Self-templating synthesis of hollow mesoporous silica and their applications in catalysis and drug delivery

Preparation of Monodisperse Silica Mesoporous Microspheres with Narrow Pore Size Distribution

The purpose of this study is to prepare monodisperse silica mesoporous microspheres with narrow pore size distribution to promote their application in the field of liquid chromatography. An improved emulsion method was used to prepare silica mesoporous microspheres, and the rotary evaporation temperature, emulsification speed, dosage of porogen DMF, and dosage of the catalyst NH3·H2O were optimized. Subsequently, these microspheres were respectively treated by alkali-heating, calcination, and sieving. The D50 (particle size at the cumulative particle size distribution percentage of 50%) of as-prepared silica mesoporous microspheres is 26.3 μm, and the D90/D10 (the ratio of particle size at a cumulative particle size distribution percentage of 90% to a cumulative particle size distribution percentage of 10%) is 1.94. The resultant silica mesoporous microspheres have distinctive pore structures, with a pore volume of more than 1.0 cm3/g, an average pore size of 11.35 nm, and a median pore size of 13.4 nm. The silica mesoporous microspheres with a large particle size, uniform particle size distribution, large average pore size and pore volume, and narrow mesopore size distribution can basically meet the requirements of preparative liquid chromatographic columns.

Determination of free fatty acids in edible oil based on hollow mesoporous silica nanoparticles

In our study, ammoniated hollow mesoporous silica nanoparticles (NH2-HMSN) with uniform diameter and stable structure were successively prepared via SiO2 core hard template method. Fourier transformed infrared spectroscopy revealed that amino group was effectively modified. Adsorption experiments showed that adsorption capacity of NH2-HMSN towards free fatty acids (FFAs) was superior to aminated mesopores or silica microspheres. Following through optimization of extraction conditions, FFAs from edible oil samples were successfully gathered by NH2-HMSN and showed favorable linearities (0.2-90 μg g-1), remarkably low limit of detections (0.03-0.15 nmol g-1), acceptable recoveries (85.08-96.82 %) and relatively accurate precisions (1.64-4.99 %). In comparison to existing adsorbent, NH2-HMSN could be successfully prepared via the chemical reaction of common raw materials under normal pressure and temperature. Furthermore, NH2-HMSN with hollow and mesoporous structure was more effective than the current adsorbents aimed at FFAs analysis in aspect of surface area and adsorption capacity.

Enhancing the inhibition of dental erosion and abrasion with quercetin-encapsulated hollow mesoporous silica nanocomposites

Introduction: Dental erosion and abrasion pose significant clinical challenges, often leading to exposed dentinal tubules and dentine demineralization. The aim of this study was to analyse the efficacy of quercetin-encapsulated hollow mesoporous silica nanocomposites (Q@HMSNs) on the prevention of dentine erosion and abrasion. Method: Q@HMSNs were synthesized, characterized, and evaluated for their biocompatibility. A total of 130 dentine specimens (2 mm × 2 mm × 2 mm) were prepared and randomly distributed into 5 treatment groups (n = 26): DW (deionized water, negative control), NaF (12.3 mg/mL sodium fluoride, positive control), Q (300 μg/mL quercetin), HMSN (5.0 mg/mL HMSNs), and Q@HMSN (5.0 mg/mL Q@HMSNs). All groups were submitted to in vitro erosive (4 cycles/d) and abrasive (2 cycles/d) challenges for 7 days. The specimens in the DW, NaF, and Q groups were immersed in the respective solutions for 2 min, while treatment was performed for 30 s in the HMSN and Q@HMSN groups. Subsequently, the specimens were subjected to additional daily erosion/abrasion cycles for another 7 days. The effects of the materials on dentinal tubule occlusion and demineralized organic matrix (DOM) preservation were examined by scanning electron microscopy (SEM). The penetration depth of rhodamine B fluorescein into the etched dentine was assessed using confocal laser scanning microscopy (CLSM). The erosive dentine loss (EDL) and release of type I collagen telopeptide (ICTP) were measured. The data were analysed by one-way analysis of variance (ANOVA) with post hoc Tukey's test (α = 0.05). Results: Q@HMSNs were successfully synthesized and showed minimal toxicity to human dental pulp stem cells (HDPSCs) and gingival fibroblasts (HGFs). Q@HMSNs effectively occluded the dentinal tubules, resulting in a thicker DOM in the Q@HMSN group. The CLSM images showed more superficial penetration in the HMSN and Q@HMSN groups than in the quercetin, NaF, and DW groups. The Q@HMSN group exhibited a significantly lower EDL and reduced ICTP levels compared to the other groups (p < 0.05). Conclusion: Q@HMSNs hold promise for inhibiting dentine erosion and abrasion by promoting tubule occlusion and DOM preservation.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

Integration of a Cu2O/ZnO heterojunction and Ag@SiO2 into a photoanode for enhanced solar water oxidation

