Engineering of molecularly imprinted cavity within 3D covalent organic frameworks: An innovation for enhanced extraction and removal of microcystins

The scarcity of selective adsorbents for efficient extraction and removal of microcystins (MCs) from complex samples greatly limits the precise detection and effective control of MCs. Three-dimensional covalent organic frameworks (3D COFs), characterized by their large specific surface areas and highly ordered rigid structure, are promising candidates, but suffer from lack of specific recognition. Herein, we design to engineer molecularly imprinted cavities within 3D COFs via molecularly imprinted technology, creating a novel adsorbent with exceptional selectivity, kinetics and capacity for the efficient extraction and removal of MCs. As proof-of-concept, a new CC bond-containing 3D COF, designated JNU-7, is designed and prepared for copolymerization with methacrylic acid, the pseudo template L-arginine and ethylene dimethacrylate to yield the JNU-7 based molecularly imprinted polymer (JNU-7-MIP). The JNU-7-MIP exhibits a great adsorption capacity (156 mg g-1) for L-arginine. Subsequently, the JNU-7-MIP based solid-phase extraction coupled with high performance liquid chromatography-mass spectrometry achieves low detection limit of 0.008 ng mL-1, wide linear range of 0.025-100 ng mL-1, high enrichment factor of 186, rapid extraction of 10 min, and good recoveries of 92.4%-106.5% for MC-LR. Moreover, the JNU-7-MIP can rapidly remove the MC-LR from 1 mg L-1 to levels (0.26-0.35 μg L-1) lower than the WHO recommended limit for drinking water (1 μg L-1). This work reveals the considerable potential of 3D COF based MIPs as promising adsorbents for the extraction and removal of contaminants in complex real samples.

Efficient removal of microcystin-LR from contaminated water using water-stable MIL-100(Fe) synthesized under HF-free conditions

Cyanobacterial algal hepatotoxins, called microcystins (MCs), are a global health concern, necessitating research on effective removal methods from contaminated water bodies. In this study, we synthesized non-fluorine MIL-100(Fe) using an environmentally friendly room-temperature method and utilized it as an adsorbent to effectively remove microcystin-LR (MC-LR), which is the most toxic MC congener. MIL-100(Fe) was thoroughly characterized, and its adsorption process was investigated under various conditions. Results revealed rapid MC-LR adsorption, achieving 93% removal in just 5 min, with the pseudo-second-order kinetic model indicating chemisorption as the primary mechanism. The Langmuir isotherm model demonstrated a monolayer sorption capacity of 232.6 µg g-1 at room temperature, showing favorable adsorption. Furthermore, the adsorption capacity increased from 183 µg g-1 at 20 °C to 311 µg g-1 at 40 °C, indicating an endothermic process. Thermodynamic parameters supported MC-LR adsorption's spontaneous and feasible nature onto MIL-100(Fe). This study highlights MIL-100(Fe) as a promising method for effectively removing harmful biological pollutants, such as MC-LR, from contaminated water bodies in an environmentally friendly manner.

Nanoparticles for Mitigation of Harmful Cyanobacterial Blooms

With the rapid advancement of nanotechnology and its widespread applications, increasing amounts of manufactured and natural nanoparticles (NPs) have been tested for their potential utilization in treating harmful cyanobacterial blooms (HCBs). NPs can be used as a photocatalyst, algaecide, adsorbent, flocculant, or coagulant. The primary mechanisms explored for NPs to mitigate HCBs include photocatalysis, metal ion-induced cytotoxicity, physical disruption of the cell membrane, light-shielding, flocculation/coagulation/sedimentation of cyanobacterial cells, and the removal of phosphorus (P) and cyanotoxins from bloom water by adsorption. As an emerging and promising chemical/physical approach for HCB mitigation, versatile NP-based technologies offer great advantages, such as being environmentally benign, cost-effective, highly efficient, recyclable, and adaptable. The challenges we face include cost reduction, scalability, and impacts on non-target species co-inhabiting in the same environment. Further efforts are required to scale up to real-world operations through developing more efficient, recoverable, reusable, and deployable NP-based lattices or materials that are adaptable to bloom events in different water bodies of different sizes, such as reservoirs, lakes, rivers, and marine environments.

