Clay Nanosheet-Based Nanocomposite Supramolecular Hydrogel Enabling Rapid, Reversible Phase Transition Only with Visible Light

High mechanical properties and rapid sol/gel phase transition are mutually exclusive in the hydrogels reported to date, most likely because the 3D crosslinked networks of mechanically robust hydrogels comprise bundled thick fibers that are not rapidly dissociable or formable. Herein, we report a visible light-responsive hydrogel that showed a rapid, reversible sol/gel phase transition despite its relatively high mechanical properties (storage modulus ~103 Pa). To construct its 3D crosslinked network, we used a design strategy analogous to that employed for our highly water-rich yet mechanically robust nanocomposite supramolecular hydrogel ("aqua material"). In this case, multiple poly(ethylene glycol) chains carrying ortho-tetramethoxyazobenzene termini (AzoPEG) were noncovalently crosslinked by clay nanosheets (CNSs) with surface-immobilized β-cyclodextrin units using their seven guanidinium ion (Gu+) pendants (GuCD) via a multivalent salt-bridge. When exposed to visible light at 625 and 450 nm, the azobenzene termini isomerized from trans-to-cis and cis-to-trans, respectively, and were detached from and attached to the surface-immobilized GuCD units. The advantage of this CNS-based nanocomposite supramolecular system is its simple 3D network structure, which forms and breaks rapidly without slow chain entangling and disentangling processes.

Tunable Coassembly of Octaarginine with Thiazolyl Benzenesulfonamides Exerts Variable Antibacterial Activity

The cationic peptide octaarginine (R8) is a prominent cell-penetrating peptide and has been extensively researched as a carrier of diverse cell-destined cargo. In this work, we describe the coassembly of R8 with small molecule thiazolyl benzenesulfonamide (TBS) derivatives. Physical complexation of R8 with three TBS derivatives across a range of weight ratios results in the formation of a distinctive set of nano- and microstructures. A detailed structural characterization of the R8:TBS-derivative coassemblies has been performed by a combination of FTIR, XRD, SEM, and DSC. The major functional groups that facilitate coassembly include sulfonamide SO2 and NH groups of the TBS derivatives, and the guanidinium of R8, via a combination of cation-π and hydrogen-bonding interactions. The R8:4F-TBS coassembly displays singular topological features compared to R8:4Br-TBS and R8:4CH3-TBS complexes. These differences are attributed to the changes in the preferred orientation of the guanidino groups of R8 with respect to the π-surface of TBS derivatives. The modulation of forces of interaction across the R8:TBS-derivative coassemblies aligns with their respective thermal stabilities. The single-crystal structure of bare 4F-TBS has been subjected to Hirshfeld and 2D fingerprinting analysis and indicates notable variations from the crystal packing of the R8:4F-TBS coassembly. The structural differences among the R8:TBS-derivative coassemblies correlate with distinctive profiles of antibacterial activity in each case. The coassembled structures exert a variable extent of bacterial membrane disruption and damage based on the unique disposition of R8 and the potency of small molecule in each case. The aqueous suspension of R8:4F-TBS displays significant outer membrane disruption and bacterial killing compared with the other complexes. This work successfully demonstrates the hitherto unreported potential for coassembly of cell-penetrating peptides with other entities. The coassembly of R8 with small molecules highlights an attractive strategy for tuning the functional properties of each component.

Reversibly Tuning the Viscosity of Peptide-Based Solutions Using Visible Light

Light can be used to design stimuli-responsive systems. We induce transient changes in the assembly of a low molecular weight gelator solution using a merocyanine photoacid. Through our approach, reversible viscosity changes can be achieved via irradiation, delivering systems where flow can be controlled non-invasively on demand.