Photoelectrochemical water splitting (PEC-WS) has attracted considerable attention owing to its low energy consumption and sustainable nature. Constructing semiconductor heterojunctions with controllable band structure can effectively facilitate photogenerated carrier separation. In this study, a FTO/ZnO/Cu2O/Ag@SiO2 photoanode with a Cu2O/ZnO p-n heterojunction and Ag@SiO2 nanoparticles is constructed to investigate its PEC-WS performance. Compared with a bare ZnO photoanode, the photocurrent density of the FTO/ZnO/Cu2O/Ag@SiO2 photoanode (0.77 mA cm-2) at 1.23 VRHE exhibits an increment of 88%, and a cathodic shift of 0.1 V for the on-set potential (0.4 VRHE). Detailed photoelectrochemical analyses reveal that the Cu2O/ZnO p-n heterojunction formed between Cu2O and ZnO can effectively promote photogenerated carrier separation. The surface plasmonic effect of the Ag@SiO2 nanoparticles can further promote the photogenerated carrier transfer efficiency, which synergistically improves the PEC-WS performance.

Galvanic Replacement Reaction: Enabling the Creation of Active Catalytic Structures

The galvanic replacement reaction (GRR) is recognized as a redox process where one metal undergoes oxidation by the ions of another metal possessing a higher reduction potential. This reaction takes place at the interface between a substrate and a solution containing metal ions. Utilizing metal or metal oxide as sacrificial templates enables the synthesis of metallic nanoparticles, oxide-metal composites, and mixed oxides through GRR. Growing evidence showed that GRR has a direct impact on surface structures and properties. This has generated significant interest in catalysis and opened up new horizons for the application of GRR in energy and chemical transformations. This review provides a comprehensive overview of the synthetic strategies utilizing GRR for the creation of catalytically active structures. It discusses the formation of alloys, intermetallic compounds, single atom alloys, metal-oxide composites, and mixed metal oxides with diverse nanostructures. Additionally, GRR serves as a postsynthesis method to modulate metal-oxide interfaces through the replacement of oxide domains. The review also outlines potential future directions in this field.

Nanoreactor Engineering Can Unlock New Possibilities for CO2 Tandem Catalytic Conversion to C-C Coupled Products

Climate change is becoming increasingly more pronounced every day while the amount of greenhouse gases in the atmosphere continues to rise. CO₂ reduction to valuable chemicals is an approach that has gathered substantial attention as a means to recycle these gases. Herein, some of the tandem catalysis approaches that can be used to achieve the transformation of CO₂ to C-C coupled products are explored, focusing especially on tandem catalytic schemes where there is a big opportunity to improve performance by designing effective catalytic nanoreactors. Recent reviews have highlighted the technical challenges and opportunities for advancing tandem catalysis, especially highlighting the need for elucidating structure-activity relationships and mechanisms of reaction through theoretical and in situ/operando characterization techniques. In this review, the focus is on nanoreactor synthesis strategies as a critical research direction, and discusses these in the context of two main tandem pathways (CO-mediated pathway and Methanol-mediated pathway) to C-C coupled products.

Recent advances in core-shell structured catalysts for low-temperature NH3-SCR of NOx

Ammonia selective catalytic reduction (NH₃-SCR) of nitrogen oxides is an effective and well-established technology for NO_x removal, but current commercial denitrification catalysts based on V₂O₅-WO₃/TiO₂ have some obvious disadvantages, including narrow operating temperature windows, toxicity, poor hydrothermal stability, and unsatisfied SO₂/H₂O tolerance. To overcome these drawbacks, it is imperative to investigate new types of highly efficient catalysts. In order to design catalysts with outstanding selectivity, activity, and anti-poisoning ability, core-shell structured materials have been widely applied in the NH₃-SCR reaction, which exhibits numerous advantages including the large surface area, the strong synergy interaction of core-shell materials, the confinement effect, and the shielding effect from the shell layer to protect the core. This review summarizes recent developments of core-shell structured catalysts for NH₃-SCR, including basic classification, synthesis methods, and a detailed description of the performance and mechanisms of each type of catalyst. It is hoped that the review will stimulate future developments in NH₃-SCR technology, leading to novel catalyst designs with improved denitrification performance.

Diatom Frustules Decorated with Co Nanoparticles for the Advanced Anode of Li-Ion Batteries

Silica is regarded as a promising anode material for lithium-ion batteries (LIBs) because of its high theoretical capacity. However, large volume variation and poor electrical conductivity are limiting factors for the development of SiO₂ anode materials. To solve this problem, combining SiO₂ with a conductive phase and designing hollow porous structures are effective ways. In this work, The Co(II)-EDTA chelate on the surface of diatom biosilica (DBS) frustules and obtained DBS@C-Co composites decorated with Co nanoparticles by calcination without a reducing atmosphere is first precipitated. The unique three-dimensional structure of diatom frustules provides enough space for the volume change of silica during lithiation/delithiation. Co nanoparticles effectively improve the electrical conductivity and electrochemical activity of silica. Through the synergistic effect of the hollow porous structure, carbon layer and Co nanoparticles, the DBS@C-Co-60 composite delivers a high reversible capacity of >620 mAh g^-1 at 100 mA g^-1 after 270 cycles. This study provides a new method for the synthesis of metal/silica composites and an opportunity for the development of natural resources as advanced active materials for LIBs.