Trap Inlaid Cationic Hybrid Composite Material for Efficient Segregation of Toxic Chemicals from Water

Metal-based oxoanions are potentially toxic pollutants that can cause serious water pollution. Therefore, the segregation of such species has recently received significant research attention. Even though several adsorbents have been employed for effective management of chemicals, their limited microporous nature along with non-monolithic applicability has thwarted their large-scale real-time application. Herein, we developed a unique anion exchangeable hybrid composite aerogel material (IPcomp-6), integrating a stable cationic metal-organic polyhedron with a hierarchically porous metal-organic gel. The composite scavenger demonstrated a highly selective and very fast segregation efficiency for various hazardous oxoanions such as, HAsO₄ ^2- , SeO₄ ^2- , ReO₄ ^- , CrO₄ ^2- , MnO₄ ^- , in water, in the presence of 100-fold excess of other coexisting anions. The material was able to selectively eliminate trace HAsO₄ ^2- even at low concentration to well below the As^V limit in drinking water defined by WHO.

Hierarchical porous metal–organic gels and derived materials: from fundamentals to potential applications

This review summarizes recent progress in the development and applications of metal–organic gels (MOGs) and their hybrids and derivatives dividing them into subclasses and discussing their synthesis, design and structure–property relationship.

Metal-Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications

Metal-organic frameworks (MOFs) have been widely recognized as one of the most fascinating classes of materials from science and engineering perspectives, benefiting from their high porosity and well-defined and tailored structures and components at the atomic level. Although their intrinsic micropores endow size-selective capability and high surface area, etc., the narrow pores limit their applications toward diffusion-control and large-size species involved processes. In recent years, the construction of hierarchically porous MOFs (HP-MOFs), MOF-based hierarchically porous composites, and MOF-based hierarchically porous derivatives has captured widespread interest to extend the applications of conventional MOF-based materials. In this Review, the recent advances in the design, synthesis, and functional applications of MOF-based hierarchically porous materials are summarized. Their structural characters toward various applications, including catalysis, gas storage and separation, air filtration, sewage treatment, sensing and energy storage, have been demonstrated with typical reports. The comparison of HP-MOFs with traditional porous materials (e.g., zeolite, porous silica, carbons, metal oxides, and polymers), subsisting challenges, as well as future directions in this research field, are also indicated.

Strong Foam-like Composites from Highly Mesoporous Wood and Metal-Organic Frameworks for Efficient CO2 Capture

Mechanical stability and multicycle durability are essential for emerging solid sorbents to maintain an efficient CO2 adsorption capacity and reduce cost. In this work, a strong foam-like composite is developed as a CO2 sorbent by the in situ growth of thermally stable and microporous metal-organic frameworks (MOFs) in a mesoporous cellulose template derived from balsa wood, which is delignified by using sodium chlorite and further functionalized by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation. The surface carboxyl groups in the TEMPO-oxidized wood template (TO-wood) facilitate the coordination of the cellulose network with multivalent metal ions and thus enable the nucleation and in situ growth of MOFs including copper benzene-1,3,5-tricarboxylate [Cu3(BTC)2], zinc 2-methylimidazolate, and aluminum benzene-1,3,5-tricarboxylate. The TO-wood/Cu3(BTC)2 composite shows a high specific surface area of 471 m2 g-1 and a high CO2 adsorption capacity of 1.46 mmol g-1 at 25 °C and atmospheric pressure. It also demonstrates high durability during the temperature swing cyclic CO2 adsorption/desorption test. In addition, the TO-wood/Cu3(BTC)2 composite is lightweight but exceptionally strong with a specific elastic modulus of 3034 kN m kg-1 and a specific yield strength of 68 kN m kg-1 under the compression test. The strong and durable TO-wood/MOF composites can potentially be used as a solid sorbent for CO2 capture, and their application can possibly be extended to environmental remediation, gas separation and purification, insulation, and catalysis.

Selection of Covalent Organic Framework Pore Functionalities for Differential Adsorption of Microcystin Toxin Analogues