Photocontrol of the β-Hairpin Polypeptide Structure through an Optimized Azobenzene-Based Amino Acid Analogue

A family of neurodegenerative diseases, including Huntington's disease (HD) and spinocerebellar ataxias, are associated with an abnormal polyglutamine (polyQ) expansion in mutant proteins that become prone to form amyloid-like aggregates. Prior studies have suggested a key role for β-hairpin formation as a driver of nucleation and aggregation, but direct experimental studies have been challenging. Toward such research, we set out to enable spatiotemporal control over β-hairpin formation by the introduction of a photosensitive β-turn mimic in the polypeptide backbone, consisting of a newly designed azobenzene derivative. The reported derivative overcomes the limitations of prior approaches associated with poor photochemical properties and imperfect structural compatibility with the desired β-turn structure. A new azobenzene-based β-turn mimic was designed, synthesized, and found to display improved photochemical properties, both prior and after incorporation into the backbone of a polyQ polypeptide. The two isomers of the azobenzene-polyQ peptide showed different aggregate structures of the polyQ peptide fibrils, as demonstrated by electron microscopy and solid-state NMR (ssNMR). Notably, only peptides in which the β-turn structure was stabilized (azobenzene in the cis configuration) closely reproduced the spectral fingerprints of toxic, β-hairpin-containing fibrils formed by mutant huntingtin protein fragments implicated in HD. These approaches and findings will enable better deciphering of the roles of β-hairpin structures in protein aggregation processes in HD and other amyloid-related neurodegenerative diseases.

Photoresponsive peptide materials: Spatiotemporal control of self-assembly and biological functions

Peptides work as both functional molecules to modulate various biological phenomena and self-assembling artificial materials. The introduction of photoresponsive units to peptides allows the spatiotemporal remote control of their structure and function upon light irradiation. This article overviews the photoresponsive peptide design, interaction with biomolecules, and applications in self-assembling materials over the last 30 years. Peptides modified with photochromic (photoisomerizable) molecules, such as azobenzene and spiropyran, reversibly photo-controlled the binding to biomolecules and nanostructure formation through self-assembly. Photocleavable molecular units irreversibly control the functions of peptides through cleavage of the main chain and deprotection by light. Photocrosslinking between peptides or between peptides and other biomolecules enhances the structural stability of peptide assemblies and complexes. These photoresponsive peptides spatiotemporally controlled the formation and dissociation of peptide assemblies, gene expressions, protein-drug interactions, protein-protein interactions, liposome deformation and motility, cytoskeleton structure and stability, and cell functions by appropriate light irradiation. These molecular systems can be applied to photo-control biological functions, molecular robots, artificial cells, and next-generation smart drug delivery materials.

Dramatic morphological changes in liposomes induced by peptide nanofibers reversibly polymerized and depolymerized by the photoisomerization of spiropyran

Cytoskeletons such as microtubules and actin filaments are natural protein assemblies, which dynamically control cellular morphology by reversible polymerization/depolymerization. Recently, the control of polymerization/depolymerization of fibrous protein/peptide assemblies by external stimuli has attracted significant attention. However, as far as we know, the creation of an “artificial cytoskeleton” that reversibly controls the polymerization/depolymerization of peptide nanofiber in giant unilamellar vesicles (GUVs) has not been reported. Here, we developed peptide nanofiber self-assembled from spiropyran (SP)-modified β-sheet-forming peptides, which can be reversibly polymerized/depolymerized by light. The reversible photoisomerization of the SP-modified peptide (FKFECSPKFE) to the merocyanine-peptide (FKFECMCKFE) by ultraviolet (UV) and visible light irradiation was confirmed by UV–visible spectroscopy. Confocal laser scanning microscopy with thioflavin T staining and transmission electron microscopy of the peptides showed that the SP-peptide formed β-sheet nanofibers, whereas the photoisomerization to the merocyanine-peptide almost completely dissociated the nanofibers. The merocyanine peptide was encapsulated in spherical GUVs comprising of phospholipids as artificial cell models. Interestingly, the morphology of GUV encapsulating the merocyanine-peptide dramatically changed into worm-like vesicles by the photoisomerization to the SP-modified peptide, and then reversibly changed into spherical GUV by the photoisomerization to the MC-modified peptide. These dynamic morphological changes in GUVs by light can be applied as components of a molecular robot with artificially controlled cellular functions.