Engineered silica nanomaterials in pesticide delivery: Challenges and perspectives

Over the past decade, nanopesticide has been developed rapidly for exploring effective and safe alternatives to conventional pesticides with significant drawbacks and risks. Many nanotechnologies, including pesticide nanoemulsions, polymer-based nanopesticides, and metal/metal oxide nanoparticle-based pesticides have emerged and are extensively reviewed. Engineered silica nanomaterials (ESNs) have also shown promising potential as carriers in nanopesticides for modern agriculture. However, there are limited reviews specifically on ESN-based nanopesticides. Herein, we provide a comprehensive review on the recent progress of ESN-based nanopesticide technologies. An introduction of synthetic technology, formation mechanism, and surface engineering technology is firstly presented. Then, the advantages of ESN-based pesticide formulation and their structure-function-relationship are illustrated in detail. Finally, our perspectives on challenges and future research in ESN-based nanopesticide development are discussed.

Synthesis of Hollow Mesoporous Silica Nanospheroids with O/W Emulsion and Al(III) Incorporation and Its Catalytic Activity for the Synthesis of 5-HMF from Carbohydrates

Controlling the particle size as well as porosity and shape of silica nanoparticles is always a big challenge while tuning their properties. Here, we designed a cost-effective, novel, green synthetic method for the preparation of perforated hollow mesoporous silica nanoparticles (PHMS-1) using a very minute amount of cationic surfactant in o/w-type (castor oil in water) emulsion at room temperature. The grafting of Al(III) through post-synthetic modification onto this silica framework (PHMS-2, Si/Al ~20 atomic percentage) makes this a very efficient solid acid catalyst for the conversion of monosaccharides to 5-HMF. Brunauer–Emmett–Teller (BET) surface area for the pure silica and Al-doped mesoporous silica nanoparticles (MSNs) were found to be 866 and 660 m2g−1, respectively. Powder XRD, BET and TEM images confirm the mesoporosity of these materials. Again, the perforated hollow morphology was investigated using scanning electron microscopic analysis. Al-doped hollow MSNs were tested for acid catalytic-biomass conversion reactions. Our results show that PHMS-2 has much higher catalytic efficiency than contemporary aluminosilicate frameworks (83.7% of 5-HMF yield in 25 min at 160 °C for fructose under microwave irradiation).

Controlling the Adsorption of β-Glucosidase onto Wrinkled SiO2 Nanoparticles To Boost the Yield of Immobilization of an Efficient Biocatalyst

β-Glucosidase (BG) catalyzes the hydrolysis of cellobiose to glucose, a substrate for fermentation to produce the carbon-neutral fuel bioethanol. Enzyme thermal stability and reusability can be improved through immobilization onto insoluble supports. Moreover, nanoscaled matrixes allow for preserving high reaction rates. In this work, BG was physically immobilized onto wrinkled SiO₂ nanoparticles (WSNs). The adsorption procedure was tuned by varying the BG:WSNs weight ratio to achieve the maximum controllability and maximize the yield of immobilization, while different times of immobilization were monitored. Results show that a BG:WSNs ratio equal to 1:6 wt/wt provides for the highest colloidal stability, whereas an immobilization time of 24 h results in the highest enzyme loading (135 mg/g of support) corresponding to 80% yield of immobilization. An enzyme corona is formed in 2 h, which gradually disappears as the protein diffuses within the pores. The adsorption into the silica structure causes little change in the protein secondary structure. Furthermore, supported enzyme exhibits a remarkable gain in thermal stability, retaining complete folding up to 90 °C. Catalytic tests assessed that immobilized BG achieves 100% cellobiose conversion. The improved adsorption protocol provides simultaneously high glucose production, enhanced yield of immobilization, and good reusability, resulting in considerable reduction of enzyme waste in the immobilization stage.