Microcystins (MCs), produced by Microcystis sp, are the most commonly detected cyanotoxins in freshwater, and due to their toxicity, worldwide distribution, and persistence in water, an improvement in the monitoring programs for their early detection and removal from water is necessary. To this end, we investigate the performance of three covalent organic frameworks (COFs), TpBD-(CF₃)₂, TpBD-(NO₂)₂, and TpBD-(NH₂)₂, for the adsorption of the most common and/or toxic MC derivatives, MC-LR, MC-RR, MC-LA, and MC-YR, from water. While MC-LR and MC-YR can be efficiently adsorbed using all three COF derivatives, high adsorption efficiencies were found for the most lipophilic toxin, MC-LA, with TpBD-(NH₂)₂, and the most hydrophilic one, MC-RR, with TpBD-(NO₂). Theoretical calculations revealed that MC-LA and MC-RR have a tendency to be located mainly on the COF surface, interacting through hydrogen bonds with the amino and nitro functional groups of TpBD-(NH₂)₂ and TpBD-(NO₂)₂, respectively. TpBD-(NO₂)₂ outperforms the adsorbent materials reported for the capture of MC-RR, resulting in an increase in the maximum adsorption capacity by one order of magnitude. TpBD-(NH₂)₂ is reported as the first efficient adsorbent material for the capture of MC-LA. Large differences in desorption efficiencies were observed for the MCs with different COFs, highlighting the importance of COF-adsorbate interactions in the material recovery. Herein we show that efficient capture of these toxins from water can be achieved through the proper selection of the COF material. More importantly, this study demonstrates that by careful choice of COF functionalities, specific compounds can be targeted or excluded from a group of analogues, providing insight into the design of more efficient and selective adsorbent materials.

CO2 gas separation using mixed matrix membranes based on polyethersulfone/MIL-100(Al)

The excessive use of natural gas and other fossil fuels by the industrial sector leads to the production of great quantities of gas pollutants, including CO2, SO2, and NO x . Consequently, these gases increase the temperature of the earth, producing global warming. Different strategies have been developed to help overcome this problem, including the utilization of separation membrane technology. Mixed matrix membranes (MMMs) are hybrid membranes that combine an organic polymer as a matrix and an inorganic compound as a filler. In this study, MMMs were prepared based on polyethersulfone (PES) and a type of metal–organic framework (MOF), Materials of Institute Lavoisier (MIL)-100(Al) [Al3O(H2O)2(OH)(BTC)2] (BTC: benzene 1,3,5-tricarboxylate) using a phase inversion method. The influence on the properties of the produced membranes by addition of 5, 10, 20, and 30% MIL-100(Al) (w/w) to the PES was also investigated. Fourier-transform infrared spectroscopy (FTIR) analysis indicated that no chemical interactions occurred between PES and MIL-100(Al). Scanning electron microscope (SEM) images showed agglomeration at PES/MIL-100(Al) 30% (w/w) and that the thickness of the dense layer increased up to 3.70 µm. After the addition of MIL-100(Al) of 30% (w/w), the permeability of the MMMs for CO2, O2, and N2 gases was enhanced by approximately 16, 26, and 14 times, respectively, as compared with a neat PES membrane. The addition of MIL-100(Al) to PES increased the thermal stability of the membranes, reaching 40°C as indicated by thermogravimetry analysis (TGA). An addition of 20% MIL-100(Al) (w/w) increased membrane selectivity for CO2/O2 from 2.67 to 4.49 (approximately 68.5%), and the addition of 10% MIL-100(Al) increased membrane selectivity for CO2/N2 from 1.01 to 2.12 (approximately 110.1%).

Hierarchically porous metal-organic frameworks: synthesis strategies, structure(s), and emerging applications in decontamination

Metal-organic frameworks (MOFs) with high porosity have received much attention as promising materials for many applications owing to their unique properties. However, to date, most of the reported MOFs have microporous structures, which slow down diffusion/mass transfer and limit the accessibility of bulky molecules to its internal surface. Thus, it is crucial to develop an efficient way to create larger pores (mesoporous and/or macroporous) into microporous MOFs to form hierarchical porous metal-organic frameworks (HP-MOFs), which facilitate the diffusion and mass transfer of guest molecules. HP-MOFs are excellent and promising candidates for environmental applications under the background of environmental contaminations. In this review paper, we are primarily focusing on the latest progress in the preparation of HP-MOFs by employing template-assisted and template-free synthetic approaches for environmental cleaning applications. Particularly, the adsorptive purification of the most common toxic substances, including gases, dyes, heavy metal ions, and antibiotics from the environment using HP-MOFs as adsorbents is briefly discussed. The overall results clearly showed that the superiority of HP-MOFs compared with conventional microporous MOFs. Finally, we summarize the remaining challenges and provide personal perspectives on possible future development of HP-MOFs.

Metal-organic framework gels and monoliths

The synthesis of metal-organic frameworks (MOFs) has, to date, largely been in the form of crystalline powders. However, interest in different physical morphologies of this class of materials is growing. In this perspective, we provide an overview of the structure, properties and applications of MOF monoliths. In particular, we explore the complex synthetic landscapes associated with MOF crystallization and discuss the synthetic factors leading to the formation of MOF gels, i.e. the precursor to sol-gel MOF monoliths. Finally, we provide our thoughts on the future development of this field, and attempt to highlight the importance of the MOF gel state in the discovery of new functional materials.

