum dots for high contrast cancer imaging and labelling applications

The possibility of developing novel contrast imaging agents for cancer cellular labelling and fluorescence imaging applications were explored using silica-coated cadmium selenide (CdSe) quantum dots (QDs). The time dependent cellular internalization efficiency study was carried out using Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) and Confocal Laser Scanning Microscopy (cLSM) after exposing QDs to stem cells and cancer cells. The strong fluorescence from the cytoplasm confirmed that the QDs were efficiently internalized by the cells. The internalization maxima were observed at the fourth hour of incubation in both stem and cancer cells. Further, the in vitro fluorescence imaging as well as localization study of QDs were performed in various cells. Moreover, high contrast in vivo tumor imaging efficiency of silica-coated CdSe QDs was performed in ultrathin sections of tumor mice, and the results confirmed its effective role in cellular imaging and labelling in cancer and other diseases.