Recent advances in near-infrared-II hollow nanoplatforms for photothermal-based cancer treatment

Near-infrared-II (NIR-II, 1000–1700 nm) light-triggered photothermal therapy (PTT) has been regarded as a promising candidate for cancer treatment, but PTT alone often fails to achieve satisfactory curative outcomes. Hollow nanoplatforms prove to be attractive in the biomedical field owing to the merits including good biocompatibility, intrinsic physical-chemical nature and unique hollow structures, etc. On one hand, hollow nanoplatforms themselves can be NIR-II photothermal agents (PTAs), the cavities of which are able to carry diverse therapeutic units to realize multi-modal therapies. On the other hand, NIR-II PTAs are capable of decorating on the surface to combine with the functions of components encapsulated inside the hollow nanoplatforms for synergistic cancer treatment. Notably, PTAs generally can serve as good photoacoustic imaging (PAI) contrast agents (CAs), which means such kind of hollow nanoplatforms are also expected to be multifunctional all-in-one nanotheranostics. In this review, the recent advances of NIR-II hollow nanoplatforms for single-modal PTT, dual-modal PTT/photodynamic therapy (PDT), PTT/chemotherapy, PTT/catalytic therapy and PTT/gas therapy as well as multi-modal PTT/chemodynamic therapy (CDT)/chemotherapy, PTT/chemo/gene therapy and PTT/PDT/CDT/starvation therapy (ST)/immunotherapy are summarized for the first time. Before these, the typical synthetic strategies for hollow structures are presented, and lastly, potential challenges and perspectives related to these novel paradigms for future research and clinical translation are discussed.

Phosphate removal and recovery by lanthanum-based adsorbents: A review for current advances

Controlling eutrophication and recovering phosphate from water bodies are hot issues in the 21st century. Adsorption is considered to be the best method for phosphate removal because of its high adsorption efficiency and fast removal rate. Among the many adsorbents, lanthanum (La)-based adsorbents have been paid more and more attention due to their strong affinity to phosphorus. This paper reviews research of phosphate adsorption on La-based adsorbents in different La forms, including lanthanum oxide/hydroxide, lanthanum mixed metal oxide/hydroxide, lanthanum carbonate, La³⁺, La-based metal-organic framework (La-MOF) and La-MOF derivatives. The La-based adsorbents can be loaded on many carriers, such as carbon material, clay minerals, porous silica, polymers, industrial wastes, and others. We find that lanthanum oxide/hydroxide and La³⁺ adsorbents are mostly studied, while those in the forms of lanthanum carbonate, La-MOF, and La-MOF derivatives are relatively few. The kinetic process of most phosphate adsorption is pseudo-second-order and the isotherm process is in accordance with the Langmuir model. The cost of La-based and other traditional adsorbents was compared. The adsorption mechanisms are categorized as electrostatic attraction, ligand exchange, Lewis acid-base interaction, ion exchange and surface precipitation. Besides, regeneration methods of La-based adsorbents are mainly acid, alkali, and salt-alkali. In addition, the La-based adsorbents after absorbing phosphate can be directly used as a slow-release fertilizer. This review provides a basis for the research on phosphate adsorption by La-based adsorbents. It should be carried out to further develop La-based materials with high adsorption capacity and good regeneration ability. Meanwhile, studies have been conducted on the reuse of phosphate after desorption, which needs more attention in future research.

Hollow Silica Microparticles Based on Amphiphilic Polyphosphazenes

Hollow microparticles are important materials, offering a larger surface area and lower density than their solid counterparts. Furthermore, their inner void space can be exploited for the encapsulation and release of guest species in a variety of applications. Herein, we present phosphazene-based silica hollow microparticles prepared via a surfactant-free sol-gel process through self-assembly of the alkoxysilyl-containing polymer in water–ethanol solution. Solely, a silane-derived polyphosphazene was used as the precursor for the microparticle formation, without additional classical silica sources. These novel hollow silica-based microparticles were prepared without surfactant, using a designed amphiphilic polyphosphazene for the particle formation made by two components, a hydrophilic unit consisting of 3-mercaptopropyl(trimethoxysilane), and a hydrophobic unit (dodecanethiol) attached to the double bonds from the poly(allylamine)phosphazene backbone via a thiol-ene photoreaction. Due to these two functionalities, a “vesicle”-like self-assembled structure was formed in the reaction medium, which could be then utilized for the microparticle preparation. The influence of NaOH during the synthesis was shown to affect the size and the wall thickness of the microparticles. This effect may enhance the possibilities to tailor such microparticles for drug delivery purposes or for future controlled release of other substances, such as drugs, fragrances, or anticorrosive pigments.

Manganese-based hollow nanoplatforms for MR imaging-guided cancer therapies

Theranostic nanoplatforms integrating diagnostic and therapeutic functions have received considerable attention in the past decade. Among them, hollow manganese (Mn)-based nanoplatforms are superior since they combine the advantages of hollow structures and the intrinsic theranostic features of Mn²⁺. Specifically, the hollow cavity can encapsulate a variety of small-molecule drugs, such as chemotherapeutic agents, photosensitizers and photothermal agents, for chemotherapy, photodynamic therapy (PDT) and photothermal therapy (PTT), respectively. After degradation in the tumor microenvironment (TME), the released Mn²⁺ is able to act simultaneously as a magnetic resonance (MR) imaging contrast agent (CA) and as a Fenton-like agent for chemodynamic therapy (CDT). More importantly, synergistic treatment outcomes can be realized by reasonable and optimized design of the hollow nanosystems. This review summarizes various Mn-based hollow nanoplatforms, including hollow Mn_xO_y, hollow matrix-supported Mn_xO_y, hollow Mn-doped nanoparticles, hollow Mn complex-based nanoparticles, hollow Mn-cobalt (Co)-based nanoparticles, and hollow Mn-iron (Fe)-based nanoparticles, for MR imaging-guided cancer therapies. Finally, we discuss the potential obstacles and perspectives of these hollow Mn-based nanotheranostics for translational applications.