Peptide-Based Low Molecular Weight Photosensitive Supramolecular Gelators

Over the last couple of decades, stimuli-responsive supramolecular gels comprising synthetic short peptides as building blocks have been explored for various biological and material applications. Though a wide range of stimuli has been tested depending on the structure of the peptides, light as a stimulus has attracted extensive attention due to its non-invasive, non-contaminant, and remotely controllable nature, precise spatial and temporal resolution, and wavelength tunability. The integration of molecular photo-switch and low-molecular-weight synthetic peptides may thus provide access to supramolecular self-assembled systems, notably supramolecular gels, which may be used to create dynamic, light-responsive "smart" materials with a variety of structures and functions. This short review summarizes the recent advancement in the area of light-sensitive peptide gelation. At first, a glimpse of commonly used molecular photo-switches is given, followed by a detailed description of their incorporation into peptide sequences to design light-responsive peptide gels and the mechanism of their action. Finally, the challenges and future perspectives for developing next-generation photo-responsive gels and materials are outlined.

ß-Sheet Induced Helical Self-Assembly Structure Formation by Dityrosine Dipeptide: Crystallographic Evidence and Other Biophysical Studies

Self-assembled structures derived from short peptides are a versatile class of organic building blocks which have shown great potential in a wide range of domains. In the current study, side-chain protected dityrosine based short peptide (TP) was synthesized, and its conformation accompanied by a self-assembly pattern was investigated through several spectroscopic studies and single crystal X-ray analysis. The single crystal X-ray analysis of TP confirmed that it exhibited a ß-sheet pattern which further self-assembled to form ß-sheet-promoted helical architectures by various noncovalent interactions. To the best of our knowledge, this is the first crystallographic report of a side-chain protected dityrosine based short peptide adopting ß-sheet-promoted helical structures. Morphological analysis of TP also revealed ß-sheet as well as helical conformations. NMR study suggested that both amide hydrogens of TP are involved in intermolecular hydrogen bonding. Moreover, CD spectroscopy established the self-assembly phenomenon of TP in the solution state by showing both corresponding ß-sheet and α-helix bands. Hirshfeld surface analysis and DFT study also concluded similar results. These kinds of small peptide units mimicking important protein secondary structures like helical assembly would be of pivotal significance as they may act as small peptidomimetics, mimicking the protein "Hotspot" area.

Aromatic Dipeptide Homologue-Based Hydrogels for Photocontrolled Drug Release

Peptide-based hydrogels are considered of special importance due to their biocompatibility and biodegradability. They have a wide range of applications in the biomedical field, such as drug delivery, tissue engineering, wound healing, cell culture media, and biosensing. Nevertheless, peptide-based hydrogels composed of natural α-amino acids are limited for in vivo applications because of the possible degradation by proteolytic enzymes. To circumvent this issue, the incorporation of extra methylene groups within the peptide sequence and the protection of the terminal amino group can increase the enzymatic stability. In this context, we investigated the self-assembly capacity of aromatic dipeptides (Boc-α-diphenylalanine and Boc-α-dityrosine) and their β- and γ-homologues and developed stable hydrogels. Surprisingly, only the Boc-diphenylalanine analogues were able to self-assemble and form hydrogels. A model drug, l-ascorbic acid, and oxidized carbon nanotubes (CNTs) or graphene oxide were then incorporated into the hydrogels. Under near-infrared light irradiation, the photothermal effect of the carbon nanomaterials induced the destabilization of the gel structure, which caused the release of a high amount of drug, thus providing opportunities for photocontrolled on-demand drug release.

Amino acid derivative-based Ln-metallohydrogels with multi-stimuli responsiveness and applications

Metallohydrogels and lanthanide (Ln) fluorescent materials have gained much attention recently. In this study, we designed and synthesized a facile gelator of a phenylalanine-based derivative containing an indazole group (namely IZF). It was found that IZF can self-assemble to form hydrogel at pH ≤ 7. Meanwhile, IZF and Tb³⁺/Eu³⁺ can co-assemble to generate IZF-Tb and IZF-Eu metallohydrogels with green and red fluorescence, respectively, at pH 8-11, with excellent multi-stimuli responsiveness. The bimetallic hydrogels of IZF-Tb/Eu exhibit different colors under UV light by adjusting the ratio of Tb³⁺ and Eu³⁺. Moreover, white light emission was achieved with IZF-Tb/Eu bimetallic gels through doping carbon dots (CDs) by tailoring the stoichiometric ratio of Ln-complex and CDs. Remarkably, IZF-Tb and IZF-Eu could be used as fluorescent inks with excellent stability. This study indicates that the amino acid derivative-based Ln-metallohydrogels are excellent candidates for constructing information storage and multiple anti-counterfeiting materials.