Metal-Organic Gels Based on a Bisamide Tetracarboxyl Ligand for Carbon Dioxide, Sulfur Dioxide, and Selective Dye Uptake

A metal-organic gel (metallogel) based on the new tetracarboxyl ligand N¹, N⁴-(diterephthalic acid)terephthalamide in combination with chromium(III) has been converted into its xero- and aerogel and demonstrated to have excellent specific sorption properties for dyes in its metallogel state, where fuchsine is adsorbed faster than the two other dyes, calcein and disulfine blue, and for water, sulfur dioxide and carbon dioxide in its xero- and aerogel state. The metallogel showed very good shape retention and could be extruded from molds in designed shapes. In a rheology experiment, the storage modulus was determined to be 1440 Pa, and the metallogel is elastic up to 3 Hz, breaking at strains higher than 0.3%. Additional metallogels utilizing the same ligand with a wide range of metal ions (Al(III), Fe(III), Co(III), In(III), and Hg(II)) have also been synthesized, and the aluminum and mixed aluminum-chromium derivative were also converted into its aerogel. The highly porous Cr, Al, and AlCr metal-organic aerogels proved stable against water vapor in a physisorption experiment and were used to model breakthrough curves for SO₂/CO₂ gas mixtures with the idealized adsorbed solution theory from their physisorption isotherms. The breakthrough simulation utilized SO₂/CO₂ equivalencies from a real world application and showed effective retention of SO₂ from the gas mixture. Furthermore, the materials in this work exhibit the highest SO₂ uptake values for metal-organic aerogels so far (up to 116.8 cm³ g^-1, or 23.4 wt %).

Simultaneous efficient adsorption and accelerated photocatalytic degradation of chlortetracycline hydrochloride over novel Fe-based MOGs under visible light irradiation assisted by hydrogen peroxide

Two novel porous MOGs were prepared for degrading CTC, and JLUE-MOG-1 exhibited an enhanced performance because of the photo-Fenton synergistic effect.

Conjugated microporous polymer nanosheets and nanotubes as novel absorbents for microcystin-LR: insights from theoretical investigations

Our calculations demonstrated that CMP nanosheet and nanotube materials can be developed as novel adsorbents for harmful microcystin-LR adsorption/removal.

Ultraviolet photosensitized transformation mechanism of microcystin-LR by natural organic matter in raw water

Microcystins (MCs), produced by cyanobacterial blooms in eutrophic water, are common toxic metabolites and a potential threat to human health. However, the mechanism of MC photodegradation by photosensitizers in raw water remains unclear. In photodegradation and quenching experiments, this study investigates the photosensitized degradation of microcystin-LR (MC-LR) by fulvic acid (FA, a kind of dissolved organic matter with natural photosensitizing properties) under ultraviolet (UV) light irradiation. The photodegradation mechanisms of FA are also explored. The photodegradation process of MC-LR by FA was consistent with second-order reaction kinetics. The degradation rate of MC-LR in FA decreased from 80% to 55% as the pH increased from 3 to 9, because the binding ability of FA to MC-LR reduces as the pH increases. Given that FA can both inhibit and promote MC-LR degradation depending on its concentration, the optimum initial FA concentration for degrading MC-LR was determined as 9.86 mgC·L^-1. The excited triplet state of FA (³FA^∗) accounted for 50.12% of the MC-LR loss; the remaining loss (49.88%) was contributed by reactive oxygen species and direct photolysis. This implies that the main pathway of MC-LR degradation is reaction with ³FA^∗. The MC-LR degradation rate is 36% higher under UV irradiation than that under simulated sunlight irradiation.

MIL-100(Al) Gels as an Excellent Platform Loaded with Doxorubicin Hydrochloride for pH-Triggered Drug Release and Anticancer Effect

Slow and controlled release systems for drugs have attracted increasing interest recently. A highly efficient metal-organic gel (MOGs) drug delivery carrier, i.e., MIL-100(Al) gel, has been fabricated by a facile, low cost, and environmentally friendly one-pot process. The unique structure of MIL-100(Al) gels has led to a high loading efficiency (620 mg/g) towards doxorubicin hydrochloride (DOX) as a kind of anticancer drug. DOX-loaded MOGs exhibited high stability under physiological conditions and sustained release capacity of DOX for up to three days (under acidic environments). They further showed sustained drug release behavior and excellent antitumor effects in in vitro experiments on HeLa cells, in contrast with the extremely low biotoxicity of MOGs. Our work provides a promising way for anticancer therapy by utilizing this MOGs-based drug delivery system as an efficient and safe vehicle.