A pH-Gated Functionalized Hollow Mesoporous Silica Delivery System for Photodynamic Sterilization in Staphylococcus aureus Biofilm

Multidrug-resistant bacteria are increasing, particularly those embedded in microbial biofilm. These bacteria account for most microbial infections in humans. Traditional antibiotic treatment has low efficiency in sterilization of biofilm-associated pathogens, and thus the development of new approaches is highly desired. In this study, amino-modified hollow mesoporous silica nanoparticles (AHMSN) were synthesized and used as the carrier to load natural photosensitizer curcumin (Cur). Then glutaraldehyde (GA) and polyethyleneimine (PEI) were used to seal the porous structure of AHMSN by the Schiff base reaction, forming positively charged AHMSN@GA@PEI@Cur. The Cur delivery system can smoothly diffuse into the negatively charged biofilm of Staphylococcus aureus (S. aureus). Then Cur can be released to the biofilm after the pH-gated cleavage of the Schiff base bond in the slightly acidic environment of the biofilm. After the release of the photosensitizer, the biofilm was irradiated by the blue LED light at a wavelength of 450 nm and a power of 37.4 mV/cm² for 5 min. Compared with the control group, the number of viable bacteria in the biofilm was reduced by 98.20%. Therefore, the constructed pH-gated photosensitizer delivery system can efficiently target biofilm-associated pathogens and be used for photodynamic sterilization, without the production of antibiotic resistance.

Hollow mesoporous silica nanoparticles: Effective silica etching using tri-di- and mono-valent cations

Among different hollow nanostructures, the preparation of hollow mesoporous silica nanoparticles (HMSNs) is still a hotspot research field due to their unique properties e.g., large pore sizes and volumes, high drug loading capacity, ease of surface modification, large surface area, and biodegradability. Herein, novel uniform HMSNs are prepared for the first time by a combination of heterogeneous oil-water biphase stratification and simple mono-, di-, and tri-valent etching reactions. The biphase stratification reaction allows self-assembly of reactants at the oil-water interface, while the subsequent step is designed for the efficient selective silica etching under mild conditions. We have studied the effect of cation's valence (NH₄⁺, Ca²⁺, and Al³⁺) on the silica etching reaction coupled with the biphase stratification reaction both in the absence and presence of the auxiliary pore expanded agent 1, 3, 5 trimethylbenzene (TMB). In the absence of TMB, the Brunauer-Emmett-Teller (BET) analysis confirms that Al³⁺ creates materials with the largest pore size (18.0 nm), whereas the use of NH₄⁺ results in the largest pore volume (2.30 cm³/g). The pores generated using Ca²⁺ and Al³⁺ as silica etching agents have a volume 2.01 cm³/g and 2.05 cm³/g, respectively. Similar experiments in the presence of TMB leads to the formation of HMSN with larger pore sizes (24 nm and 21.5 nm) and volumes (2.70 cm³/g and 2.12 cm³/g) when using Al³⁺ and Ca²⁺, respectively, as etching agents. Drug loading capacity using Langmuir adsorption model indicate our hollow MSN material exhibit the high adsorbing DOX up to 558.23 mg per gram of nanoparticles in pH of 7.2. Furthermore, synthetized NPs exhibited high loading capacity for large protein and biomolecules such as BSA. Our findings confirmed that the charge density of cation has a critical role on selective silica etching in the preparation of HMSNs.

Fabrication of hollow fibrous nanosilica with large pore channels

Selective self-etching of dendritic fibrous nanosilica (DFNS): fabrication of hollow fibrous nanosilica (HFNS) with high specific surface area and large pore channels, and utilization as a robust support for the growth of gold nanoparticles.

Hollow structures as drug carriers: Recognition, response, and release

Hollow structures have demonstrated great potential in drug delivery owing to their privileged structure, such as high surface-to-volume ratio, low density, large cavities, and hierarchical pores. In this review, we provide a comprehensive overview of hollow structured materials applied in targeting recognition, smart response, and drug release, and we have addressed the possible chemical factors and reactions in these three processes. The advantages of hollow nanostructures are summarized as follows: hollow cavity contributes to large loading capacity; a tailored structure helps controllable drug release; variable compounds adapt to flexible application; surface modification facilitates smart responsive release. Especially, because the multiple physical barriers and chemical interactions can be induced by multishells, hollow multishelled structure is considered as a promising material with unique loading and releasing properties. Finally, we conclude this review with some perspectives on the future research and development of the hollow structures as drug carriers.