Magneto-responsive hydrogels by self-assembly of low molecular weight peptides and crosslinking with iron oxide nanoparticles

Hydrogels that respond to non-invasive, external stimuli such as a magnetic field are of exceptional interest for the development of adaptive soft materials. To date magneto tuneable gels are predominantly based on macromolecular building blocks, while comparable low molecular weight systems are rarely found in the literature. Herein, we report a highly efficient peptide-based gelator (Nap GFYE), which can form hydrogels and incorporate Fe3O4 superparamagnetic nanoparticles in the gel matrix. The magnetic nanoparticles act as a physical crosslinker for the self-assembled peptide nanostructures and thus give rise to a fortified hybrid gel with distinctively improved mechanical properties. Furthermore, the particles provide the material with magnetic susceptibility and a gel to sol transition is observed upon application of a weak magnetic field. Magnetization of the inorganic-organic hybrid nanomaterial leads to on-demand release of an incorporated fluorescent dye into the supernatant.

Ultra-Low Molecular Weight Photoswitchable Hydrogelators

Two photoswitchable arylazopyrozoles form hydrogels at a concentration of 1.2 % (w/v). With a molecular weight of 258.28 g mol^-1 , these are the lowest known molecular weight hydrogelators that respond reversibly to light. Photoswitching of the E- to the Z-form by exposure to 365 nm light results in a macroscopic gel→sol transition; nearly an order of magnitude reduction in the measured elastic and loss moduli. In the case of the meta-arylazopyrozole, cryogenic transmission electron microscopy suggests that the 29±7 nm wide sheets in the E-gel state narrow to 13±2 nm upon photoswitching to the predominantly Z-solution state. Photoswitching for meta-arylazopyrozole is reversible through cycles of 365 nm and 520 nm excitation with little fatigue. The release of a rhodamine B dye encapsulated in gels formed by the arylazopyrozoles is accelerated more than 20-fold upon photoswitching with 365 nm light, demonstrating these materials are suitable for light-controlled cargo release.

Recent Progress in the Design and Application of Supramolecular Peptide Hydrogels in Cancer Therapy

Supramolecular peptide hydrogel (SPH) is a class of biomaterials self-assembled from peptide-based gelators through non-covalent interactions. Among many of its biomedical applications, the potential of SPH in cancer therapy has been vastly explored in the past decade, taking advantage of its good biocompatibility, multifunctionality, and injectability. SPHs can exert localized cancer therapy and induce systemic anticancer immunity to prevent tumor recurrence, depending on the design of SPH. This review first gives a brief introduction to SPH and then outlines the major types of peptide-based gelators that have been developed so far. The methodologies to tune the physicochemical properties and biological activities are summarized. The recent advances of SPH in cancer therapy as carriers, prodrugs, or drugs are highlighted. Finally, the clinical translation potential and main challenges in this field are also discussed.

Photoresponsive hybrid hydrogel with a dual network of agarose and a self-assembling peptide

Responsive hybrid hydrogels composed of a self-assembling low molecular weight gelator and a polymeric network are of particular interest for the development of smart nanomaterials. Key advantages of such hybrid hydrogels are their ease in preparation as well as their unique mechanical properties. Herein we describe a photoresponsive peptide AAP-FGDS, which exhibits excellent photochemical properties and highly reversible changes in the rheological properties. Addition of AAP-FGDS to a covalent, non-responsive agarose network gives rise to a robust hybrid hydrogel with phototunable mechanical properties and shape memory. Upon irradiation with UV light the self-assembled three dimensional structure disaggregates to yield a softer yet self-supporting hydrogel. Irradiation with visible light followed by the reassembly of the peptide allows the fixation of a different shape programmed by mechanical deformation. Upon repeated deactivation of the peptide network the original shape is recovered.