A water-stable Tb(iii)-based metal–organic gel (MOG) for detection of antibiotics and explosives

A luminescent Tb-based metal organic gel was prepared by in situ metal node metathesis and it exhibited sensitive detection ability effectively towards antibiotics and explosives in water.

Gel-based morphological design of zirconium metal-organic frameworks

The ability of metal-organic frameworks (MOFs) to gelate under specific synthetic conditions opens up new opportunities in the preparation and shaping of hierarchically porous MOF monoliths, which could be directly implemented for catalytic and adsorptive applications. In this work, we present the first examples of xero- or aerogel monoliths consisting solely of nanoparticles of several prototypical Zr4+-based MOFs: UiO-66-X (X = H, NH2, NO2, (OH)2), UiO-67, MOF-801, MOF-808 and NU-1000. High reactant and water concentrations during synthesis were observed to induce the formation of gels, which were converted to monolithic materials by drying in air or supercritical CO2. Electron microscopy, combined with N2 physisorption experiments, was used to show that irregular nanoparticle packing leads to pure MOF monoliths with hierarchical pore systems, featuring both intraparticle micropores and interparticle mesopores. Finally, UiO-66 gels were shaped into monolithic spheres of 600 μm diameter using an oil-drop method, creating promising candidates for packed-bed catalytic or adsorptive applications, where hierarchical pore systems can greatly mitigate mass transfer limitations.

Al-Based coordination polymer nanotubes: simple preparation, post-modification and application in Fe3+ ions sensing

Aluminum-based coordination polymers, MIL-110(Al) nanotubes, were successfully prepared from a mixed solution of methanol and ethanol with the volume ratio of 10 : 10 at room temperature in the absence of any template or surfactant; AlCl₃ and sodium 1,3,5-benzenetricarboxylate (Na₃BTC) were employed as the initial reactants.

High-internal-phase emulsions stabilized by metal-organic frameworks and derivation of ultralight metal-organic aerogels

To design high-internal-phase emulsion (HIPE) systems is of great interest from the viewpoints of both fundamental researches and practical applications. Here we demonstrate for the first time the utilization of metal-organic framework (MOF) for HIPE formation. By stirring the mixture of water, oil and MOF at room temperature, the HIPE stabilized by the assembly of MOF nanocrystals at oil-water interface could be formed. The MOF-stabilized HIPE provides a novel route to produce highly porous metal-organic aerogel (MOA) monolith. After removing the liquids from the MOF-stabilized HIPE, the ultralight MOA with density as low as 0.01 g·cm(-3) was obtained. The HIPE approach for MOA formation has unique advantages and is versatile in producing different kinds of ultralight MOAs with tunable porosities and structures.

Metal-organic gel templated synthesis of magnetic porous carbon for highly efficient removal of organic dyes

Magnetic porous carbon composites are promising materials in various applications, such as adsorbents, supercapacitors and catalyst supports, due to their high surface area, thermal and chemical stability, and easy separation. However, despite the increasing number of reports of magnetic porous carbon composites, the preparation of these materials with environmentally friendly procedures still remains a great challenge. Herein, we report a facile method to prepare a magnetic porous carbon composite with high surface area from a Fe-based metal-organic gel (MOG) template, an extended structure of a metal-organic framework (MOF). The obtained magnetic porous carbon composite was applied to remove organic dyes from an aqueous solution by selecting methyl orange (MO) as a model molecule. It exhibits excellent adsorption capacity (182.82 mg g(-1)), fast adsorption kinetics (8.13 × 10(-3) g mg(-1) min(-1)), and a perfect magnetic separation performance for the MO removal. This study demonstrates a new way to achieve clean synthesis of magnetic porous carbon materials, and opens a new door for the application of MOGs in organic dye removal.

Improved synthesis of trigone trimer cluster metal organic framework MIL-100Al by a later entry of methyl groups

Later entry of methyl or ethyl groups was carried out for the economical synthesis of trigone trimer cluster MIL-100Al oriented from H3BTC directly. The pure phase MIL-100Al was obtained in a DMF aqueous solution, and equal amounts of methyl and carboxyl groups are the key for the successful synthesis of MIL-100Al.