Interface-Engineered Paclitaxel-Based Hollow Mesoporous Organosilica Nanoplatforms for Photothermal-Enhanced Chemotherapy of Tumor

Having benefited from the combination of different therapeutic modalities, functionalized nanoplatforms with synergistic strategies have aroused great interest in anticancer treatment. Herein, an engineered, a biodegradable hollow mesoporous organosilica nanoparticle (HMON)-based nanoplatform was fabricated for photothermal-enhanced chemotherapy of tumor. For the first time, we demonstrated that HMONs could serve as nanocarriers for co-delivering of both the paclitaxel and photothermal agent new indocyanine green (IR820), denoted as Paclitaxel/IR820@ HMONs-PEG. The as-prepared nanosystem exhibited a high paclitaxel-loading capacity of 28.4%, much higher than most paclitaxel-loaded nanoformulations. Furthermore, incorporating thioether bonds (S-S) into the HMONs' framework endowed them with GSH-responsive biodegradation behavior, leading to the controllable release of drugs under a tumor reducing microenvironment, and hindered the premature release of paclitaxel. Upon being irradiated with an NIR laser, the obtained co-delivery nanosystem exhibited great photothermal properties generated from IR820. The fabricated nanocomposites could significantly suppress tumor growth under NIR laser irradiation, as validated by in vitro and in vivo assessments. Combined with outstanding biocompatibility, the constructed nanosystem holds great potential in combinational antitumor therapy.

Mesoporous Silica Nanoparticle-Based Imaging Agents for Hepatocellular Carcinoma Detection

Hepatocellular carcinoma (HCC) is characterized by poor prognosis and high mortality. The treatment of HCC is closely related to the stage, and the early-stage of HCC patients usually accompanies a more long-term survival rate after clinical treatment. Hence, there are critical needs to develop effective imaging agents with superior diagnostic precision for HCC detection at an early stage. Recently, mesoporous silica nanoparticles (MSNs) based imaging agents have gained extensive attentions in HCC detection, which can serve as a multifunctional nanoplatform with controllable size and facile surface functionalization. This perspective summarizes recent advances in MSNs based imaging agents for HCC detection by the incorporation of several clinical imaging modalities. Multi-modal imaging system has been developed for higher spatial resolution and sensitivity. Even though some limitations and challenges need to be overcome, we envision the development of novel MSNs based imaging agents will offer great potential applications in clinical HCC detection.

A binary carbon@silica@carbon hydrophobic nanoreactor for highly efficient selective oxidation of aromatic alkanes

Nanoreactors with a delimited void space and a large number of mesoporous structures have attracted great attention as potential heterogeneous catalysts. In this work, a cobalt and nitrogen co-doped binary carbon@silica@carbon hydrophobic nanoreactor was synthesized by an in situ synthesis method. Cobalt porphyrin was used as an active component to construct Co-N_x sites, and the purpose of the double carbon layer coating was to enhance the hydrophobicity of the surface of the nanoreactor. The optimal nanoreactor could achieve 96.9% ethylbenzene conversion and 99.1% acetophenone selectivity and showed outstanding universality to many other aromatic alkanes. The superior performance was mainly due to the presence of double carbon layers and the high content of Co-N_x sites. The double hydrophobic carbon layer coating could not only promote the adsorption of organic molecules, but also implant Co-N_x active sites on both the inner and outer surfaces of the nanoreactor. This work proposed a meaningful strategy to obtain a highly efficient nanoreactor for C-H bond oxidation.

Hollow and mesoporous aluminosilica-encapsulated Pt-CoOx for the selective hydrogenation of substituted nitroaromatics

Hollow and mesoporous aluminosilica nanoreactors (HMANs) with Pt-CoO_x cores (∼4.7 nm) and hollow aluminosilica shells (∼50 nm) were designed by a selective etching method. The Pt-CoO_x@HMANs demonstrate a greatly enhanced activity and selectivity for the hydrogenation of various substituted nitroaromatics compared to Pt@HMANs and Pt-CoO_x@SiO₂.