Magneto- and photo-responsive hydrogels from the co-assembly of peptides, cyclodextrins, and superparamagnetic nanoparticles

Dual response to external non-invasive stimuli, such as light and magnetic field, is a highly desirable property in soft nanomaterials with potential applications in soft robotics, tissue engineering, and life-like materials. Within this class of materials, hydrogels obtained from the self-assembly of low molecular weight gelators (LMWGs) are of special interest due to their ease of preparation and modification. Herein, we report a modular co-assembly strategy for a magneto- and photo-responsive supramolecular hydrogel based on the arylazopyrazole (AAP) modified pentapeptide gelator Nap-GFFYS, and β-cyclodextrin vesicles (CDVs) with superparamagnetic cobalt ferrite nanoparticles embedded in their membranes. Upon application of a magnetic field, a reversible increase in the storage modulus is observed during rheological measurements. Additionally, a gel rod could be manipulated with a weak permanent magnet, resulting in macroscopic bending of the rod. Furthermore, through irradiation with UV and visible light, respectively, the host-guest interaction between the AAP moiety and the hydrophobic cavity of the β-CD can be deactivated on demand, thus lowering the stiffness of the hydrogel reversibly.

Photoresponsive Zn2+-specific metallohydrogels coassembled from imidazole containing phenylalanine and arylazopyrazole derivatives

Stimuli-responsive supramolecular gels and metallogels have been widely explored in the past decade, but the fabrication of metallogels with reversible photoresponsive properties remains largely unexplored.

Ultrasound-induced emission color and transmittance changes of organogel based on "trans-to-cis" isomerization

Herein, instant and precise control of fluorescent emission color and transmittance could be carried out by ultrasound-promoted gel-to-gel transition of naphthalimide derivatives containing CN unit. It is proved that ultrasound triggered an irreversible and efficient configuration transformation of N1 from "trans to cis" form in gel state, which is stabilized by intermolecular hydrogen bonding interaction and not observed in the solution state.

Circularly polarized light modulated supramolecular self-assembly for an azobenzene-based chiral gel

UV light-triggered trans-to-cis isomerization of azobenzene usually results in the collapse of a self-assembly system owing to the breaking of molecular planarity. Interestingly, two totally opposite self-assembly trends have been detected when a C 2v-symmetric chiral gelator was irradiated by a circularly polarized light (CPL) with specific handedness, indicating that CPL could become a powerful tool in modulating the assembly behaviour of the photo-responsive system.

Chiral, thermal-responsive hydrogels containing helical hydrophilic polyacetylene: preparation and enantio-differentiating release ability

Chiral hydrogels constructed from helical hydrophilic polyacetylene demonstrate chirality, thermo-responsivity, biocompatibility and enantio-selective release ability towards chiral drugs.

NIR light-responsive short peptide/2D NbSe2 nanosheets composite hydrogel with controlled-release capacity

The design of light-responsive peptide hydrogels with controllable drug release characteristics is still a challenge.

A Natural Glycyrrhizic Acid-Tailored Light-Responsive Gelator

The construction of stimuli-responsive materials by using naturally occurring molecules as building blocks has received increasing attention owing to their bioavailability, biocompatibility, and biodegradability. Herein, a symmetrical azobenzene-functionalized natural glycyrrhizic acid (trans-GAG) was synthesized and could form stable supramolecular gels in DMSO/H₂ O and MeOH/H₂ O. Owing to trans-cis isomerization, this gel exhibited typical light-responsive behavior that led to a reversible gel-sol transition accompanied by a variation in morphology and rheology. Additionally, this trans-GAG gel displayed a distinct injectable self-healing property and outstanding biocompatibility. This work provides a simple yet rational strategy to fabricate stimuli-responsive materials from naturally occurring, eco-friendly molecules.

Phenylalanine and derivatives as versatile low-molecular-weight gelators: design, structure and tailored function

Phenylalanine (Phe) is an essential amino acid classified as neutral and nonpolar due to the hydrophobic nature of the benzyl side chain.