Facile and economical synthesis of porous activated semi-cokes for highly efficient and fast removal of microcystin-LR

To mitigate the threat of microcystins on the environment and human health, we demonstrate for the first time that porous activated semi-cokes (ASCs) with average pore diameters of 2-20 nm could be used as adsorbents for the fast and efficient removal of microcystin-LR (MC-LR). The surface physicochemical properties of ASCs were carefully investigated and their relations with the adsorption performance were discussed. The results showed that ASCs activated by HNO3 and KOH exhibited excellent adsorption capacities of 4276 and 8430 μg/g, respectively, which were nearly 5 times and 10 times higher than that of activated carbon (AC). ASCs also showed a fast adsorption property by over 95% recovery of MC-LR in the initial 10 min. The overall adsorption of MC-LR on ASCs might be dominated by both external diffusion and intra-particle diffusion. In addition, ASCs manifested an outstanding reusability and the adsorption of MC-LR was hardly influenced by the coexisting fulvic acid at low concentration. Given the remarkable performance and low cost, activated semi-cokes are expected to present promising potentials for the practical application in removing microcystins from aqueous solutions.

Multifunctional Supramolecular Hybrid Materials Constructed from Hierarchical Self-Ordering of In Situ Generated Metal-Organic Framework (MOF) Nanoparticles

A synergistic approach is described to engineer supramolecular hybrid materials based on metal-organic frameworks, encompassing HKUST-1 nanoparticles formed in situ, coexisting with an electrically conducting gel fiber network. The following findings are made: i) multistimuli-responsive structural transformation via reversible sol-gel switching and ii) radical conversion of a soft hybrid gel into a mechanically malleable, viscoelastic matter.

Hierarchical heteroaggregation of binary metal-organic gels with tunable porosity and mixed valence metal sites for removal of dyes in water

Hierarchical heteronuclear metal-organic gels (MOGs) based on iron (Fe) and aluminium (Al) metal-organic framework (MOF) backbones bridged by tri-carboxylate ligands have firstly been synthesized by simple solvothermal method. Monometallic MOGs based on Fe or Al give homogenous monoliths, which have been tuned by introduction of heterogeneity in the system (mismatched growth). The developed gels demonstrate that surface areas, pore volumes and pore sizes can be readily tuned by optimizing heterogeneity. The work also elaborates effect of heterogeneity on size of MOG particles which increase substantially with increasing heterogeneity as well as obtaining mixed valence sites in the gels. High surface areas (1861 m²/g) and pore volumes (9.737 cc/g) were obtained for heterogeneous gels (0.5Fe-0.5Al). The large uptakes of dye molecules (290 mg/g rhodamine B and 265 mg/g methyl orange) with fast sorption kinetics in both neutral and acidic mediums show good stability and accessibility of MOG channels (micro and meso-/macropores), further demonstrating their potential applications in catalysis and sorption of large molecules.

Protonated mesoporous graphitic carbon nitride for rapid and highly efficient removal of microcystins

A novel biomaterial, protonated mesoporous graphitic carbon nitride (mpg-C₃N₄–H⁺) which is fabricated by treating mpg-C₃N₄ with concentrated hydrochloric acid, is applied as a promising bioadsorbent for the uptake of microcystins (MCs).

Nitrogen-doped porous carbon derived from metal-organic gel for electrochemical analysis of heavy-metal ion

A nitrogen-doped porous carbon material (N@MOG-C) was prepared by simple pyrolysis of polypyrrole-doped Al-based metal-organic gel (PPy@MOG) at 800 °C. The N@MOG-C possessed a uniform three-dimensional (3-D) interconnected mesoporous structure with a high surface area of 1542.6 m(2) g(-1) and a large pore volume of 0.76 cm(3) g(-1). By using an ionic liquid (IL) to immobilize N@MOG-C on electrode surface, the N@MOG-C was further used for sensitive detection of heavy metal ion. The doping of nitrogen-endowed N@MOG-C with faster electron transfer kinetics than other carbon materials such as MOG-C, multiwalled carbon nanotubes, and graphene. The N@MOG-C-modified electrode showed a high effective area, because of the porous structure. Under optimized conditions, the N@MOG-C-based sensor could detect Cd ions present in concentrations of 0.025-5 μM, with a detection limit of 2.2 nM. The mesoporous structure, fast electron transfer ability, and simple and green synthesis of N@MOG-C made it a promising electrode material for practical applications in heavy-metal-ion sensing.