Combination of Selective Etching and Impregnation toward Hollow Mesoporous Bioactive Glass Nanoparticles

In this study, binary SiO2-CaO hollow mesoporous bioactive glass nanoparticles (HMBGNs) are prepared by combing selective etching and impregnation strategies. Spherical silica particles (SiO2 NPs) are used as hard cores to assemble cetyltrimethylammonium bromide (CTAB)/silica shells, which are later removed by selective etching to generate a hollow structure. After the removal of CTAB by calcination, the mesoporous shell of particles is formed. Calcium (Ca) is incorporated into the particles using impregnation by soaking the etched SiO2 NPs in calcium nitrate aqueous solution. The amount of incorporated Ca is tailorable by controlling the ratio of SiO2 NPs:calcium nitrate in the soaking solution. The produced HMBGNs are bioactive, as indicated by the rapid formation of hydroxyapatite on their surfaces after immersion in simulated body fluid. In a direct culture with MC3T3-E1 cells, HMBGNs were shown to exhibit concentration-dependent cytotoxicity and can stimulate osteogenic differentiation of MC3T3-E1 cells at concentrations of 1, 0.5, and 0.25 mg/mL. Our results indicate that the combination of selective etching and impregnation is a feasible approach to produce hierarchical HMBGNs. The produced hollow particles have potential in drug delivery and bone tissue regeneration applications, and should be further investigated in detailed in vitro and in vivo studies.

Engineering of smart nanoconstructs for delivery of glucagon-like peptide-1 analogs

Glucagon-like peptide-1 (GLP-1) receptor agonists are being increasingly exploited in clinical practice for management of type 2 diabetes mellitus due to their ability to lower blood glucose levels and reduce off-target effects of current therapeutics. Nanomaterials had viewed myriad breakthroughs in protecting peptides against degradation and carrying therapeutics to targeted sites for maximizing their pharmacological activity and overcoming limitations associated with their application. This review highlights the latest advances in designing smart multifunctional nanoconstructs and engineering targeted and stimuli-responsive nanoassemblies for delivery of GLP-1 receptor agonists. Furthermore, advanced nanoconstructs of sophisticated supramolecular assembly yet efficient delivery of GLP-1/GLP-1 analogs, nanodevices that mediate intrinsic GLP-1 secretion per se, and nanomaterials with capabilities to load additional moieties for synergistic antidiabetic effects, are demonstrated.

Recent Trends in Morphology-Controlled Synthesis and Application of Mesoporous Silica Nanoparticles

The outstanding journey towards the investigation of mesoporous materials commences with the discovery of high surface area porous silica materials, named MCM-41 (Mobil Composition of Matter-41) according to the inventors' name Mobile scientists in the United States. Based on a self-assembled supramolecular templating mechanism, the synthesis of mesoporous silica has extended to wide varieties of silica categories along with versatile applications of all these types in many fields. These silica families have some extraordinary structural features, like highly tunable nanoscale sized pore diameter, good Brunauer-Emmett-Teller (BET) surface areas, good flexibility to accommodate different organic and inorganic functional groups, metals etc., onto their surface. As a consequence, thousands of scientists and researchers throughout the world have reported numerous silica materials in the form of published articles, communication, reviews, etc. Beside this, attention is also given to the morphology-oriented synthesis of silica nanoparticles and their significant effects on the emerging fields of study like catalysis, energy applications, sensing, environmental, and biomedical research. This review highlights a consolidated overview of those morphology-based mesoporous silica particles, emphasizing their syntheses and potential role in many promising fields of research.

Mesoporous Silica Nanoparticles in Bioimaging

A biomedical contrast agent serves to enhance the visualisation of a specific (potentially targeted) physiological region. In recent years, mesoporous silica nanoparticles (MSNs) have developed as a flexible imaging platform of tuneable size/morphology, abundant surface chemistry, biocompatibility and otherwise useful physiochemical properties. This review discusses MSN structural types and synthetic strategies, as well as methods for surface functionalisation. Recent applications in biomedical imaging are then discussed, with a specific emphasis on magnetic resonance and optical modes together with utility in multimodal imaging.

DDAO Controlled Synthesis of Organo-Modified Silica Nanoparticles with Encapsulated Fluorescent Boron Dipyrrins and Study of Their Uptake by Cancerous Cells

The design of cargo carriers with high biocompatibility, unique morphological characteristics, and capability of strong bonding of fluorescent dye is highly important for the development of a platform for smart imaging and diagnostics. In this paper, BODIPY-doped silica nanoparticles were prepared through a “one-pot” soft-template method using a sol-gel process. Several sol-gel precursors have been used in sol-gel synthesis in the presence of soft-template to obtain the silica-based materials with the most appropriate morphological features for the immobilization of BODIPY molecules. Obtained silica particles have been shown to be non-cytotoxic and can be effectively internalized into the cervical cancer cell line (HeLa). The described method of synthesis allows us to obtain silica-based carriers with an immobilized fluorescent dye that provide the possibility for real-time imaging and detection of these carriers.