Injectable self-assembled peptide hydrogels for glucose-mediated insulin delivery

Closed-loop glucose-responsive insulin delivery with excellent biocompatibility has the potential to improve the health and quality of life of diabetic patients.

Fabrication of chiroptically switchable films via co-gelation of a small chiral gelator with an achiral azobenzene-containing polymer

Helical polymers are widely found in nature and synthetic functional materials. Although a number of elaborate strategies have been developed to endow polymers with helicity through either covalent bonds or supramolecular techniques, it still remains a challenge to get the desired helical polymers with controlled handedness in an easy but effective manner. In this study, we report an easily accessible gelation-guided self-assembly system where the chirality of a gelator can be easily transferred to an achiral azobenzene-containing polymer during gelation. It is found that during the process of chiral induction, the induced chirality of the polymer was entirely dominated by the molecular chirality of the gelator. Experimentally, achiral azobenzene-containing polymers with different side-chain lengths were doped into a supramolecular gel system formed with amphiphilic N,N'-bis-(octadecyl)-l(d)-Boc-glutamic (LBG-18 or DBG-18 for short). CD spectra and SEM observation confirmed that the co-assembly of polymer/LBG-18 or polymer/DBG-18 in the xerogel state exhibited supramolecular chirality. More importantly, alternate UV and visible light irradiation on the xerogel film caused the induced CD signal to switch between on and off states. Thus a chiroptical switch was fabricated based on the isomerization of the azo-polymer in xerogel films.

Scaleable two-component gelator from phthalic acid derivatives and primary alkyl amines: acid-base interaction in the cooperative assembly

A series of phthalic acid derivatives (P) with a carbon-chain tail was designed and synthesized as single-component gelators. A combination of the single-component gelator P and a non-gelling additive n-alkylamine A through acid-base interaction brought about a series of novel phase-selective two-component gelators PA. The gelation capabilities of P and PA, and the structural, morphological, thermo-dynamic and rheological properties of the corresponding gels were investigated. A molecular dynamics simulation showed that the H-bonding network in PA formed between the NH of A and the carbonyl oxygen of P altered the assembly process of gelator P. Crude PA could be synthesized through a one-step process without any purification and could selectively gel the oil phase without a typical heating-cooling process. Moreover, such a crude PA and its gelation process could be amplified to the kilogram scale with high efficiency, which offers a practical economically viable solution to marine oil-spill recovery.

Ultraviolet Patterned Calixarene-Derived Supramolecular Gels and Films with Spatially Resolved Mechanical and Fluorescent Properties

Supramolecular assemblies have in the past been considered mechanically weak and in most cases unable to withstand their own weight. Calixarene-derived networks can, however, provide robust supramolecular gels. Incorporating a photoreactive stilbene moiety, we show that the aggregation state of the material can be tuned by heating and UV exposure in order to control the mechanical as well as the fluorescent properties. Regulating the extent of heating to control the proportion of H-aggregates and J-aggregates and further cross-linking of H-aggregates by control over UV exposure allows for adjustable photopatterning of the fluorescence as well as the material stiffness in the range from ∼100 to 450 kPa. We expect this straightforward supramolecular system will be suitable for advanced prototyping in applications where modulus and shape are important design criteria.

pH-sensitive peptide hydrogel for glucose-responsive insulin delivery

Glucose-responsive system is one of important options for self-regulated insulin delivery to treat diabetes, which has become an issue of great public health concern in the world. In this study, we developed a novel and biocompatible glucose-responsive insulin delivery system using a pH-sensitive peptide hydrogel as a carrier loaded with glucose oxidase, catalase and insulin. The peptide could self-assemble into hydrogel under physiological conditions. When hypoglycemia is encountered, neighboring alkaline amino acid side chains are significantly repulsed due to reduced local pH by the enzymatic conversion of glucose into gluconic acid. This is followed by unfolding of individual hairpins, disassembly and release of insulin. The glucose-responsive hydrogel system was characterized on the basis of structure, conformation, rheology, morphology, acid-sensitivity and the amount of consistent release of insulin in vitro and vivo. The results illustrated that our system can not only regulate the blood glucose levels in vitro but also in mice models having STZ-induced diabetes.