Highly Hierarchical Fibrillar Biogenic Silica with Mesoporous Structure Derived from the Perennial Plant Equisetum Fluviatile

A new discovery of highly hierarchical fibrillar biogenic silica with mesoporous structure derived from the perennial plant Equisetum fluviatile was made. By removing the organic compounds through chemical and heat treatment, the biogenic silica skeleton can largely retained the original highly hierarchical structure of the plant stems. Infrared spectra, X-ray diffraction, and small-angle X-ray scattering, as well as nitrogen sorption analysis, were employed to characterize the crystalline phases, nanostructure, and porosity of the resulting material. Scanning electron microscopy and transmission electron microscopy investigation reveal that the biogenic silica are fibers with diameters of about 120-150 μm and lengths of more than a few centimeters. These fibers consist of smaller fasciculus with diameters of about 5-15 μm that are composed of three levels of particles with mass and surface fractal characteristics: primary particles on the order of 3-5 nm, secondary particles on the order of 9-12 nm, and tertiary particles on the order of 90-120 nm in size. It is also shown that the biogenic silica have mesoporous structure with an average pore size of 4-6 nm and a specific surface of 100-300 m²/g. Heat treatment at high temperature and residual K⁺ significantly affects the characteristics of the mesoporous structure of the biogenic silica, although it has little effect on the surface fractal structure of the secondary particles.

Silica-Coated Magnetic Nanocomposites for Pb2+ Removal from Aqueous Solution

Magnetic iron oxide-silica shell nanocomposites with different iron oxide/silica ratio were synthesized and structurally characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), small-angle neutron scattering, magnetic and N2-sorption studies. The composite that resulted with the best properties in terms of contact surface area and saturation of magnetization was selected for Pb2+ adsorption studies from aqueous media. The material presented good absorption capacity (maximum adsorption capacity 14.9 mg·g−1) comparable with similar materials presented in literature. Its chemico-physical stability and adsorption capacity recommend the nanocomposite as a cheap adsorbent material for lead.

The Synthesis of Hollow/Porous Cu2O Nanoparticles by Ion-Pairing Behavior Control

Owing to the properties of low density, large surface areas, excellent loading capacity, high permeability, and interstitial hollow spaces, hollow nanostructures have been widely applied in many important research fields, such as catalysis, drug-controlled release, confined synthesis, optics and electronics, and energy storage. This work provided a simple platform for hollow Cu2O nanostructure synthesis based on the surfactant controlling methodology, which is under the supposed mechanism of ion-pairing behavior at the initial nucleation stage. Thus here, we explore our system in two different directions: (1) we get different types of hollow Cu2O nanoparticles by controlling the surfactant concentration during the synthesis step in colloids, which is critical to the novel structure design and potential application in many different areas and (2) we explore the method to Cu2O hollow particle synthesis to test the hypothesis of the ion-pairing behavior during the initial nucleation by tuning the solvent ratio, cation concentration (such as NH4NO3 addition amount difference in the synthetic step), and selective etching. By tuning the synthetic conditions as well as designing control experiments, we hope to provide a solid understanding of the crystal growth mechanism. Our improved understanding in similar systems (both Cu2O and ZnO systems) will make it easier for interpreting nanostructure formation in new discoveries and, more importantly, in rationally designing various complex nanostructures based on a bottom-up strategy.

Hydrophilic Ultralong Organic Nanophosphors

Ultralong organic phosphorescence (UOP), enabling of persistent luminescence after removal of external excitation light, shows great promise in biological applications such as bioimaging in virtue of antibackground fluorescence interference. Despite of good biocompatibility and outstanding phosphorescent properties, most current organic phosphors are hydrophobic with poor water solubility in the form of bulk crystal with large size, limiting their potential in the biological field. Here, a facile and versatile approach is provided to obtain nanoscale hydrophilic phosphorescent phosphors (HPPs) by physically loading ultralong organic phosphors into hollow mesoporous silica nanoparticles. The as-prepared HPPs can be well suspended in aqueous solution and effectively internalized by HeLa cells with very low cytotoxicity. Such HPPs are successfully applied for afterglow bioimaging in living nude mice with a very high signal-to-noise ratio up to 31. The current study not only provides a universal strategy to realize UOP in aqueous media but also demonstrates their great potential for biomedical purposes as an advanced imaging indicator with long-lived emission lifetime.

Patchy Templated Synthesis of Macroporous Colloidal Hollow Spheres and Their Application as Catalytic Microreactors

Porous colloidal hollow spheres have been applied to diversified fields over the past few decades. However, developing simple and efficient methods to prepare such porous hollow spheres with macro pores remains a challenge. To address this problem, we present a patchy templated synthesis route, which can be used to prepare such colloidal hollow spheres that have macro pores through the shells. This was achieved by using patchy poly(styrene-co-sodium styrenesulfonate) spheres as the template and poly(allylamine hydrochloride) as binding molecules. SiO₂ can site-selectively only grow on one kind of patch, resulting in the formation of porous hollow spheres. The pore sizes can be tuned from ∼50 to 400 nm. The resulting porous hollow spheres have a Janus character so that Au nanoparticles can only be attached to the interior surfaces in situ, which can be used as catalytic microreactors and show the catalytic performance of pore size dependence.