STATEMENT OF SIGNIFICANCE

In this report, we have shown the following significance supported by the experimental results. 1. We successfully developed, characterized and screened a novel pH-responsive peptide. 2. We successfully developed a novel and biocompatible pH-sensitive peptide hydrogel as glucose-responsive insulin delivery system loaded with glucose oxidase, catalase and insulin. 3. We successfully confirmed that the hydrogel platform could regulate the blood glucose level in vitro and in vivo. Overall, we have shown enough significance and novelty with this smart hydrogel platform in terms of biomaterials, peptide chemistry, self-assembly, hydrogel and drug delivery. So we believe this manuscript is suitable for Acta Biomaterialia.

Temperature and ion dual responsive biphenyl-dipeptide supramolecular hydrogels as extracellular matrix mimic-scaffolds for cell culture applications

Illustration of the gelation process of a new aromatic short peptide gelator based on biphenyl and its application in cell culture.

Hierarchical supramolecular hydrogels: self-assembly by peptides and photo-controlled release via host–guest interaction

Using photoresponsive host–guest chemistry, three different payloads can be photo-released successively from the same peptide hydrogel.

A photo-polymerized poly(Nε-acryloyl l-lysine) hydrogel for 3D culture of MCF-7 breast cancer cells

The most common in vitro cell culture platform, standard two-dimensional (2D) monolayer cell culture, often fails to mimic the tumor microenvironment, while animal models complicate research on the effect of individual factors on cell behaviors. Both are unsatisfactory in the research of molecular mechanisms of tumor development and progression and the discovery and development of anticancer drugs. In vitro three-dimensional (3D) cell culture can partially simulate in vivo conditions and 3D-cultured cancer cells can recapture many essential features of native tumor tissues. In this study, to mimic the in vivo breast tumor microenvironment, novel reduction-responsive poly(N_ε-acryloyl l-lysine) (pLysAAm) hydrogels were synthesized by rapid photo-polymerization of N_ε-acryloyl l-lysine and using N,N'-bis(acryloyl)-(l)-cystine as a crosslinker, and their physicochemical properties were characterized systemically. The results showed that the pLysAAm hydrogels were formed within 93 s under UV irradiation and exhibited almost total elastic recovery from compressions as high as 75%. The lyophilized hydrogel samples displayed a highly porous structure with interconnected pores, had an equilibrium swelling ratio of about 20, and were degraded faster in a glutathione-containing solution than in PBS solution. The biological versatility of the pLysAAm hydrogels was demonstrated by both in vitro MCF-7 cell culture and in vivo tumor formation. Compared to cells cultured as 2D monolayers, the 3D-cultured cells presented 3D cell morphology, exhibited better cell viability, expressed higher levels of pro-angiogenic factors, and showed significantly greater migration and invasion abilities. The results from assay of tumorigenicity in nude mice and histologic analysis demonstrated the enhanced tumorigenic and angiogenic capabilities of the MCF-7 cells pre-cultured in pLysAAm hydrogels. These findings suggest that pLysAAm hydrogels may be used to bridge the gap between standard in vitro cell cultures and living tissues, aid breast cancer research, and help researchers to develop novel anticancer therapeutics.

Tripeptide consisting of benzyl protected di-cysteine and phenylalanine forms spherical assembly and induces cytotoxicity in cancer cells via apoptosis

Tripeptide self assemblies in cell growth medium induce apoptosis and promoting cancer cell death at submicromolar concentration.

Photoresponsive gelators

We review the different approaches that have been used to form low molecular weight gels that respond to light.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Light and heat control over secondary structure and amyloid-like fiber formation in an overcrowded-alkene-modified Trp zipper

The external photocontrol over peptide folding, by the incorporation of molecular photoswitches into their structure, provides a powerful tool to study biological processes. However, it is limited so far to switches that exhibit only a rather limited geometrical change upon photoisomerization and that show thermal instability of the photoisomer. Here we describe the use of an overcrowded alkene photoswitch to control a model β-hairpin peptide. This photoresponsive unit undergoes a large conformational change and has two thermally stable isomers which has major influence on the secondary structure and the aggregation of the peptide, permitting the phototriggered formation of amyloid-like fibrils.

Preparation, characterization, and biocompatibility evaluation of poly(Nɛ-acryloyl-L-lysine)/hyaluronic acid interpenetrating network hydrogels

In the present study, poly(Nɛ-acryloyl-L-lysine)/hyaluronic acid (pLysAAm/HA) interpenetrating network (IPN) hydrogels were successfully fabricated through the combination of hydrazone bond crosslinking and photo-crosslinking reactions. The HA hydrogel network was first synthesized from 3,3'-dithiodipropionate hydrazide-modified HA and polyethylene glycol dilevulinate by hydrazone bond crosslinking. The pLysAAm hydrogel network was prepared from Nɛ-acryloyl-L-lysine and N,N'-bis(acryloyl)-(L)-cystine by photo-crosslinking. The resultant pLysAAm/HA hydrogels had a good shape recovery property after loading and unloading for 1.5 cycles (up to 90%) and displayed a highly porous microstructure. Their compressive moduli were at least 5 times higher than that of HA hydrogels. The pLysAAm/HA hydrogels had an equilibrium swelling ratio of up to 37.9 and displayed a glutathione-responsive degradation behavior. The results from in vitro biocompatibility evaluation with pre-osteoblasts MC3T3-E1 cells revealed that the pLysAAm/HA hydrogels could support cell viability and proliferation. Hematoxylin and eosin staining indicated that the pLysAAm/HA hydrogels allowed cell and tissue infiltration, confirming their good in vivo biocompatibility. Therefore, the novel pLysAAm/HA IPN hydrogels have great potential for bone tissue engineering applications.

Spatially resolved multicomponent gels

Multicomponent supramolecular systems could be used to prepare exciting new functional materials, but it is often challenging to control the assembly across multiple length scales. Here we report a simple approach to forming patterned, spatially resolved multicomponent supramolecular hydrogels. A multicomponent gel is first formed from two low-molecular-weight gelators and consists of two types of fibre, each formed by only one gelator. One type of fibre in this 'self-sorted network' is then removed selectively by a light-triggered gel-to-sol transition. We show that the remaining network has the same mechanical properties as it would have done if it initially formed alone. The selective irradiation of sections of the gel through a mask leads to the formation of patterned multicomponent networks, in which either one or two networks can be present at a particular position with a high degree of spatial control.

Graphene oxide based heparin-mimicking and hemocompatible polymeric hydrogels for versatile biomedical applications

Inspired from the chemical and biological benefits of heparinized hydrogels, this study presented the substituted hemocompatible design of graphene oxide based heparin-mimicking polymeric hydrogels for versatile biomedical applications.

Robust, highly elastic and bioactive heparin-mimetic hydrogels

We construct robust, highly elastic, and bioactive graphene oxide doped heparin-mimetic hydrogels for use in drug delivery and other potential biomedical applications.

Photodimerisation of a coumarin-dipeptide gelator

Photodimerisation of a coumarin-dipeptide can be used to increase the rheological properties of the hydrogels.

Tightening up the structure, lighting up the pathway: Application of molecular constraints and light to manipulate protein folding, self-assembly and function

Chemical cross-linking provides an effective avenue to reduce the conformational entropy of polypeptide chains and hence has become a popular method to induce or force structural formation in peptides and proteins. Recently, other types of molecular constraints, especially photoresponsive linkers and functional groups, have also found increased use in a wide variety of applications. Herein, we provide a concise review of using various forms of molecular strategies to constrain proteins, thereby stabilizing their native states, gaining insight into their folding mechanisms, and/or providing a handle to trigger a conformational process of interest with light. The applications discussed here cover a wide range of topics, ranging from delineating the details of the protein folding energy landscape to controlling protein assembly and function.

A self-assembled conformational switch: a host–guest stabilized triple stem molecular beacon via a photoactivated and thermal regeneration mode

A novel strategy for construction of a conformational switch is presented with a combination of DNA self-assembly and reversible host–guest inclusion interaction.